5.10.51-rc1 review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 5.10.51-rc1 review
This is the start of the stable review cycle for the 5.10.51 release. There are 215 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.51-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.51-rc1
Chao Yu <[email protected]>
f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances
Pavel Skripkin <[email protected]>
ext4: fix memory leak in ext4_fill_super
Tetsuo Handa <[email protected]>
smackfs: restrict bytes count in smk_set_cipso()
Pavel Skripkin <[email protected]>
jfs: fix GPF in diFree
Thomas Zimmermann <[email protected]>
drm/ast: Remove reference to struct drm_device.pdev
Zou Wei <[email protected]>
pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
Mikulas Patocka <[email protected]>
dm writecache: write at least 4k when committing
Yang Yingliang <[email protected]>
io_uring: fix clear IORING_SETUP_R_DISABLED in wrong function
Benjamin Drung <[email protected]>
media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K
Johan Hovold <[email protected]>
media: rtl28xxu: fix zero-length control request
Johan Hovold <[email protected]>
media: gspca/sunplus: fix zero-length control requests
Johan Hovold <[email protected]>
media: gspca/sq905: fix control-request direction
Pavel Skripkin <[email protected]>
media: zr364xx: fix memory leak in zr364xx_start_readpipe
Johan Hovold <[email protected]>
media: dtv5100: fix control-request directions
Arnd Bergmann <[email protected]>
media: subdev: disallow ioctl for saa6588/davinci
Pali Rohár <[email protected]>
PCI: aardvark: Implement workaround for the readback value of VEND_ID
Pali Rohár <[email protected]>
PCI: aardvark: Fix checking for PIO Non-posted Request
Konstantin Kharlamov <[email protected]>
PCI: Leave Apple Thunderbolt controllers on for s2idle or standby
Hou Tao <[email protected]>
dm btree remove: assign new_root only when removal succeeds
Mikulas Patocka <[email protected]>
dm writecache: flush origin device when writing and cache is full
Damien Le Moal <[email protected]>
dm zoned: check zone capacity
Sai Prakash Ranjan <[email protected]>
coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer()
Jeremy Linton <[email protected]>
coresight: Propagate symlink failure
Lv Yunlong <[email protected]>
ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe
Paul Burton <[email protected]>
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
Paul Burton <[email protected]>
tracing: Simplify & fix saved_tgids logic
Jan Kara <[email protected]>
rq-qos: fix missed wake-ups in rq_qos_throttle try two
Yun Zhou <[email protected]>
seq_buf: Fix overflow in seq_buf_putmem_hex()
Ferry Toth <[email protected]>
extcon: intel-mrfld: Sync hardware and software state on init
Kees Cook <[email protected]>
selftests/lkdtm: Fix expected text for CR4 pinning
Kees Cook <[email protected]>
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
Christophe JAILLET <[email protected]>
nvmem: core: add a missing of_node_put
Limeng <[email protected]>
mfd: syscon: Free the allocated name field of struct regmap_config
Linus Walleij <[email protected]>
power: supply: ab8500: Fix an old bug
Zhihao Cheng <[email protected]>
ubifs: Fix races between xattr_{set|get} and listxattr operations
Srinivas Pandruvada <[email protected]>
thermal/drivers/int340x/processor_thermal: Fix tcc setting
Varad Gautam <[email protected]>
xfrm: policy: Read seqcount outside of rcu-read side in xfrm_policy_lookup_bytype
Petr Pavlu <[email protected]>
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
Nathan Chancellor <[email protected]>
qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute
Jesse Brandeburg <[email protected]>
i40e: fix PTP on 5Gb links
Dmitry Osipenko <[email protected]>
ASoC: tegra: Set driver_name=tegra for all machine drivers
Russ Weight <[email protected]>
fpga: stratix10-soc: Add missing fpga_mgr_free() call
Samuel Holland <[email protected]>
clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround
Thomas Gleixner <[email protected]>
cpu/hotplug: Cure the cpusets trainwreck
Zhenyu Ye <[email protected]>
arm64: tlb: fix the TTL value of tlb_get_level
Timo Sigurdsson <[email protected]>
ata: ahci_sunxi: Disable DIPM
Christian Löhle <[email protected]>
mmc: core: Allow UHS-I voltage switch for SDSC cards if supported
Wolfram Sang <[email protected]>
mmc: core: clear flags before allowing to retune
Al Cooper <[email protected]>
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
Hans de Goede <[email protected]>
mmc: sdhci-acpi: Disable write protect detection on Toshiba Encore 2 WT8-B
Kees Cook <[email protected]>
drm/i915/display: Do not zero past infoframes.vsc
Daniel Vetter <[email protected]>
drm/nouveau: Don't set allow_fb_modifiers explicitly
Daniel Vetter <[email protected]>
drm/arm/malidp: Always list modifiers
Daniel Vetter <[email protected]>
drm/msm/mdp4: Fix modifier support enabling
Daniel Vetter <[email protected]>
drm/tegra: Don't set allow_fb_modifiers explicitly
Harry Wentland <[email protected]>
drm/amd/display: Reject non-zero src_y and src_x for video planes
Maximilian Luz <[email protected]>
pinctrl/amd: Add device HID for new AMD GPIO controller
Guchun Chen <[email protected]>
drm/amd/display: fix incorrrect valid irq check
Thomas Hebb <[email protected]>
drm/rockchip: dsi: remove extra component_del() call
Lyude Paul <[email protected]>
drm/dp: Handle zeroed port counts in drm_dp_read_downstream_info()
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Prevent clock unbalance
Maxime Ripard <[email protected]>
drm/vc4: crtc: Skip the TXP
Maxime Ripard <[email protected]>
drm/vc4: txp: Properly set the possible_crtcs mask
Tiezhu Yang <[email protected]>
drm/radeon: Call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64
Jing Xiangfeng <[email protected]>
drm/radeon: Add the missed drm_gem_object_put() in radeon_user_framebuffer_create()
Aaron Liu <[email protected]>
drm/amdgpu: enable sdma0 tmz for Raven/Renoir(V2)
Joseph Greathouse <[email protected]>
drm/amdgpu: Update NV SIMD-per-CU to 2
Haren Myneni <[email protected]>
powerpc/powernv/vas: Release reference to tgid during window close
Nathan Chancellor <[email protected]>
powerpc/barrier: Avoid collision with clang's __lwsync macro
Christophe Leroy <[email protected]>
powerpc/mm: Fix lockup on kernel exec fault
Mike Christie <[email protected]>
scsi: iscsi: Fix iSCSI cls conn state
Gulam Mohamed <[email protected]>
scsi: iscsi: Fix race condition between login and sync thread
Jens Axboe <[email protected]>
io_uring: convert io_buffer_idr to XArray
Matthew Wilcox (Oracle) <[email protected]>
io_uring: Convert personality_idr to XArray
Yejune Deng <[email protected]>
io_uring: simplify io_remove_personalities()
Oscar Salvador <[email protected]>
mm,hwpoison: return -EBUSY when migration fails
Mauricio Faria de Oliveira <[email protected]>
loop: fix I/O error on fsync() in detached loop devices
Mike Rapoport <[email protected]>
mm/page_alloc: fix memory map initialization for descending nodes
Cameron Nemo <[email protected]>
arm64: dts: rockchip: Enable USB3 for rk3328 Rock64
Cameron Nemo <[email protected]>
arm64: dts: rockchip: add rk3328 dwc3 usb controller node
Dan Carpenter <[email protected]>
ath11k: unlock on error path in ath11k_mac_op_add_interface()
Paul Cercueil <[email protected]>
MIPS: MT extensions are not available on MIPS32r1
Xiaochen Shen <[email protected]>
selftests/resctrl: Fix incorrect parsing of option "-t"
Nick Desaulniers <[email protected]>
MIPS: set mips32r5 for virt extensions
zhanglianjie <[email protected]>
MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
Marcelo Ricardo Leitner <[email protected]>
sctp: add size validation when walking chunks
Marcelo Ricardo Leitner <[email protected]>
sctp: validate from_addr_param return
gushengxian <[email protected]>
flow_offload: action should not be NULL when it is referenced
Rustam Kovhaev <[email protected]>
bpf: Fix false positive kmemleak report in bpf_ringbuf_area_alloc()
Odin Ugedal <[email protected]>
sched/fair: Ensure _sum and _avg values stay consistent
Tim Jiang <[email protected]>
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
Tedd Ho-Jeong An <[email protected]>
Bluetooth: mgmt: Fix the command returns garbage parameter value
Hilda Wu <[email protected]>
Bluetooth: btusb: Add support USB ALT 3 for WBS
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix invalid access on ECRED Connection response
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure fails
Daniel Lenski <[email protected]>
Bluetooth: btusb: Add a new QCA_ROME device (0cf3:e500)
Kai-Heng Feng <[email protected]>
Bluetooth: Shutdown controller after workqueues are flushed or cancelled
Kiran K <[email protected]>
Bluetooth: Fix alt settings for incoming SCO with transparent coding format
Yu Liu <[email protected]>
Bluetooth: Fix the HCI to MGMT status conversion table
mark-yw.chen <[email protected]>
Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.
Gerd Rausch <[email protected]>
RDMA/cma: Fix rdma_resolve_route() memory leak
Jakub Kicinski <[email protected]>
net: ip: avoid OOM kills with large UDP sends over loopback
Sean Young <[email protected]>
media, bpf: Do not copy more entries than user space requested
Max Gurtovoy <[email protected]>
IB/isert: Align target max I/O size to initiator size
Weilun Du <[email protected]>
mac80211_hwsim: add concurrent channels scanning support over virtio
Johannes Berg <[email protected]>
mac80211: consider per-CPU statistics if present
Ping-Ke Shih <[email protected]>
cfg80211: fix default HE tx bitrate mask in 2G band
Gustavo A. R. Silva <[email protected]>
wireless: wext-spy: Fix out-of-bounds warning
Íñigo Huguet <[email protected]>
sfc: error code if SRIOV cannot be disabled
Íñigo Huguet <[email protected]>
sfc: avoid double pci_remove of VFs
Johannes Berg <[email protected]>
iwlwifi: pcie: fix context info freeing
Johannes Berg <[email protected]>
iwlwifi: pcie: free IML DMA memory allocation
Shaul Triebitz <[email protected]>
iwlwifi: mvm: fix error print when session protection ends
Johannes Berg <[email protected]>
iwlwifi: mvm: don't change band on bound PHY contexts
Xiao Yang <[email protected]>
RDMA/rxe: Don't overwrite errno from ib_umem_get()
Longpeng(Mike) <[email protected]>
vsock: notify server to shutdown when client has pending signal
Zheyu Ma <[email protected]>
atm: nicstar: register the interrupt handler in the right place
Zheyu Ma <[email protected]>
atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
Fugang Duan <[email protected]>
net: fec: add ndo_select_queue to fix TX bandwidth fluctuations
Huang Pei <[email protected]>
MIPS: add PMD table accounting into MIPS'pmd_alloc_one
Pascal Terjan <[email protected]>
rtl8xxxu: Fix device info for RTL8192EU devices
Ryder Lee <[email protected]>
mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode
xinhui pan <[email protected]>
drm/amdkfd: Walk through list with dqm lock hold
Stanley.Yang <[email protected]>
drm/amdgpu: fix bad address translation for sienna_cichlid
Pavel Begunkov <[email protected]>
io_uring: fix false WARN_ONCE
Yang Yingliang <[email protected]>
net: sched: fix error return code in tcf_del_walker()
Yang Yingliang <[email protected]>
net: ipa: Add missing of_node_put() in ipa_firmware_load()
Jian Shen <[email protected]>
net: fix mistake path for netdev_features_strings
Felix Fietkau <[email protected]>
mt76: mt7615: fix fixed-rate tx status reporting
Jacob Keller <[email protected]>
ice: mark PTYPE 2 as reserved
Jacob Keller <[email protected]>
ice: fix incorrect payload indicator on PTYPE
Daniel Borkmann <[email protected]>
bpf: Fix up register-based shifts in interpreter to silence KUBSAN
Amber Lin <[email protected]>
drm/amdkfd: Fix circular lock in nocpsch path
Jonathan Kim <[email protected]>
drm/amdkfd: fix circular locking on get_wave_state
Zou Wei <[email protected]>
cw1200: add missing MODULE_DEVICE_TABLE
Lee Gibson <[email protected]>
wl1251: Fix possible buffer overflow in wl1251_cmd_scan
Tony Lindgren <[email protected]>
wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
Mikulas Patocka <[email protected]>
dm writecache: commit just one block, not a full page
Steffen Klassert <[email protected]>
xfrm: Fix error reporting in xfrm_state_construct.
Mark Yacoub <[email protected]>
drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_check
Heiner Kallweit <[email protected]>
r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM
Minchan Kim <[email protected]>
selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
Yang Yingliang <[email protected]>
fjes: check return value after calling platform_get_resource()
Nirmoy Das <[email protected]>
drm/amdkfd: use allowed domain for vmbo validation
Yang Yingliang <[email protected]>
net: sgi: ioc3-eth: check return value after calling platform_get_resource()
Amit Cohen <[email protected]>
selftests: Clean forgotten resources as part of cleanup()
Joakim Zhang <[email protected]>
net: phy: realtek: add delay to fix RXC generation issue
Wesley Chalmers <[email protected]>
drm/amd/display: Fix off-by-one error in DML
Wesley Chalmers <[email protected]>
drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7
Vladimir Stempen <[email protected]>
drm/amd/display: Release MST resources on switch from MST to SST
Roman Li <[email protected]>
drm/amd/display: Update scaling settings on modeset
Nikola Cornij <[email protected]>
drm/amd/display: Fix DCN 3.01 DSCCLK validation
Yang Yingliang <[email protected]>
net: moxa: Use devm_platform_get_and_ioremap_resource()
Yang Yingliang <[email protected]>
net: micrel: check return value after calling platform_get_resource()
Yang Yingliang <[email protected]>
net: mvpp2: check return value after calling platform_get_resource()
Yang Yingliang <[email protected]>
net: bcmgenet: check return value after calling platform_get_resource()
Yang Yingliang <[email protected]>
net: mscc: ocelot: check return value after calling platform_get_resource()
Xianting Tian <[email protected]>
virtio_net: Remove BUG() to avoid machine dead
Paul M Stillwell Jr <[email protected]>
ice: fix clang warning regarding deadcode.DeadStores
Liwei Song <[email protected]>
ice: set the value of global config lock timeout longer
Radim Pavlik <[email protected]>
pinctrl: mcp23s08: fix race condition in irq handler
Horatiu Vultur <[email protected]>
net: bridge: mrp: Update ring transitions.
Damien Le Moal <[email protected]>
dm: Fix dm_accept_partial_bio() relative to zone management commands
Mikulas Patocka <[email protected]>
dm writecache: don't split bios when overwriting contiguous cache content
Joe Thornber <[email protected]>
dm space maps: don't reset space map allocation cursor when committing
Jiapeng Chong <[email protected]>
RDMA/cxgb4: Fix missing error code in create_qp()
Yuchung Cheng <[email protected]>
net: tcp better handling of reordering then loss cases
Jiansong Chen <[email protected]>
drm/amdgpu: remove unsafe optimization to drop preamble ib
Kees Cook <[email protected]>
drm/amd/display: Avoid HDCP over-read and corruption
Paul Cercueil <[email protected]>
MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
Paul Cercueil <[email protected]>
MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
Willy Tarreau <[email protected]>
ipv6: use prandom_u32() for ID generation
Xie Yongji <[email protected]>
virtio-net: Add validation for used length
Yu Kuai <[email protected]>
drm: bridge: cdns-mhdp8546: Fix PM reference leak in
Dmitry Osipenko <[email protected]>
clk: tegra: Ensure that PLLU configuration is applied properly
Dmitry Osipenko <[email protected]>
clk: tegra: Fix refcounting of gate clocks
Gioh Kim <[email protected]>
RDMA/rtrs: Change MAX_SESS_QUEUE_DEPTH
Vladimir Oltean <[email protected]>
net: stmmac: the XPCS obscures a potential "PHY not found" error
Alex Bee <[email protected]>
drm: rockchip: add missing registers for RK3066
Alex Bee <[email protected]>
drm: rockchip: add missing registers for RK3188
Eli Cohen <[email protected]>
net/mlx5: Fix lag port remapping logic
Huy Nguyen <[email protected]>
net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
Kuninori Morimoto <[email protected]>
clk: renesas: r8a77995: Add ZA2 clock
Zou Wei <[email protected]>
drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()
Jesse Brandeburg <[email protected]>
igb: fix assignment on big endian machines
Jesse Brandeburg <[email protected]>
igb: handle vlan types with checker enabled
Jesse Brandeburg <[email protected]>
e100: handle eeprom as little endian
Zou Wei <[email protected]>
drm/vc4: hdmi: Fix PM reference leak in vc4_hdmi_encoder_pre_crtc_co()
Mateusz Kwiatkowski <[email protected]>
drm/vc4: Fix clock source for VEC PixelValve on BCM2711
Arturo Giusti <[email protected]>
udf: Fix NULL pointer dereference in udf_symlink function
Andrey Grodzovsky <[email protected]>
drm/sched: Avoid data corruptions
Andrey Grodzovsky <[email protected]>
drm/scheduler: Fix hang when sched_entity released
Bixuan Cui <[email protected]>
pinctrl: equilibrium: Add missing MODULE_DEVICE_TABLE
Davide Caratti <[email protected]>
net/sched: cls_api: increase max_reclassify_loop
Vladimir Oltean <[email protected]>
net: mdio: provide shim implementation of devm_of_mdiobus_register
Xie Yongji <[email protected]>
drm/virtio: Fix double free on probe failure
Pavel Skripkin <[email protected]>
reiserfs: add check for invalid 1st journal block
Zou Wei <[email protected]>
drm/bridge: lt9611: Add missing MODULE_DEVICE_TABLE
Ansuel Smith <[email protected]>
net: mdio: ipq8064: add regmap config to disable REGCACHE
Wang Li <[email protected]>
drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()
Sebastian Andrzej Siewior <[email protected]>
net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
Zou Wei <[email protected]>
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
Zou Wei <[email protected]>
mISDN: fix possible use-after-free in HFC_cleanup()
Zou Wei <[email protected]>
atm: iphase: fix possible use-after-free in ia_module_exit()
Bibo Mao <[email protected]>
hugetlb: clear huge pte during flush function on mips platform
Dinghao Liu <[email protected]>
clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
Dmytro Laktyushkin <[email protected]>
drm/amd/display: fix use_max_lb flag for 420 pixel formats
Andy Shevchenko <[email protected]>
net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()
Liu Ying <[email protected]>
drm/bridge: nwl-dsi: Force a full modeset when crtc_state->active is changed to be true
Dan Carpenter <[email protected]>
drm/vc4: fix argument ordering in vc4_crtc_get_margins()
Jack Zhang <[email protected]>
drm/amd/amdgpu/sriov disable all ip hw status by default
Brandon Syu <[email protected]>
drm/amd/display: fix HDCP reset sequence on reinitialize
KuoHsiang Chou <[email protected]>
drm/ast: Fixed CVE for DP501
Thomas Zimmermann <[email protected]>
drm/zte: Don't select DRM_KMS_FB_HELPER
Thomas Zimmermann <[email protected]>
drm/mxsfb: Don't select DRM_KMS_FB_HELPER
-------------
Diffstat:
Makefile | 4 +- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 + arch/arm64/boot/dts/rockchip/rk3328.dtsi | 19 +++ arch/arm64/include/asm/tlb.h | 4 + arch/mips/Kconfig | 2 + arch/mips/include/asm/cpu-features.h | 4 +- arch/mips/include/asm/hugetlb.h | 8 +- arch/mips/include/asm/mipsregs.h | 8 +- arch/mips/include/asm/pgalloc.h | 10 +- arch/mips/kernel/cpu-probe.c | 5 + arch/mips/loongson64/numa.c | 3 + arch/powerpc/include/asm/barrier.h | 2 + arch/powerpc/mm/fault.c | 4 +- arch/powerpc/platforms/powernv/vas-window.c | 9 +- block/blk-rq-qos.c | 4 +- drivers/ata/ahci_sunxi.c | 2 +- drivers/atm/iphase.c | 2 +- drivers/atm/nicstar.c | 26 ++-- drivers/block/loop.c | 3 + drivers/bluetooth/btusb.c | 24 +++- drivers/char/ipmi/ipmi_watchdog.c | 22 ++-- drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 + drivers/clk/renesas/rcar-usb2-clock-sel.c | 24 ++-- drivers/clk/tegra/clk-periph-gate.c | 72 +++++++---- drivers/clk/tegra/clk-periph.c | 11 ++ drivers/clk/tegra/clk-pll.c | 9 +- drivers/clocksource/arm_arch_timer.c | 2 +- drivers/extcon/extcon-intel-mrfld.c | 9 ++ drivers/firmware/qemu_fw_cfg.c | 8 +- drivers/fpga/stratix10-soc.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 21 +--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 11 +- drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h | 5 + drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 4 +- drivers/gpu/drm/amd/amdgpu/umc_v8_7.c | 2 +- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 68 +++++----- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 24 +++- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + .../drm/amd/display/amdgpu_dm/amdgpu_dm_color.c | 41 +++++- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 + .../gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 9 +- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 2 +- .../amd/display/dc/dml/dcn30/display_mode_vba_30.c | 78 +++++------- drivers/gpu/drm/amd/display/dc/irq_types.h | 2 +- drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c | 1 - .../drm/amd/display/modules/hdcp/hdcp1_execution.c | 4 +- drivers/gpu/drm/amd/include/navi10_enum.h | 2 +- drivers/gpu/drm/arm/malidp_planes.c | 9 +- drivers/gpu/drm/ast/ast_dp501.c | 139 +++++++++++++++------ drivers/gpu/drm/ast/ast_drv.h | 12 ++ drivers/gpu/drm/ast/ast_main.c | 11 +- .../gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 +- drivers/gpu/drm/bridge/cdns-dsi.c | 2 +- drivers/gpu/drm/bridge/lontium-lt9611.c | 1 + drivers/gpu/drm/bridge/nwl-dsi.c | 61 +++++---- drivers/gpu/drm/drm_dp_helper.c | 7 ++ drivers/gpu/drm/i915/display/intel_dp.c | 2 +- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +- drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 - drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c | 8 +- drivers/gpu/drm/mxsfb/Kconfig | 1 - drivers/gpu/drm/nouveau/nouveau_display.c | 1 - drivers/gpu/drm/radeon/radeon_display.c | 1 + drivers/gpu/drm/radeon/radeon_drv.c | 8 +- drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 4 - drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 21 ++-- drivers/gpu/drm/scheduler/sched_entity.c | 8 +- drivers/gpu/drm/scheduler/sched_main.c | 24 ++++ drivers/gpu/drm/tegra/dc.c | 10 +- drivers/gpu/drm/tegra/drm.c | 2 - drivers/gpu/drm/vc4/vc4_crtc.c | 5 +- drivers/gpu/drm/vc4/vc4_drv.h | 2 +- drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +- drivers/gpu/drm/vc4/vc4_txp.c | 2 +- drivers/gpu/drm/virtio/virtgpu_kms.c | 1 + drivers/gpu/drm/zte/Kconfig | 1 - drivers/hwtracing/coresight/coresight-core.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etf.c | 2 +- drivers/infiniband/core/cma.c | 3 +- drivers/infiniband/hw/cxgb4/qp.c | 1 + drivers/infiniband/sw/rxe/rxe_mr.c | 2 +- drivers/infiniband/ulp/isert/ib_isert.c | 4 +- drivers/infiniband/ulp/isert/ib_isert.h | 3 - drivers/infiniband/ulp/rtrs/rtrs-pri.h | 13 +- drivers/ipack/carriers/tpci200.c | 5 +- drivers/isdn/hardware/mISDN/hfcpci.c | 2 +- drivers/md/dm-writecache.c | 48 +++++-- drivers/md/dm-zoned-metadata.c | 7 ++ drivers/md/dm.c | 8 +- drivers/md/persistent-data/dm-btree-remove.c | 3 +- drivers/md/persistent-data/dm-space-map-disk.c | 9 +- drivers/md/persistent-data/dm-space-map-metadata.c | 9 +- drivers/media/i2c/saa6588.c | 4 +- drivers/media/pci/bt8xx/bttv-driver.c | 6 +- drivers/media/pci/saa7134/saa7134-video.c | 6 +- drivers/media/platform/davinci/vpbe_display.c | 2 +- drivers/media/platform/davinci/vpbe_venc.c | 6 +- drivers/media/rc/bpf-lirc.c | 3 +- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 3 +- drivers/media/usb/dvb-usb/dtv5100.c | 7 +- drivers/media/usb/gspca/sq905.c | 2 +- drivers/media/usb/gspca/sunplus.c | 8 +- drivers/media/usb/uvc/uvc_video.c | 27 ++++ drivers/media/usb/zr364xx/zr364xx.c | 1 + drivers/mfd/syscon.c | 2 +- drivers/misc/lkdtm/bugs.c | 3 + drivers/mmc/core/core.c | 7 +- drivers/mmc/core/sd.c | 10 +- drivers/mmc/host/sdhci-acpi.c | 11 ++ drivers/mmc/host/sdhci.c | 4 + drivers/mmc/host/sdhci.h | 1 + drivers/net/dsa/ocelot/seville_vsc9953.c | 5 + drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 + drivers/net/ethernet/freescale/fec_main.c | 32 +++++ drivers/net/ethernet/intel/e100.c | 12 +- drivers/net/ethernet/intel/i40e/i40e_ptp.c | 8 +- drivers/net/ethernet/intel/ice/ice_ethtool.c | 6 +- drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 4 +- drivers/net/ethernet/intel/ice/ice_type.h | 2 +- drivers/net/ethernet/intel/igb/igb_main.c | 9 +- drivers/net/ethernet/intel/igbvf/netdev.c | 4 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 4 + drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 +- drivers/net/ethernet/mellanox/mlx5/core/lag.c | 19 ++- drivers/net/ethernet/micrel/ks8842.c | 4 + drivers/net/ethernet/moxa/moxart_ether.c | 5 +- .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 +-- drivers/net/ethernet/realtek/r8169_main.c | 1 - drivers/net/ethernet/sfc/ef10_sriov.c | 25 ++-- drivers/net/ethernet/sgi/ioc3-eth.c | 4 + drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 21 +++- drivers/net/fjes/fjes_main.c | 4 + drivers/net/ipa/ipa_main.c | 1 + drivers/net/mdio/mdio-ipq8064.c | 33 +++-- drivers/net/phy/realtek.c | 15 ++- drivers/net/virtio_net.c | 22 ++-- drivers/net/wireless/ath/ath11k/mac.c | 4 +- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 +++- .../net/wireless/intel/iwlwifi/mvm/time-event.c | 4 + .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 15 ++- drivers/net/wireless/intel/iwlwifi/pcie/internal.h | 3 + .../net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 +- drivers/net/wireless/mac80211_hwsim.c | 48 +++++-- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 +- drivers/net/wireless/mediatek/mt76/mt7915/init.c | 6 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 11 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 59 ++++++++- drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 + drivers/net/wireless/ti/wl1251/cmd.c | 9 +- drivers/net/wireless/ti/wl12xx/main.c | 7 ++ drivers/nvmem/core.c | 9 +- drivers/pci/controller/pci-aardvark.c | 13 +- drivers/pci/quirks.c | 11 ++ drivers/pinctrl/pinctrl-amd.c | 1 + drivers/pinctrl/pinctrl-equilibrium.c | 1 + drivers/pinctrl/pinctrl-mcp23s08.c | 10 +- drivers/scsi/libiscsi.c | 26 +--- drivers/scsi/scsi_transport_iscsi.c | 28 ++++- .../int340x_thermal/processor_thermal_device.c | 20 +-- fs/ext4/ext4.h | 4 + fs/ext4/mmp.c | 28 ++--- fs/ext4/super.c | 10 +- fs/f2fs/f2fs.h | 2 + fs/f2fs/recovery.c | 23 ++-- fs/f2fs/super.c | 8 +- fs/io-wq.c | 5 +- fs/io_uring.c | 118 ++++++++--------- fs/jfs/inode.c | 3 +- fs/reiserfs/journal.c | 14 +++ fs/ubifs/super.c | 1 + fs/ubifs/ubifs.h | 2 + fs/ubifs/xattr.c | 44 +++++-- fs/udf/namei.c | 4 + include/linux/mfd/abx500/ux500_chargalg.h | 2 +- include/linux/netdev_features.h | 2 +- include/linux/of_mdio.h | 7 ++ include/linux/wait.h | 2 +- include/media/v4l2-subdev.h | 4 + include/net/flow_offload.h | 12 +- include/net/sctp/structs.h | 2 +- include/scsi/scsi_transport_iscsi.h | 1 + include/uapi/linux/ethtool.h | 4 +- kernel/bpf/core.c | 61 ++++++--- kernel/bpf/ringbuf.c | 2 + kernel/cpu.c | 49 ++++++++ kernel/sched/fair.c | 6 +- kernel/sched/wait.c | 9 +- kernel/trace/trace.c | 91 ++++++++------ lib/seq_buf.c | 4 +- mm/memory-failure.c | 6 +- mm/page_alloc.c | 100 +++++++++------ net/bluetooth/hci_core.c | 16 +-- net/bluetooth/hci_event.c | 6 +- net/bluetooth/l2cap_core.c | 8 +- net/bluetooth/mgmt.c | 5 + net/bridge/br_mrp.c | 6 +- net/core/dev.c | 11 +- net/ipv4/ip_output.c | 32 ++--- net/ipv4/tcp_input.c | 45 ++++--- net/ipv6/ip6_output.c | 32 ++--- net/ipv6/output_core.c | 28 +---- net/mac80211/sta_info.c | 11 +- net/sched/act_api.c | 3 +- net/sched/cls_api.c | 2 +- net/sctp/bind_addr.c | 19 +-- net/sctp/input.c | 8 +- net/sctp/ipv6.c | 7 +- net/sctp/protocol.c | 7 +- net/sctp/sm_make_chunk.c | 29 +++-- net/vmw_vsock/af_vsock.c | 2 +- net/wireless/nl80211.c | 9 +- net/wireless/wext-spy.c | 14 +-- net/xfrm/xfrm_policy.c | 21 ++-- net/xfrm/xfrm_user.c | 28 ++--- security/selinux/avc.c | 13 +- security/smack/smackfs.c | 2 + sound/soc/tegra/tegra_alc5632.c | 1 + sound/soc/tegra/tegra_max98090.c | 1 + sound/soc/tegra/tegra_rt5640.c | 1 + sound/soc/tegra/tegra_rt5677.c | 1 + sound/soc/tegra/tegra_sgtl5000.c | 1 + sound/soc/tegra/tegra_wm8753.c | 1 + sound/soc/tegra/tegra_wm8903.c | 1 + sound/soc/tegra/tegra_wm9712.c | 1 + sound/soc/tegra/trimslice.c | 1 + .../drivers/net/mlxsw/devlink_trap_l3_drops.sh | 3 + .../net/mlxsw/devlink_trap_l3_exceptions.sh | 3 + .../selftests/drivers/net/mlxsw/qos_dscp_bridge.sh | 2 + tools/testing/selftests/lkdtm/tests.txt | 2 +- .../selftests/net/forwarding/pedit_dsfield.sh | 2 + .../selftests/net/forwarding/pedit_l4port.sh | 2 + .../selftests/net/forwarding/skbedit_priority.sh | 2 + tools/testing/selftests/resctrl/README | 2 +- tools/testing/selftests/resctrl/resctrl_tests.c | 4 +- 235 files changed, 1847 insertions(+), 951 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/215 drm/mxsfb: Dont select DRM_KMS_FB_HELPER
From: Thomas Zimmermann <[email protected]>
[ Upstream commit 13b29cc3a722c2c0bc9ab9f72f9047d55d08a2f9 ]
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this.
--- drivers/gpu/drm/mxsfb/Kconfig | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/mxsfb/Kconfig +0 -1
@@ -10,7 +10,6 @@ config DRM_MXSFB depends on COMMON_CLK select DRM_MXS select DRM_KMS_HELPER - select DRM_KMS_FB_HELPER select DRM_KMS_CMA_HELPER select DRM_PANEL select DRM_PANEL_BRIDGE
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 2/215 drm/zte: Dont select DRM_KMS_FB_HELPER
In reply to Greg Kroah-HartmanFrom: Thomas Zimmermann <[email protected]>
[ Upstream commit a50e74bec1d17e95275909660c6b43ffe11ebcf0 ]
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this.
--- drivers/gpu/drm/zte/Kconfig | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/zte/Kconfig +0 -1
@@ -3,7 +3,6 @@ config DRM_ZTE tristate "DRM Support for ZTE SoCs" depends on DRM && ARCH_ZX select DRM_KMS_CMA_HELPER - select DRM_KMS_FB_HELPER select DRM_KMS_HELPER select SND_SOC_HDMI_CODEC if SND_SOC select VIDEOMODE_HELPERS
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 3/215 drm/ast: Fixed CVE for DP501
In reply to Greg Kroah-HartmanFrom: KuoHsiang Chou <[email protected]>
[ Upstream commit ba4e0339a6a33e2ba341703ce14ae8ca203cb2f1 ]
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for CVE_2019_6260 item3, and then the monitor's EDID is unable read through Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of DP501.
--- drivers/gpu/drm/ast/ast_dp501.c | 139 +++++++++++++++++++++++--------- drivers/gpu/drm/ast/ast_drv.h | 12 +++ drivers/gpu/drm/ast/ast_main.c | 10 ++- 3 files changed, 124 insertions(+), 37 deletions(-)
drivers/gpu/drm/ast/ast_dp501.c +103 -36
@@ -189,6 +189,9 @@ bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size)u32 i, data;u32 boot_address; +if (ast->config_mode != ast_use_p2a) +return false; + data =ast_mindwm (ast,0x1e6e2100 ) &0x01 ;if (data) { boot_address =get_fw_base (ast);
@@ -207,6 +210,9 @@ static bool ast_launch_m68k(struct drm_device *dev)u8 *fw_addr =NULL ;u8 jreg; +if (ast->config_mode != ast_use_p2a) +return false; + data =ast_mindwm (ast,0x1e6e2100 ) &0x01 ;if (!data) {
@@ -271,25 +277,55 @@ u8 ast_get_dp501_max_clk(struct drm_device *dev)struct ast_private *ast =to_ast_private (dev);u32 boot_address, offset, data;u8 linkcap[4 ], linkrate, linklanes, maxclk =0xff ; +u32 *plinkcap; - boot_address =get_fw_base (ast); - -/* validate FW version */ - offset =0xf000 ; - data =ast_mindwm (ast, boot_address + offset); -if ((data &0xf0 ) !=0x10 )/* version: 1x */ -return maxclk; - -/* Read Link Capability */ - offset =0xf014 ; - *(u32 *)linkcap =ast_mindwm (ast, boot_address + offset); -if (linkcap[2 ] ==0 ) { - linkrate = linkcap[0 ]; - linklanes = linkcap[1 ]; - data = (linkrate ==0x0a ) ? (90 * linklanes) : (54 * linklanes); -if (data >0xff ) - data =0xff ; - maxclk = (u8 )data; +if (ast->config_mode == ast_use_p2a) { + boot_address =get_fw_base (ast); + +/* validate FW version */ + offset =AST_DP501_GBL_VERSION ; + data =ast_mindwm (ast, boot_address + offset); +if ((data &AST_DP501_FW_VERSION_MASK ) !=AST_DP501_FW_VERSION_1 )/* version: 1x */ +return maxclk; + +/* Read Link Capability */ + offset =AST_DP501_LINKRATE ; + plinkcap = (u32 *)linkcap; + *plinkcap =ast_mindwm (ast, boot_address + offset); +if (linkcap[2 ] ==0 ) { + linkrate = linkcap[0 ]; + linklanes = linkcap[1 ]; + data = (linkrate ==0x0a ) ? (90 * linklanes) : (54 * linklanes); +if (data >0xff ) + data =0xff ; + maxclk = (u8 )data; + } + }else { +if (!ast->dp501_fw_buf) +return AST_DP501_DEFAULT_DCLK ;/* 1024x768 as default */ + +/* dummy read */ + offset =0x0000 ; + data =readl (ast->dp501_fw_buf + offset); + +/* validate FW version */ + offset =AST_DP501_GBL_VERSION ; + data =readl (ast->dp501_fw_buf + offset); +if ((data &AST_DP501_FW_VERSION_MASK ) !=AST_DP501_FW_VERSION_1 )/* version: 1x */ +return maxclk; + +/* Read Link Capability */ + offset =AST_DP501_LINKRATE ; + plinkcap = (u32 *)linkcap; + *plinkcap =readl (ast->dp501_fw_buf + offset); +if (linkcap[2 ] ==0 ) { + linkrate = linkcap[0 ]; + linklanes = linkcap[1 ]; + data = (linkrate ==0x0a ) ? (90 * linklanes) : (54 * linklanes); +if (data >0xff ) + data =0xff ; + maxclk = (u8 )data; + } }return maxclk; }
@@ -298,26 +334,57 @@ bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata) {struct ast_private *ast =to_ast_private (dev);u32 i, boot_address, offset, data; +u32 *pEDIDidx; - boot_address =get_fw_base (ast); - -/* validate FW version */ - offset =0xf000 ; - data =ast_mindwm (ast, boot_address + offset); -if ((data &0xf0 ) !=0x10 ) -return false; - -/* validate PnP Monitor */ - offset =0xf010 ; - data =ast_mindwm (ast, boot_address + offset); -if (!(data &0x01 )) -return false; +if (ast->config_mode == ast_use_p2a) { + boot_address =get_fw_base (ast); -/* Read EDID */ - offset =0xf020 ; -for (i =0 ; i <128 ; i +=4 ) { - data =ast_mindwm (ast, boot_address + offset + i); - *(u32 *)(ediddata + i) = data; +/* validate FW version */ + offset =AST_DP501_GBL_VERSION ; + data =ast_mindwm (ast, boot_address + offset); +if ((data &AST_DP501_FW_VERSION_MASK ) !=AST_DP501_FW_VERSION_1 ) +return false; + +/* validate PnP Monitor */ + offset =AST_DP501_PNPMONITOR ; + data =ast_mindwm (ast, boot_address + offset); +if (!(data &AST_DP501_PNP_CONNECTED )) +return false; + +/* Read EDID */ + offset =AST_DP501_EDID_DATA ; +for (i =0 ; i <128 ; i +=4 ) { + data =ast_mindwm (ast, boot_address + offset + i); + pEDIDidx = (u32 *)(ediddata + i); + *pEDIDidx = data; + } + }else { +if (!ast->dp501_fw_buf) +return false; + +/* dummy read */ + offset =0x0000 ; + data =readl (ast->dp501_fw_buf + offset); + +/* validate FW version */ + offset =AST_DP501_GBL_VERSION ; + data =readl (ast->dp501_fw_buf + offset); +if ((data &AST_DP501_FW_VERSION_MASK ) !=AST_DP501_FW_VERSION_1 ) +return false; + +/* validate PnP Monitor */ + offset =AST_DP501_PNPMONITOR ; + data =readl (ast->dp501_fw_buf + offset); +if (!(data &AST_DP501_PNP_CONNECTED )) +return false; + +/* Read EDID */ + offset =AST_DP501_EDID_DATA ; +for (i =0 ; i <128 ; i +=4 ) { + data =readl (ast->dp501_fw_buf + offset + i); + pEDIDidx = (u32 *)(ediddata + i); + *pEDIDidx = data; + } }return true;
drivers/gpu/drm/ast/ast_drv.h +12 -0
@@ -120,6 +120,7 @@ struct ast_private {void __iomem *regs;void __iomem *ioregs; +void __iomem *dp501_fw_buf;enum ast_chip chip;bool vga2_clone;
@@ -298,6 +299,17 @@ int ast_mode_config_init(struct ast_private *ast);#define AST_MM_ALIGN_SHIFT 4#define AST_MM_ALIGN_MASK ((1 << AST_MM_ALIGN_SHIFT) - 1) +#define AST_DP501_FW_VERSION_MASK GENMASK(7, 4) +#define AST_DP501_FW_VERSION_1 BIT(4) +#define AST_DP501_PNP_CONNECTED BIT(1) + +#define AST_DP501_DEFAULT_DCLK 65 + +#define AST_DP501_GBL_VERSION 0xf000 +#define AST_DP501_PNPMONITOR 0xf010 +#define AST_DP501_LINKRATE 0xf014 +#define AST_DP501_EDID_DATA 0xf020 +int ast_mm_init (struct ast_private *ast);/* ast post */
drivers/gpu/drm/ast/ast_main.c +9 -1
@@ -98,7 +98,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)if (!(jregd0 &0x80 ) || !(jregd1 &0x10 )) {/* Double check it's actually working */ data =ast_read32 (ast,0xf004 ); -if (data !=0xFFFFFFFF ) { +if ((data !=0xFFFFFFFF ) && (data !=0x00 )) {/* P2A works, grab silicon revision */ ast->config_mode = ast_use_p2a;
@@ -446,6 +446,14 @@ struct ast_private *ast_device_create(struct drm_driver *drv,if (ret)return ERR_PTR (ret); +/* map reserved buffer */ + ast->dp501_fw_buf =NULL ; +if (dev->vram_mm->vram_size <pci_resource_len (dev->pdev,0 )) { + ast->dp501_fw_buf =pci_iomap_range (dev->pdev,0 , dev->vram_mm->vram_size,0 ); +if (!ast->dp501_fw_buf) +drm_info (dev,"failed to map reserved buffer!\n" ); + } + ret =ast_mode_config_init (ast);if (ret)return ERR_PTR (ret);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 4/215 drm/amd/display: fix HDCP reset sequence on reinitialize
In reply to Greg Kroah-HartmanFrom: Brandon Syu <[email protected]>
[ Upstream commit 99c248c41c2199bd34232ce8e729d18c4b343b64 ]
[why]
When setup is called after hdcp has already setup, it would cause to disable HDCP flow won’t execute.
