Skip to contentSkip to conversation

Begin enabling Xe_HP SDV and DG2 platforms

PATCH Superseded Matt Roper 8 participants 88 messages Jul 14, 2021 – Jul 21, 2021

Subsystems (4)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Matt Roper

author
#0 lore raw

v2 cover Begin enabling Xe_HP SDV and DG2 platforms

This series provides some of the initial enablement patches for two upcoming discrete GPUs:
* XeHP SDV: Xe_HP (version 12.50) graphics IP, no display IP
* DG2: Xe_HPG (version 12.55) graphics IP, Xe_LPD (version 13) display IP

Both platforms will need additional enablement patches beyond what's present in this series before they're truly usable, including various LMEM and GuC work that's already happening separately. The new features/functionality that these platforms bring (such as multi-tile support, dedicated compute engines, etc.) may be referenced in passing in some of these patches but will be fully enabled in future series.

v2:
- General rebase and incorporation of r-b's.
- Re-order intel_gt_info and intel_device_info structures to eliminate some unnecessary padding after the size change of intel_engine_mask_t. (Tvrtko)
- Use 'intel_step' mechanisms for revid->stepping mapping. (Jani)
- Drop the DSC patches for now; they need some rework. (Jani)

Cc Rodrigo Vivi <[email protected]>
Cc Lucas De Marchi <[email protected]>
Cc James Ausmus <[email protected]>

Akeem G Abodunrin (1):
drm/i915/dg2: Add new LRI reg offsets

Animesh Manna (1):
drm/i915/dg2: Update to bigjoiner path

Ankit Nautiyal (1):
drm/i915/dg2: Configure PCON in DP pre-enable path

Daniele Ceraolo Spurio (1):
drm/i915/xehp: handle new steering options

Gwan-gyeong Mun (1):
drm/i915/dg2: Update lane disable power state during PSR

John Harrison (4):
drm/i915/selftests: Allow for larger engine counts drm/i915/xehp: Extra media engines - Part 1 (engine definitions) drm/i915/xehp: Extra media engines - Part 2 (interrupts) drm/i915/xehp: Extra media engines - Part 3 (reset)

José Roberto de Souza (1):
drm/i915/dg2: Add DG2 to the PSR2 defeature list

Lucas De Marchi (4):
drm/i915: Add XE_HP initial definitions drm/i915/xehpsdv: add initial XeHP SDV definitions drm/i915/xehpsdv: Define MOCS table for XeHP SDV drm/i915/xehpsdv: factor out function to read RP_STATE_CAP

Matt Roper (29):
drm/i915/xehp: Xe_HP forcewake support
drm/i915/xehp: Define multicast register ranges drm/i915/xehp: Loop over all gslices for INSTDONE processing drm/i915/xehpsdv: Add maximum sseu limits drm/i915/xehpsdv: Define steering tables drm/i915/xehpsdv: Read correct RP_STATE_CAP register drm/i915/dg2: add DG2 platform info
drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV drm/i915/dg2: Add forcewake table
drm/i915/dg2: Update LNCF steering ranges drm/i915/dg2: Add SQIDI steering
drm/i915/dg2: Maintain backward-compatible nested batch behavior drm/i915/dg2: Report INSTDONE_GEOM values in error state drm/i915/dg2: Define MOCS table for DG2
drm/i915/dg2: Add fake PCH
drm/i915/dg2: Add cdclk table and reference clock drm/i915/dg2: Skip shared DPLL handling
drm/i915/dg2: Don't wait for AUX power well enable ACKs drm/i915/dg2: Setup display outputs
drm/i915/dg2: Add dbuf programming
drm/i915/dg2: Don't program BW_BUDDY registers drm/i915/dg2: Don't read DRAM info
drm/i915/dg2: DG2 has fixed memory bandwidth drm/i915/dg2: Add MPLLB programming for SNPS PHY drm/i915/dg2: Add MPLLB programming for HDMI drm/i915/dg2: Add vswing programming for SNPS phys drm/i915/dg2: Update modeset sequences
drm/i915/dg2: Classify DG2 PHY types
drm/i915/dg2: Wait for SNPS PHY calibration during display init

Matthew Auld (1):
drm/i915/xehp: Changes to ss/eu definitions

Paulo Zanoni (1):
drm/i915: Fork DG1 interrupt handler

Prathap Kumar Valsan (1):
drm/i915/xehp: New engine context offsets

Stuart Summers (2):
drm/i915/xehp: Handle new device context ID format drm/i915/xehpsdv: Add compute DSS type

Tvrtko Ursulin (1):
drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based

Venkata Sandeep Dhanalakota (1):
drm/i915/gen12: Use fuse info to enable SFC

 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/display/intel_bw.c       |  24 +-
 drivers/gpu/drm/i915/display/intel_cdclk.c    |  24 +-
 drivers/gpu/drm/i915/display/intel_ddi.c      | 161 +++-
 drivers/gpu/drm/i915/display/intel_display.c  |  94 +-
 drivers/gpu/drm/i915/display/intel_display.h  |   1 +
 .../drm/i915/display/intel_display_power.c    |  25 +
 .../drm/i915/display/intel_display_power.h    |  10 +
 .../drm/i915/display/intel_display_types.h    |  17 +-
 drivers/gpu/drm/i915/display/intel_dpll.c     |  12 +-
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |   5 +-
 drivers/gpu/drm/i915/display/intel_hdmi.c     |  11 +
 drivers/gpu/drm/i915/display/intel_psr.c      |  10 +-
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 862 ++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h |  35 +
 drivers/gpu/drm/i915/gt/debugfs_gt_pm.c       |   8 +-
 drivers/gpu/drm/i915/gt/gen8_engine_cs.c      |   7 +-
 drivers/gpu/drm/i915/gt/intel_engine_cs.c     | 144 ++-
 drivers/gpu/drm/i915/gt/intel_engine_types.h  |  29 +-
 .../drm/i915/gt/intel_execlists_submission.c  |  78 +-
 drivers/gpu/drm/i915/gt/intel_gt.c            |  66 +-
 drivers/gpu/drm/i915/gt/intel_gt.h            |   1 +
 drivers/gpu/drm/i915/gt/intel_gt_irq.c        |  13 +-
 drivers/gpu/drm/i915/gt/intel_gt_types.h      |  12 +-
 drivers/gpu/drm/i915/gt/intel_lrc.c           | 156 +++-
 drivers/gpu/drm/i915/gt/intel_lrc_reg.h       |   2 +
 drivers/gpu/drm/i915/gt/intel_mocs.c          |  66 +-
 drivers/gpu/drm/i915/gt/intel_region_lmem.c   |   1 +
 drivers/gpu/drm/i915/gt/intel_reset.c         |   6 +
 drivers/gpu/drm/i915/gt/intel_rps.c           |  19 +-
 drivers/gpu/drm/i915/gt/intel_rps.h           |   1 +
 drivers/gpu/drm/i915/gt/intel_sseu.c          | 116 ++-
 drivers/gpu/drm/i915/gt/intel_sseu.h          |  20 +-
 drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c  |   2 +-
 drivers/gpu/drm/i915/gt/intel_workarounds.c   | 175 +++-
 drivers/gpu/drm/i915/gt/selftest_execlists.c  |  10 +-
 .../gpu/drm/i915/gt/selftest_workarounds.c    |  32 +-
 drivers/gpu/drm/i915/i915_debugfs.c           |   8 +-
 drivers/gpu/drm/i915/i915_drv.h               |  36 +-
 drivers/gpu/drm/i915/i915_getparam.c          |   6 +-
 drivers/gpu/drm/i915/i915_gpu_error.c         |  36 +-
 drivers/gpu/drm/i915/i915_irq.c               | 141 ++-
 drivers/gpu/drm/i915/i915_pci.c               |  63 +-
 drivers/gpu/drm/i915/i915_perf.c              |  29 +-
 drivers/gpu/drm/i915/i915_reg.h               | 109 ++-
 drivers/gpu/drm/i915/intel_device_info.c      |   2 +
 drivers/gpu/drm/i915/intel_device_info.h      |  11 +-
 drivers/gpu/drm/i915/intel_dram.c             |   6 +-
 drivers/gpu/drm/i915/intel_pch.c              |   3 +
 drivers/gpu/drm/i915/intel_pch.h              |   2 +
 drivers/gpu/drm/i915/intel_pm.c               | 120 ++-
 drivers/gpu/drm/i915/intel_step.c             |  30 +-
 drivers/gpu/drm/i915/intel_step.h             |   1 +
 drivers/gpu/drm/i915/intel_uncore.c           | 367 ++++++--
 drivers/gpu/drm/i915/intel_uncore.h           |  14 +-
 drivers/gpu/drm/i915/selftests/intel_uncore.c |   2 +
 include/uapi/drm/i915_drm.h                   |   3 -
 57 files changed, 2959 insertions(+), 286 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.h
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH v2 1/50 drm/i915: Add XE_HP initial definitions

From: Lucas De Marchi <[email protected]>

Our _FEATURES macro went back to GEN7, extending each other, making it difficult to grasp what was really enabled/disabled. Take the opportunity of the GEN -> XE_HP name break and also break with the feature inheritance.

For XE_HP this basically goes from GEN12 back to GEN7 coalescing the features making sure the overrides remain, remove all the display-specific features and sort it.

Then also remove the definitions that would be overridden by DGFX_FEATURES and those that were 0 (since that is the default). Exception here is has_master_unit_irq: although it is a feature that started with DG1 and is true for all DGFX platforms, it's also true for XE_HP in general.

---
 drivers/gpu/drm/i915/i915_pci.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/gpu/drm/i915/i915_pci.c +24 -0
index 67696d752271..be5ee5e0e324 100644
@@ -995,6 +995,30 @@ static const struct intel_device_info adl_p_info = {
 };
 
 #undef GEN
+
+#define XE_HP_PAGE_SIZES \
+	.page_sizes = I915_GTT_PAGE_SIZE_4K | \
+		      I915_GTT_PAGE_SIZE_64K | \
+		      I915_GTT_PAGE_SIZE_2M
+
+#define XE_HP_FEATURES \
+	.graphics_ver = 12, \
+	.graphics_rel = 50, \
+	XE_HP_PAGE_SIZES, \
+	.dma_mask_size = 46, \
+	.has_64bit_reloc = 1, \
+	.has_global_mocs = 1, \
+	.has_gt_uc = 1, \
+	.has_llc = 1, \
+	.has_logical_ring_contexts = 1, \
+	.has_logical_ring_elsq = 1, \
+	.has_rc6 = 1, \
+	.has_reset_engine = 1, \
+	.has_rps = 1, \
+	.has_runtime_pm = 1, \
+	.ppgtt_size = 48, \
+	.ppgtt_type = INTEL_PPGTT_FULL
+
 #undef PLATFORM
 
 /*
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 1/50
#2 lore raw

Re: [Intel-gfx] [PATCH v2 01/50] drm/i915: Add XE_HP initial definitions

Quoted 11 lines · Matt Roper

From: Lucas De Marchi <[email protected]>

Our _FEATURES macro went back to GEN7, extending each other, making it difficult to grasp what was really enabled/disabled. Take the opportunity of the GEN -> XE_HP name break and also break with the feature inheritance.

For XE_HP this basically goes from GEN12 back to GEN7 coalescing the features making sure the overrides remain, remove all the display-specific features and sort it.

Quoted 5 lines

Then also remove the definitions that would be overridden by DGFX_FEATURES and those that were 0 (since that is the default). Exception here is has_master_unit_irq: although it is a feature that started with DG1 and is true for all DGFX platforms, it's also true for XE_HP in general.

Quoted 32 lines
---
 drivers/gpu/drm/i915/i915_pci.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/gpu/drm/i915/i915_pci.c +17 -0
index 67696d752271..be5ee5e0e324 100644
@@ -995,6 +995,30 @@ static const struct intel_device_info adl_p_info = {
 };
 
 #undef GEN
+
+#define XE_HP_PAGE_SIZES \
+	.page_sizes = I915_GTT_PAGE_SIZE_4K | \
+		      I915_GTT_PAGE_SIZE_64K | \
+		      I915_GTT_PAGE_SIZE_2M
+
+#define XE_HP_FEATURES \
+	.graphics_ver = 12, \
+	.graphics_rel = 50, \
+	XE_HP_PAGE_SIZES, \
+	.dma_mask_size = 46, \
+	.has_64bit_reloc = 1, \
+	.has_global_mocs = 1, \
+	.has_gt_uc = 1, \
+	.has_llc = 1, \
+	.has_logical_ring_contexts = 1, \
+	.has_logical_ring_elsq = 1, \

drivers/gpu/drm/i915/i915_pci.c static const struct intel_device_info adl_p_info = { · line 1024

Quoted 10 lines
drivers/gpu/drm/i915/i915_pci.c +7 -0
+	.has_rc6 = 1, \
+	.has_reset_engine = 1, \
+	.has_rps = 1, \
+	.has_runtime_pm = 1, \
+	.ppgtt_size = 48, \
+	.ppgtt_type = INTEL_PPGTT_FULL
+
 #undef PLATFORM
 
 /*

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#3 lore raw

PATCH v2 2/50 drm/i915: Fork DG1 interrupt handler

In reply to Matt Roper

From: Paulo Zanoni <[email protected]>

The current interrupt handler is getting increasingly complicated and Xe_HP changes will bring even more complexity. Let's split off a new interrupt handler starting with DG1 (i.e., when the master tile interrupt register was added to the design) and use that as the basis for the new Xe_HP changes.

Now that we track the hardware IP's release number as well as the version number, we can also properly define DG1 has version "12.10" and replace the has_master_unit_irq feature flag with an IP version test.

Bspec: 50875

---
 drivers/gpu/drm/i915/i915_drv.h          |   2 -
 drivers/gpu/drm/i915/i915_irq.c          | 139 +++++++++++++++--------
 drivers/gpu/drm/i915/i915_pci.c          |   2 +-
 drivers/gpu/drm/i915/i915_reg.h          |   4 +-
 drivers/gpu/drm/i915/intel_device_info.h |   1 -
 5 files changed, 95 insertions(+), 53 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +0 -2
index c4747f4407ef..eb7030e5a25b 100644
@@ -1648,8 +1648,6 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define HAS_LOGICAL_RING_ELSQ(dev_priv) \
 		(INTEL_INFO(dev_priv)->has_logical_ring_elsq)
 
-#define HAS_MASTER_UNIT_IRQ(dev_priv) (INTEL_INFO(dev_priv)->has_master_unit_irq)
-
 #define HAS_EXECLISTS(dev_priv) HAS_LOGICAL_RING_CONTEXTS(dev_priv)
 
 #define INTEL_PPGTT(dev_priv) (INTEL_INFO(dev_priv)->ppgtt_type)
drivers/gpu/drm/i915/i915_irq.c +92 -47

216 lines not on this page · raw message

drivers/gpu/drm/i915/i915_pci.c +1 -1
index be5ee5e0e324..060abebdf4a4 100644
@@ -907,7 +907,6 @@ static const struct intel_device_info rkl_info = {
 
 #define DGFX_FEATURES \
 	.memory_regions = REGION_SMEM | REGION_LMEM | REGION_STOLEN_LMEM, \
-	.has_master_unit_irq = 1, \
 	.has_llc = 0, \
 	.has_snoop = 1, \
 	.is_dgfx = 1
@@ -915,6 +914,7 @@ static const struct intel_device_info rkl_info = {
 static const struct intel_device_info dg1_info __maybe_unused = {
 	GEN12_FEATURES,
 	DGFX_FEATURES,
+	.graphics_rel = 10,
 	PLATFORM(INTEL_DG1),
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
 	.require_force_probe = 1,
drivers/gpu/drm/i915/i915_reg.h +2 -2
index 943fe485c662..2274e9c01d61 100644
@@ -7985,9 +7985,9 @@ enum {
 #define  GEN11_GT_DW1_IRQ		(1 << 1)
 #define  GEN11_GT_DW0_IRQ		(1 << 0)
 
-#define DG1_MSTR_UNIT_INTR		_MMIO(0x190008)
+#define DG1_MSTR_TILE_INTR		_MMIO(0x190008)
 #define   DG1_MSTR_IRQ			REG_BIT(31)
-#define   DG1_MSTR_UNIT(u)		REG_BIT(u)
+#define   DG1_MSTR_TILE(t)		REG_BIT(t)
 
 #define GEN11_DISPLAY_INT_CTL		_MMIO(0x44200)
 #define  GEN11_DISPLAY_IRQ_ENABLE	(1 << 31)
drivers/gpu/drm/i915/intel_device_info.h +0 -1
index bd83004c78b6..ba7483acc3f7 100644
@@ -127,7 +127,6 @@ enum intel_ppgtt_type {
 	func(has_llc); \
 	func(has_logical_ring_contexts); \
 	func(has_logical_ring_elsq); \
-	func(has_master_unit_irq); \
 	func(has_pooled_eu); \
 	func(has_rc6); \
 	func(has_rc6p); \
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 2/50
#4 lore raw

Re: [Intel-gfx] [PATCH v2 02/50] drm/i915: Fork DG1 interrupt handler

Quoted 12 lines · Matt Roper

From: Paulo Zanoni <[email protected]>

The current interrupt handler is getting increasingly complicated and Xe_HP changes will bring even more complexity. Let's split off a new interrupt handler starting with DG1 (i.e., when the master tile interrupt register was added to the design) and use that as the basis for the new Xe_HP changes.

Now that we track the hardware IP's release number as well as the version number, we can also properly define DG1 has version "12.10" and replace the has_master_unit_irq feature flag with an IP version test.

Quoted 7 lines

Bspec: 50875

Quoted 305 lines
---
 drivers/gpu/drm/i915/i915_drv.h          |   2 -
 drivers/gpu/drm/i915/i915_irq.c          | 139 +++++++++++++++--------
 drivers/gpu/drm/i915/i915_pci.c          |   2 +-
 drivers/gpu/drm/i915/i915_reg.h          |   4 +-
 drivers/gpu/drm/i915/intel_device_info.h |   1 -
 5 files changed, 95 insertions(+), 53 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +0 -2
index c4747f4407ef..eb7030e5a25b 100644
@@ -1648,8 +1648,6 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define HAS_LOGICAL_RING_ELSQ(dev_priv) \
 		(INTEL_INFO(dev_priv)->has_logical_ring_elsq)
 
-#define HAS_MASTER_UNIT_IRQ(dev_priv) (INTEL_INFO(dev_priv)->has_master_unit_irq)
-
 #define HAS_EXECLISTS(dev_priv) HAS_LOGICAL_RING_CONTEXTS(dev_priv)
 
 #define INTEL_PPGTT(dev_priv) (INTEL_INFO(dev_priv)->ppgtt_type)
drivers/gpu/drm/i915/i915_irq.c +92 -47
index 1d4c683c9de9..61dceb2a17c1 100644
@@ -2698,11 +2698,9 @@ gen11_display_irq_handler(struct drm_i915_private *i915)
 	enable_rpm_wakeref_asserts(&i915->runtime_pm);
 }
 
-static __always_inline irqreturn_t
-__gen11_irq_handler(struct drm_i915_private * const i915,
-		    u32 (*intr_disable)(void __iomem * const regs),
-		    void (*intr_enable)(void __iomem * const regs))
+static irqreturn_t gen11_irq_handler(int irq, void *arg)
 {
+	struct drm_i915_private *i915 = arg;
 	void __iomem * const regs = i915->uncore.regs;
 	struct intel_gt *gt = &i915->gt;
 	u32 master_ctl;
@@ -2711,9 +2709,9 @@ __gen11_irq_handler(struct drm_i915_private * const i915,
 	if (!intel_irqs_enabled(i915))
 		return IRQ_NONE;
 
-	master_ctl = intr_disable(regs);
+	master_ctl = gen11_master_intr_disable(regs);
 	if (!master_ctl) {
-		intr_enable(regs);
+		gen11_master_intr_enable(regs);
 		return IRQ_NONE;
 	}
 
@@ -2726,7 +2724,7 @@ __gen11_irq_handler(struct drm_i915_private * const i915,
 
 	gu_misc_iir = gen11_gu_misc_irq_ack(gt, master_ctl);
 
-	intr_enable(regs);
+	gen11_master_intr_enable(regs);
 
 	gen11_gu_misc_irq_handler(gt, gu_misc_iir);
 
@@ -2735,51 +2733,69 @@ __gen11_irq_handler(struct drm_i915_private * const i915,
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t gen11_irq_handler(int irq, void *arg)
-{
-	return __gen11_irq_handler(arg,
-				   gen11_master_intr_disable,
-				   gen11_master_intr_enable);
-}
-
-static u32 dg1_master_intr_disable_and_ack(void __iomem * const regs)
+static inline u32 dg1_master_intr_disable(void __iomem * const regs)
 {
 	u32 val;
 
 	/* First disable interrupts */
-	raw_reg_write(regs, DG1_MSTR_UNIT_INTR, 0);
+	raw_reg_write(regs, DG1_MSTR_TILE_INTR, 0);
 
 	/* Get the indication levels and ack the master unit */
-	val = raw_reg_read(regs, DG1_MSTR_UNIT_INTR);
+	val = raw_reg_read(regs, DG1_MSTR_TILE_INTR);
 	if (unlikely(!val))
 		return 0;
 
-	raw_reg_write(regs, DG1_MSTR_UNIT_INTR, val);
-
-	/*
-	 * Now with master disabled, get a sample of level indications
-	 * for this interrupt and ack them right away - we keep GEN11_MASTER_IRQ
-	 * out as this bit doesn't exist anymore for DG1
-	 */
-	val = raw_reg_read(regs, GEN11_GFX_MSTR_IRQ) & ~GEN11_MASTER_IRQ;
-	if (unlikely(!val))
-		return 0;
-
-	raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, val);
+	raw_reg_write(regs, DG1_MSTR_TILE_INTR, val);
 
 	return val;
 }
 
 static inline void dg1_master_intr_enable(void __iomem * const regs)
 {
-	raw_reg_write(regs, DG1_MSTR_UNIT_INTR, DG1_MSTR_IRQ);
+	raw_reg_write(regs, DG1_MSTR_TILE_INTR, DG1_MSTR_IRQ);
 }
 
 static irqreturn_t dg1_irq_handler(int irq, void *arg)
 {
-	return __gen11_irq_handler(arg,
-				   dg1_master_intr_disable_and_ack,
-				   dg1_master_intr_enable);
+	struct drm_i915_private * const i915 = arg;
+	struct intel_gt *gt = &i915->gt;
+	void __iomem * const regs = i915->uncore.regs;
+	u32 master_tile_ctl, master_ctl;
+	u32 gu_misc_iir;
+
+	if (!intel_irqs_enabled(i915))
+		return IRQ_NONE;
+
+	master_tile_ctl = dg1_master_intr_disable(regs);
+	if (!master_tile_ctl) {
+		dg1_master_intr_enable(regs);
+		return IRQ_NONE;
+	}
+
+	/* FIXME: we only support tile 0 for now. */
+	if (master_tile_ctl & DG1_MSTR_TILE(0)) {
+		master_ctl = raw_reg_read(regs, GEN11_GFX_MSTR_IRQ);
+		raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, master_ctl);
+	} else {
+		DRM_ERROR("Tile not supported: 0x%08x\n", master_tile_ctl);
+		dg1_master_intr_enable(regs);
+		return IRQ_NONE;
+	}
+
+	gen11_gt_irq_handler(gt, master_ctl);
+
+	if (master_ctl & GEN11_DISPLAY_IRQ)
+		gen11_display_irq_handler(i915);
+
+	gu_misc_iir = gen11_gu_misc_irq_ack(gt, master_ctl);
+
+	dg1_master_intr_enable(regs);
+
+	gen11_gu_misc_irq_handler(gt, gu_misc_iir);
+
+	pmu_irq_stats(i915, IRQ_HANDLED);
+
+	return IRQ_HANDLED;
 }
 
 /* Called from drm generic code, passed 'crtc' which
@@ -3167,10 +3183,20 @@ static void gen11_irq_reset(struct drm_i915_private *dev_priv)
 {
 	struct intel_uncore *uncore = &dev_priv->uncore;
 
-	if (HAS_MASTER_UNIT_IRQ(dev_priv))
-		dg1_master_intr_disable_and_ack(dev_priv->uncore.regs);
-	else
-		gen11_master_intr_disable(dev_priv->uncore.regs);
+	gen11_master_intr_disable(dev_priv->uncore.regs);
+
+	gen11_gt_irq_reset(&dev_priv->gt);
+	gen11_display_irq_reset(dev_priv);
+
+	GEN3_IRQ_RESET(uncore, GEN11_GU_MISC_);
+	GEN3_IRQ_RESET(uncore, GEN8_PCU_);
+}
+
+static void dg1_irq_reset(struct drm_i915_private *dev_priv)
+{
+	struct intel_uncore *uncore = &dev_priv->uncore;
+
+	dg1_master_intr_disable(dev_priv->uncore.regs);
 
 	gen11_gt_irq_reset(&dev_priv->gt);
 	gen11_display_irq_reset(dev_priv);
@@ -3862,13 +3888,28 @@ static void gen11_irq_postinstall(struct drm_i915_private *dev_priv)
 
 	GEN3_IRQ_INIT(uncore, GEN11_GU_MISC_, ~gu_misc_masked, gu_misc_masked);
 
-	if (HAS_MASTER_UNIT_IRQ(dev_priv)) {
-		dg1_master_intr_enable(uncore->regs);
-		intel_uncore_posting_read(&dev_priv->uncore, DG1_MSTR_UNIT_INTR);
-	} else {
-		gen11_master_intr_enable(uncore->regs);
-		intel_uncore_posting_read(&dev_priv->uncore, GEN11_GFX_MSTR_IRQ);
+	gen11_master_intr_enable(uncore->regs);
+	intel_uncore_posting_read(&dev_priv->uncore, GEN11_GFX_MSTR_IRQ);
+}
+
+static void dg1_irq_postinstall(struct drm_i915_private *dev_priv)
+{
+	struct intel_uncore *uncore = &dev_priv->uncore;
+	u32 gu_misc_masked = GEN11_GU_MISC_GSE;
+
+	gen11_gt_irq_postinstall(&dev_priv->gt);
+
+	GEN3_IRQ_INIT(uncore, GEN11_GU_MISC_, ~gu_misc_masked, gu_misc_masked);
+
+	if (HAS_DISPLAY(dev_priv)) {
+		icp_irq_postinstall(dev_priv);
+		gen8_de_irq_postinstall(dev_priv);
+		intel_uncore_write(&dev_priv->uncore, GEN11_DISPLAY_INT_CTL,
+				   GEN11_DISPLAY_IRQ_ENABLE);
 	}
+
+	dg1_master_intr_enable(dev_priv->uncore.regs);
+	intel_uncore_posting_read(&dev_priv->uncore, DG1_MSTR_TILE_INTR);
 }
 
 static void cherryview_irq_postinstall(struct drm_i915_private *dev_priv)
@@ -4407,9 +4448,9 @@ static irq_handler_t intel_irq_handler(struct drm_i915_private *dev_priv)
 		else
 			return i8xx_irq_handler;
 	} else {
-		if (HAS_MASTER_UNIT_IRQ(dev_priv))
+		if (GRAPHICS_VER_FULL(dev_priv) >= IP_VER(12, 10))
 			return dg1_irq_handler;
-		if (GRAPHICS_VER(dev_priv) >= 11)
+		else if (GRAPHICS_VER(dev_priv) >= 11)
 			return gen11_irq_handler;
 		else if (GRAPHICS_VER(dev_priv) >= 8)
 			return gen8_irq_handler;
@@ -4432,7 +4473,9 @@ static void intel_irq_reset(struct drm_i915_private *dev_priv)
 		else
 			i8xx_irq_reset(dev_priv);
 	} else {
-		if (GRAPHICS_VER(dev_priv) >= 11)
+		if (GRAPHICS_VER_FULL(dev_priv) >= IP_VER(12, 10))
+			dg1_irq_reset(dev_priv);
+		else if (GRAPHICS_VER(dev_priv) >= 11)
 			gen11_irq_reset(dev_priv);
 		else if (GRAPHICS_VER(dev_priv) >= 8)
 			gen8_irq_reset(dev_priv);
@@ -4455,7 +4498,9 @@ static void intel_irq_postinstall(struct drm_i915_private *dev_priv)
 		else
 			i8xx_irq_postinstall(dev_priv);
 	} else {
-		if (GRAPHICS_VER(dev_priv) >= 11)
+		if (GRAPHICS_VER_FULL(dev_priv) >= IP_VER(12, 10))
+			dg1_irq_postinstall(dev_priv);
+		else if (GRAPHICS_VER(dev_priv) >= 11)
 			gen11_irq_postinstall(dev_priv);
 		else if (GRAPHICS_VER(dev_priv) >= 8)
 			gen8_irq_postinstall(dev_priv);
drivers/gpu/drm/i915/i915_pci.c +1 -1
index be5ee5e0e324..060abebdf4a4 100644
@@ -907,7 +907,6 @@ static const struct intel_device_info rkl_info = {
 
 #define DGFX_FEATURES \
 	.memory_regions = REGION_SMEM | REGION_LMEM | REGION_STOLEN_LMEM, \
-	.has_master_unit_irq = 1, \
 	.has_llc = 0, \
 	.has_snoop = 1, \
 	.is_dgfx = 1
@@ -915,6 +914,7 @@ static const struct intel_device_info rkl_info = {
 static const struct intel_device_info dg1_info __maybe_unused = {
 	GEN12_FEATURES,
 	DGFX_FEATURES,
+	.graphics_rel = 10,
 	PLATFORM(INTEL_DG1),
 	.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
 	.require_force_probe = 1,
drivers/gpu/drm/i915/i915_reg.h +2 -2
index 943fe485c662..2274e9c01d61 100644
@@ -7985,9 +7985,9 @@ enum {
 #define  GEN11_GT_DW1_IRQ		(1 << 1)
 #define  GEN11_GT_DW0_IRQ		(1 << 0)
 
-#define DG1_MSTR_UNIT_INTR		_MMIO(0x190008)
+#define DG1_MSTR_TILE_INTR		_MMIO(0x190008)
 #define   DG1_MSTR_IRQ			REG_BIT(31)
-#define   DG1_MSTR_UNIT(u)		REG_BIT(u)
+#define   DG1_MSTR_TILE(t)		REG_BIT(t)
 
 #define GEN11_DISPLAY_INT_CTL		_MMIO(0x44200)
 #define  GEN11_DISPLAY_IRQ_ENABLE	(1 << 31)
drivers/gpu/drm/i915/intel_device_info.h +0 -1
index bd83004c78b6..ba7483acc3f7 100644
@@ -127,7 +127,6 @@ enum intel_ppgtt_type {
 	func(has_llc); \
 	func(has_logical_ring_contexts); \
 	func(has_logical_ring_elsq); \
-	func(has_master_unit_irq); \
 	func(has_pooled_eu); \
 	func(has_rc6); \
 	func(has_rc6p); \
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#5 lore raw

PATCH v2 3/50 drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based

In reply to Matt Roper

From: Tvrtko Ursulin <[email protected]>

On Xe_HP the fusing register is renamed and changed to have the "enable" semantics, but otherwise remains compatible (mmio address, bitmask ranges) with older platforms.

To simplify things we do not add a new register definition but just stop inverting the fusing masks before processing them.

Bspec: 52615

---
 drivers/gpu/drm/i915/gt/intel_engine_cs.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +8 -1
index d561573ed98c..5cfeb91d1b7b 100644
@@ -468,7 +468,14 @@ static intel_engine_mask_t init_engine_mask(struct intel_gt *gt)
 	if (GRAPHICS_VER(i915) < 11)
 		return info->engine_mask;
 
-	media_fuse = ~intel_uncore_read(uncore, GEN11_GT_VEBOX_VDBOX_DISABLE);
+	/*
+	 * On newer platforms the fusing register is called 'enable' and has
+	 * enable semantics, while on older platforms it is called 'disable'
+	 * and bits have disable semantices.
+	 */
+	media_fuse = intel_uncore_read(uncore, GEN11_GT_VEBOX_VDBOX_DISABLE);
+	if (GRAPHICS_VER_FULL(i915) < IP_VER(12, 50))
+		media_fuse = ~media_fuse;
 
 	vdbox_mask = media_fuse & GEN11_GT_VDBOX_DISABLE_MASK;
 	vebox_mask = (media_fuse & GEN11_GT_VEBOX_DISABLE_MASK) >>
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 3/50
#6 lore raw

Re: [Intel-gfx] [PATCH v2 03/50] drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based

Quoted 6 lines · Matt Roper

From: Tvrtko Ursulin <[email protected]>

On Xe_HP the fusing register is renamed and changed to have the "enable" semantics, but otherwise remains compatible (mmio address, bitmask ranges) with older platforms.

Quoted 8 lines

To simplify things we do not add a new register definition but just stop inverting the fusing masks before processing them.

Bspec: 52615

Quoted 31 lines
---
 drivers/gpu/drm/i915/gt/intel_engine_cs.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +8 -1
index d561573ed98c..5cfeb91d1b7b 100644
@@ -468,7 +468,14 @@ static intel_engine_mask_t init_engine_mask(struct intel_gt *gt)
 	if (GRAPHICS_VER(i915) < 11)
 		return info->engine_mask;
 
-	media_fuse = ~intel_uncore_read(uncore, GEN11_GT_VEBOX_VDBOX_DISABLE);
+	/*
+	 * On newer platforms the fusing register is called 'enable' and has
+	 * enable semantics, while on older platforms it is called 'disable'
+	 * and bits have disable semantices.
+	 */
+	media_fuse = intel_uncore_read(uncore, GEN11_GT_VEBOX_VDBOX_DISABLE);
+	if (GRAPHICS_VER_FULL(i915) < IP_VER(12, 50))
+		media_fuse = ~media_fuse;
 
 	vdbox_mask = media_fuse & GEN11_GT_VDBOX_DISABLE_MASK;
 	vebox_mask = (media_fuse & GEN11_GT_VEBOX_DISABLE_MASK) >>
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#7 lore raw

PATCH v2 4/50 drm/i915/gen12: Use fuse info to enable SFC

In reply to Matt Roper

From: Venkata Sandeep Dhanalakota <[email protected]>

In Gen12 there are various fuse combinations and in each configuration vdbox engine may be connected to SFC depending on which engines are available, so we need to set the SFC capability based on fuse value from the hardware. Even numbered physical instance always have SFC, odd numbered physical instances have SFC only if previous even instance is fused off.

v2:
- Minor style & typo fixes (Tvrtko)
- Drop an unwanted 'inline' (Tvrtko)

Bspec: 48028

---
 drivers/gpu/drm/i915/gt/intel_engine_cs.c | 30 ++++++++++++++++++-----
 1 file changed, 24 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +24 -6
index 5cfeb91d1b7b..3f8013612a08 100644
@@ -442,6 +442,28 @@ void intel_engines_free(struct intel_gt *gt)
 	}
 }
 
+static
+bool gen11_vdbox_has_sfc(struct drm_i915_private *i915,
+			 unsigned int physical_vdbox,
+			 unsigned int logical_vdbox, u16 vdbox_mask)
+{
+	/*
+	 * In Gen11, only even numbered logical VDBOXes are hooked
+	 * up to an SFC (Scaler & Format Converter) unit.
+	 * In Gen12, Even numbered physical instance always are connected
+	 * to an SFC. Odd numbered physical instances have SFC only if
+	 * previous even instance is fused off.
+	 */
+	if (GRAPHICS_VER(i915) == 12)
+		return (physical_vdbox % 2 == 0) ||
+			!(BIT(physical_vdbox - 1) & vdbox_mask);
+	else if (GRAPHICS_VER(i915) == 11)
+		return logical_vdbox % 2 == 0;
+
+	MISSING_CASE(GRAPHICS_VER(i915));
+	return false;
+}
+
 /*
  * Determine which engines are fused off in our particular hardware.
  * Note that we have a catch-22 situation where we need to be able to access
@@ -493,13 +515,9 @@ static intel_engine_mask_t init_engine_mask(struct intel_gt *gt)
 			continue;
 		}
 
-		/*
-		 * In Gen11, only even numbered logical VDBOXes are
-		 * hooked up to an SFC (Scaler & Format Converter) unit.
-		 * In TGL each VDBOX has access to an SFC.
-		 */
-		if (GRAPHICS_VER(i915) >= 12 || logical_vdbox++ % 2 == 0)
+		if (gen11_vdbox_has_sfc(i915, i, logical_vdbox, vdbox_mask))
 			gt->info.vdbox_sfc_access |= BIT(i);
+		logical_vdbox++;
 	}
 	drm_dbg(&i915->drm, "vdbox enable: %04x, instances: %04lx\n",
 		vdbox_mask, VDBOX_MASK(gt));
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#8 lore raw

PATCH v2 5/50 drm/i915/selftests: Allow for larger engine counts

In reply to Matt Roper

From: John Harrison <[email protected]>

Increasing the engine count causes a couple of local array variables to exceed the kernel stack limit. So make them dynamic allocations instead.

