4.14.237-rc1 review

This is the start of the stable review cycle for the 4.14.237 release. There are 49 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.237-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.237-rc1

Liangyan <[email protected]>
tracing: Correct the length check which causes memory corruption

Steven Rostedt (VMware) <[email protected]>
ftrace: Do not blindly read the ip address in ftrace_bug()

Ming Lei <[email protected]>
scsi: core: Only put parent device if host state differs from SHOST_CREATED

Ming Lei <[email protected]>
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING

Ming Lei <[email protected]>
scsi: core: Fix error handling of scsi_host_alloc()

Dai Ngo <[email protected]>
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Anna Schumaker <[email protected]>
NFS: Fix use-after-free in nfs4_init_client()

Paolo Bonzini <[email protected]>
kvm: fix previous commit for 32-bit builds

Leo Yan <[email protected]>
perf session: Correct buffer copying when peeking events

Dan Carpenter <[email protected]>
NFS: Fix a potential NULL dereference in nfs_get_client()

Marco Elver <[email protected]>
perf: Fix data race between pin_count increment/decrement

Dmitry Osipenko <[email protected]>

    regulator: max77620: Use device_set_of_node_from_dev()

Dmitry Baryshkov <[email protected]>
regulator: core: resolve supply for boot-on/always-on regulators

Maciej Żenczykowski <[email protected]>
usb: fix various gadget panics on 10gbps cabling

Maciej Żenczykowski <[email protected]>
usb: fix various gadgets null ptr deref on 10gbps cabling.

Linyu Yuan <[email protected]>
usb: gadget: eem: fix wrong eem header operation

Johan Hovold <[email protected]>
USB: serial: quatech2: fix control-request directions

Alexandre GRIVEAUX <[email protected]>
USB: serial: omninet: add device id for Zyxel Omni 56K Plus

George McCollister <[email protected]>
USB: serial: ftdi_sio: add NovaTech OrionMX product ID

Wesley Cheng <[email protected]>
usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

Mayank Rana <[email protected]>
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

Marian-Cristian Rotariu <[email protected]>
usb: dwc3: ep0: fix NULL pointer exception

Maciej Żenczykowski <[email protected]>
USB: f_ncm: ncm_bitrate (speed) is unsigned

Alexander Kuznetsov <[email protected]>
cgroup1: don't allow '\n' in renaming

Ritesh Harjani <[email protected]>
btrfs: return value from btrfs_mark_extent_written() in case of error

Wenli Looi <[email protected]>
staging: rtl8723bs: Fix uninitialized variables

Paolo Bonzini <[email protected]>
kvm: avoid speculation-based attacks from out-of-range memslot accesses

Desmond Cheong Zhi Xi <[email protected]>
drm: Lock pointer access in drm_master_release()

Desmond Cheong Zhi Xi <[email protected]>
drm: Fix use-after-free read in drm_getunique()

Chris Packham <[email protected]>
i2c: mpc: implement erratum A-004447 workaround

Chris Packham <[email protected]>
i2c: mpc: Make use of i2c_recover_bus()

Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

Jiapeng Chong <[email protected]>
bnx2x: Fix missing error code in bnx2x_iov_init_one()

Tiezhu Yang <[email protected]>
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

Saubhik Mukherjee <[email protected]>
net: appletalk: cops: Fix data race in cops_probe1

Zong Li <[email protected]>
net: macb: ensure the device is available before accessing GEMGXL control registers

Dmitry Bogdanov <[email protected]>
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

Matt Wang <[email protected]>
scsi: vmw_pvscsi: Set correct residual data length

Zheyu Ma <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

Sergey Senozhatsky <[email protected]>
wq: handle VM suspension in stall detection

Shakeel Butt <[email protected]>
cgroup: disable controllers at parse time

Dan Carpenter <[email protected]>
net: mdiobus: get rid of a BUG_ON()

Johannes Berg <[email protected]>
netlink: disable IRQs for netlink_lock_table()

Johannes Berg <[email protected]>
bonding: init notify_work earlier to avoid uninitialized use

Zheyu Ma <[email protected]>
isdn: mISDN: netjet: Fix crash in nj_probe:

Zou Wei <[email protected]>
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

Jeimon <[email protected]>
net/nfc/rawsock.c: fix a permission check bug

Kees Cook <[email protected]>
proc: Track /proc/$pid/attr/ opener mm_struct

-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/mips/lib/mips-atomic.c                       | 12 +--
 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi       |  8 ++
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi       | 16 ++++
 drivers/gpu/drm/drm_auth.c                        |  3 +-
 drivers/gpu/drm/drm_ioctl.c                       |  9 ++-
 drivers/i2c/busses/i2c-mpc.c                      | 95 ++++++++++++++++++++++-
 drivers/isdn/hardware/mISDN/netjet.c              |  1 -
 drivers/net/appletalk/cops.c                      |  4 +-
 drivers/net/bonding/bond_main.c                   |  2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c |  4 +-
 drivers/net/ethernet/cadence/macb_main.c          |  3 +
 drivers/net/ethernet/qlogic/qla3xxx.c             |  2 +-
 drivers/net/phy/mdio_bus.c                        |  3 +-
 drivers/regulator/core.c                          |  6 ++
 drivers/regulator/max77620-regulator.c            |  7 ++
 drivers/scsi/hosts.c                              | 33 ++++----
 drivers/scsi/qla2xxx/qla_target.c                 |  2 +
 drivers/scsi/vmw_pvscsi.c                         |  8 +-
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c |  2 +-
 drivers/usb/dwc3/ep0.c                            |  3 +
 drivers/usb/gadget/config.c                       |  8 ++
 drivers/usb/gadget/function/f_ecm.c               |  2 +-
 drivers/usb/gadget/function/f_eem.c               |  6 +-
 drivers/usb/gadget/function/f_fs.c                |  3 +
 drivers/usb/gadget/function/f_hid.c               |  3 +-
 drivers/usb/gadget/function/f_loopback.c          |  2 +-
 drivers/usb/gadget/function/f_ncm.c               |  2 +-
 drivers/usb/gadget/function/f_printer.c           |  3 +-
 drivers/usb/gadget/function/f_rndis.c             |  2 +-
 drivers/usb/gadget/function/f_serial.c            |  2 +-
 drivers/usb/gadget/function/f_sourcesink.c        |  3 +-
 drivers/usb/gadget/function/f_subset.c            |  2 +-
 drivers/usb/gadget/function/f_tcm.c               |  3 +-
 drivers/usb/serial/ftdi_sio.c                     |  1 +
 drivers/usb/serial/ftdi_sio_ids.h                 |  1 +
 drivers/usb/serial/omninet.c                      |  2 +
 drivers/usb/serial/quatech2.c                     |  6 +-
 drivers/usb/typec/ucsi/ucsi.c                     |  1 +
 fs/btrfs/file.c                                   |  4 +-
 fs/nfs/client.c                                   |  2 +-
 fs/nfs/nfs4client.c                               |  2 +-
 fs/nfs/nfs4proc.c                                 |  8 ++
 fs/proc/base.c                                    |  9 ++-
 include/linux/kvm_host.h                          | 10 ++-
 kernel/cgroup/cgroup-v1.c                         |  4 +
 kernel/cgroup/cgroup.c                            | 13 ++--
 kernel/events/core.c                              |  2 +
 kernel/trace/ftrace.c                             |  8 +-
 kernel/trace/trace.c                              |  2 +-
 kernel/workqueue.c                                | 12 ++-
 net/netlink/af_netlink.c                          |  6 +-
 net/nfc/rawsock.c                                 |  2 +-
 sound/soc/codecs/sti-sas.c                        |  1 +
 tools/perf/util/session.c                         |  1 +
 55 files changed, 291 insertions(+), 74 deletions(-)

From: Kees Cook <[email protected]>

commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.

Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") tried to make sure that there could not be a confusion between the opener of a /proc/$pid/attr/ file and the writer. It used struct cred to make sure the privileges didn't change. However, there were existing cases where a more privileged thread was passing the opened fd to a differently privileged thread (during container setup). Instead, use mm_struct to track whether the opener and writer are still the same process. (This is what several other proc files already do, though for different reasons.)

---
 fs/proc/base.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -2528,6 +2528,11 @@ out:
 }
 
 #ifdef CONFIG_SECURITY
+static int proc_pid_attr_open(struct inode *inode, struct file *file)
+{
+	return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS);
+}
+
 static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
 				  size_t count, loff_t *ppos)
 {

@@ -2558,7 +2563,7 @@ static ssize_t proc_pid_attr_write(struc
 	struct task_struct *task = get_proc_task(inode);
 
 	/* A task may only write when it was the opener. */
-	if (file->f_cred != current_real_cred())
+	if (file->private_data != current->mm)
 		return -EPERM;
 
 	length = -ESRCH;

@@ -2601,9 +2606,11 @@ out_no_task:
 }
 
 static const struct file_operations proc_pid_attr_operations = {
+	.open		= proc_pid_attr_open,
 	.read		= proc_pid_attr_read,
 	.write		= proc_pid_attr_write,
 	.llseek		= generic_file_llseek,
+	.release	= mem_release,
 };
 
 static const struct pid_entry attr_dir_stuff[] = {

From: Jeimon <[email protected]>

[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]

The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().

---
 net/nfc/rawsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 57a07ab80d92..bdc72737fe24 100644
@@ -345,7 +345,7 @@ static int rawsock_create(struct net *net, struct socket *sock,
 		return -ESOCKTNOSUPPORT;
 
 	if (sock->type == SOCK_RAW) {
-		if (!capable(CAP_NET_RAW))
+		if (!ns_capable(net->user_ns, CAP_NET_RAW))
 			return -EPERM;
 		sock->ops = &rawsock_raw_ops;
 	} else {

2.30.2

From: Zou Wei <[email protected]>

[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

---
 sound/soc/codecs/sti-sas.c | 1 +
 1 file changed, 1 insertion(+)

index 62c618765224..730dd453a744 100644
@@ -407,6 +407,7 @@ static const struct of_device_id sti_sas_dev_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, sti_sas_dev_match);
 
 static int sti_sas_driver_probe(struct platform_device *pdev)
 {

2.30.2

From: Zheyu Ma <[email protected]>

[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]

'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[ 3.355112 ] Modules linked in:
[ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.356552 ] RIP: 0010:free_irq+0x100/0x480
[ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400

[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18

4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8

[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

---
 drivers/isdn/hardware/mISDN/netjet.c | 1 -
 1 file changed, 1 deletion(-)

index 6a6d848bd18e..79f9925da76c 100644
@@ -1114,7 +1114,6 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		card->typ = NETJET_S_TJ300;
 
 	card->base = pci_resource_start(pdev, 0);
-	card->irq = pdev->irq;
 	pci_set_drvdata(pdev, card);
 	err = setup_instance(card);
 	if (err)

2.30.2

From: Johannes Berg <[email protected]>

[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]

If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail, then we call kobject_put() on the slave->kobj. This in turn calls the release function slave_kobj_release() which will always try to cancel_delayed_work_sync(&slave->notify_work), which shouldn't be done on an uninitialized work struct.

Always initialize the work struct earlier to avoid problems here.

Syzbot bisected this down to a completely pointless commit, some fault injection may have been at work here that caused the alloc failure in the first place, which may interact badly with bisect.

---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 1250983616ef..340e7bf6463e 100644
@@ -1295,6 +1295,7 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
 
 	slave->bond = bond;
 	slave->dev = slave_dev;
+	INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
 
 	if (bond_kobj_init(slave))
 		return NULL;

@@ -1307,7 +1308,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
 			return NULL;
 		}
 	}
-	INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
 
 	return slave;
 }

2.30.2

From: Johannes Berg <[email protected]>

[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]

Syzbot reports that in mac80211 we have a potential deadlock between our "local->stop_queue_reasons_lock" (spinlock) and netlink's nl_table_lock (rwlock). This is because there's at least one situation in which we might try to send a netlink message with this spinlock held while it is also possible to take the spinlock from a hardirq context, resulting in the following deadlock scenario reported by lockdep:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

This seems valid, we can take the queue_stop_reason_lock in any kind of context ("CPU0"), and call ieee80211_report_ack_skb() with the spinlock held and IRQs disabled ("CPU1") in some code path (ieee80211_do_stop() via ieee80211_free_txskb()).

Short of disallowing netlink use in scenarios like these (which would be rather complex in mac80211's case due to the deep callchain), it seems the only fix for this is to disable IRQs while nl_table_lock is held to avoid hitting this scenario, this disallows the "CPU0" portion of the reported deadlock.

Note that the writer side (netlink_table_grab()) already disables IRQs for this lock.

Unfortunately though, this seems like a huge hammer, and maybe the whole netlink table locking should be reworked.

---
 net/netlink/af_netlink.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

index 3e4e07559272..140bec3568ec 100644
@@ -429,11 +429,13 @@ void netlink_table_ungrab(void)
 static inline void
 netlink_lock_table(void)
 {
+	unsigned long flags;
+
 	/* read_lock() synchronizes us to netlink_table_grab */
 
-	read_lock(&nl_table_lock);
+	read_lock_irqsave(&nl_table_lock, flags);
 	atomic_inc(&nl_table_users);
-	read_unlock(&nl_table_lock);
+	read_unlock_irqrestore(&nl_table_lock, flags);
 }
 
 static inline void

2.30.2

From: Dan Carpenter <[email protected]>

[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]

We spotted a bug recently during a review where a driver was unregistering a bus that wasn't registered, which would trigger this BUG_ON(). Let's handle that situation more gracefully, and just print a warning and return.

---
 drivers/net/phy/mdio_bus.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index c545fb1f82bd..5fc7b6c1a442 100644
@@ -412,7 +412,8 @@ void mdiobus_unregister(struct mii_bus *bus)
 	struct mdio_device *mdiodev;
 	int i;
 
-	BUG_ON(bus->state != MDIOBUS_REGISTERED);
+	if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED))
+		return;
 	bus->state = MDIOBUS_UNREGISTERED;
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {

2.30.2

From: Shakeel Butt <[email protected]>

[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]

This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix too early usage of static_branch_disable()"). The commit 6041186a3258 ("init: initialize jump labels before command line option parsing") has moved the jump_label_init() before parse_args() which has made the commit a3e72739b7a7 unnecessary. On the other hand there are consequences of disabling the controllers later as there are subsystems doing the controller checks for different decisions. One such incident is reported [1] regarding the memory controller and its impact on memory reclaim code.

[1] https://lore.kernel.org/linux-mm/[email protected]

---
 kernel/cgroup/cgroup.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

index ada060e628ce..99783685f3d9 100644
@@ -5219,8 +5219,6 @@ int __init cgroup_init_early(void)
 	return 0;
 }
 
-static u16 cgroup_disable_mask __initdata;
-
 /**
  * cgroup_init - cgroup initialization
  *

@@ -5278,12 +5276,8 @@ int __init cgroup_init(void)
 		 * disabled flag and cftype registration needs kmalloc,
 		 * both of which aren't available during early_init.
 		 */
-		if (cgroup_disable_mask & (1 << ssid)) {
-			static_branch_disable(cgroup_subsys_enabled_key[ssid]);
-			printk(KERN_INFO "Disabling %s control group subsystem\n",
-			       ss->name);
+		if (!cgroup_ssid_enabled(ssid))
 			continue;
-		}
 
 		if (cgroup1_ssid_disabled(ssid))
 			printk(KERN_INFO "Disabling %s control group subsystem in v1 mounts\n",

@@ -5642,7 +5636,10 @@ static int __init cgroup_disable(char *str)
 			if (strcmp(token, ss->name) &&
 			    strcmp(token, ss->legacy_name))
 				continue;
-			cgroup_disable_mask |= 1 << i;
+
+			static_branch_disable(cgroup_subsys_enabled_key[i]);
+			pr_info("Disabling %s control group subsystem\n",
+				ss->name);
 		}
 	}
 	return 1;

2.30.2

From: Sergey Senozhatsky <[email protected]>

[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]

If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then once this VCPU resumes it will see the new jiffies value, while it may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this VCPU and updates all the watchdogs via pvclock_touch_watchdogs(). There is a small chance of misreported WQ stalls in the meantime, because new jiffies is time_after() old 'ts + thresh'.

wq_watchdog_timer_fn()

{
	for_each_pool(pool, pi) {
		if (time_after(jiffies, ts + thresh)) {
			pr_emerg("BUG: workqueue lockup - pool");
		}
	}
}

Save jiffies at the beginning of this function and use that value for stall detection. If VM gets suspended then we continue using "old" jiffies value and old WQ touch timestamps. If IRQ at some point restarts the stall detection cycle (pvclock_touch_watchdogs()) then old jiffies will always be before new 'ts + thresh'.

