drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
Subsystems (3)
PATCH RESEND 1/3 drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format.
---
Hi,
I added the reviewed-by tag from Laurent Pinchart for the RESEND, hope that is ok.
https://lore.kernel.org/dri-devel/YNChySKddg%[email protected]/
drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1137,6 +1137,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
Signature · 1 line
2.25.1
PATCH RESEND 2/3 drm/panel: Add connector_type for some EDT displays
The connector_type for following two EDT displays is missing:
- EDT ETM0430G0DH6
- EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1940,6 +1940,7 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct drm_display_mode edt_et057090dhu_mode = {
@@ -2004,6 +2005,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = { }, .bus_format = MEDIA_BUS_FMT_RGB666_1X18, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, };static const struct display_timing evervision_vgg804821_timing = {
Signature · 1 line
2.25.1
PATCH RESEND 3/3 drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6
In reply to Stefan RiedmuellerAdd corresponding bus_format and bus_flags for the EDT ETM0430G0DH6 display.
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1940,6 +1940,8 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, .connector_type = DRM_MODE_CONNECTOR_DPI, };
Signature · 1 line
2.25.1
Hi Stefan.
Quoted 10 lines · Stefan Riedmueller
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default
bus_format.Signed-off-by Stefan Riedmueller <[email protected]>Reviewed-by Laurent Pinchart <[email protected]>---
Hi,
I added the reviewed-by tag from Laurent Pinchart for the RESEND, hope that is ok.
https://lore.kernel.org/dri-devel/YNChySKddg%[email protected]/
Thanks, thats a help so I did not have to add it.
All three patches applied to drm-misc-next now.
Sam