---
 drivers/gpu/drm/i915/gt/selftest_execlists.c  | 10 ++++--
 .../gpu/drm/i915/gt/selftest_workarounds.c    | 32 ++++++++++++-------
 2 files changed, 29 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/gt/selftest_execlists.c +8 -2
index 73ddc6e14730..22a124b134b6 100644
@@ -3561,12 +3561,16 @@ static int smoke_crescendo(struct preempt_smoke *smoke, unsigned int flags)
 #define BATCH BIT(0)
 {
 	struct task_struct *tsk[I915_NUM_ENGINES] = {};
-	struct preempt_smoke arg[I915_NUM_ENGINES];
+	struct preempt_smoke *arg;
 	struct intel_engine_cs *engine;
 	enum intel_engine_id id;
 	unsigned long count;
 	int err = 0;
 
+	arg = kmalloc_array(I915_NUM_ENGINES, sizeof(*arg), GFP_KERNEL);
+	if (!arg)
+		return -ENOMEM;
+
 	for_each_engine(engine, smoke->gt, id) {
 		arg[id] = *smoke;
 		arg[id].engine = engine;
@@ -3574,7 +3578,7 @@ static int smoke_crescendo(struct preempt_smoke *smoke, unsigned int flags)
 			arg[id].batch = NULL;
 		arg[id].count = 0;
 
-		tsk[id] = kthread_run(smoke_crescendo_thread, &arg,
+		tsk[id] = kthread_run(smoke_crescendo_thread, arg,
 				      "igt/smoke:%d", id);
 		if (IS_ERR(tsk[id])) {
 			err = PTR_ERR(tsk[id]);
@@ -3603,6 +3607,8 @@ static int smoke_crescendo(struct preempt_smoke *smoke, unsigned int flags)
 
 	pr_info("Submitted %lu crescendo:%x requests across %d engines and %d contexts\n",
 		count, flags, smoke->gt->info.num_engines, smoke->ncontext);
+
+	kfree(arg);
 	return 0;
 }
 
drivers/gpu/drm/i915/gt/selftest_workarounds.c +21 -11
index 7ebc4edb8ecf..7a38ce40feb2 100644
@@ -1175,31 +1175,36 @@ live_gpu_reset_workarounds(void *arg)
 {
 	struct intel_gt *gt = arg;
 	intel_wakeref_t wakeref;
-	struct wa_lists lists;
+	struct wa_lists *lists;
 	bool ok;
 
 	if (!intel_has_gpu_reset(gt))
 		return 0;
 
+	lists = kzalloc(sizeof(*lists), GFP_KERNEL);
+	if (!lists)
+		return -ENOMEM;
+
 	pr_info("Verifying after GPU reset...\n");
 
 	igt_global_reset_lock(gt);
 	wakeref = intel_runtime_pm_get(gt->uncore->rpm);
 
-	reference_lists_init(gt, &lists);
+	reference_lists_init(gt, lists);
 
-	ok = verify_wa_lists(gt, &lists, "before reset");
+	ok = verify_wa_lists(gt, lists, "before reset");
 	if (!ok)
 		goto out;
 
 	intel_gt_reset(gt, ALL_ENGINES, "live_workarounds");
 
-	ok = verify_wa_lists(gt, &lists, "after reset");
+	ok = verify_wa_lists(gt, lists, "after reset");
 
 out:
-	reference_lists_fini(gt, &lists);
+	reference_lists_fini(gt, lists);
 	intel_runtime_pm_put(gt->uncore->rpm, wakeref);
 	igt_global_reset_unlock(gt);
+	kfree(lists);
 
 	return ok ? 0 : -ESRCH;
 }
@@ -1214,16 +1219,20 @@ live_engine_reset_workarounds(void *arg)
 	struct igt_spinner spin;
 	struct i915_request *rq;
 	intel_wakeref_t wakeref;
-	struct wa_lists lists;
+	struct wa_lists *lists;
 	int ret = 0;
 
 	if (!intel_has_reset_engine(gt))
 		return 0;
 
+	lists = kzalloc(sizeof(*lists), GFP_KERNEL);
+	if (!lists)
+		return -ENOMEM;
+
 	igt_global_reset_lock(gt);
 	wakeref = intel_runtime_pm_get(gt->uncore->rpm);
 
-	reference_lists_init(gt, &lists);
+	reference_lists_init(gt, lists);
 
 	for_each_engine(engine, gt, id) {
 		bool ok;
@@ -1235,7 +1244,7 @@ live_engine_reset_workarounds(void *arg)
 			break;
 		}
 
-		ok = verify_wa_lists(gt, &lists, "before reset");
+		ok = verify_wa_lists(gt, lists, "before reset");
 		if (!ok) {
 			ret = -ESRCH;
 			goto err;
@@ -1247,7 +1256,7 @@ live_engine_reset_workarounds(void *arg)
 			goto err;
 		}
 
-		ok = verify_wa_lists(gt, &lists, "after idle reset");
+		ok = verify_wa_lists(gt, lists, "after idle reset");
 		if (!ok) {
 			ret = -ESRCH;
 			goto err;
@@ -1282,7 +1291,7 @@ live_engine_reset_workarounds(void *arg)
 		igt_spinner_end(&spin);
 		igt_spinner_fini(&spin);
 
-		ok = verify_wa_lists(gt, &lists, "after busy reset");
+		ok = verify_wa_lists(gt, lists, "after busy reset");
 		if (!ok) {
 			ret = -ESRCH;
 			goto err;
@@ -1294,9 +1303,10 @@ live_engine_reset_workarounds(void *arg)
 			break;
 	}
 
-	reference_lists_fini(gt, &lists);
+	reference_lists_fini(gt, lists);
 	intel_runtime_pm_put(gt->uncore->rpm, wakeref);
 	igt_global_reset_unlock(gt);
+	kfree(lists);
 
 	igt_flush_test(gt->i915);
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#9 lore raw

PATCH v2 6/50 drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

In reply to Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.

v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko)

---
 drivers/gpu/drm/i915/gt/gen8_engine_cs.c     |  7 ++-
 drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 50 ++++++++++++++++++++
 drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 ++++--
 drivers/gpu/drm/i915/gt/intel_gt_types.h     |  5 +-
 drivers/gpu/drm/i915/i915_reg.h              |  6 +++
 drivers/gpu/drm/i915/intel_device_info.h     |  3 +-
 6 files changed, 74 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3 -4
index 87b06572fd2e..35edc55720f4 100644
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 	if (mode & EMIT_INVALIDATE)
 		aux_inv = rq->engine->mask & ~BIT(BCS0);
 	if (aux_inv)
-		cmd += 2 * hweight8(aux_inv) + 2;
+		cmd += 2 * hweight32(aux_inv) + 2;
 
 	cs = intel_ring_begin(rq, cmd);
 	if (IS_ERR(cs))
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 		struct intel_engine_cs *engine;
 		unsigned int tmp;
 
-		*cs++ = MI_LOAD_REGISTER_IMM(hweight8(aux_inv));
-		for_each_engine_masked(engine, rq->engine->gt,
-				       aux_inv, tmp) {
+		*cs++ = MI_LOAD_REGISTER_IMM(hweight32(aux_inv));
+		for_each_engine_masked(engine, rq->engine->gt, aux_inv, tmp) {
 			*cs++ = i915_mmio_reg_offset(aux_inv_reg(engine));
 			*cs++ = AUX_INV;
 		}
drivers/gpu/drm/i915/gt/intel_engine_cs.c +50 -0

68 lines not on this page · raw message

drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -4
index 1cb9c3b70b29..e0b1cbdbadce 100644
@@ -46,7 +46,7 @@
 #define COPY_ENGINE_CLASS	3
 #define OTHER_CLASS		4
 #define MAX_ENGINE_CLASS	4
-#define MAX_ENGINE_INSTANCE	3
+#define MAX_ENGINE_INSTANCE	7
 
 #define I915_MAX_SLICES	3
 #define I915_MAX_SUBSLICES 8
@@ -64,7 +64,7 @@ struct intel_gt;
 struct intel_ring;
 struct intel_uncore;
 
-typedef u8 intel_engine_mask_t;
+typedef u32 intel_engine_mask_t;
 #define ALL_ENGINES ((intel_engine_mask_t)~0ul)
 
 struct intel_hw_status_page {
@@ -101,8 +101,8 @@ struct i915_ctx_workarounds {
 	struct i915_vma *vma;
 };
 
-#define I915_MAX_VCS	4
-#define I915_MAX_VECS	2
+#define I915_MAX_VCS	8
+#define I915_MAX_VECS	4
 
 /*
  * Engine IDs definitions.
@@ -115,9 +115,15 @@ enum intel_engine_id {
 	VCS1,
 	VCS2,
 	VCS3,
+	VCS4,
+	VCS5,
+	VCS6,
+	VCS7,
 #define _VCS(n) (VCS0 + (n))
 	VECS0,
 	VECS1,
+	VECS2,
+	VECS3,
 #define _VECS(n) (VECS0 + (n))
 	I915_NUM_ENGINES
 #define INVALID_ENGINE ((enum intel_engine_id)-1)
drivers/gpu/drm/i915/gt/intel_gt_types.h +3 -2
index d93d578a4105..97a5075288d2 100644
@@ -174,13 +174,14 @@ struct intel_gt {
 
 	struct intel_gt_info {
 		intel_engine_mask_t engine_mask;
+
+		u32 l3bank_mask;
+
 		u8 num_engines;
 
 		/* Media engine access to SFC per instance */
 		u8 vdbox_sfc_access;
 
-		u32 l3bank_mask;
-
 		/* Slice/subslice/EU info */
 		struct sseu_dev_info sseu;
 	} info;
drivers/gpu/drm/i915/i915_reg.h +6 -0
index 2274e9c01d61..de0c27d67e15 100644
@@ -2516,9 +2516,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN11_BSD2_RING_BASE	0x1c4000
 #define GEN11_BSD3_RING_BASE	0x1d0000
 #define GEN11_BSD4_RING_BASE	0x1d4000
+#define XEHP_BSD5_RING_BASE	0x1e0000
+#define XEHP_BSD6_RING_BASE	0x1e4000
+#define XEHP_BSD7_RING_BASE	0x1f0000
+#define XEHP_BSD8_RING_BASE	0x1f4000
 #define VEBOX_RING_BASE		0x1a000
 #define GEN11_VEBOX_RING_BASE		0x1c8000
 #define GEN11_VEBOX2_RING_BASE		0x1d8000
+#define XEHP_VEBOX3_RING_BASE		0x1e8000
+#define XEHP_VEBOX4_RING_BASE		0x1f8000
 #define BLT_RING_BASE		0x22000
 #define RING_TAIL(base)		_MMIO((base) + 0x30)
 #define RING_HEAD(base)		_MMIO((base) + 0x34)
drivers/gpu/drm/i915/intel_device_info.h +2 -1
index ba7483acc3f7..75d225d0db47 100644
@@ -166,7 +166,6 @@ struct intel_device_info {
 	u8 media_ver;
 	u8 media_rel;
 
-	u8 gt; /* GT number, 0 if undefined */
 	intel_engine_mask_t platform_engine_mask; /* Engines supported by the HW */
 
 	enum intel_platform platform;
@@ -182,6 +181,8 @@ struct intel_device_info {
 
 	u32 display_mmio_offset;
 
+	u8 gt; /* GT number, 0 if undefined */
+
 	u8 pipe_mask;
 	u8 cpu_transcoder_mask;
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: [Intel-gfx] [PATCH v2 06/50] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

Quoted 53 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.

v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko)

---

drivers/gpu/drm/i915/gt/gen8_engine_cs.c     |  7 ++-
drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 50 ++++++++++++++++++++
drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 ++++--
drivers/gpu/drm/i915/gt/intel_gt_types.h     |  5 +-
drivers/gpu/drm/i915/i915_reg.h              |  6 +++
drivers/gpu/drm/i915/intel_device_info.h     |  3 +-
6 files changed, 74 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3 -4
index 87b06572fd2e..35edc55720f4 100644
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 	if (mode & EMIT_INVALIDATE)
 		aux_inv = rq->engine->mask & ~BIT(BCS0);
 	if (aux_inv)
-		cmd += 2 * hweight8(aux_inv) + 2;
+		cmd += 2 * hweight32(aux_inv) + 2;
 
 	cs = intel_ring_begin(rq, cmd);
 	if (IS_ERR(cs))
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 		struct intel_engine_cs *engine;
 		unsigned int tmp;
 
-		*cs++ = MI_LOAD_REGISTER_IMM(hweight8(aux_inv));
-		for_each_engine_masked(engine, rq->engine->gt,
-				       aux_inv, tmp) {
+		*cs++ = MI_LOAD_REGISTER_IMM(hweight32(aux_inv));
+		for_each_engine_masked(engine, rq->engine->gt, aux_inv, tmp) {
 			*cs++ = i915_mmio_reg_offset(aux_inv_reg(engine));
 			*cs++ = AUX_INV;
 		}
drivers/gpu/drm/i915/gt/intel_engine_cs.c +0 -0
index 3f8013612a08..6c2cb1400c8c 100644

drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 108

Quoted 5 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +2 -0
@@ -104,6 +104,38 @@ static const struct engine_info intel_engines[] = {
 			{ .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE }
 		},
 	},
+	[VCS4] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */

I may be misreading this, but hw_id is only used by RING_FAULT_REG() which is not actually used since gen8... they are using GEN8_RING_FAULT_REG().

I'm having a hard time to understand what this comment "see MI_SEMAPHORE_SIGNAL" actually means.

I'd just remove all these .hw_id = 0, ... together with the comment since it will be zero-initiliazed.

Lucas De Marchi

Quoted 183 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +48 -0
+		.class = VIDEO_DECODE_CLASS,
+		.instance = 4,
+		.mmio_bases = {
+			{ .graphics_ver = 11, .base = XEHP_BSD5_RING_BASE }
+		},
+	},
+	[VCS5] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_DECODE_CLASS,
+		.instance = 5,
+		.mmio_bases = {
+			{ .graphics_ver = 12, .base = XEHP_BSD6_RING_BASE }
+		},
+	},
+	[VCS6] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_DECODE_CLASS,
+		.instance = 6,
+		.mmio_bases = {
+			{ .graphics_ver = 12, .base = XEHP_BSD7_RING_BASE }
+		},
+	},
+	[VCS7] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_DECODE_CLASS,
+		.instance = 7,
+		.mmio_bases = {
+			{ .graphics_ver = 12, .base = XEHP_BSD8_RING_BASE }
+		},
+	},
 	[VECS0] = {
 		.hw_id = VECS0_HW,
 		.class = VIDEO_ENHANCEMENT_CLASS,
@@ -121,6 +153,22 @@ static const struct engine_info intel_engines[] = {
 			{ .graphics_ver = 11, .base = GEN11_VEBOX2_RING_BASE }
 		},
 	},
+	[VECS2] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_ENHANCEMENT_CLASS,
+		.instance = 2,
+		.mmio_bases = {
+			{ .graphics_ver = 12, .base = XEHP_VEBOX3_RING_BASE }
+		},
+	},
+	[VECS3] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_ENHANCEMENT_CLASS,
+		.instance = 3,
+		.mmio_bases = {
+			{ .graphics_ver = 12, .base = XEHP_VEBOX4_RING_BASE }
+		},
+	},
 };
 
 /**
@@ -269,6 +317,8 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id)
 
 	BUILD_BUG_ON(MAX_ENGINE_CLASS >= BIT(GEN11_ENGINE_CLASS_WIDTH));
 	BUILD_BUG_ON(MAX_ENGINE_INSTANCE >= BIT(GEN11_ENGINE_INSTANCE_WIDTH));
+	BUILD_BUG_ON(I915_MAX_VCS > (MAX_ENGINE_INSTANCE + 1));
+	BUILD_BUG_ON(I915_MAX_VECS > (MAX_ENGINE_INSTANCE + 1));
 
 	if (GEM_DEBUG_WARN_ON(id >= ARRAY_SIZE(gt->engine)))
 		return -EINVAL;
drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -4
index 1cb9c3b70b29..e0b1cbdbadce 100644
@@ -46,7 +46,7 @@
 #define COPY_ENGINE_CLASS	3
 #define OTHER_CLASS		4
 #define MAX_ENGINE_CLASS	4
-#define MAX_ENGINE_INSTANCE	3
+#define MAX_ENGINE_INSTANCE	7
 
 #define I915_MAX_SLICES	3
 #define I915_MAX_SUBSLICES 8
@@ -64,7 +64,7 @@ struct intel_gt;
 struct intel_ring;
 struct intel_uncore;
 
-typedef u8 intel_engine_mask_t;
+typedef u32 intel_engine_mask_t;
 #define ALL_ENGINES ((intel_engine_mask_t)~0ul)
 
 struct intel_hw_status_page {
@@ -101,8 +101,8 @@ struct i915_ctx_workarounds {
 	struct i915_vma *vma;
 };
 
-#define I915_MAX_VCS	4
-#define I915_MAX_VECS	2
+#define I915_MAX_VCS	8
+#define I915_MAX_VECS	4
 
 /*
 * Engine IDs definitions.
@@ -115,9 +115,15 @@ enum intel_engine_id {
 	VCS1,
 	VCS2,
 	VCS3,
+	VCS4,
+	VCS5,
+	VCS6,
+	VCS7,
 #define _VCS(n) (VCS0 + (n))
 	VECS0,
 	VECS1,
+	VECS2,
+	VECS3,
 #define _VECS(n) (VECS0 + (n))
 	I915_NUM_ENGINES
 #define INVALID_ENGINE ((enum intel_engine_id)-1)
drivers/gpu/drm/i915/gt/intel_gt_types.h +3 -2
index d93d578a4105..97a5075288d2 100644
@@ -174,13 +174,14 @@ struct intel_gt {
 
 	struct intel_gt_info {
 		intel_engine_mask_t engine_mask;
+
+		u32 l3bank_mask;
+
 		u8 num_engines;
 
 		/* Media engine access to SFC per instance */
 		u8 vdbox_sfc_access;
 
-		u32 l3bank_mask;
-
 		/* Slice/subslice/EU info */
 		struct sseu_dev_info sseu;
 	} info;
drivers/gpu/drm/i915/i915_reg.h +6 -0
index 2274e9c01d61..de0c27d67e15 100644
@@ -2516,9 +2516,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN11_BSD2_RING_BASE	0x1c4000
 #define GEN11_BSD3_RING_BASE	0x1d0000
 #define GEN11_BSD4_RING_BASE	0x1d4000
+#define XEHP_BSD5_RING_BASE	0x1e0000
+#define XEHP_BSD6_RING_BASE	0x1e4000
+#define XEHP_BSD7_RING_BASE	0x1f0000
+#define XEHP_BSD8_RING_BASE	0x1f4000
 #define VEBOX_RING_BASE		0x1a000
 #define GEN11_VEBOX_RING_BASE		0x1c8000
 #define GEN11_VEBOX2_RING_BASE		0x1d8000
+#define XEHP_VEBOX3_RING_BASE		0x1e8000
+#define XEHP_VEBOX4_RING_BASE		0x1f8000
 #define BLT_RING_BASE		0x22000
 #define RING_TAIL(base)		_MMIO((base) + 0x30)
 #define RING_HEAD(base)		_MMIO((base) + 0x34)
drivers/gpu/drm/i915/intel_device_info.h +2 -1
index ba7483acc3f7..75d225d0db47 100644
@@ -166,7 +166,6 @@ struct intel_device_info {
 	u8 media_ver;
 	u8 media_rel;
 
-	u8 gt; /* GT number, 0 if undefined */
 	intel_engine_mask_t platform_engine_mask; /* Engines supported by the HW */
 
 	enum intel_platform platform;
@@ -182,6 +181,8 @@ struct intel_device_info {
 
 	u32 display_mmio_offset;
 
+	u8 gt; /* GT number, 0 if undefined */
+
 	u8 pipe_mask;
 	u8 cpu_transcoder_mask;
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

Re: [Intel-gfx] [PATCH v2 06/50] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

Quoted 66 lines · Lucas De Marchi
Quoted 55 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.

v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t.  (Tvrtko)

---
drivers/gpu/drm/i915/gt/gen8_engine_cs.c     |  7 ++- drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 50 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 ++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h     |  5 +- drivers/gpu/drm/i915/i915_reg.h              |  6 +++ drivers/gpu/drm/i915/intel_device_info.h     |  3 +-

6 files changed, 74 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +1 -1
index 87b06572fd2e..35edc55720f4 100644
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, 
 u32 mode)
     if (mode & EMIT_INVALIDATE)
         aux_inv = rq->engine->mask & ~BIT(BCS0);
     if (aux_inv)
-        cmd += 2 * hweight8(aux_inv) + 2;
+        cmd += 2 * hweight32(aux_inv) + 2;
 
     cs = intel_ring_begin(rq, cmd);

    if (IS_ERR(cs))

drivers/gpu/drm/i915/gt/gen8_engine_cs.c +2 -3
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, 
 u32 mode)
         struct intel_engine_cs *engine;
         unsigned int tmp;
 
-        *cs++ = MI_LOAD_REGISTER_IMM(hweight8(aux_inv));
-        for_each_engine_masked(engine, rq->engine->gt,
-                       aux_inv, tmp) {
+        *cs++ = MI_LOAD_REGISTER_IMM(hweight32(aux_inv));
+        for_each_engine_masked(engine, rq->engine->gt, aux_inv, tmp) {
             *cs++ = i915_mmio_reg_offset(aux_inv_reg(engine));
             *cs++ = AUX_INV;

        }

drivers/gpu/drm/i915/gt/intel_engine_cs.c +0 -0
index 3f8013612a08..6c2cb1400c8c 100644

drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 108

Quoted 5 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +2 -0
@@ -104,6 +104,38 @@ static const struct engine_info intel_engines[] = {
             { .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE }
         },
     },
+    [VCS4] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */

I may be misreading this, but hw_id is only used by RING_FAULT_REG() which is not actually used since gen8... they are using GEN8_RING_FAULT_REG().

Quoted 2 lines

I'm having a hard time to understand what this comment "see MI_SEMAPHORE_SIGNAL" actually means.

I vaguely recall something about being told the hw_id field was used in semaphore messages from one engine to another. I.e. if engine X is blocked on a semaphore that is signalled by engine Y then the MI_ instruction executed on Y to do the signal needs to specify X as the target. Whereas, on newer hardware this requirement was no longer applicable because MI_SEMAPHORE_SIGNAL uses memory mailboxes instead of directed engine messages. Maybe that information was wrong or maybe that code has since been removed or reworked?

Quoted 4 lines

I'd just remove all these .hw_id = 0, ... together with the comment since it will be zero-initiliazed.

Yeah, the reason for explicitly setting it to zero was to avoid confusion over whether it had just been forgotten or not. I.e. to say 'we know semaphores used to use this field but honest guv, we didn't forget to add it, it's just that newer hardware doesn't need it'.

John.

Quoted 185 lines

Lucas De Marchi

Quoted 181 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +48 -0
+        .class = VIDEO_DECODE_CLASS,
+        .instance = 4,
+        .mmio_bases = {
+            { .graphics_ver = 11, .base = XEHP_BSD5_RING_BASE }
+        },
+    },
+    [VCS5] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+        .class = VIDEO_DECODE_CLASS,
+        .instance = 5,
+        .mmio_bases = {
+            { .graphics_ver = 12, .base = XEHP_BSD6_RING_BASE }
+        },
+    },
+    [VCS6] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+        .class = VIDEO_DECODE_CLASS,
+        .instance = 6,
+        .mmio_bases = {
+            { .graphics_ver = 12, .base = XEHP_BSD7_RING_BASE }
+        },
+    },
+    [VCS7] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+        .class = VIDEO_DECODE_CLASS,
+        .instance = 7,
+        .mmio_bases = {
+            { .graphics_ver = 12, .base = XEHP_BSD8_RING_BASE }
+        },
+    },
     [VECS0] = {
         .hw_id = VECS0_HW,
         .class = VIDEO_ENHANCEMENT_CLASS,
@@ -121,6 +153,22 @@ static const struct engine_info intel_engines[] = {
             { .graphics_ver = 11, .base = GEN11_VEBOX2_RING_BASE }
         },
     },
+    [VECS2] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+        .class = VIDEO_ENHANCEMENT_CLASS,
+        .instance = 2,
+        .mmio_bases = {
+            { .graphics_ver = 12, .base = XEHP_VEBOX3_RING_BASE }
+        },
+    },
+    [VECS3] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+        .class = VIDEO_ENHANCEMENT_CLASS,
+        .instance = 3,
+        .mmio_bases = {
+            { .graphics_ver = 12, .base = XEHP_VEBOX4_RING_BASE }
+        },
+    },
 };
 
 /**
@@ -269,6 +317,8 @@ static int intel_engine_setup(struct intel_gt 
 *gt, enum intel_engine_id id)
 
     BUILD_BUG_ON(MAX_ENGINE_CLASS >= BIT(GEN11_ENGINE_CLASS_WIDTH));
     BUILD_BUG_ON(MAX_ENGINE_INSTANCE >= BIT(GEN11_ENGINE_INSTANCE_WIDTH));
+    BUILD_BUG_ON(I915_MAX_VCS > (MAX_ENGINE_INSTANCE + 1));
+    BUILD_BUG_ON(I915_MAX_VECS > (MAX_ENGINE_INSTANCE + 1));
 
     if (GEM_DEBUG_WARN_ON(id >= ARRAY_SIZE(gt->engine)))

        return -EINVAL;

drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -4
index 1cb9c3b70b29..e0b1cbdbadce 100644
@@ -46,7 +46,7 @@
 #define COPY_ENGINE_CLASS    3
 #define OTHER_CLASS        4
 #define MAX_ENGINE_CLASS    4
-#define MAX_ENGINE_INSTANCE    3
+#define MAX_ENGINE_INSTANCE    7
 
 #define I915_MAX_SLICES    3
 #define I915_MAX_SUBSLICES 8
@@ -64,7 +64,7 @@ struct intel_gt;
 struct intel_ring;
 struct intel_uncore;
 
-typedef u8 intel_engine_mask_t;
+typedef u32 intel_engine_mask_t;
 #define ALL_ENGINES ((intel_engine_mask_t)~0ul)
 
 struct intel_hw_status_page {
@@ -101,8 +101,8 @@ struct i915_ctx_workarounds {
     struct i915_vma *vma;
 };
 
-#define I915_MAX_VCS    4
-#define I915_MAX_VECS    2
+#define I915_MAX_VCS    8
+#define I915_MAX_VECS    4
 
 /*
  * Engine IDs definitions.
@@ -115,9 +115,15 @@ enum intel_engine_id {
     VCS1,
     VCS2,
     VCS3,
+    VCS4,
+    VCS5,
+    VCS6,
+    VCS7,
 #define _VCS(n) (VCS0 + (n))
     VECS0,
     VECS1,
+    VECS2,
+    VECS3,
 #define _VECS(n) (VECS0 + (n))

    I915_NUM_ENGINES
#define INVALID_ENGINE ((enum intel_engine_id)-1)

drivers/gpu/drm/i915/gt/intel_gt_types.h +3 -2
index d93d578a4105..97a5075288d2 100644
@@ -174,13 +174,14 @@ struct intel_gt {
 
     struct intel_gt_info {
         intel_engine_mask_t engine_mask;
+
+        u32 l3bank_mask;
+
         u8 num_engines;
 
         /* Media engine access to SFC per instance */
         u8 vdbox_sfc_access;
 
-        u32 l3bank_mask;
-
         /* Slice/subslice/EU info */
         struct sseu_dev_info sseu;
     } info;
drivers/gpu/drm/i915/i915_reg.h +6 -0
index 2274e9c01d61..de0c27d67e15 100644
@@ -2516,9 +2516,15 @@ static inline bool 
 i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN11_BSD2_RING_BASE    0x1c4000
 #define GEN11_BSD3_RING_BASE    0x1d0000
 #define GEN11_BSD4_RING_BASE    0x1d4000
+#define XEHP_BSD5_RING_BASE    0x1e0000
+#define XEHP_BSD6_RING_BASE    0x1e4000
+#define XEHP_BSD7_RING_BASE    0x1f0000
+#define XEHP_BSD8_RING_BASE    0x1f4000
 #define VEBOX_RING_BASE        0x1a000
 #define GEN11_VEBOX_RING_BASE        0x1c8000
 #define GEN11_VEBOX2_RING_BASE        0x1d8000
+#define XEHP_VEBOX3_RING_BASE        0x1e8000
+#define XEHP_VEBOX4_RING_BASE        0x1f8000
 #define BLT_RING_BASE        0x22000
 #define RING_TAIL(base)        _MMIO((base) + 0x30)

#define RING_HEAD(base)        _MMIO((base) + 0x34)

drivers/gpu/drm/i915/intel_device_info.h +0 -1
index ba7483acc3f7..75d225d0db47 100644
@@ -166,7 +166,6 @@ struct intel_device_info {
     u8 media_ver;
     u8 media_rel;
 
-    u8 gt; /* GT number, 0 if undefined */

    intel_engine_mask_t platform_engine_mask; /* Engines supported by the HW */

    enum intel_platform platform;

drivers/gpu/drm/i915/intel_device_info.h +2 -0
@@ -182,6 +181,8 @@ struct intel_device_info {
 
     u32 display_mmio_offset;
 
+    u8 gt; /* GT number, 0 if undefined */
+
     u8 pipe_mask;
     u8 cpu_transcoder_mask;
 
Signature · 1 line
2.25.4
Quoted 8 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

Re: [Intel-gfx] [PATCH v2 06/50] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

Quoted 69 lines · John Harrison
Quoted 66 lines · Lucas De Marchi
Quoted 55 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.

v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t.  (Tvrtko)

---
drivers/gpu/drm/i915/gt/gen8_engine_cs.c     |  7 ++- drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 50 ++++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 ++++-- drivers/gpu/drm/i915/gt/intel_gt_types.h     |  5 +- drivers/gpu/drm/i915/i915_reg.h              |  6 +++ drivers/gpu/drm/i915/intel_device_info.h     |  3 +-

6 files changed, 74 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +1 -1
index 87b06572fd2e..35edc55720f4 100644
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request 
 *rq, u32 mode)
     if (mode & EMIT_INVALIDATE)
         aux_inv = rq->engine->mask & ~BIT(BCS0);
     if (aux_inv)
-        cmd += 2 * hweight8(aux_inv) + 2;
+        cmd += 2 * hweight32(aux_inv) + 2;
 
     cs = intel_ring_begin(rq, cmd);

    if (IS_ERR(cs))

drivers/gpu/drm/i915/gt/gen8_engine_cs.c +2 -3
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request 
 *rq, u32 mode)
         struct intel_engine_cs *engine;
         unsigned int tmp;
 
-        *cs++ = MI_LOAD_REGISTER_IMM(hweight8(aux_inv));
-        for_each_engine_masked(engine, rq->engine->gt,
-                       aux_inv, tmp) {
+        *cs++ = MI_LOAD_REGISTER_IMM(hweight32(aux_inv));
+        for_each_engine_masked(engine, rq->engine->gt, aux_inv, tmp) {
             *cs++ = i915_mmio_reg_offset(aux_inv_reg(engine));
             *cs++ = AUX_INV;

        }

drivers/gpu/drm/i915/gt/intel_engine_cs.c +0 -0
index 3f8013612a08..6c2cb1400c8c 100644

drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 108

Quoted 5 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +2 -0
@@ -104,6 +104,38 @@ static const struct engine_info intel_engines[] = {
             { .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE }
         },
     },
+    [VCS4] = {
+        .hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */

I may be misreading this, but hw_id is only used by RING_FAULT_REG() which is not actually used since gen8... they are using GEN8_RING_FAULT_REG().

Quoted 2 lines

I'm having a hard time to understand what this comment "see MI_SEMAPHORE_SIGNAL" actually means.

Quoted 8 lines

I vaguely recall something about being told the hw_id field was used in semaphore messages from one engine to another. I.e. if engine X is blocked on a semaphore that is signalled by engine Y then the MI_ instruction executed on Y to do the signal needs to specify X as the target. Whereas, on newer hardware this requirement was no longer applicable because MI_SEMAPHORE_SIGNAL uses memory mailboxes instead of directed engine messages. Maybe that information was wrong or maybe that code has since been removed or reworked?

Quoted 4 lines

I'd just remove all these .hw_id = 0, ... together with the comment since it will be zero-initiliazed.

Yeah, the reason for explicitly setting it to zero was to avoid confusion over whether it had just been forgotten or not. I.e. to say 'we know semaphores used to use this field but honest guv, we didn't forget to add it, it's just that newer hardware doesn't need it'.

makes sense... I just sent a patch series and Cc'ed you all
(https://patchwork.freedesktop.org/series/92797/) actually removing hw_id. I have that feeling I'm missing something, but we can try to simplify.

thanks
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#13 lore raw

Re: [Intel-gfx] [PATCH v2 06/50] drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

In reply to Matt Roper
Quoted 53 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the basic definitions for them.

v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid unnecessary padding now that we've increased the size of intel_engine_mask_t. (Tvrtko)

---

drivers/gpu/drm/i915/gt/gen8_engine_cs.c     |  7 ++-
drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 50 ++++++++++++++++++++
drivers/gpu/drm/i915/gt/intel_engine_types.h | 14 ++++--
drivers/gpu/drm/i915/gt/intel_gt_types.h     |  5 +-
drivers/gpu/drm/i915/i915_reg.h              |  6 +++
drivers/gpu/drm/i915/intel_device_info.h     |  3 +-
6 files changed, 74 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/gt/gen8_engine_cs.c +3 -4
index 87b06572fd2e..35edc55720f4 100644
@@ -279,7 +279,7 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 	if (mode & EMIT_INVALIDATE)
 		aux_inv = rq->engine->mask & ~BIT(BCS0);
 	if (aux_inv)
-		cmd += 2 * hweight8(aux_inv) + 2;
+		cmd += 2 * hweight32(aux_inv) + 2;
 
 	cs = intel_ring_begin(rq, cmd);
 	if (IS_ERR(cs))
@@ -313,9 +313,8 @@ int gen12_emit_flush_xcs(struct i915_request *rq, u32 mode)
 		struct intel_engine_cs *engine;
 		unsigned int tmp;
 
-		*cs++ = MI_LOAD_REGISTER_IMM(hweight8(aux_inv));
-		for_each_engine_masked(engine, rq->engine->gt,
-				       aux_inv, tmp) {
+		*cs++ = MI_LOAD_REGISTER_IMM(hweight32(aux_inv));
+		for_each_engine_masked(engine, rq->engine->gt, aux_inv, tmp) {
 			*cs++ = i915_mmio_reg_offset(aux_inv_reg(engine));
 			*cs++ = AUX_INV;
 		}
drivers/gpu/drm/i915/gt/intel_engine_cs.c +0 -0
index 3f8013612a08..6c2cb1400c8c 100644

drivers/gpu/drm/i915/gt/intel_engine_cs.c static const struct engine_info intel_engines[] = { · line 112

Quoted 9 lines
drivers/gpu/drm/i915/gt/intel_engine_cs.c +6 -0
@@ -104,6 +104,38 @@ static const struct engine_info intel_engines[] = {
 			{ .graphics_ver = 11, .base = GEN11_BSD4_RING_BASE }
 		},
 	},
+	[VCS4] = {
+		.hw_id = 0, /* not used in GEN12+, see MI_SEMAPHORE_SIGNAL */
+		.class = VIDEO_DECODE_CLASS,
+		.instance = 4,
+		.mmio_bases = {
+			{ .graphics_ver = 11, .base = XEHP_BSD5_RING_BASE }

another weird thing in this... we are using XEHP_BSD5_RING_BASE, but we set .graphics_ver to 11. Was that a typo? From bspec 11754 and 3293 it seems the register is there, but it doesn't mean it can actually be used according to bspec 21137 and 20189. So I guess it was either a typo or a rebase issue and should be changed to graphics_ver = 12.

thanks
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#14 lore raw

PATCH v2 7/50 drm/i915/xehp: Extra media engines - Part 2 (interrupts)

In reply to Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the interrupt handler support for them.

---
 drivers/gpu/drm/i915/gt/intel_gt_irq.c | 13 ++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h        |  3 +++
 2 files changed, 15 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_gt_irq.c +12 -1
index c13462274fe8..b2de83be4d97 100644
@@ -184,7 +184,13 @@ void gen11_gt_irq_reset(struct intel_gt *gt)
 	intel_uncore_write(uncore, GEN11_BCS_RSVD_INTR_MASK,	~0);
 	intel_uncore_write(uncore, GEN11_VCS0_VCS1_INTR_MASK,	~0);
 	intel_uncore_write(uncore, GEN11_VCS2_VCS3_INTR_MASK,	~0);
+	if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5))
+		intel_uncore_write(uncore, GEN12_VCS4_VCS5_INTR_MASK,   ~0);
+	if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7))
+		intel_uncore_write(uncore, GEN12_VCS6_VCS7_INTR_MASK,   ~0);
 	intel_uncore_write(uncore, GEN11_VECS0_VECS1_INTR_MASK,	~0);
+	if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3))
+		intel_uncore_write(uncore, GEN12_VECS2_VECS3_INTR_MASK, ~0);
 
 	intel_uncore_write(uncore, GEN11_GPM_WGBOXPERF_INTR_ENABLE, 0);
 	intel_uncore_write(uncore, GEN11_GPM_WGBOXPERF_INTR_MASK,  ~0);
@@ -218,8 +224,13 @@ void gen11_gt_irq_postinstall(struct intel_gt *gt)
 	intel_uncore_write(uncore, GEN11_BCS_RSVD_INTR_MASK, ~smask);
 	intel_uncore_write(uncore, GEN11_VCS0_VCS1_INTR_MASK, ~dmask);
 	intel_uncore_write(uncore, GEN11_VCS2_VCS3_INTR_MASK, ~dmask);
+	if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5))
+		intel_uncore_write(uncore, GEN12_VCS4_VCS5_INTR_MASK, ~dmask);
+	if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7))
+		intel_uncore_write(uncore, GEN12_VCS6_VCS7_INTR_MASK, ~dmask);
 	intel_uncore_write(uncore, GEN11_VECS0_VECS1_INTR_MASK, ~dmask);
-
+	if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3))
+		intel_uncore_write(uncore, GEN12_VECS2_VECS3_INTR_MASK, ~dmask);
 	/*
 	 * RPS interrupts will get enabled/disabled on demand when RPS itself
 	 * is enabled/disabled.
drivers/gpu/drm/i915/i915_reg.h +3 -0
index de0c27d67e15..af8f14fe4026 100644
@@ -8076,7 +8076,10 @@ enum {
 #define GEN11_BCS_RSVD_INTR_MASK	_MMIO(0x1900a0)
 #define GEN11_VCS0_VCS1_INTR_MASK	_MMIO(0x1900a8)
 #define GEN11_VCS2_VCS3_INTR_MASK	_MMIO(0x1900ac)
+#define GEN12_VCS4_VCS5_INTR_MASK	_MMIO(0x1900b0)
+#define GEN12_VCS6_VCS7_INTR_MASK	_MMIO(0x1900b4)
 #define GEN11_VECS0_VECS1_INTR_MASK	_MMIO(0x1900d0)
+#define GEN12_VECS2_VECS3_INTR_MASK	_MMIO(0x1900d4)
 #define GEN11_GUC_SG_INTR_MASK		_MMIO(0x1900e8)
 #define GEN11_GPM_WGBOXPERF_INTR_MASK	_MMIO(0x1900ec)
 #define GEN11_CRYPTO_RSVD_INTR_MASK	_MMIO(0x1900f0)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#15 lore raw

PATCH v2 8/50 drm/i915/xehp: Extra media engines - Part 3 (reset)

In reply to Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the reset support for them.

---
 drivers/gpu/drm/i915/gt/intel_reset.c | 6 ++++++
 drivers/gpu/drm/i915/i915_reg.h       | 8 ++++++++
 2 files changed, 14 insertions(+)
drivers/gpu/drm/i915/gt/intel_reset.c +6 -0
index 72251638d4ea..9586613ee399 100644
@@ -515,8 +515,14 @@ static int gen11_reset_engines(struct intel_gt *gt,
 		[VCS1]  = GEN11_GRDOM_MEDIA2,
 		[VCS2]  = GEN11_GRDOM_MEDIA3,
 		[VCS3]  = GEN11_GRDOM_MEDIA4,
+		[VCS4]  = GEN11_GRDOM_MEDIA5,
+		[VCS5]  = GEN11_GRDOM_MEDIA6,
+		[VCS6]  = GEN11_GRDOM_MEDIA7,
+		[VCS7]  = GEN11_GRDOM_MEDIA8,
 		[VECS0] = GEN11_GRDOM_VECS,
 		[VECS1] = GEN11_GRDOM_VECS2,
+		[VECS2] = GEN11_GRDOM_VECS3,
+		[VECS3] = GEN11_GRDOM_VECS4,
 	};
 	struct intel_engine_cs *engine;
 	intel_engine_mask_t tmp;
drivers/gpu/drm/i915/i915_reg.h +8 -0
index af8f14fe4026..1eca88ac7057 100644
@@ -395,10 +395,18 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  GEN11_GRDOM_MEDIA2		(1 << 6)
 #define  GEN11_GRDOM_MEDIA3		(1 << 7)
 #define  GEN11_GRDOM_MEDIA4		(1 << 8)
+#define  GEN11_GRDOM_MEDIA5		(1 << 9)
+#define  GEN11_GRDOM_MEDIA6		(1 << 10)
+#define  GEN11_GRDOM_MEDIA7		(1 << 11)
+#define  GEN11_GRDOM_MEDIA8		(1 << 12)
 #define  GEN11_GRDOM_VECS		(1 << 13)
 #define  GEN11_GRDOM_VECS2		(1 << 14)
+#define  GEN11_GRDOM_VECS3		(1 << 15)
+#define  GEN11_GRDOM_VECS4		(1 << 16)
 #define  GEN11_GRDOM_SFC0		(1 << 17)
 #define  GEN11_GRDOM_SFC1		(1 << 18)
+#define  GEN11_GRDOM_SFC2		(1 << 19)
+#define  GEN11_GRDOM_SFC3		(1 << 20)
 
 #define  GEN11_VCS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << ((instance) >> 1))
 #define  GEN11_VECS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << (instance))
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 8/50
#16 lore raw

Re: [Intel-gfx] [PATCH v2 08/50] drm/i915/xehp: Extra media engines - Part 3 (reset)

Quoted 4 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the reset support for them.

Quoted 40 lines
---
 drivers/gpu/drm/i915/gt/intel_reset.c | 6 ++++++
 drivers/gpu/drm/i915/i915_reg.h       | 8 ++++++++
 2 files changed, 14 insertions(+)
drivers/gpu/drm/i915/gt/intel_reset.c +6 -0
index 72251638d4ea..9586613ee399 100644
@@ -515,8 +515,14 @@ static int gen11_reset_engines(struct intel_gt *gt,
 		[VCS1]  = GEN11_GRDOM_MEDIA2,
 		[VCS2]  = GEN11_GRDOM_MEDIA3,
 		[VCS3]  = GEN11_GRDOM_MEDIA4,
+		[VCS4]  = GEN11_GRDOM_MEDIA5,
+		[VCS5]  = GEN11_GRDOM_MEDIA6,
+		[VCS6]  = GEN11_GRDOM_MEDIA7,
+		[VCS7]  = GEN11_GRDOM_MEDIA8,
 		[VECS0] = GEN11_GRDOM_VECS,
 		[VECS1] = GEN11_GRDOM_VECS2,
+		[VECS2] = GEN11_GRDOM_VECS3,
+		[VECS3] = GEN11_GRDOM_VECS4,
 	};
 	struct intel_engine_cs *engine;
 	intel_engine_mask_t tmp;
drivers/gpu/drm/i915/i915_reg.h +4 -0
index af8f14fe4026..1eca88ac7057 100644
@@ -395,10 +395,18 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  GEN11_GRDOM_MEDIA2		(1 << 6)
 #define  GEN11_GRDOM_MEDIA3		(1 << 7)
 #define  GEN11_GRDOM_MEDIA4		(1 << 8)
+#define  GEN11_GRDOM_MEDIA5		(1 << 9)
+#define  GEN11_GRDOM_MEDIA6		(1 << 10)
+#define  GEN11_GRDOM_MEDIA7		(1 << 11)
+#define  GEN11_GRDOM_MEDIA8		(1 << 12)
 #define  GEN11_GRDOM_VECS		(1 << 13)

drivers/gpu/drm/i915/i915_reg.h static inline bool i915_mmio_reg_valid(i915_reg_t reg) · line 412

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +4 -0
 #define  GEN11_GRDOM_VECS2		(1 << 14)
+#define  GEN11_GRDOM_VECS3		(1 << 15)
+#define  GEN11_GRDOM_VECS4		(1 << 16)
 #define  GEN11_GRDOM_SFC0		(1 << 17)
 #define  GEN11_GRDOM_SFC1		(1 << 18)
+#define  GEN11_GRDOM_SFC2		(1 << 19)
+#define  GEN11_GRDOM_SFC3		(1 << 20)
 
 #define  GEN11_VCS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << ((instance) >> 1))
 #define  GEN11_VECS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << (instance))

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v2 8/50
#17 lore raw

Re: [Intel-gfx] [PATCH v2 08/50] drm/i915/xehp: Extra media engines - Part 3 (reset)

In reply to Matt Roper
Quoted 7 lines · Matt Roper

From: John Harrison <[email protected]>

Xe_HP can have a lot of extra media engines. This patch adds the reset support for them.

Quoted 54 lines
---
 drivers/gpu/drm/i915/gt/intel_reset.c | 6 ++++++
 drivers/gpu/drm/i915/i915_reg.h       | 8 ++++++++
 2 files changed, 14 insertions(+)
drivers/gpu/drm/i915/gt/intel_reset.c +6 -0
index 72251638d4ea..9586613ee399 100644
@@ -515,8 +515,14 @@ static int gen11_reset_engines(struct intel_gt *gt,
 		[VCS1]  = GEN11_GRDOM_MEDIA2,
 		[VCS2]  = GEN11_GRDOM_MEDIA3,
 		[VCS3]  = GEN11_GRDOM_MEDIA4,
+		[VCS4]  = GEN11_GRDOM_MEDIA5,
+		[VCS5]  = GEN11_GRDOM_MEDIA6,
+		[VCS6]  = GEN11_GRDOM_MEDIA7,
+		[VCS7]  = GEN11_GRDOM_MEDIA8,
 		[VECS0] = GEN11_GRDOM_VECS,
 		[VECS1] = GEN11_GRDOM_VECS2,
+		[VECS2] = GEN11_GRDOM_VECS3,
+		[VECS3] = GEN11_GRDOM_VECS4,
 	};
 	struct intel_engine_cs *engine;
 	intel_engine_mask_t tmp;
drivers/gpu/drm/i915/i915_reg.h +8 -0
index af8f14fe4026..1eca88ac7057 100644
@@ -395,10 +395,18 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define  GEN11_GRDOM_MEDIA2		(1 << 6)
 #define  GEN11_GRDOM_MEDIA3		(1 << 7)
 #define  GEN11_GRDOM_MEDIA4		(1 << 8)
+#define  GEN11_GRDOM_MEDIA5		(1 << 9)
+#define  GEN11_GRDOM_MEDIA6		(1 << 10)
+#define  GEN11_GRDOM_MEDIA7		(1 << 11)
+#define  GEN11_GRDOM_MEDIA8		(1 << 12)
 #define  GEN11_GRDOM_VECS		(1 << 13)
 #define  GEN11_GRDOM_VECS2		(1 << 14)
+#define  GEN11_GRDOM_VECS3		(1 << 15)
+#define  GEN11_GRDOM_VECS4		(1 << 16)
 #define  GEN11_GRDOM_SFC0		(1 << 17)
 #define  GEN11_GRDOM_SFC1		(1 << 18)
+#define  GEN11_GRDOM_SFC2		(1 << 19)
+#define  GEN11_GRDOM_SFC3		(1 << 20)
 
 #define  GEN11_VCS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << ((instance) >> 1))
 #define  GEN11_VECS_SFC_RESET_BIT(instance)	(GEN11_GRDOM_SFC0 << (instance))
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#18 lore raw

PATCH v2 9/50 drm/i915/xehp: Xe_HP forcewake support

In reply to Matt Roper

Implement Xe_HP forcewake handling. While we're at it, let's reorder to the forcewake assignment if/else ladder to match our usual driver conventions.