---
 kernel/workqueue.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

index bc32ed4a4cf3..58e7eefe4dbf 100644
@@ -49,6 +49,7 @@
 #include <linux/moduleparam.h>
 #include <linux/uaccess.h>
 #include <linux/nmi.h>
+#include <linux/kvm_para.h>
 
 #include "workqueue_internal.h"
 

@@ -5465,6 +5466,7 @@ static void wq_watchdog_timer_fn(unsigned long data)
 {
 	unsigned long thresh = READ_ONCE(wq_watchdog_thresh) * HZ;
 	bool lockup_detected = false;
+	unsigned long now = jiffies;
 	struct worker_pool *pool;
 	int pi;
 

@@ -5479,6 +5481,12 @@ static void wq_watchdog_timer_fn(unsigned long data)
 		if (list_empty(&pool->worklist))
 			continue;
 
+		/*
+		 * If a virtual machine is stopped by the host it can look to
+		 * the watchdog like a stall.
+		 */
+		kvm_check_and_clear_guest_paused();
+
 		/* get the latest of pool and touched timestamps */
 		pool_ts = READ_ONCE(pool->watchdog_ts);
 		touched = READ_ONCE(wq_watchdog_touched);

@@ -5497,12 +5505,12 @@ static void wq_watchdog_timer_fn(unsigned long data)
 		}
 
 		/* did we stall? */
-		if (time_after(jiffies, ts + thresh)) {
+		if (time_after(now, ts + thresh)) {
 			lockup_detected = true;
 			pr_emerg("BUG: workqueue lockup - pool");
 			pr_cont_pool_info(pool);
 			pr_cont(" stuck for %us!\n",
-				jiffies_to_msecs(jiffies - pool_ts) / 1000);
+				jiffies_to_msecs(now - pool_ts) / 1000);
 		}
 	}
 

2.30.2

From: Zheyu Ma <[email protected]>

[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]

When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

The KASAN's log reveals it:

[    3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[    3.238748 ] 2 locks held by swapper/0/1:
[    3.239151 ]  #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[    3.240026 ]  #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[    3.240873 ] Modules linked in:
[    3.241187 ] irq event stamp: 460854
[    3.241541 ] hardirqs last  enabled at (460853): [<ffffffff843051bf>]

_raw_spin_unlock_irqrestore+0x4f/0x70
[ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110

[    3.242245 ] Preemption disabled at:
[    3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[    3.242245 ] Kernel panic - not syncing: scheduling while atomic
[    3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[    3.242245 ] Call Trace:
[    3.242245 ]  dump_stack+0xba/0xf5
[    3.242245 ]  ? ql3xxx_probe+0x1f0/0xea0
[    3.242245 ]  panic+0x15a/0x3f2
[    3.242245 ]  ? vprintk+0x76/0x150
[    3.242245 ]  ? ql3xxx_probe+0x2aa/0xea0
[    3.242245 ]  __schedule_bug+0xae/0xe0
[    3.242245 ]  __schedule+0x72e/0xa00
[    3.242245 ]  schedule+0x43/0xf0
[    3.242245 ]  schedule_timeout+0x28b/0x500
[    3.242245 ]  ? del_timer_sync+0xf0/0xf0
[    3.242245 ]  ? msleep+0x2f/0x70
[    3.242245 ]  msleep+0x59/0x70
[    3.242245 ]  ql3xxx_probe+0x307/0xea0
[    3.242245 ]  ? _raw_spin_unlock_irqrestore+0x3a/0x70
[    3.242245 ]  ? pci_device_remove+0x110/0x110
[    3.242245 ]  local_pci_probe+0x45/0xa0
[    3.242245 ]  pci_device_probe+0x12b/0x1d0
[    3.242245 ]  really_probe+0x2a9/0x610
[    3.242245 ]  driver_probe_device+0x90/0x1d0
[    3.242245 ]  ? mutex_lock_nested+0x1b/0x20
[    3.242245 ]  device_driver_attach+0x68/0x70
[    3.242245 ]  __driver_attach+0x124/0x1b0
[    3.242245 ]  ? device_driver_attach+0x70/0x70
[    3.242245 ]  bus_for_each_dev+0xbb/0x110
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  driver_attach+0x27/0x30
[    3.242245 ]  bus_add_driver+0x1eb/0x2a0
[    3.242245 ]  driver_register+0xa9/0x180
[    3.242245 ]  __pci_register_driver+0x82/0x90
[    3.242245 ]  ? yellowfin_init+0x25/0x25
[    3.242245 ]  ql3xxx_driver_init+0x23/0x25
[    3.242245 ]  do_one_initcall+0x7f/0x3d0
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.242245 ]  kernel_init_freeable+0x2aa/0x301
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  kernel_init+0x18/0x190
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ret_from_fork+0x1f/0x30
[    3.242245 ] Dumping ftrace buffer:
[    3.242245 ]    (ftrace buffer empty)
[    3.242245 ] Kernel Offset: disabled
[    3.242245 ] Rebooting in 1 seconds.

---
 drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index cc53ee26bd3e..a8bb061e1a8a 100644
@@ -115,7 +115,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev,
 		value = readl(&port_regs->CommonRegs.semaphoreReg);
 		if ((value & (sem_mask >> 16)) == sem_bits)
 			return 0;
-		ssleep(1);
+		mdelay(1000);
 	} while (--seconds);
 	return -1;
 }

2.30.2

From: Matt Wang <[email protected]>

[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]

Some commands (such as INQUIRY) may return less data than the initiator requested. To avoid conducting useless information, set the right residual count to make upper layer aware of this.

Before (INQUIRY PAGE 0xB0 with 128B buffer):

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 128 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

After:

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

[mkp: clarified description]

---
 drivers/scsi/vmw_pvscsi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

index 64eb8ffb2ddf..2c707b5c7b0b 100644
@@ -574,7 +574,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
 		case BTSTAT_SUCCESS:
 		case BTSTAT_LINKED_COMMAND_COMPLETED:
 		case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG:
-			/* If everything went fine, let's move on..  */
+			/*
+			 * Commands like INQUIRY may transfer less data than
+			 * requested by the initiator via bufflen. Set residual
+			 * count to make upper layer aware of the actual amount
+			 * of data returned.
+			 */
+			scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
 			cmd->result = (DID_OK << 16);
 			break;
 

2.30.2

From: Dmitry Bogdanov <[email protected]>

[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]

Target de-configuration panics at high CPU load because TPGT and WWPN can be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset complete (phase1). Due to high CPU load that HBA reset can be delayed for some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has already completed and thus tgt.tgt_ops is subsequently cleared. However, tgt.tgt_ops is needed to process incoming traffic and therefore this will cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]

Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]

Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]

Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]

qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and qlt_stop_phase2() functions to make WWPN removal wait for phase1 completion.

