Skip to contentSkip to conversation

block/ssh: add support for sha256 host key fingerprints

PATCH Applied Daniel P. Berrangé 4 participants 4 messages Jun 22, 2021 – Jun 30, 2021 Block layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 block/ssh: add support for sha256 host key fingerprints

Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.

---

Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "known_hosts" file

qemu-img: Could not open 'TEST_IMG': no host key was found in known_hosts

it seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.

At least the sha256 verification step I added to 207 does pass though.

 block/ssh.c                |  3 +++
 qapi/block-core.json       |  3 ++-
 tests/qemu-iotests/207     | 54 ++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/207.out | 25 ++++++++++++++++++
 4 files changed, 84 insertions(+), 1 deletion(-)
block/ssh.c +3 -0
index b51a031620..d008caf059 100644
@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp)
         } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1) {
             return check_host_key_hash(s, hkc->u.hash.hash,
                                        SSH_PUBLICKEY_HASH_SHA1, errp);
+        } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256) {
+            return check_host_key_hash(s, hkc->u.hash.hash,
+                                       SSH_PUBLICKEY_HASH_SHA256, errp);
         }
         g_assert_not_reached();
         break;
qapi/block-core.json +2 -1
index 2ea294129e..4247dc46a5 100644
@@ -3186,11 +3186,12 @@
 #
 # @md5: The given hash is an md5 hash
 # @sha1: The given hash is an sha1 hash
+# @sha256: The given hash is an sha256 hash
 #
 # Since: 2.12
 ##
 { 'enum': 'SshHostKeyCheckHashType',
-  'data': [ 'md5', 'sha1' ] }
+  'data': [ 'md5', 'sha1', 'sha256' ] }
 
 ##
 # @SshHostKeyHash:
tests/qemu-iotests/207 +54 -0

102 lines not on this page · raw message

tests/qemu-iotests/207.out +25 -0
index 1239d9d648..aeb8569d77 100644
@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes)
 
 === Test host-key-check options ===
 
+--- no host key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -25,6 +27,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- known_hosts key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -34,6 +38,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit md5 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -49,6 +55,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- explicit sha1 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -64,6 +72,23 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit sha256 key checking --
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
+{"return": {}}
+Job failed: remote host key does not match host_key_check 'wrong'
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+image: TEST_IMG
+file format: IMGFMT
+virtual size: 4 MiB (4194304 bytes)
+
 === Invalid path and user ===
 
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
Signature · 1 line
2.31.1
Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Daniel P. Berrangé

Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.

Patch looks sensible:

Would you mind taking a look at nbdkit-ssh-plugin? This is arguably more important (for Red Hat) since we no longer use the SSH driver in qemu for V2V and switched to using nbdkit some time ago. The nbdkit-ssh-plugin appears to only support SHA1 from a cursory look.

Rich.

Quoted 231 lines

Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "known_hosts" file

qemu-img: Could not open 'TEST_IMG': no host key was found in known_hosts

it seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.

At least the sha256 verification step I added to 207 does pass though.

 block/ssh.c                |  3 +++
 qapi/block-core.json       |  3 ++-
 tests/qemu-iotests/207     | 54 ++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/207.out | 25 ++++++++++++++++++
 4 files changed, 84 insertions(+), 1 deletion(-)
block/ssh.c +3 -0
index b51a031620..d008caf059 100644
@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp)
         } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1) {
             return check_host_key_hash(s, hkc->u.hash.hash,
                                        SSH_PUBLICKEY_HASH_SHA1, errp);
+        } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256) {
+            return check_host_key_hash(s, hkc->u.hash.hash,
+                                       SSH_PUBLICKEY_HASH_SHA256, errp);
         }
         g_assert_not_reached();
         break;
qapi/block-core.json +2 -1
index 2ea294129e..4247dc46a5 100644
@@ -3186,11 +3186,12 @@
 #
 # @md5: The given hash is an md5 hash
 # @sha1: The given hash is an sha1 hash
+# @sha256: The given hash is an sha256 hash
 #
 # Since: 2.12
 ##
 { 'enum': 'SshHostKeyCheckHashType',
-  'data': [ 'md5', 'sha1' ] }
+  'data': [ 'md5', 'sha1', 'sha256' ] }
 
 ##
 # @SshHostKeyHash:
tests/qemu-iotests/207 +54 -0
index f9f3fd7131..0f5c4bc8a0 100755
@@ -73,6 +73,9 @@ with iotests.FilePath('t.img') as disk_path, \
     iotests.log("=== Test host-key-check options ===")
     iotests.log("")
 
