block/ssh: add support for sha256 host key fingerprints
PATCH 1/1 block/ssh: add support for sha256 host key fingerprints
Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.
---
Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "known_hosts" file
qemu-img: Could not open 'TEST_IMG': no host key was found in known_hosts
it seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.
At least the sha256 verification step I added to 207 does pass though.
block/ssh.c | 3 +++ qapi/block-core.json | 3 ++- tests/qemu-iotests/207 | 54 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/207.out | 25 ++++++++++++++++++ 4 files changed, 84 insertions(+), 1 deletion(-)
block/ssh.c +3 -0
@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp) }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1 ) {return check_host_key_hash (s, hkc->u.hash.hash,SSH_PUBLICKEY_HASH_SHA1 , errp); + }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256 ) { +return check_host_key_hash (s, hkc->u.hash.hash, +SSH_PUBLICKEY_HASH_SHA256 , errp); }g_assert_not_reached ();break ;
qapi/block-core.json +2 -1
@@ -3186,11 +3186,12 @@ # # @md5: The given hash is an md5 hash # @sha1: The given hash is an sha1 hash +# @sha256: The given hash is an sha256 hash # # Since: 2.12 ## { 'enum': 'SshHostKeyCheckHashType', - 'data': [ 'md5', 'sha1' ] } + 'data': [ 'md5', 'sha1', 'sha256' ] } ## # @SshHostKeyHash:
tests/qemu-iotests/207 +54 -0
102 lines not on this page · raw message
tests/qemu-iotests/207.out +25 -0
@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes) === Test host-key-check options === +--- no host key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -25,6 +27,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- known_hosts key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}
@@ -34,6 +38,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit md5 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'
@@ -49,6 +55,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- explicit sha1 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'
@@ -64,6 +72,23 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit sha256 key checking -- + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} +{"return": {}} +Job failed: remote host key does not match host_key_check 'wrong' +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} +{"return": {}} +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +image: TEST_IMG +file format: IMGFMT +virtual size: 4 MiB (4194304 bytes) + === Invalid path and user === {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
Signature · 1 line
2.31.1
Quoted 7 lines · Daniel P. Berrangé
Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.
Signed-off-by Daniel P. Berrangé <[email protected]>
Patch looks sensible:
Would you mind taking a look at nbdkit-ssh-plugin? This is arguably more important (for Red Hat) since we no longer use the SSH driver in qemu for V2V and switched to using nbdkit some time ago. The nbdkit-ssh-plugin appears to only support SHA1 from a cursory look.
Rich.
Quoted 231 lines
Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "
known_hosts" fileqemu-img: Could not open '
TEST_IMG': no host key was found inknown_hostsit seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.
At least the sha256 verification step I added to 207 does pass though.
block/ssh.c | 3 +++ qapi/block-core.json | 3 ++- tests/qemu-iotests/207 | 54 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/207.out | 25 ++++++++++++++++++ 4 files changed, 84 insertions(+), 1 deletion(-)block/ssh.c +3
-0@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp) }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1 ) {return check_host_key_hash (s, hkc->u.hash.hash,SSH_PUBLICKEY_HASH_SHA1 , errp); + }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256 ) { +return check_host_key_hash (s, hkc->u.hash.hash, +SSH_PUBLICKEY_HASH_SHA256 , errp); }g_assert_not_reached ();break ;qapi/block-core.json +2
-1@@ -3186,11 +3186,12 @@ # # @md5: The given hash is an md5 hash # @sha1: The given hash is an sha1 hash +# @sha256: The given hash is an sha256 hash # # Since: 2.12 ## { 'enum': 'SshHostKeyCheckHashType', - 'data': [ 'md5', 'sha1' ] } + 'data': [ 'md5', 'sha1', 'sha256' ] } ## # @SshHostKeyHash:tests/qemu-iotests/207 +54