---
 drivers/scsi/qla2xxx/qla_target.c | 2 ++
 1 file changed, 2 insertions(+)

index 21011c5fddeb..bd8f9b03386a 100644
@@ -1517,10 +1517,12 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
 		return;
 	}
 
+	mutex_lock(&tgt->ha->optrom_mutex);
 	mutex_lock(&vha->vha_tgt.tgt_mutex);
 	tgt->tgt_stop = 0;
 	tgt->tgt_stopped = 1;
 	mutex_unlock(&vha->vha_tgt.tgt_mutex);
+	mutex_unlock(&tgt->ha->optrom_mutex);
 
 	ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished\n",
 	    tgt);

2.30.2

From: Zong Li <[email protected]>

[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]

If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers.

We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device.

Changed in v2:
- Use netif_running instead of its own flag

---
 drivers/net/ethernet/cadence/macb_main.c | 3 +++
 1 file changed, 3 insertions(+)

index 4d2a996ba446..b07ea8a26c20 100644
@@ -2330,6 +2330,9 @@ static struct net_device_stats *gem_get_stats(struct macb *bp)
 	struct gem_stats *hwstat = &bp->hw_stats.gem;
 	struct net_device_stats *nstat = &bp->dev->stats;
 
+	if (!netif_running(bp->dev))
+		return nstat;
+
 	gem_update_stats(bp);
 
 	nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +

2.30.2

From: Saubhik Mukherjee <[email protected]>

[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]

In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq().

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/net/appletalk/cops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 486e1e6997fc..dde0cda3f696 100644
@@ -324,6 +324,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
 			break;
 	}
 
+	dev->base_addr = ioaddr;
+
 	/* Reserve any actual interrupt. */
 	if (dev->irq) {
 		retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev);

@@ -331,8 +333,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
 			goto err_out;
 	}
 
-	dev->base_addr = ioaddr;
-
         lp = netdev_priv(dev);
         spin_lock_init(&lp->lock);
 

2.30.2

From: Tiezhu Yang <[email protected]>

[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]

When update the latest mainline kernel with the following three configs, the kernel hangs during startup:

(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y

When update the latest mainline kernel with the above two configs (1) and (2), the kernel starts normally, but it still hangs when execute the following command:

echo "function_graph" > /sys/kernel/debug/tracing/current_tracer

Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences with function_graph tracer at the first glance.

I use ejtag to find out the epc address is related with preempt_enable() in the file arch/mips/lib/mips-atomic.c, because function tracing can trace the preempt_{enable,disable} calls that are traced, replace them with preempt_{enable,disable}_notrace to prevent function tracing from going into an infinite loop, and then it can fix the kernel hang issue.

By the way, it seems that this commit is a complement and improvement of commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing is enabled").

---
 arch/mips/lib/mips-atomic.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

index 5530070e0d05..57497a26e79c 100644
@@ -37,7 +37,7 @@
  */
 notrace void arch_local_irq_disable(void)
 {
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"

@@ -53,7 +53,7 @@ notrace void arch_local_irq_disable(void)
 	: /* no inputs */
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 }
 EXPORT_SYMBOL(arch_local_irq_disable);
 

@@ -61,7 +61,7 @@ notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;
 
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"

@@ -78,7 +78,7 @@ notrace unsigned long arch_local_irq_save(void)
 	: /* no inputs */
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 
 	return flags;
 }

@@ -88,7 +88,7 @@ notrace void arch_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-	preempt_disable();
+	preempt_disable_notrace();
 
 	__asm__ __volatile__(
 	"	.set	push						\n"

@@ -106,7 +106,7 @@ notrace void arch_local_irq_restore(unsigned long flags)
 	: "0" (flags)
 	: "memory");
 
-	preempt_enable();
+	preempt_enable_notrace();
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
 

2.30.2

From: Jiapeng Chong <[email protected]>

[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 1977e0c552df..e4d1aaf838a4 100644
@@ -1242,8 +1242,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 		goto failed;
 
 	/* SR-IOV capability was enabled but there are no VFs*/
-	if (iov->total == 0)
+	if (iov->total == 0) {
+		err = -EINVAL;
 		goto failed;
+	}
 
 	iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param);
 

2.30.2

From: Chris Packham <[email protected]>

[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]

The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing).

---
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

index 51e975d7631a..8921f17fca42 100644
@@ -389,7 +389,23 @@
 	};
 
 /include/ "qoriq-i2c-0.dtsi"
+	i2c@118000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@118100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-i2c-1.dtsi"
+	i2c@119000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@119100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"

2.30.2

From: Chris Packham <[email protected]>

[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]

The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L.

---
 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

index af12ead88c5f..404f570ebe23 100644
@@ -122,7 +122,15 @@
 	};
 
 /include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		fsl,i2c-erratum-a004447;
+	};
+
 /include/ "pq3-duart-0.dtsi"
 /include/ "pq3-espi-0.dtsi"
 	spi0: spi@7000 {

2.30.2

From: Chris Packham <[email protected]>

[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]

Move the existing calls of mpc_i2c_fixup() to a recovery function registered via bus_recovery_info. This makes it more obvious that recovery is supported and allows for a future where recovery is triggered by the i2c core.

---
 drivers/i2c/busses/i2c-mpc.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

index 96caf378b1dc..d94df068c073 100644
@@ -581,7 +581,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 				writeb(status & ~CSR_MAL,
 				       i2c->base + MPC_I2C_SR);
-				mpc_i2c_fixup(i2c);
+				i2c_recover_bus(&i2c->adap);
 			}
 			return -EIO;
 		}

@@ -617,7 +617,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
 				writeb(status & ~CSR_MAL,
 				       i2c->base + MPC_I2C_SR);
-				mpc_i2c_fixup(i2c);
+				i2c_recover_bus(&i2c->adap);
 			}
 			return -EIO;
 		}

@@ -632,6 +632,15 @@ static u32 mpc_functionality(struct i2c_adapter *adap)
 	  | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
 }
 
+static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
+{
+	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+	mpc_i2c_fixup(i2c);
+
+	return 0;
+}
+
 static const struct i2c_algorithm mpc_algo = {
 	.master_xfer = mpc_xfer,
 	.functionality = mpc_functionality,

@@ -643,6 +652,10 @@ static struct i2c_adapter mpc_ops = {
 	.timeout = HZ,
 };
 
+static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
+	.recover_bus = fsl_i2c_bus_recovery,
+};
+
 static const struct of_device_id mpc_i2c_of_match[];
 static int fsl_i2c_probe(struct platform_device *op)
 {

@@ -735,6 +748,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &op->dev;
 	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+	i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
 
 	result = i2c_add_adapter(&i2c->adap);
 	if (result < 0)

2.30.2

From: Chris Packham <[email protected]>

[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]

The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q.

