Skip to contentSkip to conversation

dt-bindings: pinctrl: imx8ulp: Add pinctrl binding

PATCH In review Jacky Bai 4 participants 7 messages Jun 7, 2021 – Jul 23, 2021

Subsystems (5)
lore
Share & tools
lore

Jacky Bai

author maintainer
#0 lore raw

PATCH v2 1/2 dt-bindings: pinctrl: imx8ulp: Add pinctrl binding

Add pinctrl binding doc for i.MX8ULP

---
- v2 changes:
update the compatible string to align with driver side. fix a typo in title

---
 .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml new file +79 -0
new file mode 100644
index 000000000000..86622c4f374b
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8ULP IOMUX Controller
+
+maintainers:
+  - Jacky Bai <[email protected]>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8ulp-iomuxc1
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 5 integers and represents the mux and config
+          setting for one pin. The first 4 integers <mux_config_reg input_reg
+          mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8ULP Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_config_reg" indicates the offset of mux register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_mode" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@298c0000 {
+        compatible = "fsl,imx8ulp-iomuxc1";
+        reg = <0x298c0000 0x10000>;
+
+        pinctrl_lpuart5: lpuart5grp {
+            fsl,pins =
+                <0x0138 0x08F0 0x4 0x3	0x3>,
+                <0x013C 0x08EC 0x4 0x3	0x3>;
+        };
+    };
+
+...
Signature · 1 line
2.26.2
author maintainer
#1 lore raw

PATCH v2 2/2 pinctrl: imx8ulp: Add pinctrl driver support

From: Anson Huang <[email protected]>

Add i.MX8ULP pinctrl driver support.

---
- v2 changes:
remove the an useless 'if' condition check

---
 drivers/pinctrl/freescale/Kconfig           |   7 +
 drivers/pinctrl/freescale/Makefile          |   1 +
 drivers/pinctrl/freescale/pinctrl-imx8ulp.c | 274 ++++++++++++++++++++
 3 files changed, 282 insertions(+)
 create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8ulp.c
drivers/pinctrl/freescale/Kconfig +7 -0
index f294336430cc..21fa21c6547b 100644
@@ -166,6 +166,13 @@ config PINCTRL_IMX8DXL
 	help
 	  Say Y here to enable the imx8dxl pinctrl driver
 
+config PINCTRL_IMX8ULP
+	tristate "IMX8ULP pinctrl driver"
+	depends on ARCH_MXC
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx8ulp pinctrl driver
+
 config PINCTRL_VF610
 	bool "Freescale Vybrid VF610 pinctrl driver"
 	depends on SOC_VF610
drivers/pinctrl/freescale/Makefile +1 -0
index e476cb671037..c44930b1b362 100644
@@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL_IMX8MQ)	+= pinctrl-imx8mq.o
 obj-$(CONFIG_PINCTRL_IMX8QM)	+= pinctrl-imx8qm.o
 obj-$(CONFIG_PINCTRL_IMX8QXP)	+= pinctrl-imx8qxp.o
 obj-$(CONFIG_PINCTRL_IMX8DXL)	+= pinctrl-imx8dxl.o
+obj-$(CONFIG_PINCTRL_IMX8ULP)	+= pinctrl-imx8ulp.o
 obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
drivers/pinctrl/freescale/pinctrl-imx8ulp.c new file +274 -0

274 lines not on this page · raw message

Signature · 1 line
2.26.2
maintainer Reviewed-by on v2 2/2
#2 lore raw

RE: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver support

Quoted 10 lines

From: Jacky Bai <[email protected]>
Sent: Monday, June 7, 2021 2:11 PM
Subject: [PATCH v2 2/2] pinctrl: imx8ulp: Add pinctrl driver support

From: Anson Huang <[email protected]>

Add i.MX8ULP pinctrl driver support.

Regards
Aisheng