drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
Subsystems (3)
PATCH 1/3 drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format.
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
Signature · 1 line
2.25.1
PATCH 2/3 drm/panel: Add connector_type for some EDT displays
The connector_type for following two EDT displays is missing:
- EDT ETM0430G0DH6
- EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1900,6 +1900,7 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct drm_display_mode edt_et057090dhu_mode = {
@@ -1964,6 +1965,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = { }, .bus_format = MEDIA_BUS_FMT_RGB666_1X18, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, };static const struct display_timing evervision_vgg804821_timing = {
Signature · 1 line
2.25.1
PATCH 3/3 drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6
In reply to Stefan RiedmuellerAdd corresponding bus_format and bus_flags for the EDT ETM0430G0DH6 display.
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
@@ -1900,6 +1900,8 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, .connector_type = DRM_MODE_CONNECTOR_DPI, };
Signature · 1 line
2.25.1
Hi,
gentle ping for this small series.
Regards,
Stefan
Quoted 22 lines · Stefan Riedmueller
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default
bus_format.Signed-off-by Stefan Riedmueller <[email protected]>--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)drivers/gpu/drm/panel/panel-simple.c +2
-0@@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
Hi,
another gentle ping.
Also adding Laurent Pinchart to CC.
Regards,
Stefan
Quoted 30 lines · Stefan Riedmüller
Hi,
gentle ping for this small series.
Regards,
StefanQuoted 22 lines · Stefan Riedmueller
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default
bus_format.Signed-off-by Stefan Riedmueller <[email protected]>--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)drivers/gpu/drm/panel/panel-simple.c +2
-0@@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
Hi Stefan,
Quoted 5 lines · Stefan Riedmüller
Hi,
another gentle ping.
Also adding Laurent Pinchart to CC.
Can I ask you to resend the whole lot. I have resurfaced after an off-line period and deleted all pending mails.
I could probarly hunt down the mails somewhere but resend is easier on my end.
Sam
Hi Sam,
Quoted 7 lines · Sam Ravnborg
Hi Stefan,
Quoted 4 lines · Stefan Riedmüller
Hi,
another gentle ping.
Quoted 7 lines
Quoted 1 line
Also adding Laurent Pinchart to CC.
Can I ask you to resend the whole lot. I have resurfaced after an off-line period and deleted all pending mails.
I could probarly hunt down the mails somewhere but resend is easier on my end.
Sure, no problem, I'll send it out ASAP.
Stefan
Quoted 2 lines
Sam
Laurent Pinchart
Reviewed-byHi Stefan,
Thank you for the patch.
Quoted 3 lines · Stefan Riedmüller
Hi,
another gentle ping.
Sorry for the delay, I have way too little bandwidth these days :-S
Quoted 8 lines
Also adding Laurent Pinchart to CC.
Quoted 5 lines · Stefan Riedmüller
Quoted 4 lines · Stefan Riedmueller
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default
bus_format.Signed-off-by Stefan Riedmueller <[email protected]>
It will be interesting to add support for the 6bpp mode at some point (I assume through a custom DT property that reports the state of the panel's SEL68 pin, as it should be strapped in most cases).
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
--- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)drivers/gpu/drm/panel/panel-simple.c +2
-0@@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
Signature · 3 lines
Regards, Laurent Pinchart