---
 drivers/i2c/busses/i2c-mpc.c | 79 +++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

index d94df068c073..7db5554d2b4e 100644
@@ -23,6 +23,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/fsl_devices.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>

@@ -49,6 +50,7 @@
 #define CCR_MTX  0x10
 #define CCR_TXAK 0x08
 #define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
 
 #define CSR_MCF  0x80
 #define CSR_MAAS 0x40

@@ -70,6 +72,7 @@ struct mpc_i2c {
 	u8 fdr, dfsrr;
 #endif
 	struct clk *clk_per;
+	bool has_errata_A004447;
 };
 
 struct mpc_i2c_divider {

@@ -178,6 +181,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	return 0;
 }
 
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+	void __iomem *addr = i2c->base + MPC_I2C_SR;
+	u8 val;
+
+	return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1.  Set up the frequency divider and sampling rate.
+ * 2.  I2CCR - a0h
+ * 3.  Poll for I2CSR[MBB] to get set.
+ * 4.  If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ *     step 5. If MAL is not set, then go to step 13.
+ * 5.  I2CCR - 00h
+ * 6.  I2CCR - 22h
+ * 7.  I2CCR - a2h
+ * 8.  Poll for I2CSR[MBB] to get set.
+ * 9.  Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+	int ret;
+	u32 val;
+
+	writeccr(i2c, CCR_MEN | CCR_MSTA);
+	ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+	if (ret) {
+		dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+		return;
+	}
+
+	val = readb(i2c->base + MPC_I2C_SR);
+
+	if (val & CSR_MAL) {
+		writeccr(i2c, 0x00);
+		writeccr(i2c, CCR_MSTA | CCR_RSVD);
+		writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+			return;
+		}
+		val = readb(i2c->base + MPC_I2C_DR);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+			return;
+		}
+		writeccr(i2c, CCR_MEN | CCR_RSVD);
+	} else {
+		val = readb(i2c->base + MPC_I2C_DR);
+		ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+		if (ret) {
+			dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+			return;
+		}
+		writeccr(i2c, CCR_MEN);
+	}
+}
+
 #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},

@@ -636,7 +708,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
 {
 	struct mpc_i2c *i2c = i2c_get_adapdata(adap);
 
-	mpc_i2c_fixup(i2c);
+	if (i2c->has_errata_A004447)
+		mpc_i2c_fixup_A004447(i2c);
+	else
+		mpc_i2c_fixup(i2c);
 
 	return 0;
 }

@@ -740,6 +815,8 @@ static int fsl_i2c_probe(struct platform_device *op)
 	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 
 	platform_set_drvdata(op, i2c);
+	if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+		i2c->has_errata_A004447 = true;
 
 	i2c->adap = mpc_ops;
 	of_address_to_resource(op->dev.of_node, 0, &res);

2.30.2

From: Desmond Cheong Zhi Xi <[email protected]>

commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.

There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex.

An example can be seen in the crash report of the use-after-free error found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked.

To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test.

---
 drivers/gpu/drm/drm_ioctl.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -112,17 +112,18 @@ int drm_getunique(struct drm_device *dev
 		  struct drm_file *file_priv)
 {
 	struct drm_unique *u = data;
-	struct drm_master *master = file_priv->master;
+	struct drm_master *master;
 
-	mutex_lock(&master->dev->master_mutex);
+	mutex_lock(&dev->master_mutex);
+	master = file_priv->master;
 	if (u->unique_len >= master->unique_len) {
 		if (copy_to_user(u->unique, master->unique, master->unique_len)) {
-			mutex_unlock(&master->dev->master_mutex);
+			mutex_unlock(&dev->master_mutex);
 			return -EFAULT;
 		}
 	}
 	u->unique_len = master->unique_len;
-	mutex_unlock(&master->dev->master_mutex);
+	mutex_unlock(&dev->master_mutex);
 
 	return 0;
 }

From: Desmond Cheong Zhi Xi <[email protected]>

commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.

This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'

The 'file_priv->master' field should be protected by the mutex lock to '&dev->master_mutex'. This is because other processes can concurrently modify this field and free the current 'file_priv->master' pointer. This could result in a use-after-free error when 'master' is dereferenced in subsequent function calls to 'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.

An example of a scenario that would produce this error can be seen from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the Syzbot report, another process concurrently acquired the device's master mutex in 'drm_setmaster_ioctl()', then overwrote 'fpriv->master' in 'drm_new_set_master()'. The old value of 'fpriv->master' was subsequently freed before the mutex was unlocked.

---
 drivers/gpu/drm/drm_auth.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -244,9 +244,10 @@ int drm_master_open(struct drm_file *fil
 void drm_master_release(struct drm_file *file_priv)
 {
 	struct drm_device *dev = file_priv->minor->dev;
-	struct drm_master *master = file_priv->master;
+	struct drm_master *master;
 
 	mutex_lock(&dev->master_mutex);
+	master = file_priv->master;
 	if (file_priv->magic)
 		idr_remove(&file_priv->master->magic_map, file_priv->magic);
 

From: Paolo Bonzini <[email protected]>

commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.

KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula:

      hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE

It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid.

__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first.

Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.

Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses.

---
 include/linux/kvm_host.h |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -963,7 +963,15 @@ __gfn_to_memslot(struct kvm_memslots *sl
 static inline unsigned long
 __gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn)
 {
-	return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
+	/*
+	 * The index was checked originally in search_memslots.  To avoid
+	 * that a malicious guest builds a Spectre gadget out of e.g. page
+	 * table walks, do not let the processor speculate loads outside
+	 * the guest's registered memslots.
+	 */
+	unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
+						  slot->npages);
+	return slot->userspace_addr + offset * PAGE_SIZE;
 }
 
 static inline int memslot_id(struct kvm *kvm, gfn_t gfn)

From: Wenli Looi <[email protected]>

commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.

The sinfo.pertid and sinfo.generation variables are not initialized and it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

[ snip ]

[  457.271004] Backtrace:
[  457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

---
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2432,7 +2432,7 @@ void rtw_cfg80211_indicate_sta_assoc(str
 	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
 
 	{
-		struct station_info sinfo;
+		struct station_info sinfo = {};
 		u8 ie_offset;
 		if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ)
 			ie_offset = _ASOCREQ_IE_OFFSET_;

From: Ritesh Harjani <[email protected]>

commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.

We always return 0 even in case of an error in btrfs_mark_extent_written(). Fix it to return proper error value in case of a failure. All callers handle it.

---
 fs/btrfs/file.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1100,7 +1100,7 @@ int btrfs_mark_extent_written(struct btr
 	int del_nr = 0;
 	int del_slot = 0;
 	int recow;
-	int ret;
+	int ret = 0;
 	u64 ino = btrfs_ino(inode);
 
 	path = btrfs_alloc_path();

@@ -1320,7 +1320,7 @@ again:
 	}
 out:
 	btrfs_free_path(path);
-	return 0;
+	return ret;
 }
 
 /*

From: Alexander Kuznetsov <[email protected]>

commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.

cgroup_mkdir() have restriction on newline usage in names:

$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument

But in cgroup1_rename() such check is missed. This allows us to make /proc/<pid>/cgroup unparsable:

$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/

---
 kernel/cgroup/cgroup-v1.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -861,6 +861,10 @@ static int cgroup1_rename(struct kernfs_
 	struct cgroup *cgrp = kn->priv;
 	int ret;
 
+	/* do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable */
+	if (strchr(new_name_str, '\n'))
+		return -EINVAL;
+
 	if (kernfs_type(kn) != KERNFS_DIR)
 		return -ENOTDIR;
 	if (kn->parent != new_parent)

From: Maciej Żenczykowski <[email protected]>

commit 3370139745853f7826895293e8ac3aec1430508e upstream.

[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

---
 drivers/usb/gadget/function/f_ncm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -589,7 +589,7 @@ static void ncm_do_notify(struct f_ncm *
 		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
 		data[1] = data[0];
 
-		DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+		DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
 		ncm->notify_state = NCM_NOTIFY_CONNECT;
 		break;
 	}

From: Marian-Cristian Rotariu <[email protected]>

commit d00889080ab60051627dab1d85831cd9db750e2a upstream.

There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong index back to the caller.

In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

---
 drivers/usb/dwc3/ep0.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -302,6 +302,9 @@ static struct dwc3_ep *dwc3_wIndex_to_de
 		epnum |= 1;
 
 	dep = dwc->eps[epnum];
+	if (dep == NULL)
+		return NULL;
+
 	if (dep->flags & DWC3_EP_ENABLED)
 		return dep;
 

From: Mayank Rana <[email protected]>

commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.

If ucsi_init() fails for some reason (e.g. ucsi_register_port() fails or general communication failure to the PPM), particularly at any point after the GET_CAPABILITY command had been issued, this results in unwinding the initialization and returning an error. However the ucsi structure's ucsi_capability member retains its current value, including likely a non-zero num_connectors. And because ucsi_init() itself is done in a workqueue a UCSI interface driver will be unaware that it failed and may think the ucsi_register() call was completely successful. Later, if ucsi_unregister() is called, due to this stale ucsi->cap value it would try to access the items in the ucsi->connector array which might not be in a proper state or not even allocated at all and results in NULL or invalid pointer dereference.