---
 .../drm/i915/gt/intel_execlists_submission.c  |   4 +
 drivers/gpu/drm/i915/intel_uncore.c           | 336 +++++++++++++++---
 drivers/gpu/drm/i915/intel_uncore.h           |  14 +-
 drivers/gpu/drm/i915/selftests/intel_uncore.c |   2 +
 4 files changed, 302 insertions(+), 54 deletions(-)
drivers/gpu/drm/i915/gt/intel_execlists_submission.c +4 -0
index 56e25090da67..cf1ac0010056 100644
@@ -3306,6 +3306,10 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 			i915_mmio_reg_offset(RING_EXECLIST_SQ_CONTENTS(base));
 		execlists->ctrl_reg = uncore->regs +
 			i915_mmio_reg_offset(RING_EXECLIST_CONTROL(base));
+
+		engine->fw_domain = intel_uncore_forcewake_for_reg(engine->uncore,
+				    RING_EXECLIST_CONTROL(engine->mmio_base),
+				    FW_REG_WRITE);
 	} else {
 		execlists->submit_reg = uncore->regs +
 			i915_mmio_reg_offset(RING_ELSP(base));
drivers/gpu/drm/i915/intel_uncore.c +283 -53

412 lines not on this page · raw message

drivers/gpu/drm/i915/intel_uncore.h +13 -1
index a18bdb57af7b..3c0b0a8b5250 100644
@@ -52,8 +52,14 @@ enum forcewake_domain_id {
 	FW_DOMAIN_ID_MEDIA_VDBOX1,
 	FW_DOMAIN_ID_MEDIA_VDBOX2,
 	FW_DOMAIN_ID_MEDIA_VDBOX3,
+	FW_DOMAIN_ID_MEDIA_VDBOX4,
+	FW_DOMAIN_ID_MEDIA_VDBOX5,
+	FW_DOMAIN_ID_MEDIA_VDBOX6,
+	FW_DOMAIN_ID_MEDIA_VDBOX7,
 	FW_DOMAIN_ID_MEDIA_VEBOX0,
 	FW_DOMAIN_ID_MEDIA_VEBOX1,
+	FW_DOMAIN_ID_MEDIA_VEBOX2,
+	FW_DOMAIN_ID_MEDIA_VEBOX3,
 
 	FW_DOMAIN_ID_COUNT
 };
@@ -66,10 +72,16 @@ enum forcewake_domains {
 	FORCEWAKE_MEDIA_VDBOX1	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX1),
 	FORCEWAKE_MEDIA_VDBOX2	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX2),
 	FORCEWAKE_MEDIA_VDBOX3	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX3),
+	FORCEWAKE_MEDIA_VDBOX4	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX4),
+	FORCEWAKE_MEDIA_VDBOX5	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX5),
+	FORCEWAKE_MEDIA_VDBOX6	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX6),
+	FORCEWAKE_MEDIA_VDBOX7	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX7),
 	FORCEWAKE_MEDIA_VEBOX0	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX0),
 	FORCEWAKE_MEDIA_VEBOX1	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX1),
+	FORCEWAKE_MEDIA_VEBOX2	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX2),
+	FORCEWAKE_MEDIA_VEBOX3	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX3),
 
-	FORCEWAKE_ALL = BIT(FW_DOMAIN_ID_COUNT) - 1
+	FORCEWAKE_ALL = BIT(FW_DOMAIN_ID_COUNT) - 1,
 };
 
 struct intel_uncore_funcs {
drivers/gpu/drm/i915/selftests/intel_uncore.c +2 -0
index 8ef9e6a4ad05..720b60853f8b 100644
@@ -68,6 +68,7 @@ static int intel_shadow_table_check(void)
 		{ gen8_shadowed_regs, ARRAY_SIZE(gen8_shadowed_regs) },
 		{ gen11_shadowed_regs, ARRAY_SIZE(gen11_shadowed_regs) },
 		{ gen12_shadowed_regs, ARRAY_SIZE(gen12_shadowed_regs) },
+		{ xehp_shadowed_regs, ARRAY_SIZE(xehp_shadowed_regs) },
 	};
 	const i915_reg_t *reg;
 	unsigned int i, j;
@@ -103,6 +104,7 @@ int intel_uncore_mock_selftests(void)
 		{ __gen9_fw_ranges, ARRAY_SIZE(__gen9_fw_ranges), true },
 		{ __gen11_fw_ranges, ARRAY_SIZE(__gen11_fw_ranges), true },
 		{ __gen12_fw_ranges, ARRAY_SIZE(__gen12_fw_ranges), true },
+		{ __xehp_fw_ranges, ARRAY_SIZE(__xehp_fw_ranges), true },
 	};
 	int err, i;
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 9/50
#19 lore raw

Re: [Intel-gfx] [PATCH v2 09/50] drm/i915/xehp: Xe_HP forcewake support

Quoted 8 lines · Matt Roper

Implement Xe_HP forcewake handling. While we're at it, let's reorder to the forcewake assignment if/else ladder to match our usual driver conventions.

Quoted 512 lines
---
 .../drm/i915/gt/intel_execlists_submission.c  |   4 +
 drivers/gpu/drm/i915/intel_uncore.c           | 336 +++++++++++++++---
 drivers/gpu/drm/i915/intel_uncore.h           |  14 +-
 drivers/gpu/drm/i915/selftests/intel_uncore.c |   2 +
 4 files changed, 302 insertions(+), 54 deletions(-)
drivers/gpu/drm/i915/gt/intel_execlists_submission.c +4 -0
index 56e25090da67..cf1ac0010056 100644
@@ -3306,6 +3306,10 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 			i915_mmio_reg_offset(RING_EXECLIST_SQ_CONTENTS(base));
 		execlists->ctrl_reg = uncore->regs +
 			i915_mmio_reg_offset(RING_EXECLIST_CONTROL(base));
+
+		engine->fw_domain = intel_uncore_forcewake_for_reg(engine->uncore,
+				    RING_EXECLIST_CONTROL(engine->mmio_base),
+				    FW_REG_WRITE);
 	} else {
 		execlists->submit_reg = uncore->regs +
 			i915_mmio_reg_offset(RING_ELSP(base));
drivers/gpu/drm/i915/intel_uncore.c +283 -53
index ee1c6fbc3d97..8cf53f54559d 100644
@@ -24,6 +24,8 @@
 #include <linux/pm_runtime.h>
 #include <asm/iosf_mbi.h>
 
+#include "gt/intel_lrc_reg.h" /* for shadow reg list */
+
 #include "i915_drv.h"
 #include "i915_trace.h"
 #include "i915_vgpu.h"
@@ -68,8 +70,14 @@ static const char * const forcewake_domain_names[] = {
 	"vdbox1",
 	"vdbox2",
 	"vdbox3",
+	"vdbox4",
+	"vdbox5",
+	"vdbox6",
+	"vdbox7",
 	"vebox0",
 	"vebox1",
+	"vebox2",
+	"vebox3",
 };
 
 const char *
@@ -952,30 +960,80 @@ static const i915_reg_t gen8_shadowed_regs[] = {
 };
 
 static const i915_reg_t gen11_shadowed_regs[] = {
-	RING_TAIL(RENDER_RING_BASE),		/* 0x2000 (base) */
-	GEN6_RPNSWREQ,				/* 0xA008 */
-	GEN6_RC_VIDEO_FREQ,			/* 0xA00C */
-	RING_TAIL(BLT_RING_BASE),		/* 0x22000 (base) */
-	RING_TAIL(GEN11_BSD_RING_BASE),		/* 0x1C0000 (base) */
-	RING_TAIL(GEN11_BSD2_RING_BASE),	/* 0x1C4000 (base) */
-	RING_TAIL(GEN11_VEBOX_RING_BASE),	/* 0x1C8000 (base) */
-	RING_TAIL(GEN11_BSD3_RING_BASE),	/* 0x1D0000 (base) */
-	RING_TAIL(GEN11_BSD4_RING_BASE),	/* 0x1D4000 (base) */
-	RING_TAIL(GEN11_VEBOX2_RING_BASE),	/* 0x1D8000 (base) */
+	RING_TAIL(RENDER_RING_BASE),			/* 0x2000 (base) */
+	RING_EXECLIST_CONTROL(RENDER_RING_BASE),        /* 0x2550 */
+	GEN6_RPNSWREQ,					/* 0xA008 */
+	GEN6_RC_VIDEO_FREQ,				/* 0xA00C */
+	RING_TAIL(BLT_RING_BASE),			/* 0x22000 (base) */
+	RING_EXECLIST_CONTROL(BLT_RING_BASE),		/* 0x22550 */
+	RING_TAIL(GEN11_BSD_RING_BASE),			/* 0x1C0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD_RING_BASE),	/* 0x1C0550 */
+	RING_TAIL(GEN11_BSD2_RING_BASE),		/* 0x1C4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD2_RING_BASE),	/* 0x1C4550 */
+	RING_TAIL(GEN11_VEBOX_RING_BASE),		/* 0x1C8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX_RING_BASE),	/* 0x1C8550 */
+	RING_TAIL(GEN11_BSD3_RING_BASE),		/* 0x1D0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD3_RING_BASE),	/* 0x1D0550 */
+	RING_TAIL(GEN11_BSD4_RING_BASE),		/* 0x1D4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD4_RING_BASE),	/* 0x1D4550 */
+	RING_TAIL(GEN11_VEBOX2_RING_BASE),		/* 0x1D8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX2_RING_BASE),	/* 0x1D8550 */
 	/* TODO: Other registers are not yet used */
 };
 
 static const i915_reg_t gen12_shadowed_regs[] = {
-	RING_TAIL(RENDER_RING_BASE),		/* 0x2000 (base) */
-	GEN6_RPNSWREQ,				/* 0xA008 */
-	GEN6_RC_VIDEO_FREQ,			/* 0xA00C */
-	RING_TAIL(BLT_RING_BASE),		/* 0x22000 (base) */
-	RING_TAIL(GEN11_BSD_RING_BASE),		/* 0x1C0000 (base) */
-	RING_TAIL(GEN11_BSD2_RING_BASE),	/* 0x1C4000 (base) */
-	RING_TAIL(GEN11_VEBOX_RING_BASE),	/* 0x1C8000 (base) */
-	RING_TAIL(GEN11_BSD3_RING_BASE),	/* 0x1D0000 (base) */
-	RING_TAIL(GEN11_BSD4_RING_BASE),	/* 0x1D4000 (base) */
-	RING_TAIL(GEN11_VEBOX2_RING_BASE),	/* 0x1D8000 (base) */
+	RING_TAIL(RENDER_RING_BASE),			/* 0x2000 (base) */
+	RING_EXECLIST_CONTROL(RENDER_RING_BASE),	/* 0x2550 */
+	GEN6_RPNSWREQ,					/* 0xA008 */
+	GEN6_RC_VIDEO_FREQ,				/* 0xA00C */
+	RING_TAIL(BLT_RING_BASE),			/* 0x22000 (base) */
+	RING_EXECLIST_CONTROL(BLT_RING_BASE),		/* 0x22550 */
+	RING_TAIL(GEN11_BSD_RING_BASE),			/* 0x1C0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD_RING_BASE),	/* 0x1C0550 */
+	RING_TAIL(GEN11_BSD2_RING_BASE),		/* 0x1C4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD2_RING_BASE),	/* 0x1C4550 */
+	RING_TAIL(GEN11_VEBOX_RING_BASE),		/* 0x1C8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX_RING_BASE),	/* 0x1C8550 */
+	RING_TAIL(GEN11_BSD3_RING_BASE),		/* 0x1D0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD3_RING_BASE),	/* 0x1D0550 */
+	RING_TAIL(GEN11_BSD4_RING_BASE),		/* 0x1D4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD4_RING_BASE),	/* 0x1D4550 */
+	RING_TAIL(GEN11_VEBOX2_RING_BASE),		/* 0x1D8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX2_RING_BASE),	/* 0x1D8550 */
+	/* TODO: Other registers are not yet used */
+};
+
+static const i915_reg_t xehp_shadowed_regs[] = {
+	RING_TAIL(RENDER_RING_BASE),			/* 0x2000 (base) */
+	RING_EXECLIST_CONTROL(RENDER_RING_BASE),        /* 0x2550 */
+	GEN6_RPNSWREQ,					/* 0xA008 */
+	GEN6_RC_VIDEO_FREQ,				/* 0xA00C */
+	RING_TAIL(BLT_RING_BASE),			/* 0x22000 (base) */
+	RING_EXECLIST_CONTROL(BLT_RING_BASE),		/* 0x22550 */
+	RING_TAIL(GEN11_BSD_RING_BASE),			/* 0x1C0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD_RING_BASE),	/* 0x1C0550 */
+	RING_TAIL(GEN11_BSD2_RING_BASE),		/* 0x1C4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD2_RING_BASE),	/* 0x1C4550 */
+	RING_TAIL(GEN11_VEBOX_RING_BASE),		/* 0x1C8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX_RING_BASE),	/* 0x1C8550 */
+	RING_TAIL(GEN11_BSD3_RING_BASE),		/* 0x1D0000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD3_RING_BASE),	/* 0x1D0550 */
+	RING_TAIL(GEN11_BSD4_RING_BASE),		/* 0x1D4000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_BSD4_RING_BASE),	/* 0x1D4550 */
+	RING_TAIL(GEN11_VEBOX2_RING_BASE),		/* 0x1D8000 (base) */
+	RING_EXECLIST_CONTROL(GEN11_VEBOX2_RING_BASE),	/* 0x1D8550 */
+	RING_TAIL(XEHP_BSD5_RING_BASE),			/* 0x1E0000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_BSD5_RING_BASE),	/* 0x1E0550 */
+	RING_TAIL(XEHP_BSD6_RING_BASE),			/* 0x1E4000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_BSD6_RING_BASE),	/* 0x1E4550 */
+	RING_TAIL(XEHP_VEBOX3_RING_BASE),		/* 0x1E8000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_VEBOX3_RING_BASE),	/* 0x1E8550 */
+	RING_TAIL(XEHP_BSD7_RING_BASE),			/* 0x1F0000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_BSD7_RING_BASE),	/* 0x1F0550 */
+	RING_TAIL(XEHP_BSD8_RING_BASE),			/* 0x1F4000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_BSD8_RING_BASE),	/* 0x1F4550 */
+	RING_TAIL(XEHP_VEBOX4_RING_BASE),		/* 0x1F8000 (base) */
+	RING_EXECLIST_CONTROL(XEHP_VEBOX4_RING_BASE),	/* 0x1F8550 */
 	/* TODO: Other registers are not yet used */
 };
 
@@ -991,17 +1049,18 @@ static int mmio_reg_cmp(u32 key, const i915_reg_t *reg)
 		return 0;
 }
 
-#define __is_genX_shadowed(x) \
-static bool is_gen##x##_shadowed(u32 offset) \
+#define __is_X_shadowed(x) \
+static bool is_##x##_shadowed(u32 offset) \
 { \
-	const i915_reg_t *regs = gen##x##_shadowed_regs; \
-	return BSEARCH(offset, regs, ARRAY_SIZE(gen##x##_shadowed_regs), \
+	const i915_reg_t *regs = x##_shadowed_regs; \
+	return BSEARCH(offset, regs, ARRAY_SIZE(x##_shadowed_regs), \
 		       mmio_reg_cmp); \
 }
 
-__is_genX_shadowed(8)
-__is_genX_shadowed(11)
-__is_genX_shadowed(12)
+__is_X_shadowed(gen8)
+__is_X_shadowed(gen11)
+__is_X_shadowed(gen12)
+__is_X_shadowed(xehp)
 
 static enum forcewake_domains
 gen6_reg_write_fw_domains(struct intel_uncore *uncore, i915_reg_t reg)
@@ -1065,6 +1124,15 @@ static const struct intel_forcewake_range __chv_fw_ranges[] = {
 	__fwd; \
 })
 
+#define __xehp_fwtable_reg_write_fw_domains(uncore, offset) \
+({ \
+	enum forcewake_domains __fwd = 0; \
+	const u32 __offset = (offset); \
+	if (!is_xehp_shadowed(__offset)) \
+		__fwd = find_fw_domain(uncore, __offset); \
+	__fwd; \
+})
+
 /* *Must* be sorted by offset ranges! See intel_fw_table_check(). */
 static const struct intel_forcewake_range __gen9_fw_ranges[] = {
 	GEN_FW_RANGE(0x0, 0xaff, FORCEWAKE_GT),
@@ -1249,6 +1317,145 @@ static const struct intel_forcewake_range __gen12_fw_ranges[] = {
 		0x1d3f00 - 0x1d3fff: VD2 */
 };
 
+/* *Must* be sorted by offset ranges! See intel_fw_table_check(). */
+static const struct intel_forcewake_range __xehp_fw_ranges[] = {
+	GEN_FW_RANGE(0x0, 0x1fff, 0), /*
+		  0x0 -  0xaff: reserved
+		0xb00 - 0x1fff: always on */
+	GEN_FW_RANGE(0x2000, 0x26ff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x2700, 0x4aff, FORCEWAKE_GT),
+	GEN_FW_RANGE(0x4b00, 0x51ff, 0), /*
+		0x4b00 - 0x4fff: reserved
+		0x5000 - 0x51ff: always on */
+	GEN_FW_RANGE(0x5200, 0x7fff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x8000, 0x813f, FORCEWAKE_GT),
+	GEN_FW_RANGE(0x8140, 0x815f, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x8160, 0x81ff, 0), /*
+		0x8160 - 0x817f: reserved
+		0x8180 - 0x81ff: always on */
+	GEN_FW_RANGE(0x8200, 0x82ff, FORCEWAKE_GT),
+	GEN_FW_RANGE(0x8300, 0x84ff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x8500, 0x94cf, FORCEWAKE_GT), /*
+		0x8500 - 0x87ff: gt
+		0x8800 - 0x8fff: reserved
+		0x9000 - 0x947f: gt
+		0x9480 - 0x94cf: reserved */
+	GEN_FW_RANGE(0x94d0, 0x955f, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0x9560, 0x97ff, 0), /*
+		0x9560 - 0x95ff: always on
+		0x9600 - 0x97ff: reserved */
+	GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /*
+		0x9800 - 0xb4ff: gt
+		0xb500 - 0xbfff: reserved
+		0xc000 - 0xcfff: gt */
+	GEN_FW_RANGE(0xd000, 0xd7ff, 0),
+	GEN_FW_RANGE(0xd800, 0xdbff, FORCEWAKE_GT),
+	GEN_FW_RANGE(0xdc00, 0xdcff, FORCEWAKE_RENDER),
+	GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /*
+		0xdd00 - 0xddff: gt
+		0xde00 - 0xde7f: reserved */
+	GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /*
+		0xde80 - 0xdfff: render
+		0xe000 - 0xe0ff: reserved
+		0xe100 - 0xe8ff: render */
+	GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /*
+		0xe900 - 0xe9ff: gt
+		0xea00 - 0xefff: reserved
+		0xf000 - 0xffff: gt */
+	GEN_FW_RANGE(0x10000, 0x13fff, 0), /*
+		0x10000 - 0x11fff: reserved
+		0x12000 - 0x127ff: always on
+		0x12800 - 0x13fff: reserved */
+	GEN_FW_RANGE(0x14000, 0x141ff, FORCEWAKE_MEDIA_VDBOX0),
+	GEN_FW_RANGE(0x14200, 0x143ff, FORCEWAKE_MEDIA_VDBOX2),
+	GEN_FW_RANGE(0x14400, 0x145ff, FORCEWAKE_MEDIA_VDBOX4),
+	GEN_FW_RANGE(0x14600, 0x147ff, FORCEWAKE_MEDIA_VDBOX6),
+	GEN_FW_RANGE(0x14800, 0x1ffff, FORCEWAKE_RENDER), /*
+		0x14800 - 0x14fff: render
+		0x15000 - 0x16dff: reserved
+		0x16e00 - 0x1ffff: render */
+	GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /*
+		0x20000 - 0x20fff: VD0
+		0x21000 - 0x21fff: reserved */
+	GEN_FW_RANGE(0x22000, 0x23fff, FORCEWAKE_GT),
+	GEN_FW_RANGE(0x24000, 0x2417f, 0), /*
+		0x24000 - 0x2407f: always on
+		0x24080 - 0x2417f: reserved */
+	GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /*
+		0x24180 - 0x241ff: gt
+		0x24200 - 0x249ff: reserved */
+	GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /*
+		0x24a00 - 0x24a7f: render
+		0x24a80 - 0x251ff: reserved */
+	GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /*
+		0x25200 - 0x252ff: gt
+		0x25300 - 0x25fff: reserved */
+	GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /*
+		0x26000 - 0x27fff: render
+		0x28000 - 0x29fff: reserved
+		0x2a000 - 0x2ffff: undocumented */
+	GEN_FW_RANGE(0x30000, 0x3ffff, FORCEWAKE_GT),
+	GEN_FW_RANGE(0x40000, 0x1bffff, 0),
+	GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /*
+		0x1c0000 - 0x1c2bff: VD0
+		0x1c2c00 - 0x1c2cff: reserved
+		0x1c2d00 - 0x1c2dff: VD0
+		0x1c2e00 - 0x1c3eff: reserved
+		0x1c3f00 - 0x1c3fff: VD0 */
+	GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /*
+		0x1c4000 - 0x1c6bff: VD1
+		0x1c6c00 - 0x1c6cff: reserved
+		0x1c6d00 - 0x1c6dff: VD1
+		0x1c6e00 - 0x1c7fff: reserved */
+	GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /*
+		0x1c8000 - 0x1ca0ff: VE0
+		0x1ca100 - 0x1cbfff: reserved */
+	GEN_FW_RANGE(0x1cc000, 0x1ccfff, FORCEWAKE_MEDIA_VDBOX0),
+	GEN_FW_RANGE(0x1cd000, 0x1cdfff, FORCEWAKE_MEDIA_VDBOX2),
+	GEN_FW_RANGE(0x1ce000, 0x1cefff, FORCEWAKE_MEDIA_VDBOX4),
+	GEN_FW_RANGE(0x1cf000, 0x1cffff, FORCEWAKE_MEDIA_VDBOX6),
+	GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /*
+		0x1d0000 - 0x1d2bff: VD2
+		0x1d2c00 - 0x1d2cff: reserved
+		0x1d2d00 - 0x1d2dff: VD2
+		0x1d2e00 - 0x1d3eff: reserved
+		0x1d3f00 - 0x1d3fff: VD2 */
+	GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /*
+		0x1d4000 - 0x1d6bff: VD3
+		0x1d6c00 - 0x1d6cff: reserved
+		0x1d6d00 - 0x1d6dff: VD3
+		0x1d6e00 - 0x1d7fff: reserved */
+	GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /*
+		0x1d8000 - 0x1da0ff: VE1
+		0x1da100 - 0x1dffff: reserved */
+	GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /*
+		0x1e0000 - 0x1e2bff: VD4
+		0x1e2c00 - 0x1e2cff: reserved
+		0x1e2d00 - 0x1e2dff: VD4
+		0x1e2e00 - 0x1e3eff: reserved
+		0x1e3f00 - 0x1e3fff: VD4 */
+	GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /*
+		0x1e4000 - 0x1e6bff: VD5
+		0x1e6c00 - 0x1e6cff: reserved
+		0x1e6d00 - 0x1e6dff: VD5
+		0x1e6e00 - 0x1e7fff: reserved */
+	GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /*
+		0x1e8000 - 0x1ea0ff: VE2
+		0x1ea100 - 0x1effff: reserved */
+	GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /*
+		0x1f0000 - 0x1f2bff: VD6
+		0x1f2c00 - 0x1f2cff: reserved
+		0x1f2d00 - 0x1f2dff: VD6
+		0x1f2e00 - 0x1f3eff: reserved
+		0x1f3f00 - 0x1f3fff: VD6 */
+	GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /*
+		0x1f4000 - 0x1f6bff: VD7
+		0x1f6c00 - 0x1f6cff: reserved
+		0x1f6d00 - 0x1f6dff: VD7
+		0x1f6e00 - 0x1f7fff: reserved */
+	GEN_FW_RANGE(0x1f8000, 0x1fa0ff, FORCEWAKE_MEDIA_VEBOX3),
+};
+
 static void
 ilk_dummy_write(struct intel_uncore *uncore)
 {
@@ -1502,6 +1709,7 @@ __gen_write(func, 8) \
 __gen_write(func, 16) \
 __gen_write(func, 32)
 
+__gen_reg_write_funcs(xehp_fwtable);
 __gen_reg_write_funcs(gen12_fwtable);
 __gen_reg_write_funcs(gen11_fwtable);
 __gen_reg_write_funcs(fwtable);
@@ -1582,8 +1790,14 @@ static int __fw_domain_init(struct intel_uncore *uncore,
 	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX1 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX1));
 	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX2 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX2));
 	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX3 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX3));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX4 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX4));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX5 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX5));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX6 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX6));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VDBOX7 != (1 << FW_DOMAIN_ID_MEDIA_VDBOX7));
 	BUILD_BUG_ON(FORCEWAKE_MEDIA_VEBOX0 != (1 << FW_DOMAIN_ID_MEDIA_VEBOX0));
 	BUILD_BUG_ON(FORCEWAKE_MEDIA_VEBOX1 != (1 << FW_DOMAIN_ID_MEDIA_VEBOX1));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VEBOX2 != (1 << FW_DOMAIN_ID_MEDIA_VEBOX2));
+	BUILD_BUG_ON(FORCEWAKE_MEDIA_VEBOX3 != (1 << FW_DOMAIN_ID_MEDIA_VEBOX3));
 
 	d->mask = BIT(domain_id);
 
@@ -1870,36 +2084,36 @@ static int uncore_forcewake_init(struct intel_uncore *uncore)
 		return ret;
 	forcewake_early_sanitize(uncore, 0);
 
-	if (IS_GRAPHICS_VER(i915, 6, 7)) {
-		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen6);
-
-		if (IS_VALLEYVIEW(i915)) {
-			ASSIGN_FW_DOMAINS_TABLE(uncore, __vlv_fw_ranges);
-			ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
-		} else {
-			ASSIGN_READ_MMIO_VFUNCS(uncore, gen6);
-		}
-	} else if (GRAPHICS_VER(i915) == 8) {
-		if (IS_CHERRYVIEW(i915)) {
-			ASSIGN_FW_DOMAINS_TABLE(uncore, __chv_fw_ranges);
-			ASSIGN_WRITE_MMIO_VFUNCS(uncore, fwtable);
-			ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
-		} else {
-			ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen8);
-			ASSIGN_READ_MMIO_VFUNCS(uncore, gen6);
-		}
-	} else if (IS_GRAPHICS_VER(i915, 9, 10)) {
-		ASSIGN_FW_DOMAINS_TABLE(uncore, __gen9_fw_ranges);
-		ASSIGN_WRITE_MMIO_VFUNCS(uncore, fwtable);
-		ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
-	} else if (GRAPHICS_VER(i915) == 11) {
-		ASSIGN_FW_DOMAINS_TABLE(uncore, __gen11_fw_ranges);
-		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen11_fwtable);
+	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50)) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __xehp_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, xehp_fwtable);
 		ASSIGN_READ_MMIO_VFUNCS(uncore, gen11_fwtable);
-	} else {
+	} else if (GRAPHICS_VER(i915) >= 12) {
 		ASSIGN_FW_DOMAINS_TABLE(uncore, __gen12_fw_ranges);
 		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen12_fwtable);
 		ASSIGN_READ_MMIO_VFUNCS(uncore, gen12_fwtable);
+	} else if (GRAPHICS_VER(i915) == 11) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __gen11_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen11_fwtable);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, gen11_fwtable);
+	} else if (IS_GRAPHICS_VER(i915, 9, 10)) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __gen9_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, fwtable);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
+	} else if (IS_CHERRYVIEW(i915)) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __chv_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, fwtable);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
+	} else if (GRAPHICS_VER(i915) == 8) {
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen8);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, gen6);
+	} else if (IS_VALLEYVIEW(i915)) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __vlv_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen6);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, fwtable);
+	} else if (IS_GRAPHICS_VER(i915, 6, 7)) {
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, gen6);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, gen6);
 	}
 
 	uncore->pmic_bus_access_nb.notifier_call = i915_pmic_bus_access_notifier;
@@ -1988,6 +2202,22 @@ void intel_uncore_prune_engine_fw_domains(struct intel_uncore *uncore,
 		if (HAS_ENGINE(gt, _VCS(i)))
 			continue;
 
+		/*
+		 * Starting with XeHP, the power well for an even-numbered
+		 * VDBOX is also used for shared units within the
+		 * media slice such as SFC.  So even if the engine
+		 * itself is fused off, we still need to initialize
+		 * the forcewake domain if any of the other engines
+		 * in the same media slice are present.
+		 */
+		if (GRAPHICS_VER_FULL(uncore->i915) >= IP_VER(12, 50) && i % 2 == 0) {
+			if ((i + 1 < I915_MAX_VCS) && HAS_ENGINE(gt, _VCS(i + 1)))
+				continue;
+
+			if (HAS_ENGINE(gt, _VECS(i / 2)))
+				continue;
+		}
+
 		if (fw_domains & BIT(domain_id))
 			fw_domain_fini(uncore, domain_id);
 	}
drivers/gpu/drm/i915/intel_uncore.h +13 -1
index a18bdb57af7b..3c0b0a8b5250 100644
@@ -52,8 +52,14 @@ enum forcewake_domain_id {
 	FW_DOMAIN_ID_MEDIA_VDBOX1,
 	FW_DOMAIN_ID_MEDIA_VDBOX2,
 	FW_DOMAIN_ID_MEDIA_VDBOX3,
+	FW_DOMAIN_ID_MEDIA_VDBOX4,
+	FW_DOMAIN_ID_MEDIA_VDBOX5,
+	FW_DOMAIN_ID_MEDIA_VDBOX6,
+	FW_DOMAIN_ID_MEDIA_VDBOX7,
 	FW_DOMAIN_ID_MEDIA_VEBOX0,
 	FW_DOMAIN_ID_MEDIA_VEBOX1,
+	FW_DOMAIN_ID_MEDIA_VEBOX2,
+	FW_DOMAIN_ID_MEDIA_VEBOX3,
 
 	FW_DOMAIN_ID_COUNT
 };
@@ -66,10 +72,16 @@ enum forcewake_domains {
 	FORCEWAKE_MEDIA_VDBOX1	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX1),
 	FORCEWAKE_MEDIA_VDBOX2	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX2),
 	FORCEWAKE_MEDIA_VDBOX3	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX3),
+	FORCEWAKE_MEDIA_VDBOX4	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX4),
+	FORCEWAKE_MEDIA_VDBOX5	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX5),
+	FORCEWAKE_MEDIA_VDBOX6	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX6),
+	FORCEWAKE_MEDIA_VDBOX7	= BIT(FW_DOMAIN_ID_MEDIA_VDBOX7),
 	FORCEWAKE_MEDIA_VEBOX0	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX0),
 	FORCEWAKE_MEDIA_VEBOX1	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX1),
+	FORCEWAKE_MEDIA_VEBOX2	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX2),
+	FORCEWAKE_MEDIA_VEBOX3	= BIT(FW_DOMAIN_ID_MEDIA_VEBOX3),
 
-	FORCEWAKE_ALL = BIT(FW_DOMAIN_ID_COUNT) - 1
+	FORCEWAKE_ALL = BIT(FW_DOMAIN_ID_COUNT) - 1,
 };
 
 struct intel_uncore_funcs {
drivers/gpu/drm/i915/selftests/intel_uncore.c +2 -0
index 8ef9e6a4ad05..720b60853f8b 100644
@@ -68,6 +68,7 @@ static int intel_shadow_table_check(void)
 		{ gen8_shadowed_regs, ARRAY_SIZE(gen8_shadowed_regs) },
 		{ gen11_shadowed_regs, ARRAY_SIZE(gen11_shadowed_regs) },
 		{ gen12_shadowed_regs, ARRAY_SIZE(gen12_shadowed_regs) },
+		{ xehp_shadowed_regs, ARRAY_SIZE(xehp_shadowed_regs) },
 	};
 	const i915_reg_t *reg;
 	unsigned int i, j;
@@ -103,6 +104,7 @@ int intel_uncore_mock_selftests(void)
 		{ __gen9_fw_ranges, ARRAY_SIZE(__gen9_fw_ranges), true },
 		{ __gen11_fw_ranges, ARRAY_SIZE(__gen11_fw_ranges), true },
 		{ __gen12_fw_ranges, ARRAY_SIZE(__gen12_fw_ranges), true },
+		{ __xehp_fw_ranges, ARRAY_SIZE(__xehp_fw_ranges), true },
 	};
 	int err, i;
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#20 lore raw

PATCH v2 10/50 drm/i915/xehp: Define multicast register ranges

In reply to Matt Roper

Since we can't steer multicast register reads during ring-based workaround verification, we need to define the multicast ranges where failure to steer could potentially cause us to read back from a fused-off register instance.

As with gen12, we can ignore the multicast ranges that the bspec describes as 'SQIDI' since all instances of those registers will always be present and we'll always be able to read back a workaround value that was written with multicast.

Bspec: 66534

Cc José Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +19 -1
index 72562c233ad2..3abe424ef9c9 100644
@@ -2097,12 +2097,30 @@ static const struct mcr_range mcr_ranges_gen12[] = {
 	{},
 };
 
+static const struct mcr_range mcr_ranges_xehp[] = {
+	{ .start =  0x4000, .end =  0x4aff },
+	{ .start =  0x5200, .end =  0x52ff },
+	{ .start =  0x5400, .end =  0x7fff },
+	{ .start =  0x8140, .end =  0x815f },
+	{ .start =  0x8c80, .end =  0x8dff },
+	{ .start =  0x94d0, .end =  0x955f },
+	{ .start =  0x9680, .end =  0x96ff },
+	{ .start =  0xb000, .end =  0xb3ff },
+	{ .start =  0xc800, .end =  0xcfff },
+	{ .start =  0xd800, .end =  0xd8ff },
+	{ .start =  0xdc00, .end =  0xffff },
+	{ .start = 0x17000, .end = 0x17fff },
+	{ .start = 0x24a00, .end = 0x24a7f },
+};
+
 static bool mcr_range(struct drm_i915_private *i915, u32 offset)
 {
 	const struct mcr_range *mcr_ranges;
 	int i;
 
-	if (GRAPHICS_VER(i915) >= 12)
+	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50))
+		mcr_ranges = mcr_ranges_xehp;
+	else if (GRAPHICS_VER(i915) >= 12)
 		mcr_ranges = mcr_ranges_gen12;
 	else if (GRAPHICS_VER(i915) >= 8)
 		mcr_ranges = mcr_ranges_gen8;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 10/50
#21 lore raw

Re: [Intel-gfx] [PATCH v2 10/50] drm/i915/xehp: Define multicast register ranges

Quoted 10 lines · Matt Roper

Since we can't steer multicast register reads during ring-based workaround verification, we need to define the multicast ranges where failure to steer could potentially cause us to read back from a fused-off register instance.

As with gen12, we can ignore the multicast ranges that the bspec describes as 'SQIDI' since all instances of those registers will always be present and we'll always be able to read back a workaround value that was written with multicast.

Quoted 33 lines

Bspec: 66534

Cc José Roberto de Souza <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +16 -0
index 72562c233ad2..3abe424ef9c9 100644
@@ -2097,12 +2097,30 @@ static const struct mcr_range mcr_ranges_gen12[] = {
 	{},
 };
 
+static const struct mcr_range mcr_ranges_xehp[] = {
+	{ .start =  0x4000, .end =  0x4aff },
+	{ .start =  0x5200, .end =  0x52ff },
+	{ .start =  0x5400, .end =  0x7fff },
+	{ .start =  0x8140, .end =  0x815f },
+	{ .start =  0x8c80, .end =  0x8dff },
+	{ .start =  0x94d0, .end =  0x955f },
+	{ .start =  0x9680, .end =  0x96ff },
+	{ .start =  0xb000, .end =  0xb3ff },
+	{ .start =  0xc800, .end =  0xcfff },
+	{ .start =  0xd800, .end =  0xd8ff },
+	{ .start =  0xdc00, .end =  0xffff },
+	{ .start = 0x17000, .end = 0x17fff },
+	{ .start = 0x24a00, .end = 0x24a7f },
+};
+
 static bool mcr_range(struct drm_i915_private *i915, u32 offset)
 {

drivers/gpu/drm/i915/gt/intel_workarounds.c static const struct mcr_range mcr_ranges_gen12[] = { · line 2126

Quoted 10 lines
drivers/gpu/drm/i915/gt/intel_workarounds.c +3 -1
 	const struct mcr_range *mcr_ranges;
 	int i;
 
-	if (GRAPHICS_VER(i915) >= 12)
+	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50))
+		mcr_ranges = mcr_ranges_xehp;
+	else if (GRAPHICS_VER(i915) >= 12)
 		mcr_ranges = mcr_ranges_gen12;
 	else if (GRAPHICS_VER(i915) >= 8)
 		mcr_ranges = mcr_ranges_gen8;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#22 lore raw

PATCH v2 11/50 drm/i915/xehp: Handle new device context ID format

In reply to Matt Roper

From: Stuart Summers <[email protected]>

Xe_HP changes the format of the context ID from past platforms.