[how]
Don't clean up hdcp content to be 0.
--- drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c +0 -1
@@ -260,7 +260,6 @@ enum mod_hdcp_status mod_hdcp_setup(struct mod_hdcp *hdcp,struct mod_hdcp_output output;enum mod_hdcp_status status =MOD_HDCP_STATUS_SUCCESS ; -memset (hdcp,0 ,sizeof (struct mod_hdcp ));memset (&output,0 ,sizeof (output)); hdcp->config = *config;HDCP_TOP_INTERFACE_TRACE (hdcp);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 5/215 drm/amd/amdgpu/sriov disable all ip hw status by default
In reply to Greg Kroah-HartmanFrom: Jack Zhang <[email protected]>
[ Upstream commit 95ea3dbc4e9548d35ab6fbf67675cef8c293e2f5 ]
Disable all ip's hw status to false before any hw_init. Only set it to true until its hw_init is executed.
The old 5.9 branch has this change but somehow the 5.11 kernrel does not have this fix.
Without this change, sriov tdr have gfx IB test fail.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -1
@@ -2760,7 +2760,7 @@ static int amdgpu_device_ip_reinit_early_sriov(struct amdgpu_device *adev) AMD_IP_BLOCK_TYPE_IH, }; -for (i =0 ; i <ARRAY_SIZE (ip_order); i++) { +for (i =0 ; i < adev->num_ip_blocks; i++) {int j;struct amdgpu_ip_block *block;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 6/215 drm/vc4: fix argument ordering in vc4_crtc_get_margins()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
[ Upstream commit e590c2b03a6143ba93ddad306bc9eaafa838c020 ]
Cppcheck complains that the declaration doesn't match the function definition. Obviously "left" should come before "right". The caller and the function implementation are done this way, it's just the declaration which is wrong so this doesn't affect runtime.
--- drivers/gpu/drm/vc4/vc4_drv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_drv.h +1 -1
@@ -837,7 +837,7 @@ void vc4_crtc_destroy_state(struct drm_crtc *crtc,void vc4_crtc_reset (struct drm_crtc *crtc);void vc4_crtc_handle_vblank (struct vc4_crtc *crtc);void vc4_crtc_get_margins (struct drm_crtc_state *state, -unsigned int *right,unsigned int *left, +unsigned int *left,unsigned int *right,unsigned int *top,unsigned int *bottom);/* vc4_debugfs.c */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 7/215 drm/bridge: nwl-dsi: Force a full modeset when crtc_state->active is changed to be true
In reply to Greg Kroah-HartmanFrom: Liu Ying <[email protected]>
[ Upstream commit 3afb2a28fa2404d11cce1956a003f2aaca4da421 ]
This patch replaces ->mode_fixup() with ->atomic_check() so that a full modeset can be requested from there when crtc_state->active is changed to be true(which implies only connector's DPMS is brought out of "Off" status, though not necessarily). Bridge functions are added or changed to accommodate the ->atomic_check() callback. That full modeset is needed by the up-coming patch which gets MIPI DSI controller and PHY ready in ->mode_set(), because it makes sure ->mode_set() and ->atomic_disable() are called in pairs.
--- drivers/gpu/drm/bridge/nwl-dsi.c | 61 ++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 22 deletions(-)
drivers/gpu/drm/bridge/nwl-dsi.c +39 -22
@@ -21,6 +21,7 @@#include <linux/sys_soc.h> #include <linux/time64.h> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_of.h>
@@ -742,7 +743,9 @@ static int nwl_dsi_disable(struct nwl_dsi *dsi)return 0 ; } -static void nwl_dsi_bridge_disable (struct drm_bridge *bridge) +static void +nwl_dsi_bridge_atomic_disable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct nwl_dsi *dsi =bridge_to_dsi (bridge);int ret;
@@ -803,17 +806,6 @@ static int nwl_dsi_get_dphy_params(struct nwl_dsi *dsi,return 0 ; } -static bool nwl_dsi_bridge_mode_fixup (struct drm_bridge *bridge, -const struct drm_display_mode *mode, -struct drm_display_mode *adjusted_mode) -{ -/* At least LCDIF + NWL needs active high sync */ - adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC ); - adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC |DRM_MODE_FLAG_NVSYNC ); - -return true; -} - static enum drm_mode_status nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_info *info,
@@ -831,6 +823,24 @@ nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,return MODE_OK ; } +static int nwl_dsi_bridge_atomic_check (struct drm_bridge *bridge, +struct drm_bridge_state *bridge_state, +struct drm_crtc_state *crtc_state, +struct drm_connector_state *conn_state) +{ +struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; + +/* At least LCDIF + NWL needs active high sync */ + adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC |DRM_MODE_FLAG_PVSYNC ); + adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC |DRM_MODE_FLAG_NVSYNC ); + +/* Do a full modeset if crtc_state->active is changed to be true. */ +if (crtc_state->active_changed && crtc_state->active) + crtc_state->mode_changed = true; + +return 0 ; +} + static void nwl_dsi_bridge_mode_set(struct drm_bridge *bridge, const struct drm_display_mode *mode,
@@ -862,7 +872,9 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,drm_mode_debug_printmodeline (adjusted_mode); } -static void nwl_dsi_bridge_pre_enable (struct drm_bridge *bridge) +static void +nwl_dsi_bridge_atomic_pre_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct nwl_dsi *dsi =bridge_to_dsi (bridge);int ret;
@@ -897,7 +909,9 @@ static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge) } } -static void nwl_dsi_bridge_enable (struct drm_bridge *bridge) +static void +nwl_dsi_bridge_atomic_enable (struct drm_bridge *bridge, +struct drm_bridge_state *old_bridge_state) {struct nwl_dsi *dsi =bridge_to_dsi (bridge);int ret;
@@ -942,14 +956,17 @@ static void nwl_dsi_bridge_detach(struct drm_bridge *bridge) }static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = { - .pre_enable = nwl_dsi_bridge_pre_enable, - .enable = nwl_dsi_bridge_enable, - .disable = nwl_dsi_bridge_disable, - .mode_fixup = nwl_dsi_bridge_mode_fixup, - .mode_set = nwl_dsi_bridge_mode_set, - .mode_valid = nwl_dsi_bridge_mode_valid, - .attach = nwl_dsi_bridge_attach, - .detach = nwl_dsi_bridge_detach, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_check = nwl_dsi_bridge_atomic_check, + .atomic_pre_enable = nwl_dsi_bridge_atomic_pre_enable, + .atomic_enable = nwl_dsi_bridge_atomic_enable, + .atomic_disable = nwl_dsi_bridge_atomic_disable, + .mode_set = nwl_dsi_bridge_mode_set, + .mode_valid = nwl_dsi_bridge_mode_valid, + .attach = nwl_dsi_bridge_attach, + .detach = nwl_dsi_bridge_detach, };static int nwl_dsi_parse_dt (struct nwl_dsi *dsi)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 8/215 net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()
In reply to Greg Kroah-HartmanFrom: Andy Shevchenko <[email protected]>
[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]
Sparse is not happy about handling of strict types in pch_ptp_match():
.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
.../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi
.../pch_gbe_main.c:158:33: got restricted __be16 [usertype]
.../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
.../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo
.../pch_gbe_main.c:158:45: got restricted __be32 [usertype]
.../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
.../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid
.../pch_gbe_main.c:158:56: got restricted __be16 [usertype]
Fix that by switching to use proper accessors to BE data.
--- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +6 -13
@@ -107,7 +107,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) {u8 *data = skb->data;unsigned int offset; -u16 *hi, *id; +u16 hi, id;u32 lo;if (ptp_classify_raw (skb) ==PTP_CLASS_NONE )
@@ -118,14 +118,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)if (skb->len < offset +OFF_PTP_SEQUENCE_ID +sizeof (seqid))return 0 ; - hi = (u16 *)(data + offset +OFF_PTP_SOURCE_UUID ); - id = (u16 *)(data + offset +OFF_PTP_SEQUENCE_ID ); + hi =get_unaligned_be16 (data + offset +OFF_PTP_SOURCE_UUID +0 ); + lo =get_unaligned_be32 (data + offset +OFF_PTP_SOURCE_UUID +2 ); + id =get_unaligned_be16 (data + offset +OFF_PTP_SEQUENCE_ID ); -memcpy (&lo, &hi[1 ],sizeof (lo)); - -return (uid_hi == *hi && - uid_lo == lo && - seqid == *id); +return (uid_hi == hi && uid_lo == lo && seqid == id); } static void
@@ -135,7 +132,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)struct pci_dev *pdev;u64 ns;u32 hi, lo, val; -u16 uid, seq;if (!adapter->hwts_rx_en)return ;
@@ -151,10 +147,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb) lo =pch_src_uuid_lo_read (pdev); hi =pch_src_uuid_hi_read (pdev); - uid = hi &0xffff ; - seq = (hi >>16 ) &0xffff ; - -if (!pch_ptp_match (skb,htons (uid),htonl (lo),htons (seq))) +if (!pch_ptp_match (skb, hi, lo, hi >>16 )) goto out; ns =pch_rx_snap_read (pdev);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 9/215 drm/amd/display: fix use_max_lb flag for 420 pixel formats
In reply to Greg Kroah-HartmanFrom: Dmytro Laktyushkin <[email protected]>
[ Upstream commit 8809a7a4afe90ad9ffb42f72154d27e7c47551ae ]
Right now the flag simply selects memory config 0 when flag is true however 420 modes benefit more from memory config 3.
--- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c +6 -3
@@ -482,10 +482,13 @@ static enum lb_memory_config dpp1_dscl_find_lb_memory_config(struct dcn10_dpp *dint vtaps_c = scl_data->taps.v_taps_c;int ceil_vratio =dc_fixpt_ceil (scl_data->ratios.vert);int ceil_vratio_c =dc_fixpt_ceil (scl_data->ratios.vert_c); -enum lb_memory_config mem_cfg =LB_MEMORY_CONFIG_0 ; -if (dpp->base.ctx->dc->debug.use_max_lb) -return mem_cfg; +if (dpp->base.ctx->dc->debug.use_max_lb) { +if (scl_data->format ==PIXEL_FORMAT_420BPP8 + || scl_data->format ==PIXEL_FORMAT_420BPP10 ) +return LB_MEMORY_CONFIG_3 ; +return LB_MEMORY_CONFIG_0 ; + } dpp->base.caps->dscl_calc_lb_num_partitions ( scl_data,LB_MEMORY_CONFIG_1 , &num_part_y, &num_part_c);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 10/215 clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
In reply to Greg Kroah-HartmanFrom: Dinghao Liu <[email protected]>
[ Upstream commit a20a40a8bbc2cf4b29d7248ea31e974e9103dd7f ]
The error handling paths after pm_runtime_get_sync() have no refcount decrement, which leads to refcount leak.
--- drivers/clk/renesas/rcar-usb2-clock-sel.c | 24 ++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/clk/renesas/rcar-usb2-clock-sel.c +15 -9
@@ -128,10 +128,8 @@ static int rcar_usb2_clock_sel_resume(struct device *dev)static int rcar_usb2_clock_sel_remove (struct platform_device *pdev) {struct device *dev = &pdev->dev; -struct usb2_clock_sel_priv *priv =platform_get_drvdata (pdev);of_clk_del_provider (dev->of_node); -clk_hw_unregister (&priv->hw);pm_runtime_put (dev);pm_runtime_disable (dev);
@@ -164,9 +162,6 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)if (IS_ERR (priv->rsts))return PTR_ERR (priv->rsts); -pm_runtime_enable (dev); -pm_runtime_get_sync (dev); - clk =devm_clk_get (dev,"usb_extal" );if (!IS_ERR (clk) && !clk_prepare_enable (clk)) { priv->extal = !!clk_get_rate (clk);
@@ -183,6 +178,8 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)return -ENOENT ; } +pm_runtime_enable (dev); +pm_runtime_get_sync (dev);platform_set_drvdata (pdev, priv);dev_set_drvdata (dev, priv);
@@ -193,11 +190,20 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev) init.num_parents =0 ; priv->hw.init = &init; - clk =clk_register (NULL , &priv->hw); -if (IS_ERR (clk)) -return PTR_ERR (clk); + ret =devm_clk_hw_register (NULL , &priv->hw); +if (ret) + goto pm_put; + + ret =of_clk_add_hw_provider (np, of_clk_hw_simple_get, &priv->hw); +if (ret) + goto pm_put; + +return 0 ; -return of_clk_add_hw_provider (np, of_clk_hw_simple_get, &priv->hw); +pm_put: +pm_runtime_put (dev); +pm_runtime_disable (dev); +return ret; }static const struct dev_pm_ops rcar_usb2_clock_sel_pm_ops = {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 11/215 hugetlb: clear huge pte during flush function on mips platform
In reply to Greg Kroah-HartmanFrom: Bibo Mao <[email protected]>
[ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ]
If multiple threads are accessing the same huge page at the same time, hugetlb_cow will be called if one thread write the COW huge page. And function huge_ptep_clear_flush is called to notify other threads to clear the huge pte tlb entry. The other threads clear the huge pte tlb entry and reload it from page table, the reload huge pte entry may be old.
This patch fixes this issue on mips platform, and it clears huge pte entry before notifying other threads to flush current huge page entry, it is similar with other architectures.
--- arch/mips/include/asm/hugetlb.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
arch/mips/include/asm/hugetlb.h +7 -1
@@ -46,7 +46,13 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,static inline void huge_ptep_clear_flush (struct vm_area_struct *vma,unsigned long addr,pte_t *ptep) { -flush_tlb_page (vma, addr &huge_page_mask (hstate_vma (vma))); +/* +* clear the huge pte entry firstly, so that the other smp threads will +* not get old pte entry after finishing flush_tlb_page and before +* setting new huge pte entry +*/ +huge_ptep_get_and_clear (vma->vm_mm, addr, ptep); +flush_tlb_page (vma, addr); }#define __HAVE_ARCH_HUGE_PTE_NONE
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 12/215 atm: iphase: fix possible use-after-free in ia_module_exit()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/iphase.c +1 -1
@@ -3279,7 +3279,7 @@ static void __exit ia_module_exit(void) {pci_unregister_driver (&ia_driver); -del_timer (&ia_timer); +del_timer_sync (&ia_timer); }module_init (ia_module_init);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 13/215 mISDN: fix possible use-after-free in HFC_cleanup()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/isdn/hardware/mISDN/hfcpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/isdn/hardware/mISDN/hfcpci.c +1 -1
@@ -2342,7 +2342,7 @@ static void __exitHFC_cleanup (void) {if (timer_pending (&hfc_tl)) -del_timer (&hfc_tl); +del_timer_sync (&hfc_tl);pci_unregister_driver (&hfc_driver); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 14/215 atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
--- drivers/atm/nicstar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/nicstar.c +1 -1
@@ -297,7 +297,7 @@ static void __exit nicstar_cleanup(void) {XPRINTK ("nicstar: nicstar_cleanup() called.\n" ); -del_timer (&ns_timer); +del_timer_sync (&ns_timer);pci_unregister_driver (&nicstar_driver);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 15/215 net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
In reply to Greg Kroah-HartmanFrom: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]
__napi_schedule_irqoff() is an optimized version of __napi_schedule() which can be used where it is known that interrupts are disabled, e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer callbacks.
On PREEMPT_RT enabled kernels this assumptions is not true. Force- threaded interrupt handlers and spinlocks are not disabling interrupts and the NAPI hrtimer callback is forced into softirq context which runs with interrupts enabled as well.
Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole game so make __napi_schedule_irqoff() invoke __napi_schedule() for PREEMPT_RT kernels.
The callers of ____napi_schedule() in the networking core have been audited and are correct on PREEMPT_RT kernels as well.
--- net/core/dev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
net/core/dev.c +9 -2
@@ -6433,11 +6433,18 @@ EXPORT_SYMBOL(napi_schedule_prep);* __napi_schedule_irqoff - schedule for receive * @n: entry to schedule * -* Variant of __napi_schedule() assuming hard irqs are masked +* Variant of __napi_schedule() assuming hard irqs are masked. +* +* On PREEMPT_RT enabled kernels this maps to __napi_schedule() +* because the interrupt disabled assumption might not be true +* due to force-threaded interrupts and spinlock substitution. */ void __napi_schedule_irqoff (struct napi_struct *n) { -____napi_schedule (this_cpu_ptr (&softnet_data), n); +if (!IS_ENABLED (CONFIG_PREEMPT_RT )) +____napi_schedule (this_cpu_ptr (&softnet_data), n); +else +__napi_schedule (n); }EXPORT_SYMBOL (__napi_schedule_irqoff);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 16/215 drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()
In reply to Greg Kroah-HartmanFrom: Wang Li <[email protected]>
[ Upstream commit 69777e6ca396f0a7e1baff40fcad4a9d3d445b7a ]
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.
--- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/mediatek/mtk_drm_crtc.c +1 -1
@@ -274,7 +274,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)drm_connector_list_iter_end (&conn_iter); } - ret =pm_runtime_get_sync (crtc->dev->dev); + ret =pm_runtime_resume_and_get (crtc->dev->dev);if (ret <0 ) {DRM_ERROR ("Failed to enable power domain: %d\n" , ret);return ret;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 17/215 net: mdio: ipq8064: add regmap config to disable REGCACHE
In reply to Greg Kroah-HartmanFrom: Ansuel Smith <[email protected]>
[ Upstream commit b097bea10215315e8ee17f88b4c1bbb521b1878c ]
mdio drivers should not use REGCHACHE. Also disable locking since it's handled by the mdio users and regmap is always accessed atomically.
--- drivers/net/mdio/mdio-ipq8064.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-)
drivers/net/mdio/mdio-ipq8064.c +24 -9
@@ -10,7 +10,7 @@#include <linux/module.h> #include <linux/regmap.h> #include <linux/of_mdio.h> -#include <linux/phy.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/mfd/syscon.h>
@@ -96,14 +96,34 @@ ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)return ipq8064_mdio_wait_busy (priv); } +static const struct regmap_config ipq8064_mdio_regmap_config = { + .reg_bits =32 , + .reg_stride =4 , + .val_bits =32 , + .can_multi_write = false, +/* the mdio lock is used by any user of this mdio driver */ + .disable_locking = true, + + .cache_type =REGCACHE_NONE , +}; +static int ipq8064_mdio_probe (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node;struct ipq8064_mdio *priv; +struct resource res;struct mii_bus *bus; +void __iomem *base;int ret; +if (of_address_to_resource (np,0 , &res)) +return -ENOMEM ; + + base =ioremap (res.start,resource_size (&res)); +if (!base) +return -ENOMEM ; + bus =devm_mdiobus_alloc_size (&pdev->dev,sizeof (*priv));if (!bus)return -ENOMEM ;
@@ -115,15 +135,10 @@ ipq8064_mdio_probe(struct platform_device *pdev) bus->parent = &pdev->dev; priv = bus->priv; - priv->base =device_node_to_regmap (np); -if (IS_ERR (priv->base)) { -if (priv->base ==ERR_PTR (-EPROBE_DEFER )) -return -EPROBE_DEFER ; - -dev_err (&pdev->dev,"error getting device regmap, error=%pe\n" , - priv->base); + priv->base =devm_regmap_init_mmio (&pdev->dev, base, + &ipq8064_mdio_regmap_config); +if (IS_ERR (priv->base))return PTR_ERR (priv->base); - } ret =of_mdiobus_register (bus, np);if (ret)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 18/215 drm/bridge: lt9611: Add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 8d0b1fe81e18eb66a2d4406386760795fe0d77d9 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/gpu/drm/bridge/lontium-lt9611.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/bridge/lontium-lt9611.c +1 -0
@@ -1209,6 +1209,7 @@ static struct i2c_device_id lt9611_id[] = { { "lontium,lt9611", 0 }, {} }; +MODULE_DEVICE_TABLE (i2c, lt9611_id);static const struct of_device_id lt9611_match_table[] = { { .compatible = "lontium,lt9611" },
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 19/215 reiserfs: add check for invalid 1st journal block
In reply to Greg Kroah-HartmanFrom: Pavel Skripkin <[email protected]>
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]
syzbot reported divide error in reiserfs.
The problem was in incorrect journal 1st block.
Syzbot's reproducer manualy generated wrong superblock with incorrect 1st block. In journal_init() wasn't any checks about this particular case.
For example, if 1st journal block is before superblock 1st block, it can cause zeroing important superblock members in do_journal_end().
--- fs/reiserfs/journal.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
fs/reiserfs/journal.c +14 -0
@@ -2760,6 +2760,20 @@ int journal_init(struct super_block *sb, const char *j_dev_name, goto free_and_return; } +/* +* Sanity check to see if journal first block is correct. +* If journal first block is invalid it can cause +* zeroing important superblock members. +*/ +if (!SB_ONDISK_JOURNAL_DEVICE (sb) && +SB_ONDISK_JOURNAL_1st_BLOCK (sb) <SB_JOURNAL_1st_RESERVED_BLOCK (sb)) { +reiserfs_warning (sb,"journal-1393" , +"journal 1st super block is invalid: 1st reserved block %d, but actual 1st block is %d" , +SB_JOURNAL_1st_RESERVED_BLOCK (sb), +SB_ONDISK_JOURNAL_1st_BLOCK (sb)); + goto free_and_return; + } +if (journal_init_dev (sb, journal, j_dev_name) !=0 ) {reiserfs_warning (sb,"sh-462" ,"unable to initialize journal device" );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 20/215 drm/virtio: Fix double free on probe failure
In reply to Greg Kroah-HartmanFrom: Xie Yongji <[email protected]>
[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ]
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure. But such failure will be caught by virtio_gpu_probe() and then virtio_gpu_release() will be called to do some cleanup which will free vgdev and vgdev->vbufs again. So let's set dev->dev_private to NULL to avoid double free.
--- drivers/gpu/drm/virtio/virtgpu_kms.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/virtio/virtgpu_kms.c +1 -0
@@ -209,6 +209,7 @@ err_scanouts: err_vbufs: vgdev->vdev->config->del_vqs (vgdev->vdev); err_vqs: + dev->dev_private =NULL ;kfree (vgdev);return ret; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 21/215 net: mdio: provide shim implementation of devm_of_mdiobus_register
In reply to Greg Kroah-HartmanFrom: Vladimir Oltean <[email protected]>
[ Upstream commit 86544c3de6a2185409c5a3d02f674ea223a14217 ]
Similar to the way in which of_mdiobus_register() has a fallback to the non-DT based mdiobus_register() when CONFIG_OF is not set, we can create a shim for the device-managed devm_of_mdiobus_register() which calls devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
--- include/linux/of_mdio.h | 7 +++++++ 1 file changed, 7 insertions(+)
include/linux/of_mdio.h +7 -0
@@ -75,6 +75,13 @@ static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *return mdiobus_register (mdio); } +static inline int devm_of_mdiobus_register (struct device *dev, +struct mii_bus *mdio, +struct device_node *np) +{ +return devm_mdiobus_register (dev, mdio); +} +static inline struct mdio_device *of_mdio_find_device (struct device_node *np) {return NULL ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 22/215 net/sched: cls_api: increase max_reclassify_loop
In reply to Greg Kroah-HartmanFrom: Davide Caratti <[email protected]>
[ Upstream commit 05ff8435e50569a0a6b95e5ceaea43696e8827ab ]
modern userspace applications, like OVN, can configure the TC datapath to "recirculate" packets several times. If more than 4 "recirculation" rules are configured, packets can be dropped by __tcf_classify(). Changing the maximum number of reclassifications (from 4 to 16) should be sufficient to prevent drops in most use cases, and guard against loops at the same time.
--- net/sched/cls_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/sched/cls_api.c +1 -1
@@ -1532,7 +1532,7 @@ static inline int __tcf_classify(struct sk_buff *skb, u32 *last_executed_chain) {#ifdef CONFIG_NET_CLS_ACT -const int max_reclassify_loop =4 ; +const int max_reclassify_loop =16 ;const struct tcf_proto *first_tp;int limit =0 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 23/215 pinctrl: equilibrium: Add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Bixuan Cui <[email protected]>
[ Upstream commit d7f444499d6faf9a6ae3b27ec094109528d2b9a7 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/pinctrl/pinctrl-equilibrium.c | 1 + 1 file changed, 1 insertion(+)
drivers/pinctrl/pinctrl-equilibrium.c +1 -0
@@ -929,6 +929,7 @@ static const struct of_device_id eqbr_pinctrl_dt_match[] = { { .compatible = "intel,lgm-io" }, {} }; +MODULE_DEVICE_TABLE (of, eqbr_pinctrl_dt_match);static struct platform_driver eqbr_pinctrl_driver = { .probe = eqbr_pinctrl_probe,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 24/215 drm/scheduler: Fix hang when sched_entity released
In reply to Greg Kroah-HartmanFrom: Andrey Grodzovsky <[email protected]>
[ Upstream commit c61cdbdbffc169dc7f1e6fe94dfffaf574fe672a ]
Problem: If scheduler is already stopped by the time sched_entity is released and entity's job_queue not empty I encountred
a hang in drm_sched_entity_flush. This is because drm_sched_entity_is_idle never becomes false.
Fix: In drm_sched_fini detach all sched_entities from the scheduler's run queues. This will satisfy drm_sched_entity_is_idle. Also wakeup all those processes stuck in sched_entity flushing as the scheduler main thread which wakes them up is stopped by now.
v2:
Reverse order of drm_sched_rq_remove_entity and marking s_entity as stopped to prevent reinserion back to rq due to race.
v3:
Drop drm_sched_rq_remove_entity, only modify entity->stopped and check for it in drm_sched_entity_is_idle
--- drivers/gpu/drm/scheduler/sched_entity.c | 3 ++- drivers/gpu/drm/scheduler/sched_main.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/scheduler/sched_entity.c +2 -1
@@ -113,7 +113,8 @@ static bool drm_sched_entity_is_idle(struct drm_sched_entity *entity)rmb ();/* for list_empty to work without lock */ if (list_empty (&entity->list) || -spsc_queue_count (&entity->job_queue) ==0 ) +spsc_queue_count (&entity->job_queue) ==0 || + entity->stopped)return true;return false;
drivers/gpu/drm/scheduler/sched_main.c +24 -0
@@ -887,9 +887,33 @@ EXPORT_SYMBOL(drm_sched_init);*/ void drm_sched_fini (struct drm_gpu_scheduler *sched) { +struct drm_sched_entity *s_entity; +int i; +if (sched->thread)kthread_stop (sched->thread); +for (i =DRM_SCHED_PRIORITY_COUNT -1 ; i >=DRM_SCHED_PRIORITY_MIN ; i--) { +struct drm_sched_rq *rq = &sched->sched_rq[i]; + +if (!rq) +continue ; + +spin_lock (&rq->lock); +list_for_each_entry (s_entity, &rq->entities, list) +/* +* Prevents reinsertion and marks job_queue as idle, +* it will removed from rq in drm_sched_entity_fini +* eventually +*/ + s_entity->stopped = true; +spin_unlock (&rq->lock); + + } + +/* Wakeup everyone stuck in drm_sched_entity_flush for this scheduler */ +wake_up_all (&sched->job_scheduled); +/* Confirm no work left behind accessing device structures */ cancel_delayed_work_sync (&sched->work_tdr);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 25/215 drm/sched: Avoid data corruptions
In reply to Greg Kroah-HartmanFrom: Andrey Grodzovsky <[email protected]>
[ Upstream commit 0b10ab80695d61422337ede6ff496552d8ace99d ]
Wait for all dependencies of a job to complete before killing it to avoid data corruptions.
--- drivers/gpu/drm/scheduler/sched_entity.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/scheduler/sched_entity.c +5 -0
@@ -219,11 +219,16 @@ static void drm_sched_entity_kill_jobs_cb(struct dma_fence *f,static void drm_sched_entity_kill_jobs (struct drm_sched_entity *entity) {struct drm_sched_job *job; +struct dma_fence *f;int r;while ((job =to_drm_sched_job (spsc_queue_pop (&entity->job_queue)))) {struct drm_sched_fence *s_fence = job->s_fence; +/* Wait for all dependencies to avoid data corruptions */ +while ((f = job->sched->ops->dependency (job, entity))) +dma_fence_wait (f, false); +drm_sched_fence_scheduled (s_fence);dma_fence_set_error (&s_fence->finished, -ESRCH );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 26/215 udf: Fix NULL pointer dereference in udf_symlink function
In reply to Greg Kroah-HartmanFrom: Arturo Giusti <[email protected]>
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]
In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails.
This fix adds a check to validate the value of epos.bh.
--- fs/udf/namei.c | 4 ++++ 1 file changed, 4 insertions(+)
fs/udf/namei.c +4 -0
@@ -932,6 +932,10 @@ static int udf_symlink(struct inode *dir, struct dentry *dentry, iinfo->i_location.partitionReferenceNum, 0); epos.bh =udf_tgetblk (sb, block); +if (unlikely (!epos.bh)) { + err = -ENOMEM ; + goto out_no_entry; + }lock_buffer (epos.bh);memset (epos.bh->b_data,0x00 , bsize);set_buffer_uptodate (epos.bh);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 27/215 drm/vc4: Fix clock source for VEC PixelValve on BCM2711
In reply to Greg Kroah-HartmanFrom: Mateusz Kwiatkowski <[email protected]>
[ Upstream commit fc7a8abcee2225d6279ff785d33e24d70c738c6e ]
On the BCM2711 (Raspberry Pi 4), the VEC is actually connected to output 2 of pixelvalve3.
NOTE: This contradicts the Broadcom docs, but has been empirically tested and confirmed by Raspberry Pi firmware devs.
--- drivers/gpu/drm/vc4/vc4_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_crtc.c +1 -1
@@ -1001,7 +1001,7 @@ static const struct vc4_pv_data bcm2711_pv3_data = { .fifo_depth = 64, .pixels_per_clock = 1, .encoder_types = { - [0] = VC4_ENCODER_TYPE_VEC, + [PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC, }, };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 28/215 drm/vc4: hdmi: Fix PM reference leak in vc4_hdmi_encoder_pre_crtc_co()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 5e4322a8b266bc9f5ee7ea4895f661c01dbd7cb3 ]
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +1 -1
@@ -627,7 +627,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder)unsigned long pixel_rate, hsm_rate;int ret; - ret =pm_runtime_get_sync (&vc4_hdmi->pdev->dev); + ret =pm_runtime_resume_and_get (&vc4_hdmi->pdev->dev);if (ret <0 ) {DRM_ERROR ("Failed to retain power domain: %d\n" , ret);return ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 29/215 e100: handle eeprom as little endian
In reply to Greg Kroah-HartmanFrom: Jesse Brandeburg <[email protected]>
[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]
Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards.
Fix these by being explicit about the conversions using le16_to_cpu().
--- drivers/net/ethernet/intel/e100.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/e100.c +6 -6
@@ -1395,7 +1395,7 @@ static int e100_phy_check_without_mii(struct nic *nic)u8 phy_type;int without_mii; - phy_type = (nic->eeprom[eeprom_phy_iface] >>8 ) &0x0f ; + phy_type = (le16_to_cpu (nic->eeprom[eeprom_phy_iface]) >>8 ) &0x0f ;switch (phy_type) {case NoSuchPhy:/* Non-MII PHY; UNTESTED! */
@@ -1515,7 +1515,7 @@ static int e100_phy_init(struct nic *nic)mdio_write (netdev, nic->mii.phy_id,MII_BMCR , bmcr); }else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && (mdio_read (netdev, nic->mii.phy_id,MII_TPISTATUS ) &0x8000 ) && - (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { + (le16_to_cpu (nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {/* enable/disable MDI/MDI-X auto-switching. */ mdio_write (netdev, nic->mii.phy_id,MII_NCONFIG , nic->mii.force_media ?0 :NCONFIG_AUTO_SWITCH );
@@ -2263,9 +2263,9 @@ static int e100_asf(struct nic *nic) {/* ASF can be enabled from eeprom */ return (nic->pdev->device >=0x1050 ) && (nic->pdev->device <=0x1057 ) && - (nic->eeprom[eeprom_config_asf] & eeprom_asf) && - !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && - ((nic->eeprom[eeprom_smbus_addr] &0xFF ) !=0xFE ); + (le16_to_cpu (nic->eeprom[eeprom_config_asf]) & eeprom_asf) && + !(le16_to_cpu (nic->eeprom[eeprom_config_asf]) & eeprom_gcl) && + ((le16_to_cpu (nic->eeprom[eeprom_smbus_addr]) &0xFF ) !=0xFE ); }static int e100_up (struct nic *nic)
@@ -2920,7 +2920,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)/* Wol magic packet can be enabled from eeprom */ if ((nic->mac >= mac_82558_D101_A4) && - (nic->eeprom[eeprom_id] & eeprom_id_wol)) { + (le16_to_cpu (nic->eeprom[eeprom_id]) & eeprom_id_wol)) { nic->flags |= wol_magic;device_set_wakeup_enable (&pdev->dev, true); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 30/215 igb: handle vlan types with checker enabled
In reply to Greg Kroah-HartmanFrom: Jesse Brandeburg <[email protected]>
[ Upstream commit c7cbfb028b95360403d579c47aaaeef1ff140964 ]
The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too.
Also change the vlan_tci assignment to override the sparse warning without changing functionality.
--- drivers/net/ethernet/intel/igb/igb_main.c | 5 +++-- drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +3 -2
@@ -2643,7 +2643,8 @@ static int igb_parse_cls_flower(struct igb_adapter *adapter, } input->filter.match_flags |=IGB_FILTER_FLAG_VLAN_TCI ; - input->filter.vlan_tci = match.key->vlan_priority; + input->filter.vlan_tci = + (__force __be16 )match.key->vlan_priority; } }
@@ -8617,7 +8618,7 @@ static void igb_process_skb_fields(struct igb_ring *rx_ring,if (igb_test_staterr (rx_desc,E1000_RXDEXT_STATERR_LB ) &&test_bit (IGB_RING_FLAG_RX_LB_VLAN_BSWAP , &rx_ring->flags)) - vid =be16_to_cpu (rx_desc->wb.upper.vlan); + vid =be16_to_cpu ((__force __be16 )rx_desc->wb.upper.vlan);else vid =le16_to_cpu (rx_desc->wb.upper.vlan);
drivers/net/ethernet/intel/igbvf/netdev.c +2 -2
@@ -83,14 +83,14 @@ static int igbvf_desc_unused(struct igbvf_ring *ring)static void igbvf_receive_skb (struct igbvf_adapter *adapter,struct net_device *netdev,struct sk_buff *skb, -u32 status,u16 vlan) +u32 status,__le16 vlan) {u16 vid;if (status &E1000_RXD_STAT_VP ) {if ((adapter->flags &IGBVF_FLAG_RX_LB_VLAN_BSWAP ) && (status &E1000_RXDEXT_STATERR_LB )) - vid =be16_to_cpu (vlan) &E1000_RXD_SPC_VLAN_MASK ; + vid =be16_to_cpu ((__force __be16 )vlan) &E1000_RXD_SPC_VLAN_MASK ;else vid =le16_to_cpu (vlan) &E1000_RXD_SPC_VLAN_MASK ;if (test_bit (vid, adapter->active_vlans))
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 31/215 igb: fix assignment on big endian machines
In reply to Greg Kroah-HartmanFrom: Jesse Brandeburg <[email protected]>
[ Upstream commit b514958dd1a3bd57638b0e63b8e5152b1960e6aa ]
The igb driver was trying hard to be sparse correct, but somehow ended up converting a variable into little endian order and then tries to OR something with it.
A much plainer way of doing things is to leave all variables and OR operations in CPU (non-endian) mode, and then convert to little endian only once, which is what this change does.
This probably fixes a bug that might have been seen only on big endian systems.
--- drivers/net/ethernet/intel/igb/igb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +2 -2
@@ -6289,12 +6289,12 @@ int igb_xmit_xdp_ring(struct igb_adapter *adapter, cmd_type |= len |IGB_TXD_DCMD ; tx_desc->read.cmd_type_len =cpu_to_le32 (cmd_type); - olinfo_status =cpu_to_le32 (len <<E1000_ADVTXD_PAYLEN_SHIFT ); + olinfo_status = len <<E1000_ADVTXD_PAYLEN_SHIFT ;/* 82575 requires a unique index per ring */ if (test_bit (IGB_RING_FLAG_TX_CTX_IDX , &tx_ring->flags)) olinfo_status |= tx_ring->reg_idx <<4 ; - tx_desc->read.olinfo_status = olinfo_status; + tx_desc->read.olinfo_status =cpu_to_le32 (olinfo_status);netdev_tx_sent_queue (txring_txq (tx_ring), tx_buffer->bytecount);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 32/215 drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit 33f90f27e1c5ccd648d3e78a1c28be9ee8791cf1 ]
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.
--- drivers/gpu/drm/bridge/cdns-dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/cdns-dsi.c +1 -1
@@ -1028,7 +1028,7 @@ static ssize_t cdns_dsi_transfer(struct mipi_dsi_host *host,struct mipi_dsi_packet packet;int ret, i, tx_len, rx_len; - ret =pm_runtime_get_sync (host->dev); + ret =pm_runtime_resume_and_get (host->dev);if (ret <0 )return ret;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 33/215 clk: renesas: r8a77995: Add ZA2 clock
In reply to Greg Kroah-HartmanFrom: Kuninori Morimoto <[email protected]>
[ Upstream commit 790c06cc5df263cdaff748670cc65958c81b0951 ]
R-Car D3 ZA2 clock is from PLL0D3 or S0,
and it can be controlled by ZA2CKCR.
It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it by DEF_FIXED().
--- drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/renesas/r8a77995-cpg-mssr.c +1 -0
@@ -75,6 +75,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {DEF_RATE (".oco" ,CLK_OCO ,8 *1000 *1000 ),/* Core Clock Outputs */ +DEF_FIXED ("za2" ,R8A77995_CLK_ZA2 ,CLK_PLL0D3 ,2 ,1 ),DEF_FIXED ("z2" ,R8A77995_CLK_Z2 ,CLK_PLL0D3 ,1 ,1 ),DEF_FIXED ("ztr" ,R8A77995_CLK_ZTR ,CLK_PLL1 ,6 ,1 ), DEF_FIXED("zt", R8A77995_CLK_ZT, CLK_PLL1, 4, 1),
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 34/215 net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
In reply to Greg Kroah-HartmanFrom: Huy Nguyen <[email protected]>
[ Upstream commit c07274ab1ab2c38fb128e32643c22c89cb319384 ]
rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B register with BIT31 as IPsec marker. rep_tc_update_skb drops IPsec because it thought REG_B contains bad value.