Fix this by clearing the ucsi->cap value to 0 during the error path of ucsi_init() in order to prevent a later ucsi_unregister() from entering the connector cleanup loop.

---
 drivers/usb/typec/ucsi/ucsi.c |    1 +
 1 file changed, 1 insertion(+)

@@ -724,6 +724,7 @@ err_unregister:
 	}
 
 err_reset:
+	memset(&ucsi->cap, 0, sizeof(ucsi->cap));
 	ucsi_reset_ppm(ucsi);
 err:
 	mutex_unlock(&ucsi->ppm_lock);

From: Wesley Cheng <[email protected]>

commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.

During unbind, ffs_func_eps_disable() will be executed, resulting in completion callbacks for any pending USB requests. When using AIO, irrespective of the completion status, io_data work is queued to io_completion_wq to evaluate and handle the completed requests. Since work runs asynchronously to the unbind() routine, there can be a scenario where the work runs after the USB gadget has been fully removed, resulting in accessing of a resource which has been already freed. (i.e. usb_ep_free_request() accessing the USB ep structure)

Explicitly drain the io_completion_wq, instead of relying on the destroy_workqueue() (in ffs_data_put()) to make sure no pending completion work items are running.

---
 drivers/usb/gadget/function/f_fs.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -3459,6 +3459,9 @@ static void ffs_func_unbind(struct usb_c
 		ffs->func = NULL;
 	}
 
+	/* Drain any pending AIO completions */
+	drain_workqueue(ffs->io_completion_wq);
+
 	if (!--opts->refcnt)
 		functionfs_unbind(ffs);
 

From: George McCollister <[email protected]>

commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.

Add PID for the NovaTech OrionMX so it can be automatically detected.

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

@@ -606,6 +606,7 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },

@@ -581,6 +581,7 @@
 #define FTDI_NT_ORIONLXM_PID		0x7c90	/* OrionLXm Substation Automation Platform */
 #define FTDI_NT_ORIONLX_PLUS_PID	0x7c91	/* OrionLX+ Substation Automation Platform */
 #define FTDI_NT_ORION_IO_PID		0x7c92	/* Orion I/O */
+#define FTDI_NT_ORIONMX_PID		0x7c93	/* OrionMX */
 
 /*
  * Synapse Wireless product ids (FTDI_VID)

From: Alexandre GRIVEAUX <[email protected]>

commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.

Add device id for Zyxel Omni 56K Plus modem, this modem include:

USB chip:
NetChip
NET2888

Main chip:
901041A
F721501APGF

Another modem using the same chips is the Zyxel Omni 56K DUO/NEO, could be added with the right USB ID.

---
 drivers/usb/serial/omninet.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -29,6 +29,7 @@
 
 #define ZYXEL_VENDOR_ID		0x0586
 #define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
 /* This one seems to be a re-branded ZyXEL device */
 #define BT_IGNITIONPRO_ID	0x2000
 

@@ -43,6 +44,7 @@ static int omninet_port_remove(struct us
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };

From: Johan Hovold <[email protected]>

commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Fix the three requests which erroneously used usb_rcvctrlpipe().

---
 drivers/usb/serial/quatech2.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -420,7 +420,7 @@ static void qt2_close(struct usb_serial_
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 1,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 

@@ -430,7 +430,7 @@ static void qt2_close(struct usb_serial_
 
 	/* flush the port receive buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 0,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 

@@ -696,7 +696,7 @@ static int qt2_attach(struct usb_serial
 	int status;
 
 	/* power on unit */
-	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 0xc2, 0x40, 0x8000, 0, NULL, 0,
 				 QT2_USB_TIMEOUT);
 	if (status < 0) {

From: Linyu Yuan <[email protected]>

commit 305f670846a31a261462577dd0b967c4fa796871 upstream.

when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header, or not it will read network data and check it as header.

---
 drivers/usb/gadget/function/f_eem.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -502,7 +502,7 @@ static int eem_unwrap(struct gether *por
 			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (unlikely(!skb2)) {
 				DBG(cdev, "unable to unframe EEM packet\n");
-				continue;
+				goto next;
 			}
 			skb_trim(skb2, len - ETH_FCS_LEN);
 

@@ -513,7 +513,7 @@ static int eem_unwrap(struct gether *por
 			if (unlikely(!skb3)) {
 				DBG(cdev, "unable to realign EEM packet\n");
 				dev_kfree_skb_any(skb2);
-				continue;
+				goto next;
 			}
 			dev_kfree_skb_any(skb2);
 			skb_queue_tail(list, skb3);

From: Maciej Żenczykowski <[email protected]>

commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.

This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps.

---
 drivers/usb/gadget/function/f_ecm.c        |    2 +-
 drivers/usb/gadget/function/f_eem.c        |    2 +-
 drivers/usb/gadget/function/f_hid.c        |    3 ++-
 drivers/usb/gadget/function/f_loopback.c   |    2 +-
 drivers/usb/gadget/function/f_printer.c    |    3 ++-
 drivers/usb/gadget/function/f_rndis.c      |    2 +-
 drivers/usb/gadget/function/f_serial.c     |    2 +-
 drivers/usb/gadget/function/f_sourcesink.c |    3 ++-
 drivers/usb/gadget/function/f_subset.c     |    2 +-
 drivers/usb/gadget/function/f_tcm.c        |    3 ++-
 10 files changed, 14 insertions(+), 10 deletions(-)

@@ -793,7 +793,7 @@ ecm_bind(struct usb_configuration *c, st
 		fs_ecm_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
-			ecm_ss_function, NULL);
+			ecm_ss_function, ecm_ss_function);
 	if (status)
 		goto fail;
 

@@ -309,7 +309,7 @@ static int eem_bind(struct usb_configura
 	eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
-			eem_ss_function, NULL);
+			eem_ss_function, eem_ss_function);
 	if (status)
 		goto fail;
 

@@ -812,7 +812,8 @@ static int hidg_bind(struct usb_configur
 		hidg_fs_out_ep_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, hidg_fs_descriptors,
-			hidg_hs_descriptors, hidg_ss_descriptors, NULL);
+			hidg_hs_descriptors, hidg_ss_descriptors,
+			hidg_ss_descriptors);
 	if (status)
 		goto fail;
 

@@ -211,7 +211,7 @@ autoconf_fail:
 	ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
-			ss_loopback_descs, NULL);
+			ss_loopback_descs, ss_loopback_descs);
 	if (ret)
 		return ret;
 

@@ -1067,7 +1067,8 @@ autoconf_fail:
 	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function, NULL);
+			hs_printer_function, ss_printer_function,
+			ss_printer_function);
 	if (ret)
 		return ret;
 

@@ -793,7 +793,7 @@ rndis_bind(struct usb_configuration *c,
 	ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
-			eth_ss_function, NULL);
+			eth_ss_function, eth_ss_function);
 	if (status)
 		goto fail;
 

@@ -236,7 +236,7 @@ static int gser_bind(struct usb_configur
 	gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
-			gser_ss_function, NULL);
+			gser_ss_function, gser_ss_function);
 	if (status)
 		goto fail;
 	dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",

@@ -435,7 +435,8 @@ no_iso:
 	ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, fs_source_sink_descs,
-			hs_source_sink_descs, ss_source_sink_descs, NULL);
+			hs_source_sink_descs, ss_source_sink_descs,
+			ss_source_sink_descs);
 	if (ret)
 		return ret;
 

@@ -362,7 +362,7 @@ geth_bind(struct usb_configuration *c, s
 		fs_subset_out_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
-			ss_eth_function, NULL);
+			ss_eth_function, ss_eth_function);
 	if (status)
 		goto fail;
 

@@ -2071,7 +2071,8 @@ static int tcm_bind(struct usb_configura
 	uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
 
 	ret = usb_assign_descriptors(f, uasp_fs_function_desc,
-			uasp_hs_function_desc, uasp_ss_function_desc, NULL);
+			uasp_hs_function_desc, uasp_ss_function_desc,
+			uasp_ss_function_desc);
 	if (ret)
 		goto ep_fail;
 

From: Maciej Żenczykowski <[email protected]>

commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.

usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).