-0@@ -73,6 +73,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.log("=== Test host-key-check options ===") iotests.log("") + iotests.log("--- no host key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -90,6 +93,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- known_hosts key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -115,6 +121,7 @@ with iotests.FilePath('t.img') as disk_path, \ # Mappings of base64 representations to digests md5_keys = {} sha1_keys = {} + sha256_keys = {} for key in keys: md5_keys[key] = subprocess.check_output(@@ -125,6 +132,10 @@ with iotests.FilePath('t.img') as disk_path, \ 'echo %s | base64 -d | sha1sum -b | cut -d" " -f1' % key, shell=True).rstrip().decode('ascii') + sha256_keys[key] = subprocess.check_output( + 'echo %s | base64 -d | sha256sum -b | cut -d" " -f1' % key, + shell=True).rstrip().decode('ascii') + vm.launch() # Find correct key first@@ -150,6 +161,9 @@ with iotests.FilePath('t.img') as disk_path, \ vm.shutdown() iotests.notrun('Did not find a key that fits 127.0.0.1') + iotests.log("--- explicit md5 key checking --") + iotests.log("") + blockdev_create(vm, { 'driver': 'ssh', 'location': { 'path': disk_path,@@ -164,6 +178,7 @@ with iotests.FilePath('t.img') as disk_path, \ } }, 'size': 2097152 }) + blockdev_create(vm, { 'driver': 'ssh', 'location': { 'path': disk_path,@@ -182,6 +197,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- explicit sha1 key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -215,6 +233,42 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- explicit sha256 key checking --") + iotests.log("") + + vm.launch() + blockdev_create(vm, { 'driver': 'ssh', + 'location': { + 'path': disk_path, + 'server': { + 'host': '127.0.0.1', + 'port': '22' + }, + 'host-key-check': { + 'mode': 'hash', + 'type': 'sha256', + 'hash': 'wrong', + } + }, + 'size': 2097152 }) + blockdev_create(vm, { 'driver': 'ssh', + 'location': { + 'path': disk_path, + 'server': { + 'host': '127.0.0.1', + 'port': '22' + }, + 'host-key-check': { + 'mode': 'hash', + 'type': 'sha256', + 'hash': sha256_keys[matching_key], + } + }, + 'size': 4194304 }) + vm.shutdown() + + iotests.img_info_log(remote_path) + # # Invalid path and user #tests/qemu-iotests/207.out +25
-0@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes) === Test host-key-check options === +--- no host key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}@@ -25,6 +27,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- known_hosts key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}@@ -34,6 +38,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit md5 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'@@ -49,6 +55,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- explicit sha1 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'@@ -64,6 +72,23 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit sha256 key checking -- + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} +{"return": {}} +Job failed: remote host key does not match host_key_check 'wrong' +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} +{"return": {}} +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +image: TEST_IMG +file format: IMGFMT +virtual size: 4 MiB (4194304 bytes) + === Invalid path and user === {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}Signature · 1 line
2.31.1
Signature · 5 lines
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top
Quoted 12 lines · Daniel P. Berrangé
Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.
Signed-off-by Daniel P. Berrangé <[email protected]>---
Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "
known_hosts" file
Quoted 8 lines
qemu-img: Could not open '
TEST_IMG': no host key was found inknown_hostsit seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.
At least the sha256 verification step I added to 207 does pass though.
+Pino
Quoted 11 lines
block/ssh.c | 3 +++ qapi/block-core.json | 3 ++- tests/qemu-iotests/207 | 54 ++++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/207.out | 25 ++++++++++++++++++ 4 files changed, 84 insertions(+), 1 deletion(-)block/ssh.c +0
-0
block/ssh.c static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp) · line 447
Quoted 6 lines
block/ssh.c +3
-0@@ -442,6 +442,9 @@ static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp) }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1 ) {return check_host_key_hash (s, hkc->u.hash.hash,SSH_PUBLICKEY_HASH_SHA1 , errp); + }else if (hkc->u.hash.type ==SSH_HOST_KEY_CHECK_HASH_TYPE_SHA256 ) { +return check_host_key_hash (s, hkc->u.hash.hash, +SSH_PUBLICKEY_HASH_SHA256 , errp);
Easier to read as a switch() :)
Quoted 200 lines
block/ssh.c +0
-0}g_assert_not_reached ();break ;qapi/block-core.json +2
-1@@ -3186,11 +3186,12 @@ # # @md5: The given hash is an md5 hash # @sha1: The given hash is an sha1 hash +# @sha256: The given hash is an sha256 hash # # Since: 2.12 ## { 'enum': 'SshHostKeyCheckHashType', - 'data': [ 'md5', 'sha1' ] } + 'data': [ 'md5', 'sha1', 'sha256' ] } ## # @SshHostKeyHash:tests/qemu-iotests/207 +54