In previous patch, BIT 31 of REG_C1 is reserved for IPsec. Skip the rep_tc_update_skb if BIT31 of REG_B is set.
--- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +4 -2
@@ -1318,7 +1318,8 @@ static void mlx5e_handle_rx_cqe_rep(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)if (rep->vlan &&skb_vlan_tag_present (skb))skb_vlan_pop (skb); -if (!mlx5e_rep_tc_update_skb (cqe, skb, &tc_priv)) { +if (unlikely (!mlx5_ipsec_is_rx_flow (cqe) && + !mlx5e_rep_tc_update_skb (cqe, skb, &tc_priv))) {dev_kfree_skb_any (skb); goto free_wqe; }
@@ -1375,7 +1376,8 @@ static void mlx5e_handle_rx_cqe_mpwrq_rep(struct mlx5e_rq *rq, struct mlx5_cqe64mlx5e_complete_rx_cqe (rq, cqe, cqe_bcnt, skb); -if (!mlx5e_rep_tc_update_skb (cqe, skb, &tc_priv)) { +if (unlikely (!mlx5_ipsec_is_rx_flow (cqe) && + !mlx5e_rep_tc_update_skb (cqe, skb, &tc_priv))) {dev_kfree_skb_any (skb); goto mpwrq_cqe_out; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 35/215 net/mlx5: Fix lag port remapping logic
In reply to Greg Kroah-HartmanFrom: Eli Cohen <[email protected]>
[ Upstream commit 8613641063617c1dfc731b403b3ee4935ef15f87 ]
Fix the logic so that if both ports netdevices are enabled or disabled, use the trivial mapping without swapping.
If only one of the netdevice's tx is enabled, use it to remap traffic to that port.
--- drivers/net/ethernet/mellanox/mlx5/core/lag.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/lag.c +13 -6
@@ -118,17 +118,24 @@ static bool __mlx5_lag_is_sriov(struct mlx5_lag *ldev)static void mlx5_infer_tx_affinity_mapping (struct lag_tracker *tracker,u8 *port1,u8 *port2) { +bool p1en; +bool p2en; + + p1en = tracker->netdev_state[MLX5_LAG_P1 ].tx_enabled && + tracker->netdev_state[MLX5_LAG_P1 ].link_up; + + p2en = tracker->netdev_state[MLX5_LAG_P2 ].tx_enabled && + tracker->netdev_state[MLX5_LAG_P2 ].link_up; + *port1 =1 ; *port2 =2 ; -if (!tracker->netdev_state[MLX5_LAG_P1 ].tx_enabled || - !tracker->netdev_state[MLX5_LAG_P1 ].link_up) { - *port1 =2 ; +if ((!p1en && !p2en) || (p1en && p2en))return ; - } -if (!tracker->netdev_state[MLX5_LAG_P2 ].tx_enabled || - !tracker->netdev_state[MLX5_LAG_P2 ].link_up) +if (p1en) *port2 =1 ; +else + *port1 =2 ; } void mlx5_modify_lag(struct mlx5_lag *ldev,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 36/215 drm: rockchip: add missing registers for RK3188
In reply to Greg Kroah-HartmanFrom: Alex Bee <[email protected]>
[ Upstream commit ab64b448a175b8a5a4bd323b8f74758c2574482c ]
Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3188's VOP.
While at that also fix .dsp_blank register which is (only) set with BIT24 (same as RK3066)
--- drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +4 -1
@@ -505,7 +505,10 @@ static const struct vop_common rk3188_common = { .dither_down_sel = VOP_REG(RK3188_DSP_CTRL0, 0x1, 27), .dither_down_en = VOP_REG(RK3188_DSP_CTRL0, 0x1, 11), .dither_down_mode = VOP_REG(RK3188_DSP_CTRL0, 0x1, 10), - .dsp_blank = VOP_REG(RK3188_DSP_CTRL1, 0x3, 24), + .dsp_blank = VOP_REG(RK3188_DSP_CTRL1, 0x1, 24), + .dither_up = VOP_REG(RK3188_DSP_CTRL0, 0x1, 9), + .dsp_lut_en = VOP_REG(RK3188_SYS_CTRL, 0x1, 28), + .data_blank = VOP_REG(RK3188_DSP_CTRL1, 0x1, 25), };static const struct vop_win_data rk3188_vop_win_data[] = {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 37/215 drm: rockchip: add missing registers for RK3066
In reply to Greg Kroah-HartmanFrom: Alex Bee <[email protected]>
[ Upstream commit 742203cd56d150eb7884eb45abb7d9dbc2bdbf04 ]
Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3066's VOP.
While at that also fix .rb_swap and .format registers for all windows, which have to be set though RK3066_SYS_CTRL1 register.
Also remove .scl from win1: Scaling is only supported on the primary plane.
--- drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +9 -7
@@ -349,8 +349,8 @@ static const struct vop_win_phy rk3066_win0_data = { .nformats = ARRAY_SIZE(formats_win_full), .format_modifiers = format_modifiers_win_full, .enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 0), - .format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 4), - .rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 19), + .format = VOP_REG(RK3066_SYS_CTRL1, 0x7, 4), + .rb_swap = VOP_REG(RK3066_SYS_CTRL1, 0x1, 19), .act_info = VOP_REG(RK3066_WIN0_ACT_INFO, 0x1fff1fff, 0), .dsp_info = VOP_REG(RK3066_WIN0_DSP_INFO, 0x0fff0fff, 0), .dsp_st = VOP_REG(RK3066_WIN0_DSP_ST, 0x1fff1fff, 0),
@@ -361,13 +361,12 @@ static const struct vop_win_phy rk3066_win0_data = { };static const struct vop_win_phy rk3066_win1_data = { - .scl = &rk3066_win_scl, .data_formats = formats_win_full, .nformats =ARRAY_SIZE (formats_win_full), .format_modifiers = format_modifiers_win_full, .enable =VOP_REG (RK3066_SYS_CTRL1 ,0x1 ,1 ), - .format =VOP_REG (RK3066_SYS_CTRL0 ,0x7 ,7 ), - .rb_swap =VOP_REG (RK3066_SYS_CTRL0 ,0x1 ,23 ), + .format =VOP_REG (RK3066_SYS_CTRL1 ,0x7 ,7 ), + .rb_swap =VOP_REG (RK3066_SYS_CTRL1 ,0x1 ,23 ), .act_info =VOP_REG (RK3066_WIN1_ACT_INFO ,0x1fff1fff ,0 ), .dsp_info =VOP_REG (RK3066_WIN1_DSP_INFO ,0x0fff0fff ,0 ), .dsp_st =VOP_REG (RK3066_WIN1_DSP_ST ,0x1fff1fff ,0 ),
@@ -382,8 +381,8 @@ static const struct vop_win_phy rk3066_win2_data = { .nformats = ARRAY_SIZE(formats_win_lite), .format_modifiers = format_modifiers_win_lite, .enable = VOP_REG(RK3066_SYS_CTRL1, 0x1, 2), - .format = VOP_REG(RK3066_SYS_CTRL0, 0x7, 10), - .rb_swap = VOP_REG(RK3066_SYS_CTRL0, 0x1, 27), + .format = VOP_REG(RK3066_SYS_CTRL1, 0x7, 10), + .rb_swap = VOP_REG(RK3066_SYS_CTRL1, 0x1, 27), .dsp_info = VOP_REG(RK3066_WIN2_DSP_INFO, 0x0fff0fff, 0), .dsp_st = VOP_REG(RK3066_WIN2_DSP_ST, 0x1fff1fff, 0), .yrgb_mst = VOP_REG(RK3066_WIN2_MST, 0xffffffff, 0),
@@ -408,6 +407,9 @@ static const struct vop_common rk3066_common = { .dither_down_en = VOP_REG(RK3066_DSP_CTRL0, 0x1, 11), .dither_down_mode = VOP_REG(RK3066_DSP_CTRL0, 0x1, 10), .dsp_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 24), + .dither_up = VOP_REG(RK3066_DSP_CTRL0, 0x1, 9), + .dsp_lut_en = VOP_REG(RK3066_SYS_CTRL1, 0x1, 31), + .data_blank = VOP_REG(RK3066_DSP_CTRL1, 0x1, 25), };static const struct vop_win_data rk3066_vop_win_data[] = {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 38/215 net: stmmac: the XPCS obscures a potential "PHY not found" error
In reply to Greg Kroah-HartmanFrom: Vladimir Oltean <[email protected]>
[ Upstream commit 4751d2aa321f2828d8c5d2f7ce4ed18a01e47f46 ]
stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and assign them IRQ lines, as well as to set priv->plat->phy_addr.
If no PHY is found, the "found" variable remains set to 0 and the function errors out.
After the introduction of commit f213bbe8a9d6 ("net: stmmac: Integrate it with DesignWare XPCS"), the "found" variable was immediately reused for searching for a PCS on the same MDIO bus.
This can result in 2 types of potential problems (none of them seems to be seen on the only Intel system that sets has_xpcs = true, otherwise it would have been reported):
1. If a PCS is found but a PHY is not, then the code happily exits with no error. One might say "yes, but this is not possible, because of_mdiobus_register will probe a PHY for all MDIO addresses, including for the XPCS, so if an XPCS exists, then a PHY certainly exists too". Well, that is not true, see intel_mgbe_common_data():
/* Ensure mdio bus scan skips intel serdes and pcs-xpcs */ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR; plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;
2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in that case, the error message will be "No PHY found". Confusing.
--- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 21 +++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +15 -6
@@ -441,6 +441,12 @@ int stmmac_mdio_register(struct net_device *ndev) found =1 ; } +if (!found && !mdio_node) { +dev_warn (dev,"No PHY found\n" ); + err = -ENODEV ; + goto no_phy_found; + } +/* Try to probe the XPCS by scanning all addresses. */ if (priv->hw->xpcs) {struct mdio_xpcs_args *xpcs = &priv->hw->xpcs_args;
@@ -449,6 +455,7 @@ int stmmac_mdio_register(struct net_device *ndev) xpcs->bus = new_bus; + found =0 ;for (addr =0 ; addr < max_addr; addr++) { xpcs->addr = addr;
@@ -458,13 +465,12 @@ int stmmac_mdio_register(struct net_device *ndev)break ; } } - } -if (!found && !mdio_node) { -dev_warn (dev,"No PHY found\n" ); -mdiobus_unregister (new_bus); -mdiobus_free (new_bus); -return -ENODEV ; +if (!found && !mdio_node) { +dev_warn (dev,"No XPCS found\n" ); + err = -ENODEV ; + goto no_xpcs_found; + } } bus_register_done:
@@ -472,6 +478,9 @@ bus_register_done:return 0 ; +no_xpcs_found: +no_phy_found: +mdiobus_unregister (new_bus); bus_register_fail:mdiobus_free (new_bus);return err;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 39/215 RDMA/rtrs: Change MAX_SESS_QUEUE_DEPTH
In reply to Greg Kroah-HartmanFrom: Gioh Kim <[email protected]>
[ Upstream commit 3a98ea7041b7d18ac356da64823c2ba2f8391b3e ]
Max IB immediate data size is 2^28 (MAX_IMM_PAYL_BITS) and the minimum chunk size is 4096 (2^12). Therefore the maximum sess_queue_depth is 65536 (2^16).
--- drivers/infiniband/ulp/rtrs/rtrs-pri.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/infiniband/ulp/rtrs/rtrs-pri.h +8 -5
@@ -47,12 +47,15 @@ enum {MAX_PATHS_NUM =128 ,/* -* With the size of struct rtrs_permit allocated on the client, 4K -* is the maximum number of rtrs_permits we can allocate. This number is -* also used on the client to allocate the IU for the user connection -* to receive the RDMA addresses from the server. +* Max IB immediate data size is 2^28 (MAX_IMM_PAYL_BITS) +* and the minimum chunk size is 4096 (2^12). +* So the maximum sess_queue_depth is 65536 (2^16) in theory. +* But mempool_create, create_qp and ib_post_send fail with +* "cannot allocate memory" error if sess_queue_depth is too big. +* Therefore the pratical max value of sess_queue_depth is +* somewhere between 1 and 65536 and it depends on the system. */ -MAX_SESS_QUEUE_DEPTH =4096 , +MAX_SESS_QUEUE_DEPTH =65536 ,RTRS_HB_INTERVAL_MS =5000 , RTRS_HB_MISSED_MAX = 5,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 40/215 clk: tegra: Fix refcounting of gate clocks
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
[ Upstream commit c592c8a28f5821e880ac6675781cd8a151b0737c ]
The refcounting of the gate clocks has a bug causing the enable_refcnt to underflow when unused clocks are disabled. This happens because clk provider erroneously bumps the refcount if clock is enabled at a boot time, which it shouldn't be doing, and it does this only for the gate clocks, while peripheral clocks are using the same gate ops and the peripheral clocks are missing the initial bump. Hence the refcount of the peripheral clocks is 0 when unused clocks are disabled and then the counter is decremented further by the gate ops, causing the integer underflow.
Fix this problem by removing the erroneous bump and by implementing the disable_unused() callback, which disables the unused gates properly.
The visible effect of the bug is such that the unused clocks are never gated if a loaded kernel module grabs the unused clocks and starts to use them. In practice this shouldn't cause any real problems for the drivers and boards supported by the kernel today.
--- drivers/clk/tegra/clk-periph-gate.c | 72 +++++++++++++++++++---------- drivers/clk/tegra/clk-periph.c | 11 +++++ 2 files changed, 58 insertions(+), 25 deletions(-)
drivers/clk/tegra/clk-periph-gate.c +47 -25
@@ -48,18 +48,9 @@ static int clk_periph_is_enabled(struct clk_hw *hw)return state; } -static int clk_periph_enable (struct clk_hw *hw) +static void clk_periph_enable_locked (struct clk_hw *hw) {struct tegra_clk_periph_gate *gate =to_clk_periph_gate (hw); -unsigned long flags =0 ; - -spin_lock_irqsave (&periph_ref_lock, flags); - - gate->enable_refcnt[gate->clk_num]++; -if (gate->enable_refcnt[gate->clk_num] >1 ) { -spin_unlock_irqrestore (&periph_ref_lock, flags); -return 0 ; - }write_enb_set (periph_clk_to_bit (gate), gate);udelay (2 );
@@ -78,6 +69,32 @@ static int clk_periph_enable(struct clk_hw *hw)udelay (1 );writel_relaxed (0 , gate->clk_base +LVL2_CLK_GATE_OVRE ); } +} + +static void clk_periph_disable_locked (struct clk_hw *hw) +{ +struct tegra_clk_periph_gate *gate =to_clk_periph_gate (hw); + +/* +* If peripheral is in the APB bus then read the APB bus to +* flush the write operation in apb bus. This will avoid the +* peripheral access after disabling clock +*/ +if (gate->flags &TEGRA_PERIPH_ON_APB ) +tegra_read_chipid (); + +write_enb_clr (periph_clk_to_bit (gate), gate); +} + +static int clk_periph_enable (struct clk_hw *hw) +{ +struct tegra_clk_periph_gate *gate =to_clk_periph_gate (hw); +unsigned long flags =0 ; + +spin_lock_irqsave (&periph_ref_lock, flags); + +if (!gate->enable_refcnt[gate->clk_num]++) +clk_periph_enable_locked (hw);spin_unlock_irqrestore (&periph_ref_lock, flags);
@@ -91,21 +108,28 @@ static void clk_periph_disable(struct clk_hw *hw)spin_lock_irqsave (&periph_ref_lock, flags); - gate->enable_refcnt[gate->clk_num]--; -if (gate->enable_refcnt[gate->clk_num] >0 ) { -spin_unlock_irqrestore (&periph_ref_lock, flags); -return ; - } +WARN_ON (!gate->enable_refcnt[gate->clk_num]); + +if (--gate->enable_refcnt[gate->clk_num] ==0 ) +clk_periph_disable_locked (hw); + +spin_unlock_irqrestore (&periph_ref_lock, flags); +} + +static void clk_periph_disable_unused (struct clk_hw *hw) +{ +struct tegra_clk_periph_gate *gate =to_clk_periph_gate (hw); +unsigned long flags =0 ; + +spin_lock_irqsave (&periph_ref_lock, flags);/* -* If peripheral is in the APB bus then read the APB bus to -* flush the write operation in apb bus. This will avoid the -* peripheral access after disabling clock +* Some clocks are duplicated and some of them are marked as critical, +* like fuse and fuse_burn for example, thus the enable_refcnt will +* be non-zero here if the "unused" duplicate is disabled by CCF. */ -if (gate->flags &TEGRA_PERIPH_ON_APB ) -tegra_read_chipid (); - -write_enb_clr (periph_clk_to_bit (gate), gate); +if (!gate->enable_refcnt[gate->clk_num]) +clk_periph_disable_locked (hw);spin_unlock_irqrestore (&periph_ref_lock, flags); }
@@ -114,6 +138,7 @@ const struct clk_ops tegra_clk_periph_gate_ops = { .is_enabled = clk_periph_is_enabled, .enable = clk_periph_enable, .disable = clk_periph_disable, + .disable_unused = clk_periph_disable_unused, }; struct clk *tegra_clk_register_periph_gate(const char *name,
@@ -148,9 +173,6 @@ struct clk *tegra_clk_register_periph_gate(const char *name, gate->enable_refcnt = enable_refcnt; gate->regs = pregs; -if (read_enb (gate) &periph_clk_to_bit (gate)) - enable_refcnt[clk_num]++; -/* Data in .init is copied by clk_register(), so stack variable OK */ gate->hw.init = &init;
drivers/clk/tegra/clk-periph.c +11 -0
@@ -100,6 +100,15 @@ static void clk_periph_disable(struct clk_hw *hw) gate_ops->disable (gate_hw); } +static void clk_periph_disable_unused (struct clk_hw *hw) +{ +struct tegra_clk_periph *periph =to_clk_periph (hw); +const struct clk_ops *gate_ops = periph->gate_ops; +struct clk_hw *gate_hw = &periph->gate.hw; + + gate_ops->disable_unused (gate_hw); +} +static void clk_periph_restore_context (struct clk_hw *hw) {struct tegra_clk_periph *periph =to_clk_periph (hw);
@@ -126,6 +135,7 @@ const struct clk_ops tegra_clk_periph_ops = { .is_enabled = clk_periph_is_enabled, .enable = clk_periph_enable, .disable = clk_periph_disable, + .disable_unused = clk_periph_disable_unused, .restore_context = clk_periph_restore_context, };
@@ -135,6 +145,7 @@ static const struct clk_ops tegra_clk_periph_nodiv_ops = { .is_enabled = clk_periph_is_enabled, .enable = clk_periph_enable, .disable = clk_periph_disable, + .disable_unused = clk_periph_disable_unused, .restore_context = clk_periph_restore_context, };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 41/215 clk: tegra: Ensure that PLLU configuration is applied properly
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
[ Upstream commit a7196048cd5168096c2c4f44a3939d7a6dcd06b9 ]
The PLLU (USB) consists of the PLL configuration itself and configuration of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114, where T114 immediately bails out if PLLU is enabled and T30 re-enables a potentially already enabled PLL (left after bootloader) and then fully reprograms it, which could be unsafe to do. The correct way should be to skip enabling of the PLL if it's already enabled and then apply configuration to the outputs. This patch doesn't fix any known problems, it's a minor improvement.
--- drivers/clk/tegra/clk-pll.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/clk/tegra/clk-pll.c +4 -5
@@ -1131,7 +1131,8 @@ static int clk_pllu_enable(struct clk_hw *hw)if (pll->lock)spin_lock_irqsave (pll->lock, flags); -_clk_pll_enable (hw); +if (!clk_pll_is_enabled (hw)) +_clk_pll_enable (hw); ret =clk_pll_wait_for_lock (pll);if (ret <0 )
@@ -1748,15 +1749,13 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw)return -EINVAL ; } -if (clk_pll_is_enabled (hw)) -return 0 ; - input_rate =clk_hw_get_rate (__clk_get_hw (osc));if (pll->lock)spin_lock_irqsave (pll->lock, flags); -_clk_pll_enable (hw); +if (!clk_pll_is_enabled (hw)) +_clk_pll_enable (hw); ret =clk_pll_wait_for_lock (pll);if (ret <0 )
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 42/215 drm: bridge: cdns-mhdp8546: Fix PM reference leak in
In reply to Greg Kroah-HartmanFrom: Yu Kuai <[email protected]>
[ Upstream commit f674555ee5444c8987dfea0922f1cf6bf0c12847 ]
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.
--- drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c +2 -2
@@ -2369,9 +2369,9 @@ static int cdns_mhdp_probe(struct platform_device *pdev)clk_prepare_enable (clk);pm_runtime_enable (dev); - ret =pm_runtime_get_sync (dev); + ret =pm_runtime_resume_and_get (dev);if (ret <0 ) { -dev_err (dev,"pm_runtime_get_sync failed\n" ); +dev_err (dev,"pm_runtime_resume_and_get failed\n" );pm_runtime_disable (dev); goto clk_disable; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 43/215 virtio-net: Add validation for used length
In reply to Greg Kroah-HartmanFrom: Xie Yongji <[email protected]>
[ Upstream commit ad993a95c508417acdeb15244109e009e50d8758 ]
This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss.
--- drivers/net/virtio_net.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
drivers/net/virtio_net.c +13 -7
@@ -660,6 +660,12 @@ static struct sk_buff *receive_small(struct net_device *dev, len -= vi->hdr_len; stats->bytes += len; +if (unlikely (len >GOOD_PACKET_LEN )) { +pr_debug ("%s: rx error: len %u exceeds max size %d\n" , + dev->name, len,GOOD_PACKET_LEN ); + dev->stats.rx_length_errors++; + goto err_len; + }rcu_read_lock (); xdp_prog =rcu_dereference (rq->xdp_prog);if (xdp_prog) {
@@ -763,6 +769,7 @@ err: err_xdp:rcu_read_unlock (); stats->xdp_drops++; +err_len: stats->drops++;put_page (page); xdp_xmit:
@@ -816,6 +823,12 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, head_skb =NULL ; stats->bytes += len - vi->hdr_len; +if (unlikely (len > truesize)) { +pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , + dev->name, len, (unsigned long )ctx); + dev->stats.rx_length_errors++; + goto err_skb; + }rcu_read_lock (); xdp_prog =rcu_dereference (rq->xdp_prog);if (xdp_prog) {
@@ -943,13 +956,6 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, }rcu_read_unlock (); -if (unlikely (len > truesize)) { -pr_debug ("%s: rx error: len %u exceeds truesize %lu\n" , - dev->name, len, (unsigned long )ctx); - dev->stats.rx_length_errors++; - goto err_skb; - } - head_skb =page_to_skb (vi, rq, page, offset, len, truesize, !xdp_prog, metasize); curr_skb = head_skb;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 44/215 ipv6: use prandom_u32() for ID generation
In reply to Greg Kroah-HartmanFrom: Willy Tarreau <[email protected]>
[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]
This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6.
Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability.
Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it.
Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters.
The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes.
--- net/ipv6/output_core.c | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-)
net/ipv6/output_core.c +5 -23
@@ -15,29 +15,11 @@ static u32 __ipv6_select_ident(struct net *net,const struct in6_addr *dst, const struct in6_addr *src) { -const struct { -struct in6_addr dst; -struct in6_addr src; - }__aligned(SIPHASH_ALIGNMENT) combined = { - .dst = *dst, - .src = *src, - }; -u32 hash, id; - -/* Note the following code is not safe, but this is okay. */ -if (unlikely (siphash_key_is_zero (&net->ipv4.ip_id_key))) -get_random_bytes (&net->ipv4.ip_id_key, -sizeof (net->ipv4.ip_id_key)); - - hash =siphash (&combined,sizeof (combined), &net->ipv4.ip_id_key); - -/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve, -* set the hight order instead thus minimizing possible future -* collisions. -*/ - id =ip_idents_reserve (hash,1 ); -if (unlikely (!id)) - id =1 <<31 ; + u32 id; + +do { + id =prandom_u32 (); + }while (!id);return id; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 45/215 MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
In reply to Greg Kroah-HartmanFrom: Paul Cercueil <[email protected]>
[ Upstream commit fc52f92a653215fbd6bc522ac5311857b335e589 ]
Ingenic JZ4760 and JZ4760B do have a FPU, but the config registers don't report it. Force the FPU detection in case the processor ID match the JZ4760(B) one.
--- arch/mips/kernel/cpu-probe.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/mips/kernel/cpu-probe.c +5 -0
@@ -1827,6 +1827,11 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)*/ case PRID_COMP_INGENIC_D0 : c->isa_level &= ~MIPS_CPU_ISA_M32R2 ; + +/* FPU is not properly detected on JZ4760(B). */ +if (c->processor_id ==0x2ed0024f ) + c->options |=MIPS_CPU_FPU ; + fallthrough;/*
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 46/215 MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
In reply to Greg Kroah-HartmanFrom: Paul Cercueil <[email protected]>
[ Upstream commit eb3849370ae32b571e1f9a63ba52c61adeaf88f7 ]
The clock driving the XBurst CPUs in Ingenic SoCs is integer divided from the main PLL. As such, it is possible to control the frequency of the CPU, either by changing the divider, or by changing the rate of the main PLL.
The XBurst CPUs also lack the CP0 timer; the TCU, a separate piece of hardware in the SoC, provides this functionality.
--- arch/mips/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/mips/Kconfig +2 -0
@@ -418,6 +418,8 @@ config MACH_INGENIC_SOC select MIPS_GENERIC select MACH_INGENIC select SYS_SUPPORTS_ZBOOT_UART16550 + select CPU_SUPPORTS_CPUFREQ + select MIPS_EXTERNAL_TIMER config LANTIQ bool "Lantiq based platforms"
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 47/215 drm/amd/display: Avoid HDCP over-read and corruption
In reply to Greg Kroah-HartmanFrom: Kees Cook <[email protected]>
[ Upstream commit 06888d571b513cbfc0b41949948def6cb81021b2 ]
Instead of reading the desired 5 bytes of the actual target field, the code was reading 8. This could result in a corrupted value if the trailing 3 bytes were non-zero, so instead use an appropriately sized and zero-initialized bounce buffer, and read only 5 bytes before casting to u64.
--- drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c +3 -1
@@ -29,8 +29,10 @@ static inline enum mod_hdcp_status validate_bksv(struct mod_hdcp *hdcp) {uint64_t n =0 ;uint8_t count =0 ; +u8 bksv[sizeof (n)] = { }; -memcpy (&n, hdcp->auth.msg.hdcp1.bksv,sizeof (uint64_t )); +memcpy (bksv, hdcp->auth.msg.hdcp1.bksv,sizeof (hdcp->auth.msg.hdcp1.bksv)); + n = *(uint64_t *)bksv;while (n) { count++;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 48/215 drm/amdgpu: remove unsafe optimization to drop preamble ib
In reply to Greg Kroah-HartmanFrom: Jiansong Chen <[email protected]>
[ Upstream commit 7d9c70d23550eb86a1bec1954ccaa8d6ec3a3328 ]
Take the situation with gfxoff, the optimization may cause corrupt CE ram contents. In addition emit_cntxcntl callback has similar optimization which firmware can handle properly even for power feature.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c +1 -10
@@ -128,7 +128,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,struct amdgpu_device *adev = ring->adev;struct amdgpu_ib *ib = &ibs[0 ];struct dma_fence *tmp =NULL ; -bool skip_preamble, need_ctx_switch; +bool need_ctx_switch;unsigned patch_offset = ~0 ;struct amdgpu_vm *vm;uint64_t fence_ctx;
@@ -221,7 +221,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,if (need_ctx_switch) status |=AMDGPU_HAVE_CTX_SWITCH ; - skip_preamble = ring->current_ctx == fence_ctx;if (job && ring->funcs->emit_cntxcntl) { status |= job->preamble_status; status |= job->preemption_status;
@@ -239,14 +238,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,for (i =0 ; i < num_ibs; ++i) { ib = &ibs[i]; -/* drop preamble IBs if we don't have a context switch */ -if ((ib->flags &AMDGPU_IB_FLAG_PREAMBLE ) && - skip_preamble && - !(status &AMDGPU_PREAMBLE_IB_PRESENT_FIRST ) && - !amdgpu_mcbp && - !amdgpu_sriov_vf (adev))/* for SRIOV preemption, Preamble CE ib must be inserted anyway */ -continue ; -if (job && ring->funcs->emit_frame_cntl) {if (secure != !!(ib->flags &AMDGPU_IB_FLAGS_SECURE )) {amdgpu_ring_emit_frame_cntl (ring, false, secure);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 49/215 net: tcp better handling of reordering then loss cases
In reply to Greg Kroah-HartmanFrom: Yuchung Cheng <[email protected]>
[ Upstream commit a29cb6914681a55667436a9eb7a42e28da8cf387 ]
This patch aims to improve the situation when reordering and loss are ocurring in the same flight of packets.
Previously the reordering would first induce a spurious recovery, then the subsequent ACK may undo the cwnd (based on the timestamps e.g.). However the current loss recovery does not proceed to invoke RACK to install a reordering timer. If some packets are also lost, this may lead to a long RTO-based recovery. An example is
https://groups.google.com/g/bbr-dev/c/OFHADvJbTEI
The solution is to after reverting the recovery, always invoke RACK to either mount the RACK timer to fast retransmit after the reordering window, or restarts the recovery if new loss is identified. Hence it is possible the sender may go from Recovery to Disorder/Open to Recovery again in one ACK.
--- net/ipv4/tcp_input.c | 45 +++++++++++++++++++++++++------------------- 1 file changed, 26 insertions(+), 19 deletions(-)
net/ipv4/tcp_input.c +26 -19
@@ -2802,8 +2802,17 @@ static void tcp_process_loss(struct sock *sk, int flag, int num_dupack, *rexmit =REXMIT_LOST ; } +static bool tcp_force_fast_retransmit (struct sock *sk) +{ +struct tcp_sock *tp =tcp_sk (sk); + +return after (tcp_highest_sack_seq (tp), + tp->snd_una + tp->reordering * tp->mss_cache); +} +/* Undo during fast recovery after partial ACK. */ -static bool tcp_try_undo_partial (struct sock *sk,u32 prior_snd_una) +static bool tcp_try_undo_partial (struct sock *sk,u32 prior_snd_una, +bool *do_lost) {struct tcp_sock *tp =tcp_sk (sk);
@@ -2828,7 +2837,9 @@ static bool tcp_try_undo_partial(struct sock *sk, u32 prior_snd_una)tcp_undo_cwnd_reduction (sk, true);NET_INC_STATS (sock_net (sk),LINUX_MIB_TCPPARTIALUNDO );tcp_try_keep_open (sk); -return true; + }else { +/* Partial ACK arrived. Force fast retransmit. */ + *do_lost =tcp_force_fast_retransmit (sk); }return false; }
@@ -2852,14 +2863,6 @@ static void tcp_identify_packet_loss(struct sock *sk, int *ack_flag) } } -static bool tcp_force_fast_retransmit (struct sock *sk) -{ -struct tcp_sock *tp =tcp_sk (sk); - -return after (tcp_highest_sack_seq (tp), - tp->snd_una + tp->reordering * tp->mss_cache); -} -/* Process an event, which can update packets-in-flight not trivially. * Main goal of this function is to calculate new estimate for left_out, * taking into account both packets sitting in receiver's buffer and
@@ -2929,17 +2932,21 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una,if (!(flag &FLAG_SND_UNA_ADVANCED )) {if (tcp_is_reno (tp))tcp_add_reno_sack (sk, num_dupack, ece_ack); - }else { -if (tcp_try_undo_partial (sk, prior_snd_una)) -return ; -/* Partial ACK arrived. Force fast retransmit. */ - do_lost =tcp_force_fast_retransmit (sk); - } -if (tcp_try_undo_dsack (sk)) { -tcp_try_keep_open (sk); + }else if (tcp_try_undo_partial (sk, prior_snd_una, &do_lost))return ; - } + +if (tcp_try_undo_dsack (sk)) +tcp_try_keep_open (sk); +tcp_identify_packet_loss (sk, ack_flag); +if (icsk->icsk_ca_state != TCP_CA_Recovery) { +if (!tcp_time_to_recover (sk, flag)) +return ; +/* Undo reverts the recovery state. If loss is evident, +* starts a new recovery (e.g. reordering then loss); +*/ +tcp_enter_recovery (sk, ece_ack); + }break ;case TCP_CA_Loss:tcp_process_loss (sk, flag, num_dupack, rexmit);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 50/215 RDMA/cxgb4: Fix missing error code in create_qp()
In reply to Greg Kroah-HartmanFrom: Jiapeng Chong <[email protected]>
[ Upstream commit aeb27bb76ad8197eb47890b1ff470d5faf8ec9a5 ]
The error code is missing in this code scenario so 0 will be returned. Add the error code '-EINVAL' to the return value 'ret'.
Eliminates the follow smatch warning:
drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'.
--- drivers/infiniband/hw/cxgb4/qp.c | 1 + 1 file changed, 1 insertion(+)
drivers/infiniband/hw/cxgb4/qp.c +1 -0
@@ -295,6 +295,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,if (user && (!wq->sq.bar2_pa || (need_rq && !wq->rq.bar2_pa))) {pr_warn ("%s: sqid %u or rqid %u not in BAR2 range\n" ,pci_name (rdev->lldi.pdev), wq->sq.qid, wq->rq.qid); + ret = -EINVAL ; goto free_dma; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 51/215 dm space maps: dont reset space map allocation cursor when committing
In reply to Greg Kroah-HartmanFrom: Joe Thornber <[email protected]>
[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ]
Current commit code resets the place where the search for free blocks will begin back to the start of the metadata device. There are a couple of repercussions to this:
- The first allocation after the commit is likely to take longer than normal as it searches for a free block in an area that is likely to have very few free blocks (if any).
- Any free blocks it finds will have been recently freed. Reusing them means we have fewer old copies of the metadata to aid recovery from hardware error.
Fix these issues by leaving the cursor alone, only resetting when the search hits the end of the metadata device.
--- drivers/md/persistent-data/dm-space-map-disk.c | 9 ++++++++- drivers/md/persistent-data/dm-space-map-metadata.c | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)
drivers/md/persistent-data/dm-space-map-disk.c +8 -1
@@ -171,6 +171,14 @@ static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)* Any block we allocate has to be free in both the old and current ll. */ r =sm_ll_find_common_free_block (&smd->old_ll, &smd->ll, smd->begin, smd->ll.nr_blocks, b); +if (r == -ENOSPC ) { +/* +* There's no free block between smd->begin and the end of the metadata device. +* We search before smd->begin in case something has been freed. +*/ + r =sm_ll_find_common_free_block (&smd->old_ll, &smd->ll,0 , smd->begin, b); + } +if (r)return r;
@@ -199,7 +207,6 @@ static int sm_disk_commit(struct dm_space_map *sm)return r;memcpy (&smd->old_ll, &smd->ll,sizeof (smd->old_ll)); - smd->begin =0 ; smd->nr_allocated_this_transaction =0 ; r =sm_disk_get_nr_free (sm, &nr_free);
drivers/md/persistent-data/dm-space-map-metadata.c +8 -1
@@ -452,6 +452,14 @@ static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b)* Any block we allocate has to be free in both the old and current ll. */ r =sm_ll_find_common_free_block (&smm->old_ll, &smm->ll, smm->begin, smm->ll.nr_blocks, b); +if (r == -ENOSPC ) { +/* +* There's no free block between smm->begin and the end of the metadata device. +* We search before smm->begin in case something has been freed. +*/ + r =sm_ll_find_common_free_block (&smm->old_ll, &smm->ll,0 , smm->begin, b); + } +if (r)return r;
@@ -503,7 +511,6 @@ static int sm_metadata_commit(struct dm_space_map *sm)return r;memcpy (&smm->old_ll, &smm->ll,sizeof (smm->old_ll)); - smm->begin =0 ; smm->allocated_this_transaction =0 ;return 0 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 52/215 dm writecache: dont split bios when overwriting contiguous cache content
In reply to Greg Kroah-HartmanFrom: Mikulas Patocka <[email protected]>
[ Upstream commit ee50cc19d80e9b9a8283d1fb517a778faf2f6899 ]
If dm-writecache overwrites existing cached data, it splits the incoming bio into many block-sized bios. The I/O scheduler does merge these bios into one large request but this needless splitting and merging causes performance degradation.
Fix this by avoiding bio splitting if the cache target area that is being overwritten is contiguous.
--- drivers/md/dm-writecache.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-)
drivers/md/dm-writecache.c +30 -8
@@ -1360,14 +1360,18 @@ read_next_block: }else { do { bool found_entry = false; + bool search_used = false; if (writecache_has_error(wc)) goto unlock_error; e = writecache_find_entry(wc, bio->bi_iter.bi_sector, 0); if (e) { - if (!writecache_entry_is_committed(wc, e)) + if (!writecache_entry_is_committed(wc, e)) { + search_used = true; goto bio_copy; + } if (!WC_MODE_PMEM(wc) && !e->write_in_progress) { wc->overwrote_committed = true; + search_used = true; goto bio_copy; } found_entry = true;
@@ -1404,13 +1408,31 @@ bio_copy:sector_t current_cache_sec = start_cache_sec + (bio_size >>SECTOR_SHIFT );while (bio_size < bio->bi_iter.bi_size) { -struct wc_entry *f =writecache_pop_from_freelist (wc, current_cache_sec); -if (!f) -break ; -write_original_sector_seq_count (wc, f, bio->bi_iter.bi_sector + - (bio_size >>SECTOR_SHIFT ), wc->seq_count); -writecache_insert_entry (wc, f); - wc->uncommitted_blocks++; +if (!search_used) { +struct wc_entry *f =writecache_pop_from_freelist (wc, current_cache_sec); +if (!f) +break ; +write_original_sector_seq_count (wc, f, bio->bi_iter.bi_sector + + (bio_size >>SECTOR_SHIFT ), wc->seq_count); +writecache_insert_entry (wc, f); + wc->uncommitted_blocks++; + }else { +struct wc_entry *f; +struct rb_node *next =rb_next (&e->rb_node); +if (!next) +break ; + f = container_of(next, struct wc_entry, rb_node); +if (f != e +1 ) +break ; +if (read_original_sector (wc, f) != +read_original_sector (wc, e) + (wc->block_size >>SECTOR_SHIFT )) +break ; +if (unlikely (f->write_in_progress)) +break ; +if (writecache_entry_is_committed (wc, f)) + wc->overwrote_committed = true; + e = f; + } bio_size += wc->block_size; current_cache_sec += wc->block_size >>SECTOR_SHIFT ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 53/215 dm: Fix dm_accept_partial_bio() relative to zone management commands
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit 6842d264aa5205da338b6dcc6acfa2a6732558f1 ]
Fix dm_accept_partial_bio() to actually check that zone management commands are not passed as explained in the function documentation comment. Also, since a zone append operation cannot be split, add REQ_OP_ZONE_APPEND as a forbidden command.
White lines are added around the group of BUG_ON() calls to make the code more legible.
--- drivers/md/dm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/md/dm.c +6 -2
@@ -1230,8 +1230,8 @@ static int dm_dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,/* * A target may call dm_accept_partial_bio only from the map routine. It is -* allowed for all bio types except REQ_PREFLUSH, REQ_OP_ZONE_RESET, -* REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH. +* allowed for all bio types except REQ_PREFLUSH, REQ_OP_ZONE_* zone management +* operations and REQ_OP_ZONE_APPEND (zone append writes). * * dm_accept_partial_bio informs the dm that the target only wants to process * additional n_sectors sectors of the bio and the rest of the data should be
@@ -1261,9 +1261,13 @@ void dm_accept_partial_bio(struct bio *bio, unsigned n_sectors) { struct dm_target_io *tio = container_of(bio, struct dm_target_io, clone);unsigned bi_size = bio->bi_iter.bi_size >>SECTOR_SHIFT ; +BUG_ON (bio->bi_opf &REQ_PREFLUSH ); +BUG_ON (op_is_zone_mgmt (bio_op (bio))); +BUG_ON (bio_op (bio) ==REQ_OP_ZONE_APPEND );BUG_ON (bi_size > *tio->len_ptr);BUG_ON (n_sectors > bi_size); + *tio->len_ptr -= bi_size - n_sectors; bio->bi_iter.bi_size = n_sectors <<SECTOR_SHIFT ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 54/215 net: bridge: mrp: Update ring transitions.
