mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to HOST_CONTROL2 register.
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/mmc/sdhci.c +3 -0
@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Signature · 1 line
2.17.1
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Hi,
Quoted 3 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.
I didn't find HS400 bit at HOST_CONTROL2 register. (I have checked SD Specific v4.20) If I missed something, let me know, plz.
In include/sdhci.h, it mentioned to "Non-standard".
Best Regards,
Jaehoon Chung
Quoted 22 lines
Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Hi Jaehoon,
Quoted 12 lines · Jaehoon Chung
Hi,
Quoted 3 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.I didn't find HS400 bit at
HOST_CONTROL2register. (I have checked SD Specific v4.20) If I missed something, let me know, plz.In
include/sdhci.h, it mentioned to "Non-standard".
Thank you for pointing this out.
Yes, this is not a part of SD specification and in the specification this field is marked as reserved. I have added this, as this bit mask has been defined in include/sdhci.h. Sorry about this. I'll post a respin taking this into a consideration.
Thanks,
Aswath
Quoted 26 lines
Best Regards,
Jaehoon ChungQuoted 22 lines
Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Hi Jaehoon,
Quoted 16 lines · Aswath Govindraju
Hi Jaehoon,
Quoted 12 lines · Jaehoon Chung
Hi,
Quoted 3 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.I didn't find HS400 bit at
HOST_CONTROL2register. (I have checked SD Specific v4.20) If I missed something, let me know, plz.In
include/sdhci.h, it mentioned to "Non-standard".
Quoted 7 lines
Thank you for pointing this out.
Yes, this is not a part of SD specification and in the specification this field is marked as reserved. I have added this, as this bit mask has been defined in
include/sdhci.h. Sorry about this. I'll post a respin taking this into a consideration.
On the other hand, the same has been accepted in kernel i.e. setting SDHCI_CTRL_HS400 bit in HOST_CONTROL2 register, drivers/mmc/host/sdhci.c in sdhci_set_uhs_signaling(). I think although this bit has not been mentioned in the specification, it seems it is used by many controllers for HS400 mode. So, as this is not specific to a controller can setting this, be allowed in the common sdhci_set_uhs_timing() function ?
Thanks,
Aswath
Quoted 30 lines
Thanks,
AswathQuoted 26 lines
Best Regards,
Jaehoon ChungQuoted 22 lines
Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Hi Aswath,
Quoted 27 lines · Aswath Govindraju
Hi Jaehoon,
Quoted 16 lines · Aswath Govindraju
Hi Jaehoon,
Quoted 12 lines · Jaehoon Chung
Hi,
Quoted 3 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.I didn't find HS400 bit at
HOST_CONTROL2register. (I have checked SD Specific v4.20) If I missed something, let me know, plz.In
include/sdhci.h, it mentioned to "Non-standard".Quoted 7 lines
Thank you for pointing this out.
Yes, this is not a part of SD specification and in the specification this field is marked as reserved. I have added this, as this bit mask has been defined in
include/sdhci.h. Sorry about this. I'll post a respin taking this into a consideration.
Quoted 6 lines
On the other hand, the same has been accepted in kernel i.e. setting
SDHCI_CTRL_HS400bit inHOST_CONTROL2register,drivers/mmc/host/sdhci.cinsdhci_set_uhs_signaling(). I think although this bit has not been mentioned in the specification, it seems it is used by many controllers for HS400 mode. So, as this is not specific to a controller can setting this, be allowed in the commonsdhci_set_uhs_timing()function ?
Frankly, i think that it can be used. Just I wondered that i missed something from Specification. :) Thanks for sharing information. I didn't check on kernel side.
Best Regards,
Jaehoon Chung
Quoted 36 lines
Thanks,
AswathQuoted 30 lines
Thanks,
AswathQuoted 26 lines
Best Regards,
Jaehoon ChungQuoted 22 lines
Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
In reply to Aswath GovindrajuQuoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
PATCH 1/1 mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>
Can you please pick this patch if there are no comments.
Thanks,
Aswath
Quoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Hi Peng,
Quoted 8 lines · Aswath Govindraju
Hi Peng,
Quoted 5 lines · Jaehoon Chung
Quoted 4 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
Thanks,
Aswath
Quoted 27 lines
Thanks,
AswathQuoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 11 lines · Aswath Govindraju
Hi Peng,
Quoted 8 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Reviewed-by Jaehoon Chung <[email protected]>Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
[1] - https://patchwork.ozlabs.org/project/uboot/list/?series=247000
[2] - https://patchwork.ozlabs.org/project/uboot/list/?series=245579
Thanks,
Aswath
Quoted 31 lines
Thanks,
AswathQuoted 27 lines
Thanks,
AswathQuoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Jaehoon Chung
Acked-byHi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)
I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.
Best Regards,
Jaehoon Chung
Quoted 40 lines
[1] - https://protect2.fireeye.com/v1/url?k=bf905767-e00b6fae-bf91dc28-0cc47a336fae-6a3fa5da3333a309&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D247000
[2] - https://protect2.fireeye.com/v1/url?k=c93699cd-96ada104-c9371282-0cc47a336fae-de6d85845da27eb0&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D245579Thanks,
AswathQuoted 31 lines
Thanks,
AswathQuoted 27 lines
Thanks,
AswathQuoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
+Tom
Quoted 32 lines · Jaehoon Chung
Hi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
Quoted 7 lines
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.Acked-by Jaehoon Chung <[email protected]>
Tom,
Is it okay if I pick this patch as per above suggestion?