+    iotests.log("--- no host key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -90,6 +93,9 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- known_hosts key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -115,6 +121,7 @@ with iotests.FilePath('t.img') as disk_path, \
     # Mappings of base64 representations to digests
     md5_keys = {}
     sha1_keys = {}
+    sha256_keys = {}
 
     for key in keys:
         md5_keys[key] = subprocess.check_output(
@@ -125,6 +132,10 @@ with iotests.FilePath('t.img') as disk_path, \
             'echo %s | base64 -d | sha1sum -b | cut -d" " -f1' % key,
             shell=True).rstrip().decode('ascii')
 
+        sha256_keys[key] = subprocess.check_output(
+            'echo %s | base64 -d | sha256sum -b | cut -d" " -f1' % key,
+            shell=True).rstrip().decode('ascii')
+
     vm.launch()
 
     # Find correct key first
@@ -150,6 +161,9 @@ with iotests.FilePath('t.img') as disk_path, \
         vm.shutdown()
         iotests.notrun('Did not find a key that fits 127.0.0.1')
 
+    iotests.log("--- explicit md5 key checking --")
+    iotests.log("")
+
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
                               'path': disk_path,
@@ -164,6 +178,7 @@ with iotests.FilePath('t.img') as disk_path, \
                               }
                           },
                           'size': 2097152 })
+
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
                               'path': disk_path,
@@ -182,6 +197,9 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- explicit sha1 key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -215,6 +233,42 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- explicit sha256 key checking --")
+    iotests.log("")
+
+    vm.launch()
+    blockdev_create(vm, { 'driver': 'ssh',
+                          'location': {
+                              'path': disk_path,
+                              'server': {
+                                  'host': '127.0.0.1',
+                                  'port': '22'
+                              },
+                              'host-key-check': {
+                                  'mode': 'hash',
+                                  'type': 'sha256',
+                                  'hash': 'wrong',
+                              }
+                          },
+                          'size': 2097152 })
+    blockdev_create(vm, { 'driver': 'ssh',
+                          'location': {
+                              'path': disk_path,
+                              'server': {
+                                  'host': '127.0.0.1',
+                                  'port': '22'
+                              },
+                              'host-key-check': {
+                                  'mode': 'hash',
+                                  'type': 'sha256',
+                                  'hash': sha256_keys[matching_key],
+                              }
+                          },
+                          'size': 4194304 })
+    vm.shutdown()
+
+    iotests.img_info_log(remote_path)
+
     #
     # Invalid path and user
     #
tests/qemu-iotests/207.out +25 -0
index 1239d9d648..aeb8569d77 100644
@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes)
 
 === Test host-key-check options ===
 
+--- no host key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -25,6 +27,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- known_hosts key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -34,6 +38,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit md5 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -49,6 +55,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- explicit sha1 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -64,6 +72,23 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit sha256 key checking --
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
+{"return": {}}
+Job failed: remote host key does not match host_key_check 'wrong'
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+image: TEST_IMG
+file format: IMGFMT
+virtual size: 4 MiB (4194304 bytes)
+
 === Invalid path and user ===
 
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
Signature · 1 line
2.31.1
Signature · 5 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-top is 'top' for virtual machines.  Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
http://people.redhat.com/~rjones/virt-top
Reviewed-by on v1 1/1
#2 lore raw
In reply to Daniel P. Berrangé
Quoted 12 lines · Daniel P. Berrangé

Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.

---

Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "known_hosts" file

Quoted 8 lines

qemu-img: Could not open 'TEST_IMG': no host key was found in known_hosts

it seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.

At least the sha256 verification step I added to 207 does pass though.

+Pino

Quoted 11 lines
 block/ssh.c                |  3 +++
 qapi/block-core.json       |  3 ++-
 tests/qemu-iotests/207     | 54 ++++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/207.out | 25 ++++++++++++++++++
 4 files changed, 84 insertions(+), 1 deletion(-)
block/ssh.c +0 -0
index b51a031620..d008caf059 100644

block/ssh.c static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp) · line 447

Quoted 6 lines
block/ssh.c +3 -0
@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp)
         } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1) {
             return check_host_key_hash(s, hkc->u.hash.hash,
                                        SSH_PUBLICKEY_HASH_SHA1, errp);
+        } else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256) {
+            return check_host_key_hash(s, hkc->u.hash.hash,
+                                       SSH_PUBLICKEY_HASH_SHA256, errp);

Easier to read as a switch() :)

Quoted 200 lines
block/ssh.c +0 -0
         }
         g_assert_not_reached();
         break;
qapi/block-core.json +2 -1
index 2ea294129e..4247dc46a5 100644
@@ -3186,11 +3186,12 @@
 #
 # @md5: The given hash is an md5 hash
 # @sha1: The given hash is an sha1 hash
+# @sha256: The given hash is an sha256 hash
 #
 # Since: 2.12
 ##
 { 'enum': 'SshHostKeyCheckHashType',
-  'data': [ 'md5', 'sha1' ] }
+  'data': [ 'md5', 'sha1', 'sha256' ] }
 