---
 .../drm/i915/gt/intel_execlists_submission.c  | 74 ++++++++++++++++---
 drivers/gpu/drm/i915/gt/intel_lrc.c           |  8 ++
 drivers/gpu/drm/i915/gt/intel_lrc_reg.h       |  2 +
 drivers/gpu/drm/i915/i915_perf.c              | 29 +++++---
 drivers/gpu/drm/i915/i915_reg.h               |  5 ++
 5 files changed, 97 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/gt/intel_execlists_submission.c +63 -11
index cf1ac0010056..be99a74e6e09 100644
@@ -153,6 +153,12 @@
 #define GEN12_CSB_CTX_VALID(csb_dw) \
 	(FIELD_GET(GEN12_CSB_SW_CTX_ID_MASK, csb_dw) != GEN12_IDLE_CTX_ID)
 
+#define XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE	BIT(1) /* upper csb dword */
+#define XEHP_CSB_SW_CTX_ID_MASK			GENMASK(31, 10)
+#define XEHP_IDLE_CTX_ID			0xFFFF
+#define XEHP_CSB_CTX_VALID(csb_dw) \
+	(FIELD_GET(XEHP_CSB_SW_CTX_ID_MASK, csb_dw) != XEHP_IDLE_CTX_ID)
+
 /* Typical size of the average request (2 pipecontrols and a MI_BB) */
 #define EXECLISTS_REQUEST_SIZE 64 /* bytes */
 
@@ -478,6 +484,16 @@ __execlists_schedule_in(struct i915_request *rq)
 		/* Use a fixed tag for OA and friends */
 		GEM_BUG_ON(ce->tag <= BITS_PER_LONG);
 		ce->lrc.ccid = ce->tag;
+	} else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50)) {
+		/* We don't need a strict matching tag, just different values */
+		unsigned int tag = ffs(READ_ONCE(engine->context_tag));
+
+		GEM_BUG_ON(tag == 0 || tag >= BITS_PER_LONG);
+		clear_bit(tag - 1, &engine->context_tag);
+		ce->lrc.ccid = tag << (XEHP_SW_CTX_ID_SHIFT - 32);
+
+		BUILD_BUG_ON(BITS_PER_LONG > GEN12_MAX_CONTEXT_HW_ID);
+
 	} else {
 		/* We don't need a strict matching tag, just different values */
 		unsigned int tag = __ffs(engine->context_tag);
@@ -588,8 +604,14 @@ static void __execlists_schedule_out(struct i915_request * const rq,
 		intel_engine_add_retire(engine, ce->timeline);
 
 	ccid = ce->lrc.ccid;
-	ccid >>= GEN11_SW_CTX_ID_SHIFT - 32;
-	ccid &= GEN12_MAX_CONTEXT_HW_ID;
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50)) {
+		ccid >>= XEHP_SW_CTX_ID_SHIFT - 32;
+		ccid &= XEHP_MAX_CONTEXT_HW_ID;
+	} else {
+		ccid >>= GEN11_SW_CTX_ID_SHIFT - 32;
+		ccid &= GEN12_MAX_CONTEXT_HW_ID;
+	}
+
 	if (ccid < BITS_PER_LONG) {
 		GEM_BUG_ON(ccid == 0);
 		GEM_BUG_ON(test_bit(ccid - 1, &engine->context_tag));
@@ -1648,13 +1670,24 @@ static void invalidate_csb_entries(const u64 *first, const u64 *last)
  *     bits 44-46: reserved
  *     bits 47-57: sw context id of the lrc the GT switched away from
  *     bits 58-63: sw counter of the lrc the GT switched away from
+ *
+ * Xe_HP csb shuffles things around compared to TGL:
+ *
+ *     bits 0-3:   context switch detail (same possible values as TGL)
+ *     bits 4-9:   engine instance
+ *     bits 10-25: sw context id of the lrc the GT switched to
+ *     bits 26-31: sw counter of the lrc the GT switched to
+ *     bit  32:    semaphore wait mode (poll or signal), Only valid when
+ *                 switch detail is set to "wait on semaphore"
+ *     bit  33:    switched to new queue
+ *     bits 34-41: wait detail (for switch detail 1 to 4)
+ *     bits 42-57: sw context id of the lrc the GT switched away from
+ *     bits 58-63: sw counter of the lrc the GT switched away from
  */
-static bool gen12_csb_parse(const u64 csb)
+static inline bool
+__gen12_csb_parse(bool ctx_to_valid, bool ctx_away_valid, bool new_queue,
+		  u8 switch_detail)
 {
-	bool ctx_away_valid = GEN12_CSB_CTX_VALID(upper_32_bits(csb));
-	bool new_queue =
-		lower_32_bits(csb) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE;
-
 	/*
 	 * The context switch detail is not guaranteed to be 5 when a preemption
 	 * occurs, so we can't just check for that. The check below works for
@@ -1663,7 +1696,7 @@ static bool gen12_csb_parse(const u64 csb)
 	 * would require some extra handling, but we don't support that.
 	 */
 	if (!ctx_away_valid || new_queue) {
-		GEM_BUG_ON(!GEN12_CSB_CTX_VALID(lower_32_bits(csb)));
+		GEM_BUG_ON(!ctx_to_valid);
 		return true;
 	}
 
@@ -1672,10 +1705,26 @@ static bool gen12_csb_parse(const u64 csb)
 	 * context switch on an unsuccessful wait instruction since we always
 	 * use polling mode.
 	 */
-	GEM_BUG_ON(GEN12_CTX_SWITCH_DETAIL(upper_32_bits(csb)));
+	GEM_BUG_ON(switch_detail);
 	return false;
 }
 
+static bool xehp_csb_parse(const u64 csb)
+{
+	return __gen12_csb_parse(XEHP_CSB_CTX_VALID(lower_32_bits(csb)), /* cxt to */
+				 XEHP_CSB_CTX_VALID(upper_32_bits(csb)), /* cxt away */
+				 upper_32_bits(csb) & XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE,
+				 GEN12_CTX_SWITCH_DETAIL(lower_32_bits(csb)));
+}
+
+static bool gen12_csb_parse(const u64 csb)
+{
+	return __gen12_csb_parse(GEN12_CSB_CTX_VALID(lower_32_bits(csb)), /* cxt to */
+				 GEN12_CSB_CTX_VALID(upper_32_bits(csb)), /* cxt away */
+				 lower_32_bits(csb) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE,
+				 GEN12_CTX_SWITCH_DETAIL(upper_32_bits(csb)));
+}
+
 static bool gen8_csb_parse(const u64 csb)
 {
 	return csb & (GEN8_CTX_STATUS_IDLE_ACTIVE | GEN8_CTX_STATUS_PREEMPTED);
@@ -1840,7 +1889,9 @@ process_csb(struct intel_engine_cs *engine, struct i915_request **inactive)
 		ENGINE_TRACE(engine, "csb[%d]: status=0x%08x:0x%08x\n",
 			     head, upper_32_bits(csb), lower_32_bits(csb));
 
-		if (GRAPHICS_VER(engine->i915) >= 12)
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+			promote = xehp_csb_parse(csb);
+		else if (GRAPHICS_VER(engine->i915) >= 12)
 			promote = gen12_csb_parse(csb);
 		else
 			promote = gen8_csb_parse(csb);
@@ -3327,7 +3378,8 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 		execlists->csb_size = GEN11_CSB_ENTRIES;
 
 	engine->context_tag = GENMASK(BITS_PER_LONG - 2, 0);
-	if (GRAPHICS_VER(engine->i915) >= 11) {
+	if (GRAPHICS_VER(engine->i915) >= 11 &&
+	    GRAPHICS_VER_FULL(engine->i915) < IP_VER(12, 50)) {
 		execlists->ccid |= engine->instance << (GEN11_ENGINE_INSTANCE_SHIFT - 32);
 		execlists->ccid |= engine->class << (GEN11_ENGINE_CLASS_SHIFT - 32);
 	}
drivers/gpu/drm/i915/gt/intel_lrc.c +8 -0
index 8ada1afe3d22..7f8fe6726504 100644
@@ -1101,6 +1101,14 @@ setup_indirect_ctx_bb(const struct intel_context *ce,
  *      bits 55-60:    SW counter
  *      bits 61-63:    engine class
  *
+ * On Xe_HP, the upper dword of the descriptor has a new format:
+ *
+ *      bits 32-37:    virtual function number
+ *      bit 38:        mbz, reserved for use by hardware
+ *      bits 39-54:    SW context ID
+ *      bits 55-57:    reserved
+ *      bits 58-63:    SW counter
+ *
  * engine info, SW context ID and SW counter need to form a unique number
  * (Context ID) per lrc.
  */
drivers/gpu/drm/i915/gt/intel_lrc_reg.h +2 -0
index 41e5350a7a05..9548f4ade068 100644
@@ -91,5 +91,7 @@
 #define GEN11_MAX_CONTEXT_HW_ID	(1 << 11) /* exclusive */
 /* in Gen12 ID 0x7FF is reserved to indicate idle */
 #define GEN12_MAX_CONTEXT_HW_ID	(GEN11_MAX_CONTEXT_HW_ID - 1)
+/* in Xe_HP ID 0xFFFF is reserved to indicate "invalid context" */
+#define XEHP_MAX_CONTEXT_HW_ID	0xFFFF
 
 #endif /* _INTEL_LRC_REG_H_ */
drivers/gpu/drm/i915/i915_perf.c +19 -10
index b4ec114a4698..324ec3f35672 100644
@@ -1284,17 +1284,26 @@ static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
 		break;
 
 	case 11:
-	case 12: {
-		stream->specific_ctx_id_mask =
-			((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
-		/*
-		 * Pick an unused context id
-		 * 0 - BITS_PER_LONG are used by other contexts
-		 * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
-		 */
-		stream->specific_ctx_id = (GEN12_MAX_CONTEXT_HW_ID - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+	case 12:
+		if (GRAPHICS_VER_FULL(ce->engine->i915) >= IP_VER(12, 50)) {
+			stream->specific_ctx_id_mask =
+				((1U << XEHP_SW_CTX_ID_WIDTH) - 1) <<
+				(XEHP_SW_CTX_ID_SHIFT - 32);
+			stream->specific_ctx_id =
+				(XEHP_MAX_CONTEXT_HW_ID - 1) <<
+				(XEHP_SW_CTX_ID_SHIFT - 32);
+		} else {
+			stream->specific_ctx_id_mask =
+				((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+			/*
+			 * Pick an unused context id
+			 * 0 - BITS_PER_LONG are used by other contexts
+			 * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
+			 */
+			stream->specific_ctx_id =
+				(GEN12_MAX_CONTEXT_HW_ID - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+		}
 		break;
-	}
 
 	default:
 		MISSING_CASE(GRAPHICS_VER(ce->engine->i915));
drivers/gpu/drm/i915/i915_reg.h +5 -0
index 1eca88ac7057..60d780d17d5d 100644
@@ -4172,6 +4172,11 @@ enum {
 #define GEN11_ENGINE_INSTANCE_SHIFT 48
 #define GEN11_ENGINE_INSTANCE_WIDTH 6
 
+#define XEHP_SW_CTX_ID_SHIFT 39
+#define XEHP_SW_CTX_ID_WIDTH 16
+#define XEHP_SW_COUNTER_SHIFT 58
+#define XEHP_SW_COUNTER_WIDTH 6
+
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
 #define   CLK_CTL2_CZCOUNT_30NS_SHIFT	28
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 11/50
#23 lore raw

Re: [Intel-gfx] [PATCH v2 11/50] drm/i915/xehp: Handle new device context ID format

Quoted 7 lines · Matt Roper

From: Stuart Summers <[email protected]>

Xe_HP changes the format of the context ID from past platforms.

Quoted 242 lines
---
 .../drm/i915/gt/intel_execlists_submission.c  | 74 ++++++++++++++++---
 drivers/gpu/drm/i915/gt/intel_lrc.c           |  8 ++
 drivers/gpu/drm/i915/gt/intel_lrc_reg.h       |  2 +
 drivers/gpu/drm/i915/i915_perf.c              | 29 +++++---
 drivers/gpu/drm/i915/i915_reg.h               |  5 ++
 5 files changed, 97 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/gt/intel_execlists_submission.c +63 -11
index cf1ac0010056..be99a74e6e09 100644
@@ -153,6 +153,12 @@
 #define GEN12_CSB_CTX_VALID(csb_dw) \
 	(FIELD_GET(GEN12_CSB_SW_CTX_ID_MASK, csb_dw) != GEN12_IDLE_CTX_ID)
 
+#define XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE	BIT(1) /* upper csb dword */
+#define XEHP_CSB_SW_CTX_ID_MASK			GENMASK(31, 10)
+#define XEHP_IDLE_CTX_ID			0xFFFF
+#define XEHP_CSB_CTX_VALID(csb_dw) \
+	(FIELD_GET(XEHP_CSB_SW_CTX_ID_MASK, csb_dw) != XEHP_IDLE_CTX_ID)
+
 /* Typical size of the average request (2 pipecontrols and a MI_BB) */
 #define EXECLISTS_REQUEST_SIZE 64 /* bytes */
 
@@ -478,6 +484,16 @@ __execlists_schedule_in(struct i915_request *rq)
 		/* Use a fixed tag for OA and friends */
 		GEM_BUG_ON(ce->tag <= BITS_PER_LONG);
 		ce->lrc.ccid = ce->tag;
+	} else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50)) {
+		/* We don't need a strict matching tag, just different values */
+		unsigned int tag = ffs(READ_ONCE(engine->context_tag));
+
+		GEM_BUG_ON(tag == 0 || tag >= BITS_PER_LONG);
+		clear_bit(tag - 1, &engine->context_tag);
+		ce->lrc.ccid = tag << (XEHP_SW_CTX_ID_SHIFT - 32);
+
+		BUILD_BUG_ON(BITS_PER_LONG > GEN12_MAX_CONTEXT_HW_ID);
+
 	} else {
 		/* We don't need a strict matching tag, just different values */
 		unsigned int tag = __ffs(engine->context_tag);
@@ -588,8 +604,14 @@ static void __execlists_schedule_out(struct i915_request * const rq,
 		intel_engine_add_retire(engine, ce->timeline);
 
 	ccid = ce->lrc.ccid;
-	ccid >>= GEN11_SW_CTX_ID_SHIFT - 32;
-	ccid &= GEN12_MAX_CONTEXT_HW_ID;
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50)) {
+		ccid >>= XEHP_SW_CTX_ID_SHIFT - 32;
+		ccid &= XEHP_MAX_CONTEXT_HW_ID;
+	} else {
+		ccid >>= GEN11_SW_CTX_ID_SHIFT - 32;
+		ccid &= GEN12_MAX_CONTEXT_HW_ID;
+	}
+
 	if (ccid < BITS_PER_LONG) {
 		GEM_BUG_ON(ccid == 0);
 		GEM_BUG_ON(test_bit(ccid - 1, &engine->context_tag));
@@ -1648,13 +1670,24 @@ static void invalidate_csb_entries(const u64 *first, const u64 *last)
  *     bits 44-46: reserved
  *     bits 47-57: sw context id of the lrc the GT switched away from
  *     bits 58-63: sw counter of the lrc the GT switched away from
+ *
+ * Xe_HP csb shuffles things around compared to TGL:
+ *
+ *     bits 0-3:   context switch detail (same possible values as TGL)
+ *     bits 4-9:   engine instance
+ *     bits 10-25: sw context id of the lrc the GT switched to
+ *     bits 26-31: sw counter of the lrc the GT switched to
+ *     bit  32:    semaphore wait mode (poll or signal), Only valid when
+ *                 switch detail is set to "wait on semaphore"
+ *     bit  33:    switched to new queue
+ *     bits 34-41: wait detail (for switch detail 1 to 4)
+ *     bits 42-57: sw context id of the lrc the GT switched away from
+ *     bits 58-63: sw counter of the lrc the GT switched away from
  */
-static bool gen12_csb_parse(const u64 csb)
+static inline bool
+__gen12_csb_parse(bool ctx_to_valid, bool ctx_away_valid, bool new_queue,
+		  u8 switch_detail)
 {
-	bool ctx_away_valid = GEN12_CSB_CTX_VALID(upper_32_bits(csb));
-	bool new_queue =
-		lower_32_bits(csb) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE;
-
 	/*
 	 * The context switch detail is not guaranteed to be 5 when a preemption
 	 * occurs, so we can't just check for that. The check below works for
@@ -1663,7 +1696,7 @@ static bool gen12_csb_parse(const u64 csb)
 	 * would require some extra handling, but we don't support that.
 	 */
 	if (!ctx_away_valid || new_queue) {
-		GEM_BUG_ON(!GEN12_CSB_CTX_VALID(lower_32_bits(csb)));
+		GEM_BUG_ON(!ctx_to_valid);
 		return true;
 	}
 
@@ -1672,10 +1705,26 @@ static bool gen12_csb_parse(const u64 csb)
 	 * context switch on an unsuccessful wait instruction since we always
 	 * use polling mode.
 	 */
-	GEM_BUG_ON(GEN12_CTX_SWITCH_DETAIL(upper_32_bits(csb)));
+	GEM_BUG_ON(switch_detail);
 	return false;
 }
 
+static bool xehp_csb_parse(const u64 csb)
+{
+	return __gen12_csb_parse(XEHP_CSB_CTX_VALID(lower_32_bits(csb)), /* cxt to */
+				 XEHP_CSB_CTX_VALID(upper_32_bits(csb)), /* cxt away */
+				 upper_32_bits(csb) & XEHP_CTX_STATUS_SWITCHED_TO_NEW_QUEUE,
+				 GEN12_CTX_SWITCH_DETAIL(lower_32_bits(csb)));
+}
+
+static bool gen12_csb_parse(const u64 csb)
+{
+	return __gen12_csb_parse(GEN12_CSB_CTX_VALID(lower_32_bits(csb)), /* cxt to */
+				 GEN12_CSB_CTX_VALID(upper_32_bits(csb)), /* cxt away */
+				 lower_32_bits(csb) & GEN12_CTX_STATUS_SWITCHED_TO_NEW_QUEUE,
+				 GEN12_CTX_SWITCH_DETAIL(upper_32_bits(csb)));
+}
+
 static bool gen8_csb_parse(const u64 csb)
 {
 	return csb & (GEN8_CTX_STATUS_IDLE_ACTIVE | GEN8_CTX_STATUS_PREEMPTED);
@@ -1840,7 +1889,9 @@ process_csb(struct intel_engine_cs *engine, struct i915_request **inactive)
 		ENGINE_TRACE(engine, "csb[%d]: status=0x%08x:0x%08x\n",
 			     head, upper_32_bits(csb), lower_32_bits(csb));
 
-		if (GRAPHICS_VER(engine->i915) >= 12)
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+			promote = xehp_csb_parse(csb);
+		else if (GRAPHICS_VER(engine->i915) >= 12)
 			promote = gen12_csb_parse(csb);
 		else
 			promote = gen8_csb_parse(csb);
@@ -3327,7 +3378,8 @@ int intel_execlists_submission_setup(struct intel_engine_cs *engine)
 		execlists->csb_size = GEN11_CSB_ENTRIES;
 
 	engine->context_tag = GENMASK(BITS_PER_LONG - 2, 0);
-	if (GRAPHICS_VER(engine->i915) >= 11) {
+	if (GRAPHICS_VER(engine->i915) >= 11 &&
+	    GRAPHICS_VER_FULL(engine->i915) < IP_VER(12, 50)) {
 		execlists->ccid |= engine->instance << (GEN11_ENGINE_INSTANCE_SHIFT - 32);
 		execlists->ccid |= engine->class << (GEN11_ENGINE_CLASS_SHIFT - 32);
 	}
drivers/gpu/drm/i915/gt/intel_lrc.c +8 -0
index 8ada1afe3d22..7f8fe6726504 100644
@@ -1101,6 +1101,14 @@ setup_indirect_ctx_bb(const struct intel_context *ce,
  *      bits 55-60:    SW counter
  *      bits 61-63:    engine class
  *
+ * On Xe_HP, the upper dword of the descriptor has a new format:
+ *
+ *      bits 32-37:    virtual function number
+ *      bit 38:        mbz, reserved for use by hardware
+ *      bits 39-54:    SW context ID
+ *      bits 55-57:    reserved
+ *      bits 58-63:    SW counter
+ *
  * engine info, SW context ID and SW counter need to form a unique number
  * (Context ID) per lrc.
  */
drivers/gpu/drm/i915/gt/intel_lrc_reg.h +2 -0
index 41e5350a7a05..9548f4ade068 100644
@@ -91,5 +91,7 @@
 #define GEN11_MAX_CONTEXT_HW_ID	(1 << 11) /* exclusive */
 /* in Gen12 ID 0x7FF is reserved to indicate idle */
 #define GEN12_MAX_CONTEXT_HW_ID	(GEN11_MAX_CONTEXT_HW_ID - 1)
+/* in Xe_HP ID 0xFFFF is reserved to indicate "invalid context" */
+#define XEHP_MAX_CONTEXT_HW_ID	0xFFFF
 
 #endif /* _INTEL_LRC_REG_H_ */
drivers/gpu/drm/i915/i915_perf.c +19 -10
index b4ec114a4698..324ec3f35672 100644
@@ -1284,17 +1284,26 @@ static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
 		break;
 
 	case 11:
-	case 12: {
-		stream->specific_ctx_id_mask =
-			((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
-		/*
-		 * Pick an unused context id
-		 * 0 - BITS_PER_LONG are used by other contexts
-		 * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
-		 */
-		stream->specific_ctx_id = (GEN12_MAX_CONTEXT_HW_ID - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+	case 12:
+		if (GRAPHICS_VER_FULL(ce->engine->i915) >= IP_VER(12, 50)) {
+			stream->specific_ctx_id_mask =
+				((1U << XEHP_SW_CTX_ID_WIDTH) - 1) <<
+				(XEHP_SW_CTX_ID_SHIFT - 32);
+			stream->specific_ctx_id =
+				(XEHP_MAX_CONTEXT_HW_ID - 1) <<
+				(XEHP_SW_CTX_ID_SHIFT - 32);
+		} else {
+			stream->specific_ctx_id_mask =
+				((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+			/*
+			 * Pick an unused context id
+			 * 0 - BITS_PER_LONG are used by other contexts
+			 * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
+			 */
+			stream->specific_ctx_id =
+				(GEN12_MAX_CONTEXT_HW_ID - 1) << (GEN11_SW_CTX_ID_SHIFT - 32);
+		}
 		break;
-	}
 
 	default:
 		MISSING_CASE(GRAPHICS_VER(ce->engine->i915));
drivers/gpu/drm/i915/i915_reg.h +5 -0
index 1eca88ac7057..60d780d17d5d 100644
@@ -4172,6 +4172,11 @@ enum {
 #define GEN11_ENGINE_INSTANCE_SHIFT 48
 #define GEN11_ENGINE_INSTANCE_WIDTH 6
 
+#define XEHP_SW_CTX_ID_SHIFT 39
+#define XEHP_SW_CTX_ID_WIDTH 16
+#define XEHP_SW_COUNTER_SHIFT 58
+#define XEHP_SW_COUNTER_WIDTH 6
+
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
 #define   CLK_CTL2_CZCOUNT_30NS_SHIFT	28
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#24 lore raw

PATCH v2 12/50 drm/i915/xehp: New engine context offsets

In reply to Matt Roper

From: Prathap Kumar Valsan <[email protected]>

The layout of some engine contexts has changed on Xe_HP. Define the new offsets.

Bspec: 45585, 46256

---
 drivers/gpu/drm/i915/gt/intel_lrc.c | 65 ++++++++++++++++++++++++++---
 1 file changed, 59 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_lrc.c +59 -6
index 7f8fe6726504..c3f5bec8ae15 100644
@@ -484,6 +484,47 @@ static const u8 gen12_rcs_offsets[] = {
 	END
 };
 
+static const u8 xehp_rcs_offsets[] = {
+	NOP(1),
+	LRI(13, POSTED),
+	REG16(0x244),
+	REG(0x034),
+	REG(0x030),
+	REG(0x038),
+	REG(0x03c),
+	REG(0x168),
+	REG(0x140),
+	REG(0x110),
+	REG(0x1c0),
+	REG(0x1c4),
+	REG(0x1c8),
+	REG(0x180),
+	REG16(0x2b4),
+
+	NOP(5),
+	LRI(9, POSTED),
+	REG16(0x3a8),
+	REG16(0x28c),
+	REG16(0x288),
+	REG16(0x284),
+	REG16(0x280),
+	REG16(0x27c),
+	REG16(0x278),
+	REG16(0x274),
+	REG16(0x270),
+
+	LRI(3, POSTED),
+	REG(0x1b0),
+	REG16(0x5a8),
+	REG16(0x5ac),
+
+	NOP(6),
+	LRI(1, 0),
+	REG(0x0c8),
+
+	END
+};
+
 #undef END
 #undef REG16
 #undef REG
@@ -502,7 +543,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		   !intel_engine_has_relative_mmio(engine));
 
 	if (engine->class == RENDER_CLASS) {
-		if (GRAPHICS_VER(engine->i915) >= 12)
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+			return xehp_rcs_offsets;
+		else if (GRAPHICS_VER(engine->i915) >= 12)
 			return gen12_rcs_offsets;
 		else if (GRAPHICS_VER(engine->i915) >= 11)
 			return gen11_rcs_offsets;
@@ -522,7 +565,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 
 static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
 {
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		return 0x70;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0x60;
 	else if (GRAPHICS_VER(engine->i915) >= 9)
 		return 0x54;
@@ -534,7 +579,9 @@ static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
 
 static int lrc_ring_gpr0(const struct intel_engine_cs *engine)
 {
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		return 0x84;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0x74;
 	else if (GRAPHICS_VER(engine->i915) >= 9)
 		return 0x68;
@@ -578,10 +625,16 @@ static int lrc_ring_indirect_offset(const struct intel_engine_cs *engine)
 
 static int lrc_ring_cmd_buf_cctl(const struct intel_engine_cs *engine)
 {
-	if (engine->class != RENDER_CLASS)
-		return -1;
 
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		/*
+		 * Note that the CSFE context has a dummy slot for CMD_BUF_CCTL
+		 * simply to match the RCS context image layout.
+		 */
+		return 0xc6;
+	else if (engine->class != RENDER_CLASS)
+		return -1;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0xb6;
 	else if (GRAPHICS_VER(engine->i915) >= 11)
 		return 0xaa;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 12/50
#25 lore raw

Re: [Intel-gfx] [PATCH v2 12/50] drm/i915/xehp: New engine context offsets

Quoted 11 lines · Matt Roper

From: Prathap Kumar Valsan <[email protected]>

The layout of some engine contexts has changed on Xe_HP. Define the new offsets.

Bspec: 45585, 46256

Quoted 116 lines
---
 drivers/gpu/drm/i915/gt/intel_lrc.c | 65 ++++++++++++++++++++++++++---
 1 file changed, 59 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_lrc.c +59 -6
index 7f8fe6726504..c3f5bec8ae15 100644
@@ -484,6 +484,47 @@ static const u8 gen12_rcs_offsets[] = {
 	END
 };
 
+static const u8 xehp_rcs_offsets[] = {
+	NOP(1),
+	LRI(13, POSTED),
+	REG16(0x244),
+	REG(0x034),
+	REG(0x030),
+	REG(0x038),
+	REG(0x03c),
+	REG(0x168),
+	REG(0x140),
+	REG(0x110),
+	REG(0x1c0),
+	REG(0x1c4),
+	REG(0x1c8),
+	REG(0x180),
+	REG16(0x2b4),
+
+	NOP(5),
+	LRI(9, POSTED),
+	REG16(0x3a8),
+	REG16(0x28c),
+	REG16(0x288),
+	REG16(0x284),
+	REG16(0x280),
+	REG16(0x27c),
+	REG16(0x278),
+	REG16(0x274),
+	REG16(0x270),
+
+	LRI(3, POSTED),
+	REG(0x1b0),
+	REG16(0x5a8),
+	REG16(0x5ac),
+
+	NOP(6),
+	LRI(1, 0),
+	REG(0x0c8),
+
+	END
+};
+
 #undef END
 #undef REG16
 #undef REG
@@ -502,7 +543,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		   !intel_engine_has_relative_mmio(engine));
 
 	if (engine->class == RENDER_CLASS) {
-		if (GRAPHICS_VER(engine->i915) >= 12)
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+			return xehp_rcs_offsets;
+		else if (GRAPHICS_VER(engine->i915) >= 12)
 			return gen12_rcs_offsets;
 		else if (GRAPHICS_VER(engine->i915) >= 11)
 			return gen11_rcs_offsets;
@@ -522,7 +565,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 
 static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
 {
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		return 0x70;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0x60;
 	else if (GRAPHICS_VER(engine->i915) >= 9)
 		return 0x54;
@@ -534,7 +579,9 @@ static int lrc_ring_mi_mode(const struct intel_engine_cs *engine)
 
 static int lrc_ring_gpr0(const struct intel_engine_cs *engine)
 {
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		return 0x84;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0x74;
 	else if (GRAPHICS_VER(engine->i915) >= 9)
 		return 0x68;
@@ -578,10 +625,16 @@ static int lrc_ring_indirect_offset(const struct intel_engine_cs *engine)
 
 static int lrc_ring_cmd_buf_cctl(const struct intel_engine_cs *engine)
 {
-	if (engine->class != RENDER_CLASS)
-		return -1;
 
-	if (GRAPHICS_VER(engine->i915) >= 12)
+	if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		/*
+		 * Note that the CSFE context has a dummy slot for CMD_BUF_CCTL
+		 * simply to match the RCS context image layout.
+		 */
+		return 0xc6;
+	else if (engine->class != RENDER_CLASS)
+		return -1;
+	else if (GRAPHICS_VER(engine->i915) >= 12)
 		return 0xb6;
 	else if (GRAPHICS_VER(engine->i915) >= 11)
 		return 0xaa;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#26 lore raw

PATCH v2 13/50 drm/i915/xehp: handle new steering options

In reply to Matt Roper

From: Daniele Ceraolo Spurio <[email protected]>

Xe_HP is more modular then its predecessors and as a consequence it has more types of replicated registers. As with l3bank regions on previous platforms, we may need to explicitly re-steer accesses to these new types of ranges at runtime if we can't find a single default steering value that satisfies the fusing of all types.

Bspec: 66534

---
 drivers/gpu/drm/i915/gt/intel_gt.c          | 40 ++++++++-
 drivers/gpu/drm/i915/gt/intel_gt.h          |  1 +
 drivers/gpu/drm/i915/gt/intel_gt_types.h    |  7 ++
 drivers/gpu/drm/i915/gt/intel_region_lmem.c |  1 +
 drivers/gpu/drm/i915/gt/intel_sseu.c        | 18 +++++
 drivers/gpu/drm/i915/gt/intel_sseu.h        |  6 ++
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 89 +++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h             |  3 +
 drivers/gpu/drm/i915/i915_pci.c             |  1 +
 drivers/gpu/drm/i915/i915_reg.h             |  4 +
 drivers/gpu/drm/i915/intel_device_info.h    |  1 +
 11 files changed, 165 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_gt.c +39 -1
index e714e21c0a4d..f59bcedbb80b 100644
@@ -89,6 +89,13 @@ static const struct intel_mmio_range icl_l3bank_steering_table[] = {
 	{},
 };
 
+static u16 slicemask(struct intel_gt *gt, int count)
+{
+	u64 dss_mask = intel_sseu_get_subslices(&gt->info.sseu, 0);
+
+	return intel_slicemask_from_dssmask(dss_mask, count);
+}
+
 int intel_gt_init_mmio(struct intel_gt *gt)
 {
 	intel_gt_init_clock_frequency(gt);
@@ -96,11 +103,24 @@ int intel_gt_init_mmio(struct intel_gt *gt)
 	intel_uc_init_mmio(&gt->uc);
 	intel_sseu_info_init(gt);
 
-	if (GRAPHICS_VER(gt->i915) >= 11) {
+	/*
+	 * An mslice is unavailable only if both the meml3 for the slice is
+	 * disabled *and* all of the DSS in the slice (quadrant) are disabled.
+	 */
+	if (HAS_MSLICES(gt->i915))
+		gt->info.mslice_mask =
+			slicemask(gt, GEN_DSS_PER_MSLICE) |
+			(intel_uncore_read(gt->uncore, GEN10_MIRROR_FUSE3) &
+			 GEN12_MEML3_EN_MASK);
+
+	if (GRAPHICS_VER(gt->i915) >= 11 &&
+		   GRAPHICS_VER_FULL(gt->i915) < IP_VER(12, 50)) {
 		gt->steering_table[L3BANK] = icl_l3bank_steering_table;
 		gt->info.l3bank_mask =
 			~intel_uncore_read(gt->uncore, GEN10_MIRROR_FUSE3) &
 			GEN10_L3BANK_MASK;
+	} else if (HAS_MSLICES(gt->i915)) {
+		MISSING_CASE(INTEL_INFO(gt->i915)->platform);
 	}
 
 	return intel_engines_init_mmio(gt);
@@ -766,6 +786,24 @@ static void intel_gt_get_valid_steering(struct intel_gt *gt,
 		*sliceid = 0;		/* unused */
 		*subsliceid = __ffs(gt->info.l3bank_mask);
 		break;
+	case MSLICE:
+		GEM_DEBUG_WARN_ON(!gt->info.mslice_mask); /* should be impossible! */
+
+		*sliceid = __ffs(gt->info.mslice_mask);
+		*subsliceid = 0;	/* unused */
+		break;
+	case LNCF:
+		GEM_DEBUG_WARN_ON(!gt->info.mslice_mask); /* should be impossible! */
+
+		/*
+		 * 0xFDC[29:28] selects the mslice to steer to and 0xFDC[27]
+		 * selects which LNCF within the mslice to steer to.  An LNCF
+		 * is always present if its mslice is present, so we can safely
+		 * just steer to LNCF 0 in all cases.
+		 */
+		*sliceid = __ffs(gt->info.mslice_mask) << 1;
+		*subsliceid = 0;	/* unused */
+		break;
 	default:
 		MISSING_CASE(type);
 		*sliceid = 0;
drivers/gpu/drm/i915/gt/intel_gt.h +1 -0
index e7aabe0cc5bf..f9bcde31f697 100644
@@ -82,6 +82,7 @@ static inline bool intel_gt_needs_read_steering(struct intel_gt *gt,
 }
 
 u32 intel_gt_read_register_fw(struct intel_gt *gt, i915_reg_t reg);
+u32 intel_gt_read_register(struct intel_gt *gt, i915_reg_t reg);
 
 void intel_gt_info_print(const struct intel_gt_info *info,
 			 struct drm_printer *p);
drivers/gpu/drm/i915/gt/intel_gt_types.h +7 -0
index 97a5075288d2..a81e21bf1bd1 100644
@@ -47,9 +47,14 @@ struct intel_mmio_range {
  * of multicast registers.  If another type of steering does not have any
  * overlap in valid steering targets with 'subslice' style registers, we will
  * need to explicitly re-steer reads of registers of the other type.
+ *
+ * Only the replication types that may need additional non-default steering
+ * are listed here.
  */
 enum intel_steering_type {
 	L3BANK,
+	MSLICE,
+	LNCF,
 
 	NUM_STEERING_TYPES
 };
@@ -184,6 +189,8 @@ struct intel_gt {
 
 		/* Slice/subslice/EU info */
 		struct sseu_dev_info sseu;
+
+		unsigned long mslice_mask;
 	} info;
 };
 
drivers/gpu/drm/i915/gt/intel_region_lmem.c +1 -0
index 1f43aba2e9e2..196e7569a41a 100644
@@ -10,6 +10,7 @@
 #include "gem/i915_gem_lmem.h"
 #include "gem/i915_gem_region.h"
 #include "gem/i915_gem_ttm.h"
+#include "gt/intel_gt.h"
 
 static int init_fake_lmem_bar(struct intel_memory_region *mem)
 {
drivers/gpu/drm/i915/gt/intel_sseu.c +18 -0
index 367fd44b81c8..bbed8e8625e1 100644
@@ -759,3 +759,21 @@ void intel_sseu_print_topology(const struct sseu_dev_info *sseu,
 		}
 	}
 }
+
+u16 intel_slicemask_from_dssmask(u64 dss_mask, int dss_per_slice)
+{
+	u16 slice_mask = 0;
+	int i;
+
+	WARN_ON(sizeof(dss_mask) * 8 / dss_per_slice > 8 * sizeof(slice_mask));
+
+	for (i = 0; dss_mask; i++) {
+		if (dss_mask & GENMASK(dss_per_slice - 1, 0))
+			slice_mask |= BIT(i);
+
+		dss_mask >>= dss_per_slice;
+	}
+
+	return slice_mask;
+}
+
drivers/gpu/drm/i915/gt/intel_sseu.h +6 -0
index 4cd1a8a7298a..1073471d1980 100644
@@ -22,6 +22,10 @@ struct drm_printer;
 #define GEN_MAX_EUS		(16) /* TGL upper bound */
 #define GEN_MAX_EU_STRIDE GEN_SSEU_STRIDE(GEN_MAX_EUS)
 
+#define GEN_DSS_PER_GSLICE	4
+#define GEN_DSS_PER_CSLICE	8
+#define GEN_DSS_PER_MSLICE	8
+
 struct sseu_dev_info {
 	u8 slice_mask;
 	u8 subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE];
@@ -104,4 +108,6 @@ void intel_sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p);
 void intel_sseu_print_topology(const struct sseu_dev_info *sseu,
 			       struct drm_printer *p);
 
+u16 intel_slicemask_from_dssmask(u64 dss_mask, int dss_per_slice);
+
 #endif /* __INTEL_SSEU_H__ */
drivers/gpu/drm/i915/gt/intel_workarounds.c +84 -5

108 lines not on this page · raw message

drivers/gpu/drm/i915/i915_drv.h +3 -0
index eb7030e5a25b..effb555d14f5 100644
@@ -1720,6 +1720,9 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define HAS_RUNTIME_PM(dev_priv) (INTEL_INFO(dev_priv)->has_runtime_pm)
 #define HAS_64BIT_RELOC(dev_priv) (INTEL_INFO(dev_priv)->has_64bit_reloc)
 
+#define HAS_MSLICES(dev_priv) \
+	(INTEL_INFO(dev_priv)->has_mslices)
+
 #define HAS_IPC(dev_priv)		 (INTEL_INFO(dev_priv)->display.has_ipc)
 
 #define HAS_REGION(i915, i) (INTEL_INFO(i915)->memory_regions & (i))
drivers/gpu/drm/i915/i915_pci.c +1 -0
index 060abebdf4a4..65cbab1c1a15 100644
@@ -1012,6 +1012,7 @@ static const struct intel_device_info adl_p_info = {
 	.has_llc = 1, \
 	.has_logical_ring_contexts = 1, \
 	.has_logical_ring_elsq = 1, \
+	.has_mslices = 1, \
 	.has_rc6 = 1, \
 	.has_reset_engine = 1, \
 	.has_rps = 1, \
drivers/gpu/drm/i915/i915_reg.h +4 -0
index 60d780d17d5d..47f015976966 100644
@@ -2695,6 +2695,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define   GEN11_MCR_SLICE_MASK		GEN11_MCR_SLICE(0xf)
 #define   GEN11_MCR_SUBSLICE(subslice)	(((subslice) & 0x7) << 24)
 #define   GEN11_MCR_SUBSLICE_MASK	GEN11_MCR_SUBSLICE(0x7)
+#define   GEN11_MCR_MULTICAST		REG_BIT(31)
 #define RING_IPEIR(base)	_MMIO((base) + 0x64)
 #define RING_IPEHR(base)	_MMIO((base) + 0x68)
 #define RING_EIR(base)		_MMIO((base) + 0xb0)
@@ -3113,6 +3114,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define	GEN10_MIRROR_FUSE3		_MMIO(0x9118)
 #define GEN10_L3BANK_PAIR_COUNT     4
 #define GEN10_L3BANK_MASK   0x0F
+/* on Xe_HP the same fuses indicates mslices instead of L3 banks */
+#define GEN12_MAX_MSLICES 4
+#define GEN12_MEML3_EN_MASK 0x0F
 
 #define GEN8_EU_DISABLE0		_MMIO(0x9134)
 #define   GEN8_EU_DIS0_S0_MASK		0xffffff
drivers/gpu/drm/i915/intel_device_info.h +1 -0
index 75d225d0db47..75c69cfb11f2 100644
@@ -127,6 +127,7 @@ enum intel_ppgtt_type {
 	func(has_llc); \
 	func(has_logical_ring_contexts); \
 	func(has_logical_ring_elsq); \
+	func(has_mslices); \
 	func(has_pooled_eu); \
 	func(has_rc6); \
 	func(has_rc6p); \
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#27 lore raw

PATCH v2 14/50 drm/i915/xehp: Loop over all gslices for INSTDONE processing

In reply to Matt Roper

We no longer have traditional slices on Xe_HP platforms, but the INSTDONE registers are replicated according to gslice representation which is similar. We can mostly re-use the existing instdone code with just a few modifications:

* Create an alternate instdone loop macro that will iterate over the flat DSS space, but still provide the gslice/dss steering values for compatibility with the legacy code.

* We should allocate INSTDONE storage space according to the maximum number of gslices rather than the maximum number of legacy slices to ensure we have enough storage space to hold all of the values. XeHP design has 8 gslices, whereas older platforms never had more than 3 slices.