In reply to Greg Kroah-HartmanFrom: Horatiu Vultur <[email protected]>
[ Upstream commit fcb34635854a5a5814227628867ea914a9805384 ]
According to the standard IEC 62439-2, the number of transitions needs to be counted for each transition 'between' ring state open and ring state closed and not from open state to closed state.
Therefore fix this for both ring and interconnect ring.
--- net/bridge/br_mrp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
net/bridge/br_mrp.c +2 -4
@@ -607,8 +607,7 @@ int br_mrp_set_ring_state(struct net_bridge *br,if (!mrp)return -EINVAL ; -if (mrp->ring_state ==BR_MRP_RING_STATE_CLOSED && - state->ring_state !=BR_MRP_RING_STATE_CLOSED ) +if (mrp->ring_state != state->ring_state) mrp->ring_transitions++; mrp->ring_state = state->ring_state;
@@ -690,8 +689,7 @@ int br_mrp_set_in_state(struct net_bridge *br, struct br_mrp_in_state *state)if (!mrp)return -EINVAL ; -if (mrp->in_state ==BR_MRP_IN_STATE_CLOSED && - state->in_state !=BR_MRP_IN_STATE_CLOSED ) +if (mrp->in_state != state->in_state) mrp->in_transitions++; mrp->in_state = state->in_state;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 55/215 pinctrl: mcp23s08: fix race condition in irq handler
In reply to Greg Kroah-HartmanFrom: Radim Pavlik <[email protected]>
[ Upstream commit 897120d41e7afd9da435cb00041a142aeeb53c07 ]
Checking value of MCP_INTF in mcp23s08_irq suggests that the handler may be called even when there is no interrupt pending.
But the actual interrupt could happened between reading MCP_INTF and MCP_GPIO. In this situation we got nothing from MCP_INTF, but the event gets acknowledged on the expander by reading MCP_GPIO. This leads to losing events.
Fix the problem by not reading any register until we see something in MCP_INTF.
The error was reproduced and fix tested on MCP23017.
--- drivers/pinctrl/pinctrl-mcp23s08.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/pinctrl/pinctrl-mcp23s08.c +5 -5
@@ -351,6 +351,11 @@ static irqreturn_t mcp23s08_irq(int irq, void *data)if (mcp_read (mcp,MCP_INTF , &intf)) goto unlock; +if (intf ==0 ) { +/* There is no interrupt pending */ +return IRQ_HANDLED ; + } +if (mcp_read (mcp,MCP_INTCAP , &intcap)) goto unlock;
@@ -368,11 +373,6 @@ static irqreturn_t mcp23s08_irq(int irq, void *data) mcp->cached_gpio = gpio;mutex_unlock (&mcp->lock); -if (intf ==0 ) { -/* There is no interrupt pending */ -return IRQ_HANDLED ; - } -dev_dbg (mcp->chip.parent,"intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n" , intcap, intf, gpio_orig, gpio);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 56/215 ice: set the value of global config lock timeout longer
In reply to Greg Kroah-HartmanFrom: Liwei Song <[email protected]>
[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ]
It may need hold Global Config Lock a longer time when download DDP package file, extend the timeout value to 5000ms to ensure that download can be finished before other AQ command got time to run, this will fix the issue below when probe the device, 5000ms is a test value that work with both Backplane and BreakoutCable NVM image:
ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12
--- drivers/net/ethernet/intel/ice/ice_type.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_type.h +1 -1
@@ -63,7 +63,7 @@ enum ice_aq_res_ids {/* FW update timeout definitions are in milliseconds */ #define ICE_NVM_TIMEOUT 180000#define ICE_CHANGE_LOCK_TIMEOUT 1000 -#define ICE_GLOBAL_CFG_LOCK_TIMEOUT 3000 +#define ICE_GLOBAL_CFG_LOCK_TIMEOUT 5000enum ice_aq_res_access_type {ICE_RES_READ =1 ,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 57/215 ice: fix clang warning regarding deadcode.DeadStores
In reply to Greg Kroah-HartmanFrom: Paul M Stillwell Jr <[email protected]>
[ Upstream commit 7e94090ae13e1ae5fe8bd3a9cd08136260bb7039 ]
clang generates deadcode.DeadStores warnings when a variable is used to read a value, but then that value isn't used later in the code. Fix this warning.
--- drivers/net/ethernet/intel/ice/ice_ethtool.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/net/ethernet/intel/ice/ice_ethtool.c +1 -5
@@ -3492,13 +3492,9 @@ static int ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type, struct ice_ring_container *rc) { - struct ice_pf *pf; - if (!rc->ring) return -EINVAL; - pf = rc->ring->vsi->back; -switch (c_type) {case ICE_RX_CONTAINER : ec->use_adaptive_rx_coalesce =ITR_IS_DYNAMIC (rc->itr_setting);
@@ -3510,7 +3506,7 @@ ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type, ec->tx_coalesce_usecs = rc->itr_setting & ~ICE_ITR_DYNAMIC ;break ;default : -dev_dbg (ice_pf_to_dev (pf),"Invalid c_type %d\n" , c_type); +dev_dbg (ice_pf_to_dev (rc->ring->vsi->back),"Invalid c_type %d\n" , c_type);return -EINVAL ; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 58/215 virtio_net: Remove BUG() to avoid machine dead
In reply to Greg Kroah-HartmanFrom: Xianting Tian <[email protected]>
[ Upstream commit 85eb1389458d134bdb75dad502cc026c3753a619 ]
We should not directly BUG() when there is hdr error, it is better to output a print when such error happens. Currently, the caller of xmit_skb() already did it.
--- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/virtio_net.c +1 -1
@@ -1563,7 +1563,7 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)if (virtio_net_hdr_from_skb (skb, &hdr->hdr,virtio_is_little_endian (vi->vdev), false,0 )) -BUG (); +return -EPROTO ;if (vi->mergeable_rx_bufs) hdr->num_buffers =0 ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 59/215 net: mscc: ocelot: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit f1fe19c2cb3fdc92a614cf330ced1613f8f1a681 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/dsa/ocelot/seville_vsc9953.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/dsa/ocelot/seville_vsc9953.c +5 -0
@@ -1214,6 +1214,11 @@ static int seville_probe(struct platform_device *pdev) felix->info = &seville_info_vsc9953; res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) { + err = -EINVAL ; +dev_err (&pdev->dev,"Invalid resource\n" ); + goto err_alloc_felix; + } felix->switch_base = res->start; ds =kzalloc (sizeof (struct dsa_switch ),GFP_KERNEL );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 60/215 net: bcmgenet: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/broadcom/genet/bcmmii.c +4 -0
@@ -423,6 +423,10 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)int id, ret; pres =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!pres) { +dev_err (&pdev->dev,"Invalid resource\n" ); +return -EINVAL ; + }memset (&res,0 ,sizeof (res));memset (&ppd,0 ,sizeof (ppd));
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 61/215 net: mvpp2: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 0bb51a3a385790a4be20085494cf78f70dadf646 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +4 -0
@@ -6871,6 +6871,10 @@ static int mvpp2_probe(struct platform_device *pdev)return PTR_ERR (priv->lms_base); }else { res =platform_get_resource (pdev,IORESOURCE_MEM ,1 ); +if (!res) { +dev_err (&pdev->dev,"Invalid resource\n" ); +return -EINVAL ; + }if (has_acpi_companion (&pdev->dev)) {/* In case the MDIO memory region is declared in * the ACPI, it can already appear as 'in-use'
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 62/215 net: micrel: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/ethernet/micrel/ks8842.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/micrel/ks8842.c +4 -0
@@ -1135,6 +1135,10 @@ static int ks8842_probe(struct platform_device *pdev)unsigned i; iomem =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!iomem) { +dev_err (&pdev->dev,"Invalid resource\n" ); +return -EINVAL ; + }if (!request_mem_region (iomem->start,resource_size (iomem),DRV_NAME )) goto err_mem_region;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 63/215 net: moxa: Use devm_platform_get_and_ioremap_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it.
--- drivers/net/ethernet/moxa/moxart_ether.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/ethernet/moxa/moxart_ether.c +2 -3
@@ -481,14 +481,13 @@ static int moxart_mac_probe(struct platform_device *pdev) priv->ndev = ndev; priv->pdev = pdev; - res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); - ndev->base_addr = res->start; - priv->base =devm_ioremap_resource (p_dev, res); + priv->base =devm_platform_get_and_ioremap_resource (pdev,0 , &res);if (IS_ERR (priv->base)) {dev_err (p_dev,"devm_ioremap_resource failed\n" ); ret =PTR_ERR (priv->base); goto init_fail; } + ndev->base_addr = res->start;spin_lock_init (&priv->txlock);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 64/215 drm/amd/display: Fix DCN 3.01 DSCCLK validation
In reply to Greg Kroah-HartmanFrom: Nikola Cornij <[email protected]>
[ Upstream commit 346cf627fb27c0fea63a041cedbaa4f31784e504 ]
[why]
DSCCLK validation is not necessary because DSCCLK is derrived from DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too. Doing DSCLK validation in addition to DISPCLK leads to modes being wrongly rejected when DSCCLK was incorrectly set outside of DML.
[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK
--- .../dc/dml/dcn30/display_mode_vba_30.c | 64 ++++++------------- 1 file changed, 21 insertions(+), 43 deletions(-)
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c +21 -43
@@ -64,6 +64,7 @@ typedef struct {#define BPP_INVALID 0#define BPP_BLENDED_PIPE 0xffffffff#define DCN30_MAX_DSC_IMAGE_WIDTH 5184 +#define DCN30_MAX_FMT_420_BUFFER_WIDTH 4096static void DisplayPipeConfiguration (struct display_mode_lib *mode_lib); static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation(
@@ -3987,19 +3988,30 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l }else if (v->PlaneRequiredDISPCLKWithoutODMCombine > v->MaxDispclkRoundedDownToDFSGranularity) { v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1; v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1; - }else if (v->DSCEnabled[k] && (v->HActive[k] >DCN30_MAX_DSC_IMAGE_WIDTH )) { - v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1; - v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1; }else { v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_disabled; v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithoutODMCombine; -/*420 format workaround*/ -if (v->HActive[k] >4096 && v->OutputFormat[k] == dm_420) { + } +if (v->DSCEnabled[k] && v->HActive[k] >DCN30_MAX_DSC_IMAGE_WIDTH + && v->ODMCombineEnablePerState[i][k] != dm_odm_combine_mode_4to1) { +if (v->HActive[k] /2 >DCN30_MAX_DSC_IMAGE_WIDTH ) { + v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_4to1; + v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine4To1; + }else { + v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1; + v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1; + } + } +if (v->OutputFormat[k] == dm_420 && v->HActive[k] >DCN30_MAX_FMT_420_BUFFER_WIDTH + && v->ODMCombineEnablePerState[i][k] != dm_odm_combine_mode_4to1) { +if (v->HActive[k] /2 >DCN30_MAX_FMT_420_BUFFER_WIDTH ) { + v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_4to1; + v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine4To1; + }else { v->ODMCombineEnablePerState[i][k] = dm_odm_combine_mode_2to1; v->PlaneRequiredDISPCLK = v->PlaneRequiredDISPCLKWithODMCombine2To1; } } -if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_4to1) { v->MPCCombine[i][j][k] = false; v->NoOfDPP[i][j][k] =4 ;
@@ -4281,42 +4293,8 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l } } -for (i =0 ; i < v->soc.num_states; i++) { - v->DSCCLKRequiredMoreThanSupported[i] = false; -for (k =0 ; k <= v->NumberOfActivePlanes -1 ; k++) { -if (v->BlendingAndTiming[k] == k) { -if (v->Output[k] == dm_dp || v->Output[k] == dm_edp) { -if (v->OutputFormat[k] == dm_420) { - v->DSCFormatFactor =2 ; - }else if (v->OutputFormat[k] == dm_444) { - v->DSCFormatFactor =1 ; - }else if (v->OutputFormat[k] == dm_n422) { - v->DSCFormatFactor =2 ; - }else { - v->DSCFormatFactor =1 ; - } -if (v->RequiresDSC[i][k] == true) { -if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_4to1) { -if (v->PixelClockBackEnd[k] /12.0 / v->DSCFormatFactor - > (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * v->MaxDSCCLK[i]) { - v->DSCCLKRequiredMoreThanSupported[i] = true; - } - }else if (v->ODMCombineEnablePerState[i][k] == dm_odm_combine_mode_2to1) { -if (v->PixelClockBackEnd[k] /6.0 / v->DSCFormatFactor - > (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * v->MaxDSCCLK[i]) { - v->DSCCLKRequiredMoreThanSupported[i] = true; - } - }else { -if (v->PixelClockBackEnd[k] /3.0 / v->DSCFormatFactor - > (1.0 - v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * v->MaxDSCCLK[i]) { - v->DSCCLKRequiredMoreThanSupported[i] = true; - } - } - } - } - } - } - } +/* Skip dscclk validation: as long as dispclk is supported, dscclk is also implicitly supported */ +for (i =0 ; i < v->soc.num_states; i++) { v->NotEnoughDSCUnits[i] = false; v->TotalDSCUnitsRequired =0.0 ;
@@ -5319,7 +5297,7 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lfor (j =0 ; j <2 ; j++) {if (v->ScaleRatioAndTapsSupport ==1 && v->SourceFormatPixelAndScanSupport ==1 && v->ViewportSizeSupport[i][j] ==1 && v->DIOSupport[i] ==1 && v->ODMCombine4To1SupportCheckOK[i] ==1 - && v->NotEnoughDSCUnits[i] ==0 && v->DSCCLKRequiredMoreThanSupported[i] ==0 + && v->NotEnoughDSCUnits[i] ==0 && v->DTBCLKRequiredMoreThanSupported[i] ==0 && v->ROBSupport[i][j] ==1 && v->DISPCLK_DPPCLK_Support[i][j] ==1 && v->TotalAvailablePipesSupport[i][j] ==1 && EnoughWritebackUnits == 1 && WritebackModeSupport == 1
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 65/215 drm/amd/display: Update scaling settings on modeset
In reply to Greg Kroah-HartmanFrom: Roman Li <[email protected]>
[ Upstream commit c521fc316d12fb9ea7b7680e301d673bceda922e ]
[Why]
We update scaling settings when scaling mode has been changed. However when changing mode from native resolution the scaling mode previously set gets ignored.
[How]
Perform scaling settings update on modeset.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +2 -1
@@ -8291,7 +8291,8 @@ skip_modeset:BUG_ON (dm_new_crtc_state->stream ==NULL );/* Scaling or underscan settings */ -if (is_scaling_state_different (dm_old_conn_state, dm_new_conn_state)) +if (is_scaling_state_different (dm_old_conn_state, dm_new_conn_state) || +drm_atomic_crtc_needs_modeset (new_crtc_state))update_stream_scaling_settings ( &new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 66/215 drm/amd/display: Release MST resources on switch from MST to SST
In reply to Greg Kroah-HartmanFrom: Vladimir Stempen <[email protected]>
[ Upstream commit 3f8518b60c10aa96f3efa38a967a0b4eb9211ac0 ]
[why]
When OS overrides training link training parameters for MST device to SST mode, MST resources are not released and leak of the resource may result crash and incorrect MST discovery during following hot plugs.
[how]
Retaining sink object to be reused by SST link and releasing MST resources.
--- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +2 -0
@@ -1704,6 +1704,8 @@ static void set_dp_mst_mode(struct dc_link *link, bool mst_enable) link->type = dc_connection_single; link->local_sink = link->remote_sinks[0 ]; link->local_sink->sink_signal =SIGNAL_TYPE_DISPLAY_PORT ; +dc_sink_retain (link->local_sink); +dm_helpers_dp_mst_stop_top_mgr (link->ctx, link); }else if (mst_enable == true && link->type == dc_connection_single && link->remote_sinks[0 ] !=NULL ) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 67/215 drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7
In reply to Greg Kroah-HartmanFrom: Wesley Chalmers <[email protected]>
[ Upstream commit 3577e1678772ce3ede92af3a75b44a4b76f9b4ad ]
[WHY]DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.
--- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +1 -1
@@ -243,7 +243,7 @@ void dcn20_dccg_init(struct dce_hwseq *hws)REG_WRITE (MILLISECOND_TIME_BASE_DIV ,0x1186a0 );/* This value is dependent on the hardware pipeline delay so set once per SOC */ -REG_WRITE (DISPCLK_FREQ_CHANGE_CNTL ,0x801003c ); +REG_WRITE (DISPCLK_FREQ_CHANGE_CNTL ,0xe01003c ); } void dcn20_disable_vga(
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 68/215 drm/amd/display: Fix off-by-one error in DML
In reply to Greg Kroah-HartmanFrom: Wesley Chalmers <[email protected]>
[ Upstream commit e4e3678260e9734f6f41b4325aac0b171833a618 ]
[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at index num_states.
--- .../amd/display/dc/dml/dcn30/display_mode_vba_30.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c +7 -7
@@ -2053,7 +2053,7 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman v->DISPCLKWithoutRamping, v->DISPCLKDPPCLKVCOSpeed); v->MaxDispclkRoundedToDFSGranularity =RoundToDFSGranularityDown ( - v->soc.clock_limits[mode_lib->soc.num_states].dispclk_mhz, + v->soc.clock_limits[mode_lib->soc.num_states -1 ].dispclk_mhz, v->DISPCLKDPPCLKVCOSpeed);if (v->DISPCLKWithoutRampingRoundedToDFSGranularity > v->MaxDispclkRoundedToDFSGranularity) {
@@ -3958,20 +3958,20 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lfor (k =0 ; k <= v->NumberOfActivePlanes -1 ; k++) { v->PlaneRequiredDISPCLKWithoutODMCombine = v->PixelClock[k] * (1.0 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * (1.0 + v->DISPCLKRampingMargin /100.0 ); -if ((v->PlaneRequiredDISPCLKWithoutODMCombine >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states] - && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) { +if ((v->PlaneRequiredDISPCLKWithoutODMCombine >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states -1 ] + && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states -1 ])) { v->PlaneRequiredDISPCLKWithoutODMCombine = v->PixelClock[k] * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ); } v->PlaneRequiredDISPCLKWithODMCombine2To1 = v->PixelClock[k] /2 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * (1 + v->DISPCLKRampingMargin /100.0 ); -if ((v->PlaneRequiredDISPCLKWithODMCombine2To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states] - && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) { +if ((v->PlaneRequiredDISPCLKWithODMCombine2To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states -1 ] + && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states -1 ])) { v->PlaneRequiredDISPCLKWithODMCombine2To1 = v->PixelClock[k] /2 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ); } v->PlaneRequiredDISPCLKWithODMCombine4To1 = v->PixelClock[k] /4 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ) * (1 + v->DISPCLKRampingMargin /100.0 ); -if ((v->PlaneRequiredDISPCLKWithODMCombine4To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states] - && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states])) { +if ((v->PlaneRequiredDISPCLKWithODMCombine4To1 >= v->MaxDispclk[i] && v->MaxDispclk[i] == v->MaxDispclk[mode_lib->soc.num_states -1 ] + && v->MaxDppclk[i] == v->MaxDppclk[mode_lib->soc.num_states -1 ])) { v->PlaneRequiredDISPCLKWithODMCombine4To1 = v->PixelClock[k] /4 * (1 + v->DISPCLKDPPCLKDSCCLKDownSpreading /100.0 ); }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 69/215 net: phy: realtek: add delay to fix RXC generation issue
In reply to Greg Kroah-HartmanFrom: Joakim Zhang <[email protected]>
[ Upstream commit 6813cc8cfdaf401476e1a007cec8ae338cefa573 ]
PHY will delay about 11.5ms to generate RXC clock when switching from power down to normal operation. Read/write registers would also cause RXC become unstable and stop for a while during this process. Realtek engineer suggests 15ms or more delay can workaround this issue.
--- drivers/net/phy/realtek.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/net/phy/realtek.c +14 -1
@@ -246,6 +246,19 @@ static int rtl8211f_config_init(struct phy_device *phydev)return 0 ; } +static int rtl821x_resume (struct phy_device *phydev) +{ +int ret; + + ret =genphy_resume (phydev); +if (ret <0 ) +return ret; + +msleep (20 ); + +return 0 ; +} +static int rtl8211e_config_init (struct phy_device *phydev) {int ret =0 , oldpage;
@@ -624,7 +637,7 @@ static struct phy_driver realtek_drvs[] = { .ack_interrupt = &rtl8211f_ack_interrupt, .config_intr = &rtl8211f_config_intr, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtl821x_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 70/215 selftests: Clean forgotten resources as part of cleanup()
In reply to Greg Kroah-HartmanFrom: Amit Cohen <[email protected]>
[ Upstream commit e67dfb8d15deb33c425d0b0ee22f2e5eef54c162 ]
Several tests do not set some ports down as part of their cleanup(), resulting in IPv6 link-local addresses and associated routes not being deleted.
These leaks were found using a BPF tool that monitors ASIC resources.
Solve this by setting the ports down at the end of the tests.
--- .../selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh | 3 +++ .../selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh | 3 +++ tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh | 2 ++ tools/testing/selftests/net/forwarding/pedit_dsfield.sh | 2 ++ tools/testing/selftests/net/forwarding/pedit_l4port.sh | 2 ++ tools/testing/selftests/net/forwarding/skbedit_priority.sh | 2 ++ 6 files changed, 14 insertions(+)
tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh +3 -0
@@ -108,6 +108,9 @@ router_destroy() __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down } setup_prepare()
tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh +3 -0
@@ -111,6 +111,9 @@ router_destroy() __addr_add_del $rp1 del 192.0.2.2/24 2001:db8:1::2/64 tc qdisc del dev $rp2 clsact + + ip link set dev $rp2 down + ip link set dev $rp1 down } setup_prepare()
tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh +2 -0
@@ -93,7 +93,9 @@ switch_destroy() lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null lldpad_app_wait_del + ip link set dev $swp2 down ip link set dev $swp2 nomaster + ip link set dev $swp1 down ip link set dev $swp1 nomaster ip link del dev br1 }
tools/testing/selftests/net/forwarding/pedit_dsfield.sh +2 -0
@@ -75,7 +75,9 @@ switch_destroy() tc qdisc del dev $swp2 clsact tc qdisc del dev $swp1 clsact + ip link set dev $swp2 down ip link set dev $swp2 nomaster + ip link set dev $swp1 down ip link set dev $swp1 nomaster ip link del dev br1 }
tools/testing/selftests/net/forwarding/pedit_l4port.sh +2 -0
@@ -71,7 +71,9 @@ switch_destroy() tc qdisc del dev $swp2 clsact tc qdisc del dev $swp1 clsact + ip link set dev $swp2 down ip link set dev $swp2 nomaster + ip link set dev $swp1 down ip link set dev $swp1 nomaster ip link del dev br1 }
tools/testing/selftests/net/forwarding/skbedit_priority.sh +2 -0
@@ -72,7 +72,9 @@ switch_destroy() tc qdisc del dev $swp2 clsact tc qdisc del dev $swp1 clsact + ip link set dev $swp2 down ip link set dev $swp2 nomaster + ip link set dev $swp1 down ip link set dev $swp1 nomaster ip link del dev br1 }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 71/215 net: sgi: ioc3-eth: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit db8f7be1e1d64fbf113a456ef94534fbf5e9a9af ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/ethernet/sgi/ioc3-eth.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/sgi/ioc3-eth.c +4 -0
@@ -835,6 +835,10 @@ static int ioc3eth_probe(struct platform_device *pdev)int err; regs =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!regs) { +dev_err (&pdev->dev,"Invalid resource\n" ); +return -EINVAL ; + }/* get mac addr from one wire prom */ if (ioc3eth_get_mac_addr (regs, mac_addr))return -EPROBE_DEFER ;/* not available yet */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 72/215 drm/amdkfd: use allowed domain for vmbo validation
In reply to Greg Kroah-HartmanFrom: Nirmoy Das <[email protected]>
[ Upstream commit bc05716d4fdd065013633602c5960a2bf1511b9c ]
Fixes handling when page tables are in system memory.
v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.
--- .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 21 ++++--------------- 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +4 -17
@@ -48,12 +48,6 @@ static struct {spinlock_t mem_limit_lock; } kfd_mem_limit; -/* Struct used for amdgpu_amdkfd_bo_validate */ -struct amdgpu_vm_parser { -uint32_t domain; -bool wait; -}; -static const char *const domain_bit_to_string[] = {"CPU" ,"GTT" ,
@@ -337,11 +331,9 @@ validate_fail:return ret; } -static int amdgpu_amdkfd_validate (void *param,struct amdgpu_bo *bo) +static int amdgpu_amdkfd_validate_vm_bo (void *_unused,struct amdgpu_bo *bo) { -struct amdgpu_vm_parser *p = param; - -return amdgpu_amdkfd_bo_validate (bo, p->domain, p->wait); +return amdgpu_amdkfd_bo_validate (bo, bo->allowed_domains, false); }/* vm_validate_pt_pd_bos - Validate page table and directory BOs
@@ -355,20 +347,15 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm) {struct amdgpu_bo *pd = vm->root.base.bo;struct amdgpu_device *adev =amdgpu_ttm_adev (pd->tbo.bdev); -struct amdgpu_vm_parser param;int ret; - param.domain =AMDGPU_GEM_DOMAIN_VRAM ; - param.wait = false; - - ret =amdgpu_vm_validate_pt_bos (adev, vm, amdgpu_amdkfd_validate, - ¶m); + ret =amdgpu_vm_validate_pt_bos (adev, vm, amdgpu_amdkfd_validate_vm_bo,NULL );if (ret) {pr_err ("failed to validate PT BOs\n" );return ret; } - ret =amdgpu_amdkfd_validate (¶m, pd); + ret =amdgpu_amdkfd_validate_vm_bo (NULL , pd);if (ret) {pr_err ("failed to validate PD\n" );return ret;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 73/215 fjes: check return value after calling platform_get_resource()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit f18c11812c949553d2b2481ecaa274dd51bed1e7 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
--- drivers/net/fjes/fjes_main.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/fjes/fjes_main.c +4 -0
@@ -1262,6 +1262,10 @@ static int fjes_probe(struct platform_device *plat_dev) adapter->interrupt_watch_enable = false; res =platform_get_resource (plat_dev,IORESOURCE_MEM ,0 ); +if (!res) { + err = -EINVAL ; + goto err_free_control_wq; + } hw->hw_res.start = res->start; hw->hw_res.size =resource_size (res); hw->hw_res.irq =platform_get_irq (plat_dev,0 );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 74/215 selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
In reply to Greg Kroah-HartmanFrom: Minchan Kim <[email protected]>
[ Upstream commit 648f2c6100cfa18e7dfe43bc0b9c3b73560d623c ]
In the field, we have seen lots of allocation failure from the call path below.
06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0
...
...
06-03 13:29:12.999 1010315 31557 31557 W Call trace:
06-03 13:29:12.999 1010315 31557 31557 W : dump_backtrace.cfi_jt+0x0/0x8 06-03 13:29:12.999 1010315 31557 31557 W : dump_stack+0xc8/0x14c 06-03 13:29:12.999 1010315 31557 31557 W : warn_alloc+0x158/0x1c8 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_slowpath+0x9d8/0xb80 06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_nodemask+0x1c4/0x430 06-03 13:29:12.999 1010315 31557 31557 W : allocate_slab+0xb4/0x390 06-03 13:29:12.999 1010315 31557 31557 W : ___slab_alloc+0x12c/0x3a4 06-03 13:29:12.999 1010315 31557 31557 W : kmem_cache_alloc+0x358/0x5e4 06-03 13:29:12.999 1010315 31557 31557 W : avc_alloc_node+0x30/0x184 06-03 13:29:12.999 1010315 31557 31557 W : avc_update_node+0x54/0x4f0 06-03 13:29:12.999 1010315 31557 31557 W : avc_has_extended_perms+0x1a4/0x460 06-03 13:29:12.999 1010315 31557 31557 W : selinux_file_ioctl+0x320/0x3d0 06-03 13:29:12.999 1010315 31557 31557 W : __arm64_sys_ioctl+0xec/0x1fc 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc_common+0xc0/0x24c 06-03 13:29:12.999 1010315 31557 31557 W : el0_svc+0x28/0x88 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync_handler+0x8c/0xf0 06-03 13:29:12.999 1010315 31557 31557 W : el0_sync+0x1a4/0x1c0 .. .. 06-03 13:29:12.999 1010315 31557 31557 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010315 31557 31557 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010315 31557 31557 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0 06-03 13:29:13.000 10230 30892 30892 W node 0 : slabs: 57, objs: 2907, free: 0 06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO) 06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
Based on [1], selinux is tolerate for failure of memory allocation. Then, use __GFP_NOWARN together.
[1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches")
--- security/selinux/avc.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
security/selinux/avc.c +7 -6
@@ -297,26 +297,27 @@ static struct avc_xperms_decision_nodestruct avc_xperms_decision_node *xpd_node;struct extended_perms_decision *xpd; - xpd_node =kmem_cache_zalloc (avc_xperms_decision_cachep,GFP_NOWAIT ); + xpd_node =kmem_cache_zalloc (avc_xperms_decision_cachep, +GFP_NOWAIT | __GFP_NOWARN);if (!xpd_node)return NULL ; xpd = &xpd_node->xpd;if (which &XPERMS_ALLOWED ) { xpd->allowed =kmem_cache_zalloc (avc_xperms_data_cachep, -GFP_NOWAIT ); +GFP_NOWAIT | __GFP_NOWARN);if (!xpd->allowed) goto error; }if (which &XPERMS_AUDITALLOW ) { xpd->auditallow =kmem_cache_zalloc (avc_xperms_data_cachep, -GFP_NOWAIT ); +GFP_NOWAIT | __GFP_NOWARN);if (!xpd->auditallow) goto error; }if (which &XPERMS_DONTAUDIT ) { xpd->dontaudit =kmem_cache_zalloc (avc_xperms_data_cachep, -GFP_NOWAIT ); +GFP_NOWAIT | __GFP_NOWARN);if (!xpd->dontaudit) goto error; }
@@ -344,7 +345,7 @@ static struct avc_xperms_node *avc_xperms_alloc(void) {struct avc_xperms_node *xp_node; - xp_node =kmem_cache_zalloc (avc_xperms_cachep,GFP_NOWAIT ); + xp_node =kmem_cache_zalloc (avc_xperms_cachep,GFP_NOWAIT | __GFP_NOWARN);if (!xp_node)return xp_node;INIT_LIST_HEAD (&xp_node->xpd_head);
@@ -500,7 +501,7 @@ static struct avc_node *avc_alloc_node(struct selinux_avc *avc) {struct avc_node *node; - node =kmem_cache_zalloc (avc_node_cachep,GFP_NOWAIT ); + node =kmem_cache_zalloc (avc_node_cachep,GFP_NOWAIT | __GFP_NOWARN);if (!node) goto out;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 75/215 r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM
In reply to Greg Kroah-HartmanFrom: Heiner Kallweit <[email protected]>
[ Upstream commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207 ]
It has been reported that on RTL8106e the link-up interrupt may be significantly delayed if the user enables ASPM L1. Per default ASPM is disabled. The change leaves L1 enabled on the PCIe link (thus still allowing to reach higher package power saving states), but the NIC won't actively trigger it.
--- drivers/net/ethernet/realtek/r8169_main.c | 1 - 1 file changed, 1 deletion(-)
drivers/net/ethernet/realtek/r8169_main.c +0 -1
@@ -3547,7 +3547,6 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)rtl_eri_write (tp,0x1b0 ,ERIAR_MASK_0011 ,0x0000 );rtl_pcie_state_l2l3_disable (tp); -rtl_hw_aspm_clkreq_enable (tp, true); }DECLARE_RTL_COND (rtl_mac_ocp_e00e_cond)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 76/215 drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_check
In reply to Greg Kroah-HartmanFrom: Mark Yacoub <[email protected]>
[ Upstream commit 03fc4cf45d30533d54f0f4ebc02aacfa12f52ce2 ]
For each CRTC state, check the size of Gamma and Degamma LUTs so unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++ .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + .../amd/display/amdgpu_dm/amdgpu_dm_color.c | 41 ++++++++++++++++--- 3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
@@ -8745,6 +8745,10 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, old_crtc_state->vrr_enabled == new_crtc_state->vrr_enabled)continue ; + ret =amdgpu_dm_verify_lut_sizes (new_crtc_state); +if (ret) + goto fail; +if (!new_crtc_state->enable)continue ;
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +1 -0
@@ -498,6 +498,7 @@ void amdgpu_dm_trigger_timing_sync(struct drm_device *dev);#define MAX_COLOR_LEGACY_LUT_ENTRIES 256void amdgpu_dm_init_color_mod (void ); +int amdgpu_dm_verify_lut_sizes (const struct drm_crtc_state *crtc_state);int amdgpu_dm_update_crtc_color_mgmt (struct dm_crtc_state *crtc);int amdgpu_dm_update_plane_color_mgmt (struct dm_crtc_state *crtc,struct dc_plane_state *dc_plane_state);
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c +35 -6
55 lines not on this page · raw message
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 77/215 xfrm: Fix error reporting in xfrm_state_construct.
In reply to Greg Kroah-HartmanFrom: Steffen Klassert <[email protected]>
[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]
When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails, the error will not be reported because the -ENOMEM assignment to the err variable is overwritten before. Fix this by moving these two in front of the function so that memory allocation failures will be reported.
--- net/xfrm/xfrm_user.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
net/xfrm/xfrm_user.c +14 -14
@@ -580,6 +580,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,copy_from_user_state (x, p); +if (attrs[XFRMA_ENCAP ]) { + x->encap =kmemdup (nla_data (attrs[XFRMA_ENCAP ]), +sizeof (*x->encap),GFP_KERNEL ); +if (x->encap ==NULL ) + goto error; + } + +if (attrs[XFRMA_COADDR ]) { + x->coaddr =kmemdup (nla_data (attrs[XFRMA_COADDR ]), +sizeof (*x->coaddr),GFP_KERNEL ); +if (x->coaddr ==NULL ) + goto error; + } +if (attrs[XFRMA_SA_EXTRA_FLAGS ]) x->props.extra_flags =nla_get_u32 (attrs[XFRMA_SA_EXTRA_FLAGS ]);
@@ -600,23 +614,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net, attrs[XFRMA_ALG_COMP]))) goto error; -if (attrs[XFRMA_ENCAP ]) { - x->encap =kmemdup (nla_data (attrs[XFRMA_ENCAP ]), -sizeof (*x->encap),GFP_KERNEL ); -if (x->encap ==NULL ) - goto error; - } -if (attrs[XFRMA_TFCPAD ]) x->tfcpad =nla_get_u32 (attrs[XFRMA_TFCPAD ]); -if (attrs[XFRMA_COADDR ]) { - x->coaddr =kmemdup (nla_data (attrs[XFRMA_COADDR ]), -sizeof (*x->coaddr),GFP_KERNEL ); -if (x->coaddr ==NULL ) - goto error; - } -xfrm_mark_get (attrs, &x->mark);xfrm_smark_init (attrs, &x->props.smark);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 78/215 dm writecache: commit just one block, not a full page
In reply to Greg Kroah-HartmanFrom: Mikulas Patocka <[email protected]>
[ Upstream commit 991bd8d7bc78966b4dc427b53a144f276bffcd52 ]
Some architectures have pages larger than 4k and committing a full page causes needless overhead.
Fix this by writing a single block when committing the superblock.
--- drivers/md/dm-writecache.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/md/dm-writecache.c +1 -5
@@ -532,11 +532,7 @@ static void ssd_commit_superblock(struct dm_writecache *wc) region.bdev = wc->ssd_dev->bdev; region.sector =0 ; - region.count =PAGE_SIZE >>SECTOR_SHIFT ; - -if (unlikely (region.sector + region.count > wc->metadata_sectors)) - region.count = wc->metadata_sectors - region.sector; - + region.count = wc->block_size >>SECTOR_SHIFT ; region.sector += wc->start_sector; req.bi_op =REQ_OP_WRITE ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 79/215 wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
In reply to Greg Kroah-HartmanFrom: Tony Lindgren <[email protected]>
[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]
At least on wl12xx, reading the MAC after boot can fail with a warning at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read. The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not produce similar errors.
--- drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/net/wireless/ti/wl12xx/main.c +7 -0
@@ -1503,6 +1503,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)u32 mac1, mac2;int ret; +/* Device may be in ELP from the bootloader or kexec */ + ret =wlcore_write32 (wl,WL12XX_WELP_ARM_COMMAND ,WELP_ARM_COMMAND_VAL ); +if (ret <0 ) + goto out; + +usleep_range (500000 ,700000 ); + ret =wlcore_set_partition (wl, &wl->ptable[PART_DRPW ]);if (ret <0 ) goto out;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 80/215 wl1251: Fix possible buffer overflow in wl1251_cmd_scan
In reply to Greg Kroah-HartmanFrom: Lee Gibson <[email protected]>
[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]
Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size.
--- drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/wireless/ti/wl1251/cmd.c +6 -3
@@ -466,9 +466,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, cmd->channels[i].channel = channels[i]->hw_value; } - cmd->params.ssid_len = ssid_len; -if (ssid) -memcpy (cmd->params.ssid, ssid, ssid_len); +if (ssid) { +int len =clamp_val (ssid_len,0 ,IEEE80211_MAX_SSID_LEN ); + + cmd->params.ssid_len = len; +memcpy (cmd->params.ssid, ssid, len); + } ret =wl1251_cmd_send (wl,CMD_SCAN , cmd,sizeof (*cmd));if (ret <0 ) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 81/215 cw1200: add missing MODULE_DEVICE_TABLE
In reply to Greg Kroah-HartmanFrom: Zou Wei <[email protected]>
[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.
--- drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/st/cw1200/cw1200_sdio.c +1 -0
@@ -53,6 +53,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = { { SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) }, { /* end: all zeroes */ }, }; +MODULE_DEVICE_TABLE (sdio, cw1200_sdio_ids);/* hwbus_ops implemetation */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 82/215 drm/amdkfd: fix circular locking on get_wave_state
In reply to Greg Kroah-HartmanFrom: Jonathan Kim <[email protected]>
[ Upstream commit 63f6e01237257e7226efc5087f3f0b525d320f54 ]
get_wave_state acquires the mmap_lock on copy_to_user but so do mmu_notifiers. mmu_notifiers allows dqm locking so do get_wave_state outside the dqm_lock to prevent circular locking.
v2: squash in unused variable removal.
--- .../drm/amd/amdkfd/kfd_device_queue_manager.c | 28 +++++++++---------- 1 file changed, 13 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +13 -15
@@ -1677,29 +1677,27 @@ static int get_wave_state(struct device_queue_manager *dqm, u32 *save_area_used_size) {struct mqd_manager *mqd_mgr; -int r;dqm_lock (dqm); -if (q->properties.type !=KFD_QUEUE_TYPE_COMPUTE || - q->properties.is_active || !q->device->cwsr_enabled) { - r = -EINVAL ; - goto dqm_unlock; - } - mqd_mgr = dqm->mqd_mgrs[KFD_MQD_TYPE_CP ]; -if (!mqd_mgr->get_wave_state) { - r = -EINVAL ; - goto dqm_unlock; +if (q->properties.type !=KFD_QUEUE_TYPE_COMPUTE || + q->properties.is_active || !q->device->cwsr_enabled || + !mqd_mgr->get_wave_state) { +dqm_unlock (dqm); +return -EINVAL ; } - r = mqd_mgr->get_wave_state (mqd_mgr, q->mqd, ctl_stack, - ctl_stack_used_size, save_area_used_size); - -dqm_unlock:dqm_unlock (dqm); -return r; + +/* +* get_wave_state is outside the dqm lock to prevent circular locking +* and the queue should be protected against destruction by the process +* lock. +*/ +return mqd_mgr->get_wave_state (mqd_mgr, q->mqd, ctl_stack, + ctl_stack_used_size, save_area_used_size); } static int process_termination_cpsch(struct device_queue_manager *dqm,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 83/215 drm/amdkfd: Fix circular lock in nocpsch path
In reply to Greg Kroah-HartmanFrom: Amber Lin <[email protected]>
[ Upstream commit a7b2451d31cfa2e8aeccf3b35612ce33f02371fc ]
Calling free_mqd inside of destroy_queue_nocpsch_locked can cause a circular lock. destroy_queue_nocpsch_locked is called under a DQM lock, which is taken in MMU notifiers, potentially in FS reclaim context. Taking another lock, which is BO reservation lock from free_mqd, while causing an FS reclaim inside the DQM lock creates a problematic circular lock dependency. Therefore move free_mqd out of destroy_queue_nocpsch_locked and call it after unlocking DQM.