 ##
 # @SshHostKeyHash:
tests/qemu-iotests/207 +54 -0
index f9f3fd7131..0f5c4bc8a0 100755
@@ -73,6 +73,9 @@ with iotests.FilePath('t.img') as disk_path, \
     iotests.log("=== Test host-key-check options ===")
     iotests.log("")
 
+    iotests.log("--- no host key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -90,6 +93,9 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- known_hosts key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -115,6 +121,7 @@ with iotests.FilePath('t.img') as disk_path, \
     # Mappings of base64 representations to digests
     md5_keys = {}
     sha1_keys = {}
+    sha256_keys = {}
 
     for key in keys:
         md5_keys[key] = subprocess.check_output(
@@ -125,6 +132,10 @@ with iotests.FilePath('t.img') as disk_path, \
             'echo %s | base64 -d | sha1sum -b | cut -d" " -f1' % key,
             shell=True).rstrip().decode('ascii')
 
+        sha256_keys[key] = subprocess.check_output(
+            'echo %s | base64 -d | sha256sum -b | cut -d" " -f1' % key,
+            shell=True).rstrip().decode('ascii')
+
     vm.launch()
 
     # Find correct key first
@@ -150,6 +161,9 @@ with iotests.FilePath('t.img') as disk_path, \
         vm.shutdown()
         iotests.notrun('Did not find a key that fits 127.0.0.1')
 
+    iotests.log("--- explicit md5 key checking --")
+    iotests.log("")
+
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
                               'path': disk_path,
@@ -164,6 +178,7 @@ with iotests.FilePath('t.img') as disk_path, \
                               }
                           },
                           'size': 2097152 })
+
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
                               'path': disk_path,
@@ -182,6 +197,9 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- explicit sha1 key checking --")
+    iotests.log("")
+
     vm.launch()
     blockdev_create(vm, { 'driver': 'ssh',
                           'location': {
@@ -215,6 +233,42 @@ with iotests.FilePath('t.img') as disk_path, \
 
     iotests.img_info_log(remote_path)
 
+    iotests.log("--- explicit sha256 key checking --")
+    iotests.log("")
+
+    vm.launch()
+    blockdev_create(vm, { 'driver': 'ssh',
+                          'location': {
+                              'path': disk_path,
+                              'server': {
+                                  'host': '127.0.0.1',
+                                  'port': '22'
+                              },
+                              'host-key-check': {
+                                  'mode': 'hash',
+                                  'type': 'sha256',
+                                  'hash': 'wrong',
+                              }
+                          },
+                          'size': 2097152 })
+    blockdev_create(vm, { 'driver': 'ssh',
+                          'location': {
+                              'path': disk_path,
+                              'server': {
+                                  'host': '127.0.0.1',
+                                  'port': '22'
+                              },
+                              'host-key-check': {
+                                  'mode': 'hash',
+                                  'type': 'sha256',
+                                  'hash': sha256_keys[matching_key],
+                              }
+                          },
+                          'size': 4194304 })
+    vm.shutdown()
+
+    iotests.img_info_log(remote_path)
+
     #
     # Invalid path and user
     #
tests/qemu-iotests/207.out +25 -0
index 1239d9d648..aeb8569d77 100644
@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes)
 
 === Test host-key-check options ===
 
+--- no host key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -25,6 +27,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- known_hosts key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
 {"return": {}}
 {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -34,6 +38,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit md5 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -49,6 +55,8 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 8 MiB (8388608 bytes)
 
+--- explicit sha1 key checking --
+
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
 {"return": {}}
 Job failed: remote host key does not match host_key_check 'wrong'
@@ -64,6 +72,23 @@ image: TEST_IMG
 file format: IMGFMT
 virtual size: 4 MiB (4194304 bytes)
 
+--- explicit sha256 key checking --
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}}
+{"return": {}}
+Job failed: remote host key does not match host_key_check 'wrong'
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+
+image: TEST_IMG
+file format: IMGFMT
+virtual size: 4 MiB (4194304 bytes)
+
 === Invalid path and user ===
 
 {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
Applied
#3 lore raw
In reply to Daniel P. Berrangé

Am 22.06.2021 um 13:51 hat Daniel P. Berrangé geschrieben:

Quoted 7 lines

Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.

Thanks, applied to the block branch.

Quoted 11 lines

Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "known_hosts" file

qemu-img: Could not open 'TEST_IMG': no host key was found in known_hosts

it seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.

At least the sha256 verification step I added to 207 does pass though.

It passes for me when I make sure to add 127.0.0.1 to known_hosts first. My ~/.ssh/config also has these lines, probably from a previous run, which may or may not be necessary:

Host 127.0.0.1
HostKeyAlgorithms ssh-rsa

Kevin