dt-bindings: i2c: brcm, iproc-i2c: convert to the json-schema
PATCH RESEND 1/1 dt-bindings: i2c: brcm, iproc-i2c: convert to the json-schema
From: Rafał Miłecki <[email protected]>
This helps validating DTS files.
Introduced changes:
1. Added arm-gic.h include
Signed-off-by Rafał Miłecki <[email protected]>
---
RESEND: commit 11480dbfe1d5 ("ASoC: wm8750: convert to the json-schema") is part of the 5.14-rc1 so Rob's bot should be happy this time.
--- .../bindings/i2c/brcm,iproc-i2c.txt | 46 ------------ .../bindings/i2c/brcm,iproc-i2c.yaml | 71 +++++++++++++++++++ 2 files changed, 71 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt deleted +0 -46
@@ -1,46 +0,0 @@ -Broadcom iProc I2C controller - -Required properties: - -- compatible: - Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c" - -- reg: - Define the base and range of the I/O address space that contain the iProc - I2C controller registers - -- clock-frequency: - This is the I2C bus clock. Need to be either 100000 or 400000 - -- #address-cells: - Always 1 (for I2C addresses) - -- #size-cells: - Always 0 - -Optional properties: - -- interrupts: - Should contain the I2C interrupt. For certain revisions of the I2C - controller, I2C interrupt is unwired to the interrupt controller. In such - case, this property should be left unspecified, and driver will fall back - to polling mode - -- brcm,ape-hsls-addr-mask: - Required for "brcm,iproc-nic-i2c". Host view of address mask into the - 'APE' co-processor. Value must be unsigned, 32-bit - -Example: - i2c0: i2c@18008000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - - codec: wm8750@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; - }; - };
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml new file +71 -0
71 lines not on this page · raw message
Signature · 1 line
2.26.2
Re: [PATCH RESEND] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
Quoted 11 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
This helps validating DTS files.
Introduced changes:
1. Addedarm-gic.hincludeSigned-off-by Rafał Miłecki <[email protected]>---
RESEND: commit11480dbfe1d5("ASoC: wm8750: convert to the json-schema") is part of the 5.14-rc1 so Rob's bot should be happy this time.
Quoted 7 lines
--- .../bindings/i2c/brcm,iproc-i2c.txt | 46 ------------ .../bindings/i2c/brcm,iproc-i2c.yaml | 71 +++++++++++++++++++ 2 files changed, 71 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
Applied, thanks!