--- .../drm/amd/amdkfd/kfd_device_queue_manager.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +13 -5
@@ -486,9 +486,6 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm,if (retval == -ETIME ) qpd->reset_wavefronts = true; - - mqd_mgr->free_mqd (mqd_mgr, q->mqd, q->mqd_mem_obj); -list_del (&q->list);if (list_empty (&qpd->queues_list)) {if (qpd->reset_wavefronts) {
@@ -523,6 +520,8 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm,int retval;uint64_t sdma_val =0 ;struct kfd_process_device *pdd =qpd_to_pdd (qpd); +struct mqd_manager *mqd_mgr = + dqm->mqd_mgrs[get_mqd_type_from_queue_type (q->properties.type)];/* Get the SDMA queue stats */ if ((q->properties.type == KFD_QUEUE_TYPE_SDMA) ||
@@ -540,6 +539,8 @@ static int destroy_queue_nocpsch(struct device_queue_manager *dqm, pdd->sdma_past_activity_counter += sdma_val;dqm_unlock (dqm); + mqd_mgr->free_mqd (mqd_mgr, q->mqd, q->mqd_mem_obj); +return retval; }
@@ -1632,7 +1633,7 @@ static int set_trap_handler(struct device_queue_manager *dqm,static int process_termination_nocpsch (struct device_queue_manager *dqm,struct qcm_process_device *qpd) { -struct queue *q, *next; +struct queue *q;struct device_process_node *cur, *next_dpn;int retval =0 ;bool found = false;
@@ -1640,12 +1641,19 @@ static int process_termination_nocpsch(struct device_queue_manager *dqm,dqm_lock (dqm);/* Clear all user mode queues */ -list_for_each_entry_safe (q, next, &qpd->queues_list, list) { +while (!list_empty (&qpd->queues_list)) { +struct mqd_manager *mqd_mgr;int ret; + q = list_first_entry(&qpd->queues_list, struct queue, list); + mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type ( + q->properties.type)]; ret =destroy_queue_nocpsch_locked (dqm, qpd, q);if (ret) retval = ret; +dqm_unlock (dqm); + mqd_mgr->free_mqd (mqd_mgr, q->mqd, q->mqd_mem_obj); +dqm_lock (dqm); }/* Unregister process */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 84/215 bpf: Fix up register-based shifts in interpreter to silence KUBSAN
In reply to Greg Kroah-HartmanFrom: Daniel Borkmann <[email protected]>
[ Upstream commit 28131e9d933339a92f78e7ab6429f4aaaa07061c ]
syzbot reported a shift-out-of-bounds that KUBSAN observed in the interpreter:
[...]
UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2 shift exponent 255 is too large for 64-bit type 'long long unsigned int' CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 ___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420 __bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735 bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline] bpf_prog_run_clear_cb include/linux/filter.h:755 [inline] run_filter+0x1a1/0x470 net/packet/af_packet.c:2031 packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104 dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387 xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609 __dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182 __bpf_tx_skb net/core/filter.c:2116 [inline] __bpf_redirect_no_mac net/core/filter.c:2141 [inline] __bpf_redirect+0x548/0xc80 net/core/filter.c:2164 ____bpf_clone_redirect net/core/filter.c:2448 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420 ___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523 __bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737 bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline] bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50 bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582 bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline] __do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae [...]
Generally speaking, KUBSAN reports from the kernel should be fixed. However, in case of BPF, this particular report caused concerns since the large shift is not wrong from BPF point of view, just undefined. In the verifier, K-based shifts that are >= {64,32} (depending on the bitwidth of the instruction) are already rejected. The register-based cases were not given their content might not be known at verification time. Ideas such as verifier instruction rewrite with an additional AND instruction for the source register were brought up, but regularly rejected due to the additional runtime overhead they incur.
As Edward Cree rightly put it:
Shifts by more than insn bitness are legal in the BPF ISA; they are implementation-defined behaviour [of the underlying architecture], rather than UB, and have been made legal for performance reasons. Each of the JIT backends compiles the BPF shift operations to machine instructions which produce implementation-defined results in such a case; the resulting contents of the register may be arbitrary but program behaviour as a whole remains defined.
Guard checks in the fast path (i.e. affecting JITted code) will thus not be accepted.
The case of division by zero is not truly analogous here, as division instructions on many of the JIT-targeted architectures will raise a machine exception / fault on division by zero, whereas (to the best of my knowledge) none will do so on an out-of-bounds shift.
Given the KUBSAN report only affects the BPF interpreter, but not JITs, one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run(). That would make the shifts defined, and thus shuts up KUBSAN, and the compiler would optimize out the AND on any CPU that interprets the shift amounts modulo the width anyway (e.g., confirmed from disassembly that on x86-64 and arm64 the generated interpreter code is the same before and after this fix).
The BPF interpreter is slow path, and most likely compiled out anyway as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of BPF instructions by the interpreter. Given the main argument was to avoid sacrificing performance, the fact that the AND is optimized away from compiler for mainstream archs helps as well as a solution moving forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors to provide guidance when they see the ___bpf_prog_run() interpreter code and use it as a model for a new JIT backend.
--- kernel/bpf/core.c | 61 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 43 insertions(+), 18 deletions(-)
kernel/bpf/core.c +43 -18
@@ -1395,29 +1395,54 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack) select_insn: goto *jumptable[insn->code]; - /* ALU */ -#define ALU(OPCODE, OP) \ - ALU64_##OPCODE##_X: \ - DST = DST OP SRC; \ - CONT; \ - ALU_##OPCODE##_X: \ - DST = (u32) DST OP (u32) SRC; \ - CONT; \ - ALU64_##OPCODE##_K: \ - DST = DST OP IMM; \ - CONT; \ - ALU_##OPCODE##_K: \ - DST = (u32) DST OP (u32) IMM; \ + /* Explicitly mask the register-based shift amounts with 63 or 31 + * to avoid undefined behavior. Normally this won't affect the + * generated code, for example, in case of native 64 bit archs such + * as x86-64 or arm64, the compiler is optimizing the AND away for + * the interpreter. In case of JITs, each of the JIT backends compiles + * the BPF shift operations to machine instructions which produce + * implementation-defined results in such a case; the resulting + * contents of the register may be arbitrary, but program behaviour + * as a whole remains defined. In other words, in case of JIT backends, + * the AND must /not/ be added to the emitted LSH/RSH/ARSH translation. + */ + /* ALU (shifts) */ +#define SHT(OPCODE, OP) \ + ALU64_##OPCODE##_X: \ + DST = DST OP (SRC & 63); \ + CONT; \ + ALU_##OPCODE##_X: \ + DST = (u32) DST OP ((u32) SRC & 31); \ + CONT; \ + ALU64_##OPCODE##_K: \ + DST = DST OP IMM; \ + CONT; \ + ALU_##OPCODE##_K: \ + DST = (u32) DST OP (u32) IMM; \ + CONT; + /* ALU (rest) */ +#define ALU(OPCODE, OP) \ + ALU64_##OPCODE##_X: \ + DST = DST OP SRC; \ + CONT; \ + ALU_##OPCODE##_X: \ + DST = (u32) DST OP (u32) SRC; \ + CONT; \ + ALU64_##OPCODE##_K: \ + DST = DST OP IMM; \ + CONT; \ + ALU_##OPCODE##_K: \ + DST = (u32) DST OP (u32) IMM; \ CONT; - ALU(ADD, +) ALU(SUB, -) ALU(AND, &) ALU(OR, |) - ALU(LSH, <<) - ALU(RSH, >>) ALU(XOR, ^) ALU(MUL, *) + SHT(LSH, <<) + SHT(RSH, >>) +#undef SHT #undef ALU ALU_NEG: DST = (u32) -DST;
@@ -1442,13 +1467,13 @@ select_insn: insn++;CONT ; ALU_ARSH_X: -DST = (u64) (u32) (((s32 )DST ) >>SRC ); +DST = (u64) (u32) (((s32 )DST ) >> (SRC &31 ));CONT ; ALU_ARSH_K:DST = (u64) (u32) (((s32 )DST ) >>IMM );CONT ; ALU64_ARSH_X: - (*(s64 *) &DST ) >>=SRC ; + (*(s64 *) &DST ) >>= (SRC &63 );CONT ; ALU64_ARSH_K: (*(s64 *) &DST ) >>=IMM ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 85/215 ice: fix incorrect payload indicator on PTYPE
In reply to Greg Kroah-HartmanFrom: Jacob Keller <[email protected]>
[ Upstream commit 638a0c8c8861cb8a3b54203e632ea5dcc23d8ca5 ]
The entry for PTYPE 90 indicates that the payload is layer 3. This does not match the specification in the datasheet which indicates the packet is a MAC, IPv6, UDP packet, with a payload in layer 4.
Fix the lookup table to match the data sheet.
--- drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h +1 -1
@@ -722,7 +722,7 @@ static const struct ice_rx_ptype_decoded ice_ptype_lkup[] = {/* Non Tunneled IPv6 */ ICE_PTT (88 ,IP ,IPV6 ,FRG ,NONE ,NONE ,NOF ,NONE ,PAY3 ),ICE_PTT (89 ,IP ,IPV6 ,NOF ,NONE ,NONE ,NOF ,NONE ,PAY3 ), -ICE_PTT (90 ,IP ,IPV6 ,NOF ,NONE ,NONE ,NOF ,UDP ,PAY3 ), +ICE_PTT (90 ,IP ,IPV6 ,NOF ,NONE ,NONE ,NOF ,UDP ,PAY4 ),ICE_PTT_UNUSED_ENTRY (91 ),ICE_PTT (92 ,IP ,IPV6 ,NOF ,NONE ,NONE ,NOF ,TCP ,PAY4 ), ICE_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4),
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 86/215 ice: mark PTYPE 2 as reserved
In reply to Greg Kroah-HartmanFrom: Jacob Keller <[email protected]>
[ Upstream commit 0c526d440f76676733cb470b454db9d5507a3a50 ]
The entry for PTYPE 2 in the ice_ptype_lkup table incorrectly states that this is an L2 packet with no payload. According to the datasheet, this PTYPE is actually unused and reserved.
Fix the lookup entry to indicate this is an unused entry that is reserved.
--- drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h +1 -1
@@ -608,7 +608,7 @@ static const struct ice_rx_ptype_decoded ice_ptype_lkup[] = {/* L2 Packet types */ ICE_PTT_UNUSED_ENTRY (0 ),ICE_PTT (1 ,L2 ,NONE ,NOF ,NONE ,NONE ,NOF ,NONE ,PAY2 ), -ICE_PTT (2 ,L2 ,NONE ,NOF ,NONE ,NONE ,NOF ,NONE ,NONE ), +ICE_PTT_UNUSED_ENTRY (2 ),ICE_PTT_UNUSED_ENTRY (3 ),ICE_PTT_UNUSED_ENTRY (4 ), ICE_PTT_UNUSED_ENTRY(5),
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 87/215 mt76: mt7615: fix fixed-rate tx status reporting
In reply to Greg Kroah-HartmanFrom: Felix Fietkau <[email protected]>
[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]
Rely on the txs fixed-rate bit instead of info->control.rates
--- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7615/mac.c +4 -6
@@ -1177,22 +1177,20 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,int first_idx =0 , last_idx;int i, idx, count;bool fixed_rate, ack_timeout; -bool probe, ampdu, cck = false; +bool ampdu, cck = false;bool rs_idx;u32 rate_set_tsf;u32 final_rate, final_rate_flags, final_nss, txs; - fixed_rate = info->status.rates[0 ].count; - probe = !!(info->flags &IEEE80211_TX_CTL_RATE_CTRL_PROBE ); - txs =le32_to_cpu (txs_data[1 ]); - ampdu = !fixed_rate && (txs &MT_TXS1_AMPDU ); + ampdu = txs &MT_TXS1_AMPDU ; txs =le32_to_cpu (txs_data[3 ]); count =FIELD_GET (MT_TXS3_TX_COUNT , txs); last_idx =FIELD_GET (MT_TXS3_LAST_TX_RATE , txs); txs =le32_to_cpu (txs_data[0 ]); + fixed_rate = txs &MT_TXS0_FIXED_RATE ; final_rate =FIELD_GET (MT_TXS0_TX_RATE , txs); ack_timeout = txs &MT_TXS0_ACK_TIMEOUT ;
@@ -1214,7 +1212,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta, first_idx =max_t (int,0 , last_idx - (count -1 ) /MT7615_RATE_RETRY ); -if (fixed_rate && !probe) { +if (fixed_rate) { info->status.rates[0 ].count = count; i =0 ; goto out;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 88/215 net: fix mistake path for netdev_features_strings
In reply to Greg Kroah-HartmanFrom: Jian Shen <[email protected]>
[ Upstream commit 2d8ea148e553e1dd4e80a87741abdfb229e2b323 ]
Th_strings arrays netdev_features_strings, tunable_strings, and phy_tunable_strings has been moved to file net/ethtool/common.c. So fixes the comment.
--- include/linux/netdev_features.h | 2 +- include/uapi/linux/ethtool.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
include/linux/netdev_features.h +1 -1
@@ -87,7 +87,7 @@ enum {/* * Add your fresh new feature above and remember to update -* netdev_features_strings[] in net/core/ethtool.c and maybe +* netdev_features_strings[] in net/ethtool/common.c and maybe * some feature mask #defines below. Please also describe it * in Documentation/networking/netdev-features.rst. */
include/uapi/linux/ethtool.h +2 -2
@@ -223,7 +223,7 @@ enum tunable_id {ETHTOOL_PFC_PREVENTION_TOUT ,/* timeout in msecs */ /* * Add your fresh new tunable attribute above and remember to update -* tunable_strings[] in net/core/ethtool.c +* tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_TUNABLE_COUNT, };
@@ -287,7 +287,7 @@ enum phy_tunable_id {ETHTOOL_PHY_EDPD ,/* * Add your fresh new phy tunable attribute above and remember to update -* phy_tunable_strings[] in net/core/ethtool.c +* phy_tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_PHY_TUNABLE_COUNT, };
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 89/215 net: ipa: Add missing of_node_put() in ipa_firmware_load()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit b244163f2c45c12053cb0291c955f892e79ed8a9 ]
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. of_node_put() on it before exiting this function.
--- drivers/net/ipa/ipa_main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ipa/ipa_main.c +1 -0
@@ -589,6 +589,7 @@ static int ipa_firmware_load(struct device *dev) } ret =of_address_to_resource (node,0 , &res); +of_node_put (node);if (ret) {dev_err (dev,"error %d getting \"memory-region\" resource\n" , ret);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 90/215 net: sched: fix error return code in tcf_del_walker()
In reply to Greg Kroah-HartmanFrom: Yang Yingliang <[email protected]>
[ Upstream commit 55d96f72e8ddc0a294e0b9c94016edbb699537e1 ]
When nla_put_u32() fails, 'ret' could be 0, it should return error code in tcf_del_walker().
--- net/sched/act_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/sched/act_api.c +2 -1
@@ -333,7 +333,8 @@ static int tcf_del_walker(struct tcf_idrinfo *idrinfo, struct sk_buff *skb, }mutex_unlock (&idrinfo->lock); -if (nla_put_u32 (skb,TCA_FCNT , n_i)) + ret =nla_put_u32 (skb,TCA_FCNT , n_i); +if (ret) goto nla_put_failure;nla_nest_end (skb, nest);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 91/215 io_uring: fix false WARN_ONCE
In reply to Greg Kroah-HartmanFrom: Pavel Begunkov <[email protected]>
[ Upstream commit e6ab8991c5d0b0deae0961dc22c0edd1dee328f5 ]
WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_wake_worker fs/io-wq.c:244 [inline] WARNING: CPU: 1 PID: 11749 at fs/io-wq.c:244 io_wqe_enqueue+0x7f6/0x910 fs/io-wq.c:751
A WARN_ON_ONCE() in io_wqe_wake_worker() can be triggered by a valid userspace setup. Replace it with pr_warn.
--- fs/io-wq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
fs/io-wq.c +4 -1
@@ -299,7 +299,8 @@ static void io_wqe_wake_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)* Most likely an attempt to queue unbounded work on an io_wq that * wasn't setup with any unbounded workers. */ -WARN_ON_ONCE (!acct->max_workers); +if (unlikely (!acct->max_workers)) +pr_warn_once ("io-wq is not configured for unbound workers" );rcu_read_lock (); ret =io_wqe_activate_free_worker (wqe);
@@ -1085,6 +1086,8 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)if (WARN_ON_ONCE (!data->free_work || !data->do_work))return ERR_PTR (-EINVAL ); +if (WARN_ON_ONCE (!bounded)) +return ERR_PTR (-EINVAL ); wq =kzalloc (sizeof (*wq),GFP_KERNEL );if (!wq)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 92/215 drm/amdgpu: fix bad address translation for sienna_cichlid
In reply to Greg Kroah-HartmanFrom: Stanley.Yang <[email protected]>
[ Upstream commit 6ec598cc9dfbf40433e94a2ed1a622e3ef80268b ]
--- drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h | 5 +++++ drivers/gpu/drm/amd/amdgpu/umc_v8_7.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_umc.h +5 -0
@@ -21,6 +21,11 @@#ifndef __AMDGPU_UMC_H__#define __AMDGPU_UMC_H__ +/* +* (addr / 256) * 4096, the higher 26 bits in ErrorAddr +* is the index of 4KB block +*/ +#define ADDR_OF_4KB_BLOCK (addr) (((addr) & ~0xffULL) << 4)/* * (addr / 256) * 8192, the higher 26 bits in ErrorAddr * is the index of 8KB block
drivers/gpu/drm/amd/amdgpu/umc_v8_7.c +1 -1
@@ -233,7 +233,7 @@ static void umc_v8_7_query_error_address(struct amdgpu_device *adev, err_addr &= ~((0x1ULL << lsb) -1 );/* translate umc channel address to soc pa, 3 parts are included */ - retired_page =ADDR_OF_8KB_BLOCK (err_addr) | + retired_page =ADDR_OF_4KB_BLOCK (err_addr) |ADDR_OF_256B_BLOCK (channel_index) |OFFSET_IN_256B_BLOCK (err_addr);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 93/215 drm/amdkfd: Walk through list with dqm lock hold
In reply to Greg Kroah-HartmanFrom: xinhui pan <[email protected]>
[ Upstream commit 56f221b6389e7ab99c30bbf01c71998ae92fc584 ]
To avoid any list corruption.
--- .../drm/amd/amdkfd/kfd_device_queue_manager.c | 22 ++++++++++--------- 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +12 -10
@@ -1712,7 +1712,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, struct qcm_process_device *qpd) {int retval; -struct queue *q, *next; +struct queue *q;struct kernel_queue *kq, *kq_next;struct mqd_manager *mqd_mgr;struct device_process_node *cur, *next_dpn;
@@ -1769,24 +1769,26 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, qpd->reset_wavefronts = false; } -dqm_unlock (dqm); - -/* Outside the DQM lock because under the DQM lock we can't do -* reclaim or take other locks that others hold while reclaiming. -*/ -if (found) -kfd_dec_compute_active (dqm->dev); -/* Lastly, free mqd resources. * Do free_mqd() after dqm_unlock to avoid circular locking. */ -list_for_each_entry_safe (q, next, &qpd->queues_list, list) { +while (!list_empty (&qpd->queues_list)) { + q = list_first_entry(&qpd->queues_list, struct queue, list); mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type ( q->properties.type)];list_del (&q->list); qpd->queue_count--; +dqm_unlock (dqm); mqd_mgr->free_mqd (mqd_mgr, q->mqd, q->mqd_mem_obj); +dqm_lock (dqm); } +dqm_unlock (dqm); + +/* Outside the DQM lock because under the DQM lock we can't do +* reclaim or take other locks that others hold while reclaiming. +*/ +if (found) +kfd_dec_compute_active (dqm->dev);return retval; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 94/215 mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode
In reply to Greg Kroah-HartmanFrom: Ryder Lee <[email protected]>
[ Upstream commit 2707ff4dd7b1479dbd44ebb3c74788084cc95245 ]
The value of station mode is always 0.
Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities")
--- drivers/net/wireless/mediatek/mt76/mt7915/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7915/init.c +3 -3
@@ -335,6 +335,9 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,if (nss <2 )return ; +/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */ + elem->phy_cap_info[7 ] |=min_t (int, nss -1 ,2 ) <<3 ; +if (vif !=NL80211_IFTYPE_AP )return ;
@@ -348,9 +351,6 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap, c =IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB |IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB ; elem->phy_cap_info[6 ] |= c; - -/* the maximum cap is 4 x 3, (Nr, Nc) = (3, 2) */ - elem->phy_cap_info[7 ] |=min_t (int, nss -1 ,2 ) <<3 ; } static void
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 95/215 rtl8xxxu: Fix device info for RTL8192EU devices
In reply to Greg Kroah-HartmanFrom: Pascal Terjan <[email protected]>
[ Upstream commit c240b044edefa3c3af4014a4030e017dd95b59a1 ]
Based on 2001:3319 and 2357:0109 which I used to test the fix and 0bda:818b and 2357:0108 for which I found efuse dumps online.
== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.
== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.
--- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 11 +--- .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 59 +++++++++++++++++-- 2 files changed, 56 insertions(+), 14 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +3 -8
@@ -853,15 +853,10 @@ struct rtl8192eu_efuse {u8 usb_optional_function;u8 res9[2 ];u8 mac_addr[ETH_ALEN ];/* 0xd7 */ -u8 res10[2 ]; -u8 vendor_name[7 ]; -u8 res11[2 ]; -u8 device_name[0x0b ];/* 0xe8 */ -u8 res12[2 ]; -u8 serial[0x0b ];/* 0xf5 */ -u8 res13[0x30 ]; +u8 device_info[80 ]; +u8 res11[3 ];u8 unknown[0x0d ];/* 0x130 */ -u8 res14[0xc3 ]; +u8 res12[0xc3 ]; };struct rtl8xxxu_reg8val {
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +53 -6
74 lines not on this page · raw message
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 96/215 MIPS: add PMD table accounting into MIPSpmd_alloc_one
In reply to Greg Kroah-HartmanFrom: Huang Pei <[email protected]>
[ Upstream commit ed914d48b6a1040d1039d371b56273d422c0081e ]
This fixes Page Table accounting bug.
MIPS is the ONLY arch just defining __HAVE_ARCH_PMD_ALLOC_ONE alone. Since commit b2b29d6d011944 (mm: account PMD tables like PTE tables), "pmd_free" in asm-generic with PMD table accounting and "pmd_alloc_one" in MIPS without PMD table accounting causes PageTable accounting number negative, which read by global_zone_page_state(), always returns 0.
--- arch/mips/include/asm/pgalloc.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
arch/mips/include/asm/pgalloc.h +7 -3
@@ -59,11 +59,15 @@ do { \static inline pmd_t *pmd_alloc_one (struct mm_struct *mm,unsigned long address) { -pmd_t *pmd; +pmd_t *pmd =NULL ; +struct page *pg; - pmd = (pmd_t *)__get_free_pages (GFP_KERNEL ,PMD_ORDER ); -if (pmd) + pg =alloc_pages (GFP_KERNEL | __GFP_ACCOUNT,PMD_ORDER ); +if (pg) { +pgtable_pmd_page_ctor (pg); + pmd = (pmd_t *)page_address (pg);pmd_init ((unsigned long )pmd, (unsigned long )invalid_pte_table); + }return pmd; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 97/215 net: fec: add ndo_select_queue to fix TX bandwidth fluctuations
In reply to Greg Kroah-HartmanFrom: Fugang Duan <[email protected]>
[ Upstream commit 52c4a1a85f4b346c39c896c0168f4a843b3385ff ]
As we know that AVB is enabled by default, and the ENET IP design is queue 0 for best effort, queue 1&2 for AVB Class A&B. Bandwidth of each queue 1&2 set in driver is 50%, TX bandwidth fluctuated when selecting tx queues randomly with FEC_QUIRK_HAS_AVB quirk available.
This patch adds ndo_select_queue callback to select queues for transmitting to fix this issue. It will always return queue 0 if this is not a vlan packet, and return queue 1 or 2 based on priority of vlan packet.
You may complain that in fact we only use single queue for trasmitting if we are not targeted to VLAN. Yes, but seems we have no choice, since AVB is enabled when the driver probed, we can't switch this feature dynamicly. After compare multiple queues to single queue, TX throughput almost no improvement.
One way we can implemet is to configure the driver to multiple queues with Round-robin scheme by default. Then add ndo_setup_tc callback to enable/disable AVB feature for users. Unfortunately, ENET AVB IP seems not follow the standard 802.1Qav spec. We only can program DMAnCFG[IDLE_SLOPE] field to calculate bandwidth fraction. And idle slope is restricted to certain valus (a total of 19). It's far away from CBS QDisc implemented in Linux TC framework. If you strongly suggest to do this, I think we only can support limited numbers of bandwidth and reject others, but it's really urgly and wried.
With this patch, VLAN tagged packets route to queue 0/1/2 based on vlan priority; VLAN untagged packets route to queue 0.
--- drivers/net/ethernet/freescale/fec_main.c | 32 +++++++++++++++++++++++ 1 file changed, 32 insertions(+)
drivers/net/ethernet/freescale/fec_main.c +32 -0
@@ -75,6 +75,8 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);#define DRIVER_NAME "fec" +static const u16 fec_enet_vlan_pri_to_queue[8 ] = {0 ,0 ,1 ,1 ,1 ,2 ,2 ,2 }; +/* Pause frame feild and FIFO threshold */ #define FEC_ENET_FCE (1 << 5)#define FEC_ENET_RSEM_V 0x84
@@ -3222,10 +3224,40 @@ static int fec_set_features(struct net_device *netdev,return 0 ; } +static u16 fec_enet_get_raw_vlan_tci (struct sk_buff *skb) +{ +struct vlan_ethhdr *vhdr; +unsigned short vlan_TCI =0 ; + +if (skb->protocol ==htons (ETH_P_ALL )) { + vhdr = (struct vlan_ethhdr *)(skb->data); + vlan_TCI =ntohs (vhdr->h_vlan_TCI); + } + +return vlan_TCI; +} + +static u16 fec_enet_select_queue (struct net_device *ndev,struct sk_buff *skb, +struct net_device *sb_dev) +{ +struct fec_enet_private *fep =netdev_priv (ndev); +u16 vlan_tag; + +if (!(fep->quirks &FEC_QUIRK_HAS_AVB )) +return netdev_pick_tx (ndev, skb,NULL ); + + vlan_tag =fec_enet_get_raw_vlan_tci (skb); +if (!vlan_tag) +return vlan_tag; + +return fec_enet_vlan_pri_to_queue[vlan_tag >>13 ]; +} +static const struct net_device_ops fec_netdev_ops = { .ndo_open = fec_enet_open, .ndo_stop = fec_enet_close, .ndo_start_xmit = fec_enet_start_xmit, + .ndo_select_queue = fec_enet_select_queue, .ndo_set_rx_mode = set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = fec_timeout,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 98/215 atm: nicstar: use dma_free_coherent instead of kfree
In reply to Greg Kroah-HartmanFrom: Zheyu Ma <[email protected]>
[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for error handling, but the correct memory free function should be used, otherwise it will cause an error. Since 'card->rsq.org' and 'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they should be freed using 'dma_free_coherent'.
Fix this by using 'dma_free_coherent' instead of 'kfree'
This log reveals it:
[ 3.440294] kernel BUG at mm/slub.c:4206! [ 3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141 [ 3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.442780] RIP: 0010:kfree+0x26a/0x300 [ 3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.443396] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.443396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.443396] Call Trace: [ 3.443396] ns_init_card_error+0x12c/0x220 [ 3.443396] nicstar_init_one+0x10d2/0x1130 [ 3.443396] local_pci_probe+0x4a/0xb0 [ 3.443396] pci_device_probe+0x126/0x1d0 [ 3.443396] ? pci_device_remove+0x100/0x100 [ 3.443396] really_probe+0x27e/0x650 [ 3.443396] driver_probe_device+0x84/0x1d0 [ 3.443396] ? mutex_lock_nested+0x16/0x20 [ 3.443396] device_driver_attach+0x63/0x70 [ 3.443396] __driver_attach+0x117/0x1a0 [ 3.443396] ? device_driver_attach+0x70/0x70 [ 3.443396] bus_for_each_dev+0xb6/0x110 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] driver_attach+0x22/0x30 [ 3.443396] bus_add_driver+0x1e6/0x2a0 [ 3.443396] driver_register+0xa4/0x180 [ 3.443396] __pci_register_driver+0x77/0x80 [ 3.443396] ? uPD98402_module_init+0xd/0xd [ 3.443396] nicstar_init+0x1f/0x75 [ 3.443396] do_one_initcall+0x7a/0x3d0 [ 3.443396] ? rdinit_setup+0x40/0x40 [ 3.443396] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.443396] kernel_init_freeable+0x2a7/0x2f9 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] kernel_init+0x13/0x180 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ? rest_init+0x2c0/0x2c0 [ 3.443396] ret_from_fork+0x1f/0x30 [ 3.443396] Modules linked in: [ 3.443396] Dumping ftrace buffer: [ 3.443396] (ftrace buffer empty) [ 3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]--- [ 3.458922] RIP: 0010:kfree+0x26a/0x300 [ 3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0 [ 3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246 [ 3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000 [ 3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6 [ 3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001 [ 3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000 [ 3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160 [ 3.463368] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 3.463949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.465860] Kernel panic - not syncing: Fatal exception [ 3.466370] Dumping ftrace buffer: [ 3.466616] (ftrace buffer empty) [ 3.466871] Kernel Offset: disabled [ 3.467122] Rebooting in 1 seconds..
--- drivers/atm/nicstar.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/atm/nicstar.c +4 -2
@@ -837,10 +837,12 @@ static void ns_init_card_error(ns_dev *card, int error)dev_kfree_skb_any (hb); }if (error >=12 ) { -kfree (card->rsq.org); +dma_free_coherent (&card->pcidev->dev,NS_RSQSIZE +NS_RSQ_ALIGNMENT , + card->rsq.org, card->rsq.dma); }if (error >=11 ) { -kfree (card->tsq.org); +dma_free_coherent (&card->pcidev->dev,NS_TSQSIZE +NS_TSQ_ALIGNMENT , + card->tsq.org, card->tsq.dma); }if (error >=10 ) {free_irq (card->pcidev->irq, card);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 99/215 atm: nicstar: register the interrupt handler in the right place
In reply to Greg Kroah-HartmanFrom: Zheyu Ma <[email protected]>
[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]
Because the error handling is sequential, the application of resources should be carried out in the order of error handling, so the operation of registering the interrupt handler should be put in front, so as not to free the unregistered interrupt handler during error handling.
This log reveals it:
[ 3.438724] Trying to free already-free IRQ 23 [ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480 [ 3.440039] Modules linked in: [ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.441561] RIP: 0010:free_irq+0xfb/0x480 [ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000 [ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0 [ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.444994] Call Trace: [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Kernel panic - not syncing: panic_on_warn set ... [ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142 [ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.444994] Call Trace: [ 3.444994] dump_stack+0xba/0xf5 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] panic+0x155/0x3ed [ 3.444994] ? __warn+0xed/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] __warn+0x103/0x150 [ 3.444994] ? free_irq+0xfb/0x480 [ 3.444994] report_bug+0x119/0x1c0 [ 3.444994] handle_bug+0x3b/0x80 [ 3.444994] exc_invalid_op+0x18/0x70 [ 3.444994] asm_exc_invalid_op+0x12/0x20 [ 3.444994] RIP: 0010:free_irq+0xfb/0x480 [ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80 [ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086 [ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000 [ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff [ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003 [ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8 [ 3.444994] ? vprintk_func+0x71/0x110 [ 3.444994] ns_init_card_error+0x18e/0x250 [ 3.444994] nicstar_init_one+0x10d2/0x1130 [ 3.444994] local_pci_probe+0x4a/0xb0 [ 3.444994] pci_device_probe+0x126/0x1d0 [ 3.444994] ? pci_device_remove+0x100/0x100 [ 3.444994] really_probe+0x27e/0x650 [ 3.444994] driver_probe_device+0x84/0x1d0 [ 3.444994] ? mutex_lock_nested+0x16/0x20 [ 3.444994] device_driver_attach+0x63/0x70 [ 3.444994] __driver_attach+0x117/0x1a0 [ 3.444994] ? device_driver_attach+0x70/0x70 [ 3.444994] bus_for_each_dev+0xb6/0x110 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] driver_attach+0x22/0x30 [ 3.444994] bus_add_driver+0x1e6/0x2a0 [ 3.444994] driver_register+0xa4/0x180 [ 3.444994] __pci_register_driver+0x77/0x80 [ 3.444994] ? uPD98402_module_init+0xd/0xd [ 3.444994] nicstar_init+0x1f/0x75 [ 3.444994] do_one_initcall+0x7a/0x3d0 [ 3.444994] ? rdinit_setup+0x40/0x40 [ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70 [ 3.444994] kernel_init_freeable+0x2a7/0x2f9 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] kernel_init+0x13/0x180 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ? rest_init+0x2c0/0x2c0 [ 3.444994] ret_from_fork+0x1f/0x30 [ 3.444994] Dumping ftrace buffer: [ 3.444994] (ftrace buffer empty) [ 3.444994] Kernel Offset: disabled [ 3.444994] Rebooting in 1 seconds..
--- drivers/atm/nicstar.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/atm/nicstar.c +9 -9
@@ -525,6 +525,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */ writel (0x00000000 , card->membase +VPM ); + card->intcnt =0 ; +if (request_irq + (pcidev->irq, &ns_irq_handler,IRQF_SHARED ,"nicstar" , card) !=0 ) { +pr_err ("nicstar%d: can't allocate IRQ %d.\n" , i, pcidev->irq); + error =9 ; +ns_init_card_error (card, error); +return error; + } +/* Initialize TSQ */ card->tsq.org = dma_alloc_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -751,15 +760,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev) card->efbie =1 ; - card->intcnt =0 ; -if (request_irq - (pcidev->irq, &ns_irq_handler,IRQF_SHARED ,"nicstar" , card) !=0 ) { -printk ("nicstar%d: can't allocate IRQ %d.\n" , i, pcidev->irq); - error =9 ; -ns_init_card_error (card, error); -return error; - } -/* Register device */ card->atmdev =atm_dev_register ("nicstar" , &card->pcidev->dev, &atm_ops,-1 ,NULL );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 100/215 vsock: notify server to shutdown when client has pending signal
In reply to Greg Kroah-HartmanFrom: Longpeng(Mike) <[email protected]>
[ Upstream commit c7ff9cff70601ea19245d997bb977344663434c7 ]
The client's sk_state will be set to TCP_ESTABLISHED if the server replay the client's connect request.
However, if the client has pending signal, its sk_state will be set to TCP_CLOSE without notify the server, so the server will hold the corrupt connection.
client server
1. sk_state=TCP_SYN_SENT |
2. call ->connect() |
3. wait reply |
| 4. sk_state=TCP_ESTABLISHED
| 5. insert to connected list
| 6. reply to the client
7. sk_state=TCP_ESTABLISHED |
8. insert to connected list |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE |
client is exiting... |
11. call ->release() |
virtio_transport_close
if (!(sk->sk_state == TCP_ESTABLISHED ||
sk->sk_state == TCP_CLOSING))
return true; *return at here, the server cannot notice the connection is corrupt*So the client should notify the peer in this case.
--- net/vmw_vsock/af_vsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/vmw_vsock/af_vsock.c +1 -1
@@ -1352,7 +1352,7 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,if (signal_pending (current)) { err =sock_intr_errno (timeout); - sk->sk_state =TCP_CLOSE ; + sk->sk_state = sk->sk_state ==TCP_ESTABLISHED ?TCP_CLOSING :TCP_CLOSE ; sock->state =SS_UNCONNECTED ;vsock_transport_cancel_pkt (vsk); goto out_wait;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 101/215 RDMA/rxe: Dont overwrite errno from ib_umem_get()
In reply to Greg Kroah-HartmanFrom: Xiao Yang <[email protected]>
[ Upstream commit 20ec0a6d6016aa28b9b3299be18baef1a0f91cd2 ]
rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get() fails so it's hard for user to know which actual error happens in ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when trying to pin pages on a DAX file.
Return actual error as mlx4/mlx5 does.
--- drivers/infiniband/sw/rxe/rxe_mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_mr.c +1 -1
@@ -139,7 +139,7 @@ int rxe_mem_init_user(struct rxe_pd *pd, u64 start,if (IS_ERR (umem)) {pr_warn ("err %d from rxe_umem_get\n" , (int )PTR_ERR (umem)); - err = -EINVAL ; + err =PTR_ERR (umem); goto err1; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 102/215 iwlwifi: mvm: dont change band on bound PHY contexts
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]
When we have a P2P Device active, we attempt to only change the PHY context it uses when we get a new remain-on-channel, if the P2P Device is the only user of the PHY context.
This is fine if we're switching within a band, but if we're switching bands then the switch implies a removal and re-add of the PHY context, which isn't permitted by the firmware while it's bound to an interface.
Fix the code to skip the unbind/release/... cycle only if the band doesn't change (or we have old devices that can switch the band on the fly as well.)
--- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 ++++++++++++++----- 1 file changed, 18 insertions(+), 6 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +18 -6
@@ -3794,6 +3794,7 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,struct iwl_mvm_vif *mvmvif =iwl_mvm_vif_from_mac80211 (vif);struct cfg80211_chan_def chandef;struct iwl_mvm_phy_ctxt *phy_ctxt; +bool band_change_removal;int ret, i; IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
@@ -3874,19 +3875,30 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,cfg80211_chandef_create (&chandef, channel,NL80211_CHAN_NO_HT );/* -* Change the PHY context configuration as it is currently referenced -* only by the P2P Device MAC +* Check if the remain-on-channel is on a different band and that +* requires context removal, see iwl_mvm_phy_ctxt_changed(). If +* so, we'll need to release and then re-configure here, since we +* must not remove a PHY context that's part of a binding. */ -if (mvmvif->phy_ctxt->ref ==1 ) { + band_change_removal = +fw_has_capa (&mvm->fw->ucode_capa, +IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT ) && + mvmvif->phy_ctxt->channel->band != chandef.chan->band; + +if (mvmvif->phy_ctxt->ref ==1 && !band_change_removal) { +/* +* Change the PHY context configuration as it is currently +* referenced only by the P2P Device MAC (and we can modify it) +*/ ret =iwl_mvm_phy_ctxt_changed (mvm, mvmvif->phy_ctxt, &chandef,1 ,1 );if (ret) goto out_unlock; }else {/* -* The PHY context is shared with other MACs. Need to remove the -* P2P Device from the binding, allocate an new PHY context and -* create a new binding +* The PHY context is shared with other MACs (or we're trying to +* switch bands), so remove the P2P Device from the binding, +* allocate an new PHY context and create a new binding. */ phy_ctxt =iwl_mvm_get_free_phy_ctxt (mvm);if (!phy_ctxt) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 103/215 iwlwifi: mvm: fix error print when session protection ends
In reply to Greg Kroah-HartmanFrom: Shaul Triebitz <[email protected]>
[ Upstream commit 976ac0af7ba2c5424bc305b926c0807d96fdcc83 ]
When the session protection ends and the Driver is not associated or a beacon was not heard, the Driver prints "No beacons heard...".
That's confusing for the case where not associated. Change the print when not associated to "Not associated...".
--- drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/wireless/intel/iwlwifi/mvm/time-event.c +4 -0
@@ -345,6 +345,8 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,* and know the dtim period. */ iwl_mvm_te_check_disconnect (mvm, te_data->vif, + !te_data->vif->bss_conf.assoc ? +"Not associated and the time event is over already..." :"No beacon heard and the time event is over already..." );break ;default :
@@ -843,6 +845,8 @@ void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm,* and know the dtim period. */ iwl_mvm_te_check_disconnect (mvm, vif, + !vif->bss_conf.assoc ? +"Not associated and the session protection is over already..." :"No beacon heard and the session protection is over already..." );spin_lock_bh (&mvm->time_event_lock);iwl_mvm_te_clear_data (mvm, te_data);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 104/215 iwlwifi: pcie: free IML DMA memory allocation
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]
In the case of gen3 devices with image loader (IML) support, we were leaking the IML DMA allocation and never freeing it. Fix that.
--- .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 15 ++++++++++----- .../net/wireless/intel/iwlwifi/pcie/internal.h | 3 +++ 2 files changed, 13 insertions(+), 5 deletions(-)
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c +10 -5
@@ -126,7 +126,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,struct iwl_prph_scratch *prph_scratch;struct iwl_prph_scratch_ctrl_cfg *prph_sc_ctrl;struct iwl_prph_info *prph_info; -void *iml_img;u32 control_flags =0 ;int ret; int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
@@ -234,14 +233,15 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, trans_pcie->prph_scratch = prph_scratch;/* Allocate IML */ - iml_img =dma_alloc_coherent (trans->dev, trans->iml_len, - &trans_pcie->iml_dma_addr,GFP_KERNEL ); -if (!iml_img) { + trans_pcie->iml =dma_alloc_coherent (trans->dev, trans->iml_len, + &trans_pcie->iml_dma_addr, +GFP_KERNEL ); +if (!trans_pcie->iml) { ret = -ENOMEM ; goto err_free_ctxt_info; } -memcpy (iml_img, trans->iml, trans->iml_len); +memcpy (trans_pcie->iml, trans->iml, trans->iml_len);iwl_enable_fw_load_int_ctx_info (trans);
@@ -290,6 +290,11 @@ void iwl_pcie_ctxt_info_gen3_free(struct iwl_trans *trans) trans_pcie->ctxt_info_dma_addr =0 ; trans_pcie->ctxt_info_gen3 =NULL ; +dma_free_coherent (trans->dev, trans->iml_len, trans_pcie->iml, + trans_pcie->iml_dma_addr); + trans_pcie->iml_dma_addr =0 ; + trans_pcie->iml =NULL ; +iwl_pcie_ctxt_info_free_fw_img (trans); dma_free_coherent(trans->dev, sizeof(*trans_pcie->prph_scratch),
drivers/net/wireless/intel/iwlwifi/pcie/internal.h +3 -0
@@ -336,6 +336,8 @@ struct cont_rec {* Context information addresses will be taken from here. * This is driver's local copy for keeping track of size and * count for allocating and freeing the memory. +* @iml: image loader image virtual address +* @iml_dma_addr: image loader image DMA address * @trans: pointer to the generic transport area * @scd_base_addr: scheduler sram base address in SRAM * @kw: keep warm address
@@ -388,6 +390,7 @@ struct iwl_trans_pcie { };struct iwl_prph_info *prph_info;struct iwl_prph_scratch *prph_scratch; +void *iml;dma_addr_t ctxt_info_dma_addr;dma_addr_t prph_info_dma_addr;dma_addr_t prph_scratch_dma_addr;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 105/215 iwlwifi: pcie: fix context info freeing
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]
After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called to free the context info. However, on gen3 that will then free the context info with the wrong size.
Since we free this allocation later, let it stick around until the device is stopped for now, freeing some of it earlier is a separate change.
--- drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +2 -1
@@ -269,7 +269,8 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr)/* now that we got alive we can free the fw image & the context info. * paging memory cannot be freed included since FW will still use it */ -iwl_pcie_ctxt_info_free (trans); +if (trans->trans_cfg->device_family <IWL_DEVICE_FAMILY_AX210 ) +iwl_pcie_ctxt_info_free (trans);/* * Re-enable all the interrupts, including the RF-Kill one, now that
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 106/215 sfc: avoid double pci_remove of VFs
In reply to Greg Kroah-HartmanFrom: Íñigo Huguet <[email protected]>
[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]
If pci_remove was called for a PF with VFs, the removal of the VFs was called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove and another implicit by calling pci_disable_sriov, which also perform the VFs remove. This was leading to crashing the kernel on the second attempt.
Given that pci_disable_sriov already calls to pci remove function, get rid of the direct call to pci_driver->remove from the driver.
2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove
Removing sfc module does not trigger the error, at least for me, because it removes the VF first, and then the PF.
Example of a log with the error:
list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:47!
[...trimmed...]
RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
[...trimmed...]
Call Trace:
efx_dissociate+0x1f/0x140 [sfc]
efx_pci_remove+0x27/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
pci_stop_bus_device+0x69/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pci_iov_remove_virtfn+0xba/0x120
sriov_disable+0x2f/0xe0
efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
? pcie_aer_is_native+0x12/0x40
efx_ef10_sriov_fini+0x72/0x110 [sfc]
efx_pci_remove+0x62/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
unbind_store+0xf6/0x130
kernfs_fop_write+0x116/0x190
vfs_write+0xa5/0x1a0
ksys_write+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca--- drivers/net/ethernet/sfc/ef10_sriov.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
drivers/net/ethernet/sfc/ef10_sriov.c +1 -9
@@ -439,7 +439,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx)void efx_ef10_sriov_fini (struct efx_nic *efx) {struct efx_ef10_nic_data *nic_data = efx->nic_data; -unsigned int i;int rc;if (!nic_data->vf) {
@@ -449,14 +448,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx)return ; } -/* Remove any VFs in the host */ -for (i =0 ; i < efx->vf_count; ++i) { -struct efx_nic *vf_efx = nic_data->vf[i].efx; - -if (vf_efx) - vf_efx->pci_dev->driver->remove (vf_efx->pci_dev); - } - +/* Disable SRIOV and remove any VFs in the host */ rc =efx_ef10_pci_sriov_disable (efx, true);if (rc) netif_dbg(efx, drv, efx->net_dev,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 107/215 sfc: error code if SRIOV cannot be disabled
In reply to Greg Kroah-HartmanFrom: Íñigo Huguet <[email protected]>
[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]
If SRIOV cannot be disabled during device removal or module unloading, return error code so it can be logged properly in the calling function.
Note that this can only happen if any VF is currently attached to a guest using Xen, but not with vfio/KVM. Despite that in that case the VFs won't work properly with PF removed and/or the module unloaded, I have let it as is because I don't know what side effects may have changing it, and also it seems to be the same that other drivers are doing in this situation.
In the case of being called during SRIOV reconfiguration, the behavior hasn't changed because the function is called with force=false.
--- drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/net/ethernet/sfc/ef10_sriov.c +11 -4
@@ -402,12 +402,17 @@ fail1:return rc; } +/* Disable SRIOV and remove VFs +* If some VFs are attached to a guest (using Xen, only) nothing is +* done if force=false, and vports are freed if force=true (for the non +* attachedc ones, only) but SRIOV is not disabled and VFs are not +* removed in either case. +*/ static int efx_ef10_pci_sriov_disable (struct efx_nic *efx,bool force) {struct pci_dev *dev = efx->pci_dev; -unsigned int vfs_assigned =0 ; - - vfs_assigned =pci_vfs_assigned (dev); +unsigned int vfs_assigned =pci_vfs_assigned (dev); +int rc =0 ;if (vfs_assigned && !force) { netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -417,10 +422,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)if (!vfs_assigned)pci_disable_sriov (dev); +else + rc = -EBUSY ;efx_ef10_sriov_free_vf_vswitching (efx); efx->vf_count =0 ; -return 0 ; +return rc; }int efx_ef10_sriov_configure (struct efx_nic *efx,int num_vfs)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 108/215 wireless: wext-spy: Fix out-of-bounds warning
In reply to Greg Kroah-HartmanFrom: Gustavo A. R. Silva <[email protected]>
[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &threshold.low and &spydata->spy_thr_low. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
--- net/wireless/wext-spy.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
net/wireless/wext-spy.c +7 -7
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device * dev,return -EOPNOTSUPP ;/* Just do it */ -memcpy (&(spydata->spy_thr_low), &(threshold->low), -2 *sizeof (struct iw_quality )); + spydata->spy_thr_low = threshold->low; + spydata->spy_thr_high = threshold->high;/* Clear flag */ memset (spydata->spy_thr_under,'\0' ,sizeof (spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device * dev,return -EOPNOTSUPP ;/* Just do it */ -memcpy (&(threshold->low), &(spydata->spy_thr_low), -2 *sizeof (struct iw_quality )); + threshold->low = spydata->spy_thr_low; + threshold->high = spydata->spy_thr_high;return 0 ; }
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device * dev,memcpy (threshold.addr.sa_data, address,ETH_ALEN ); threshold.addr.sa_family =ARPHRD_ETHER ;/* Copy stats */ -memcpy (&(threshold.qual), wstats,sizeof (struct iw_quality )); + threshold.qual = *wstats;/* Copy also thresholds */ -memcpy (&(threshold.low), &(spydata->spy_thr_low), -2 *sizeof (struct iw_quality )); + threshold.low = spydata->spy_thr_low; + threshold.high = spydata->spy_thr_high;/* Send event to user space */ wireless_send_event (dev,SIOCGIWTHRSPY , &wrqu, (char *) &threshold);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 109/215 cfg80211: fix default HE tx bitrate mask in 2G band
In reply to Greg Kroah-HartmanFrom: Ping-Ke Shih <[email protected]>
[ Upstream commit 9df66d5b9f45c39b3925d16e8947cc10009b186d ]
In 2G band, a HE sta can only supports HT and HE, but not supports VHT. In this case, default HE tx bitrate mask isn't filled, when we use iw to set bitrates without any parameter.
--- net/wireless/nl80211.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
net/wireless/nl80211.c +4 -5
@@ -4625,11 +4625,10 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info, sband->ht_cap.mcs.rx_mask, sizeof(mask->control[i].ht_mcs)); -if (!sband->vht_cap.vht_supported) -continue ; - - vht_tx_mcs_map =le16_to_cpu (sband->vht_cap.vht_mcs.tx_mcs_map); -vht_build_mcs_mask (vht_tx_mcs_map, mask->control[i].vht_mcs); +if (sband->vht_cap.vht_supported) { + vht_tx_mcs_map =le16_to_cpu (sband->vht_cap.vht_mcs.tx_mcs_map); +vht_build_mcs_mask (vht_tx_mcs_map, mask->control[i].vht_mcs); + } he_cap =ieee80211_get_he_iftype_cap (sband, wdev->iftype);if (!he_cap)
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 110/215 mac80211: consider per-CPU statistics if present
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit d656a4c6ead6c3f252b2f2532bc9735598f7e317 ]
If we have been keeping per-CPU statistics, consider them regardless of USES_RSS, because we may not actually fill those, for example in non-fast-RX cases when the connection is not compatible with fast-RX. If we didn't fill them, the additional data will be zero and not affect anything, and if we did fill them then it's more correct to consider them.
This fixes an issue in mesh mode where some statistics are not updated due to USES_RSS being set, but fast-RX isn't used.
--- net/mac80211/sta_info.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
net/mac80211/sta_info.c +3 -8
@@ -2088,10 +2088,9 @@ static struct ieee80211_sta_rx_stats * sta_get_last_rx_stats(struct sta_info *sta) {struct ieee80211_sta_rx_stats *stats = &sta->rx_stats; -struct ieee80211_local *local = sta->local;int cpu; -if (!ieee80211_hw_check (&local->hw,USES_RSS )) +if (!sta->pcpu_rx_stats)return stats;for_each_possible_cpu (cpu) {
@@ -2191,9 +2190,7 @@ static void sta_set_tidstats(struct sta_info *sta,int cpu;if (!(tidstats->filled &BIT (NL80211_TID_STATS_RX_MSDU ))) { -if (!ieee80211_hw_check (&local->hw,USES_RSS )) - tidstats->rx_msdu += -sta_get_tidstats_msdu (&sta->rx_stats, tid); + tidstats->rx_msdu +=sta_get_tidstats_msdu (&sta->rx_stats, tid);if (sta->pcpu_rx_stats) {for_each_possible_cpu (cpu) {
@@ -2272,7 +2269,6 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo, sinfo->rx_beacon = sdata->u.mgd.count_beacon_signal;drv_sta_statistics (local, sdata, &sta->sta, sinfo); - sinfo->filled |=BIT_ULL (NL80211_STA_INFO_INACTIVE_TIME ) |BIT_ULL (NL80211_STA_INFO_STA_FLAGS ) | BIT_ULL(NL80211_STA_INFO_BSS_PARAM) |
@@ -2307,8 +2303,7 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo,if (!(sinfo->filled & (BIT_ULL (NL80211_STA_INFO_RX_BYTES64 ) |BIT_ULL (NL80211_STA_INFO_RX_BYTES )))) { -if (!ieee80211_hw_check (&local->hw,USES_RSS )) - sinfo->rx_bytes +=sta_get_stats_bytes (&sta->rx_stats); + sinfo->rx_bytes +=sta_get_stats_bytes (&sta->rx_stats);if (sta->pcpu_rx_stats) {for_each_possible_cpu (cpu) {
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 111/215 mac80211_hwsim: add concurrent channels scanning support over virtio
In reply to Greg Kroah-HartmanFrom: Weilun Du <[email protected]>
[ Upstream commit 626c30f9e77354301ff9162c3bdddaf92d9b5cf3 ]
This fixed the crash when setting channels to 2 or more when communicating over virtio.
--- drivers/net/wireless/mac80211_hwsim.c | 48 +++++++++++++++++++++------ 1 file changed, 38 insertions(+), 10 deletions(-)
drivers/net/wireless/mac80211_hwsim.c +38 -10
@@ -557,6 +557,7 @@ struct mac80211_hwsim_data {u32 ciphers[ARRAY_SIZE (hwsim_ciphers)];struct mac_address addresses[2 ]; +struct ieee80211_chanctx_conf *chanctx;int channels, idx;bool use_chanctx;bool destroy_on_close;
@@ -1187,7 +1188,8 @@ static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)static void mac80211_hwsim_tx_frame_nl (struct ieee80211_hw *hw,struct sk_buff *my_skb, -int dst_portid) +int dst_portid, +struct ieee80211_channel *channel) {struct sk_buff *skb;struct mac80211_hwsim_data *data = hw->priv;
@@ -1242,7 +1244,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,if (nla_put_u32 (skb,HWSIM_ATTR_FLAGS , hwsim_flags)) goto nla_put_failure; -if (nla_put_u32 (skb,HWSIM_ATTR_FREQ , data->channel->center_freq)) +if (nla_put_u32 (skb,HWSIM_ATTR_FREQ , channel->center_freq)) goto nla_put_failure;/* We get the tx control (rate and retries) info*/
@@ -1589,7 +1591,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw, _portid =READ_ONCE (data->wmediumd);if (_portid || hwsim_virtio_enabled) -return mac80211_hwsim_tx_frame_nl (hw, skb, _portid); +return mac80211_hwsim_tx_frame_nl (hw, skb, _portid, channel);/* NO wmediumd detected, perfect medium simulation */ data->tx_pkts++;
@@ -1705,7 +1707,7 @@ static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,mac80211_hwsim_monitor_rx (hw, skb, chan);if (_pid || hwsim_virtio_enabled) -return mac80211_hwsim_tx_frame_nl (hw, skb, _pid); +return mac80211_hwsim_tx_frame_nl (hw, skb, _pid, chan);mac80211_hwsim_tx_frame_no_nl (hw, skb, chan);dev_kfree_skb (skb);
@@ -2444,6 +2446,11 @@ static int mac80211_hwsim_croc(struct ieee80211_hw *hw,static int mac80211_hwsim_add_chanctx (struct ieee80211_hw *hw,struct ieee80211_chanctx_conf *ctx) { +struct mac80211_hwsim_data *hwsim = hw->priv; + +mutex_lock (&hwsim->mutex); + hwsim->chanctx = ctx; +mutex_unlock (&hwsim->mutex);hwsim_set_chanctx_magic (ctx); wiphy_dbg(hw->wiphy, "add channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -2455,6 +2462,11 @@ static int mac80211_hwsim_add_chanctx(struct ieee80211_hw *hw,static void mac80211_hwsim_remove_chanctx (struct ieee80211_hw *hw,struct ieee80211_chanctx_conf *ctx) { +struct mac80211_hwsim_data *hwsim = hw->priv; + +mutex_lock (&hwsim->mutex); + hwsim->chanctx =NULL ; +mutex_unlock (&hwsim->mutex); wiphy_dbg(hw->wiphy, "remove channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n", ctx->def.chan->center_freq, ctx->def.width,
@@ -2467,6 +2479,11 @@ static void mac80211_hwsim_change_chanctx(struct ieee80211_hw *hw, struct ieee80211_chanctx_conf *ctx, u32 changed) { +struct mac80211_hwsim_data *hwsim = hw->priv; + +mutex_lock (&hwsim->mutex); + hwsim->chanctx = ctx; +mutex_unlock (&hwsim->mutex);hwsim_check_chanctx_magic (ctx); wiphy_dbg(hw->wiphy, "change channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -3059,6 +3076,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info, hw->wiphy->max_remain_on_channel_duration =1000 ; data->if_combination.radar_detect_widths =0 ; data->if_combination.num_different_channels = data->channels; + data->chanctx =NULL ; }else { data->if_combination.num_different_channels =1 ; data->if_combination.radar_detect_widths =
@@ -3566,6 +3584,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,int frame_data_len;void *frame_data;struct sk_buff *skb =NULL ; +struct ieee80211_channel *channel =NULL ; if (!info->attrs[HWSIM_ATTR_ADDR_RECEIVER] || !info->attrs[HWSIM_ATTR_FRAME] ||
@@ -3592,6 +3611,17 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,if (!data2) goto out; +if (data2->use_chanctx) { +if (data2->tmp_chan) + channel = data2->tmp_chan; +else if (data2->chanctx) + channel = data2->chanctx->def.chan; + }else { + channel = data2->channel; + } +if (!channel) + goto out; +if (!hwsim_virtio_enabled) {if (hwsim_net_get_netgroup (genl_info_net (info)) != data2->netgroup)
@@ -3603,7 +3633,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,/* check if radio is configured properly */ -if (data2->idle || !data2->started) +if ((data2->idle && !data2->tmp_chan) || !data2->started) goto out;/* A frame is received from user space */
@@ -3616,18 +3646,16 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,mutex_lock (&data2->mutex); rx_status.freq =nla_get_u32 (info->attrs[HWSIM_ATTR_FREQ ]); -if (rx_status.freq != data2->channel->center_freq && - (!data2->tmp_chan || - rx_status.freq != data2->tmp_chan->center_freq)) { +if (rx_status.freq != channel->center_freq) {mutex_unlock (&data2->mutex); goto out; }mutex_unlock (&data2->mutex); }else { - rx_status.freq = data2->channel->center_freq; + rx_status.freq = channel->center_freq; } - rx_status.band = data2->channel->band; + rx_status.band = channel->band; rx_status.rate_idx =nla_get_u32 (info->attrs[HWSIM_ATTR_RX_RATE ]); rx_status.signal =nla_get_u32 (info->attrs[HWSIM_ATTR_SIGNAL ]);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 112/215 IB/isert: Align target max I/O size to initiator size
In reply to Greg Kroah-HartmanFrom: Max Gurtovoy <[email protected]>
[ Upstream commit 109d19a5eb3ddbdb87c43bfd4bcf644f4569da64 ]
Since the Linux iser initiator default max I/O size set to 512KB and since there is no handshake procedure for this size in iser protocol, set the default max IO size of the target to 512KB as well.
For changing the default values, there is a module parameter for both drivers.
--- drivers/infiniband/ulp/isert/ib_isert.c | 4 ++-- drivers/infiniband/ulp/isert/ib_isert.h | 3 --- 2 files changed, 2 insertions(+), 5 deletions(-)
drivers/infiniband/ulp/isert/ib_isert.c +2 -2
@@ -35,10 +35,10 @@ static const struct kernel_param_ops sg_tablesize_ops = { .get = param_get_int, }; -static int isert_sg_tablesize =ISCSI_ISER_DEF_SG_TABLESIZE ; +static int isert_sg_tablesize =ISCSI_ISER_MIN_SG_TABLESIZE ;module_param_cb (sg_tablesize, &sg_tablesize_ops, &isert_sg_tablesize,0644 );MODULE_PARM_DESC (sg_tablesize, -"Number of gather/scatter entries in a single scsi command, should >= 128 (default: 256, max: 4096)" ); +"Number of gather/scatter entries in a single scsi command, should >= 128 (default: 128, max: 4096)" );static DEFINE_MUTEX (device_list_mutex);static LIST_HEAD (device_list);
drivers/infiniband/ulp/isert/ib_isert.h +0 -3
@@ -65,9 +65,6 @@*/ #define ISER_RX_SIZE (ISCSI_DEF_MAX_RECV_SEG_LEN + 1024) -/* Default I/O size is 1MB */ -#define ISCSI_ISER_DEF_SG_TABLESIZE 256 -/* Minimum I/O size is 512KB */ #define ISCSI_ISER_MIN_SG_TABLESIZE 128
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 113/215 media, bpf: Do not copy more entries than user space requested
In reply to Greg Kroah-HartmanFrom: Sean Young <[email protected]>
[ Upstream commit 647d446d66e493d23ca1047fa8492b0269674530 ]
The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to see how many entries user space provided and return ENOSPC if there are more programs than that. Before this patch, this is not checked and ENOSPC is never returned.
Note that one lirc device is limited to 64 bpf programs, and user space I'm aware of -- ir-keytable -- always gives enough space for 64 entries already. However, we should not copy program ids than are requested.
--- drivers/media/rc/bpf-lirc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/rc/bpf-lirc.c +2 -1
@@ -326,7 +326,8 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr) }if (attr->query.prog_cnt !=0 && prog_ids && cnt) - ret =bpf_prog_array_copy_to_user (progs, prog_ids, cnt); + ret =bpf_prog_array_copy_to_user (progs, prog_ids, + attr->query.prog_cnt); unlock:mutex_unlock (&ir_raw_handler_lock);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 114/215 net: ip: avoid OOM kills with large UDP sends over loopback
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
[ Upstream commit 6d123b81ac615072a8525c13c6c41b695270a15d ]
Dave observed number of machines hitting OOM on the UDP send path. The workload seems to be sending large UDP packets over loopback. Since loopback has MTU of 64k kernel will try to allocate an skb with up to 64k of head space. This has a good chance of failing under memory pressure. What's worse if the message length is <32k the allocation may trigger an OOM killer.
This is entirely avoidable, we can use an skb with page frags.
af_unix solves a similar problem by limiting the head length to SKB_MAX_ALLOC. This seems like a good and simple approach. It means that UDP messages > 16kB will now use fragments if underlying device supports SG, if extra allocator pressure causes regressions in real workloads we can switch to trying the large allocation first and falling back.
v4: pre-calculate all the additions to alloclen so
we can be sure it won't go over order-2
--- net/ipv4/ip_output.c | 32 ++++++++++++++++++-------------- net/ipv6/ip6_output.c | 32 +++++++++++++++++--------------- 2 files changed, 35 insertions(+), 29 deletions(-)
net/ipv4/ip_output.c +18 -14
@@ -1053,7 +1053,7 @@ static int __ip_append_data(struct sock *sk,unsigned int datalen;unsigned int fraglen;unsigned int fraggap; -unsigned int alloclen; +unsigned int alloclen, alloc_extra;unsigned int pagedlen;struct sk_buff *skb_prev; alloc_new_skb:
@@ -1073,35 +1073,39 @@ alloc_new_skb: fraglen = datalen + fragheaderlen; pagedlen =0 ; + alloc_extra = hh_len +15 ; + alloc_extra += exthdrlen; + +/* The last fragment gets additional space at tail. +* Note, with MSG_MORE we overallocate on fragments, +* because we have no idea what fragment will be +* the last. +*/ +if (datalen == length + fraggap) + alloc_extra += rt->dst.trailer_len; +if ((flags &MSG_MORE ) && !(rt->dst.dev->features&NETIF_F_SG )) alloclen = mtu; -else if (!paged) +else if (!paged && + (fraglen + alloc_extra <SKB_MAX_ALLOC || + !(rt->dst.dev->features &NETIF_F_SG ))) alloclen = fraglen;else { alloclen =min_t (int, fraglen,MAX_HEADER ); pagedlen = fraglen - alloclen; } - alloclen += exthdrlen; - -/* The last fragment gets additional space at tail. -* Note, with MSG_MORE we overallocate on fragments, -* because we have no idea what fragment will be -* the last. -*/ -if (datalen == length + fraggap) - alloclen += rt->dst.trailer_len; + alloclen += alloc_extra;if (transhdrlen) { - skb =sock_alloc_send_skb (sk, - alloclen + hh_len +15 , + skb =sock_alloc_send_skb (sk, alloclen, (flags &MSG_DONTWAIT ), &err); }else { skb =NULL ;if (refcount_read (&sk->sk_wmem_alloc) + wmem_alloc_delta <=2 * sk->sk_sndbuf) - skb =alloc_skb (alloclen + hh_len +15 , + skb =alloc_skb (alloclen, sk->sk_allocation);if (unlikely (!skb)) err = -ENOBUFS ;
net/ipv6/ip6_output.c +17 -15
@@ -1554,7 +1554,7 @@ emsgsize:unsigned int datalen;unsigned int fraglen;unsigned int fraggap; -unsigned int alloclen; +unsigned int alloclen, alloc_extra;unsigned int pagedlen; alloc_new_skb:/* There's no room in the current skb */
@@ -1581,17 +1581,28 @@ alloc_new_skb: fraglen = datalen + fragheaderlen; pagedlen =0 ; + alloc_extra = hh_len; + alloc_extra += dst_exthdrlen; + alloc_extra += rt->dst.trailer_len; + +/* We just reserve space for fragment header. +* Note: this may be overallocation if the message +* (without MSG_MORE) fits into the MTU. +*/ + alloc_extra +=sizeof (struct frag_hdr ); +if ((flags &MSG_MORE ) && !(rt->dst.dev->features&NETIF_F_SG )) alloclen = mtu; -else if (!paged) +else if (!paged && + (fraglen + alloc_extra <SKB_MAX_ALLOC || + !(rt->dst.dev->features &NETIF_F_SG ))) alloclen = fraglen;else { alloclen =min_t (int, fraglen,MAX_HEADER ); pagedlen = fraglen - alloclen; } - - alloclen += dst_exthdrlen; + alloclen += alloc_extra;if (datalen != length + fraggap) {/*
@@ -1601,30 +1612,21 @@ alloc_new_skb: datalen += rt->dst.trailer_len; } - alloclen += rt->dst.trailer_len; fraglen = datalen + fragheaderlen; -/* -* We just reserve space for fragment header. -* Note: this may be overallocation if the message -* (without MSG_MORE) fits into the MTU. -*/ - alloclen +=sizeof (struct frag_hdr ); - copy = datalen - transhdrlen - fraggap - pagedlen;if (copy <0 ) { err = -EINVAL ; goto error; }if (transhdrlen) { - skb =sock_alloc_send_skb (sk, - alloclen + hh_len, + skb =sock_alloc_send_skb (sk, alloclen, (flags &MSG_DONTWAIT ), &err); }else { skb =NULL ;if (refcount_read (&sk->sk_wmem_alloc) + wmem_alloc_delta <=2 * sk->sk_sndbuf) - skb =alloc_skb (alloclen + hh_len, + skb =alloc_skb (alloclen, sk->sk_allocation);if (unlikely (!skb)) err = -ENOBUFS ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 115/215 RDMA/cma: Fix rdma_resolve_route() memory leak
In reply to Greg Kroah-HartmanFrom: Gerd Rausch <[email protected]>
[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]
Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id".
This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.
--- drivers/infiniband/core/cma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/cma.c +2 -1
@@ -2793,7 +2793,8 @@ static int cma_resolve_ib_route(struct rdma_id_private *id_priv,cma_init_resolve_route_work (work, id_priv); - route->path_rec =kmalloc (sizeof *route->path_rec,GFP_KERNEL ); +if (!route->path_rec) + route->path_rec =kmalloc (sizeof *route->path_rec,GFP_KERNEL );if (!route->path_rec) { ret = -ENOMEM ; goto err1;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 116/215 Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.
In reply to Greg Kroah-HartmanFrom: mark-yw.chen <[email protected]>
[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ]
This patch reduce in-token during download patch procedure. Don't submit urb for polling event before sending hci command.
--- drivers/bluetooth/btusb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/bluetooth/btusb.c +5 -5
@@ -2963,11 +2963,6 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,struct btmtk_wmt_hdr *hdr;int err; -/* Submit control IN URB on demand to process the WMT event */ - err =btusb_mtk_submit_wmt_recv_urb (hdev); -if (err <0 ) -return err; -/* Send the WMT command and wait until the WMT event returns */ hlen =sizeof (*hdr) + wmt_params->dlen;if (hlen >255 )
@@ -2989,6 +2984,11 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,return err; } +/* Submit control IN URB on demand to process the WMT event */ + err =btusb_mtk_submit_wmt_recv_urb (hdev); +if (err <0 ) +return err; +/* The vendor specific WMT commands are all answered by a vendor * specific event and will have the Command Status or Command * Complete as with usual HCI command flow control.
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 117/215 Bluetooth: Fix the HCI to MGMT status conversion table
In reply to Greg Kroah-HartmanFrom: Yu Liu <[email protected]>
[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]
0x2B, 0x31 and 0x33 are reserved for future use but were not present in the HCI to MGMT conversion table, this caused the conversion to be incorrect for the HCI status code greater than 0x2A.
--- net/bluetooth/mgmt.c | 3 +++ 1 file changed, 3 insertions(+)
net/bluetooth/mgmt.c +3 -0
@@ -247,12 +247,15 @@ static const u8 mgmt_status_table[] = {MGMT_STATUS_TIMEOUT ,/* Instant Passed */ MGMT_STATUS_NOT_SUPPORTED ,/* Pairing Not Supported */ MGMT_STATUS_FAILED ,/* Transaction Collision */ +MGMT_STATUS_FAILED ,/* Reserved for future use */ MGMT_STATUS_INVALID_PARAMS ,/* Unacceptable Parameter */ MGMT_STATUS_REJECTED ,/* QoS Rejected */ MGMT_STATUS_NOT_SUPPORTED ,/* Classification Not Supported */ MGMT_STATUS_REJECTED ,/* Insufficient Security */ MGMT_STATUS_INVALID_PARAMS ,/* Parameter Out Of Range */ +MGMT_STATUS_FAILED ,/* Reserved for future use */ MGMT_STATUS_BUSY ,/* Role Switch Pending */ +MGMT_STATUS_FAILED ,/* Reserved for future use */ MGMT_STATUS_FAILED ,/* Slot Violation */ MGMT_STATUS_FAILED ,/* Role Switch Failed */ MGMT_STATUS_INVALID_PARAMS, /* EIR Too Large */
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 118/215 Bluetooth: Fix alt settings for incoming SCO with transparent coding format
In reply to Greg Kroah-HartmanFrom: Kiran K <[email protected]>
[ Upstream commit 06d213d8a89a6f55b708422c3dda2b22add10748 ]
For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Synchronous Connect Comp.. (
0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)........
Quoted 1 line
SCO Data RX: Handle 257 flags
0x00dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4 #310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)Quoted 1 line
HCI Event: Synchronous Connect Complete (
0x2c) plen 17 #311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311--- net/bluetooth/hci_event.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
net/bluetooth/hci_event.c +3 -3
@@ -4360,12 +4360,12 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,bt_dev_dbg (hdev,"SCO connected with air mode: %02x" , ev->air_mode); -switch (conn->setting &SCO_AIRMODE_MASK ) { -case SCO_AIRMODE_CVSD : +switch (ev->air_mode) { +case 0x02 :if (hdev->notify) hdev->notify (hdev,HCI_NOTIFY_ENABLE_SCO_CVSD );break ; -case SCO_AIRMODE_TRANSP : +case 0x03 :if (hdev->notify) hdev->notify (hdev,HCI_NOTIFY_ENABLE_SCO_TRANSP );break ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 119/215 Bluetooth: Shutdown controller after workqueues are flushed or cancelled
In reply to Greg Kroah-HartmanFrom: Kai-Heng Feng <[email protected]>
[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working:
[ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff
So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue.
--- net/bluetooth/hci_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
net/bluetooth/hci_core.c +8 -8
@@ -1713,14 +1713,6 @@ int hci_dev_do_close(struct hci_dev *hdev)BT_DBG ("%s %p" , hdev->name, hdev); -if (!hci_dev_test_flag (hdev,HCI_UNREGISTER ) && - !hci_dev_test_flag (hdev,HCI_USER_CHANNEL ) && -test_bit (HCI_UP , &hdev->flags)) { -/* Execute vendor specific shutdown routine */ -if (hdev->shutdown) - hdev->shutdown (hdev); - } -cancel_delayed_work (&hdev->power_off);hci_request_cancel_all (hdev);
@@ -1796,6 +1788,14 @@ int hci_dev_do_close(struct hci_dev *hdev)clear_bit (HCI_INIT , &hdev->flags); } +if (!hci_dev_test_flag (hdev,HCI_UNREGISTER ) && + !hci_dev_test_flag (hdev,HCI_USER_CHANNEL ) && +test_bit (HCI_UP , &hdev->flags)) { +/* Execute vendor specific shutdown routine */ +if (hdev->shutdown) + hdev->shutdown (hdev); + } +/* flush cmd work */ flush_work (&hdev->cmd_work);
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 120/215 Bluetooth: btusb: Add a new QCA_ROME device (0cf3:e500)
In reply to Greg Kroah-HartmanFrom: Daniel Lenski <[email protected]>
[ Upstream commit 0324d19cb99804d99e42c990b8b1e191575a091b ]
This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a QCA_ROME device. It appears to be functionally identical to another device ID, also from a QCA9377 board, which was previously marked as QCA_ROME in 0a03f98b98c201191e3ba15a0e33f46d8660e1fd
("Bluetooth: Add a new 04ca:3015 QCA_ROME device").
Without this patch, the WiFi side of the QCA9377 board is slow or unusable when the Bluetooth side is in use.
See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing this issue for this device ID.
/sys/kernel/debug/usb/devices:
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e500 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -269,6 +269,8 @@ static const struct usb_device_id blacklist_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 121/215 Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure fails
In reply to Greg Kroah-HartmanFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 1fa20d7d4aad02206e84b74915819fbe9f81dab3 ]
The use of l2cap_chan_del is not safe under a loop using list_for_each_entry.
--- net/bluetooth/l2cap_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/bluetooth/l2cap_core.c +2 -2
@@ -6237,7 +6237,7 @@ static inline int l2cap_ecred_reconf_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data) { - struct l2cap_chan *chan; + struct l2cap_chan *chan, *tmp;struct l2cap_ecred_conn_rsp *rsp = (void *) data;u16 result;
@@ -6251,7 +6251,7 @@ static inline int l2cap_ecred_reconf_rsp(struct l2cap_conn *conn,if (!result)return 0 ; -list_for_each_entry (chan, &conn->chan_l, list) { +list_for_each_entry_safe (chan, tmp, &conn->chan_l, list) {if (chan->ident != cmd->ident)continue ;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 122/215 Bluetooth: L2CAP: Fix invalid access on ECRED Connection response
In reply to Greg Kroah-HartmanFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit de895b43932cb47e69480540be7eca289af24f23 ]
The use of l2cap_chan_del is not safe under a loop using list_for_each_entry.
--- net/bluetooth/l2cap_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/bluetooth/l2cap_core.c +2 -2
@@ -6055,7 +6055,7 @@ static inline int l2cap_ecred_conn_rsp(struct l2cap_conn *conn,struct l2cap_ecred_conn_rsp *rsp = (void *) data;struct hci_conn *hcon = conn->hcon;u16 mtu, mps, credits, result; -struct l2cap_chan *chan; +struct l2cap_chan *chan, *tmp;int err =0 , sec_level;int i =0 ;
@@ -6074,7 +6074,7 @@ static inline int l2cap_ecred_conn_rsp(struct l2cap_conn *conn, cmd_len -=sizeof (*rsp); -list_for_each_entry (chan, &conn->chan_l, list) { +list_for_each_entry_safe (chan, tmp, &conn->chan_l, list) {u16 dcid; if (chan->ident != cmd->ident ||
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 123/215 Bluetooth: btusb: Add support USB ALT 3 for WBS
In reply to Greg Kroah-HartmanFrom: Hilda Wu <[email protected]>
[ Upstream commit e848dbd364aca44c9d23c04bef964fab79e2b34f ]
Because mSBC frames do not need to be aligned to the SCO packet boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC data satisfy 60 Bytes avoid payload unaligned situation and fixed some headset no voise issue.
USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
--- drivers/bluetooth/btusb.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/bluetooth/btusb.c +7 -0
@@ -1721,6 +1721,13 @@ static void btusb_work(struct work_struct *work)* which work with WBS at all. */ new_alts =btusb_find_altsetting (data,6 ) ?6 :1 ; +/* Because mSBC frames do not need to be aligned to the +* SCO packet boundary. If support the Alt 3, use the +* Alt 3 for HCI payload >= 60 Bytes let air packet +* data satisfy 60 bytes. +*/ +if (new_alts ==1 &&btusb_find_altsetting (data,3 )) + new_alts =3 ; }if (btusb_switch_alt_setting (hdev, new_alts) <0 )
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 124/215 Bluetooth: mgmt: Fix the command returns garbage parameter value
In reply to Greg Kroah-HartmanFrom: Tedd Ho-Jeong An <[email protected]>
[ Upstream commit 02ce2c2c24024aade65a8d91d6a596651eaf2d0a ]
When the Get Device Flags command fails, it returns the error status with the parameters filled with the garbage values. Although the parameters are not used, it is better to fill with zero than the random values.
--- net/bluetooth/mgmt.c | 2 ++ 1 file changed, 2 insertions(+)
net/bluetooth/mgmt.c +2 -0
@@ -4038,6 +4038,8 @@ static int get_device_flags(struct sock *sk, struct hci_dev *hdev, void *data,hci_dev_lock (hdev); +memset (&rp,0 ,sizeof (rp)); +if (cp->addr.type ==BDADDR_BREDR ) { br_params = hci_bdaddr_list_lookup_with_flags(&hdev->whitelist, &cp->addr.bdaddr,
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 125/215 Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
In reply to Greg Kroah-HartmanFrom: Tim Jiang <[email protected]>
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]
This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround.
--- drivers/bluetooth/btusb.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/bluetooth/btusb.c +5 -0
@@ -3558,6 +3558,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev, sent += size; count -= size; +/* ep2 need time to switch from function acl to function dfu, +* so we add 20ms delay here. +*/ +msleep (20 ); +while (count) { size =min_t (size_t, count,QCA_DFU_PACKET_LEN );
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 126/215 sched/fair: Ensure _sum and _avg values stay consistent
In reply to Greg Kroah-HartmanFrom: Odin Ugedal <[email protected]>
[ Upstream commit 1c35b07e6d3986474e5635be566e7bc79d97c64d ]
The _sum and _avg values are in general sync together with the PELT divider. They are however not always completely in perfect sync, resulting in situations where _sum gets to zero while _avg stays positive. Such situations are undesirable.
This comes from the fact that PELT will increase period_contrib, also increasing the PELT divider, without updating _sum and _avg values to stay in perfect sync where (_sum == _avg * divider). However, such PELT change will never lower _sum, making it impossible to end up in a situation where _sum is zero and _avg is not.
Therefore, we need to ensure that when subtracting load outside PELT, that when _sum is zero, _avg is also set to zero. This occurs when (_sum < _avg * divider), and the subtracted (_avg * divider) is bigger or equal to the current _sum, while the subtracted _avg is smaller than the current _avg.