---
 drivers/gpu/drm/i915/gt/intel_engine_cs.c    | 48 +++++++++++---------
 drivers/gpu/drm/i915/gt/intel_engine_types.h | 12 ++++-
 drivers/gpu/drm/i915/gt/intel_sseu.h         |  7 +++
 drivers/gpu/drm/i915/i915_gpu_error.c        | 32 +++++++++----
 4 files changed, 66 insertions(+), 33 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +26 -22
index 6c2cb1400c8c..54a762356ca3 100644
@@ -1182,16 +1182,16 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,
 	u32 mmio_base = engine->mmio_base;
 	int slice;
 	int subslice;
+	int iter;
 
 	memset(instdone, 0, sizeof(*instdone));
 
-	switch (GRAPHICS_VER(i915)) {
-	default:
+	if (GRAPHICS_VER(i915) >= 8) {
 		instdone->instdone =
 			intel_uncore_read(uncore, RING_INSTDONE(mmio_base));
 
 		if (engine->id != RCS0)
-			break;
+			return;
 
 		instdone->slice_common =
 			intel_uncore_read(uncore, GEN7_SC_INSTDONE);
@@ -1201,21 +1201,32 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,
 			instdone->slice_common_extra[1] =
 				intel_uncore_read(uncore, GEN12_SC_INSTDONE_EXTRA2);
 		}
-		for_each_instdone_slice_subslice(i915, sseu, slice, subslice) {
-			instdone->sampler[slice][subslice] =
-				read_subslice_reg(engine, slice, subslice,
-						  GEN7_SAMPLER_INSTDONE);
-			instdone->row[slice][subslice] =
-				read_subslice_reg(engine, slice, subslice,
-						  GEN7_ROW_INSTDONE);
+
+		if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50)) {
+			for_each_instdone_gslice_dss_xehp(i915, sseu, iter, slice, subslice) {
+				instdone->sampler[slice][subslice] =
+					read_subslice_reg(engine, slice, subslice,
+							  GEN7_SAMPLER_INSTDONE);
+				instdone->row[slice][subslice] =
+					read_subslice_reg(engine, slice, subslice,
+							  GEN7_ROW_INSTDONE);
+			}
+		} else {
+			for_each_instdone_slice_subslice(i915, sseu, slice, subslice) {
+				instdone->sampler[slice][subslice] =
+					read_subslice_reg(engine, slice, subslice,
+							  GEN7_SAMPLER_INSTDONE);
+				instdone->row[slice][subslice] =
+					read_subslice_reg(engine, slice, subslice,
+							  GEN7_ROW_INSTDONE);
+			}
 		}
-		break;
-	case 7:
+	} else if (GRAPHICS_VER(i915) >= 7) {
 		instdone->instdone =
 			intel_uncore_read(uncore, RING_INSTDONE(mmio_base));
 
 		if (engine->id != RCS0)
-			break;
+			return;
 
 		instdone->slice_common =
 			intel_uncore_read(uncore, GEN7_SC_INSTDONE);
@@ -1223,22 +1234,15 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,
 			intel_uncore_read(uncore, GEN7_SAMPLER_INSTDONE);
 		instdone->row[0][0] =
 			intel_uncore_read(uncore, GEN7_ROW_INSTDONE);
-
-		break;
-	case 6:
-	case 5:
-	case 4:
+	} else if (GRAPHICS_VER(i915) >= 4) {
 		instdone->instdone =
 			intel_uncore_read(uncore, RING_INSTDONE(mmio_base));
 		if (engine->id == RCS0)
 			/* HACK: Using the wrong struct member */
 			instdone->slice_common =
 				intel_uncore_read(uncore, GEN4_INSTDONE1);
-		break;
-	case 3:
-	case 2:
+	} else {
 		instdone->instdone = intel_uncore_read(uncore, GEN2_INSTDONE);
-		break;
 	}
 }
 
drivers/gpu/drm/i915/gt/intel_engine_types.h +10 -2
index e0b1cbdbadce..9d7cf9a062dc 100644
@@ -78,8 +78,8 @@ struct intel_instdone {
 	/* The following exist only in the RCS engine */
 	u32 slice_common;
 	u32 slice_common_extra[2];
-	u32 sampler[I915_MAX_SLICES][I915_MAX_SUBSLICES];
-	u32 row[I915_MAX_SLICES][I915_MAX_SUBSLICES];
+	u32 sampler[GEN_MAX_GSLICES][I915_MAX_SUBSLICES];
+	u32 row[GEN_MAX_GSLICES][I915_MAX_SUBSLICES];
 };
 
 /*
@@ -579,4 +579,12 @@ intel_engine_has_relative_mmio(const struct intel_engine_cs * const engine)
 		for_each_if((instdone_has_slice(dev_priv_, sseu_, slice_)) && \
 			    (instdone_has_subslice(dev_priv_, sseu_, slice_, \
 						    subslice_)))
+
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+	for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \
+	     (iter_) < GEN_MAX_SUBSLICES; \
+	     (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \
+	     (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \
+		for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))
+
 #endif /* __INTEL_ENGINE_TYPES_H__ */
drivers/gpu/drm/i915/gt/intel_sseu.h +7 -0
index 1073471d1980..74487650b08f 100644
@@ -26,6 +26,9 @@ struct drm_printer;
 #define GEN_DSS_PER_CSLICE	8
 #define GEN_DSS_PER_MSLICE	8
 
+#define GEN_MAX_GSLICES		(GEN_MAX_SUBSLICES / GEN_DSS_PER_GSLICE)
+#define GEN_MAX_CSLICES		(GEN_MAX_SUBSLICES / GEN_DSS_PER_CSLICE)
+
 struct sseu_dev_info {
 	u8 slice_mask;
 	u8 subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE];
@@ -78,6 +81,10 @@ intel_sseu_has_subslice(const struct sseu_dev_info *sseu, int slice,
 	u8 mask;
 	int ss_idx = subslice / BITS_PER_BYTE;
 
+	if (slice >= sseu->max_slices ||
+	    subslice >= sseu->max_subslices)
+		return false;
+
 	GEM_BUG_ON(ss_idx >= sseu->ss_stride);
 
 	mask = sseu->subslice_mask[slice * sseu->ss_stride + ss_idx];
drivers/gpu/drm/i915/i915_gpu_error.c +23 -9
index a2c58b54a592..c1e744b5ab47 100644
@@ -444,15 +444,29 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,
 	if (GRAPHICS_VER(m->i915) <= 6)
 		return;
 
-	for_each_instdone_slice_subslice(m->i915, sseu, slice, subslice)
-		err_printf(m, "  SAMPLER_INSTDONE[%d][%d]: 0x%08x\n",
-			   slice, subslice,
-			   ee->instdone.sampler[slice][subslice]);
-
-	for_each_instdone_slice_subslice(m->i915, sseu, slice, subslice)
-		err_printf(m, "  ROW_INSTDONE[%d][%d]: 0x%08x\n",
-			   slice, subslice,
-			   ee->instdone.row[slice][subslice]);
+	if (GRAPHICS_VER_FULL(m->i915) >= IP_VER(12, 50)) {
+		int iter;
+
+		for_each_instdone_gslice_dss_xehp(m->i915, sseu, iter, slice, subslice)
+			err_printf(m, "  SAMPLER_INSTDONE[%d][%d]: 0x%08x\n",
+				   slice, subslice,
+				   ee->instdone.sampler[slice][subslice]);
+
+		for_each_instdone_gslice_dss_xehp(m->i915, sseu, iter, slice, subslice)
+			err_printf(m, "  ROW_INSTDONE[%d][%d]: 0x%08x\n",
+				   slice, subslice,
+				   ee->instdone.row[slice][subslice]);
+	} else {
+		for_each_instdone_slice_subslice(m->i915, sseu, slice, subslice)
+			err_printf(m, "  SAMPLER_INSTDONE[%d][%d]: 0x%08x\n",
+				   slice, subslice,
+				   ee->instdone.sampler[slice][subslice]);
+
+		for_each_instdone_slice_subslice(m->i915, sseu, slice, subslice)
+			err_printf(m, "  ROW_INSTDONE[%d][%d]: 0x%08x\n",
+				   slice, subslice,
+				   ee->instdone.row[slice][subslice]);
+	}
 
 	if (GRAPHICS_VER(m->i915) < 12)
 		return;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#28 lore raw

PATCH v2 15/50 drm/i915/xehpsdv: add initial XeHP SDV definitions

In reply to Matt Roper

From: Lucas De Marchi <[email protected]>

XeHP SDV is a Intel® dGPU without display. This is just the definition of some basic platform macros, by large a copy of current state of Tigerlake which does not reflect the end state of this platform.

v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)

Bspec: 44467, 48077

---
 drivers/gpu/drm/i915/i915_drv.h          |  4 ++++
 drivers/gpu/drm/i915/i915_pci.c          | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  1 +
 drivers/gpu/drm/i915/intel_step.c        | 12 +++++++++++-
 drivers/gpu/drm/i915/intel_step.h        |  1 +
 6 files changed, 38 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +4 -0
index effb555d14f5..24181aa36efb 100644
@@ -1453,6 +1453,7 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_DG1(dev_priv)        IS_PLATFORM(dev_priv, INTEL_DG1)
 #define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_S)
 #define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_P)
+#define IS_XEHPSDV(dev_priv) IS_PLATFORM(dev_priv, INTEL_XEHPSDV)
 #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \
 				    (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00)
 #define IS_BDW_ULT(dev_priv) \
@@ -1611,6 +1612,9 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 	(IS_ALDERLAKE_P(__i915) && \
 	 IS_GT_STEP(__i915, since, until))
 
+#define IS_XEHPSDV_GT_STEP(p, since, until) \
+	(IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until))
+
 #define IS_LP(dev_priv)		(INTEL_INFO(dev_priv)->is_lp)
 #define IS_GEN9_LP(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && IS_LP(dev_priv))
 #define IS_GEN9_BC(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && !IS_LP(dev_priv))
drivers/gpu/drm/i915/i915_pci.c +20 -0
index 65cbab1c1a15..07c57d8f3a9c 100644
@@ -1020,6 +1020,26 @@ static const struct intel_device_info adl_p_info = {
 	.ppgtt_size = 48, \
 	.ppgtt_type = INTEL_PPGTT_FULL
 
+#define XE_HPM_FEATURES \
+	.media_ver = 12, \
+	.media_rel = 50
+
+__maybe_unused
+static const struct intel_device_info xehpsdv_info = {
+	XE_HP_FEATURES,
+	XE_HPM_FEATURES,
+	DGFX_FEATURES,
+	PLATFORM(INTEL_XEHPSDV),
+	.display = { },
+	.pipe_mask = 0,
+	.platform_engine_mask =
+		BIT(RCS0) | BIT(BCS0) |
+		BIT(VECS0) | BIT(VECS1) | BIT(VECS2) | BIT(VECS3) |
+		BIT(VCS0) | BIT(VCS1) | BIT(VCS2) | BIT(VCS3) |
+		BIT(VCS4) | BIT(VCS5) | BIT(VCS6) | BIT(VCS7),
+	.require_force_probe = 1,
+};
+
 #undef PLATFORM
 
 /*
drivers/gpu/drm/i915/intel_device_info.c +1 -0
index d2a514d2551d..b750f9ded9d5 100644
@@ -68,6 +68,7 @@ static const char * const platform_names[] = {
 	PLATFORM_NAME(DG1),
 	PLATFORM_NAME(ALDERLAKE_S),
 	PLATFORM_NAME(ALDERLAKE_P),
+	PLATFORM_NAME(XEHPSDV),
 };
 #undef PLATFORM_NAME
 
drivers/gpu/drm/i915/intel_device_info.h +1 -0
index 75c69cfb11f2..690a0d2812bb 100644
@@ -88,6 +88,7 @@ enum intel_platform {
 	INTEL_DG1,
 	INTEL_ALDERLAKE_S,
 	INTEL_ALDERLAKE_P,
+	INTEL_XEHPSDV,
 	INTEL_MAX_PLATFORMS
 };
 
drivers/gpu/drm/i915/intel_step.c +11 -1
index ba9479a67521..a27a41caed70 100644
@@ -54,6 +54,13 @@ static const struct intel_step_info adlp_revid_step_tbl[] = {
 	[0xC] = { .gt_step = STEP_C0, .display_step = STEP_D0 },
 };
 
+static const struct intel_step_info xehpsdv_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0 },
+	[0x1] = { .gt_step = STEP_A1 },
+	[0x4] = { .gt_step = STEP_B0 },
+	[0x8] = { .gt_step = STEP_C0 },
+};
+
 void intel_step_init(struct drm_i915_private *i915)
 {
 	const struct intel_step_info *revids = NULL;
@@ -61,7 +68,10 @@ void intel_step_init(struct drm_i915_private *i915)
 	int revid = INTEL_REVID(i915);
 	struct intel_step_info step = {};
 
-	if (IS_ALDERLAKE_P(i915)) {
+	if (IS_XEHPSDV(i915)) {
+		revids = xehpsdv_revid_step_tbl;
+		size = ARRAY_SIZE(xehpsdv_revid_step_tbl);
+	} else if (IS_ALDERLAKE_P(i915)) {
 		revids = adlp_revid_step_tbl;
 		size = ARRAY_SIZE(adlp_revid_step_tbl);
 	} else if (IS_ALDERLAKE_S(i915)) {
drivers/gpu/drm/i915/intel_step.h +1 -0
index 958a8bb5d677..8efacef6ab31 100644
@@ -22,6 +22,7 @@ struct intel_step_info {
 enum intel_step {
 	STEP_NONE = 0,
 	STEP_A0,
+	STEP_A1,
 	STEP_A2,
 	STEP_B0,
 	STEP_B1,
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 15/50
#29 lore raw

Re: [Intel-gfx] [PATCH v2 15/50] drm/i915/xehpsdv: add initial XeHP SDV definitions

Quoted 8 lines · Matt Roper

From: Lucas De Marchi <[email protected]>

XeHP SDV is a Intel® dGPU without display. This is just the definition of some basic platform macros, by large a copy of current state of Tigerlake which does not reflect the end state of this platform.

v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)

Quoted 130 lines

Bspec: 44467, 48077

---
 drivers/gpu/drm/i915/i915_drv.h          |  4 ++++
 drivers/gpu/drm/i915/i915_pci.c          | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  1 +
 drivers/gpu/drm/i915/intel_step.c        | 12 +++++++++++-
 drivers/gpu/drm/i915/intel_step.h        |  1 +
 6 files changed, 38 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +4 -0
index effb555d14f5..24181aa36efb 100644
@@ -1453,6 +1453,7 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_DG1(dev_priv)        IS_PLATFORM(dev_priv, INTEL_DG1)
 #define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_S)
 #define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_P)
+#define IS_XEHPSDV(dev_priv) IS_PLATFORM(dev_priv, INTEL_XEHPSDV)
 #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \
 				    (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00)
 #define IS_BDW_ULT(dev_priv) \
@@ -1611,6 +1612,9 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 	(IS_ALDERLAKE_P(__i915) && \
 	 IS_GT_STEP(__i915, since, until))
 
+#define IS_XEHPSDV_GT_STEP(p, since, until) \
+	(IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until))
+
 #define IS_LP(dev_priv)		(INTEL_INFO(dev_priv)->is_lp)
 #define IS_GEN9_LP(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && IS_LP(dev_priv))
 #define IS_GEN9_BC(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && !IS_LP(dev_priv))
drivers/gpu/drm/i915/i915_pci.c +20 -0
index 65cbab1c1a15..07c57d8f3a9c 100644
@@ -1020,6 +1020,26 @@ static const struct intel_device_info adl_p_info = {
 	.ppgtt_size = 48, \
 	.ppgtt_type = INTEL_PPGTT_FULL
 
+#define XE_HPM_FEATURES \
+	.media_ver = 12, \
+	.media_rel = 50
+
+__maybe_unused
+static const struct intel_device_info xehpsdv_info = {
+	XE_HP_FEATURES,
+	XE_HPM_FEATURES,
+	DGFX_FEATURES,
+	PLATFORM(INTEL_XEHPSDV),
+	.display = { },
+	.pipe_mask = 0,
+	.platform_engine_mask =
+		BIT(RCS0) | BIT(BCS0) |
+		BIT(VECS0) | BIT(VECS1) | BIT(VECS2) | BIT(VECS3) |
+		BIT(VCS0) | BIT(VCS1) | BIT(VCS2) | BIT(VCS3) |
+		BIT(VCS4) | BIT(VCS5) | BIT(VCS6) | BIT(VCS7),
+	.require_force_probe = 1,
+};
+
 #undef PLATFORM
 
 /*
drivers/gpu/drm/i915/intel_device_info.c +1 -0
index d2a514d2551d..b750f9ded9d5 100644
@@ -68,6 +68,7 @@ static const char * const platform_names[] = {
 	PLATFORM_NAME(DG1),
 	PLATFORM_NAME(ALDERLAKE_S),
 	PLATFORM_NAME(ALDERLAKE_P),
+	PLATFORM_NAME(XEHPSDV),
 };
 #undef PLATFORM_NAME
 
drivers/gpu/drm/i915/intel_device_info.h +1 -0
index 75c69cfb11f2..690a0d2812bb 100644
@@ -88,6 +88,7 @@ enum intel_platform {
 	INTEL_DG1,
 	INTEL_ALDERLAKE_S,
 	INTEL_ALDERLAKE_P,
+	INTEL_XEHPSDV,
 	INTEL_MAX_PLATFORMS
 };
 
drivers/gpu/drm/i915/intel_step.c +11 -1
index ba9479a67521..a27a41caed70 100644
@@ -54,6 +54,13 @@ static const struct intel_step_info adlp_revid_step_tbl[] = {
 	[0xC] = { .gt_step = STEP_C0, .display_step = STEP_D0 },
 };
 
+static const struct intel_step_info xehpsdv_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0 },
+	[0x1] = { .gt_step = STEP_A1 },
+	[0x4] = { .gt_step = STEP_B0 },
+	[0x8] = { .gt_step = STEP_C0 },
+};
+
 void intel_step_init(struct drm_i915_private *i915)
 {
 	const struct intel_step_info *revids = NULL;
@@ -61,7 +68,10 @@ void intel_step_init(struct drm_i915_private *i915)
 	int revid = INTEL_REVID(i915);
 	struct intel_step_info step = {};
 
-	if (IS_ALDERLAKE_P(i915)) {
+	if (IS_XEHPSDV(i915)) {
+		revids = xehpsdv_revid_step_tbl;
+		size = ARRAY_SIZE(xehpsdv_revid_step_tbl);
+	} else if (IS_ALDERLAKE_P(i915)) {
 		revids = adlp_revid_step_tbl;
 		size = ARRAY_SIZE(adlp_revid_step_tbl);
 	} else if (IS_ALDERLAKE_S(i915)) {
drivers/gpu/drm/i915/intel_step.h +0 -0
index 958a8bb5d677..8efacef6ab31 100644

drivers/gpu/drm/i915/intel_step.h struct intel_step_info { · line 28

Quoted 7 lines
drivers/gpu/drm/i915/intel_step.h +1 -0
@@ -22,6 +22,7 @@ struct intel_step_info {
 enum intel_step {
 	STEP_NONE = 0,
 	STEP_A0,
+	STEP_A1,
 	STEP_A2,
 	STEP_B0,
 	STEP_B1,

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#30 lore raw

PATCH v2 16/50 drm/i915/xehp: Changes to ss/eu definitions

In reply to Matt Roper

From: Matthew Auld <[email protected]>

Xe_HP no longer has "slices" in the same way that old platforms did. There are new concepts (gslices, cslices, mslices) that apply in various contexts, but for the purposes of fusing slices no longer exist and we just have one large pool of dual-subslices (DSS) to work with. Furthermore, the meaning of the DSS fuse is inverted compared to past platforms --- it now specifies which DSS are enabled rather than which ones are disabled.

---
 drivers/gpu/drm/i915/gt/intel_sseu.c | 24 ++++++++++++++++++++----
 drivers/gpu/drm/i915/i915_getparam.c |  6 ++++--
 drivers/gpu/drm/i915/i915_reg.h      |  3 +++
 3 files changed, 27 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +20 -4
index bbed8e8625e1..5d1b7d06c96b 100644
@@ -139,17 +139,33 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 	 * Gen12 has Dual-Subslices, which behave similarly to 2 gen11 SS.
 	 * Instead of splitting these, provide userspace with an array
 	 * of DSS to more closely represent the hardware resource.
+	 *
+	 * In addition, the concept of slice has been removed in Xe_HP.
+	 * To be compatible with prior generations, assume a single slice
+	 * across the entire device. Then calculate out the DSS for each
+	 * workload type within that software slice.
 	 */
 	intel_sseu_set_info(sseu, 1, 6, 16);
 
-	s_en = intel_uncore_read(uncore, GEN11_GT_SLICE_ENABLE) &
-		GEN11_GT_S_ENA_MASK;
+	/*
+	 * As mentioned above, Xe_HP does not have the concept of a slice.
+	 * Enable one for software backwards compatibility.
+	 */
+	if (GRAPHICS_VER_FULL(gt->i915) >= IP_VER(12, 50))
+		s_en = 0x1;
+	else
+		s_en = intel_uncore_read(uncore, GEN11_GT_SLICE_ENABLE) &
+		       GEN11_GT_S_ENA_MASK;
 
 	dss_en = intel_uncore_read(uncore, GEN12_GT_DSS_ENABLE);
 
 	/* one bit per pair of EUs */
-	eu_en_fuse = ~(intel_uncore_read(uncore, GEN11_EU_DISABLE) &
-		       GEN11_EU_DIS_MASK);
+	if (GRAPHICS_VER_FULL(gt->i915) >= IP_VER(12, 50))
+		eu_en_fuse = intel_uncore_read(uncore, XEHP_EU_ENABLE) & XEHP_EU_ENA_MASK;
+	else
+		eu_en_fuse = ~(intel_uncore_read(uncore, GEN11_EU_DISABLE) &
+			       GEN11_EU_DIS_MASK);
+
 	for (eu = 0; eu < sseu->max_eus_per_subslice / 2; eu++)
 		if (eu_en_fuse & BIT(eu))
 			eu_en |= BIT(eu * 2) | BIT(eu * 2 + 1);
drivers/gpu/drm/i915/i915_getparam.c +4 -2
index 24e18219eb50..e289397d9178 100644
@@ -15,7 +15,7 @@ int i915_getparam_ioctl(struct drm_device *dev, void *data,
 	struct pci_dev *pdev = to_pci_dev(dev->dev);
 	const struct sseu_dev_info *sseu = &i915->gt.info.sseu;
 	drm_i915_getparam_t *param = data;
-	int value;
+	int value = 0;
 
 	switch (param->param) {
 	case I915_PARAM_IRQ_ACTIVE:
@@ -150,7 +150,9 @@ int i915_getparam_ioctl(struct drm_device *dev, void *data,
 			return -ENODEV;
 		break;
 	case I915_PARAM_SUBSLICE_MASK:
-		value = sseu->subslice_mask[0];
+		/* Only copy bits from the first slice */
+		memcpy(&value, sseu->subslice_mask,
+		       min(sseu->ss_stride, (u8)sizeof(value)));
 		if (!value)
 			return -ENODEV;
 		break;
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 47f015976966..4cabafa1c836 100644
@@ -3151,6 +3151,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 
 #define GEN12_GT_DSS_ENABLE _MMIO(0x913C)
 
+#define XEHP_EU_ENABLE			_MMIO(0x9134)
+#define XEHP_EU_ENA_MASK		0xFF
+
 #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
 #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
 #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#31 lore raw

PATCH v2 17/50 drm/i915/xehpsdv: Add maximum sseu limits

In reply to Matt Roper

Due to the removal of legacy slices and the transition to a gslice/cslice/mslice/etc. design, we'll internally store all DSS under "slice0."

---
 drivers/gpu/drm/i915/gt/intel_sseu.c         | 5 ++++-
 drivers/gpu/drm/i915/gt/intel_sseu.h         | 2 +-
 drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c | 2 +-
 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +4 -1
index 5d1b7d06c96b..16c0552fcd1d 100644
@@ -145,7 +145,10 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 	 * across the entire device. Then calculate out the DSS for each
 	 * workload type within that software slice.
 	 */
-	intel_sseu_set_info(sseu, 1, 6, 16);
+	if (IS_XEHPSDV(gt->i915))
+		intel_sseu_set_info(sseu, 1, 32, 16);
+	else
+		intel_sseu_set_info(sseu, 1, 6, 16);
 
 	/*
 	 * As mentioned above, Xe_HP does not have the concept of a slice.
drivers/gpu/drm/i915/gt/intel_sseu.h +1 -1
index 74487650b08f..204ea6709460 100644
@@ -16,7 +16,7 @@ struct intel_gt;
 struct drm_printer;
 
 #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
+#define GEN_MAX_SUBSLICES	(32) /* XEHPSDV upper bound */
 #define GEN_SSEU_STRIDE(max_entries) DIV_ROUND_UP(max_entries, BITS_PER_BYTE)
 #define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)
 #define GEN_MAX_EUS		(16) /* TGL upper bound */
drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c +1 -1
index 714fe8495775..a424150b052e 100644
@@ -53,7 +53,7 @@ static void cherryview_sseu_device_status(struct intel_gt *gt,
 static void gen10_sseu_device_status(struct intel_gt *gt,
 				     struct sseu_dev_info *sseu)
 {
-#define SS_MAX 6
+#define SS_MAX 8
 	struct intel_uncore *uncore = gt->uncore;
 	const struct intel_gt_info *info = &gt->info;
 	u32 s_reg[SS_MAX], eu_reg[2 * SS_MAX], eu_mask[2];
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 17/50
#32 lore raw

Re: [Intel-gfx] [PATCH v2 17/50] drm/i915/xehpsdv: Add maximum sseu limits

-caz

Quoted 61 lines · Matt Roper

Due to the removal of legacy slices and the transition to a gslice/cslice/mslice/etc. design, we'll internally store all DSS under
"slice0."

---
 drivers/gpu/drm/i915/gt/intel_sseu.c         | 5 ++++-
 drivers/gpu/drm/i915/gt/intel_sseu.h         | 2 +-
 drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c | 2 +-
 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +0 -0
index 5d1b7d06c96b..16c0552fcd1d 100644
@@ -145,7 +145,10 @@ static void gen12_sseu_info_init(struct intel_gt
 *gt)
 	 * across the entire device. Then calculate out the DSS for

each

drivers/gpu/drm/i915/gt/intel_sseu.c +4 -1
 	 * workload type within that software slice.
 	 */
-	intel_sseu_set_info(sseu, 1, 6, 16);
+	if (IS_XEHPSDV(gt->i915))
+		intel_sseu_set_info(sseu, 1, 32, 16);
+	else
+		intel_sseu_set_info(sseu, 1, 6, 16);
 
 	/*
 	 * As mentioned above, Xe_HP does not have the concept of a

slice.

drivers/gpu/drm/i915/gt/intel_sseu.h +1 -1
index 74487650b08f..204ea6709460 100644
@@ -16,7 +16,7 @@ struct intel_gt;
 struct drm_printer;
 
 #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
+#define GEN_MAX_SUBSLICES	(32) /* XEHPSDV upper bound */
 #define GEN_SSEU_STRIDE(max_entries) DIV_ROUND_UP(max_entries,
 BITS_PER_BYTE)
 #define GEN_MAX_SUBSLICE_STRIDE GEN_SSEU_STRIDE(GEN_MAX_SUBSLICES)

#define GEN_MAX_EUS (16) /* TGL upper bound */

drivers/gpu/drm/i915/gt/intel_sseu_debugfs.c +1 -1
index 714fe8495775..a424150b052e 100644
@@ -53,7 +53,7 @@ static void cherryview_sseu_device_status(struct
 intel_gt *gt,
 static void gen10_sseu_device_status(struct intel_gt *gt,
 				     struct sseu_dev_info *sseu)
 {
-#define SS_MAX 6
+#define SS_MAX 8
 	struct intel_uncore *uncore = gt->uncore;
 	const struct intel_gt_info *info = &gt->info;
Quoted 1 line

u32 s_reg[SS_MAX], eu_reg[2 * SS_MAX], eu_mask[2];

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#33 lore raw

PATCH v2 18/50 drm/i915/xehpsdv: Add compute DSS type

In reply to Matt Roper

From: Stuart Summers <[email protected]>

Starting in XeHP, the concept of slice has been removed in favor of DSS (Dual-Subslice) masks for various workload types. These workloads have been divided into those enabled for geometry and those enabled for compute.

i915 currently maintains a single set of S/SS/EU masks for the device. The goal of this patch set is to minimize the amount of impact to prior generations while still giving the user maximum flexibility.

Bspec: 33117, 33118, 20376

---
 drivers/gpu/drm/i915/gt/intel_sseu.c | 73 ++++++++++++++++++++--------
 drivers/gpu/drm/i915/gt/intel_sseu.h |  5 +-
 drivers/gpu/drm/i915/i915_reg.h      |  3 +-
 include/uapi/drm/i915_drm.h          |  3 --
 4 files changed, 59 insertions(+), 25 deletions(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +53 -20
index 16c0552fcd1d..5d3b8dff464c 100644
@@ -46,11 +46,11 @@ u32 intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice)
 }
 
 void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,
-			      u32 ss_mask)
+			      u8 *subslice_mask, u32 ss_mask)
 {
 	int offset = slice * sseu->ss_stride;
 
-	memcpy(&sseu->subslice_mask[offset], &ss_mask, sseu->ss_stride);
+	memcpy(&subslice_mask[offset], &ss_mask, sseu->ss_stride);
 }
 
 unsigned int
@@ -100,14 +100,24 @@ static u16 compute_eu_total(const struct sseu_dev_info *sseu)
 	return total;
 }
 
-static void gen11_compute_sseu_info(struct sseu_dev_info *sseu,
-				    u8 s_en, u32 ss_en, u16 eu_en)
+static u32 get_ss_stride_mask(struct sseu_dev_info *sseu, u8 s, u32 ss_en)
+{
+	u32 ss_mask;
+
+	ss_mask = ss_en >> (s * sseu->max_subslices);
+	ss_mask &= GENMASK(sseu->max_subslices - 1, 0);
+
+	return ss_mask;
+}
+
+static void gen11_compute_sseu_info(struct sseu_dev_info *sseu, u8 s_en,
+				    u32 g_ss_en, u32 c_ss_en, u16 eu_en)
 {
 	int s, ss;
 
-	/* ss_en represents entire subslice mask across all slices */
+	/* g_ss_en/c_ss_en represent entire subslice mask across all slices */
 	GEM_BUG_ON(sseu->max_slices * sseu->max_subslices >
-		   sizeof(ss_en) * BITS_PER_BYTE);
+		   sizeof(g_ss_en) * BITS_PER_BYTE);
 
 	for (s = 0; s < sseu->max_slices; s++) {
 		if ((s_en & BIT(s)) == 0)
@@ -115,7 +125,23 @@ static void gen11_compute_sseu_info(struct sseu_dev_info *sseu,
 
 		sseu->slice_mask |= BIT(s);
 
-		intel_sseu_set_subslices(sseu, s, ss_en);
+		/*
+		 * XeHP introduces the concept of compute vs
+		 * geometry DSS. To reduce variation between GENs
+		 * around subslice usage, store a mask for both the
+		 * geometry and compute enabled masks, to provide
+		 * to user space later in QUERY_TOPOLOGY_INFO, and
+		 * compute a total enabled subslice count for the
+		 * purposes of selecting subslices to use in a
+		 * particular GEM context.
+		 */
+		intel_sseu_set_subslices(sseu, s, sseu->compute_subslice_mask,
+					 get_ss_stride_mask(sseu, s, c_ss_en));
+		intel_sseu_set_subslices(sseu, s, sseu->geometry_subslice_mask,
+					 get_ss_stride_mask(sseu, s, g_ss_en));
+		intel_sseu_set_subslices(sseu, s, sseu->subslice_mask,
+					 get_ss_stride_mask(sseu, s,
+							    g_ss_en | c_ss_en));
 
 		for (ss = 0; ss < sseu->max_subslices; ss++)
 			if (intel_sseu_has_subslice(sseu, s, ss))
@@ -129,7 +155,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 {
 	struct sseu_dev_info *sseu = &gt->info.sseu;
 	struct intel_uncore *uncore = gt->uncore;
-	u32 dss_en;
+	u32 g_dss_en, c_dss_en = 0;
 	u16 eu_en = 0;
 	u8 eu_en_fuse;
 	u8 s_en;
@@ -145,10 +171,12 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 	 * across the entire device. Then calculate out the DSS for each
 	 * workload type within that software slice.
 	 */
-	if (IS_XEHPSDV(gt->i915))
+	if (IS_XEHPSDV(gt->i915)) {
 		intel_sseu_set_info(sseu, 1, 32, 16);
-	else
+		sseu->has_compute_dss = 1;
+	} else {
 		intel_sseu_set_info(sseu, 1, 6, 16);
+	}
 
 	/*
 	 * As mentioned above, Xe_HP does not have the concept of a slice.
@@ -160,7 +188,9 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 		s_en = intel_uncore_read(uncore, GEN11_GT_SLICE_ENABLE) &
 		       GEN11_GT_S_ENA_MASK;
 
-	dss_en = intel_uncore_read(uncore, GEN12_GT_DSS_ENABLE);
+	g_dss_en = intel_uncore_read(uncore, GEN12_GT_GEOMETRY_DSS_ENABLE);
+	if (sseu->has_compute_dss)
+		c_dss_en = intel_uncore_read(uncore, GEN12_GT_COMPUTE_DSS_ENABLE);
 
 	/* one bit per pair of EUs */
 	if (GRAPHICS_VER_FULL(gt->i915) >= IP_VER(12, 50))
@@ -173,7 +203,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 		if (eu_en_fuse & BIT(eu))
 			eu_en |= BIT(eu * 2) | BIT(eu * 2 + 1);
 
-	gen11_compute_sseu_info(sseu, s_en, dss_en, eu_en);
+	gen11_compute_sseu_info(sseu, s_en, g_dss_en, c_dss_en, eu_en);
 
 	/* TGL only supports slice-level power gating */
 	sseu->has_slice_pg = 1;
@@ -199,7 +229,7 @@ static void gen11_sseu_info_init(struct intel_gt *gt)
 	eu_en = ~(intel_uncore_read(uncore, GEN11_EU_DISABLE) &
 		  GEN11_EU_DIS_MASK);
 
-	gen11_compute_sseu_info(sseu, s_en, ss_en, eu_en);
+	gen11_compute_sseu_info(sseu, s_en, ss_en, 0, eu_en);
 
 	/* ICL has no power gating restrictions. */
 	sseu->has_slice_pg = 1;
@@ -260,9 +290,9 @@ static void gen10_sseu_info_init(struct intel_gt *gt)
 		 * Slice0 can have up to 3 subslices, but there are only 2 in
 		 * slice1/2.
 		 */
-		intel_sseu_set_subslices(sseu, s, s == 0 ?
-					 subslice_mask_with_eus :
-					 subslice_mask_with_eus & 0x3);
+		intel_sseu_set_subslices(sseu, s, sseu->subslice_mask,
+					 s == 0 ? subslice_mask_with_eus :
+						  subslice_mask_with_eus & 0x3);
 	}
 
 	sseu->eu_total = compute_eu_total(sseu);
@@ -317,7 +347,7 @@ static void cherryview_sseu_info_init(struct intel_gt *gt)
 		sseu_set_eus(sseu, 0, 1, ~disabled_mask);
 	}
 
-	intel_sseu_set_subslices(sseu, 0, subslice_mask);
+	intel_sseu_set_subslices(sseu, 0, sseu->subslice_mask, subslice_mask);
 
 	sseu->eu_total = compute_eu_total(sseu);
 
@@ -373,7 +403,8 @@ static void gen9_sseu_info_init(struct intel_gt *gt)
 			/* skip disabled slice */
 			continue;
 
-		intel_sseu_set_subslices(sseu, s, subslice_mask);
+		intel_sseu_set_subslices(sseu, s, sseu->subslice_mask,
+					 subslice_mask);
 
 		eu_disable = intel_uncore_read(uncore, GEN9_EU_DISABLE(s));
 		for (ss = 0; ss < sseu->max_subslices; ss++) {
@@ -485,7 +516,8 @@ static void bdw_sseu_info_init(struct intel_gt *gt)
 			/* skip disabled slice */
 			continue;
 
-		intel_sseu_set_subslices(sseu, s, subslice_mask);
+		intel_sseu_set_subslices(sseu, s, sseu->subslice_mask,
+					 subslice_mask);
 
 		for (ss = 0; ss < sseu->max_subslices; ss++) {
 			u8 eu_disabled_mask;
@@ -583,7 +615,8 @@ static void hsw_sseu_info_init(struct intel_gt *gt)
 			    sseu->eu_per_subslice);
 
 	for (s = 0; s < sseu->max_slices; s++) {
-		intel_sseu_set_subslices(sseu, s, subslice_mask);
+		intel_sseu_set_subslices(sseu, s, sseu->subslice_mask,
+					 subslice_mask);
 
 		for (ss = 0; ss < sseu->max_subslices; ss++) {
 			sseu_set_eus(sseu, s, ss,
drivers/gpu/drm/i915/gt/intel_sseu.h +4 -1
index 204ea6709460..b383e7d97554 100644
@@ -32,6 +32,8 @@ struct drm_printer;
 struct sseu_dev_info {
 	u8 slice_mask;
 	u8 subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE];
+	u8 geometry_subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE];
+	u8 compute_subslice_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICE_STRIDE];
 	u8 eu_mask[GEN_MAX_SLICES * GEN_MAX_SUBSLICES * GEN_MAX_EU_STRIDE];
 	u16 eu_total;
 	u8 eu_per_subslice;
@@ -41,6 +43,7 @@ struct sseu_dev_info {
 	u8 has_slice_pg:1;
 	u8 has_subslice_pg:1;
 	u8 has_eu_pg:1;
+	u8 has_compute_dss:1;
 
 	/* Topology fields */
 	u8 max_slices;
@@ -104,7 +107,7 @@ intel_sseu_subslices_per_slice(const struct sseu_dev_info *sseu, u8 slice);
 u32  intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice);
 
 void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,
-			      u32 ss_mask);
+			      u8 *subslice_mask, u32 ss_mask);
 
 void intel_sseu_info_init(struct intel_gt *gt);
 
drivers/gpu/drm/i915/i915_reg.h +2 -1
index 4cabafa1c836..daef4e15a422 100644
@@ -3149,7 +3149,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 
 #define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
 
-#define GEN12_GT_DSS_ENABLE _MMIO(0x913C)
+#define GEN12_GT_GEOMETRY_DSS_ENABLE _MMIO(0x913C)
+#define GEN12_GT_COMPUTE_DSS_ENABLE _MMIO(0x9144)
 
 #define XEHP_EU_ENABLE			_MMIO(0x9134)
 #define XEHP_EU_ENA_MASK		0xFF
include/uapi/drm/i915_drm.h +0 -3
index e334a8b14ef2..dbf5cf4f12bc 100644
@@ -2438,9 +2438,6 @@ struct drm_i915_query {
  *                 Z / 8] >> (Z % 8)) & 1
  */
 struct drm_i915_query_topology_info {
-	/*
-	 * Unused for now. Must be cleared to zero.
-	 */
 	__u16 flags;
 
 	__u16 max_slices;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#34 lore raw

PATCH v2 19/50 drm/i915/xehpsdv: Define steering tables

In reply to Matt Roper

Define and initialize the MMIO ranges for which XeHP SDV requires MSLICE and LNCF steering.

Bspec: 66534

Cc Tvrtko Ursulin <[email protected]>
Cc Daniele Ceraolo Spurio <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_gt.c          | 19 ++++++++++++++++++-
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 11 +++++++++--
 2 files changed, 27 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/gt/intel_gt.c +18 -1
index f59bcedbb80b..9d1c99c9c0dd 100644
@@ -89,6 +89,20 @@ static const struct intel_mmio_range icl_l3bank_steering_table[] = {
 	{},
 };
 
+static const struct intel_mmio_range xehpsdv_mslice_steering_table[] = {
+	{ 0x004000, 0x004AFF },
+	{ 0x00C800, 0x00CFFF },
+	{ 0x00DD00, 0x00DDFF },
+	{ 0x00E900, 0x00FFFF }, /* 0xEA00 - OxEFFF is unused */
+	{},
+};
+
+static const struct intel_mmio_range xehpsdv_lncf_steering_table[] = {
+	{ 0x00B000, 0x00B0FF },
+	{ 0x00D800, 0x00D8FF },
+	{},
+};
+
 static u16 slicemask(struct intel_gt *gt, int count)
 {
 	u64 dss_mask = intel_sseu_get_subslices(&gt->info.sseu, 0);
@@ -113,7 +127,10 @@ int intel_gt_init_mmio(struct intel_gt *gt)
 			(intel_uncore_read(gt->uncore, GEN10_MIRROR_FUSE3) &
 			 GEN12_MEML3_EN_MASK);
 
-	if (GRAPHICS_VER(gt->i915) >= 11 &&
+	if (IS_XEHPSDV(gt->i915)) {
+		gt->steering_table[MSLICE] = xehpsdv_mslice_steering_table;
+		gt->steering_table[LNCF] = xehpsdv_lncf_steering_table;
+	} else if (GRAPHICS_VER(gt->i915) >= 11 &&
 		   GRAPHICS_VER_FULL(gt->i915) < IP_VER(12, 50)) {
 		gt->steering_table[L3BANK] = icl_l3bank_steering_table;
 		gt->info.l3bank_mask =
drivers/gpu/drm/i915/gt/intel_workarounds.c +9 -2
index 257c13059874..df8892a01412 100644
@@ -996,7 +996,6 @@ icl_wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal)
 	__add_mcr_wa(i915, wal, slice, subslice);
 }
 
-__maybe_unused
 static void
 xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)
 {
@@ -1215,10 +1214,18 @@ dg1_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
 			    VSUNIT_CLKGATE_DIS_TGL);
 }
 
+static void
+xehpsdv_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
+{
+	xehp_init_mcr(&i915->gt, wal);
+}
+
 static void
 gt_init_workarounds(struct drm_i915_private *i915, struct i915_wa_list *wal)
 {
-	if (IS_DG1(i915))
+	if (IS_XEHPSDV(i915))
+		xehpsdv_gt_workarounds_init(i915, wal);
+	else if (IS_DG1(i915))
 		dg1_gt_workarounds_init(i915, wal);
 	else if (IS_TIGERLAKE(i915))
 		tgl_gt_workarounds_init(i915, wal);
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#35 lore raw

PATCH v2 20/50 drm/i915/xehpsdv: Define MOCS table for XeHP SDV

In reply to Matt Roper

From: Lucas De Marchi <[email protected]>

Like DG1, XeHP SDV doesn't have LLC/eDRAM control values due to being a dgfx card. XeHP SDV adds 2 more bits: L3_GLBGO to "push the Go point to memory for L3 destined transaction" and L3_LKP to "enable Lookup for uncacheable accesses".

Bspec: 45101

---
 drivers/gpu/drm/i915/gt/intel_mocs.c | 33 +++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_mocs.c +32 -1
index 17848807f111..0c9d0b936c20 100644
@@ -40,6 +40,8 @@ struct drm_i915_mocs_table {
 #define L3_ESC(value)		((value) << 0)
 #define L3_SCC(value)		((value) << 1)
 #define _L3_CACHEABILITY(value)	((value) << 4)
+#define L3_GLBGO(value)		((value) << 6)
+#define L3_LKUP(value)		((value) << 7)
 
 /* Helper defines */
 #define GEN9_NUM_MOCS_ENTRIES	64  /* 63-64 are reserved, but configured. */
@@ -314,6 +316,31 @@ static const struct drm_i915_mocs_entry dg1_mocs_table[] = {
 	MOCS_ENTRY(63, 0, L3_1_UC),
 };
 
+static const struct drm_i915_mocs_entry xehpsdv_mocs_table[] = {
+	/* wa_1608975824 */
+	MOCS_ENTRY(0, 0, L3_3_WB | L3_LKUP(1)),
+
+	/* UC - Coherent; GO:L3 */
+	MOCS_ENTRY(1, 0, L3_1_UC | L3_LKUP(1)),
+	/* UC - Coherent; GO:Memory */
+	MOCS_ENTRY(2, 0, L3_1_UC | L3_GLBGO(1) | L3_LKUP(1)),
+	/* UC - Non-Coherent; GO:Memory */
+	MOCS_ENTRY(3, 0, L3_1_UC | L3_GLBGO(1)),
+	/* UC - Non-Coherent; GO:L3 */
+	MOCS_ENTRY(4, 0, L3_1_UC),
+
+	/* WB */
+	MOCS_ENTRY(5, 0, L3_3_WB | L3_LKUP(1)),
+
+	/* HW Reserved - SW program but never use. */
+	MOCS_ENTRY(48, 0, L3_3_WB | L3_LKUP(1)),
+	MOCS_ENTRY(49, 0, L3_1_UC | L3_LKUP(1)),
+	MOCS_ENTRY(60, 0, L3_1_UC),
+	MOCS_ENTRY(61, 0, L3_1_UC),
+	MOCS_ENTRY(62, 0, L3_1_UC),
+	MOCS_ENTRY(63, 0, L3_1_UC),
+};
+
 enum {
 	HAS_GLOBAL_MOCS = BIT(0),
 	HAS_ENGINE_MOCS = BIT(1),
@@ -340,7 +367,11 @@ static unsigned int get_mocs_settings(const struct drm_i915_private *i915,
 {
 	unsigned int flags;
 
-	if (IS_DG1(i915)) {
+	if (IS_XEHPSDV(i915)) {
+		table->size = ARRAY_SIZE(xehpsdv_mocs_table);
+		table->table = xehpsdv_mocs_table;
+		table->n_entries = GEN9_NUM_MOCS_ENTRIES;
+	} else if (IS_DG1(i915)) {
 		table->size = ARRAY_SIZE(dg1_mocs_table);
 		table->table = dg1_mocs_table;
 		table->n_entries = GEN9_NUM_MOCS_ENTRIES;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#36 lore raw

PATCH v2 21/50 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP

In reply to Matt Roper

From: Lucas De Marchi <[email protected]>

Instead of maintaining the same if ladder in 3 different places, add a function to read RP_STATE_CAP.

