Skip to contentSkip to conversation

dt-bindings: i2c: brcm, iproc-i2c: convert to the json-schema

PATCH RESEND Applied Rafał Miłecki 2 participants 2 messages Jul 13, 2021 – Jul 15, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 dt-bindings: i2c: brcm, iproc-i2c: convert to the json-schema

From: Rafał Miłecki <[email protected]>

This helps validating DTS files.

Introduced changes:
1. Added arm-gic.h include

---
RESEND: commit 11480dbfe1d5 ("ASoC: wm8750: convert to the json-schema") is part of the 5.14-rc1 so Rob's bot should be happy this time.

---
 .../bindings/i2c/brcm,iproc-i2c.txt           | 46 ------------
 .../bindings/i2c/brcm,iproc-i2c.yaml          | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt deleted +0 -46
deleted file mode 100644
index d12cc33cca6c..000000000000
@@ -1,46 +0,0 @@
-Broadcom iProc I2C controller
-
-Required properties:
-
-- compatible:
-    Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
-
-- reg:
-    Define the base and range of the I/O address space that contain the iProc
-    I2C controller registers
-
-- clock-frequency:
-    This is the I2C bus clock. Need to be either 100000 or 400000
-
-- #address-cells:
-    Always 1 (for I2C addresses)
-
-- #size-cells:
-    Always 0
-
-Optional properties:
-
-- interrupts:
-    Should contain the I2C interrupt. For certain revisions of the I2C
-    controller, I2C interrupt is unwired to the interrupt controller. In such
-    case, this property should be left unspecified, and driver will fall back
-    to polling mode
-
-- brcm,ape-hsls-addr-mask:
-    Required for "brcm,iproc-nic-i2c". Host view of address mask into the
-    'APE' co-processor. Value must be unsigned, 32-bit
-
-Example:
-	i2c0: i2c@18008000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-
-		codec: wm8750@1a {
-			compatible = "wlf,wm8750";
-			reg = <0x1a>;
-		};
-	};
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml new file +71 -0

71 lines not on this page · raw message

Signature · 1 line
2.26.2
maintainer Applied
#1 lore raw

Re: [PATCH RESEND] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema

Quoted 11 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

This helps validating DTS files.

Introduced changes:
1. Added arm-gic.h include

---
RESEND: commit 11480dbfe1d5 ("ASoC: wm8750: convert to the json-schema") is part of the 5.14-rc1 so Rob's bot should be happy this time.

Quoted 7 lines
---
 .../bindings/i2c/brcm,iproc-i2c.txt           | 46 ------------
 .../bindings/i2c/brcm,iproc-i2c.yaml          | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml

Applied, thanks!