--- kernel/sched/fair.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/sched/fair.c +3 -3
@@ -3672,15 +3672,15 @@ update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq) r = removed_load;sub_positive (&sa->load_avg, r); -sub_positive (&sa->load_sum, r * divider); + sa->load_sum = sa->load_avg * divider; r = removed_util;sub_positive (&sa->util_avg, r); -sub_positive (&sa->util_sum, r * divider); + sa->util_sum = sa->util_avg * divider; r = removed_runnable;sub_positive (&sa->runnable_avg, r); -sub_positive (&sa->runnable_sum, r * divider); + sa->runnable_sum = sa->runnable_avg * divider;/* * removed_runnable is the unweighted version of removed_load so we
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 127/215 bpf: Fix false positive kmemleak report in bpf_ringbuf_area_alloc()
In reply to Greg Kroah-HartmanFrom: Rustam Kovhaev <[email protected]>
[ Upstream commit ccff81e1d028bbbf8573d3364a87542386c707bf ]
kmemleak scans struct page, but it does not scan the page content. If we allocate some memory with kmalloc(), then allocate page with alloc_page(), and if we put kmalloc pointer somewhere inside that page, kmemleak will report kmalloc pointer as a false positive.
We can instruct kmemleak to scan the memory area by calling kmemleak_alloc() and kmemleak_free(), but part of struct bpf_ringbuf is mmaped to user space, and if struct bpf_ringbuf changes we would have to revisit and review size argument in kmemleak_alloc(), because we do not want kmemleak to scan the user space memory. Let's simplify things and use kmemleak_not_leak() here.
For posterity, also adding additional prior analysis from Andrii:
I think either kmemleak or syzbot are misreporting this. I've added a bunch of printks around all allocations performed by BPF ringbuf. [...] On repro side I get these two warnings:
[vmuser@archvm bpf]$ sudo ./repro
BUG: memory leak
unreferenced object 0xffff88810d538c00 (size 64):
comm "repro", pid 2140, jiffies 4294692933 (age 14.540s)
hex dump (first 32 bytes):
00 af 19 04 00 ea ff ff c0 ae 19 04 00 ea ff ff ................
80 ae 19 04 00 ea ff ff c0 29 2e 04 00 ea ff ff .........)......
backtrace:
[<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
[<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
[<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
[<00000000f601d565>] do_syscall_64+0x2d/0x40
[<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff88810d538c80 (size 64):
comm "repro", pid 2143, jiffies 4294699025 (age 8.448s)
hex dump (first 32 bytes):
80 aa 19 04 00 ea ff ff 00 ab 19 04 00 ea ff ff ................
c0 ab 19 04 00 ea ff ff 80 44 28 04 00 ea ff ff .........D(.....
backtrace:
[<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
[<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
[<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
[<00000000f601d565>] do_syscall_64+0x2d/0x40
[<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae Note that both reported leaks (ffff88810d538c80 and ffff88810d538c00) correspond to pages array bpf_ringbuf is allocating and tracking properly internally. Note also that syzbot repro doesn't close FD of created BPF ringbufs, and even when ./repro itself exits with error, there are still two forked processes hanging around in my system. So clearly ringbuf maps are alive at that point. So reporting any memory leak looks weird at that point, because that memory is being used by active referenced BPF ringbuf.
It's also a question why repro doesn't clean up its forks. But if I do a pkill repro, I do see that all the allocated memory is /properly/ cleaned up [and the] "leaks" are deallocated properly.
BTW, if I add close() right after bpf() syscall in syzbot repro, I see that everything is immediately deallocated, like designed. And no memory leak is reported. So I don't think the problem is anywhere in bpf_ringbuf code, rather in the leak detection and/or repro itself.
--- kernel/bpf/ringbuf.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/bpf/ringbuf.c +2 -0
@@ -8,6 +8,7 @@#include <linux/vmalloc.h> #include <linux/wait.h> #include <linux/poll.h> +#include <linux/kmemleak.h> #include <uapi/linux/btf.h> #define RINGBUF_CREATE_FLAG_MASK (BPF_F_NUMA_NODE)
@@ -109,6 +110,7 @@ static struct bpf_ringbuf *bpf_ringbuf_area_alloc(size_t data_sz, int numa_node) rb =vmap (pages, nr_meta_pages +2 * nr_data_pages,VM_ALLOC |VM_USERMAP ,PAGE_KERNEL );if (rb) { +kmemleak_not_leak (pages); rb->pages = pages; rb->nr_pages = nr_pages;return rb;
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 128/215 flow_offload: action should not be NULL when it is referenced
In reply to Greg Kroah-HartmanFrom: gushengxian <[email protected]>
[ Upstream commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a ]
"action" should not be NULL when it is referenced.
--- include/net/flow_offload.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
include/net/flow_offload.h +7 -5
@@ -312,12 +312,14 @@ flow_action_mixed_hw_stats_check(const struct flow_action *action,if (flow_offload_has_one_action (action))return true; -flow_action_for_each (i, action_entry, action) { -if (i && action_entry->hw_stats != last_hw_stats) { -NL_SET_ERR_MSG_MOD (extack,"Mixing HW stats types for actions is not supported" ); -return false; +if (action) { +flow_action_for_each (i, action_entry, action) { +if (i && action_entry->hw_stats != last_hw_stats) { +NL_SET_ERR_MSG_MOD (extack,"Mixing HW stats types for actions is not supported" ); +return false; + } + last_hw_stats = action_entry->hw_stats; } - last_hw_stats = action_entry->hw_stats; }return true; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 129/215 sctp: validate from_addr_param return
In reply to Greg Kroah-HartmanFrom: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ]
Ilja reported that, simply putting it, nothing was validating that from_addr_param functions were operating on initialized memory. That is, the parameter itself was being validated by sctp_walk_params, but it doesn't check for types and their specific sizes and it could be a 0-length one, causing from_addr_param to potentially work over the next parameter or even uninitialized memory.
The fix here is to, in all calls to from_addr_param, check if enough space is there for the wanted IP address type.
--- include/net/sctp/structs.h | 2 +- net/sctp/bind_addr.c | 19 +++++++++++-------- net/sctp/input.c | 6 ++++-- net/sctp/ipv6.c | 7 ++++++- net/sctp/protocol.c | 7 ++++++- net/sctp/sm_make_chunk.c | 29 ++++++++++++++++------------- 6 files changed, 44 insertions(+), 26 deletions(-)
include/net/sctp/structs.h +1 -1
@@ -458,7 +458,7 @@ struct sctp_af { int saddr);void (*from_sk) (union sctp_addr *,struct sock *sk); -void (*from_addr_param) (union sctp_addr *, +bool (*from_addr_param) (union sctp_addr *,union sctp_addr_param *,__be16 port,int iif); int (*to_addr_param) (const union sctp_addr *,
net/sctp/bind_addr.c +11 -8
@@ -270,22 +270,19 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list, rawaddr = (union sctp_addr_param *)raw_addr_list; af =sctp_get_af_specific (param_type2af (param->type)); -if (unlikely (!af)) { +if (unlikely (!af) || + !af->from_addr_param (&addr, rawaddr,htons (port),0 )) { retval = -EINVAL ; -sctp_bind_addr_clean (bp); -break ; + goto out_err; } - af->from_addr_param (&addr, rawaddr,htons (port),0 );if (sctp_bind_addr_state (bp, &addr) !=-1 ) goto next; retval =sctp_add_bind_addr (bp, &addr,sizeof (addr),SCTP_ADDR_SRC , gfp); -if (retval) { +if (retval)/* Can't finish building the list, clean up. */ -sctp_bind_addr_clean (bp); -break ; - } + goto out_err; next: len =ntohs (param->length);
@@ -294,6 +291,12 @@ next: }return retval; + +out_err: +if (retval) +sctp_bind_addr_clean (bp); + +return retval; }/********************************************************************
net/sctp/input.c +4 -2
@@ -1131,7 +1131,8 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,if (!af)continue ; - af->from_addr_param (paddr, params.addr, sh->source,0 ); +if (!af->from_addr_param (paddr, params.addr, sh->source,0 )) +continue ; asoc =__sctp_lookup_association (net, laddr, paddr, transportp);if (asoc)
@@ -1174,7 +1175,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(if (unlikely (!af))return NULL ; - af->from_addr_param (&paddr, param, peer_port,0 ); +if (af->from_addr_param (&paddr, param, peer_port,0 )) +return NULL ;return __sctp_lookup_association (net, laddr, &paddr, transportp); }
net/sctp/ipv6.c +6 -1
@@ -530,15 +530,20 @@ static void sctp_v6_to_sk_daddr(union sctp_addr *addr, struct sock *sk) }/* Initialize a sctp_addr from an address parameter. */ -static void sctp_v6_from_addr_param (union sctp_addr *addr, +static bool sctp_v6_from_addr_param (union sctp_addr *addr,union sctp_addr_param *param,__be16 port,int iif) { +if (ntohs (param->v6.param_hdr.length) <sizeof (struct sctp_ipv6addr_param )) +return false; + addr->v6.sin6_family =AF_INET6 ; addr->v6.sin6_port = port; addr->v6.sin6_flowinfo =0 ;/* BUG */ addr->v6.sin6_addr = param->v6.addr; addr->v6.sin6_scope_id = iif; + +return true; }/* Initialize an address parameter from a sctp_addr and return the length
net/sctp/protocol.c +6 -1
@@ -253,14 +253,19 @@ static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk) }/* Initialize a sctp_addr from an address parameter. */ -static void sctp_v4_from_addr_param (union sctp_addr *addr, +static bool sctp_v4_from_addr_param (union sctp_addr *addr,union sctp_addr_param *param,__be16 port,int iif) { +if (ntohs (param->v4.param_hdr.length) <sizeof (struct sctp_ipv4addr_param )) +return false; + addr->v4.sin_family =AF_INET ; addr->v4.sin_port = port; addr->v4.sin_addr.s_addr = param->v4.addr.s_addr;memset (addr->v4.sin_zero,0 ,sizeof (addr->v4.sin_zero)); + +return true; }/* Initialize an address parameter from a sctp_addr and return the length
net/sctp/sm_make_chunk.c +16 -13
@@ -2329,11 +2329,13 @@ int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,/* Process the initialization parameters. */ sctp_walk_params(param, peer_init, init_hdr.params) { -if (!src_match && (param.p->type ==SCTP_PARAM_IPV4_ADDRESS || - param.p->type ==SCTP_PARAM_IPV6_ADDRESS )) { +if (!src_match && + (param.p->type ==SCTP_PARAM_IPV4_ADDRESS || + param.p->type ==SCTP_PARAM_IPV6_ADDRESS )) { af =sctp_get_af_specific (param_type2af (param.p->type)); - af->from_addr_param (&addr, param.addr, - chunk->sctp_hdr->source,0 ); +if (!af->from_addr_param (&addr, param.addr, + chunk->sctp_hdr->source,0 )) +continue ;if (sctp_cmp_addr_exact (sctp_source (chunk), &addr)) src_match =1 ; }
@@ -2514,7 +2516,8 @@ static int sctp_process_param(struct sctp_association *asoc,break ; do_addr_param: af =sctp_get_af_specific (param_type2af (param.p->type)); - af->from_addr_param (&addr, param.addr,htons (asoc->peer.port),0 ); +if (!af->from_addr_param (&addr, param.addr,htons (asoc->peer.port),0 )) +break ; scope =sctp_scope (peer_addr);if (sctp_in_scope (net, &addr, scope))if (!sctp_assoc_add_peer (asoc, &addr, gfp,SCTP_UNCONFIRMED ))
@@ -2615,15 +2618,13 @@ do_addr_param: addr_param = param.v +sizeof (struct sctp_addip_param ); af =sctp_get_af_specific (param_type2af (addr_param->p.type)); -if (af ==NULL ) +if (!af)break ; - af->from_addr_param (&addr, addr_param, -htons (asoc->peer.port),0 ); +if (!af->from_addr_param (&addr, addr_param, +htons (asoc->peer.port),0 )) +break ; -/* if the address is invalid, we can't process it. -* XXX: see spec for what to do. -*/ if (!af->addr_valid (&addr,NULL ,NULL ))break ;
@@ -3037,7 +3038,8 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,if (unlikely (!af))return SCTP_ERROR_DNS_FAILED ; - af->from_addr_param (&addr, addr_param,htons (asoc->peer.port),0 ); +if (!af->from_addr_param (&addr, addr_param,htons (asoc->peer.port),0 )) +return SCTP_ERROR_DNS_FAILED ;/* ADDIP 4.2.1 This parameter MUST NOT contain a broadcast * or multicast address.
@@ -3314,7 +3316,8 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,/* We have checked the packet before, so we do not check again. */ af =sctp_get_af_specific (param_type2af (addr_param->p.type)); - af->from_addr_param (&addr, addr_param,htons (bp->port),0 ); +if (!af->from_addr_param (&addr, addr_param,htons (bp->port),0 )) +return ;switch (asconf_param->param_hdr.type) {case SCTP_PARAM_ADD_IP :
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 130/215 sctp: add size validation when walking chunks
In reply to Greg Kroah-HartmanFrom: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]
The first chunk in a packet is ensured to be present at the beginning of sctp_rcv(), as a packet needs to have at least 1 chunk. But the second one, may not be completely available and ch->length can be over uninitialized memory.
Fix here is by only trying to walk on the next chunk if there is enough to hold at least the header, and then proceed with the ch->length validation that is already there.
--- net/sctp/input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/sctp/input.c +1 -1
@@ -1247,7 +1247,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net, ch = (struct sctp_chunkhdr *)ch_end; chunk_num++; - }while (ch_end <skb_tail_pointer (skb)); + }while (ch_end +sizeof (*ch) <skb_tail_pointer (skb));return asoc; }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 131/215 MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
In reply to Greg Kroah-HartmanFrom: zhanglianjie <[email protected]>
[ Upstream commit 6817c944430d00f71ccaa9c99ff5b0096aeb7873 ]
The cause of the problem is as follows:
1. when cat /sys/devices/system/memory/memory0/valid_zones, test_pages_in_a_zone() will be called.
2. test_pages_in_a_zone() finds the zone according to stat_pfn = 0. The smallest pfn of the numa node in the mips architecture is 128, and the page corresponding to the previous 0~127 pfn is not initialized (page->flags is 0xFFFFFFFF)
3. The nid and zonenum obtained using page_zone(pfn_to_page(0)) are out of bounds in the corresponding array, &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)], access to the out-of-bounds zone member variables appear abnormal, resulting in Oops.
Therefore, it is necessary to keep the page between 0 and the minimum pfn to prevent Oops from appearing.
--- arch/mips/loongson64/numa.c | 3 +++ 1 file changed, 3 insertions(+)
arch/mips/loongson64/numa.c +3 -0
@@ -182,6 +182,9 @@ static void __init node_mem_init(unsigned int node)if (node_end_pfn (0 ) >= (0xffffffff >>PAGE_SHIFT ))memblock_reserve ((node_addrspace_offset |0xfe000000 ),32 <<20 ); + +/* Reserve pfn range 0~node[0]->node_start_pfn */ +memblock_reserve (0 ,PAGE_SIZE * start_pfn); } }
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 132/215 MIPS: set mips32r5 for virt extensions
In reply to Greg Kroah-HartmanFrom: Nick Desaulniers <[email protected]>
[ Upstream commit c994a3ec7ecc8bd2a837b2061e8a76eb8efc082b ]
Clang's integrated assembler only accepts these instructions when the cpu is set to mips32r5. With this change, we can assemble malta_defconfig with Clang via make LLVM_IAS=1.
--- arch/mips/include/asm/mipsregs.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/mips/include/asm/mipsregs.h +4 -4
@@ -2073,7 +2073,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c) ({ int __res; \ __asm__ __volatile__( \ ".set\tpush\n\t" \ - ".set\tmips32r2\n\t" \ + ".set\tmips32r5\n\t" \ _ASM_SET_VIRT \ "mfgc0\t%0, " #source ", %1\n\t" \ ".set\tpop" \
@@ -2086,7 +2086,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c) ({ unsigned long long __res; \ __asm__ __volatile__( \ ".set\tpush\n\t" \ - ".set\tmips64r2\n\t" \ + ".set\tmips64r5\n\t" \ _ASM_SET_VIRT \ "dmfgc0\t%0, " #source ", %1\n\t" \ ".set\tpop" \
@@ -2099,7 +2099,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c) do { \ __asm__ __volatile__( \ ".set\tpush\n\t" \ - ".set\tmips32r2\n\t" \ + ".set\tmips32r5\n\t" \ _ASM_SET_VIRT \ "mtgc0\t%z0, " #register ", %1\n\t" \ ".set\tpop" \
@@ -2111,7 +2111,7 @@ do { \ do { \ __asm__ __volatile__( \ ".set\tpush\n\t" \ - ".set\tmips64r2\n\t" \ + ".set\tmips64r5\n\t" \ _ASM_SET_VIRT \ "dmtgc0\t%z0, " #register ", %1\n\t" \ ".set\tpop" \
Signature · 1 line
2.30.2
Greg Kroah-Hartman
maintainerPATCH 133/215 selftests/resctrl: Fix incorrect parsing of option "-t"
In reply to Greg Kroah-HartmanFrom: Xiaochen Shen <[email protected]>
commit 1421ec684a43379b2aa3cfda20b03d38282dc990 upstream.
Resctrl test suite accepts command line argument "-t" to specify the unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as documented in the help.
When calling strtok() to parse the option, the incorrect delimiters argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws an invalid option error.
Fix this by using delimiters argument "," instead of ":\t" for parsing of unit tests list. At the same time, remove the unnecessary "spaces" between the unit tests in help documentation to prevent confusion.
--- tools/testing/selftests/resctrl/README | 2 +- tools/testing/selftests/resctrl/resctrl_tests.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/resctrl/README +1 -1
@@ -47,7 +47,7 @@ Parameter '-h' shows usage information. usage: resctrl_tests [-h] [-b "benchmark_cmd [options]"] [-t test list] [-n no_of_bits] -b benchmark_cmd [options]: run specified benchmark for MBM, MBA and CQM default benchmark is builtin fill_buf - -t test list: run tests specified in the test list, e.g. -t mbm, mba, cqm, cat + -t test list: run tests specified in the test list, e.g. -t mbm,mba,cqm,cat -n no_of_bits: run cache tests using specified no of bits in cache bit mask -p cpu_no: specify CPU number to run the test. 1 is default -h: help
tools/testing/selftests/resctrl/resctrl_tests.c +2 -2
@@ -40,7 +40,7 @@ static void cmd_help(void)printf ("\t-b benchmark_cmd [options]: run specified benchmark for MBM, MBA and CQM" );printf ("\t default benchmark is builtin fill_buf\n" );printf ("\t-t test list: run tests specified in the test list, " ); -printf ("e.g. -t mbm, mba, cqm, cat\n" ); +printf ("e.g. -t mbm,mba,cqm,cat\n" );printf ("\t-n no_of_bits: run cache tests using specified no of bits in cache bit mask\n" );printf ("\t-p cpu_no: specify CPU number to run the test. 1 is default\n" );printf ("\t-h: help\n" );
@@ -98,7 +98,7 @@ int main(int argc, char **argv)return -1 ; } - token =strtok (NULL ,":\t" ); + token =strtok (NULL ,"," ); }break ;case 'p' :
Greg Kroah-Hartman
maintainerPATCH 134/215 MIPS: MT extensions are not available on MIPS32r1
In reply to Greg Kroah-HartmanFrom: Paul Cercueil <[email protected]>
commit cad065ed8d8831df67b9754cc4437ed55d8b48c0 upstream.
MIPS MT extensions were added with the MIPS 34K processor, which was based on the MIPS32r2 ISA.
This fixes a build error when building a generic kernel for a MIPS32r1 CPU.
--- arch/mips/include/asm/cpu-features.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/mips/include/asm/cpu-features.h +3 -1
@@ -64,6 +64,8 @@ ((MIPS_ISA_REV >= (ge)) && (MIPS_ISA_REV < (lt)))#define __isa_range_or_flag (ge, lt, flag) \ (__isa_range(ge, lt) || ((MIPS_ISA_REV < (lt)) && __isa(flag))) +#define __isa_range_and_ase (ge, lt, ase) \ + (__isa_range(ge, lt) && __ase(ase))/* * SMP assumption: Options of CPU 0 are a superset of all processors.
@@ -423,7 +425,7 @@#endif #ifndef cpu_has_mipsmt -#define cpu_has_mipsmt __isa_lt_and_ase(6, MIPS_ASE_MIPSMT) +#define cpu_has_mipsmt __isa_range_and_ase(2, 6, MIPS_ASE_MIPSMT)#endif #ifndef cpu_has_vp
Greg Kroah-Hartman
maintainerPATCH 135/215 ath11k: unlock on error path in ath11k_mac_op_add_interface()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit 59ec8e2fa5aaed6afd18d5362dc131aab92406e7 upstream.
These error paths need to drop the &ar->conf_mutex before returning.
--- drivers/net/wireless/ath/ath11k/mac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath11k/mac.c +2 -2
@@ -4603,13 +4603,13 @@ err_peer_del:if (ret) {ath11k_warn (ar->ab,"failed to delete peer vdev_id %d addr %pM\n" , arvif->vdev_id, vif->addr); -return ret; + goto err; } ret =ath11k_wait_for_peer_delete_done (ar, arvif->vdev_id, vif->addr);if (ret) -return ret; + goto err; ar->num_peers--; }
Greg Kroah-Hartman
maintainerPATCH 136/215 arm64: dts: rockchip: add rk3328 dwc3 usb controller node
In reply to Greg Kroah-HartmanFrom: Cameron Nemo <[email protected]>
commit 44dd5e2106dc2fd01697b539085818d1d1c58df0 upstream.
RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3 core's general architecture. It can act as static xHCI host controller, static device controller, USB 3.0/2.0 OTG basing on ID of USB3.0 PHY.
--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328.dtsi +19 -0
@@ -984,6 +984,25 @@ status = "disabled"; }; + usbdrd3: usb@ff600000 { + compatible = "rockchip,rk3328-dwc3", "snps,dwc3"; + reg = <0x0 0xff600000 0x0 0x100000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>, + <&cru ACLK_USB3OTG>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + snps,dis-del-phy-power-chg-quirk; + snps,dis_enblslpm_quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + status = "disabled"; + }; + gic: interrupt-controller@ff811000 { compatible = "arm,gic-400"; #interrupt-cells = <3>;
Greg Kroah-Hartman
maintainerPATCH 137/215 arm64: dts: rockchip: Enable USB3 for rk3328 Rock64
In reply to Greg Kroah-HartmanFrom: Cameron Nemo <[email protected]>
commit bbac8bd65f5402281cb7b0452c1c5f367387b459 upstream.
Enable USB3 nodes for the rk3328-based PINE Rock64 board.
The separate power regulator is not added as it is controlled by the same GPIO line as the existing VBUS regulators, so it is already enabled. Also there is no port representation to tie the regulator to.
[[email protected]: Rebased onto v5.12]
--- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +5 -0
@@ -384,6 +384,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; };
Greg Kroah-Hartman
maintainerPATCH 138/215 mm/page_alloc: fix memory map initialization for descending nodes
In reply to Greg Kroah-HartmanFrom: Mike Rapoport <[email protected]>
commit 122e093c1734361dedb64f65c99b93e28e4624f4 upstream.
On systems with memory nodes sorted in descending order, for instance Dell Precision WorkStation T5500, the struct pages for higher PFNs and respectively lower nodes, could be overwritten by the initialization of struct pages corresponding to the holes in the memory sections.
For example for the below memory layout
[ 0.245624] Early memory node ranges [ 0.248496] node 1: [mem 0x0000000000001000-0x0000000000090fff] [ 0.251376] node 1: [mem 0x0000000000100000-0x00000000dbdf8fff] [ 0.254256] node 1: [mem 0x0000000100000000-0x0000001423ffffff] [ 0.257144] node 0: [mem 0x0000001424000000-0x0000002023ffffff]
the range 0x1424000000 - 0x1428000000 in the beginning of node 0 starts in the middle of a section and will be considered as a hole during the initialization of the last section in node 1.
The wrong initialization of the memory map causes panic on boot when CONFIG_DEBUG_VM is enabled.
Reorder loop order of the memory map initialization so that the outer loop will always iterate over populated memory regions in the ascending order and the inner loop will select the zone corresponding to the PFN range.
This way initialization of the struct pages for the memory holes will be always done for the ranges that are actually not populated.
[[email protected]: coding style fixes]
--- mm/page_alloc.c | 100 +++++++++++++++++++++++++++++++++----------------------- 1 file changed, 60 insertions(+), 40 deletions(-)
mm/page_alloc.c +60 -40
@@ -6129,7 +6129,7 @@ void __ref memmap_init_zone_device(strucreturn ;/* -* The call to memmap_init_zone should have already taken care +* The call to memmap_init should have already taken care * of the pages reserved for the memmap, so we can just jump to * the end of that region and start processing the device pages. */
@@ -6194,7 +6194,7 @@ static void __meminit zone_init_free_lis/* * Only struct pages that correspond to ranges defined by memblock.memory * are zeroed and initialized by going through __init_single_page() during -* memmap_init_zone(). +* memmap_init_zone_range(). * * But, there could be struct pages that correspond to holes in * memblock.memory. This can happen because of the following reasons:
@@ -6213,9 +6213,9 @@ static void __meminit zone_init_free_lis* zone/node above the hole except for the trailing pages in the last * section that will be appended to the zone/node below. */ -static u64 __meminit init_unavailable_range (unsigned long spfn, -unsigned long epfn, -int zone,int node) +static void __init init_unavailable_range (unsigned long spfn, +unsigned long epfn, +int zone,int node) {unsigned long pfn;u64 pgcnt =0 ;
@@ -6231,58 +6231,77 @@ static u64 __meminit init_unavailable_ra pgcnt++; } -return pgcnt; +if (pgcnt) +pr_info ("On node %d, zone %s: %lld pages in unavailable ranges" , + node, zone_names[zone], pgcnt); }#else -static inline u64 init_unavailable_range (unsigned long spfn,unsigned long epfn, -int zone,int node) +static inline void init_unavailable_range (unsigned long spfn, +unsigned long epfn, +int zone,int node) { -return 0 ; }#endif -void __meminit __weak memmap_init (unsigned long size,int nid, -unsigned long zone, -unsigned long range_start_pfn) +static void __init memmap_init_zone_range (struct zone *zone, +unsigned long start_pfn, +unsigned long end_pfn, +unsigned long *hole_pfn) +{ +unsigned long zone_start_pfn = zone->zone_start_pfn; +unsigned long zone_end_pfn = zone_start_pfn + zone->spanned_pages; +int nid =zone_to_nid (zone), zone_id =zone_idx (zone); + + start_pfn =clamp (start_pfn, zone_start_pfn, zone_end_pfn); + end_pfn =clamp (end_pfn, zone_start_pfn, zone_end_pfn); + +if (start_pfn >= end_pfn) +return ; + +memmap_init_zone (end_pfn - start_pfn, nid, zone_id, start_pfn, + zone_end_pfn,MEMINIT_EARLY ,NULL ,MIGRATE_MOVABLE ); + +if (*hole_pfn < start_pfn) +init_unavailable_range (*hole_pfn, start_pfn, zone_id, nid); + + *hole_pfn = end_pfn; +} + +void __init __weak memmap_init (void ) { -static unsigned long hole_pfn;unsigned long start_pfn, end_pfn; -unsigned long range_end_pfn = range_start_pfn + size; -int i; -u64 pgcnt =0 ; +unsigned long hole_pfn =0 ; +int i, j, zone_id, nid; -for_each_mem_pfn_range (i, nid, &start_pfn, &end_pfn,NULL ) { - start_pfn =clamp (start_pfn, range_start_pfn, range_end_pfn); - end_pfn =clamp (end_pfn, range_start_pfn, range_end_pfn); +for_each_mem_pfn_range (i,MAX_NUMNODES , &start_pfn, &end_pfn, &nid) { +struct pglist_data *node =NODE_DATA (nid); -if (end_pfn > start_pfn) { - size = end_pfn - start_pfn; -memmap_init_zone (size, nid, zone, start_pfn, range_end_pfn, -MEMINIT_EARLY ,NULL ,MIGRATE_MOVABLE ); - } +for (j =0 ; j <MAX_NR_ZONES ; j++) { +struct zone *zone = node->node_zones + j; -if (hole_pfn < start_pfn) - pgcnt +=init_unavailable_range (hole_pfn, start_pfn, - zone, nid); - hole_pfn = end_pfn; +if (!populated_zone (zone)) +continue ; + +memmap_init_zone_range (zone, start_pfn, end_pfn, + &hole_pfn); + zone_id = j; + } }#ifdef CONFIG_SPARSEMEM /* -* Initialize the hole in the range [zone_end_pfn, section_end]. -* If zone boundary falls in the middle of a section, this hole -* will be re-initialized during the call to this function for the -* higher zone. +* Initialize the memory map for hole in the range [memory_end, +* section_end]. +* Append the pages in this hole to the highest zone in the last +* node. +* The call to init_unavailable_range() is outside the ifdef to +* silence the compiler warining about zone_id set but not used; +* for FLATMEM it is a nop anyway */ - end_pfn =round_up (range_end_pfn,PAGES_PER_SECTION ); + end_pfn =round_up (end_pfn,PAGES_PER_SECTION ); if (hole_pfn < end_pfn) - pgcnt +=init_unavailable_range (hole_pfn, end_pfn, - zone, nid);#endif - -if (pgcnt) -pr_info (" %s zone: %llu pages in unavailable ranges\n" , - zone_names[zone], pgcnt); +init_unavailable_range (hole_pfn, end_pfn, zone_id, nid); }static int zone_batchsize (struct zone *zone)
@@ -6981,7 +7000,6 @@ static void __init free_area_init_core(sset_pageblock_order ();setup_usemap (pgdat, zone, zone_start_pfn, size);init_currently_empty_zone (zone, zone_start_pfn, size); -memmap_init (size, nid, j, zone_start_pfn); } }
@@ -7507,6 +7525,8 @@ void __init free_area_init(unsigned longnode_set_state (nid,N_MEMORY );check_for_memory (pgdat, nid); } + +memmap_init (); } static int __init cmdline_parse_core(char *p, unsigned long *core,
Greg Kroah-Hartman
maintainerPATCH 139/215 loop: fix I/O error on fsync() in detached loop devices
In reply to Greg Kroah-HartmanFrom: Mauricio Faria de Oliveira <[email protected]>
commit 4ceddce55eb35d15b0f87f5dcf6f0058fd15d3a4 upstream.
There's an I/O error on fsync() in a detached loop device if it has been previously attached.
The issue is write cache is enabled in the attach path in loop_configure() but it isn't disabled in the detach path; thus it remains enabled in the block device regardless of whether it is attached or not.
Now fsync() can get an I/O request that will just be failed later in loop_queue_rq() as device's state is not 'Lo_bound'.
So, disable write cache in the detach path.
Do so based on the queue flag, not the loop device flag for read-only (used to enable) as the queue flag can be changed via sysfs even on read-only loop devices (e.g., losetup -r.)
Test-case:
# DEV=/dev/loop7
# IMG=/tmp/image
# truncate --size 1M $IMG
# losetup $DEV $IMG
# losetup -d $DEV
Before:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = -1 EIO (Input/output error)
Warning: Error fsyncing/closing /dev/loop7: Input/output error
[ 982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0After:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = 0--- drivers/block/loop.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/block/loop.c +3 -0
@@ -1224,6 +1224,9 @@ static int __loop_clr_fd(struct loop_dev goto out_unlock; } +if (test_bit (QUEUE_FLAG_WC , &lo->lo_queue->queue_flags)) +blk_queue_write_cache (lo->lo_queue, false, false); +/* freeze request queue during the transition */ blk_mq_freeze_queue (lo->lo_queue);
Greg Kroah-Hartman
maintainerPATCH 140/215 mm,hwpoison: return -EBUSY when migration fails
In reply to Greg Kroah-HartmanFrom: Oscar Salvador <[email protected]>
commit 3f4b815a439adfb8f238335612c4b28bc10084d8
Currently, we return -EIO when we fail to migrate the page.
Migrations' failures are rather transient as they can happen due to several reasons, e.g: high page refcount bump, mapping->migrate_page failing etc. All meaning that at that time the page could not be migrated, but that has nothing to do with an EIO error.
Let us return -EBUSY instead, as we do in case we failed to isolate the page.
While are it, let us remove the "ret" print as its value does not change.
--- mm/memory-failure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
mm/memory-failure.c +3 -3
@@ -1856,11 +1856,11 @@ static int __soft_offline_page(struct papr_info ("soft offline: %#lx: %s migration failed %d, type %lx (%pGp)\n" , pfn, msg_page[huge], ret, page->flags, &page->flags);if (ret >0 ) - ret = -EIO ; + ret = -EBUSY ; } }else { -pr_info ("soft offline: %#lx: %s isolation failed: %d, page count %d, type %lx (%pGp)\n" , - pfn, msg_page[huge], ret,page_count (page), page->flags, &page->flags); +pr_info ("soft offline: %#lx: %s isolation failed, page count %d, type %lx (%pGp)\n" , + pfn, msg_page[huge],page_count (page), page->flags, &page->flags); ret = -EBUSY ; }return ret;
Re: [PATCH 5.10 140/215] mm,hwpoison: return -EBUSY when migration fails
Hi!
Quoted 3 lines
From: Oscar Salvador <[email protected]>
commit
3f4b815a439adfb8f238335612c4b28bc10084d8
Another format of marking upstream commits. How are this is number 8 or so. I have scripts trying to parse this, and I don't believe I'm the only one.
Quoted 7 lines
Signed-off-by Oscar Salvador <[email protected]>Acked-by Naoya Horiguchi <[email protected]>Acked-by Vlastimil Babka <[email protected]>Cc David Hildenbrand <[email protected]>Signed-off-by Andrew Morton <[email protected]>Signed-off-by Linus Torvalds <[email protected]>
Could se simply place Upstream: <hash> tag here? That should discourage such "creativity"... plus it will make it clear who touched patch in mainline context and who in stable context.
Best regards,
Pavel
Signature · 1 line
http://www.livejournal.com/~pavelmachek
Re: [PATCH 5.10 140/215] mm,hwpoison: return -EBUSY when migration fails
Quoted 18 lines · Pavel Machek
Hi!
Quoted 3 lines
From: Oscar Salvador <[email protected]>
commit
3f4b815a439adfb8f238335612c4b28bc10084d8Another format of marking upstream commits. How are this is number 8 or so. I have scripts trying to parse this, and I don't believe I'm the only one.
Quoted 7 lines
Signed-off-by Oscar Salvador <[email protected]>Acked-by Naoya Horiguchi <[email protected]>Acked-by Vlastimil Babka <[email protected]>Cc David Hildenbrand <[email protected]>Signed-off-by Andrew Morton <[email protected]>Signed-off-by Linus Torvalds <[email protected]>
Quoted 3 lines
Could se simply place Upstream: <hash> tag here? That should discourage such "creativity"... plus it will make it clear who touched patch in mainline context and who in stable context.
This is properly documented
https://www.kernel.org/doc/html/v5.14-rc1//process/stable-kernel-rules.html
"
The upstream commit ID must be specified with a separate line above the commit text, like this:
commit <sha1> upstream.
"
Signature · 3 lines
Thanks, David / dhildenb
Greg Kroah-Hartman
maintainerRe: [PATCH 5.10 140/215] mm,hwpoison: return -EBUSY when migration fails
In reply to Pavel MachekQuoted 9 lines · Pavel Machek
Hi!
Quoted 3 lines
From: Oscar Salvador <[email protected]>
commit
3f4b815a439adfb8f238335612c4b28bc10084d8Another format of marking upstream commits. How are this is number 8 or so. I have scripts trying to parse this, and I don't believe I'm the only one.
You aren't just searching for the full sha1? Anyway, added back the "upstream" word...
Greg Kroah-Hartman
maintainerPATCH 141/215 io_uring: simplify io_remove_personalities()
In reply to Greg Kroah-HartmanFrom: Yejune Deng <[email protected]>
commit 0bead8cd39b9c9c7c4e902018ccf129107ac50ef upstream.
The function io_remove_personalities() is very similar to io_unregister_personality(),so implement io_remove_personalities() calling io_unregister_personality().
--- fs/io_uring.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-)
fs/io_uring.c +11 -17
@@ -8505,9 +8505,8 @@ static int io_uring_fasync(int fd, strucreturn fasync_helper (fd, file, on, &ctx->cq_fasync); } -static int io_remove_personalities (int id,void *p,void *data) +static int io_unregister_personality (struct io_ring_ctx *ctx,unsigned id) { -struct io_ring_ctx *ctx = data;struct io_identity *iod; iod =idr_remove (&ctx->personality_idr, id);
@@ -8515,7 +8514,17 @@ static int io_remove_personalities(int iput_cred (iod->creds);if (refcount_dec_and_test (&iod->count))kfree (iod); +return 0 ; } + +return -EINVAL ; +} + +static int io_remove_personalities (int id,void *p,void *data) +{ +struct io_ring_ctx *ctx = data; + +io_unregister_personality (ctx, id);return 0 ; }
@@ -9606,21 +9615,6 @@ static int io_register_personality(strucreturn ret; } -static int io_unregister_personality (struct io_ring_ctx *ctx,unsigned id) -{ -struct io_identity *iod; - - iod =idr_remove (&ctx->personality_idr, id); -if (iod) { -put_cred (iod->creds); -if (refcount_dec_and_test (&iod->count)) -kfree (iod); -return 0 ; - } - -return -EINVAL ; -} -static int io_register_restrictions (struct io_ring_ctx *ctx,void __user *arg,unsigned int nr_args) {
Greg Kroah-Hartman
maintainerPATCH 142/215 io_uring: Convert personality_idr to XArray
In reply to Greg Kroah-HartmanFrom: "Matthew Wilcox (Oracle)" <[email protected]>
commit 61cf93700fe6359552848ed5e3becba6cd760efa upstream.
You can't call idr_remove() from within a idr_for_each() callback, but you can call xa_erase() from an xa_for_each() loop, so switch the entire personality_idr from the IDR to the XArray. This manifests as a use-after-free as idr_for_each() attempts to walk the rest of the node after removing the last entry from it.
