Skip to contentSkip to conversation

Add Rockchip SFC(serial flash controller) support

PATCH Superseded Jon Lin 2 participants 11 messages Jun 11, 2021 – Jun 24, 2021

Subsystems (5)

v8 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Jon Lin

author
#0 lore raw

v8 cover Add Rockchip SFC(serial flash controller) support

Changes in v8:
- Fix indent 4 to 2 in yaml

Changes in v7:
- Fix up the sclk_sfc parent error in rk3036
- Unify to "rockchip,sfc" compatible id because all the feature update will have a new IP version, so the driver is used for the SFC IP in all SoCs
- Change to use node "sfc" to name the SFC pinctrl group
- Add subnode reg property check
- Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
- Limit max_iosize to 32KB

Changes in v6:
- Add support in device trees for rv1126(Declared in series 5 but not submitted)
- Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not affect interpretation and has been widely used
- Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
- Simplify the code, such as remove "rockchip_sfc_register_all"(Declared in series 5 but not submitted)
- Support SFC ver4 ver5(Declared in series 5 but not submitted)
- Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
- Change to use devm_spi_alloc_master and spi_unregister_master

Changes in v5:
- Add support in device trees for rv1126
- Support sfc tx_dual, tx_quad
- Simplify the code, such as remove "rockchip_sfc_register_all"
- Support SFC ver4 ver5

Changes in v4:
- Changing patch back to an "RFC". An engineer from Rockchip reached out to me to let me know they are working on this patch for upstream, I am submitting this v4 for the community to see however I expect Jon Lin ([email protected]) will submit new patches soon and these are the ones we should pursue for mainlining. Jon's patch series should include support for more hardware than this series.
- Clean up documentation more and ensure it is correct per make dt_binding_check.
- Add support in device trees for rk3036, rk3308, and rv1108.
- Add ahb clock (hclk_sfc) support for rk3036.
- Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
- Change IRQ code to only mark IRQ as handled if it handles the specific IRQ (DMA transfer finish) it is supposed to handle.

Changes in v3:
- Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
- Changed the compatible string from rockchip,sfc to rockchip,rk3036-sfc. A quick glance at the datasheets suggests this driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and RV1108 SoCs, and possibly more. However, I am currently only able to test this on a PX30 (an RK3326). The technical reference manuals appear to list the same registers for each device.
- Corrected devicetree documentation for formatting and to note these changes.
- Replaced the maintainer with Heiko Stuebner and myself, as we will take ownership of this going forward.
- Noted that the device (per the reference manual) supports 4 CS, but I am only able to test a single CS (CS 0).
- Reordered patches to comply with upstream rules.

Changes in v2:
- Reimplemented driver using spi-mem subsystem.
- Removed power management code as I couldn't get it working properly.
- Added device tree bindings for Odroid Go Advance.

Changes in v1:
hanges made in this new series versus the v8 of the old series:
- Added function to read spi-rx-bus-width from device tree, in the event that the SPI chip supports 4x mode but only has 2 pins wired (such as the Odroid Go Advance).
- Changed device tree documentation from txt to yaml format.
- Made "reset" message a dev_dbg from a dev_info.
- Changed read and write fifo functions to remove redundant checks.
- Changed the write and read from relaxed to non-relaxed when starting the DMA transfer or reading the DMA IRQ.
- Changed from dma_coerce_mask_and_coherent to just dma_set_mask_and_coherent.
- Changed name of get_if_type to rockchip_sfc_get_if_type.

Chris Morgan (8):
dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash
controller
spi: rockchip-sfc: add rockchip serial flash controller
arm64: dts: rockchip: Add SFC to PX30
clk: rockchip: Add support for hclk_sfc on rk3036
arm: dts: rockchip: Add SFC to RK3036
arm: dts: rockchip: Add SFC to RV1108
arm64: dts: rockchip: Add SFC to RK3308
arm64: dts: rockchip: Enable SFC for Odroid Go Advance

Jon Lin (1):
clk: rockchip: rk3036: fix up the sclk_sfc parent error

 .../devicetree/bindings/spi/rockchip-sfc.yaml |  88 +++
 arch/arm/boot/dts/rk3036.dtsi                 |  42 ++
 arch/arm/boot/dts/rv1108.dtsi                 |  37 +
 arch/arm64/boot/dts/rockchip/px30.dtsi        |  38 +
 arch/arm64/boot/dts/rockchip/rk3308.dtsi      |  37 +
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   |  16 +
 drivers/clk/rockchip/clk-rk3036.c             |   5 +-
 drivers/spi/Kconfig                           |   9 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-rockchip-sfc.c                | 676 ++++++++++++++++++
 include/dt-bindings/clock/rk3036-cru.h        |   1 +
 11 files changed, 948 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
 create mode 100644 drivers/spi/spi-rockchip-sfc.c
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v8 1/9 dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash controller

From: Chris Morgan <[email protected]>

Add bindings for the Rockchip serial flash controller. New device specific parameter of rockchip,sfc-no-dma included in documentation.