---
 drivers/gpu/drm/i915/gt/debugfs_gt_pm.c |  8 +++-----
 drivers/gpu/drm/i915/gt/intel_rps.c     | 17 ++++++++++++-----
 drivers/gpu/drm/i915/gt/intel_rps.h     |  1 +
 drivers/gpu/drm/i915/i915_debugfs.c     |  8 +++-----
 4 files changed, 19 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c +3 -5
index 4270b5a34a83..1061a62bdfce 100644
@@ -309,13 +309,11 @@ static int frequency_show(struct seq_file *m, void *unused)
 		int max_freq;
 
 		rp_state_limits = intel_uncore_read(uncore, GEN6_RP_STATE_LIMITS);
-		if (IS_GEN9_LP(i915)) {
-			rp_state_cap = intel_uncore_read(uncore, BXT_RP_STATE_CAP);
+		rp_state_cap = intel_rps_read_state_cap(rps);
+		if (IS_GEN9_LP(i915))
 			gt_perf_status = intel_uncore_read(uncore, BXT_GT_PERF_STATUS);
-		} else {
-			rp_state_cap = intel_uncore_read(uncore, GEN6_RP_STATE_CAP);
+		else
 			gt_perf_status = intel_uncore_read(uncore, GEN6_GT_PERF_STATUS);
-		}
 
 		/* RPSTAT1 is in the GT power well */
 		intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
drivers/gpu/drm/i915/gt/intel_rps.c +12 -5
index 06e9a8ed4e03..490bc1513480 100644
@@ -975,20 +975,16 @@ int intel_rps_set(struct intel_rps *rps, u8 val)
 static void gen6_rps_init(struct intel_rps *rps)
 {
 	struct drm_i915_private *i915 = rps_to_i915(rps);
-	struct intel_uncore *uncore = rps_to_uncore(rps);
+	u32 rp_state_cap = intel_rps_read_state_cap(rps);
 
 	/* All of these values are in units of 50MHz */
 
 	/* static values from HW: RP0 > RP1 > RPn (min_freq) */
 	if (IS_GEN9_LP(i915)) {
-		u32 rp_state_cap = intel_uncore_read(uncore, BXT_RP_STATE_CAP);
-
 		rps->rp0_freq = (rp_state_cap >> 16) & 0xff;
 		rps->rp1_freq = (rp_state_cap >>  8) & 0xff;
 		rps->min_freq = (rp_state_cap >>  0) & 0xff;
 	} else {
-		u32 rp_state_cap = intel_uncore_read(uncore, GEN6_RP_STATE_CAP);
-
 		rps->rp0_freq = (rp_state_cap >>  0) & 0xff;
 		rps->rp1_freq = (rp_state_cap >>  8) & 0xff;
 		rps->min_freq = (rp_state_cap >> 16) & 0xff;
@@ -1936,6 +1932,17 @@ u32 intel_rps_read_actual_frequency(struct intel_rps *rps)
 	return freq;
 }
 
+u32 intel_rps_read_state_cap(struct intel_rps *rps)
+{
+	struct drm_i915_private *i915 = rps_to_i915(rps);
+	struct intel_uncore *uncore = rps_to_uncore(rps);
+
+	if (IS_GEN9_LP(i915))
+		return intel_uncore_read(uncore, BXT_RP_STATE_CAP);
+	else
+		return intel_uncore_read(uncore, GEN6_RP_STATE_CAP);
+}
+
 /* External interface for intel_ips.ko */
 
 static struct drm_i915_private __rcu *ips_mchdev;
drivers/gpu/drm/i915/gt/intel_rps.h +1 -0
index 1d2cfc98b510..6e06dd61f818 100644
@@ -31,6 +31,7 @@ int intel_gpu_freq(struct intel_rps *rps, int val);
 int intel_freq_opcode(struct intel_rps *rps, int val);
 u32 intel_rps_get_cagf(struct intel_rps *rps, u32 rpstat1);
 u32 intel_rps_read_actual_frequency(struct intel_rps *rps);
+u32 intel_rps_read_state_cap(struct intel_rps *rps);
 
 void gen5_rps_irq_handler(struct intel_rps *rps);
 void gen6_rps_irq_handler(struct intel_rps *rps, u32 pm_iir);
drivers/gpu/drm/i915/i915_debugfs.c +3 -5
index 0529576f069c..37056b2c044a 100644
@@ -420,13 +420,11 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		int max_freq;
 
 		rp_state_limits = intel_uncore_read(&dev_priv->uncore, GEN6_RP_STATE_LIMITS);
-		if (IS_GEN9_LP(dev_priv)) {
-			rp_state_cap = intel_uncore_read(&dev_priv->uncore, BXT_RP_STATE_CAP);
+		rp_state_cap = intel_rps_read_state_cap(rps);
+		if (IS_GEN9_LP(dev_priv))
 			gt_perf_status = intel_uncore_read(&dev_priv->uncore, BXT_GT_PERF_STATUS);
-		} else {
-			rp_state_cap = intel_uncore_read(&dev_priv->uncore, GEN6_RP_STATE_CAP);
+		else
 			gt_perf_status = intel_uncore_read(&dev_priv->uncore, GEN6_GT_PERF_STATUS);
-		}
 
 		/* RPSTAT1 is in the GT power well */
 		intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#37 lore raw

PATCH v2 22/50 drm/i915/xehpsdv: Read correct RP_STATE_CAP register

In reply to Matt Roper

The RP_STATE_CAP register is no longer part of the MCHBAR on XEHPSDV; this register is now a per-tile register at GTTMMADDR offset 0x250014.

---
 drivers/gpu/drm/i915/gt/intel_rps.c | 4 +++-
 drivers/gpu/drm/i915/i915_reg.h     | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_rps.c +3 -1
index 490bc1513480..8e7b70248392 100644
@@ -1937,7 +1937,9 @@ u32 intel_rps_read_state_cap(struct intel_rps *rps)
 	struct drm_i915_private *i915 = rps_to_i915(rps);
 	struct intel_uncore *uncore = rps_to_uncore(rps);
 
-	if (IS_GEN9_LP(i915))
+	if (IS_XEHPSDV(i915))
+		return intel_uncore_read(uncore, XEHPSDV_RP_STATE_CAP);
+	else if (IS_GEN9_LP(i915))
 		return intel_uncore_read(uncore, BXT_RP_STATE_CAP);
 	else
 		return intel_uncore_read(uncore, GEN6_RP_STATE_CAP);
drivers/gpu/drm/i915/i915_reg.h +1 -0
index daef4e15a422..37c1b5c4c681 100644
@@ -4110,6 +4110,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN6_RP_STATE_CAP	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
 #define BXT_RP_STATE_CAP        _MMIO(0x138170)
 #define GEN9_RP_STATE_LIMITS	_MMIO(0x138148)
+#define XEHPSDV_RP_STATE_CAP	_MMIO(0x250014)
 
 /*
  * Logical Context regs
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#38 lore raw

PATCH v2 23/50 drm/i915/dg2: add DG2 platform info

In reply to Matt Roper

DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics. There are two variants (treated as subplatforms in the code): DG2-G10 and DG2-G11 that require independent programming in some areas (e.g., workarounds).

Bspec: 44472, 44474, 46197, 48028, 48077

Cc Anusha Srivatsa <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h          | 27 ++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_pci.c          | 16 ++++++++++++++
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  5 +++++
 drivers/gpu/drm/i915/intel_step.c        | 20 +++++++++++++++++-
 5 files changed, 68 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +27 -0
index 24181aa36efb..714b0bd1ae0e 100644
@@ -1454,6 +1454,11 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_S)
 #define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_P)
 #define IS_XEHPSDV(dev_priv) IS_PLATFORM(dev_priv, INTEL_XEHPSDV)
+#define IS_DG2(dev_priv)	IS_PLATFORM(dev_priv, INTEL_DG2)
+#define IS_DG2_G10(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_DG2, INTEL_SUBPLATFORM_G10)
+#define IS_DG2_G11(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_DG2, INTEL_SUBPLATFORM_G11)
 #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \
 				    (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00)
 #define IS_BDW_ULT(dev_priv) \
@@ -1615,6 +1620,28 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_XEHPSDV_GT_STEP(p, since, until) \
 	(IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until))
 
+/*
+ * DG2 hardware steppings are a bit unusual.  The hardware design was forked
+ * to create two variants (G10 and G11) which have distinct workaround sets.
+ * The G11 fork of the DG2 design resets the GT stepping back to "A0" for its
+ * first iteration, even though it's more similar to a G10 B0 stepping in terms
+ * of functionality and workarounds.  However the display stepping does not
+ * reset in the same manner --- a specific stepping like "B0" has a consistent
+ * meaning regardless of whether it belongs to a G10 or G11 DG2.
+ *
+ * TLDR:  All GT workarounds and stepping-specific logic must be applied in
+ * relation to a specific subplatform (G10 or G11), whereas display workarounds
+ * and stepping-specific logic will be applied with a general DG2-wide stepping
+ * number.
+ */
+#define IS_DG2_GT_STEP(__i915, variant, since, until) \
+	(IS_SUBPLATFORM(__i915, INTEL_DG2, INTEL_SUBPLATFORM_##variant) && \
+	 IS_GT_STEP(__i915, since, until))
+
+#define IS_DG2_DISP_STEP(__i915, since, until) \
+	(IS_DG2(__i915) && \
+	 IS_DISPLAY_STEP(__i915, since, until))
+
 #define IS_LP(dev_priv)		(INTEL_INFO(dev_priv)->is_lp)
 #define IS_GEN9_LP(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && IS_LP(dev_priv))
 #define IS_GEN9_BC(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && !IS_LP(dev_priv))
drivers/gpu/drm/i915/i915_pci.c +16 -0
index 07c57d8f3a9c..7106b81b1e71 100644
@@ -1040,6 +1040,22 @@ static const struct intel_device_info xehpsdv_info = {
 	.require_force_probe = 1,
 };
 
+__maybe_unused
+static const struct intel_device_info dg2_info = {
+	XE_HP_FEATURES,
+	XE_HPM_FEATURES,
+	XE_LPD_FEATURES,
+	DGFX_FEATURES,
+	.graphics_rel = 55,
+	.media_rel = 55,
+	PLATFORM(INTEL_DG2),
+	.platform_engine_mask =
+		BIT(RCS0) | BIT(BCS0) |
+		BIT(VECS0) | BIT(VECS1) |
+		BIT(VCS0) | BIT(VCS2),
+	.require_force_probe = 1,
+};
+
 #undef PLATFORM
 
 /*
drivers/gpu/drm/i915/intel_device_info.c +1 -0
index b750f9ded9d5..822a26b574a9 100644
@@ -69,6 +69,7 @@ static const char * const platform_names[] = {
 	PLATFORM_NAME(ALDERLAKE_S),
 	PLATFORM_NAME(ALDERLAKE_P),
 	PLATFORM_NAME(XEHPSDV),
+	PLATFORM_NAME(DG2),
 };
 #undef PLATFORM_NAME
 
drivers/gpu/drm/i915/intel_device_info.h +5 -0
index 690a0d2812bb..2177372f9ac3 100644
@@ -89,6 +89,7 @@ enum intel_platform {
 	INTEL_ALDERLAKE_S,
 	INTEL_ALDERLAKE_P,
 	INTEL_XEHPSDV,
+	INTEL_DG2,
 	INTEL_MAX_PLATFORMS
 };
 
@@ -107,6 +108,10 @@ enum intel_platform {
 /* CNL/ICL */
 #define INTEL_SUBPLATFORM_PORTF	(0)
 
+/* DG2 */
+#define INTEL_SUBPLATFORM_G10	0
+#define INTEL_SUBPLATFORM_G11	1
+
 enum intel_ppgtt_type {
 	INTEL_PPGTT_NONE = I915_GEM_PPGTT_NONE,
 	INTEL_PPGTT_ALIASING = I915_GEM_PPGTT_ALIASING,
drivers/gpu/drm/i915/intel_step.c +19 -1
index a27a41caed70..aded5c9769f5 100644
@@ -61,6 +61,18 @@ static const struct intel_step_info xehpsdv_revid_step_tbl[] = {
 	[0x8] = { .gt_step = STEP_C0 },
 };
 
+static const struct intel_step_info dg2_g10_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_A0 },
+	[0x1] = { .gt_step = STEP_A1, .display_step = STEP_A0 },
+	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_B0 },
+	[0x8] = { .gt_step = STEP_C0, .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info dg2_g11_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_B0 },
+	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_C0 },
+};
+
 void intel_step_init(struct drm_i915_private *i915)
 {
 	const struct intel_step_info *revids = NULL;
@@ -68,7 +80,13 @@ void intel_step_init(struct drm_i915_private *i915)
 	int revid = INTEL_REVID(i915);
 	struct intel_step_info step = {};
 
-	if (IS_XEHPSDV(i915)) {
+	if (IS_DG2_G10(i915)) {
+		revids = dg2_g10_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g10_revid_step_tbl);
+	} else if (IS_DG2_G11(i915)) {
+		revids = dg2_g11_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g11_revid_step_tbl);
+	} else if (IS_XEHPSDV(i915)) {
 		revids = xehpsdv_revid_step_tbl;
 		size = ARRAY_SIZE(xehpsdv_revid_step_tbl);
 	} else if (IS_ALDERLAKE_P(i915)) {
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 23/50
#39 lore raw

Re: [Intel-gfx] [PATCH v2 23/50] drm/i915/dg2: add DG2 platform info

Quoted 4 lines · Matt Roper

DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics. There are two variants (treated as subplatforms in the code): DG2-G10 and DG2-G11 that require independent programming in some areas (e.g., workarounds).

Quoted 147 lines

Bspec: 44472, 44474, 46197, 48028, 48077

Cc Anusha Srivatsa <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.h          | 27 ++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_pci.c          | 16 ++++++++++++++
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  5 +++++
 drivers/gpu/drm/i915/intel_step.c        | 20 +++++++++++++++++-
 5 files changed, 68 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +27 -0
index 24181aa36efb..714b0bd1ae0e 100644
@@ -1454,6 +1454,11 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_S)
 #define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, INTEL_ALDERLAKE_P)
 #define IS_XEHPSDV(dev_priv) IS_PLATFORM(dev_priv, INTEL_XEHPSDV)
+#define IS_DG2(dev_priv)	IS_PLATFORM(dev_priv, INTEL_DG2)
+#define IS_DG2_G10(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_DG2, INTEL_SUBPLATFORM_G10)
+#define IS_DG2_G11(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_DG2, INTEL_SUBPLATFORM_G11)
 #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \
 				    (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00)
 #define IS_BDW_ULT(dev_priv) \
@@ -1615,6 +1620,28 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_XEHPSDV_GT_STEP(p, since, until) \
 	(IS_XEHPSDV(p) && IS_GT_STEP(__i915, since, until))
 
+/*
+ * DG2 hardware steppings are a bit unusual.  The hardware design was forked
+ * to create two variants (G10 and G11) which have distinct workaround sets.
+ * The G11 fork of the DG2 design resets the GT stepping back to "A0" for its
+ * first iteration, even though it's more similar to a G10 B0 stepping in terms
+ * of functionality and workarounds.  However the display stepping does not
+ * reset in the same manner --- a specific stepping like "B0" has a consistent
+ * meaning regardless of whether it belongs to a G10 or G11 DG2.
+ *
+ * TLDR:  All GT workarounds and stepping-specific logic must be applied in
+ * relation to a specific subplatform (G10 or G11), whereas display workarounds
+ * and stepping-specific logic will be applied with a general DG2-wide stepping
+ * number.
+ */
+#define IS_DG2_GT_STEP(__i915, variant, since, until) \
+	(IS_SUBPLATFORM(__i915, INTEL_DG2, INTEL_SUBPLATFORM_##variant) && \
+	 IS_GT_STEP(__i915, since, until))
+
+#define IS_DG2_DISP_STEP(__i915, since, until) \
+	(IS_DG2(__i915) && \
+	 IS_DISPLAY_STEP(__i915, since, until))
+
 #define IS_LP(dev_priv)		(INTEL_INFO(dev_priv)->is_lp)
 #define IS_GEN9_LP(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && IS_LP(dev_priv))
 #define IS_GEN9_BC(dev_priv)	(GRAPHICS_VER(dev_priv) == 9 && !IS_LP(dev_priv))
drivers/gpu/drm/i915/i915_pci.c +16 -0
index 07c57d8f3a9c..7106b81b1e71 100644
@@ -1040,6 +1040,22 @@ static const struct intel_device_info xehpsdv_info = {
 	.require_force_probe = 1,
 };
 
+__maybe_unused
+static const struct intel_device_info dg2_info = {
+	XE_HP_FEATURES,
+	XE_HPM_FEATURES,
+	XE_LPD_FEATURES,
+	DGFX_FEATURES,
+	.graphics_rel = 55,
+	.media_rel = 55,
+	PLATFORM(INTEL_DG2),
+	.platform_engine_mask =
+		BIT(RCS0) | BIT(BCS0) |
+		BIT(VECS0) | BIT(VECS1) |
+		BIT(VCS0) | BIT(VCS2),
+	.require_force_probe = 1,
+};
+
 #undef PLATFORM
 
 /*
drivers/gpu/drm/i915/intel_device_info.c +1 -0
index b750f9ded9d5..822a26b574a9 100644
@@ -69,6 +69,7 @@ static const char * const platform_names[] = {
 	PLATFORM_NAME(ALDERLAKE_S),
 	PLATFORM_NAME(ALDERLAKE_P),
 	PLATFORM_NAME(XEHPSDV),
+	PLATFORM_NAME(DG2),
 };
 #undef PLATFORM_NAME
 
drivers/gpu/drm/i915/intel_device_info.h +5 -0
index 690a0d2812bb..2177372f9ac3 100644
@@ -89,6 +89,7 @@ enum intel_platform {
 	INTEL_ALDERLAKE_S,
 	INTEL_ALDERLAKE_P,
 	INTEL_XEHPSDV,
+	INTEL_DG2,
 	INTEL_MAX_PLATFORMS
 };
 
@@ -107,6 +108,10 @@ enum intel_platform {
 /* CNL/ICL */
 #define INTEL_SUBPLATFORM_PORTF	(0)
 
+/* DG2 */
+#define INTEL_SUBPLATFORM_G10	0
+#define INTEL_SUBPLATFORM_G11	1
+
 enum intel_ppgtt_type {
 	INTEL_PPGTT_NONE = I915_GEM_PPGTT_NONE,
 	INTEL_PPGTT_ALIASING = I915_GEM_PPGTT_ALIASING,
drivers/gpu/drm/i915/intel_step.c +12 -1
index a27a41caed70..aded5c9769f5 100644
@@ -61,6 +61,18 @@ static const struct intel_step_info xehpsdv_revid_step_tbl[] = {
 	[0x8] = { .gt_step = STEP_C0 },
 };
 
+static const struct intel_step_info dg2_g10_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_A0 },
+	[0x1] = { .gt_step = STEP_A1, .display_step = STEP_A0 },
+	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_B0 },
+	[0x8] = { .gt_step = STEP_C0, .display_step = STEP_C0 },
+};
+
+static const struct intel_step_info dg2_g11_revid_step_tbl[] = {
+	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_B0 },
+	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_C0 },
+};
+
 void intel_step_init(struct drm_i915_private *i915)
 {
 	const struct intel_step_info *revids = NULL;
@@ -68,7 +80,13 @@ void intel_step_init(struct drm_i915_private *i915)
 	int revid = INTEL_REVID(i915);
 	struct intel_step_info step = {};
 
-	if (IS_XEHPSDV(i915)) {

drivers/gpu/drm/i915/intel_step.c void intel_step_init(struct drm_i915_private *i915) · line 92

Quoted 10 lines
drivers/gpu/drm/i915/intel_step.c +7 -0
+	if (IS_DG2_G10(i915)) {
+		revids = dg2_g10_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g10_revid_step_tbl);
+	} else if (IS_DG2_G11(i915)) {
+		revids = dg2_g11_revid_step_tbl;
+		size = ARRAY_SIZE(dg2_g11_revid_step_tbl);
+	} else if (IS_XEHPSDV(i915)) {
 		revids = xehpsdv_revid_step_tbl;
 		size = ARRAY_SIZE(xehpsdv_revid_step_tbl);
 	} else if (IS_ALDERLAKE_P(i915)) {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#40 lore raw

PATCH v2 24/50 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV

In reply to Matt Roper

DG2 supports compute DSS and has the same maximum number of DSS and EU as XeHP SDV.

---
 drivers/gpu/drm/i915/gt/intel_sseu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +1 -1
index 5d3b8dff464c..eaff221db5b0 100644
@@ -171,7 +171,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 	 * across the entire device. Then calculate out the DSS for each
 	 * workload type within that software slice.
 	 */
-	if (IS_XEHPSDV(gt->i915)) {
+	if (IS_DG2(gt->i915) || IS_XEHPSDV(gt->i915)) {
 		intel_sseu_set_info(sseu, 1, 32, 16);
 		sseu->has_compute_dss = 1;
 	} else {
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 24/50
#41 lore raw

Re: [Intel-gfx] [PATCH v2 24/50] drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV

-caz

Quoted 18 lines · Matt Roper

DG2 supports compute DSS and has the same maximum number of DSS and EU
as XeHP SDV.

---
 drivers/gpu/drm/i915/gt/intel_sseu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +0 -0
index 5d3b8dff464c..eaff221db5b0 100644
@@ -171,7 +171,7 @@ static void gen12_sseu_info_init(struct intel_gt
 *gt)
 	 * across the entire device. Then calculate out the DSS for

each

drivers/gpu/drm/i915/gt/intel_sseu.c static void gen12_sseu_info_init(struct intel_gt *gt) · line 177

Quoted 7 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +1 -1
 	 * workload type within that software slice.
 	 */
-	if (IS_XEHPSDV(gt->i915)) {
+	if (IS_DG2(gt->i915) || IS_XEHPSDV(gt->i915)) {
 		intel_sseu_set_info(sseu, 1, 32, 16);
 		sseu->has_compute_dss = 1;
 	} else {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v2 24/50
#42 lore raw

Re: [Intel-gfx] [PATCH v2 24/50] drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV

In reply to Matt Roper
Quoted 2 lines · Matt Roper

DG2 supports compute DSS and has the same maximum number of DSS and EU as XeHP SDV.

Quoted 11 lines
---
 drivers/gpu/drm/i915/gt/intel_sseu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_sseu.c +0 -0
index 5d3b8dff464c..eaff221db5b0 100644

drivers/gpu/drm/i915/gt/intel_sseu.c static void gen12_sseu_info_init(struct intel_gt *gt) · line 177

Quoted 8 lines
drivers/gpu/drm/i915/gt/intel_sseu.c +1 -1
@@ -171,7 +171,7 @@ static void gen12_sseu_info_init(struct intel_gt *gt)
 	 * across the entire device. Then calculate out the DSS for each
 	 * workload type within that software slice.
 	 */
-	if (IS_XEHPSDV(gt->i915)) {
+	if (IS_DG2(gt->i915) || IS_XEHPSDV(gt->i915)) {
 		intel_sseu_set_info(sseu, 1, 32, 16);
 		sseu->has_compute_dss = 1;
 	} else {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#43 lore raw

PATCH v2 25/50 drm/i915/dg2: Add forcewake table

In reply to Matt Roper

The DG2 forcewake table is very similar to the one used by XeHP SDV (and both platforms are even presented as a single table in the bspec). For the most part DG2 starts using a few additional ranges that were 'reserved' on XeHP SDV and stops using some others. However there is a single range (0xd800-0xd87f) that needs to be handled differently between the two platforms (it needs GT wake on XeHP SDV, but render wake on DG2) so unless we want to wake both domains (which could waste power) or define new types of forcewake domains for this special case we need to have separate tables for the two platforms. Let's define the ranges for both platforms with a parameterized macro so that we don't actually need to duplicate everything in the code.

It should be fine for DG2 to re-use the Xe_HP shadow register list so we can continue to use the 'xehpsdv' MMIO write functions and don't need to spin up a separate DG2 instance.

Bspec: 66534

Cc Daniele Ceraolo Spurio <[email protected]>
---
 drivers/gpu/drm/i915/intel_uncore.c | 305 +++++++++++++++-------------
 1 file changed, 168 insertions(+), 137 deletions(-)
drivers/gpu/drm/i915/intel_uncore.c +168 -137
index 8cf53f54559d..6b38bc2811c1 100644
@@ -1317,143 +1317,170 @@ static const struct intel_forcewake_range __gen12_fw_ranges[] = {
 		0x1d3f00 - 0x1d3fff: VD2 */
 };
 
-/* *Must* be sorted by offset ranges! See intel_fw_table_check(). */
-static const struct intel_forcewake_range __xehp_fw_ranges[] = {
-	GEN_FW_RANGE(0x0, 0x1fff, 0), /*
-		  0x0 -  0xaff: reserved
-		0xb00 - 0x1fff: always on */
-	GEN_FW_RANGE(0x2000, 0x26ff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x2700, 0x4aff, FORCEWAKE_GT),
-	GEN_FW_RANGE(0x4b00, 0x51ff, 0), /*
-		0x4b00 - 0x4fff: reserved
-		0x5000 - 0x51ff: always on */
-	GEN_FW_RANGE(0x5200, 0x7fff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x8000, 0x813f, FORCEWAKE_GT),
-	GEN_FW_RANGE(0x8140, 0x815f, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x8160, 0x81ff, 0), /*
-		0x8160 - 0x817f: reserved
-		0x8180 - 0x81ff: always on */
-	GEN_FW_RANGE(0x8200, 0x82ff, FORCEWAKE_GT),
-	GEN_FW_RANGE(0x8300, 0x84ff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x8500, 0x94cf, FORCEWAKE_GT), /*
-		0x8500 - 0x87ff: gt
-		0x8800 - 0x8fff: reserved
-		0x9000 - 0x947f: gt
-		0x9480 - 0x94cf: reserved */
-	GEN_FW_RANGE(0x94d0, 0x955f, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0x9560, 0x97ff, 0), /*
-		0x9560 - 0x95ff: always on
-		0x9600 - 0x97ff: reserved */
-	GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /*
-		0x9800 - 0xb4ff: gt
-		0xb500 - 0xbfff: reserved
-		0xc000 - 0xcfff: gt */
-	GEN_FW_RANGE(0xd000, 0xd7ff, 0),
-	GEN_FW_RANGE(0xd800, 0xdbff, FORCEWAKE_GT),
-	GEN_FW_RANGE(0xdc00, 0xdcff, FORCEWAKE_RENDER),
-	GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /*
-		0xdd00 - 0xddff: gt
-		0xde00 - 0xde7f: reserved */
-	GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /*
-		0xde80 - 0xdfff: render
-		0xe000 - 0xe0ff: reserved
-		0xe100 - 0xe8ff: render */
-	GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /*
-		0xe900 - 0xe9ff: gt
-		0xea00 - 0xefff: reserved
-		0xf000 - 0xffff: gt */
-	GEN_FW_RANGE(0x10000, 0x13fff, 0), /*
-		0x10000 - 0x11fff: reserved
-		0x12000 - 0x127ff: always on
-		0x12800 - 0x13fff: reserved */
-	GEN_FW_RANGE(0x14000, 0x141ff, FORCEWAKE_MEDIA_VDBOX0),
-	GEN_FW_RANGE(0x14200, 0x143ff, FORCEWAKE_MEDIA_VDBOX2),
-	GEN_FW_RANGE(0x14400, 0x145ff, FORCEWAKE_MEDIA_VDBOX4),
-	GEN_FW_RANGE(0x14600, 0x147ff, FORCEWAKE_MEDIA_VDBOX6),
-	GEN_FW_RANGE(0x14800, 0x1ffff, FORCEWAKE_RENDER), /*
-		0x14800 - 0x14fff: render
-		0x15000 - 0x16dff: reserved
-		0x16e00 - 0x1ffff: render */
-	GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /*
-		0x20000 - 0x20fff: VD0
-		0x21000 - 0x21fff: reserved */
-	GEN_FW_RANGE(0x22000, 0x23fff, FORCEWAKE_GT),
-	GEN_FW_RANGE(0x24000, 0x2417f, 0), /*
-		0x24000 - 0x2407f: always on
-		0x24080 - 0x2417f: reserved */
-	GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /*
-		0x24180 - 0x241ff: gt
-		0x24200 - 0x249ff: reserved */
-	GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /*
-		0x24a00 - 0x24a7f: render
-		0x24a80 - 0x251ff: reserved */
-	GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /*
-		0x25200 - 0x252ff: gt
-		0x25300 - 0x25fff: reserved */
-	GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /*
-		0x26000 - 0x27fff: render
-		0x28000 - 0x29fff: reserved
-		0x2a000 - 0x2ffff: undocumented */
-	GEN_FW_RANGE(0x30000, 0x3ffff, FORCEWAKE_GT),
-	GEN_FW_RANGE(0x40000, 0x1bffff, 0),
-	GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /*
-		0x1c0000 - 0x1c2bff: VD0
-		0x1c2c00 - 0x1c2cff: reserved
-		0x1c2d00 - 0x1c2dff: VD0
-		0x1c2e00 - 0x1c3eff: reserved
-		0x1c3f00 - 0x1c3fff: VD0 */
-	GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /*
-		0x1c4000 - 0x1c6bff: VD1
-		0x1c6c00 - 0x1c6cff: reserved
-		0x1c6d00 - 0x1c6dff: VD1
-		0x1c6e00 - 0x1c7fff: reserved */
-	GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /*
-		0x1c8000 - 0x1ca0ff: VE0
-		0x1ca100 - 0x1cbfff: reserved */
-	GEN_FW_RANGE(0x1cc000, 0x1ccfff, FORCEWAKE_MEDIA_VDBOX0),
-	GEN_FW_RANGE(0x1cd000, 0x1cdfff, FORCEWAKE_MEDIA_VDBOX2),
-	GEN_FW_RANGE(0x1ce000, 0x1cefff, FORCEWAKE_MEDIA_VDBOX4),
-	GEN_FW_RANGE(0x1cf000, 0x1cffff, FORCEWAKE_MEDIA_VDBOX6),
-	GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /*
-		0x1d0000 - 0x1d2bff: VD2
-		0x1d2c00 - 0x1d2cff: reserved
-		0x1d2d00 - 0x1d2dff: VD2
-		0x1d2e00 - 0x1d3eff: reserved
-		0x1d3f00 - 0x1d3fff: VD2 */
-	GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /*
-		0x1d4000 - 0x1d6bff: VD3
-		0x1d6c00 - 0x1d6cff: reserved
-		0x1d6d00 - 0x1d6dff: VD3
-		0x1d6e00 - 0x1d7fff: reserved */
-	GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /*
-		0x1d8000 - 0x1da0ff: VE1
-		0x1da100 - 0x1dffff: reserved */
-	GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /*
-		0x1e0000 - 0x1e2bff: VD4
-		0x1e2c00 - 0x1e2cff: reserved
-		0x1e2d00 - 0x1e2dff: VD4
-		0x1e2e00 - 0x1e3eff: reserved
-		0x1e3f00 - 0x1e3fff: VD4 */
-	GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /*
-		0x1e4000 - 0x1e6bff: VD5
-		0x1e6c00 - 0x1e6cff: reserved
-		0x1e6d00 - 0x1e6dff: VD5
-		0x1e6e00 - 0x1e7fff: reserved */
-	GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /*
-		0x1e8000 - 0x1ea0ff: VE2
-		0x1ea100 - 0x1effff: reserved */
-	GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /*
-		0x1f0000 - 0x1f2bff: VD6
-		0x1f2c00 - 0x1f2cff: reserved
-		0x1f2d00 - 0x1f2dff: VD6
-		0x1f2e00 - 0x1f3eff: reserved
-		0x1f3f00 - 0x1f3fff: VD6 */
-	GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /*
-		0x1f4000 - 0x1f6bff: VD7
-		0x1f6c00 - 0x1f6cff: reserved
-		0x1f6d00 - 0x1f6dff: VD7
-		0x1f6e00 - 0x1f7fff: reserved */
+/*
+ * Graphics IP version 12.55 brings a slight change to the 0xd800 range,
+ * switching it from the GT domain to the render domain.
+ *
+ * *Must* be sorted by offset ranges! See intel_fw_table_check().
+ */
+#define XEHP_FWRANGES(FW_RANGE_D800)					\
+	GEN_FW_RANGE(0x0, 0x1fff, 0), /*					\
+		  0x0 -  0xaff: reserved					\
+		0xb00 - 0x1fff: always on */					\
+	GEN_FW_RANGE(0x2000, 0x26ff, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0x2700, 0x4aff, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0x4b00, 0x51ff, 0), /*					\
+		0x4b00 - 0x4fff: reserved					\
+		0x5000 - 0x51ff: always on */					\
+	GEN_FW_RANGE(0x5200, 0x7fff, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0x8000, 0x813f, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0x8140, 0x815f, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0x8160, 0x81ff, 0), /*					\
+		0x8160 - 0x817f: reserved					\
+		0x8180 - 0x81ff: always on */					\
+	GEN_FW_RANGE(0x8200, 0x82ff, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0x8300, 0x84ff, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0x8500, 0x8cff, FORCEWAKE_GT), /*				\
+		0x8500 - 0x87ff: gt						\
+		0x8800 - 0x8c7f: reserved					\
+		0x8c80 - 0x8cff: gt (DG2 only) */				\
+	GEN_FW_RANGE(0x8d00, 0x8fff, FORCEWAKE_RENDER), /*			\
+		0x8d00 - 0x8dff: render (DG2 only)				\
+		0x8e00 - 0x8fff: reserved */					\
+	GEN_FW_RANGE(0x9000, 0x94cf, FORCEWAKE_GT), /*				\
+		0x9000 - 0x947f: gt						\
+		0x9480 - 0x94cf: reserved */					\
+	GEN_FW_RANGE(0x94d0, 0x955f, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0x9560, 0x967f, 0), /*					\
+		0x9560 - 0x95ff: always on					\
+		0x9600 - 0x967f: reserved */					\
+	GEN_FW_RANGE(0x9680, 0x97ff, FORCEWAKE_RENDER), /*			\
+		0x9680 - 0x96ff: render (DG2 only)				\
+		0x9700 - 0x97ff: reserved */					\
+	GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /*				\
+		0x9800 - 0xb4ff: gt						\
+		0xb500 - 0xbfff: reserved					\
+		0xc000 - 0xcfff: gt */						\
+	GEN_FW_RANGE(0xd000, 0xd7ff, 0),					\
+	GEN_FW_RANGE(0xd800, 0xd87f, FW_RANGE_D800),			\
+	GEN_FW_RANGE(0xd880, 0xdbff, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0xdc00, 0xdcff, FORCEWAKE_RENDER),				\
+	GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /*				\
+		0xdd00 - 0xddff: gt						\
+		0xde00 - 0xde7f: reserved */					\
+	GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /*			\
+		0xde80 - 0xdfff: render						\
+		0xe000 - 0xe0ff: reserved					\
+		0xe100 - 0xe8ff: render */					\
+	GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /*				\
+		0xe900 - 0xe9ff: gt						\
+		0xea00 - 0xefff: reserved					\
+		0xf000 - 0xffff: gt */						\
+	GEN_FW_RANGE(0x10000, 0x12fff, 0), /*					\
+		0x10000 - 0x11fff: reserved					\
+		0x12000 - 0x127ff: always on					\
+		0x12800 - 0x12fff: reserved */					\
+	GEN_FW_RANGE(0x13000, 0x131ff, FORCEWAKE_MEDIA_VDBOX0), /* DG2 only */	\
+	GEN_FW_RANGE(0x13200, 0x13fff, FORCEWAKE_MEDIA_VDBOX2), /*		\
+		0x13200 - 0x133ff: VD2 (DG2 only)				\
+		0x13400 - 0x13fff: reserved */					\
+	GEN_FW_RANGE(0x14000, 0x141ff, FORCEWAKE_MEDIA_VDBOX0), /* XEHPSDV only */	\
+	GEN_FW_RANGE(0x14200, 0x143ff, FORCEWAKE_MEDIA_VDBOX2), /* XEHPSDV only */	\
+	GEN_FW_RANGE(0x14400, 0x145ff, FORCEWAKE_MEDIA_VDBOX4), /* XEHPSDV only */	\
+	GEN_FW_RANGE(0x14600, 0x147ff, FORCEWAKE_MEDIA_VDBOX6), /* XEHPSDV only */	\
+	GEN_FW_RANGE(0x14800, 0x14fff, FORCEWAKE_RENDER),			\
+	GEN_FW_RANGE(0x15000, 0x16dff, FORCEWAKE_GT), /*			\
+		0x15000 - 0x15fff: gt (DG2 only)				\
+		0x16000 - 0x16dff: reserved */					\
+	GEN_FW_RANGE(0x16e00, 0x1ffff, FORCEWAKE_RENDER),			\
+	GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /*		\
+		0x20000 - 0x20fff: VD0 (XEHPSDV only)				\
+		0x21000 - 0x21fff: reserved */					\
+	GEN_FW_RANGE(0x22000, 0x23fff, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0x24000, 0x2417f, 0), /*					\
+		0x24000 - 0x2407f: always on					\
+		0x24080 - 0x2417f: reserved */					\
+	GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /*			\
+		0x24180 - 0x241ff: gt						\
+		0x24200 - 0x249ff: reserved */					\
+	GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /*			\
+		0x24a00 - 0x24a7f: render					\
+		0x24a80 - 0x251ff: reserved */					\
+	GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /*			\
+		0x25200 - 0x252ff: gt						\
+		0x25300 - 0x25fff: reserved */					\
+	GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /*			\
+		0x26000 - 0x27fff: render					\
+		0x28000 - 0x29fff: reserved					\
+		0x2a000 - 0x2ffff: undocumented */				\
+	GEN_FW_RANGE(0x30000, 0x3ffff, FORCEWAKE_GT),				\
+	GEN_FW_RANGE(0x40000, 0x1bffff, 0),					\
+	GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /*		\
+		0x1c0000 - 0x1c2bff: VD0					\
+		0x1c2c00 - 0x1c2cff: reserved					\
+		0x1c2d00 - 0x1c2dff: VD0					\
+		0x1c2e00 - 0x1c3eff: VD0 (DG2 only)				\
+		0x1c3f00 - 0x1c3fff: VD0 */					\
+	GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /*		\
+		0x1c4000 - 0x1c6bff: VD1					\
+		0x1c6c00 - 0x1c6cff: reserved					\
+		0x1c6d00 - 0x1c6dff: VD1					\
+		0x1c6e00 - 0x1c7fff: reserved */				\
+	GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /*		\
+		0x1c8000 - 0x1ca0ff: VE0					\
+		0x1ca100 - 0x1cbfff: reserved */				\
+	GEN_FW_RANGE(0x1cc000, 0x1ccfff, FORCEWAKE_MEDIA_VDBOX0),		\
+	GEN_FW_RANGE(0x1cd000, 0x1cdfff, FORCEWAKE_MEDIA_VDBOX2),		\
+	GEN_FW_RANGE(0x1ce000, 0x1cefff, FORCEWAKE_MEDIA_VDBOX4),		\
+	GEN_FW_RANGE(0x1cf000, 0x1cffff, FORCEWAKE_MEDIA_VDBOX6),		\
+	GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /*		\
+		0x1d0000 - 0x1d2bff: VD2					\
+		0x1d2c00 - 0x1d2cff: reserved					\
+		0x1d2d00 - 0x1d2dff: VD2					\
+		0x1d2e00 - 0x1d3dff: VD2 (DG2 only)				\
+		0x1d3e00 - 0x1d3eff: reserved					\
+		0x1d3f00 - 0x1d3fff: VD2 */					\
+	GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /*		\
+		0x1d4000 - 0x1d6bff: VD3					\
+		0x1d6c00 - 0x1d6cff: reserved					\
+		0x1d6d00 - 0x1d6dff: VD3					\
+		0x1d6e00 - 0x1d7fff: reserved */				\
+	GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /*		\
+		0x1d8000 - 0x1da0ff: VE1					\
+		0x1da100 - 0x1dffff: reserved */				\
+	GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /*		\
+		0x1e0000 - 0x1e2bff: VD4					\
+		0x1e2c00 - 0x1e2cff: reserved					\
+		0x1e2d00 - 0x1e2dff: VD4					\
+		0x1e2e00 - 0x1e3eff: reserved					\
+		0x1e3f00 - 0x1e3fff: VD4 */					\
+	GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /*		\
+		0x1e4000 - 0x1e6bff: VD5					\
+		0x1e6c00 - 0x1e6cff: reserved					\
+		0x1e6d00 - 0x1e6dff: VD5					\
+		0x1e6e00 - 0x1e7fff: reserved */				\
+	GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /*		\
+		0x1e8000 - 0x1ea0ff: VE2					\
+		0x1ea100 - 0x1effff: reserved */				\
+	GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /*		\
+		0x1f0000 - 0x1f2bff: VD6					\
+		0x1f2c00 - 0x1f2cff: reserved					\
+		0x1f2d00 - 0x1f2dff: VD6					\
+		0x1f2e00 - 0x1f3eff: reserved					\
+		0x1f3f00 - 0x1f3fff: VD6 */					\
+	GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /*		\
+		0x1f4000 - 0x1f6bff: VD7					\
+		0x1f6c00 - 0x1f6cff: reserved					\
+		0x1f6d00 - 0x1f6dff: VD7					\
+		0x1f6e00 - 0x1f7fff: reserved */				\
 	GEN_FW_RANGE(0x1f8000, 0x1fa0ff, FORCEWAKE_MEDIA_VEBOX3),
+
+static const struct intel_forcewake_range __xehp_fw_ranges[] = {
+	XEHP_FWRANGES(FORCEWAKE_GT)
+};
+
+static const struct intel_forcewake_range __dg2_fw_ranges[] = {
+	XEHP_FWRANGES(FORCEWAKE_RENDER)
 };
 
 static void
@@ -2084,7 +2111,11 @@ static int uncore_forcewake_init(struct intel_uncore *uncore)
 		return ret;
 	forcewake_early_sanitize(uncore, 0);
 
-	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50)) {
+	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 55)) {
+		ASSIGN_FW_DOMAINS_TABLE(uncore, __dg2_fw_ranges);
+		ASSIGN_WRITE_MMIO_VFUNCS(uncore, xehp_fwtable);
+		ASSIGN_READ_MMIO_VFUNCS(uncore, gen11_fwtable);
+	} else if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50)) {
 		ASSIGN_FW_DOMAINS_TABLE(uncore, __xehp_fw_ranges);
 		ASSIGN_WRITE_MMIO_VFUNCS(uncore, xehp_fwtable);
 		ASSIGN_READ_MMIO_VFUNCS(uncore, gen11_fwtable);
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#44 lore raw

PATCH v2 26/50 drm/i915/dg2: Update LNCF steering ranges

In reply to Matt Roper

DG2's replicated register ranges are almost the same at XeHP SDV with the exception of one LNCF sub-range that switches to gslice steering. We can re-use the XeHP SDV mslice steering table and just provide a DG2-specific LNCF steering table.

