ARM: dts: aspeed: Rainier remove PSU gpio-keys
Subsystems (2)
PATCH 1/1 ARM: dts: aspeed: Rainier remove PSU gpio-keys
From: "B. J. Wyman" <[email protected]>
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod.
--- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 28 -------------------- 1 file changed, 28 deletions(-)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +0 -28
@@ -116,34 +116,6 @@ vga_memory: region at bf000000 { }; }; - gpio-keys { - compatible = "gpio-keys"; - - ps0-presence { - label = "ps0-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 0)>; - }; - - ps1-presence { - label = "ps1-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 1)>; - }; - - ps2-presence { - label = "ps2-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 2)>; - }; - - ps3-presence { - label = "ps3-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 3)>; - }; - }; - i2c2mux: i2cmux { compatible = "i2c-mux-gpio"; #address-cells = <1>;
Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: aspeed: Rainier remove PSU gpio-keys
Quoted 6 lines · Brandon Wyman
From: "B. J. Wyman" <[email protected]>
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod.
Have they already added support for libgpiod? We should support both at least while we're switching over.
Andrew
PATCH 1/1 ARM: dts: aspeed: Rainier remove PSU gpio-keys
Quoted 10 lines · Andrew Jeffery
Quoted 6 lines · Brandon Wyman
From: "B. J. Wyman" <[email protected]>
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod.
Have they already added support for libgpiod? We should support both at least while we're switching over.
There is a change, hopefully nearing the end of review, that will support both.
Quoted 2 lines
Andrew