---

Changes in v8:
- Fix indent 4 to 2 in yaml

Changes in v7:
- Fix up the sclk_sfc parent error in rk3036
- Unify to "rockchip,sfc" compatible id because all the feature update will have a new IP version, so the driver is used for the SFC IP in all SoCs
- Change to use node "sfc" to name the SFC pinctrl group
- Add subnode reg property check
- Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
- Limit max_iosize to 32KB

Changes in v6:
- Add support in device trees for rv1126(Declared in series 5 but not submitted)
- Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not affect interpretation and has been widely used
- Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
- Simplify the code, such as remove "rockchip_sfc_register_all"(Declared in series 5 but not submitted)
- Support SFC ver4 ver5(Declared in series 5 but not submitted)
- Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
- Change to use devm_spi_alloc_master and spi_unregister_master

Changes in v5:
- Add support in device trees for rv1126
- Support sfc tx_dual, tx_quad
- Simplify the code, such as remove "rockchip_sfc_register_all"
- Support SFC ver4 ver5

Changes in v4:
- Changing patch back to an "RFC". An engineer from Rockchip reached out to me to let me know they are working on this patch for upstream, I am submitting this v4 for the community to see however I expect Jon Lin ([email protected]) will submit new patches soon and these are the ones we should pursue for mainlining. Jon's patch series should include support for more hardware than this series.
- Clean up documentation more and ensure it is correct per make dt_binding_check.
- Add support in device trees for rk3036, rk3308, and rv1108.
- Add ahb clock (hclk_sfc) support for rk3036.
- Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
- Change IRQ code to only mark IRQ as handled if it handles the specific IRQ (DMA transfer finish) it is supposed to handle.

Changes in v3:
- Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
- Changed the compatible string from rockchip,sfc to rockchip,rk3036-sfc. A quick glance at the datasheets suggests this driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and RV1108 SoCs, and possibly more. However, I am currently only able to test this on a PX30 (an RK3326). The technical reference manuals appear to list the same registers for each device.
- Corrected devicetree documentation for formatting and to note these changes.
- Replaced the maintainer with Heiko Stuebner and myself, as we will take ownership of this going forward.
- Noted that the device (per the reference manual) supports 4 CS, but I am only able to test a single CS (CS 0).
- Reordered patches to comply with upstream rules.

Changes in v2:
- Reimplemented driver using spi-mem subsystem.
- Removed power management code as I couldn't get it working properly.
- Added device tree bindings for Odroid Go Advance.

Changes in v1:
hanges made in this new series versus the v8 of the old series:
- Added function to read spi-rx-bus-width from device tree, in the event that the SPI chip supports 4x mode but only has 2 pins wired (such as the Odroid Go Advance).
- Changed device tree documentation from txt to yaml format.
- Made "reset" message a dev_dbg from a dev_info.
- Changed read and write fifo functions to remove redundant checks.
- Changed the write and read from relaxed to non-relaxed when starting the DMA transfer or reading the DMA IRQ.
- Changed from dma_coerce_mask_and_coherent to just dma_set_mask_and_coherent.
- Changed name of get_if_type to rockchip_sfc_get_if_type.

 .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
Documentation/devicetree/bindings/spi/rockchip-sfc.yaml new file +88 -0
new file mode 100644
index 000000000000..162993a97290
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+  - Heiko Stuebner <[email protected]>
+  - Chris Morgan <[email protected]>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,sfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: clk_sfc
+      - const: hclk_sfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    description: Disable DMA and utilize FIFO mode only
+    type: boolean
+
+patternProperties:
+  "^flash@[0-3]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    sfc: spi@ff3a0000 {
+        compatible = "rockchip,sfc";
+        reg = <0xff3a0000 0x4000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+        clock-names = "clk_sfc", "hclk_sfc";
+        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+        pinctrl-names = "default";
+        power-domains = <&power PX30_PD_MMC_NAND>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <108000000>;
+            spi-rx-bus-width = <2>;
+            spi-tx-bus-width = <2>;
+        };
+    };
+
+...
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH v8 1/9] dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash controller

Quoted 11 lines · Jon Lin

From: Chris Morgan <[email protected]>

Add bindings for the Rockchip serial flash controller. New device specific parameter of rockchip,sfc-no-dma included in documentation.

