Skip to contentSkip to conversation

hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned

PATCH Applied Bin Meng 2 participants 3 messages Jul 8, 2021 – Jul 9, 2021

Subsystems (2)
lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH 1/1 hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned

Currently the firmware dynamic info (fw_dyn) is put right after the reset vector, which is not 8-byte aligned on RV64. OpenSBI fw_dynamic uses ld to read contents from 'struct fw_dynamic_info', which expects fw_dyn to be on the 8-byte boundary, otherwise the misaligned load exception may happen. Fortunately this does not cause any issue on QEMU, as QEMU does support misaligned load.

RV32 does not have any issue as it is 4-byte aligned already. Change to make sure it is 8-byte aligned which works for both RV32 and RV64.

---

 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
hw/riscv/sifive_u.c +3 -2
index 273c86418c..4d99566e62 100644
@@ -599,10 +599,10 @@ static void sifive_u_machine_init(MachineState *machine)
     }
 
     /* reset vector */
-    uint32_t reset_vec[11] = {
+    uint32_t reset_vec[12] = {
         s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
-        0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
+        0x02c28613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
         0,
         0,
@@ -610,6 +610,7 @@ static void sifive_u_machine_init(MachineState *machine)
         start_addr,                    /* start: .dword */
         start_addr_hi32,
         fdt_load_addr,                 /* fdt_laddr: .dword */
+        0x00000000,
         0x00000000,
                                        /* fw_dyn: */
     };
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Bin Meng

Currently the firmware dynamic info (fw_dyn) is put right after the reset vector, which is not 8-byte aligned on RV64. OpenSBI fw_dynamic uses ld to read contents from 'struct fw_dynamic_info', which expects fw_dyn to be on the 8-byte boundary, otherwise the misaligned load exception may happen. Fortunately this does not cause any issue on QEMU, as QEMU does support misaligned load.

Quoted 5 lines

RV32 does not have any issue as it is 4-byte aligned already. Change to make sure it is 8-byte aligned which works for both RV32 and RV64.

Alistair

Quoted 34 lines

---

 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
hw/riscv/sifive_u.c +3 -3
index 273c86418c..4d99566e62 100644
@@ -599,10 +599,10 @@ static void sifive_u_machine_init(MachineState *machine)
     }
 
     /* reset vector */
-    uint32_t reset_vec[11] = {
+    uint32_t reset_vec[12] = {
         s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
-        0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
+        0x02c28613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
         0,
         0,
@@ -610,6 +610,7 @@ static void sifive_u_machine_init(MachineState *machine)
         start_addr,                    /* start: .dword */
         start_addr_hi32,
         fdt_load_addr,                 /* fdt_laddr: .dword */
+        0x00000000,
         0x00000000,
                                        /* fw_dyn: */
     };
--

2.25.1

#2 lore raw
In reply to Bin Meng
Quoted 8 lines · Bin Meng

Currently the firmware dynamic info (fw_dyn) is put right after the reset vector, which is not 8-byte aligned on RV64. OpenSBI fw_dynamic uses ld to read contents from 'struct fw_dynamic_info', which expects fw_dyn to be on the 8-byte boundary, otherwise the misaligned load exception may happen. Fortunately this does not cause any issue on QEMU, as QEMU does support misaligned load.

Quoted 5 lines

RV32 does not have any issue as it is 4-byte aligned already. Change to make sure it is 8-byte aligned which works for both RV32 and RV64.

Thanks!

Applied to riscv-to-apply.next

Alistair

Quoted 34 lines

---

 hw/riscv/sifive_u.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
hw/riscv/sifive_u.c +3 -3
index 273c86418c..4d99566e62 100644
@@ -599,10 +599,10 @@ static void sifive_u_machine_init(MachineState *machine)
     }
 
     /* reset vector */
-    uint32_t reset_vec[11] = {
+    uint32_t reset_vec[12] = {
         s->msel,                       /* MSEL pin state */
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
-        0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
+        0x02c28613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
         0,
         0,
@@ -610,6 +610,7 @@ static void sifive_u_machine_init(MachineState *machine)
         start_addr,                    /* start: .dword */
         start_addr_hi32,
         fdt_load_addr,                 /* fdt_laddr: .dword */
+        0x00000000,
         0x00000000,
                                        /* fw_dyn: */
     };
--

2.25.1