-0@@ -73,6 +73,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.log("=== Test host-key-check options ===") iotests.log("") + iotests.log("--- no host key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -90,6 +93,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- known_hosts key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -115,6 +121,7 @@ with iotests.FilePath('t.img') as disk_path, \ # Mappings of base64 representations to digests md5_keys = {} sha1_keys = {} + sha256_keys = {} for key in keys: md5_keys[key] = subprocess.check_output(@@ -125,6 +132,10 @@ with iotests.FilePath('t.img') as disk_path, \ 'echo %s | base64 -d | sha1sum -b | cut -d" " -f1' % key, shell=True).rstrip().decode('ascii') + sha256_keys[key] = subprocess.check_output( + 'echo %s | base64 -d | sha256sum -b | cut -d" " -f1' % key, + shell=True).rstrip().decode('ascii') + vm.launch() # Find correct key first@@ -150,6 +161,9 @@ with iotests.FilePath('t.img') as disk_path, \ vm.shutdown() iotests.notrun('Did not find a key that fits 127.0.0.1') + iotests.log("--- explicit md5 key checking --") + iotests.log("") + blockdev_create(vm, { 'driver': 'ssh', 'location': { 'path': disk_path,@@ -164,6 +178,7 @@ with iotests.FilePath('t.img') as disk_path, \ } }, 'size': 2097152 }) + blockdev_create(vm, { 'driver': 'ssh', 'location': { 'path': disk_path,@@ -182,6 +197,9 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- explicit sha1 key checking --") + iotests.log("") + vm.launch() blockdev_create(vm, { 'driver': 'ssh', 'location': {@@ -215,6 +233,42 @@ with iotests.FilePath('t.img') as disk_path, \ iotests.img_info_log(remote_path) + iotests.log("--- explicit sha256 key checking --") + iotests.log("") + + vm.launch() + blockdev_create(vm, { 'driver': 'ssh', + 'location': { + 'path': disk_path, + 'server': { + 'host': '127.0.0.1', + 'port': '22' + }, + 'host-key-check': { + 'mode': 'hash', + 'type': 'sha256', + 'hash': 'wrong', + } + }, + 'size': 2097152 }) + blockdev_create(vm, { 'driver': 'ssh', + 'location': { + 'path': disk_path, + 'server': { + 'host': '127.0.0.1', + 'port': '22' + }, + 'host-key-check': { + 'mode': 'hash', + 'type': 'sha256', + 'hash': sha256_keys[matching_key], + } + }, + 'size': 4194304 }) + vm.shutdown() + + iotests.img_info_log(remote_path) + # # Invalid path and user #tests/qemu-iotests/207.out +25
-0@@ -16,6 +16,8 @@ virtual size: 4 MiB (4194304 bytes) === Test host-key-check options === +--- no host key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 8388608}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}@@ -25,6 +27,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- known_hosts key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "known_hosts"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} {"return": {}} {"execute": "job-dismiss", "arguments": {"id": "job0"}}@@ -34,6 +38,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit md5 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "md5"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'@@ -49,6 +55,8 @@ image: TEST_IMG file format: IMGFMT virtual size: 8 MiB (8388608 bytes) +--- explicit sha1 key checking -- + {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha1"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} {"return": {}} Job failed: remote host key does not match host_key_check 'wrong'@@ -64,6 +72,23 @@ image: TEST_IMG file format: IMGFMT virtual size: 4 MiB (4194304 bytes) +--- explicit sha256 key checking -- + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "wrong", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 2097152}}} +{"return": {}} +Job failed: remote host key does not match host_key_check 'wrong' +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"hash": "HASH", "mode": "hash", "type": "sha256"}, "path": "TEST_DIR/PID-t.img", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}} +{"return": {}} +{"execute": "job-dismiss", "arguments": {"id": "job0"}} +{"return": {}} + +image: TEST_IMG +file format: IMGFMT +virtual size: 4 MiB (4194304 bytes) + === Invalid path and user === {"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path": "/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port": "22"}}, "size": 4194304}}}
Kevin Wolf
AppliedAm 22.06.2021 um 13:51 hat Daniel P. Berrangé geschrieben:
Quoted 7 lines
Currently the SSH block driver supports MD5 and SHA1 for host key fingerprints. This is a cryptographically sensitive operation and so these hash algorithms are inadequate by modern standards. This adds support for SHA256 which has been supported in libssh since the 0.8.1 release.
Signed-off-by Daniel P. Berrangé <[email protected]>
Thanks, applied to the block branch.
Quoted 11 lines
Note I can't actually get iotest '207' to fully pass. It always complains that it can't validate the "
known_hosts" fileqemu-img: Could not open '
TEST_IMG': no host key was found inknown_hostsit seems to rely on some specific developer host setup that my laptop doesn't satisfy. It would be useful if any pre-requisite could be documented in the iotest.
At least the sha256 verification step I added to 207 does pass though.
It passes for me when I make sure to add 127.0.0.1 to known_hosts first. My ~/.ssh/config also has these lines, probably from a previous run, which may or may not be necessary:
Host 127.0.0.1
HostKeyAlgorithms ssh-rsa
Kevin