---

Changes in v8:
- Fix indent 4 to 2 in yaml

My comments from v7 remain.

Quoted 184 lines

Changes in v7:
- Fix up the sclk_sfc parent error in rk3036
- Unify to "rockchip,sfc" compatible id because all the feature update will have a new IP version, so the driver is used for the SFC IP in all SoCs
- Change to use node "sfc" to name the SFC pinctrl group
- Add subnode reg property check
- Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
- Limit max_iosize to 32KB

Changes in v6:
- Add support in device trees for rv1126(Declared in series 5 but not submitted)
- Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not affect interpretation and has been widely used
- Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
- Simplify the code, such as remove "rockchip_sfc_register_all"(Declared in series 5 but not submitted)
- Support SFC ver4 ver5(Declared in series 5 but not submitted)
- Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
- Change to use devm_spi_alloc_master and spi_unregister_master

Changes in v5:
- Add support in device trees for rv1126
- Support sfc tx_dual, tx_quad
- Simplify the code, such as remove "rockchip_sfc_register_all"
- Support SFC ver4 ver5

Changes in v4:
- Changing patch back to an "RFC". An engineer from Rockchip reached out to me to let me know they are working on this patch for upstream, I am submitting this v4 for the community to see however I expect Jon Lin ([email protected]) will submit new patches soon and these are the ones we should pursue for mainlining. Jon's patch series should include support for more hardware than this series.
- Clean up documentation more and ensure it is correct per make dt_binding_check.
- Add support in device trees for rk3036, rk3308, and rv1108.
- Add ahb clock (hclk_sfc) support for rk3036.
- Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
- Change IRQ code to only mark IRQ as handled if it handles the specific IRQ (DMA transfer finish) it is supposed to handle.

Changes in v3:
- Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
- Changed the compatible string from rockchip,sfc to rockchip,rk3036-sfc. A quick glance at the datasheets suggests this driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and RV1108 SoCs, and possibly more. However, I am currently only able to test this on a PX30 (an RK3326). The technical reference manuals appear to list the same registers for each device.
- Corrected devicetree documentation for formatting and to note these changes.
- Replaced the maintainer with Heiko Stuebner and myself, as we will take ownership of this going forward.
- Noted that the device (per the reference manual) supports 4 CS, but I am only able to test a single CS (CS 0).
- Reordered patches to comply with upstream rules.

Changes in v2:
- Reimplemented driver using spi-mem subsystem.
- Removed power management code as I couldn't get it working properly.
- Added device tree bindings for Odroid Go Advance.

Changes in v1:
hanges made in this new series versus the v8 of the old series:
- Added function to read spi-rx-bus-width from device tree, in the event that the SPI chip supports 4x mode but only has 2 pins wired (such as the Odroid Go Advance).
- Changed device tree documentation from txt to yaml format.
- Made "reset" message a dev_dbg from a dev_info.
- Changed read and write fifo functions to remove redundant checks.
- Changed the write and read from relaxed to non-relaxed when starting the DMA transfer or reading the DMA IRQ.
- Changed from dma_coerce_mask_and_coherent to just dma_set_mask_and_coherent.
- Changed name of get_if_type to rockchip_sfc_get_if_type.

 .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
Documentation/devicetree/bindings/spi/rockchip-sfc.yaml new file +88 -0
new file mode 100644
index 000000000000..162993a97290
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+  - Heiko Stuebner <[email protected]>
+  - Chris Morgan <[email protected]>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,sfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: clk_sfc
+      - const: hclk_sfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    description: Disable DMA and utilize FIFO mode only
+    type: boolean
+
+patternProperties:
+  "^flash@[0-3]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    sfc: spi@ff3a0000 {
+        compatible = "rockchip,sfc";
+        reg = <0xff3a0000 0x4000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+        clock-names = "clk_sfc", "hclk_sfc";
+        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+        pinctrl-names = "default";
+        power-domains = <&power PX30_PD_MMC_NAND>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <108000000>;
+            spi-rx-bus-width = <2>;
+            spi-tx-bus-width = <2>;
+        };
+    };
+
+...
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v8 2/9 spi: rockchip-sfc: add rockchip serial flash controller

In reply to Jon Lin

From: Chris Morgan <[email protected]>

Add the rockchip serial flash controller (SFC) driver.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/spi/Kconfig            |   9 +
 drivers/spi/Makefile           |   1 +
 drivers/spi/spi-rockchip-sfc.c | 676 +++++++++++++++++++++++++++++++++
 3 files changed, 686 insertions(+)
 create mode 100644 drivers/spi/spi-rockchip-sfc.c
drivers/spi/Kconfig +9 -0
index e71a4c514f7b..d89e5f3c9107 100644
@@ -658,6 +658,15 @@ config SPI_ROCKCHIP
 	  The main usecase of this controller is to use spi flash as boot
 	  device.
 