The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough).

However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it)

The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided.

Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way).

---
 drivers/usb/gadget/config.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -168,6 +168,14 @@ int usb_assign_descriptors(struct usb_fu
 {
 	struct usb_gadget *g = f->config->cdev->gadget;
 
+	/* super-speed-plus descriptor falls back to super-speed one,
+	 * if such a descriptor was provided, thus avoiding a NULL
+	 * pointer dereference if a 5gbps capable gadget is used with
+	 * a 10gbps capable config (device port + cable + host port)
+	 */
+	if (!ssp)
+		ssp = ss;
+
 	if (fs) {
 		f->fs_descriptors = usb_copy_descriptors(fs);
 		if (!f->fs_descriptors)

From: Dmitry Baryshkov <[email protected]>

commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.

For the boot-on/always-on regulators the set_machine_constrainst() is called before resolving rdev->supply. Thus the code would try to enable rdev before enabling supplying regulator. Enforce resolving supply regulator before enabling rdev.

---
 drivers/regulator/core.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -1081,6 +1081,12 @@ static int set_machine_constraints(struc
 	 * and we have control then make sure it is enabled.
 	 */
 	if (rdev->constraints->always_on || rdev->constraints->boot_on) {
+		/* If we want to enable this regulator, make sure that we know
+		 * the supplying regulator.
+		 */
+		if (rdev->supply_name && !rdev->supply)
+			return -EPROBE_DEFER;
+
 		ret = _regulator_do_enable(rdev);
 		if (ret < 0 && ret != -EINVAL) {
 			rdev_err(rdev, "failed to enable\n");

From: Dmitry Osipenko <[email protected]>

commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream.

The MAX77620 driver fails to re-probe on deferred probe because driver core tries to claim resources that are already claimed by the PINCTRL device. Use device_set_of_node_from_dev() helper which marks OF node as reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC device on the re-probe.

---
 drivers/regulator/max77620-regulator.c |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -792,6 +792,13 @@ static int max77620_regulator_probe(stru
 	config.dev = dev;
 	config.driver_data = pmic;
 
+	/*
+	 * Set of_node_reuse flag to prevent driver core from attempting to
+	 * claim any pinmux resources already claimed by the parent device.
+	 * Otherwise PMIC driver will fail to re-probe.
+	 */
+	device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
 	for (id = 0; id < MAX77620_NUM_REGS; id++) {
 		struct regulator_dev *rdev;
 		struct regulator_desc *rdesc;

From: Marco Elver <[email protected]>

commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream.

KCSAN reports a data race between increment and decrement of pin_count:

write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1:
find_get_context kernel/events/core.c:4617
__do_sys_perf_event_open kernel/events/core.c:12097 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0:
perf_unpin_context kernel/events/core.c:1525 [inline]
__do_sys_perf_event_open kernel/events/core.c:12328 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...

Because neither read-modify-write here is atomic, this can lead to one of the operations being lost, resulting in an inconsistent pin_count. Fix it by adding the missing locking in the CPU-event case.

---
 kernel/events/core.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -3918,7 +3918,9 @@ find_get_context(struct pmu *pmu, struct
 		cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
 		ctx = &cpuctx->ctx;
 		get_ctx(ctx);
+		raw_spin_lock_irqsave(&ctx->lock, flags);
 		++ctx->pin_count;
+		raw_spin_unlock_irqrestore(&ctx->lock, flags);
 
 		return ctx;
 	}

From: Dan Carpenter <[email protected]>

[ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ]

None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected.

---
 fs/nfs/client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 9e7d49fac4e3..1f74893b2b0c 100644
@@ -406,7 +406,7 @@ struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_init)
 
 	if (cl_init->hostname == NULL) {
 		WARN_ON(1);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	/* see if the client already exists */

2.30.2

From: Leo Yan <[email protected]>

[ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ]

When peeking an event, it has a short path and a long path. The short path uses the session pointer "one_mmap_addr" to directly fetch the event; and the long path needs to read out the event header and the following event data from file and fill into the buffer pointer passed through the argument "buf".

The issue is in the long path that it copies the event header and event data into the same destination address which pointer "buf", this means the event header is overwritten. We are just lucky to run into the short path in most cases, so we don't hit the issue in the long path.

This patch adds the offset "hdr_sz" to the pointer "buf" when copying the event data, so that it can reserve the event header which can be used properly by its caller.

---
 tools/perf/util/session.c | 1 +
 1 file changed, 1 insertion(+)

index decd5d147e81..735dc862c7f8 100644
@@ -1475,6 +1475,7 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
 	if (event->header.size < hdr_sz || event->header.size > buf_sz)
 		return -1;
 
+	buf += hdr_sz;
 	rest = event->header.size - hdr_sz;
 
 	if (readn(fd, buf, rest) != (ssize_t)rest)

2.30.2

From: Paolo Bonzini <[email protected]>

commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream.

array_index_nospec does not work for uint64_t on 32-bit builds. However, the size of a memory slot must be less than 20 bits wide on those system, since the memory slot must fit in the user address space. So just store it in an unsigned long.

---
 include/linux/kvm_host.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -969,8 +969,8 @@ __gfn_to_hva_memslot(struct kvm_memory_s
 	 * table walks, do not let the processor speculate loads outside
 	 * the guest's registered memslots.
 	 */
-	unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
-						  slot->npages);
+	unsigned long offset = gfn - slot->base_gfn;
+	offset = array_index_nospec(offset, slot->npages);
 	return slot->userspace_addr + offset * PAGE_SIZE;
 }
 

From: Anna Schumaker <[email protected]>

commit 476bdb04c501fc64bf3b8464ffddefc8dbe01577 upstream.

KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server.

Olga was able to hit this with kernels starting somewhere between 5.7 and 5.10, but I traced the patch that introduced the clear_bit() call to 4.13. So something must have changed in the refcounting of the clp pointer to make this call to nfs_put_client() the very last one.

---
 fs/nfs/nfs4client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -417,8 +417,8 @@ struct nfs_client *nfs4_init_client(stru
 		 */
 		nfs_mark_client_ready(clp, -EPERM);
 	}
-	nfs_put_client(clp);
 	clear_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags);
+	nfs_put_client(clp);
 	return old;
 
 error:

From: Dai Ngo <[email protected]>

commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream.

Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if the retry fails. This causes problem for subsequent setattr requests for v4 server that does not have idmapping configured.

This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skips the retry, since the kernel isn't involved in encoding the ACEs, and return -EINVAL.

Steps to reproduce the problem:

 # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
 # touch /tmp/mnt/file1
 # chown 99 /tmp/mnt/file1
 # nfs4_setfacl -a A::[email protected]:wrtncy /tmp/mnt/file1
 Failed setxattr operation: Invalid argument
 # chown 99 /tmp/mnt/file1
 chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument
 # umount /tmp/mnt
 # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
 # chown 99 /tmp/mnt/file1
 #

v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry
in nfs4_proc_set_acl.

---
 fs/nfs/nfs4proc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -5294,6 +5294,14 @@ static int nfs4_proc_set_acl(struct inod
 	do {
 		err = __nfs4_proc_set_acl(inode, buf, buflen);
 		trace_nfs4_set_acl(inode, err);
+		if (err == -NFS4ERR_BADOWNER || err == -NFS4ERR_BADNAME) {
+			/*
+			 * no need to retry since the kernel
+			 * isn't involved in encoding the ACEs.
+			 */
+			err = -EINVAL;
+			break;
+		}
 		err = nfs4_handle_exception(NFS_SERVER(inode), err,
 				&exception);
 	} while (exception.retry);

From: Ming Lei <[email protected]>

commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.