Bspec: 66534

Cc Daniele Ceraolo Spurio <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_gt.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_gt.c +10 -1
index 9d1c99c9c0dd..d640fd37792f 100644
@@ -103,6 +103,12 @@ static const struct intel_mmio_range xehpsdv_lncf_steering_table[] = {
 	{},
 };
 
+static const struct intel_mmio_range dg2_lncf_steering_table[] = {
+	{ 0x00B000, 0x00B0FF },
+	{ 0x00D880, 0x00D8FF },
+	{},
+};
+
 static u16 slicemask(struct intel_gt *gt, int count)
 {
 	u64 dss_mask = intel_sseu_get_subslices(&gt->info.sseu, 0);
@@ -127,7 +133,10 @@ int intel_gt_init_mmio(struct intel_gt *gt)
 			(intel_uncore_read(gt->uncore, GEN10_MIRROR_FUSE3) &
 			 GEN12_MEML3_EN_MASK);
 
-	if (IS_XEHPSDV(gt->i915)) {
+	if (IS_DG2(gt->i915)) {
+		gt->steering_table[MSLICE] = xehpsdv_mslice_steering_table;
+		gt->steering_table[LNCF] = dg2_lncf_steering_table;
+	} else if (IS_XEHPSDV(gt->i915)) {
 		gt->steering_table[MSLICE] = xehpsdv_mslice_steering_table;
 		gt->steering_table[LNCF] = xehpsdv_lncf_steering_table;
 	} else if (GRAPHICS_VER(gt->i915) >= 11 &&
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#45 lore raw

PATCH v2 27/50 drm/i915/dg2: Add SQIDI steering

In reply to Matt Roper

Although DG2_G10 platforms will always have all SQIDI's present and don't need steering for registers in a SQIDI MMIO range, this isn't true for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.

We handle SQIDI ranges a bit differently from other types of explicit steering. The SQIDI ranges belong to either the MCFG unit or the SF unit, both of which have their own dedicated steering registers and do not use the typical 0xFDC steering control that all other types of ranges use. Thus we only need to worry about picking a valid initial value for the MCFG and SF steering registers (0xFD0 and 0xFD8 resepectively) at driver init; they won't change after we set them up so we don't need to worry about re-steering them explicitly at runtime.

Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV, while only values of 2 and 3 are valid for DG2-G11, we'll just initialize the MCFG and SF steering registers to a constant value of "2" for all XeHP-based platforms for simplicity --- that will work in all cases.

Bspec: 66534

Cc Radhakrishna Sripada <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 28 +++++++++++++++++----
 drivers/gpu/drm/i915/i915_reg.h             |  2 ++
 2 files changed, 25 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +23 -5
index df8892a01412..a57a9eca369d 100644
@@ -951,17 +951,24 @@ cfl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
 		    GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS);
 }
 
-static void __add_mcr_wa(struct drm_i915_private *i915, struct i915_wa_list *wal,
-			 unsigned slice, unsigned subslice)
+static void __set_mcr_steering(struct i915_wa_list *wal,
+			       i915_reg_t steering_reg,
+			       unsigned int slice, unsigned int subslice)
 {
 	u32 mcr, mcr_mask;
 
 	mcr = GEN11_MCR_SLICE(slice) | GEN11_MCR_SUBSLICE(subslice);
 	mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK;
 
-	drm_dbg(&i915->drm, "MCR slice/subslice = %x\n", mcr);
+	wa_write_clr_set(wal, steering_reg, mcr_mask, mcr);
+}
+
+static void __add_mcr_wa(struct drm_i915_private *i915, struct i915_wa_list *wal,
+			 unsigned int slice, unsigned int subslice)
+{
+	drm_dbg(&i915->drm, "MCR slice=0x%x, subslice=0x%x\n", slice, subslice);
 
-	wa_write_clr_set(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr);
+	__set_mcr_steering(wal, GEN8_MCR_SELECTOR, slice, subslice);
 }
 
 static void
@@ -1015,7 +1022,6 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)
 	 * - L3 Bank (fusable)
 	 * - MSLICE (fusable)
 	 * - LNCF (sub-unit within mslice; always present if mslice is present)
-	 * - SQIDI (always on)
 	 *
 	 * We'll do our default/implicit steering based on GSLICE (in the
 	 * sliceid field) and DSS (in the subsliceid field).  If we can
@@ -1065,6 +1071,18 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)
 	WARN_ON(dss_mask >> (slice * GEN_DSS_PER_GSLICE) == 0);
 
 	__add_mcr_wa(i915, wal, slice, subslice);
+
+	/*
+	 * SQIDI ranges are special because they use different steering
+	 * registers than everything else we work with.  On XeHP SDV and
+	 * DG2-G10, any value in the steering registers will work fine since
+	 * all instances are present, but DG2-G11 only has SQIDI instances at
+	 * ID's 2 and 3, so we need to steer to one of those.  For simplicity
+	 * we'll just steer to a hardcoded "2" since that value will work
+	 * everywhere.
+	 */
+	__set_mcr_steering(wal, MCFG_MCR_SELECTOR, 0, 2);
+	__set_mcr_steering(wal, SF_MCR_SELECTOR, 0, 2);
 }
 
 static void
drivers/gpu/drm/i915/i915_reg.h +2 -0
index 37c1b5c4c681..f9c9edb53ec5 100644
@@ -2686,6 +2686,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN12_SC_INSTDONE_EXTRA2	_MMIO(0x7108)
 #define GEN7_SAMPLER_INSTDONE	_MMIO(0xe160)
 #define GEN7_ROW_INSTDONE	_MMIO(0xe164)
+#define MCFG_MCR_SELECTOR		_MMIO(0xfd0)
+#define SF_MCR_SELECTOR			_MMIO(0xfd8)
 #define GEN8_MCR_SELECTOR		_MMIO(0xfdc)
 #define   GEN8_MCR_SLICE(slice)		(((slice) & 3) << 26)
 #define   GEN8_MCR_SLICE_MASK		GEN8_MCR_SLICE(3)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#46 lore raw

PATCH v2 28/50 drm/i915/dg2: Add new LRI reg offsets

In reply to Matt Roper

From: Akeem G Abodunrin <[email protected]>

New LRI register offsets were introduced for DG2, this patch adds those extra registers, and create new register table for setting offsets to compare with HW generated context image - especially for gt_lrc test. Also updates general purpose register with scratch offset for DG2, in order to use it for live_lrc_fixed selftest.

Cc Chris P Wilson <[email protected]>
Cc Prathap Kumar Valsan <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_lrc.c | 85 ++++++++++++++++++++++++++++-
 1 file changed, 83 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_lrc.c +83 -2
index c3f5bec8ae15..1b7e75e4c011 100644
@@ -226,6 +226,40 @@ static const u8 gen12_xcs_offsets[] = {
 	END
 };
 
+static const u8 dg2_xcs_offsets[] = {
+	NOP(1),
+	LRI(15, POSTED),
+	REG16(0x244),
+	REG(0x034),
+	REG(0x030),
+	REG(0x038),
+	REG(0x03c),
+	REG(0x168),
+	REG(0x140),
+	REG(0x110),
+	REG(0x1c0),
+	REG(0x1c4),
+	REG(0x1c8),
+	REG(0x180),
+	REG16(0x2b4),
+	REG(0x120),
+	REG(0x124),
+
+	NOP(1),
+	LRI(9, POSTED),
+	REG16(0x3a8),
+	REG16(0x28c),
+	REG16(0x288),
+	REG16(0x284),
+	REG16(0x280),
+	REG16(0x27c),
+	REG16(0x278),
+	REG16(0x274),
+	REG16(0x270),
+
+	END
+};
+
 static const u8 gen8_rcs_offsets[] = {
 	NOP(1),
 	LRI(14, POSTED),
@@ -525,6 +559,49 @@ static const u8 xehp_rcs_offsets[] = {
 	END
 };
 
+static const u8 dg2_rcs_offsets[] = {
+	NOP(1),
+	LRI(15, POSTED),
+	REG16(0x244),
+	REG(0x034),
+	REG(0x030),
+	REG(0x038),
+	REG(0x03c),
+	REG(0x168),
+	REG(0x140),
+	REG(0x110),
+	REG(0x1c0),
+	REG(0x1c4),
+	REG(0x1c8),
+	REG(0x180),
+	REG16(0x2b4),
+	REG(0x120),
+	REG(0x124),
+
+	NOP(1),
+	LRI(9, POSTED),
+	REG16(0x3a8),
+	REG16(0x28c),
+	REG16(0x288),
+	REG16(0x284),
+	REG16(0x280),
+	REG16(0x27c),
+	REG16(0x278),
+	REG16(0x274),
+	REG16(0x270),
+
+	LRI(3, POSTED),
+	REG(0x1b0),
+	REG16(0x5a8),
+	REG16(0x5ac),
+
+	NOP(6),
+	LRI(1, 0),
+	REG(0x0c8),
+
+	END
+};
+
 #undef END
 #undef REG16
 #undef REG
@@ -543,7 +620,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		   !intel_engine_has_relative_mmio(engine));
 
 	if (engine->class == RENDER_CLASS) {
-		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
+			return dg2_rcs_offsets;
+		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
 			return xehp_rcs_offsets;
 		else if (GRAPHICS_VER(engine->i915) >= 12)
 			return gen12_rcs_offsets;
@@ -554,7 +633,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		else
 			return gen8_rcs_offsets;
 	} else {
-		if (GRAPHICS_VER(engine->i915) >= 12)
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
+			return dg2_xcs_offsets;
+		else if (GRAPHICS_VER(engine->i915) >= 12)
 			return gen12_xcs_offsets;
 		else if (GRAPHICS_VER(engine->i915) >= 9)
 			return gen9_xcs_offsets;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#47 lore raw

PATCH v2 29/50 drm/i915/dg2: Maintain backward-compatible nested batch behavior

In reply to Matt Roper

For tgl+, the per-context setting of MI_MODE[12] determines whether the bits of a nested MI_BATCH_BUFFER_START instruction should be interpreted in the traditional manner or whether they should instead use a new tgl+ meaning that breaks backward compatibility, but allows nesting into 3rd-level batchbuffers. For previous platforms, the hardware default for this register bit is to maintain backward-compatible behavior unless a context intentionally opts into the new behavior; however Xe_HPG flips the hardware default behavior.

From a SW perspective, we want to maintain the backward-compatible behavior for userspace, so we'll apply a fake workaround to set it back to the legacy behavior on platforms where the hardware default is to break compatibility. At the moment there is no Linux userspace that utilizes third-level batchbuffers, so this will avoid userspace from needing to make any changes. using the legacy meaning is the correct thing to do. If/when we have userspace consumers that want to utilize third-level batch nesting, we can provide a context parameter to allow them to opt-in.

Bspec: 45974, 45718

Cc John Harrison <[email protected]>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 39 +++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h             |  1 +
 2 files changed, 38 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +37 -2
index a57a9eca369d..f00a41e4d792 100644
@@ -693,6 +693,37 @@ static void dg1_ctx_workarounds_init(struct intel_engine_cs *engine,
 		     DG1_HZ_READ_SUPPRESSION_OPTIMIZATION_DISABLE);
 }
 
+static void fakewa_disable_nestedbb_mode(struct intel_engine_cs *engine,
+					 struct i915_wa_list *wal)
+{
+	/*
+	 * This is a "fake" workaround defined by software to ensure we
+	 * maintain reliable, backward-compatible behavior for userspace with
+	 * regards to how nested MI_BATCH_BUFFER_START commands are handled.
+	 *
+	 * The per-context setting of MI_MODE[12] determines whether the bits
+	 * of a nested MI_BATCH_BUFFER_START instruction should be interpreted
+	 * in the traditional manner or whether they should instead use a new
+	 * tgl+ meaning that breaks backward compatibility, but allows nesting
+	 * into 3rd-level batchbuffers.  When this new capability was first
+	 * added in TGL, it remained off by default unless a context
+	 * intentionally opted in to the new behavior.  However Xe_HPG now
+	 * flips this on by default and requires that we explicitly opt out if
+	 * we don't want the new behavior.
+	 *
+	 * From a SW perspective, we want to maintain the backward-compatible
+	 * behavior for userspace, so we'll apply a fake workaround to set it
+	 * back to the legacy behavior on platforms where the hardware default
+	 * is to break compatibility.  At the moment there is no Linux
+	 * userspace that utilizes third-level batchbuffers, so this will avoid
+	 * userspace from needing to make any changes.  using the legacy
+	 * meaning is the correct thing to do.  If/when we have userspace
+	 * consumers that want to utilize third-level batch nesting, we can
+	 * provide a context parameter to allow them to opt-in.
+	 */
+	wa_masked_dis(wal, RING_MI_MODE(engine->mmio_base), TGL_NESTED_BB_EN);
+}
+
 static void
 __intel_engine_init_ctx_wa(struct intel_engine_cs *engine,
 			   struct i915_wa_list *wal,
@@ -700,11 +731,15 @@ __intel_engine_init_ctx_wa(struct intel_engine_cs *engine,
 {
 	struct drm_i915_private *i915 = engine->i915;
 
+	wa_init_start(wal, name, engine->name);
+
+	/* Applies to all engines */
+	if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 55))
+		fakewa_disable_nestedbb_mode(engine, wal);
+
 	if (engine->class != RENDER_CLASS)
 		return;
 
-	wa_init_start(wal, name, engine->name);
-
 	if (IS_DG1(i915))
 		dg1_ctx_workarounds_init(engine, wal);
 	else if (GRAPHICS_VER(i915) == 12)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index f9c9edb53ec5..57ed9254bfb6 100644
@@ -2821,6 +2821,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define MI_MODE		_MMIO(0x209c)
 # define VS_TIMER_DISPATCH				(1 << 6)
 # define MI_FLUSH_ENABLE				(1 << 12)
+# define TGL_NESTED_BB_EN				(1 << 12)
 # define ASYNC_FLIP_PERF_DISABLE			(1 << 14)
 # define MODE_IDLE					(1 << 9)
 # define STOP_RING					(1 << 8)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#48 lore raw

PATCH v2 30/50 drm/i915/dg2: Report INSTDONE_GEOM values in error state

In reply to Matt Roper

Xe_HPG adds some additional INSTDONE_GEOM debug registers; the Mesa team has indicated that having these reported in the error state would be useful for debugging GPU hangs. These registers are replicated per-DSS with gslice steering.

---
 drivers/gpu/drm/i915/gt/intel_engine_cs.c    |  7 +++++++
 drivers/gpu/drm/i915/gt/intel_engine_types.h |  3 +++
 drivers/gpu/drm/i915/i915_gpu_error.c        | 10 ++++++++--
 drivers/gpu/drm/i915/i915_reg.h              |  1 +
 4 files changed, 19 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gt/intel_engine_cs.c +7 -0
index 54a762356ca3..f6fc92456084 100644
@@ -1221,6 +1221,13 @@ void intel_engine_get_instdone(const struct intel_engine_cs *engine,
 							  GEN7_ROW_INSTDONE);
 			}
 		}
+
+		if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 55)) {
+			for_each_instdone_gslice_dss_xehp(i915, sseu, iter, slice, subslice)
+				instdone->geom_svg[slice][subslice] =
+					read_subslice_reg(engine, slice, subslice,
+							  XEHPG_INSTDONE_GEOM_SVG);
+		}
 	} else if (GRAPHICS_VER(i915) >= 7) {
 		instdone->instdone =
 			intel_uncore_read(uncore, RING_INSTDONE(mmio_base));
drivers/gpu/drm/i915/gt/intel_engine_types.h +3 -0
index 9d7cf9a062dc..c9417b9d5f90 100644
@@ -80,6 +80,9 @@ struct intel_instdone {
 	u32 slice_common_extra[2];
 	u32 sampler[GEN_MAX_GSLICES][I915_MAX_SUBSLICES];
 	u32 row[GEN_MAX_GSLICES][I915_MAX_SUBSLICES];
+
+	/* Added in XeHPG */
+	u32 geom_svg[GEN_MAX_GSLICES][I915_MAX_SUBSLICES];
 };
 
 /*
drivers/gpu/drm/i915/i915_gpu_error.c +8 -2
index c1e744b5ab47..4de7edc451ef 100644
@@ -431,6 +431,7 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,
 	const struct sseu_dev_info *sseu = &ee->engine->gt->info.sseu;
 	int slice;
 	int subslice;
+	int iter;
 
 	err_printf(m, "  INSTDONE: 0x%08x\n",
 		   ee->instdone.instdone);
@@ -445,8 +446,6 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,
 		return;
 
 	if (GRAPHICS_VER_FULL(m->i915) >= IP_VER(12, 50)) {
-		int iter;
-
 		for_each_instdone_gslice_dss_xehp(m->i915, sseu, iter, slice, subslice)
 			err_printf(m, "  SAMPLER_INSTDONE[%d][%d]: 0x%08x\n",
 				   slice, subslice,
@@ -471,6 +470,13 @@ static void error_print_instdone(struct drm_i915_error_state_buf *m,
 	if (GRAPHICS_VER(m->i915) < 12)
 		return;
 
+	if (GRAPHICS_VER_FULL(m->i915) >= IP_VER(12, 55)) {
+		for_each_instdone_gslice_dss_xehp(m->i915, sseu, iter, slice, subslice)
+			err_printf(m, "  GEOM_SVGUNIT_INSTDONE[%d][%d]: 0x%08x\n",
+				   slice, subslice,
+				   ee->instdone.geom_svg[slice][subslice]);
+	}
+
 	err_printf(m, "  SC_INSTDONE_EXTRA: 0x%08x\n",
 		   ee->instdone.slice_common_extra[0]);
 	err_printf(m, "  SC_INSTDONE_EXTRA2: 0x%08x\n",
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 57ed9254bfb6..0dc798bc1f19 100644
@@ -2686,6 +2686,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define GEN12_SC_INSTDONE_EXTRA2	_MMIO(0x7108)
 #define GEN7_SAMPLER_INSTDONE	_MMIO(0xe160)
 #define GEN7_ROW_INSTDONE	_MMIO(0xe164)
+#define XEHPG_INSTDONE_GEOM_SVG		_MMIO(0x666c)
 #define MCFG_MCR_SELECTOR		_MMIO(0xfd0)
 #define SF_MCR_SELECTOR			_MMIO(0xfd8)
 #define GEN8_MCR_SELECTOR		_MMIO(0xfdc)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#49 lore raw

PATCH v2 31/50 drm/i915/dg2: Define MOCS table for DG2

In reply to Matt Roper

Bspec: 45101, 45427

Cc Ramalingam C <[email protected]>(v5)
---
 drivers/gpu/drm/i915/gt/intel_mocs.c | 35 +++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gt/intel_mocs.c +34 -1
index 0c9d0b936c20..d22ca8212092 100644
@@ -341,6 +341,30 @@ static const struct drm_i915_mocs_entry xehpsdv_mocs_table[] = {
 	MOCS_ENTRY(63, 0, L3_1_UC),
 };
 
+static const struct drm_i915_mocs_entry dg2_mocs_table[] = {
+	/* UC - Coherent; GO:L3 */
+	MOCS_ENTRY(0, 0, L3_1_UC | L3_LKUP(1)),
+	/* UC - Coherent; GO:Memory */
+	MOCS_ENTRY(1, 0, L3_1_UC | L3_GLBGO(1) | L3_LKUP(1)),
+	/* UC - Non-Coherent; GO:Memory */
+	MOCS_ENTRY(2, 0, L3_1_UC | L3_GLBGO(1)),
+
+	/* WB - LC */
+	MOCS_ENTRY(3, 0, L3_3_WB | L3_LKUP(1)),
+};
+
+static const struct drm_i915_mocs_entry dg2_mocs_table_g10_ax[] = {
+	/* Wa_14011441408: Set Go to Memory for MOCS#0 */
+	MOCS_ENTRY(0, 0, L3_1_UC | L3_GLBGO(1) | L3_LKUP(1)),
+	/* UC - Coherent; GO:Memory */
+	MOCS_ENTRY(1, 0, L3_1_UC | L3_GLBGO(1) | L3_LKUP(1)),
+	/* UC - Non-Coherent; GO:Memory */
+	MOCS_ENTRY(2, 0, L3_1_UC | L3_GLBGO(1)),
+
+	/* WB - LC */
+	MOCS_ENTRY(3, 0, L3_3_WB | L3_LKUP(1)),
+};
+
 enum {
 	HAS_GLOBAL_MOCS = BIT(0),
 	HAS_ENGINE_MOCS = BIT(1),
@@ -367,7 +391,16 @@ static unsigned int get_mocs_settings(const struct drm_i915_private *i915,
 {
 	unsigned int flags;
 
-	if (IS_XEHPSDV(i915)) {
+	if (IS_DG2(i915)) {
+		if (IS_DG2_GT_STEP(i915, G10, STEP_A0, (STEP_B0 - 1))) {
+			table->size = ARRAY_SIZE(dg2_mocs_table_g10_ax);
+			table->table = dg2_mocs_table_g10_ax;
+		} else {
+			table->size = ARRAY_SIZE(dg2_mocs_table);
+			table->table = dg2_mocs_table;
+		}
+		table->n_entries = GEN9_NUM_MOCS_ENTRIES;
+	} else if (IS_XEHPSDV(i915)) {
 		table->size = ARRAY_SIZE(xehpsdv_mocs_table);
 		table->table = xehpsdv_mocs_table;
 		table->n_entries = GEN9_NUM_MOCS_ENTRIES;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#50 lore raw

PATCH v2 32/50 drm/i915/dg2: Add fake PCH

In reply to Matt Roper

As with DG1, DG2 has an ICL-style south display interface provided on the same PCI device. Add a fake PCH to ensure DG2 takes the appropriate codepaths for south display handling.

Bspec: 54871, 50062, 49961, 53673

---
 drivers/gpu/drm/i915/i915_irq.c  | 2 +-
 drivers/gpu/drm/i915/intel_pch.c | 3 +++
 drivers/gpu/drm/i915/intel_pch.h | 2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_irq.c +1 -1
index 61dceb2a17c1..e2171bd2820e 100644
@@ -207,7 +207,7 @@ static void intel_hpd_init_pins(struct drm_i915_private *dev_priv)
 	    (!HAS_PCH_SPLIT(dev_priv) || HAS_PCH_NOP(dev_priv)))
 		return;
 
-	if (HAS_PCH_DG1(dev_priv))
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
 		hpd->pch_hpd = hpd_sde_dg1;
 	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
 		hpd->pch_hpd = hpd_icp;
drivers/gpu/drm/i915/intel_pch.c +3 -0
index 4e92ae19189e..cc44164e242b 100644
@@ -211,6 +211,9 @@ void intel_detect_pch(struct drm_i915_private *dev_priv)
 	if (IS_DG1(dev_priv)) {
 		dev_priv->pch_type = PCH_DG1;
 		return;
+	} else if (IS_DG2(dev_priv)) {
+		dev_priv->pch_type = PCH_DG2;
+		return;
 	}
 
 	/*
drivers/gpu/drm/i915/intel_pch.h +2 -0
index e2f3f30c6445..7c0d83d292dc 100644
@@ -30,6 +30,7 @@ enum intel_pch {
 
 	/* Fake PCHs, functionality handled on the same PCI dev */
 	PCH_DG1 = 1024,
+	PCH_DG2,
 };
 
 #define INTEL_PCH_DEVICE_ID_MASK		0xff80
@@ -62,6 +63,7 @@ enum intel_pch {
 
 #define INTEL_PCH_TYPE(dev_priv)		((dev_priv)->pch_type)
 #define INTEL_PCH_ID(dev_priv)			((dev_priv)->pch_id)
+#define HAS_PCH_DG2(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_DG2)
 #define HAS_PCH_ADP(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_ADP)
 #define HAS_PCH_DG1(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_DG1)
 #define HAS_PCH_JSP(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_JSP)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 32/50
#51 lore raw

Re: [Intel-gfx] [PATCH v2 32/50] drm/i915/dg2: Add fake PCH

Quoted 4 lines · Matt Roper

As with DG1, DG2 has an ICL-style south display interface provided on the same PCI device. Add a fake PCH to ensure DG2 takes the appropriate codepaths for south display handling.

Quoted 52 lines

Bspec: 54871, 50062, 49961, 53673

---
 drivers/gpu/drm/i915/i915_irq.c  | 2 +-
 drivers/gpu/drm/i915/intel_pch.c | 3 +++
 drivers/gpu/drm/i915/intel_pch.h | 2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_irq.c +1 -1
index 61dceb2a17c1..e2171bd2820e 100644
@@ -207,7 +207,7 @@ static void intel_hpd_init_pins(struct drm_i915_private *dev_priv)
 	    (!HAS_PCH_SPLIT(dev_priv) || HAS_PCH_NOP(dev_priv)))
 		return;
 
-	if (HAS_PCH_DG1(dev_priv))
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
 		hpd->pch_hpd = hpd_sde_dg1;
 	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
 		hpd->pch_hpd = hpd_icp;
drivers/gpu/drm/i915/intel_pch.c +3 -0
index 4e92ae19189e..cc44164e242b 100644
@@ -211,6 +211,9 @@ void intel_detect_pch(struct drm_i915_private *dev_priv)
 	if (IS_DG1(dev_priv)) {
 		dev_priv->pch_type = PCH_DG1;
 		return;
+	} else if (IS_DG2(dev_priv)) {
+		dev_priv->pch_type = PCH_DG2;
+		return;
 	}
 
 	/*
drivers/gpu/drm/i915/intel_pch.h +1 -0
index e2f3f30c6445..7c0d83d292dc 100644
@@ -30,6 +30,7 @@ enum intel_pch {
 
 	/* Fake PCHs, functionality handled on the same PCI dev */
 	PCH_DG1 = 1024,
+	PCH_DG2,
 };
 
 #define INTEL_PCH_DEVICE_ID_MASK		0xff80

drivers/gpu/drm/i915/intel_pch.h enum intel_pch { · line 69

Quoted 7 lines
drivers/gpu/drm/i915/intel_pch.h +1 -0
@@ -62,6 +63,7 @@ enum intel_pch {
 
 #define INTEL_PCH_TYPE(dev_priv)		((dev_priv)->pch_type)
 #define INTEL_PCH_ID(dev_priv)			((dev_priv)->pch_id)
+#define HAS_PCH_DG2(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_DG2)
 #define HAS_PCH_ADP(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_ADP)
 #define HAS_PCH_DG1(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_DG1)
 #define HAS_PCH_JSP(dev_priv)			(INTEL_PCH_TYPE(dev_priv) == PCH_JSP)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#52 lore raw

PATCH v2 33/50 drm/i915/dg2: Add cdclk table and reference clock

In reply to Matt Roper

Note that DG2 only has a single possible refclk frequency (38.4 MHz).

Bspec: 54034

---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 24 ++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_cdclk.c +22 -2
index 71067a62264d..28ef6cbcb402 100644
@@ -1290,6 +1290,18 @@ static const struct intel_cdclk_vals adlp_cdclk_table[] = {
 	{}
 };
 
+static const struct intel_cdclk_vals dg2_cdclk_table[] = {
+	{ .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio =  9 },
+	{ .refclk = 38400, .cdclk = 179200, .divider = 3, .ratio = 14 },
+	{ .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 },
+	{ .refclk = 38400, .cdclk = 192000, .divider = 3, .ratio = 15 },
+	{ .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 },
+	{ .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 },
+	{ .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 },
+	{ .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 },
+	{}
+};
+
 static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
 {
 	const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
@@ -1408,7 +1420,9 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
 {
 	u32 val, ratio;
 
-	if (DISPLAY_VER(dev_priv) >= 11)
+	if (IS_DG2(dev_priv))
+		cdclk_config->ref = 38400;
+	else if (DISPLAY_VER(dev_priv) >= 11)
 		icl_readout_refclk(dev_priv, cdclk_config);
 	else if (IS_CANNONLAKE(dev_priv))
 		cnl_readout_refclk(dev_priv, cdclk_config);
@@ -2873,7 +2887,13 @@ u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
  */
 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
 {
-	if (IS_ALDERLAKE_P(dev_priv)) {
+	if (IS_DG2(dev_priv)) {
+		dev_priv->display.set_cdclk = bxt_set_cdclk;
+		dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
+		dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
+		dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
+		dev_priv->cdclk.table = dg2_cdclk_table;
+	} else if (IS_ALDERLAKE_P(dev_priv)) {
 		dev_priv->display.set_cdclk = bxt_set_cdclk;
 		dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
 		dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 33/50
#53 lore raw

Re: [Intel-gfx] [PATCH v2 33/50] drm/i915/dg2: Add cdclk table and reference clock

Quoted 18 lines · Matt Roper

Note that DG2 only has a single possible refclk frequency (38.4 MHz).

Bspec: 54034

---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 24 ++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_cdclk.c +0 -0
index 71067a62264d..28ef6cbcb402 100644
@@ -1290,6 +1290,18 @@ static const struct intel_cdclk_vals adlp_cdclk_table[] = {
 	{}
 };
 

drivers/gpu/drm/i915/display/intel_cdclk.c static const struct intel_cdclk_vals adlp_cdclk_table[] = { · line 1302

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_cdclk.c +10 -0
+static const struct intel_cdclk_vals dg2_cdclk_table[] = {
+	{ .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio =  9 },
+	{ .refclk = 38400, .cdclk = 179200, .divider = 3, .ratio = 14 },
+	{ .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 },
+	{ .refclk = 38400, .cdclk = 192000, .divider = 3, .ratio = 15 },
+	{ .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 },
+	{ .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 },
+	{ .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 },
+	{ .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 },
+	{}

Two cdclk entries of this table was dropped in the latest version of spec(179200 and 192000(second)), removing those LGTM.

Quoted 21 lines
drivers/gpu/drm/i915/display/intel_cdclk.c +5 -2
+};
+
 static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
 {
 	const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
@@ -1408,7 +1420,9 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
 {
 	u32 val, ratio;
 
-	if (DISPLAY_VER(dev_priv) >= 11)
+	if (IS_DG2(dev_priv))
+		cdclk_config->ref = 38400;
+	else if (DISPLAY_VER(dev_priv) >= 11)
 		icl_readout_refclk(dev_priv, cdclk_config);
 	else if (IS_CANNONLAKE(dev_priv))
 		cnl_readout_refclk(dev_priv, cdclk_config);
@@ -2873,7 +2887,13 @@ u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
  */
 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
 {
-	if (IS_ALDERLAKE_P(dev_priv)) {

drivers/gpu/drm/i915/display/intel_cdclk.c u32 intel_read_rawclk(struct drm_i915_private *dev_priv) · line 2899

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_cdclk.c +7 -0
+	if (IS_DG2(dev_priv)) {
+		dev_priv->display.set_cdclk = bxt_set_cdclk;
+		dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
+		dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
+		dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
+		dev_priv->cdclk.table = dg2_cdclk_table;
+	} else if (IS_ALDERLAKE_P(dev_priv)) {
 		dev_priv->display.set_cdclk = bxt_set_cdclk;
 		dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
 		dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#54 lore raw

PATCH v2 34/50 drm/i915/dg2: Skip shared DPLL handling

In reply to Matt Roper

DG2 has no shared DPLL's or DDI clock muxing. The Port PLL is embedded within the PHY.

Bspec: 54032
Bspec: 54034

Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c  | 10 +++++++---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |  5 ++++-
 2 files changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -3
index 65ddb6ca16e6..45dc58dedf57 100644
@@ -3474,7 +3474,8 @@ static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
 		 * Enable sequence steps 1-7 on bigjoiner master
 		 */
 		intel_encoders_pre_pll_enable(state, master);
-		intel_enable_shared_dpll(master_crtc_state);
+		if (master_crtc_state->shared_dpll)
+			intel_enable_shared_dpll(master_crtc_state);
 		intel_encoders_pre_enable(state, master);
 
 		/* and DSC on slave */
@@ -8633,10 +8634,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 
 	PIPE_CONF_CHECK_BOOL(double_wide);
 
-	PIPE_CONF_CHECK_P(shared_dpll);
+	if (dev_priv->dpll.mgr)
+		PIPE_CONF_CHECK_P(shared_dpll);
 
 	/* FIXME do the readout properly and get rid of this quirk */
-	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
+	if (dev_priv->dpll.mgr && !PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
 		PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
 		PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
 		PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
@@ -8668,7 +8670,9 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_ssc);
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias);
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias);
+	}
 
+	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
 		PIPE_CONF_CHECK_X(dsi_pll.ctrl);
 		PIPE_CONF_CHECK_X(dsi_pll.div);
 
drivers/gpu/drm/i915/display/intel_dpll_mgr.c +4 -1
index 882bfd499e55..5688d9704636 100644
@@ -4462,7 +4462,10 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	const struct dpll_info *dpll_info;
 	int i;
 
-	if (IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		/* No shared DPLLs on DG2; port PLLs are part of the PHY */
+		dpll_mgr = NULL;
+	else if (IS_ALDERLAKE_P(dev_priv))
 		dpll_mgr = &adlp_pll_mgr;
 	else if (IS_ALDERLAKE_S(dev_priv))
 		dpll_mgr = &adls_pll_mgr;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 34/50
#55 lore raw

Re: [Intel-gfx] [PATCH v2 34/50] drm/i915/dg2: Skip shared DPLL handling

Quoted 5 lines · Matt Roper

DG2 has no shared DPLL's or DDI clock muxing. The Port PLL is embedded within the PHY.

Bspec: 54032
Bspec: 54034

Quoted 51 lines
Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c  | 10 +++++++---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |  5 ++++-
 2 files changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -3
index 65ddb6ca16e6..45dc58dedf57 100644
@@ -3474,7 +3474,8 @@ static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
 		 * Enable sequence steps 1-7 on bigjoiner master
 		 */
 		intel_encoders_pre_pll_enable(state, master);
-		intel_enable_shared_dpll(master_crtc_state);
+		if (master_crtc_state->shared_dpll)
+			intel_enable_shared_dpll(master_crtc_state);
 		intel_encoders_pre_enable(state, master);
 
 		/* and DSC on slave */
@@ -8633,10 +8634,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 
 	PIPE_CONF_CHECK_BOOL(double_wide);
 
-	PIPE_CONF_CHECK_P(shared_dpll);
+	if (dev_priv->dpll.mgr)
+		PIPE_CONF_CHECK_P(shared_dpll);
 
 	/* FIXME do the readout properly and get rid of this quirk */
-	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
+	if (dev_priv->dpll.mgr && !PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
 		PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
 		PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
 		PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
@@ -8668,7 +8670,9 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_ssc);
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias);
 		PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias);
+	}
 
+	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
 		PIPE_CONF_CHECK_X(dsi_pll.ctrl);
 		PIPE_CONF_CHECK_X(dsi_pll.div);
 
drivers/gpu/drm/i915/display/intel_dpll_mgr.c +0 -0
index 882bfd499e55..5688d9704636 100644
@@ -4462,7 +4462,10 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	const struct dpll_info *dpll_info;

drivers/gpu/drm/i915/display/intel_dpll_mgr.c void intel_shared_dpll_init(struct drm_device *dev) · line 4471

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dpll_mgr.c +4 -1
 	int i;
 
-	if (IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		/* No shared DPLLs on DG2; port PLLs are part of the PHY */
+		dpll_mgr = NULL;
+	else if (IS_ALDERLAKE_P(dev_priv))
 		dpll_mgr = &adlp_pll_mgr;
 	else if (IS_ALDERLAKE_S(dev_priv))
 		dpll_mgr = &adls_pll_mgr;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#56 lore raw

PATCH v2 35/50 drm/i915/dg2: Don't wait for AUX power well enable ACKs

In reply to Matt Roper

On DG2 we're supposed to just wait 600us after programming the well before moving on; there won't be an ack from the hardware.

Bspec: 49296

---
 .../gpu/drm/i915/display/intel_display_power.c   | 16 ++++++++++++++++
 .../gpu/drm/i915/display/intel_display_power.h   |  6 ++++++
 2 files changed, 22 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +16 -0
index d92db471411e..04af987f3324 100644
@@ -341,6 +341,17 @@ static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
 {
 	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
 	int pw_idx = power_well->desc->hsw.idx;
+	int enable_delay = power_well->desc->hsw.fixed_enable_delay;
+
+	/*
+	 * For some power wells we're not supposed to watch the status bit for
+	 * an ack, but rather just wait a fixed amount of time and then
+	 * proceed.  This is only used on DG2.
+	 */
+	if (IS_DG2(dev_priv) && enable_delay) {
+		usleep_range(enable_delay, 2 * enable_delay);
+		return;
+	}
 
 	/* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */
 	if (intel_de_wait_for_set(dev_priv, regs->driver,
@@ -4828,6 +4839,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4838,6 +4850,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4848,6 +4861,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_C,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4858,6 +4872,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = XELPD_PW_CTL_IDX_AUX_D,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4878,6 +4893,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
drivers/gpu/drm/i915/display/intel_display_power.h +6 -0
index 4f0917df4375..22367b5cba96 100644
@@ -223,6 +223,12 @@ struct i915_power_well_desc {
 			u8 idx;
 			/* Mask of pipes whose IRQ logic is backed by the pw */
 			u8 irq_pipe_mask;
+			/*
+			 * Instead of waiting for the status bit to ack enables,
+			 * just wait a specific amount of time and then consider
+			 * the well enabled.
+			 */
+			u16 fixed_enable_delay;
 			/* The pw is backing the VGA functionality */
 			bool has_vga:1;
 			bool has_fuses:1;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 35/50
#57 lore raw

Re: [Intel-gfx] [PATCH v2 35/50] drm/i915/dg2: Don't wait for AUX power well enable ACKs

Quoted 3 lines · Matt Roper

On DG2 we're supposed to just wait 600us after programming the well before moving on; there won't be an ack from the hardware.

Quoted 76 lines

Bspec: 49296

---
 .../gpu/drm/i915/display/intel_display_power.c   | 16 ++++++++++++++++
 .../gpu/drm/i915/display/intel_display_power.h   |  6 ++++++
 2 files changed, 22 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +16 -0
index d92db471411e..04af987f3324 100644
@@ -341,6 +341,17 @@ static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
 {
 	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
 	int pw_idx = power_well->desc->hsw.idx;
+	int enable_delay = power_well->desc->hsw.fixed_enable_delay;
+
+	/*
+	 * For some power wells we're not supposed to watch the status bit for
+	 * an ack, but rather just wait a fixed amount of time and then
+	 * proceed.  This is only used on DG2.
+	 */
+	if (IS_DG2(dev_priv) && enable_delay) {
+		usleep_range(enable_delay, 2 * enable_delay);
+		return;
+	}
 
 	/* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */
 	if (intel_de_wait_for_set(dev_priv, regs->driver,
@@ -4828,6 +4839,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4838,6 +4850,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4848,6 +4861,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_AUX_C,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4858,6 +4872,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = XELPD_PW_CTL_IDX_AUX_D,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
@@ -4878,6 +4893,7 @@ static const struct i915_power_well_desc xelpd_power_wells[] = {
 		{
 			.hsw.regs = &icl_aux_power_well_regs,
 			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
+			.hsw.fixed_enable_delay = 600,
 		},
 	},
 	{
drivers/gpu/drm/i915/display/intel_display_power.h +0 -0
index 4f0917df4375..22367b5cba96 100644
@@ -223,6 +223,12 @@ struct i915_power_well_desc {
 			u8 idx;
 			/* Mask of pipes whose IRQ logic is backed by the pw */

drivers/gpu/drm/i915/display/intel_display_power.h struct i915_power_well_desc { · line 234

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_power.h +6 -0
 			u8 irq_pipe_mask;
+			/*
+			 * Instead of waiting for the status bit to ack enables,
+			 * just wait a specific amount of time and then consider
+			 * the well enabled.
+			 */
+			u16 fixed_enable_delay;
 			/* The pw is backing the VGA functionality */
 			bool has_vga:1;
 			bool has_fuses:1;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#58 lore raw

PATCH v2 36/50 drm/i915/dg2: Setup display outputs

In reply to Matt Roper

DG2 has outputs on DDI A-D attached to what the bspec diagram shows as "Combo PHY A-D." Note that despite being labelled "combo" the PHYs on these outputs are Synopsys PHYs rather than traditional Intel combo PHY technology.

Cc Anusha Srivatsa <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +6 -1
index 45dc58dedf57..2872b9b77d15 100644
@@ -11329,7 +11329,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 	if (!HAS_DISPLAY(dev_priv))
 		return;
 
-	if (IS_ALDERLAKE_P(dev_priv)) {
+	if (IS_DG2(dev_priv)) {
+		intel_ddi_init(dev_priv, PORT_A);
+		intel_ddi_init(dev_priv, PORT_B);
+		intel_ddi_init(dev_priv, PORT_C);
+		intel_ddi_init(dev_priv, PORT_D_XELPD);
+	} else if (IS_ALDERLAKE_P(dev_priv)) {
 		intel_ddi_init(dev_priv, PORT_A);
 		intel_ddi_init(dev_priv, PORT_B);
 		intel_ddi_init(dev_priv, PORT_TC1);
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 36/50
#59 lore raw

Re: [Intel-gfx] [PATCH v2 36/50] drm/i915/dg2: Setup display outputs

Quoted 4 lines · Matt Roper

DG2 has outputs on DDI A-D attached to what the bspec diagram shows as "Combo PHY A-D." Note that despite being labelled "combo" the PHYs on these outputs are Synopsys PHYs rather than traditional Intel combo PHY technology.