+config SPI_ROCKCHIP_SFC
+	tristate "Rockchip Serial Flash Controller (SFC)"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM && HAS_DMA
+	help
+	  This enables support for Rockchip serial flash controller. This
+	  is a specialized controller used to access SPI flash on some
+	  Rockchip SOCs.
+
 config SPI_RB4XX
 	tristate "Mikrotik RB4XX SPI master"
 	depends on SPI_MASTER && ATH79
drivers/spi/Makefile +1 -0
index 13e54c45e9df..699db95c8441 100644
@@ -95,6 +95,7 @@ obj-$(CONFIG_SPI_QCOM_GENI)		+= spi-geni-qcom.o
 obj-$(CONFIG_SPI_QCOM_QSPI)		+= spi-qcom-qspi.o
 obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+obj-$(CONFIG_SPI_ROCKCHIP_SFC)		+= spi-rockchip-sfc.o
 obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_MACH_REALTEK_RTL)		+= spi-realtek-rtl.o
 obj-$(CONFIG_SPI_RPCIF)			+= spi-rpc-if.o
drivers/spi/spi-rockchip-sfc.c new file +676 -0

676 lines not on this page · raw message

Signature · 1 line
2.17.1
author
#4 lore raw

PATCH v8 3/9 arm64: dts: rockchip: Add SFC to PX30

In reply to Jon Lin

From: Chris Morgan <[email protected]>

Add a devicetree entry for the Rockchip SFC for the PX30 SOC.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 arch/arm64/boot/dts/rockchip/px30.dtsi | 38 ++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
arch/arm64/boot/dts/rockchip/px30.dtsi +38 -0
index 09baa8a167ce..d854f2577067 100644
@@ -966,6 +966,18 @@
 		status = "disabled";
 	};
 
+	sfc: spi@ff3a0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff3a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
 	nfc: nand-controller@ff3b0000 {
 		compatible = "rockchip,px30-nfc";
 		reg = <0x0 0xff3b0000 0x0 0x4000>;
@@ -1967,6 +1979,32 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>,
+					<1 RK_PA2 3 &pcfg_pull_none>,
+					<1 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+		};
+
 		lcdc {
 			lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
 				rockchip,pins =
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v8 4/9 clk: rockchip: rk3036: fix up the sclk_sfc parent error

In reply to Jon Lin

Choose the correct pll

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/clk/rockchip/clk-rk3036.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/rockchip/clk-rk3036.c +2 -1
index 91d56ad45817..1986856d94b2 100644
@@ -121,6 +121,7 @@ PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
 PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
 
 PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll", "usb480m" };
+PNAME(mux_pll_src_dmyapll_dpll_gpll_xin24_p)   = { "dummy_apll", "dpll", "gpll", "xin24m" };
 
 PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
 PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
@@ -340,7 +341,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 4, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_dmyapll_dpll_gpll_xin24_p, 0,
 			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
Signature · 1 line
2.17.1
author
#6 lore raw

PATCH v8 5/9 clk: rockchip: Add support for hclk_sfc on rk3036

In reply to Jon Lin

From: Chris Morgan <[email protected]>

Add support for the bus clock for the serial flash controller on the rk3036. Taken from the Rockchip BSP kernel but not tested on real hardware (as I lack a 3036 based SoC to test).