--- fs/io_uring.c | 59 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 30 insertions(+), 29 deletions(-)
fs/io_uring.c +30 -29
@@ -346,7 +346,8 @@ struct io_ring_ctx {struct idr io_buffer_idr; -struct idr personality_idr; +struct xarray personalities; +u32 pers_next;struct {unsigned cached_cq_tail;
@@ -1212,7 +1213,7 @@ static struct io_ring_ctx *io_ring_ctx_ainit_completion (&ctx->ref_comp);init_completion (&ctx->sq_thread_comp);idr_init (&ctx->io_buffer_idr); -idr_init (&ctx->personality_idr); +xa_init_flags (&ctx->personalities,XA_FLAGS_ALLOC1 );mutex_init (&ctx->uring_lock);init_waitqueue_head (&ctx->wait);spin_lock_init (&ctx->completion_lock);
@@ -6629,7 +6630,7 @@ static int io_init_req(struct io_ring_ctif (id) {struct io_identity *iod; - iod =idr_find (&ctx->personality_idr, id); + iod =xa_load (&ctx->personalities, id);if (unlikely (!iod))return -EINVAL ;refcount_inc (&iod->count);
@@ -8445,7 +8446,6 @@ static void io_ring_ctx_free(struct io_rio_sqe_files_unregister (ctx);io_eventfd_unregister (ctx);io_destroy_buffers (ctx); -idr_destroy (&ctx->personality_idr);#if defined(CONFIG_UNIX )if (ctx->ring_sock) {
@@ -8509,7 +8509,7 @@ static int io_unregister_personality(str {struct io_identity *iod; - iod =idr_remove (&ctx->personality_idr, id); + iod =xa_erase (&ctx->personalities, id);if (iod) {put_cred (iod->creds);if (refcount_dec_and_test (&iod->count))
@@ -8520,14 +8520,6 @@ static int io_unregister_personality(strreturn -EINVAL ; } -static int io_remove_personalities (int id,void *p,void *data) -{ -struct io_ring_ctx *ctx = data; - -io_unregister_personality (ctx, id); -return 0 ; -} -static void io_ring_exit_work (struct work_struct *work) { struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx,
@@ -8554,6 +8546,9 @@ static bool io_cancel_ctx_cb(struct io_wstatic void io_ring_ctx_wait_and_kill (struct io_ring_ctx *ctx) { +unsigned long index; +struct io_identify *iod; +mutex_lock (&ctx->uring_lock);percpu_ref_kill (&ctx->refs);/* if force is set, the ring is going away. always drop after that */
@@ -8574,7 +8569,8 @@ static void io_ring_ctx_wait_and_kill(st/* if we failed setting up the ctx, we might not have any rings */ io_iopoll_try_reap_events (ctx); -idr_for_each (&ctx->personality_idr, io_remove_personalities, ctx); +xa_for_each (&ctx->personalities, index, iod) +io_unregister_personality (ctx, index);/* * Do this upfront, so we won't have a grace period where the ring
@@ -9137,11 +9133,10 @@ out_fput: }#ifdef CONFIG_PROC_FS -static int io_uring_show_cred (int id,void *p,void *data) +static int io_uring_show_cred (struct seq_file *m,unsigned int id, +const struct io_identity *iod) { -struct io_identity *iod = p;const struct cred *cred = iod->creds; -struct seq_file *m = data;struct user_namespace *uns =seq_user_ns (m);struct group_info *gi;kernel_cap_t cap;
@@ -9209,9 +9204,13 @@ static void __io_uring_show_fdinfo(strucseq_printf (m,"%5u: 0x%llx/%u\n" , i, buf->ubuf, (unsigned int ) buf->len); } -if (has_lock && !idr_is_empty (&ctx->personality_idr)) { +if (has_lock && !xa_empty (&ctx->personalities)) { +unsigned long index; +const struct io_identity *iod; +seq_printf (m,"Personalities:\n" ); -idr_for_each (&ctx->personality_idr, io_uring_show_cred, m); +xa_for_each (&ctx->personalities, index, iod) +io_uring_show_cred (m, index, iod); }seq_printf (m,"PollList:\n" );spin_lock_irq (&ctx->completion_lock);
@@ -9597,21 +9596,23 @@ out:static int io_register_personality (struct io_ring_ctx *ctx) { -struct io_identity *id; +struct io_identity *iod; +u32 id;int ret; - id =kmalloc (sizeof (*id),GFP_KERNEL ); -if (unlikely (!id)) + iod =kmalloc (sizeof (*iod),GFP_KERNEL ); +if (unlikely (!iod))return -ENOMEM ; -io_init_identity (id); - id->creds =get_current_cred (); +io_init_identity (iod); + iod->creds =get_current_cred (); - ret =idr_alloc_cyclic (&ctx->personality_idr, id,1 ,USHRT_MAX ,GFP_KERNEL ); -if (ret <0 ) { -put_cred (id->creds); -kfree (id); - } + ret =xa_alloc_cyclic (&ctx->personalities, &id, (void *)iod, +XA_LIMIT (0 ,USHRT_MAX ), &ctx->pers_next,GFP_KERNEL ); +if (!ret) +return id; +put_cred (iod->creds); +kfree (iod);return ret; }
Greg Kroah-Hartman
maintainerPATCH 143/215 io_uring: convert io_buffer_idr to XArray
In reply to Greg Kroah-HartmanFrom: Jens Axboe <[email protected]>
commit 9e15c3a0ced5a61f320b989072c24983cb1620c1 upstream.
Like we did for the personality idr, convert the IO buffer idr to use XArray. This avoids a use-after-free on removal of entries, since idr doesn't like doing so from inside an iterator, and it nicely reduces the amount of code we need to support this feature.
--- fs/io_uring.c | 43 +++++++++++++++---------------------------- 1 file changed, 15 insertions(+), 28 deletions(-)
fs/io_uring.c +15 -28
@@ -344,7 +344,7 @@ struct io_ring_ctx {struct socket *ring_sock;#endif -struct idr io_buffer_idr; +struct xarray io_buffers;struct xarray personalities;u32 pers_next;
@@ -1212,7 +1212,7 @@ static struct io_ring_ctx *io_ring_ctx_aINIT_LIST_HEAD (&ctx->cq_overflow_list);init_completion (&ctx->ref_comp);init_completion (&ctx->sq_thread_comp); -idr_init (&ctx->io_buffer_idr); +xa_init_flags (&ctx->io_buffers,XA_FLAGS_ALLOC1 );xa_init_flags (&ctx->personalities,XA_FLAGS_ALLOC1 );mutex_init (&ctx->uring_lock);init_waitqueue_head (&ctx->wait);
@@ -2990,7 +2990,7 @@ static struct io_buffer *io_buffer_seleclockdep_assert_held (&req->ctx->uring_lock); - head =idr_find (&req->ctx->io_buffer_idr, bgid); + head =xa_load (&req->ctx->io_buffers, bgid);if (head) {if (!list_empty (&head->list)) { kbuf = list_last_entry(&head->list, struct io_buffer,
@@ -2998,7 +2998,7 @@ static struct io_buffer *io_buffer_seleclist_del (&kbuf->list); }else { kbuf = head; -idr_remove (&req->ctx->io_buffer_idr, bgid); +xa_erase (&req->ctx->io_buffers, bgid); }if (*len > kbuf->len) *len = kbuf->len;
@@ -3960,7 +3960,7 @@ static int __io_remove_buffers(struct io } i++;kfree (buf); -idr_remove (&ctx->io_buffer_idr, bgid); +xa_erase (&ctx->io_buffers, bgid);return i; }
@@ -3978,7 +3978,7 @@ static int io_remove_buffers(struct io_klockdep_assert_held (&ctx->uring_lock); ret = -ENOENT ; - head =idr_find (&ctx->io_buffer_idr, p->bgid); + head =xa_load (&ctx->io_buffers, p->bgid);if (head) ret =__io_remove_buffers (ctx, head, p->bgid, p->nbufs);if (ret <0 )
@@ -4069,21 +4069,14 @@ static int io_provide_buffers(struct io_lockdep_assert_held (&ctx->uring_lock); - list = head =idr_find (&ctx->io_buffer_idr, p->bgid); + list = head =xa_load (&ctx->io_buffers, p->bgid); ret =io_add_buffers (p, &head); -if (ret <0 ) - goto out; - -if (!list) { - ret =idr_alloc (&ctx->io_buffer_idr, head, p->bgid, p->bgid +1 , -GFP_KERNEL ); -if (ret <0 ) { +if (ret >=0 && !list) { + ret =xa_insert (&ctx->io_buffers, p->bgid, head,GFP_KERNEL ); +if (ret <0 )__io_remove_buffers (ctx, head, p->bgid,-1U ); - goto out; - } } -out:if (ret <0 )req_set_fail_links (req);
@@ -8411,19 +8404,13 @@ static int io_eventfd_unregister(structreturn -ENXIO ; } -static int __io_destroy_buffers (int id,void *p,void *data) -{ -struct io_ring_ctx *ctx = data; -struct io_buffer *buf = p; - -__io_remove_buffers (ctx, buf, id,-1U ); -return 0 ; -} -static void io_destroy_buffers (struct io_ring_ctx *ctx) { -idr_for_each (&ctx->io_buffer_idr, __io_destroy_buffers, ctx); -idr_destroy (&ctx->io_buffer_idr); +struct io_buffer *buf; +unsigned long index; + +xa_for_each (&ctx->io_buffers, index, buf) +__io_remove_buffers (ctx, buf, index,-1U ); }static void io_ring_ctx_free (struct io_ring_ctx *ctx)
Greg Kroah-Hartman
maintainerPATCH 144/215 scsi: iscsi: Fix race condition between login and sync thread
In reply to Greg Kroah-HartmanFrom: Gulam Mohamed <[email protected]>
commit 9e67600ed6b8565da4b85698ec659b5879a6c1c6 upstream.
A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP
--- drivers/scsi/scsi_transport_iscsi.c | 14 +++++++++++++- include/scsi/scsi_transport_iscsi.h | 1 + 2 files changed, 14 insertions(+), 1 deletion(-)
drivers/scsi/scsi_transport_iscsi.c +13 -1
@@ -2480,6 +2480,7 @@ static void iscsi_if_stop_conn(struct is*/ mutex_lock (&conn_mutex); conn->transport->stop_conn (conn, flag); + conn->state =ISCSI_CONN_DOWN ;mutex_unlock (&conn_mutex); }
@@ -2906,6 +2907,13 @@ iscsi_set_param(struct iscsi_transport *default : err = transport->set_param (conn, ev->u.set_param.param, data, ev->u.set_param.len); +if ((conn->state ==ISCSI_CONN_BOUND ) || + (conn->state ==ISCSI_CONN_UP )) { + err = transport->set_param (conn, ev->u.set_param.param, + data, ev->u.set_param.len); + }else { +return -ENOTCONN ; + } }return err;
@@ -2965,6 +2973,7 @@ static int iscsi_if_ep_disconnect(structmutex_lock (&conn->ep_mutex); conn->ep =NULL ;mutex_unlock (&conn->ep_mutex); + conn->state =ISCSI_CONN_DOWN ; } transport->ep_disconnect (ep);
@@ -3732,6 +3741,8 @@ iscsi_if_recv_msg(struct sk_buff *skb, s ev->r.retcode = transport->bind_conn (session, conn, ev->u.b_conn.transport_eph, ev->u.b_conn.is_leading); +if (!ev->r.retcode) + conn->state =ISCSI_CONN_BOUND ;mutex_unlock (&conn_mutex);if (ev->r.retcode || !transport->ep_connect)
@@ -3971,7 +3982,8 @@ iscsi_conn_attr(local_ipaddr, ISCSI_PARAstatic const char *const connection_state_names[] = { [ISCSI_CONN_UP ] ="up" , [ISCSI_CONN_DOWN ] ="down" , - [ISCSI_CONN_FAILED ] ="failed" + [ISCSI_CONN_FAILED ] ="failed" , + [ISCSI_CONN_BOUND ] ="bound" }; static ssize_t show_conn_state(struct device *dev,
include/scsi/scsi_transport_iscsi.h +1 -0
@@ -193,6 +193,7 @@ enum iscsi_connection_state {ISCSI_CONN_UP =0 ,ISCSI_CONN_DOWN ,ISCSI_CONN_FAILED , + ISCSI_CONN_BOUND, }; struct iscsi_cls_conn {
Greg Kroah-Hartman
maintainerPATCH 145/215 scsi: iscsi: Fix iSCSI cls conn state
In reply to Greg Kroah-HartmanFrom: Mike Christie <[email protected]>
commit 0dcf8febcb7b9d42bec98bc068e01d1a6ea578b8 upstream.
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread") I missed that libiscsi was now setting the iSCSI class state, and that patch ended up resetting the state during conn stoppage and using the wrong state value during ep_disconnect. This patch moves the setting of the class state to the class module and then fixes the two issues above.
--- drivers/scsi/libiscsi.c | 26 +++----------------------- drivers/scsi/scsi_transport_iscsi.c | 18 +++++++++++++++--- 2 files changed, 18 insertions(+), 26 deletions(-)
drivers/scsi/libiscsi.c +3 -23
@@ -3089,9 +3089,10 @@ fail_mgmt_tasks(struct iscsi_session *se } } -static void iscsi_start_session_recovery (struct iscsi_session *session, -struct iscsi_conn *conn,int flag) +void iscsi_conn_stop (struct iscsi_cls_conn *cls_conn,int flag) { +struct iscsi_conn *conn = cls_conn->dd_data; +struct iscsi_session *session = conn->session;int old_stop_stage;mutex_lock (&session->eh_mutex);
@@ -3149,27 +3150,6 @@ static void iscsi_start_session_recoveryspin_unlock_bh (&session->frwd_lock);mutex_unlock (&session->eh_mutex); } - -void iscsi_conn_stop (struct iscsi_cls_conn *cls_conn,int flag) -{ -struct iscsi_conn *conn = cls_conn->dd_data; -struct iscsi_session *session = conn->session; - -switch (flag) { -case STOP_CONN_RECOVER : - cls_conn->state =ISCSI_CONN_FAILED ; -break ; -case STOP_CONN_TERM : - cls_conn->state =ISCSI_CONN_DOWN ; -break ; -default : -iscsi_conn_printk (KERN_ERR , conn, -"invalid stop flag %d\n" , flag); -return ; - } - -iscsi_start_session_recovery (session, conn, flag); -}EXPORT_SYMBOL_GPL (iscsi_conn_stop); int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
drivers/scsi/scsi_transport_iscsi.c +15 -3
@@ -2479,10 +2479,22 @@ static void iscsi_if_stop_conn(struct is* it works. */ mutex_lock (&conn_mutex); +switch (flag) { +case STOP_CONN_RECOVER : + conn->state =ISCSI_CONN_FAILED ; +break ; +case STOP_CONN_TERM : + conn->state =ISCSI_CONN_DOWN ; +break ; +default : +iscsi_cls_conn_printk (KERN_ERR , conn, +"invalid stop flag %d\n" , flag); + goto unlock; + } + conn->transport->stop_conn (conn, flag); - conn->state =ISCSI_CONN_DOWN ; +unlock:mutex_unlock (&conn_mutex); - }static void stop_conn_work_fn (struct work_struct *work)
@@ -2973,7 +2985,7 @@ static int iscsi_if_ep_disconnect(structmutex_lock (&conn->ep_mutex); conn->ep =NULL ;mutex_unlock (&conn->ep_mutex); - conn->state =ISCSI_CONN_DOWN ; + conn->state =ISCSI_CONN_FAILED ; } transport->ep_disconnect (ep);
Greg Kroah-Hartman
maintainerPATCH 146/215 powerpc/mm: Fix lockup on kernel exec fault
In reply to Greg Kroah-HartmanFrom: Christophe Leroy <[email protected]>
commit cd5d5e602f502895e47e18cd46804d6d7014e65c upstream.
The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter().
Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3.
--- arch/powerpc/mm/fault.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/powerpc/mm/fault.c +1 -3
@@ -198,9 +198,7 @@ static bool bad_kernel_fault(struct pt_r {int is_exec =TRAP (regs) ==0x400 ; -/* NX faults set DSISR_PROTFAULT on the 8xx, DSISR_NOEXEC_OR_G on others */ -if (is_exec && (error_code & (DSISR_NOEXEC_OR_G |DSISR_KEYFAULT | -DSISR_PROTFAULT ))) { +if (is_exec) { pr_crit_ratelimited("kernel tried to execute %s page (%lx) - exploit attempt? (uid: %d)\n", address >= TASK_SIZE ? "exec-protected" : "user", address,
Greg Kroah-Hartman
maintainerPATCH 147/215 powerpc/barrier: Avoid collision with clangs __lwsync macro
In reply to Greg Kroah-HartmanFrom: Nathan Chancellor <[email protected]>
commit 015d98149b326e0f1f02e44413112ca8b4330543 upstream.
A change in clang 13 results in the __lwsync macro being defined as __builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what the target supports. This breaks the build because of -Werror in arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^1 error generated.
Undefine this macro so that the runtime patching introduced by commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to work properly with clang and the build no longer breaks.
--- arch/powerpc/include/asm/barrier.h | 2 ++ 1 file changed, 2 insertions(+)
arch/powerpc/include/asm/barrier.h +2 -0
@@ -46,6 +46,8 @@# define SMPWMB eieio#endif +/* clang defines this macro for a builtin, which will not work with runtime patching */ +#undef __lwsync#define __lwsync () __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")#define dma_rmb () __lwsync()#define dma_wmb () __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
Greg Kroah-Hartman
maintainerPATCH 148/215 powerpc/powernv/vas: Release reference to tgid during window close
In reply to Greg Kroah-HartmanFrom: Haren Myneni <[email protected]>
commit 91cdbb955aa94ee0841af4685be40937345d29b8 upstream.
The kernel handles the NX fault by updating CSB or sending signal to process. In multithread applications, children can open VAS windows and can exit without closing them. But the parent can continue to send NX requests with these windows. To prevent pid reuse, reference will be taken on pid and tgid when the window is opened and release them during window close.
The current code is not releasing the tgid reference which can cause pid leak and this patch fixes the issue.
--- arch/powerpc/platforms/powernv/vas-window.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
arch/powerpc/platforms/powernv/vas-window.c +5 -4
@@ -1093,9 +1093,9 @@ struct vas_window *vas_tx_win_open(int v/* * Process closes window during exit. In the case of * multithread application, the child thread can open -* window and can exit without closing it. Expects parent -* thread to use and close the window. So do not need -* to take pid reference for parent thread. +* window and can exit without closing it. so takes tgid +* reference until window closed to make sure tgid is not +* reused. */ txwin->tgid =find_get_pid (task_tgid_vnr (current));/*
@@ -1339,8 +1339,9 @@ int vas_win_close(struct vas_window *win/* if send window, drop reference to matching receive window */ if (window->tx_win) {if (window->user_win) { -/* Drop references to pid and mm */ +/* Drop references to pid. tgid and mm */ put_pid (window->pid); +put_pid (window->tgid);if (window->mm) {mm_context_remove_vas_window (window->mm);mmdrop (window->mm);
Greg Kroah-Hartman
maintainerPATCH 149/215 drm/amdgpu: Update NV SIMD-per-CU to 2
In reply to Greg Kroah-HartmanFrom: Joseph Greathouse <[email protected]>
commit aa6158112645aae514982ad8d56df64428fcf203 upstream.
Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP). The NV enum headers incorrectly listed this as 4, which later meant we were incorrectly reporting the number of SIMDs in the HSA topology. This could cause problems down the line for user-space applications that want to launch a fixed amount of work to each SIMD.
--- drivers/gpu/drm/amd/include/navi10_enum.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/include/navi10_enum.h +1 -1
@@ -430,7 +430,7 @@ ARRAY_2D_DEPTH*/ typedef enum ENUM_NUM_SIMD_PER_CU { -NUM_SIMD_PER_CU =0x00000004 , +NUM_SIMD_PER_CU =0x00000002 , }ENUM_NUM_SIMD_PER_CU ;/*
Greg Kroah-Hartman
maintainerPATCH 150/215 drm/amdgpu: enable sdma0 tmz for Raven/Renoir(V2)
In reply to Greg Kroah-HartmanFrom: Aaron Liu <[email protected]>
commit e2329e74a615cc58b25c42b7aa1477a5e3f6a435 upstream.
Without driver loaded, SDMA0_UTCL1_PAGE.TMZ_ENABLE is set to 1 by default for all asic. On Raven/Renoir, the sdma goldsetting changes SDMA0_UTCL1_PAGE.TMZ_ENABLE to 0.
This patch restores SDMA0_UTCL1_PAGE.TMZ_ENABLE to 1.
--- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +2 -2
@@ -143,7 +143,7 @@ static const struct soc15_reg_golden golSOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_RLC0_RB_WPTR_POLL_CNTL,0xfffffff7 ,0x00403000 ),SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_RLC1_IB_CNTL,0x800f0111 ,0x00000100 ),SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_RLC1_RB_WPTR_POLL_CNTL,0xfffffff7 ,0x00403000 ), -SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_UTCL1_PAGE,0x000003ff ,0x000003c0 ), +SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_UTCL1_PAGE,0x000003ff ,0x000003e0 ), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_WATERMK, 0xfc000000, 0x00000000) };
@@ -269,7 +269,7 @@ static const struct soc15_reg_golden golSOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_POWER_CNTL,0x003fff07 ,0x40000051 ),SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_RLC0_RB_WPTR_POLL_CNTL,0xfffffff7 ,0x00403000 ),SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_RLC1_RB_WPTR_POLL_CNTL,0xfffffff7 ,0x00403000 ), -SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_UTCL1_PAGE,0x000003ff ,0x000003c0 ), +SOC15_REG_GOLDEN_VALUE (SDMA0 ,0 , mmSDMA0_UTCL1_PAGE,0x000003ff ,0x000003e0 ), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_WATERMK, 0xfc000000, 0x03fbe1fe) };
Greg Kroah-Hartman
maintainerPATCH 151/215 drm/radeon: Add the missed drm_gem_object_put() in radeon_user_framebuffer_create()
In reply to Greg Kroah-HartmanFrom: Jing Xiangfeng <[email protected]>
commit 9ba85914c36c8fed9bf3e8b69c0782908c1247b7 upstream.
radeon_user_framebuffer_create() misses to call drm_gem_object_put() in an error path. Add the missed function call to fix it.
--- drivers/gpu/drm/radeon/radeon_display.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/radeon/radeon_display.c +1 -0
@@ -1334,6 +1334,7 @@ radeon_user_framebuffer_create(struct dr/* Handle is imported dma-buf, so cannot be migrated to VRAM for scanout */ if (obj->import_attach) {DRM_DEBUG_KMS ("Cannot create framebuffer from imported dma_buf\n" ); +drm_gem_object_put (obj);return ERR_PTR (-EINVAL ); }
Greg Kroah-Hartman
maintainerPATCH 152/215 drm/radeon: Call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64
In reply to Greg Kroah-HartmanFrom: Tiezhu Yang <[email protected]>
commit c1bfd74bfef77bcefc88d12eaf8996c0dfd51331 upstream.
On the Loongson64 platform used with Radeon GPU, shutdown or reboot failed when console=tty is in the boot cmdline.
radeon_suspend_kms() puts the hw in the suspend state, especially set fb state as FBINFO_STATE_SUSPENDED:
if (fbcon) {
console_lock();
radeon_fbdev_set_suspend(rdev, 1);
console_unlock();
}Then avoid to do any more fb operations in the related functions:
if (p->state != FBINFO_STATE_RUNNING)
return;So call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64 to fix this issue, it looks like some kind of workaround like powerpc.
--- drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/radeon/radeon_drv.c +4 -4
@@ -416,13 +416,13 @@ radeon_pci_shutdown(struct pci_dev *pdevif (radeon_device_is_virtual ())radeon_pci_remove (pdev); -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC64 ) || defined(CONFIG_MACH_LOONGSON64 )/* * Some adapters need to be suspended before a * shutdown occurs in order to prevent an error -* during kexec. -* Make this power specific becauase it breaks -* some non-power boards. +* during kexec, shutdown or reboot. +* Make this power and Loongson specific because +* it breaks some other boards. */ radeon_suspend_kms (pci_get_drvdata (pdev), true, true, false);#endif
Greg Kroah-Hartman
maintainerPATCH 153/215 drm/vc4: txp: Properly set the possible_crtcs mask
In reply to Greg Kroah-HartmanFrom: Maxime Ripard <[email protected]>
commit bf6de8e61509f3c957d7f75f017b18d40a18a950 upstream.
The current code does a binary OR on the possible_crtcs variable of the TXP encoder, while we want to set it to that value instead.
--- drivers/gpu/drm/vc4/vc4_txp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_txp.c +1 -1
@@ -503,7 +503,7 @@ static int vc4_txp_bind(struct device *dreturn ret; encoder = &txp->connector.encoder; - encoder->possible_crtcs |=drm_crtc_mask (crtc); + encoder->possible_crtcs =drm_crtc_mask (crtc); ret =devm_request_irq (dev, irq, vc4_txp_interrupt,0 ,dev_name (dev), txp);
Greg Kroah-Hartman
maintainerPATCH 154/215 drm/vc4: crtc: Skip the TXP
In reply to Greg Kroah-HartmanFrom: Maxime Ripard <[email protected]>
commit 47a50743031ad4138050ae6d266ddd3dfe845ead upstream.
The vc4_set_crtc_possible_masks is meant to run over all the encoders and then set their possible_crtcs mask to their associated pixelvalve.
However, since the commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own"), the TXP has been turned to a CRTC and encoder of its own, and while it does indeed register an encoder, it no longer has an associated pixelvalve. The code will thus run over the TXP encoder and set a bogus possible_crtcs mask, overriding the one set in the TXP bind function.
In order to fix this, let's skip any virtual encoder.
--- drivers/gpu/drm/vc4/vc4_crtc.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/vc4/vc4_crtc.c +3 -0
@@ -1042,6 +1042,9 @@ static void vc4_set_crtc_possible_masks(struct vc4_encoder *vc4_encoder;int i; +if (encoder->encoder_type ==DRM_MODE_ENCODER_VIRTUAL ) +continue ; + vc4_encoder =to_vc4_encoder (encoder);for (i =0 ; i <ARRAY_SIZE (pv_data->encoder_types); i++) {if (vc4_encoder->type == encoder_types[i]) {
Greg Kroah-Hartman
maintainerPATCH 155/215 drm/vc4: hdmi: Prevent clock unbalance
In reply to Greg Kroah-HartmanFrom: Maxime Ripard <[email protected]>
commit 5b006000423667ef0f55721fc93e477b31f22d28 upstream.
Since we fixed the hooks to disable the encoder at boot, we now have an unbalanced clk_disable call at boot since we never enabled them in the first place.
Let's mimic the state of the hardware and enable the clocks at boot if the controller is enabled to get the use-count right.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/gpu/drm/vc4/vc4_hdmi.c +8 -0
@@ -1807,6 +1807,14 @@ static int vc4_hdmi_bind(struct device *if (vc4_hdmi->variant->reset) vc4_hdmi->variant->reset (vc4_hdmi); +if ((of_device_is_compatible (dev->of_node,"brcm,bcm2711-hdmi0" ) || +of_device_is_compatible (dev->of_node,"brcm,bcm2711-hdmi1" )) && +HDMI_READ (HDMI_VID_CTL ) &VC4_HD_VID_CTL_ENABLE ) { +clk_prepare_enable (vc4_hdmi->pixel_clock); +clk_prepare_enable (vc4_hdmi->hsm_clock); +clk_prepare_enable (vc4_hdmi->pixel_bvb_clock); + } +pm_runtime_enable (dev);drm_simple_encoder_init (drm, encoder,DRM_MODE_ENCODER_TMDS );
Greg Kroah-Hartman
maintainerPATCH 156/215 drm/dp: Handle zeroed port counts in drm_dp_read_downstream_info()
In reply to Greg Kroah-HartmanFrom: Lyude Paul <[email protected]>
commit 205bb69a90363541a634a662a599fddb95956524 upstream.
While the DP specification isn't entirely clear on if this should be allowed or not, some branch devices report having downstream ports present while also reporting a downstream port count of 0. So to avoid breaking those devices, we need to handle this in drm_dp_read_downstream_info().
So, to do this we assume there's no downstream port info when the downstream port count is 0.
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3416
--- drivers/gpu/drm/drm_dp_helper.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/gpu/drm/drm_dp_helper.c +7 -0
@@ -602,7 +602,14 @@ int drm_dp_read_downstream_info(struct d !(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT))return 0 ; +/* Some branches advertise having 0 downstream ports, despite also advertising they have a +* downstream port present. The DP spec isn't clear on if this is allowed or not, but since +* some branches do it we need to handle it regardless. +*/ len =drm_dp_downstream_port_count (dpcd); +if (!len) +return 0 ; +if (dpcd[DP_DOWNSTREAMPORT_PRESENT ] &DP_DETAILED_CAP_INFO_AVAILABLE ) len *=4 ;
Greg Kroah-Hartman
maintainerPATCH 157/215 drm/rockchip: dsi: remove extra component_del() call
In reply to Greg Kroah-HartmanFrom: Thomas Hebb <[email protected]>
commit b354498bbe65c917d521b3b56317ddc9ab217425 upstream.
commit cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support") added this devcnt field and call to component_del(). However, these both appear to be erroneous changes left over from an earlier version of the patch. In the version merged, nothing ever modifies devcnt, meaning component_del() runs unconditionally and in addition to the component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second call fails to delete anything and produces a warning in dmesg.
If we look at the previous version of the patch[1], however, we see that it had logic to calculate devcnt and call component_add() in certain situations. This was removed in v6, and the fact that the deletion code was not appears to have been an oversight.
[1] https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
--- drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c +0 -4
@@ -243,7 +243,6 @@ struct dw_mipi_dsi_rockchip {struct dw_mipi_dsi *dmd;const struct rockchip_dw_dsi_chip_data *cdata;struct dw_mipi_dsi_plat_data pdata; -int devcnt; };struct dphy_pll_parameter_map {
@@ -1141,9 +1140,6 @@ static int dw_mipi_dsi_rockchip_remove(s {struct dw_mipi_dsi_rockchip *dsi =platform_get_drvdata (pdev); -if (dsi->devcnt ==0 ) -component_del (dsi->dev, &dw_mipi_dsi_rockchip_ops); -dw_mipi_dsi_remove (dsi->dmd);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 158/215 drm/amd/display: fix incorrrect valid irq check
In reply to Greg Kroah-HartmanFrom: Guchun Chen <[email protected]>
commit e38ca7e422791a4d1c01e56dbf7f9982db0ed365 upstream.
valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER.
--- drivers/gpu/drm/amd/display/dc/irq_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/irq_types.h +1 -1
@@ -163,7 +163,7 @@ enum irq_type };#define DAL_VALID_IRQ_SRC_NUM (src) \ - ((src) <= DAL_IRQ_SOURCES_NUMBER && (src) > DC_IRQ_SOURCE_INVALID) + ((src) < DAL_IRQ_SOURCES_NUMBER && (src) > DC_IRQ_SOURCE_INVALID)/* Number of Page Flip IRQ Sources. */ #define DAL_PFLIP_IRQ_SRC_NUM \
Greg Kroah-Hartman
maintainerPATCH 159/215 pinctrl/amd: Add device HID for new AMD GPIO controller
In reply to Greg Kroah-HartmanFrom: Maximilian Luz <[email protected]>
commit 1ca46d3e43569186bd1decfb02a6b4c4ddb4304b upstream.
Add device HID AMDI0031 to the AMD GPIO controller driver match table. This controller can be found on Microsoft Surface Laptop 4 devices and seems similar enough that we can just copy the existing AMDI0030 entry.
--- drivers/pinctrl/pinctrl-amd.c | 1 + 1 file changed, 1 insertion(+)
drivers/pinctrl/pinctrl-amd.c +1 -0
@@ -952,6 +952,7 @@ static int amd_gpio_remove(struct platfostatic const struct acpi_device_id amd_gpio_acpi_match[] = { {"AMD0030" ,0 }, {"AMDI0030" ,0 }, + {"AMDI0031" ,0 }, { }, };MODULE_DEVICE_TABLE (acpi, amd_gpio_acpi_match);
Greg Kroah-Hartman
maintainerPATCH 160/215 drm/amd/display: Reject non-zero src_y and src_x for video planes
In reply to Greg Kroah-HartmanFrom: Harry Wentland <[email protected]>
commit c6c6a712199ab355ce333fa5764a59506bb107c1 upstream.
[Why]
This hasn't been well tested and leads to complete system hangs on DCN1 based systems, possibly others.
The system hang can be reproduced by gesturing the video on the YouTube Android app on ChromeOS into full screen.
[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.
v2:
- Add code comment describing the reason we're rejecting non-zero src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next
v3: removed trailing whitespace
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +17 -0
@@ -3702,6 +3702,23 @@ static int fill_dc_scaling_info(const st scaling_info->src_rect.y != 0))return -EINVAL ; +/* +* For reasons we don't (yet) fully understand a non-zero +* src_y coordinate into an NV12 buffer can cause a +* system hang. To avoid hangs (and maybe be overly cautious) +* let's reject both non-zero src_x and src_y. +* +* We currently know of only one use-case to reproduce a +* scenario with non-zero src_x and src_y for NV12, which +* is to gesture the YouTube Android app into full screen +* on ChromeOS. +*/ +if (state->fb && + state->fb->format->format ==DRM_FORMAT_NV12 && + (scaling_info->src_rect.x !=0 || + scaling_info->src_rect.y !=0 )) +return -EINVAL ; + scaling_info->src_rect.width = state->src_w >>16 ;if (scaling_info->src_rect.width ==0 )return -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 161/215 drm/tegra: Dont set allow_fb_modifiers explicitly
In reply to Greg Kroah-HartmanFrom: Daniel Vetter <[email protected]>
commit be4306ad928fcf736cbe2616b6dd19d91f1bc083 upstream.
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <[email protected]> Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport further than where Paul's patch got added.
--- drivers/gpu/drm/tegra/dc.c | 10 ++++++++-- drivers/gpu/drm/tegra/drm.c | 2 -- 2 files changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/tegra/dc.c +8 -2
@@ -947,6 +947,11 @@ static const struct drm_plane_helper_fun .atomic_disable = tegra_cursor_atomic_disable, }; +static const uint64_t linear_modifiers[] = { +DRM_FORMAT_MOD_LINEAR , +DRM_FORMAT_MOD_INVALID +}; +static struct drm_plane *tegra_dc_cursor_plane_create (struct drm_device *drm,struct tegra_dc *dc) {
@@ -975,7 +980,7 @@ static struct drm_plane *tegra_dc_cursor err =drm_universal_plane_init (drm, &plane->base, possible_crtcs, &tegra_plane_funcs, formats, - num_formats,NULL , + num_formats, linear_modifiers,DRM_PLANE_TYPE_CURSOR ,NULL );if (err <0 ) {kfree (plane);
@@ -1094,7 +1099,8 @@ static struct drm_plane *tegra_dc_overla err =drm_universal_plane_init (drm, &plane->base, possible_crtcs, &tegra_plane_funcs, formats, - num_formats,NULL , type,NULL ); + num_formats, linear_modifiers, + type,NULL );if (err <0 ) {kfree (plane);return ERR_PTR (err);
drivers/gpu/drm/tegra/drm.c +0 -2
@@ -1127,8 +1127,6 @@ static int host1x_drm_probe(struct host1 drm->mode_config.max_width =4096 ; drm->mode_config.max_height =4096 ; - drm->mode_config.allow_fb_modifiers = true; - drm->mode_config.normalize_zpos = true; drm->mode_config.funcs = &tegra_drm_mode_config_funcs;
Greg Kroah-Hartman
maintainerPATCH 162/215 drm/msm/mdp4: Fix modifier support enabling
In reply to Greg Kroah-HartmanFrom: Daniel Vetter <[email protected]>
commit 35cbb8c91e9cf310277d3dfb4d046df8edf2df33 upstream.
Setting the cap without the modifier list is very confusing to userspace. Fix that by listing the ones we support explicitly.
Stable backport so that userspace can rely on this working in a reasonable way, i.e. that the cap set implies IN_FORMATS is available.
--- drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 -- drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c | 8 +++++++- 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +0 -2
@@ -88,8 +88,6 @@ static int mdp4_hw_init(struct msm_kms *if (mdp4_kms->rev >1 )mdp4_write (mdp4_kms,REG_MDP4_RESET_STATUS ,1 ); - dev->mode_config.allow_fb_modifiers = true; - out:pm_runtime_put_sync (dev->dev);
drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c +7 -1
@@ -347,6 +347,12 @@ enum mdp4_pipe mdp4_plane_pipe(struct drreturn mdp4_plane->pipe; } +static const uint64_t supported_format_modifiers[] = { +DRM_FORMAT_MOD_SAMSUNG_64_32_TILE , +DRM_FORMAT_MOD_LINEAR , +DRM_FORMAT_MOD_INVALID +}; +/* initialize plane */ struct drm_plane *mdp4_plane_init (struct drm_device *dev,enum mdp4_pipe pipe_id,bool private_plane)
@@ -375,7 +381,7 @@ struct drm_plane *mdp4_plane_init(struct type = private_plane ?DRM_PLANE_TYPE_PRIMARY :DRM_PLANE_TYPE_OVERLAY ; ret =drm_universal_plane_init (dev, plane,0xff , &mdp4_plane_funcs, mdp4_plane->formats, mdp4_plane->nformats, -NULL , type,NULL ); + supported_format_modifiers, type,NULL );if (ret) goto fail;
Greg Kroah-Hartman
maintainerPATCH 163/215 drm/arm/malidp: Always list modifiers
In reply to Greg Kroah-HartmanFrom: Daniel Vetter <[email protected]>
commit 26c3e7fd5a3499e408915dadae5d5360790aae9a upstream.
Even when all we support is linear, make that explicit. Otherwise the uapi is rather confusing.
--- drivers/gpu/drm/arm/malidp_planes.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/arm/malidp_planes.c +7 -2
@@ -922,6 +922,11 @@ static const struct drm_plane_helper_fun .atomic_disable = malidp_de_plane_disable, }; +static const uint64_t linear_only_modifiers[] = { +DRM_FORMAT_MOD_LINEAR , +DRM_FORMAT_MOD_INVALID +}; +int malidp_de_planes_init (struct drm_device *drm) {struct malidp_drm *malidp = drm->dev_private;
@@ -985,8 +990,8 @@ int malidp_de_planes_init(struct drm_dev*/ ret =drm_universal_plane_init (drm, &plane->base, crtcs, &malidp_de_plane_funcs, formats, n, - (id ==DE_SMART ) ?NULL : modifiers, plane_type, -NULL ); + (id ==DE_SMART ) ? linear_only_modifiers : modifiers, + plane_type,NULL );if (ret <0 ) goto cleanup;
Greg Kroah-Hartman
maintainerPATCH 164/215 drm/nouveau: Dont set allow_fb_modifiers explicitly
In reply to Greg Kroah-HartmanFrom: Daniel Vetter <[email protected]>
commit cee93c028288b9af02919f3bd8593ba61d1e610d upstream.
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <[email protected]> Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here.
Note that this fixes an inconsistency: We've set the cap everywhere, but only nv50+ supports modifiers. Hence cc stable, but not further back then the patch from Paul.
--- drivers/gpu/drm/nouveau/nouveau_display.c | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_display.c +0 -1
@@ -700,7 +700,6 @@ nouveau_display_create(struct drm_device dev->mode_config.preferred_depth =24 ; dev->mode_config.prefer_shadow =1 ; - dev->mode_config.allow_fb_modifiers = true;if (drm->client.device.info.chipset <0x11 ) dev->mode_config.async_page_flip = false;
_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
Greg Kroah-Hartman
maintainerPATCH 165/215 drm/i915/display: Do not zero past infoframes.vsc
In reply to Greg Kroah-HartmanFrom: Kees Cook <[email protected]>
commit 07b72960d2b4a087ff2445e286159e69742069cc upstream.
intel_dp_vsc_sdp_unpack() was using a memset() size (36, struct dp_sdp) larger than the destination (24, struct drm_dp_vsc_sdp), clobbering fields in struct intel_crtc_state after infoframes.vsc. Use the actual target size for the memset().
--- drivers/gpu/drm/i915/display/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
@@ -5080,7 +5080,7 @@ static int intel_dp_vsc_sdp_unpack(strucif (size <sizeof (struct dp_sdp ))return -EINVAL ; -memset (vsc,0 , size); +memset (vsc,0 ,sizeof (*vsc));if (sdp->sdp_header.HB0 !=0 )return -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 166/215 mmc: sdhci-acpi: Disable write protect detection on Toshiba Encore 2 WT8-B
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
commit 94ee6782e045645abd9180ab9369b01293d862bd upstream.
On the Toshiba Encore 2 WT8-B the microSD slot always reports the card being write-protected even though microSD cards do not have a write-protect switch at all.
Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk entry to sdhci-acpi.c's DMI quirk table for this.
--- drivers/mmc/host/sdhci-acpi.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/mmc/host/sdhci-acpi.c +11 -0
@@ -788,6 +788,17 @@ static const struct dmi_system_id sdhci_ }, .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, }, + { + /* + * The Toshiba WT8-B's microSD slot always reports the card being + * write-protected. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TOSHIBA ENCORE 2 WT8-B"), + }, + .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT, + }, {} /* Terminating entry */ };
Greg Kroah-Hartman
maintainerPATCH 167/215 mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
In reply to Greg Kroah-HartmanFrom: Al Cooper <[email protected]>
commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream.
When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value().
This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
--- drivers/mmc/host/sdhci.c | 4 ++++ drivers/mmc/host/sdhci.h | 1 + 2 files changed, 5 insertions(+)
drivers/mmc/host/sdhci.c +4 -0
@@ -1813,6 +1813,10 @@ static u16 sdhci_get_preset_value(structu16 preset =0 ;switch (host->timing) { +case MMC_TIMING_MMC_HS : +case MMC_TIMING_SD_HS : + preset =sdhci_readw (host,SDHCI_PRESET_FOR_HIGH_SPEED ); +break ;case MMC_TIMING_UHS_SDR12 : preset =sdhci_readw (host,SDHCI_PRESET_FOR_SDR12 );break ;
drivers/mmc/host/sdhci.h +1 -0
@@ -253,6 +253,7 @@/* 60-FB reserved */ +#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64#define SDHCI_PRESET_FOR_SDR12 0x66#define SDHCI_PRESET_FOR_SDR25 0x68#define SDHCI_PRESET_FOR_SDR50 0x6A