After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name().

Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well.

---
 drivers/scsi/hosts.c |   23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

@@ -404,8 +404,10 @@ struct Scsi_Host *scsi_host_alloc(struct
 	mutex_init(&shost->scan_mutex);
 
 	index = ida_simple_get(&host_index_ida, 0, 0, GFP_KERNEL);
-	if (index < 0)
-		goto fail_kfree;
+	if (index < 0) {
+		kfree(shost);
+		return NULL;
+	}
 	shost->host_no = index;
 
 	shost->dma_channel = 0xff;

@@ -493,7 +495,7 @@ struct Scsi_Host *scsi_host_alloc(struct
 		shost_printk(KERN_WARNING, shost,
 			"error handler thread failed to spawn, error = %ld\n",
 			PTR_ERR(shost->ehandler));
-		goto fail_index_remove;
+		goto fail;
 	}
 
 	shost->tmf_work_q = alloc_workqueue("scsi_tmf_%d",

@@ -502,17 +504,18 @@ struct Scsi_Host *scsi_host_alloc(struct
 	if (!shost->tmf_work_q) {
 		shost_printk(KERN_WARNING, shost,
 			     "failed to create tmf workq\n");
-		goto fail_kthread;
+		goto fail;
 	}
 	scsi_proc_hostdir_add(shost->hostt);
 	return shost;
+ fail:
+	/*
+	 * Host state is still SHOST_CREATED and that is enough to release
+	 * ->shost_gendev. scsi_host_dev_release() will free
+	 * dev_name(&shost->shost_dev).
+	 */
+	put_device(&shost->shost_gendev);
 
- fail_kthread:
-	kthread_stop(shost->ehandler);
- fail_index_remove:
-	ida_simple_remove(&host_index_ida, shost->host_no);
- fail_kfree:
-	kfree(shost);
 	return NULL;
 }
 EXPORT_SYMBOL(scsi_host_alloc);

From: Ming Lei <[email protected]>

commit 11714026c02d613c30a149c3f4c4a15047744529 upstream.

scsi_host_dev_release() only frees dev_name when host state is SHOST_CREATED. After host state has changed to SHOST_RUNNING, scsi_host_dev_release() no longer cleans up.

Fix this by doing a put_device(&shost->shost_dev) in the failure path when host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put on this reference.

---
 drivers/scsi/hosts.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -256,12 +256,11 @@ int scsi_add_host_with_dma(struct Scsi_H
 
 	device_enable_async_suspend(&shost->shost_dev);
 
+	get_device(&shost->shost_gendev);
 	error = device_add(&shost->shost_dev);
 	if (error)
 		goto out_del_gendev;
 
-	get_device(&shost->shost_gendev);
-
 	if (shost->transportt->host_size) {
 		shost->shost_data = kzalloc(shost->transportt->host_size,
 					 GFP_KERNEL);

@@ -298,6 +297,11 @@ int scsi_add_host_with_dma(struct Scsi_H
  out_del_dev:
 	device_del(&shost->shost_dev);
  out_del_gendev:
+	/*
+	 * Host state is SHOST_RUNNING so we have to explicitly release
+	 * ->shost_dev.
+	 */
+	put_device(&shost->shost_dev);
 	device_del(&shost->shost_gendev);
  out_disable_runtime_pm:
 	device_disable_async_suspend(&shost->shost_gendev);

From: Ming Lei <[email protected]>

commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.

get_device(shost->shost_gendev.parent) is called after host state has switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the parent device if host state is still SHOST_CREATED.

---
 drivers/scsi/hosts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -355,7 +355,7 @@ static void scsi_host_dev_release(struct
 
 	ida_simple_remove(&host_index_ida, shost->host_no);
 
-	if (parent)
+	if (shost->shost_state != SHOST_CREATED)
 		put_device(parent);
 	kfree(shost);
 }

From: Steven Rostedt (VMware) <[email protected]>

commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.

It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address.

Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location.

---
 kernel/trace/ftrace.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -2042,12 +2042,18 @@ static int ftrace_hash_ipmodify_update(s
 
 static void print_ip_ins(const char *fmt, const unsigned char *p)
 {
+	char ins[MCOUNT_INSN_SIZE];
 	int i;
 
+	if (probe_kernel_read(ins, p, MCOUNT_INSN_SIZE)) {
+		printk(KERN_CONT "%s[FAULT] %px\n", fmt, p);
+		return;
+	}
+
 	printk(KERN_CONT "%s", fmt);
 
 	for (i = 0; i < MCOUNT_INSN_SIZE; i++)
-		printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]);
+		printk(KERN_CONT "%s%02x", i ? ":" : "", ins[i]);
 }
 
 enum ftrace_bug_type ftrace_bug_type;

From: Liangyan <[email protected]>

commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream.

We've suffered from severe kernel crashes due to memory corruption on our production environment, like,

Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS:  00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009]  anon_vma_clone+0x5d/0x170
[1640542.567417]  __split_vma+0x91/0x1a0
[1640542.567777]  do_munmap+0x2c6/0x320
[1640542.568128]  vm_munmap+0x54/0x70
[1640542.569990]  __x64_sys_munmap+0x22/0x30
[1640542.572005]  do_syscall_64+0x5b/0x1b0
[1640542.573724]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27

James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows:

[   86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[   86.780806]  no_context+0xdf/0x3c0
[   86.784327]  __do_page_fault+0x252/0x470
[   86.788367]  do_page_fault+0x32/0x140
[   86.792145]  page_fault+0x1e/0x30
[   86.795576]  strncpy_from_unsafe+0x66/0xb0
[   86.799789]  fetch_memory_string+0x25/0x40
[   86.804002]  fetch_deref_string+0x51/0x60
[   86.808134]  kprobe_trace_func+0x32d/0x3a0
[   86.812347]  kprobe_dispatcher+0x45/0x50
[   86.816385]  kprobe_ftrace_handler+0x90/0xf0
[   86.820779]  ftrace_ops_assist_func+0xa1/0x140
[   86.825340]  0xffffffffc00750bf
[   86.828603]  do_sys_open+0x5/0x1f0
[   86.832124]  do_syscall_64+0x5b/0x1b0
[   86.835900]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow.

---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2274,7 +2274,7 @@ trace_event_buffer_lock_reserve(struct r
 	    (entry = this_cpu_read(trace_buffered_event))) {
 		/* Try to use the per cpu buffer first */
 		val = this_cpu_inc_return(trace_buffered_event_cnt);
-		if ((len < (PAGE_SIZE - sizeof(*entry))) && val == 1) {
+		if ((len < (PAGE_SIZE - sizeof(*entry) - sizeof(entry->array[0]))) && val == 1) {
 			trace_event_setup(entry, type, flags, pc);
 			entry->array[0] = len;
 			return entry;

All tests passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.237-rc1-g2e03cf25d5d0
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

Tested on x86 for 4.14.237-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.237-rc1
Commit: cd5358beb13452c589c392a4d3b91a7015a8c5cc
Compiler: gcc version 7.3.0 (GCC)

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8836
passed: 8836
failed: 0
timeout: 0
--------------------------------------------------------------------

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.14.237-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.14.y
* git commit: 2e03cf25d5d0197592eed1d477a1dca0ab898e16
* git describe: v4.14.236-50-g2e03cf25d5d0
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.236-50-g2e03cf25d5d0

## No regressions (compared to v4.14.236-40-gcd5358beb134)

## No fixes (compared to v4.14.236-40-gcd5358beb134)

## Test result summary
total: 60640, pass: 47894, fail: 1240, skip: 10366, xfail: 1140,

## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 24 total, 24 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 14 total, 14 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Build results:

	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 406 pass: 406 fail: 0

Guenter