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 drivers/clk/rockchip/clk-rk3036.c      | 2 +-
 include/dt-bindings/clock/rk3036-cru.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/clk/rockchip/clk-rk3036.c +1 -1
index 1986856d94b2..828af715d92e 100644
@@ -404,7 +404,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
 	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
 	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
-	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(HCLK_SFC, "hclk_sfc", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
 	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
 
 	/* pclk_peri gates */
include/dt-bindings/clock/rk3036-cru.h +1 -0
index 35a5a01f9697..a96a9870ad59 100644
@@ -81,6 +81,7 @@
 #define HCLK_OTG0		449
 #define HCLK_OTG1		450
 #define HCLK_NANDC		453
+#define HCLK_SFC		454
 #define HCLK_SDMMC		456
 #define HCLK_SDIO		457
 #define HCLK_EMMC		459
Signature · 1 line
2.17.1
author
#7 lore raw

PATCH v8 6/9 arm: dts: rockchip: Add SFC to RK3036

From: Chris Morgan <[email protected]>

Add a devicetree entry for the Rockchip SFC for the RK3036 SOC.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 arch/arm/boot/dts/rk3036.dtsi | 42 +++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
arch/arm/boot/dts/rk3036.dtsi +42 -0
index e24230d50a78..06e37be81393 100644
@@ -206,6 +206,17 @@
 		status = "disabled";
 	};
 
+	sfc: spi@10208000 {
+		compatible = "rockchip,sfc";
+		reg = <0x10208000 0x4000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
 	sdmmc: mmc@10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -684,6 +695,37 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_none>,
+					<1 RK_PD1 3 &pcfg_pull_none>,
+					<1 RK_PD2 3 &pcfg_pull_none>,
+					<1 RK_PD3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_none>,
+					<1 RK_PD1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<2 RK_PA2 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs1: sfc-cs1 {
+				rockchip,pins =
+					<2 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<2 RK_PA4 3 &pcfg_pull_none>;
+			};
+		};
+
 		emac {
 			emac_xfer: emac-xfer {
 				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
Signature · 1 line
2.17.1
author
#8 lore raw

PATCH v8 7/9 arm: dts: rockchip: Add SFC to RV1108

In reply to Jon Lin

From: Chris Morgan <[email protected]>

Add a devicetree entry for the Rockchip SFC for the RV1108 SOC.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 arch/arm/boot/dts/rv1108.dtsi | 37 +++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
arch/arm/boot/dts/rv1108.dtsi +37 -0
index 884872ca5207..6d4f289aff53 100644
@@ -536,6 +536,17 @@
 		status = "disabled";
 	};
 
+	sfc: spi@301c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x301c0000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
 	gmac: eth@30200000 {
 		compatible = "rockchip,rv1108-gmac";
 		reg = <0x30200000 0x10000>;
@@ -704,6 +715,32 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>,
+					<2 RK_PA2 3 &pcfg_pull_none>,
+					<2 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+		};
+
 		gmac {
 			rmii_pins: rmii-pins {
 				rockchip,pins =	<1 RK_PC5 2 &pcfg_pull_none>,
Signature · 1 line
2.17.1
author
#9 lore raw

PATCH v8 8/9 arm64: dts: rockchip: Add SFC to RK3308

In reply to Jon Lin

From: Chris Morgan <[email protected]>

Add a devicetree entry for the Rockchip SFC for the RK3308 SOC.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 arch/arm64/boot/dts/rockchip/rk3308.dtsi | 37 ++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
arch/arm64/boot/dts/rockchip/rk3308.dtsi +37 -0
index 0c5fa9801e6f..cb8d96235986 100644
@@ -637,6 +637,17 @@
 		status = "disabled";
 	};
 
+	sfc: spi@ff4c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff4c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
 	cru: clock-controller@ff500000 {
 		compatible = "rockchip,rk3308-cru";
 		reg = <0x0 0xff500000 0x0 0x1000>;
@@ -910,6 +921,32 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>,
+					<3 RK_PA2 3 &pcfg_pull_none>,
+					<3 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<3 RK_PA5 3 &pcfg_pull_none>;
+			};
+		};
+
 		gmac {
 			rmii_pins: rmii-pins {
 				rockchip,pins =
Signature · 1 line
2.17.1
author
#10 lore raw

PATCH v8 9/9 arm64: dts: rockchip: Enable SFC for Odroid Go Advance

In reply to Jon Lin

From: Chris Morgan <[email protected]>

This enables the Rockchip Serial Flash Controller for the Odroid Go Advance. Note that while the attached SPI NOR flash and the controller both support quad read mode, only 2 of the required 4 pins are present. The rx and tx bus width is set to 2 for this reason.

---

Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None

 .../boot/dts/rockchip/rk3326-odroid-go2.dts      | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +16 -0
index 49c97f76df77..f78e11dd8447 100644
@@ -484,6 +484,22 @@
 	status = "okay";
 };
 
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
 &tsadc {
 	status = "okay";
 };
Signature · 1 line
2.17.1