Thanks and regards,
Lokesh
Quoted 45 lines
Best Regards,
Jaehoon ChungQuoted 40 lines
[1] - https://protect2.fireeye.com/v1/url?k=bf905767-e00b6fae-bf91dc28-0cc47a336fae-6a3fa5da3333a309&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D247000
[2] - https://protect2.fireeye.com/v1/url?k=c93699cd-96ada104-c9371282-0cc47a336fae-de6d85845da27eb0&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D245579Thanks,
AswathQuoted 31 lines
Thanks,
AswathQuoted 27 lines
Thanks,
AswathQuoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Hi Lokesh,
Quoted 38 lines · Lokesh Vutla
+Tom
Quoted 35 lines · Jaehoon Chung
Hi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)
Quoted 7 lines
Quoted 4 lines
I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.Acked-by Jaehoon Chung <[email protected]>Tom,
Is it okay if I pick this patch as per above suggestion?
Isn't it enough my Acked-by tag?
Best Regards,
Jaehoon Chung
Quoted 50 lines
Thanks and regards,
LokeshQuoted 45 lines
Best Regards,
Jaehoon ChungQuoted 40 lines
[1] - https://protect2.fireeye.com/v1/url?k=bf905767-e00b6fae-bf91dc28-0cc47a336fae-6a3fa5da3333a309&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D247000
[2] - https://protect2.fireeye.com/v1/url?k=c93699cd-96ada104-c9371282-0cc47a336fae-de6d85845da27eb0&q=1&e=ac3de2ef-41d1-4e60-952a-16e2b302cfdd&u=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D245579Thanks,
AswathQuoted 31 lines
Thanks,
AswathQuoted 27 lines
Thanks,
AswathQuoted 23 lines
Best Regards,
Jaehoon ChungQuoted 19 lines
--- drivers/mmc/sdhci.c | 3 +++ 1 file changed, 3 insertions(+)drivers/mmc/sdhci.c +3
-0@@ -507,6 +507,9 @@ void sdhci_set_uhs_timing(struct sdhci_host *host)case MMC_HS_200 : reg |=SDHCI_CTRL_UHS_SDR104 ;break ; +case MMC_HS_400 : + reg |=SDHCI_CTRL_HS400 ; +break ;default : reg |=SDHCI_CTRL_UHS_SDR12 ; }
Quoted 44 lines · Jaehoon Chung
Hi Lokesh,
Quoted 41 lines · Lokesh Vutla
+Tom
Quoted 38 lines · Jaehoon Chung
Hi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Acked-by Jaehoon Chung <[email protected]>Tom,
Is it okay if I pick this patch as per above suggestion?Isn't it enough my Acked-by tag?
Sure it is :). I just want to make sure Tom doesn't flag it in the PR.
Thanks and regards,
Lokesh
Quoted 47 lines · Lokesh Vutla
Quoted 44 lines · Jaehoon Chung
Hi Lokesh,
Quoted 41 lines · Lokesh Vutla
+Tom
Quoted 38 lines · Jaehoon Chung
Hi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Acked-by Jaehoon Chung <[email protected]>Tom,
Is it okay if I pick this patch as per above suggestion?Isn't it enough my Acked-by tag?
Sure it is :). I just want to make sure Tom doesn't flag it in the PR.
Thanks for explanation. :)
Best Regards,
Jaehoon Chung
Quoted 5 lines
Thanks and regards,
Lokesh
Quoted 38 lines · Lokesh Vutla
+Tom
Quoted 35 lines · Jaehoon Chung
Hi Aswath,
Quoted 20 lines · Aswath Govindraju
Hi Peng,
Quoted 17 lines · Aswath Govindraju
Hi Peng,
Quoted 14 lines · Aswath Govindraju
Hi Peng,
Quoted 10 lines · Jaehoon Chung
Quoted 6 lines · Aswath Govindraju
From: Faiz Abbas <[email protected]>
Enable HS400 speed mode by writing to
HOST_CONTROL2register.Signed-off-by Faiz Abbas <[email protected]>Signed-off-by Aswath Govindraju <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Can you please pick this patch if there are no comments.
May I know if this okay to be merged ?
A gentle reminder on this patch. This patch has other dependencies that and are pending merge[1][2].
I don't have the permission to merge on u-boot-mmc git.
I have the permission to merge on just u-boot-pmic..But I don't know whether it's the best way to apply this into my u-boot-pmic or not. :)
Quoted 7 lines
Quoted 4 lines
I had been already reviewed about this patch..
So if want to pick this, I think there is no problem about applied together with below patches.Acked-by Jaehoon Chung <[email protected]>Tom,
Is it okay if I pick this patch as per above suggestion?
Yes that's fine, thanks.
Signature · 1 line
Tom
Quoted 1 line · Aswath Govindraju
Enable HS400 speed mode by writing to
HOST_CONTROL2register.
Applied to https://source.denx.de/u-boot/custodians/u-boot-ti.git for-rc, thanks! [1/1] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/bda47bef7c
--
Thanks and Regards,
Lokesh