Quoted 15 lines
Cc Anusha Srivatsa <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +0 -0
index 45dc58dedf57..2872b9b77d15 100644
@@ -11329,7 +11329,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 	if (!HAS_DISPLAY(dev_priv))
 		return;
 

drivers/gpu/drm/i915/display/intel_display.c static void intel_setup_outputs(struct drm_i915_private *dev_priv) · line 11340

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +6 -1
-	if (IS_ALDERLAKE_P(dev_priv)) {
+	if (IS_DG2(dev_priv)) {
+		intel_ddi_init(dev_priv, PORT_A);
+		intel_ddi_init(dev_priv, PORT_B);
+		intel_ddi_init(dev_priv, PORT_C);
+		intel_ddi_init(dev_priv, PORT_D_XELPD);
+	} else if (IS_ALDERLAKE_P(dev_priv)) {
 		intel_ddi_init(dev_priv, PORT_A);
 		intel_ddi_init(dev_priv, PORT_B);
 		intel_ddi_init(dev_priv, PORT_TC1);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#60 lore raw

PATCH v2 37/50 drm/i915/dg2: Add dbuf programming

In reply to Matt Roper

DG2 extends our DDB to four DBuf slices; pipes A+B only have access to the first two slices, whereas pipes C+D only have access to the second two.

Confusingly, our bspec decided to switch from 1-based numbering of dbuf slices (S1, S2) to 0-based numbering (S0, S1, S2, S3) in Display13. At the moment we're using the 0-based number scheme for the DBUF_CTL_S() register addressing, but the 1-based number scheme in the actual slice assignment tables. We may want to consider switching the assignment over to 0-based numbering too at some point...

Bspec: 49255
Bspec: 50057

Cc Stanislav Lisovskiy <[email protected]>
---
 .../drm/i915/display/intel_display_power.h    |   4 +
 drivers/gpu/drm/i915/intel_pm.c               | 120 +++++++++++++++++-
 2 files changed, 123 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_power.h +4 -0
index 22367b5cba96..ad788bbd727d 100644
@@ -392,6 +392,10 @@ intel_display_power_put_all_in_set(struct drm_i915_private *i915,
 	intel_display_power_put_mask_in_set(i915, power_domain_set, power_domain_set->mask);
 }
 
+/*
+ * FIXME: We should probably switch this to a 0-based scheme to be consistent
+ * with how we now name/number DBUF_CTL instances.
+ */
 enum dbuf_slice {
 	DBUF_S1,
 	DBUF_S2,
drivers/gpu/drm/i915/intel_pm.c +119 -1

137 lines not on this page · raw message

Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 37/50
#61 lore raw

Re: [Intel-gfx] [PATCH v2 37/50] drm/i915/dg2: Add dbuf programming

Quoted 11 lines · Matt Roper

DG2 extends our DDB to four DBuf slices; pipes A+B only have access to the first two slices, whereas pipes C+D only have access to the second two.

Confusingly, our bspec decided to switch from 1-based numbering of dbuf slices (S1, S2) to 0-based numbering (S0, S1, S2, S3) in Display13. At the moment we're using the 0-based number scheme for the DBUF_CTL_S() register addressing, but the 1-based number scheme in the actual slice assignment tables. We may want to consider switching the assignment over to 0-based numbering too at some point...

Quoted 157 lines

Bspec: 49255
Bspec: 50057

Cc Stanislav Lisovskiy <[email protected]>
---
 .../drm/i915/display/intel_display_power.h    |   4 +
 drivers/gpu/drm/i915/intel_pm.c               | 120 +++++++++++++++++-
 2 files changed, 123 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_power.h +4 -0
index 22367b5cba96..ad788bbd727d 100644
@@ -392,6 +392,10 @@ intel_display_power_put_all_in_set(struct drm_i915_private *i915,
 	intel_display_power_put_mask_in_set(i915, power_domain_set, power_domain_set->mask);
 }
 
+/*
+ * FIXME: We should probably switch this to a 0-based scheme to be consistent
+ * with how we now name/number DBUF_CTL instances.
+ */
 enum dbuf_slice {
 	DBUF_S1,
 	DBUF_S2,
drivers/gpu/drm/i915/intel_pm.c +116 -0
index 0cbb79452fcf..d7c7f061a26e 100644
@@ -4584,6 +4584,117 @@ static const struct dbuf_slice_conf_entry tgl_allowed_dbufs[] =
 	{}
 };
 
+static const struct dbuf_slice_conf_entry dg2_allowed_dbufs[] = {
+	{
+		.active_pipes = BIT(PIPE_A),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1),
+			[PIPE_B] = BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1),
+			[PIPE_B] = BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1),
+			[PIPE_B] = BIT(DBUF_S2),
+			[PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_C] = BIT(DBUF_S3),
+			[PIPE_D] = BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3),
+			[PIPE_D] = BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3),
+			[PIPE_D] = BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1),
+			[PIPE_B] = BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3),
+			[PIPE_D] = BIT(DBUF_S4),
+		},
+	},
+	{}
+};
+
 static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = {
 	{
 		.active_pipes = BIT(PIPE_A),
@@ -4759,12 +4870,19 @@ static u32 adlp_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
 	return compute_dbuf_slices(pipe, active_pipes, adlp_allowed_dbufs);
 }
 
+static u32 dg2_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
+{
+	return compute_dbuf_slices(pipe, active_pipes, dg2_allowed_dbufs);
+}
+
 static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes)
 {

drivers/gpu/drm/i915/intel_pm.c static u32 adlp_compute_dbuf_slices(enum pipe pipe, u32 active_pipes) · line 4888

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +3 -1
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum pipe pipe = crtc->pipe;
 
-	if (IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		return dg2_compute_dbuf_slices(pipe, active_pipes);
+	else if (IS_ALDERLAKE_P(dev_priv))
 		return adlp_compute_dbuf_slices(pipe, active_pipes);
 	else if (DISPLAY_VER(dev_priv) == 12)
 		return tgl_compute_dbuf_slices(pipe, active_pipes);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#62 lore raw

PATCH v2 38/50 drm/i915/dg2: Don't program BW_BUDDY registers

In reply to Matt Roper

Although the BW_BUDDY registers still exist, they are not used for anything on DG2. This change is expected to hold true for future dgpu's too.

Bspec: 49218

---
 drivers/gpu/drm/i915/display/intel_display_power.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +4 -0
index 04af987f3324..9593c517a321 100644
@@ -5814,6 +5814,10 @@ static void tgl_bw_buddy_init(struct drm_i915_private *dev_priv)
 	unsigned long abox_mask = INTEL_INFO(dev_priv)->abox_mask;
 	int config, i;
 
+	/* BW_BUDDY registers are not used on dgpu's beyond DG1 */
+	if (IS_DGFX(dev_priv) && !IS_DG1(dev_priv))
+		return;
+
 	if (IS_ALDERLAKE_S(dev_priv) ||
 	    IS_DG1_REVID(dev_priv, DG1_REVID_A0, DG1_REVID_A0) ||
 	    IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0))
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 38/50
#63 lore raw

Re: [Intel-gfx] [PATCH v2 38/50] drm/i915/dg2: Don't program BW_BUDDY registers

Quoted 3 lines · Matt Roper

Although the BW_BUDDY registers still exist, they are not used for anything on DG2. This change is expected to hold true for future dgpu's too.

Quoted 12 lines

Bspec: 49218

---
 drivers/gpu/drm/i915/display/intel_display_power.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +0 -0
index 04af987f3324..9593c517a321 100644

drivers/gpu/drm/i915/display/intel_display_power.c static void tgl_bw_buddy_init(struct drm_i915_private *dev_priv) · line 5823

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display_power.c +4 -0
@@ -5814,6 +5814,10 @@ static void tgl_bw_buddy_init(struct drm_i915_private *dev_priv)
 	unsigned long abox_mask = INTEL_INFO(dev_priv)->abox_mask;
 	int config, i;
 
+	/* BW_BUDDY registers are not used on dgpu's beyond DG1 */
+	if (IS_DGFX(dev_priv) && !IS_DG1(dev_priv))
+		return;
+
 	if (IS_ALDERLAKE_S(dev_priv) ||
 	    IS_DG1_REVID(dev_priv, DG1_REVID_A0, DG1_REVID_A0) ||
 	    IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0))

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#64 lore raw

PATCH v2 39/50 drm/i915/dg2: Don't read DRAM info

In reply to Matt Roper

DG2 does not use system DRAM information for BW_BUDDY programming or watermark workarounds, so there's no need to read this out at startup.

Cc Anusha Srivatsa <[email protected]>
---
 drivers/gpu/drm/i915/intel_dram.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_dram.c +3 -3
index 879b0f007be3..9675bb94b70b 100644
@@ -494,15 +494,15 @@ void intel_dram_detect(struct drm_i915_private *i915)
 	struct dram_info *dram_info = &i915->dram_info;
 	int ret;
 
+	if (GRAPHICS_VER(i915) < 9 || IS_DG2(i915) || !HAS_DISPLAY(i915))
+		return;
+
 	/*
 	 * Assume level 0 watermark latency adjustment is needed until proven
 	 * otherwise, this w/a is not needed by bxt/glk.
 	 */
 	dram_info->wm_lv_0_adjust_needed = !IS_GEN9_LP(i915);
 
-	if (GRAPHICS_VER(i915) < 9 || !HAS_DISPLAY(i915))
-		return;
-
 	if (GRAPHICS_VER(i915) >= 12)
 		ret = gen12_get_dram_info(i915);
 	else if (GRAPHICS_VER(i915) >= 11)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 39/50
#65 lore raw

Re: [Intel-gfx] [PATCH v2 39/50] drm/i915/dg2: Don't read DRAM info

Quoted 10 lines

-----Original Message-----
From: Roper, Matthew D <[email protected]>
Sent: Tuesday, July 13, 2021 8:15 PM
To: [email protected]
Cc: Roper, Matthew D <[email protected]>; Srivatsa, Anusha <[email protected]>
Subject: [PATCH v2 39/50] drm/i915/dg2: Don't read DRAM info

Quoted 5 lines

DG2 does not use system DRAM information for BW_BUDDY programming or watermark workarounds, so there's no need to read this out at startup.

Cc Anusha Srivatsa <[email protected]>
Quoted 31 lines
---
 drivers/gpu/drm/i915/intel_dram.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_dram.c +3 -0
index 879b0f007be3..9675bb94b70b 100644
@@ -494,15 +494,15 @@ void intel_dram_detect(struct drm_i915_private
 *i915)
 	struct dram_info *dram_info = &i915->dram_info;
 	int ret;
 
+	if (GRAPHICS_VER(i915) < 9 || IS_DG2(i915) || !HAS_DISPLAY(i915))
+		return;
+
 	/*
 	 * Assume level 0 watermark latency adjustment is needed until

proven

drivers/gpu/drm/i915/intel_dram.c +0 -4
 	 * otherwise, this w/a is not needed by bxt/glk.
 	 */
 	dram_info->wm_lv_0_adjust_needed = !IS_GEN9_LP(i915);
 
-	if (GRAPHICS_VER(i915) < 9 || !HAS_DISPLAY(i915))
-		return;
-
 	if (GRAPHICS_VER(i915) >= 12)
 		ret = gen12_get_dram_info(i915);
 	else if (GRAPHICS_VER(i915) >= 11)
--
Quoted 1 line

2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#66 lore raw

PATCH v2 40/50 drm/i915/dg2: DG2 has fixed memory bandwidth

In reply to Matt Roper

DG2 doesn't have a SAGV or QGV points that determine memory bandwidth. Instead it has a constant amount of memory bandwidth available to display that does not need to be reduced based on the number of active planes.

For simplicity, we'll just modify driver initialization to create a single dummy QGV point with the proper amount of memory bandwidth, rather than trying to query the pcode for this information.

Bspec: 64631

---
 drivers/gpu/drm/i915/display/intel_bw.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_bw.c +23 -1
index 0d5d52548925..f554c1974072 100644
@@ -273,6 +273,26 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 	return 0;
 }
 
+static void dg2_get_bw_info(struct drm_i915_private *i915)
+{
+	struct intel_bw_info *bi = &i915->max_bw[0];
+
+	/*
+	 * DG2 doesn't have SAGV or QGV points, just a constant max bandwidth
+	 * that doesn't depend on the number of planes enabled.  Create a
+	 * single dummy QGV point to reflect that.  DG2-G10 platforms have a
+	 * constant 50 GB/s bandwidth, whereas DG2-G11 platforms have 38 GB/s.
+	 */
+	bi->num_planes = 1;
+	bi->num_qgv_points = 1;
+	if (IS_DG2_G11(i915))
+		bi->deratedbw[0] = 38000;
+	else
+		bi->deratedbw[0] = 50000;
+
+	i915->sagv_status = I915_SAGV_NOT_CONTROLLED;
+}
+
 static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
 			       int num_planes, int qgv_point)
 {
@@ -306,7 +326,9 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
 	if (!HAS_DISPLAY(dev_priv))
 		return;
 
-	if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		dg2_get_bw_info(dev_priv);
+	else if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv))
 		icl_get_bw_info(dev_priv, &adls_sa_info);
 	else if (IS_ROCKETLAKE(dev_priv))
 		icl_get_bw_info(dev_priv, &rkl_sa_info);
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 40/50
#67 lore raw

Re: [Intel-gfx] [PATCH v2 40/50] drm/i915/dg2: DG2 has fixed memory bandwidth

Quoted 14 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Matt Roper
Sent: Tuesday, July 13, 2021 8:16 PM
To: [email protected]
Subject: [Intel-gfx] [PATCH v2 40/50] drm/i915/dg2: DG2 has fixed memory bandwidth

DG2 doesn't have a SAGV or QGV points that determine memory bandwidth. Instead it has a constant amount of memory bandwidth available to display that does not need to be reduced based on the number of active planes.

Quoted 6 lines

For simplicity, we'll just modify driver initialization to create a single dummy QGV point with the proper amount of memory bandwidth, rather than trying to query the pcode for this information.

Bspec: 64631

Quoted 52 lines
---
 drivers/gpu/drm/i915/display/intel_bw.c | 24
+++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_bw.c +5 -0
index 0d5d52548925..f554c1974072 100644
@@ -273,6 +273,26 @@ static int icl_get_bw_info(struct drm_i915_private
 *dev_priv, const struct intel
 	return 0;
 }
 
+static void dg2_get_bw_info(struct drm_i915_private *i915) {
+	struct intel_bw_info *bi = &i915->max_bw[0];
+
+	/*
+	 * DG2 doesn't have SAGV or QGV points, just a constant max

bandwidth

drivers/gpu/drm/i915/display/intel_bw.c +2 -0
+	 * that doesn't depend on the number of planes enabled.  Create a
+	 * single dummy QGV point to reflect that.  DG2-G10 platforms have

a

drivers/gpu/drm/i915/display/intel_bw.c +1 -0
+	 * constant 50 GB/s bandwidth, whereas DG2-G11 platforms have 38

GB/s.

drivers/gpu/drm/i915/display/intel_bw.c +14 -2
+	 */
+	bi->num_planes = 1;
+	bi->num_qgv_points = 1;
+	if (IS_DG2_G11(i915))
+		bi->deratedbw[0] = 38000;
+	else
+		bi->deratedbw[0] = 50000;
+
+	i915->sagv_status = I915_SAGV_NOT_CONTROLLED; }
+
 static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
 			       int num_planes, int qgv_point)  { @@ -306,7
+326,9 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
 	if (!HAS_DISPLAY(dev_priv))
 		return;
 
-	if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		dg2_get_bw_info(dev_priv);
+	else if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv))
 		icl_get_bw_info(dev_priv, &adls_sa_info);
 	else if (IS_ROCKETLAKE(dev_priv))
 		icl_get_bw_info(dev_priv, &rkl_sa_info);
--

2.25.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#68 lore raw

PATCH v2 41/50 drm/i915/dg2: Add MPLLB programming for SNPS PHY

In reply to Matt Roper

DG2's SNPS PHYs incorporate a dedicated port PLL called MPLLB which takes the place of the shared DPLLs we've used on past platforms. Let's add the MPLLB programming sequences; they'll be plugged into the rest of the code in future patches.

Bspec: 54032
Bspec: 53881

---
 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/display/intel_display.c  |   1 +
 .../drm/i915/display/intel_display_types.h    |  17 +-
 drivers/gpu/drm/i915/display/intel_dpll.c     |  12 +-
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 517 ++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h |  18 +
 drivers/gpu/drm/i915/i915_reg.h               |  56 ++
 7 files changed, 616 insertions(+), 6 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_snps_phy.h
drivers/gpu/drm/i915/Makefile +1 -0
index 10b3bb6207ba..d87dbf87cfda 100644
@@ -267,6 +267,7 @@ i915-y += \
 	display/intel_pps.o \
 	display/intel_qp_tables.o \
 	display/intel_sdvo.o \
+	display/intel_snps_phy.o \
 	display/intel_tv.o \
 	display/intel_vdsc.o \
 	display/intel_vrr.o \
drivers/gpu/drm/i915/display/intel_display.c +1 -0
index 2872b9b77d15..2357b79d6577 100644
@@ -59,6 +59,7 @@
 #include "display/intel_hdmi.h"
 #include "display/intel_lvds.h"
 #include "display/intel_sdvo.h"
+#include "display/intel_snps_phy.h"
 #include "display/intel_tv.h"
 #include "display/intel_vdsc.h"
 #include "display/intel_vrr.h"
drivers/gpu/drm/i915/display/intel_display_types.h +16 -1
index d94f361b548b..29ae1d9b5abc 100644
@@ -884,6 +884,18 @@ enum intel_output_format {
 	INTEL_OUTPUT_FORMAT_YCBCR444,
 };
 
+struct intel_mpllb_state {
+	u32 clock; /* in KHz */
+	u32 ref_control;
+	u32 mpllb_cp;
+	u32 mpllb_div;
+	u32 mpllb_div2;
+	u32 mpllb_fracn1;
+	u32 mpllb_fracn2;
+	u32 mpllb_sscen;
+	u32 mpllb_sscstep;
+};
+
 struct intel_crtc_state {
 	/*
 	 * uapi (drm) state. This is the software state shown to userspace.
@@ -1018,7 +1030,10 @@ struct intel_crtc_state {
 	struct intel_shared_dpll *shared_dpll;
 
 	/* Actual register state of the dpll, for shared dpll cross-checking. */
-	struct intel_dpll_hw_state dpll_hw_state;
+	union {
+		struct intel_dpll_hw_state dpll_hw_state;
+		struct intel_mpllb_state mpllb_state;
+	};
 
 	/*
 	 * ICL reserved DPLLs for the CRTC/port. The active PLL is selected by
drivers/gpu/drm/i915/display/intel_dpll.c +7 -5
index 89635da9f6f6..14515e62c05e 100644
@@ -11,6 +11,7 @@
 #include "intel_lvds.h"
 #include "intel_panel.h"
 #include "intel_sideband.h"
+#include "display/intel_snps_phy.h"
 
 struct intel_limit {
 	struct {
@@ -923,12 +924,13 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	struct intel_atomic_state *state =
 		to_intel_atomic_state(crtc_state->uapi.state);
+	struct intel_encoder *encoder =
+		intel_get_crtc_new_encoder(state, crtc_state);
 
-	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
-	    DISPLAY_VER(dev_priv) >= 11) {
-		struct intel_encoder *encoder =
-			intel_get_crtc_new_encoder(state, crtc_state);
-
+	if (IS_DG2(dev_priv)) {
+		return intel_mpllb_calc_state(crtc_state, encoder);
+	} else if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
+		   DISPLAY_VER(dev_priv) >= 11) {
 		if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
 			drm_dbg_kms(&dev_priv->drm,
 				    "failed to find PLL for pipe %c\n",
drivers/gpu/drm/i915/display/intel_snps_phy.c new file +517 -0

517 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_snps_phy.h new file +18 -0
new file mode 100644
index 000000000000..205ab46f0b67
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2019 Intel Corporation
+ */
+
+#ifndef __INTEL_SNPS_PHY_H__
+#define __INTEL_SNPS_PHY_H__
+
+struct intel_encoder;
+struct intel_crtc_state;
+
+int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
+			   struct intel_encoder *encoder);
+void intel_mpllb_enable(struct intel_encoder *encoder,
+			const struct intel_crtc_state *crtc_state);
+void intel_mpllb_disable(struct intel_encoder *encoder);
+
+#endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +56 -0

68 lines not on this page · raw message

Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#69 lore raw

PATCH v2 42/50 drm/i915/dg2: Add MPLLB programming for HDMI

In reply to Matt Roper

At the moment we don't have a proper algorithm that can be used to calculate PHY settings for arbitrary HDMI link rates. The PHY tables here should support the regular modes of real-world HDMI monitors.

Bspec: 54032

---
 drivers/gpu/drm/i915/display/intel_ddi.c      |  14 +-
 drivers/gpu/drm/i915/display/intel_display.c  |  47 +++
 drivers/gpu/drm/i915/display/intel_hdmi.c     |  11 +
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 286 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_snps_phy.h |   7 +
 drivers/gpu/drm/i915/i915_reg.h               |   3 +
 6 files changed, 355 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +13 -1
index 26a3aa73fcc4..929a95ddb316 100644
@@ -51,6 +51,7 @@
 #include "intel_panel.h"
 #include "intel_pps.h"
 #include "intel_psr.h"
+#include "intel_snps_phy.h"
 #include "intel_sprite.h"
 #include "intel_tc.h"
 #include "intel_vdsc.h"
@@ -3745,6 +3746,15 @@ void intel_ddi_get_clock(struct intel_encoder *encoder,
 						     &crtc_state->dpll_hw_state);
 }
 
+static void dg2_ddi_get_config(struct intel_encoder *encoder,
+				struct intel_crtc_state *crtc_state)
+{
+	intel_mpllb_readout_hw_state(encoder, &crtc_state->mpllb_state);
+	crtc_state->port_clock = intel_mpllb_calc_port_clock(encoder, &crtc_state->mpllb_state);
+
+	intel_ddi_get_config(encoder, crtc_state);
+}
+
 static void adls_ddi_get_config(struct intel_encoder *encoder,
 				struct intel_crtc_state *crtc_state)
 {
@@ -4606,7 +4616,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	encoder->cloneable = 0;
 	encoder->pipe_mask = ~0;
 
-	if (IS_ALDERLAKE_S(dev_priv)) {
+	if (IS_DG2(dev_priv)) {
+		encoder->get_config = dg2_ddi_get_config;
+	} else if (IS_ALDERLAKE_S(dev_priv)) {
 		encoder->enable_clock = adls_ddi_enable_clock;
 		encoder->disable_clock = adls_ddi_disable_clock;
 		encoder->is_clock_enabled = adls_ddi_is_clock_enabled;
drivers/gpu/drm/i915/display/intel_display.c +47 -0

59 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_hdmi.c +11 -0
index 852af2b23540..b04685bb6439 100644
@@ -51,6 +51,7 @@
 #include "intel_hdmi.h"
 #include "intel_lspcon.h"
 #include "intel_panel.h"
+#include "intel_snps_phy.h"
 
 static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
 {
@@ -1850,6 +1851,16 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
 	if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
 		return MODE_CLOCK_RANGE;
 
+	/*
+	 * SNPS PHYs' MPLLB table-based programming can only handle a fixed
+	 * set of link rates.
+	 *
+	 * FIXME: We will hopefully get an algorithmic way of programming
+	 * the MPLLB for HDMI in the future.
+	 */
+	if (IS_DG2(dev_priv))
+		return intel_snps_phy_check_hdmi_link_rate(clock);
+
 	return MODE_OK;
 }
 
drivers/gpu/drm/i915/display/intel_snps_phy.c +274 -12

312 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_snps_phy.h +7 -0
index 205ab46f0b67..ca4c2a25182b 100644
@@ -8,11 +8,18 @@
 
 struct intel_encoder;
 struct intel_crtc_state;
+struct intel_mpllb_state;
 
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
 void intel_mpllb_enable(struct intel_encoder *encoder,
 			const struct intel_crtc_state *crtc_state);
 void intel_mpllb_disable(struct intel_encoder *encoder);
+void intel_mpllb_readout_hw_state(struct intel_encoder *encoder,
+				  struct intel_mpllb_state *pll_state);
+int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
+				const struct intel_mpllb_state *pll_state);
+
+int intel_snps_phy_check_hdmi_link_rate(int clock);
 
 #endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 1422fbce36cb..92408b4e2730 100644
@@ -2325,12 +2325,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 
 #define SNPS_PHY_MPLLB_SSCEN(phy)		_MMIO_SNPS(phy, 0x168014)
 #define   SNPS_PHY_MPLLB_SSC_EN			REG_BIT(31)
+#define   SNPS_PHY_MPLLB_SSC_UP_SPREAD		REG_BIT(30)
 #define   SNPS_PHY_MPLLB_SSC_PEAK		REG_GENMASK(29, 10)
 
 #define SNPS_PHY_MPLLB_SSCSTEP(phy)		_MMIO_SNPS(phy, 0x168018)
 #define   SNPS_PHY_MPLLB_SSC_STEPSIZE		REG_GENMASK(31, 11)
 
 #define SNPS_PHY_MPLLB_DIV2(phy)		_MMIO_SNPS(phy, 0x16801C)
+#define   SNPS_PHY_MPLLB_HDMI_PIXEL_CLK_DIV	REG_GENMASK(19, 18)
+#define   SNPS_PHY_MPLLB_HDMI_DIV		REG_GENMASK(17, 15)
 #define   SNPS_PHY_MPLLB_REF_CLK_DIV		REG_GENMASK(14, 12)
 #define   SNPS_PHY_MPLLB_MULTIPLIER		REG_GENMASK(11, 0)
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 42/50
#70 lore raw

Re: [Intel-gfx] [PATCH v2 42/50] drm/i915/dg2: Add MPLLB programming for HDMI

Quoted 8 lines · Matt Roper

At the moment we don't have a proper algorithm that can be used to calculate PHY settings for arbitrary HDMI link rates. The PHY tables here should support the regular modes of real-world HDMI monitors.

Bspec: 54032

Quoted 508 lines
---
 drivers/gpu/drm/i915/display/intel_ddi.c      |  14 +-
 drivers/gpu/drm/i915/display/intel_display.c  |  47 +++
 drivers/gpu/drm/i915/display/intel_hdmi.c     |  11 +
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 286 +++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_snps_phy.h |   7 +
 drivers/gpu/drm/i915/i915_reg.h               |   3 +
 6 files changed, 355 insertions(+), 13 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +13 -1
index 26a3aa73fcc4..929a95ddb316 100644
@@ -51,6 +51,7 @@
 #include "intel_panel.h"
 #include "intel_pps.h"
 #include "intel_psr.h"
+#include "intel_snps_phy.h"
 #include "intel_sprite.h"
 #include "intel_tc.h"
 #include "intel_vdsc.h"
@@ -3745,6 +3746,15 @@ void intel_ddi_get_clock(struct intel_encoder *encoder,
 						     &crtc_state->dpll_hw_state);
 }
 
+static void dg2_ddi_get_config(struct intel_encoder *encoder,
+				struct intel_crtc_state *crtc_state)
+{
+	intel_mpllb_readout_hw_state(encoder, &crtc_state->mpllb_state);
+	crtc_state->port_clock = intel_mpllb_calc_port_clock(encoder, &crtc_state->mpllb_state);
+
+	intel_ddi_get_config(encoder, crtc_state);
+}
+
 static void adls_ddi_get_config(struct intel_encoder *encoder,
 				struct intel_crtc_state *crtc_state)
 {
@@ -4606,7 +4616,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	encoder->cloneable = 0;
 	encoder->pipe_mask = ~0;
 
-	if (IS_ALDERLAKE_S(dev_priv)) {
+	if (IS_DG2(dev_priv)) {
+		encoder->get_config = dg2_ddi_get_config;
+	} else if (IS_ALDERLAKE_S(dev_priv)) {
 		encoder->enable_clock = adls_ddi_enable_clock;
 		encoder->disable_clock = adls_ddi_disable_clock;
 		encoder->is_clock_enabled = adls_ddi_is_clock_enabled;
drivers/gpu/drm/i915/display/intel_display.c +47 -0
index 2357b79d6577..6f532b695b29 100644
@@ -9113,6 +9113,52 @@ verify_shared_dpll_state(struct intel_crtc *crtc,
 	}
 }
 
+static void
+verify_mpllb_state(struct intel_atomic_state *state,
+		   struct intel_crtc_state *new_crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(state->base.dev);
+	struct intel_mpllb_state mpllb_hw_state = { 0 };
+	struct intel_mpllb_state *mpllb_sw_state = &new_crtc_state->mpllb_state;
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+	struct intel_encoder *encoder;
+
+	if (!IS_DG2(i915))
+		return;
+
+	if (!new_crtc_state->hw.active)
+		return;
+
+	encoder = intel_get_crtc_new_encoder(state, new_crtc_state);
+	intel_mpllb_readout_hw_state(encoder, &mpllb_hw_state);
+
+#define MPLLB_CHECK(name) do { \
+	if (mpllb_sw_state->name != mpllb_hw_state.name) { \
+		pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \
+				     "(expected 0x%08x, found 0x%08x)", \
+				     mpllb_sw_state->name, \
+				     mpllb_hw_state.name); \
+	} \
+} while (0)
+
+	MPLLB_CHECK(mpllb_cp);
+	MPLLB_CHECK(mpllb_div);
+	MPLLB_CHECK(mpllb_div2);
+	MPLLB_CHECK(mpllb_fracn1);
+	MPLLB_CHECK(mpllb_fracn2);
+	MPLLB_CHECK(mpllb_sscen);
+	MPLLB_CHECK(mpllb_sscstep);
+
+	/*
+	 * ref_control is handled by the hardware/firemware and never
+	 * programmed by the software, but the proper values are supplied
+	 * in the bspec for verification purposes.
+	 */
+	MPLLB_CHECK(ref_control);
+
+#undef MPLLB_CHECK
+}
+
 static void
 intel_modeset_verify_crtc(struct intel_crtc *crtc,
 			  struct intel_atomic_state *state,
@@ -9126,6 +9172,7 @@ intel_modeset_verify_crtc(struct intel_crtc *crtc,
 	verify_connector_state(state, crtc);
 	verify_crtc_state(crtc, old_crtc_state, new_crtc_state);
 	verify_shared_dpll_state(crtc, old_crtc_state, new_crtc_state);
+	verify_mpllb_state(state, new_crtc_state);
 }
 
 static void
drivers/gpu/drm/i915/display/intel_hdmi.c +11 -0
index 852af2b23540..b04685bb6439 100644
@@ -51,6 +51,7 @@
 #include "intel_hdmi.h"
 #include "intel_lspcon.h"
 #include "intel_panel.h"
+#include "intel_snps_phy.h"
 
 static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
 {
@@ -1850,6 +1851,16 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
 	if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
 		return MODE_CLOCK_RANGE;
 
+	/*
+	 * SNPS PHYs' MPLLB table-based programming can only handle a fixed
+	 * set of link rates.
+	 *
+	 * FIXME: We will hopefully get an algorithmic way of programming
+	 * the MPLLB for HDMI in the future.
+	 */
+	if (IS_DG2(dev_priv))
+		return intel_snps_phy_check_hdmi_link_rate(clock);
+
 	return MODE_OK;
 }
 
drivers/gpu/drm/i915/display/intel_snps_phy.c +274 -12
index 6d9205906595..1317b4e94b50 100644
@@ -3,6 +3,8 @@
  * Copyright © 2019 Intel Corporation
  */
 
+#include <linux/util_macros.h>
+
 #include "intel_de.h"
 #include "intel_display_types.h"
 #include "intel_snps_phy.h"
@@ -375,14 +377,172 @@ static const struct intel_mpllb_state *dg2_edp_tables[] = {
 	NULL,
 };
 
-int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
-			   struct intel_encoder *encoder)
-{
-	const struct intel_mpllb_state **tables;
-	int i;
+/*
+ * HDMI link rates with 100 MHz reference clock.
+ */
+
+static const struct intel_mpllb_state dg2_hdmi_25_175 = {
+	.clock = 25175,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 5) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 5) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 128) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 143),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 36663) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 71),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
+static const struct intel_mpllb_state dg2_hdmi_27_0 = {
+	.clock = 27000,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 5) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 5) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 140) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
+static const struct intel_mpllb_state dg2_hdmi_74_25 = {
+	.clock = 74250,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 3) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
+static const struct intel_mpllb_state dg2_hdmi_148_5 = {
+	.clock = 148500,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
+
+static const struct intel_mpllb_state dg2_hdmi_594 = {
+	.clock = 594000,
+	.ref_control =
+		REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
+	.mpllb_cp =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
+	.mpllb_div =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
+	.mpllb_div2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
+	.mpllb_fracn1 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
+	.mpllb_fracn2 =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
+	.mpllb_sscen =
+		REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
+};
 
+static const struct intel_mpllb_state *dg2_hdmi_tables[] = {
+	&dg2_hdmi_25_175,
+	&dg2_hdmi_27_0,
+	&dg2_hdmi_74_25,
+	&dg2_hdmi_148_5,
+	&dg2_hdmi_594,
+	NULL,
+};
+
+static const struct intel_mpllb_state **
+intel_mpllb_tables_get(struct intel_crtc_state *crtc_state,
+		       struct intel_encoder *encoder)
+{
 	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) {
-		tables = dg2_edp_tables;
+		return dg2_edp_tables;
 	} else if (intel_crtc_has_dp_encoder(crtc_state)) {
 		/*
 		 * FIXME: Initially we're just enabling the "combo" outputs on
@@ -397,15 +557,41 @@ int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 		 * that to determine which table to use.
 		 */
 		if (0)
-			tables = dg2_dp_38_4_tables;
+			return dg2_dp_38_4_tables;
 		else
-			tables = dg2_dp_100_tables;
-	} else {
-		/* TODO: Add HDMI support */
-		MISSING_CASE(encoder->type);
-		return -EINVAL;
+			return dg2_dp_100_tables;
+	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
+		return dg2_hdmi_tables;
 	}
 
+	MISSING_CASE(encoder->type);
+	return NULL;
+}
+
+int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
+			   struct intel_encoder *encoder)
+{
+	const struct intel_mpllb_state **tables;
+	int i;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
+		if (intel_snps_phy_check_hdmi_link_rate(crtc_state->port_clock)
+		    != MODE_OK) {
+			/*
+			 * FIXME: Can only support fixed HDMI frequencies
+			 * until we have a proper algorithm under a valid
+			 * license.
+			 */
+			DRM_DEBUG_KMS("Can't support HDMI link rate %d\n",
+				      crtc_state->port_clock);
+			return -EINVAL;
+		}
+	}
+
+	tables = intel_mpllb_tables_get(crtc_state, encoder);
+	if (!tables)
+		return -EINVAL;
+
 	for (i = 0; tables[i]; i++) {
 		if (crtc_state->port_clock <= tables[i]->clock) {
 			crtc_state->mpllb_state = *tables[i];
@@ -515,3 +701,79 @@ void intel_mpllb_disable(struct intel_encoder *encoder)
 	 * We handle this step in bxt_set_cdclk().
 	 */
 }
+
+int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
+				const struct intel_mpllb_state *pll_state)
+{
+	unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1;
+	unsigned int multiplier, tx_clk_div, refclk;
+	bool frac_en;
+
+	if (0)
+		refclk = 38400;
+	else
+		refclk = 100000;
+
+	refclk >>= REG_FIELD_GET(SNPS_PHY_MPLLB_REF_CLK_DIV, pll_state->mpllb_div2) - 1;
+
+	frac_en = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_EN, pll_state->mpllb_fracn1);
+
+	if (frac_en) {
+		frac_quot = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_QUOT, pll_state->mpllb_fracn2);
+		frac_rem = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_REM, pll_state->mpllb_fracn2);
+		frac_den = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_DEN, pll_state->mpllb_fracn1);
+	}
+
+	multiplier = REG_FIELD_GET(SNPS_PHY_MPLLB_MULTIPLIER, pll_state->mpllb_div2) / 2 + 16;
+
+	tx_clk_div = REG_FIELD_GET(SNPS_PHY_MPLLB_TX_CLK_DIV, pll_state->mpllb_div);
+
+	return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, (multiplier << 16) + frac_quot) +
+				     DIV_ROUND_CLOSEST(refclk * frac_rem, frac_den),
+				     10 << (tx_clk_div + 16));
+}
+
+void intel_mpllb_readout_hw_state(struct intel_encoder *encoder,
+				  struct intel_mpllb_state *pll_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+
+	pll_state->mpllb_cp = intel_de_read(dev_priv, SNPS_PHY_MPLLB_CP(phy));
+	pll_state->mpllb_div = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV(phy));
+	pll_state->mpllb_div2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV2(phy));
+	pll_state->mpllb_sscen = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCEN(phy));
+	pll_state->mpllb_sscstep = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCSTEP(phy));
+	pll_state->mpllb_fracn1 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN1(phy));
+	pll_state->mpllb_fracn2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN2(phy));
+
+	/*
+	 * REF_CONTROL is under firmware control and never programmed by the
+	 * driver; we read it only for sanity checking purposes.  The bspec
+	 * only tells us the expected value for one field in this register,
+	 * so we'll only read out those specific bits here.
+	 */
+	pll_state->ref_control = intel_de_read(dev_priv, SNPS_PHY_REF_CONTROL(phy)) &
+		SNPS_PHY_REF_CONTROL_REF_RANGE;
+
+	/*
+	 * MPLLB_DIV is programmed twice, once with the software-computed
+	 * state, then again with the MPLLB_FORCE_EN bit added.  Drop that
+	 * extra bit during readout so that we return the actual expected
+	 * software state.
+	 */
+	pll_state->mpllb_div &= ~SNPS_PHY_MPLLB_FORCE_EN;
+}
+
+int intel_snps_phy_check_hdmi_link_rate(int clock)
+{
+	const struct intel_mpllb_state **tables = dg2_hdmi_tables;
+	int i;
+
+	for (i = 0; tables[i]; i++) {
+		if (clock == tables[i]->clock)
+			return MODE_OK;
+	}
+
+	return MODE_CLOCK_RANGE;
+}
drivers/gpu/drm/i915/display/intel_snps_phy.h +7 -0
index 205ab46f0b67..ca4c2a25182b 100644
@@ -8,11 +8,18 @@
 
 struct intel_encoder;
 struct intel_crtc_state;
+struct intel_mpllb_state;
 
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
 void intel_mpllb_enable(struct intel_encoder *encoder,
 			const struct intel_crtc_state *crtc_state);
 void intel_mpllb_disable(struct intel_encoder *encoder);
+void intel_mpllb_readout_hw_state(struct intel_encoder *encoder,
+				  struct intel_mpllb_state *pll_state);
+int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
+				const struct intel_mpllb_state *pll_state);
+
+int intel_snps_phy_check_hdmi_link_rate(int clock);
 
 #endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 1422fbce36cb..92408b4e2730 100644
@@ -2325,12 +2325,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 
 #define SNPS_PHY_MPLLB_SSCEN(phy)		_MMIO_SNPS(phy, 0x168014)
 #define   SNPS_PHY_MPLLB_SSC_EN			REG_BIT(31)
+#define   SNPS_PHY_MPLLB_SSC_UP_SPREAD		REG_BIT(30)
 #define   SNPS_PHY_MPLLB_SSC_PEAK		REG_GENMASK(29, 10)
 
 #define SNPS_PHY_MPLLB_SSCSTEP(phy)		_MMIO_SNPS(phy, 0x168018)
 #define   SNPS_PHY_MPLLB_SSC_STEPSIZE		REG_GENMASK(31, 11)
 
 #define SNPS_PHY_MPLLB_DIV2(phy)		_MMIO_SNPS(phy, 0x16801C)
+#define   SNPS_PHY_MPLLB_HDMI_PIXEL_CLK_DIV	REG_GENMASK(19, 18)
+#define   SNPS_PHY_MPLLB_HDMI_DIV		REG_GENMASK(17, 15)
 #define   SNPS_PHY_MPLLB_REF_CLK_DIV		REG_GENMASK(14, 12)
 #define   SNPS_PHY_MPLLB_MULTIPLIER		REG_GENMASK(11, 0)
 
Signature · 1 line
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#71 lore raw

PATCH v2 43/50 drm/i915/dg2: Add vswing programming for SNPS phys

In reply to Matt Roper

Vswing programming for SNPS PHYs is just a single step -- look up the value that corresponds to the voltage level from a table and program it into the SNPS_PHY_TX_EQ register.

Bspec: 53920

---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 23 ++++++--
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 54 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h |  4 ++
 drivers/gpu/drm/i915/i915_reg.h               |  5 ++
 4 files changed, 83 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +20 -3
index 929a95ddb316..ade03cf41caa 100644
@@ -1496,6 +1496,16 @@ static int intel_ddi_dp_level(struct intel_dp *intel_dp)
 	return translate_signal_level(intel_dp, signal_levels);
 }
 
+static void
+dg2_set_signal_levels(struct intel_dp *intel_dp,
+		      const struct intel_crtc_state *crtc_state)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	int level = intel_ddi_dp_level(intel_dp);
+
+	intel_snps_phy_ddi_vswing_sequence(encoder, level);
+}
+
 static void
 tgl_set_signal_levels(struct intel_dp *intel_dp,
 		      const struct intel_crtc_state *crtc_state)
@@ -2563,7 +2573,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 */
 
 	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state, level);
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_ddi_vswing_sequence(encoder, level);
+	else
+		tgl_ddi_vswing_sequence(encoder, crtc_state, level);
 
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3102,7 +3115,9 @@ static void intel_enable_ddi_hdmi(struct intel_atomic_state *state,
 			    "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
 			    connector->base.id, connector->name);
 
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_ddi_vswing_sequence(encoder, U32_MAX);
+	else if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_ddi_vswing_sequence(encoder, crtc_state, level);
 	else if (DISPLAY_VER(dev_priv) == 11)
 		icl_ddi_vswing_sequence(encoder, crtc_state, level);
@@ -4075,7 +4090,9 @@ intel_ddi_init_dp_connector(struct intel_digital_port *dig_port)
 	dig_port->dp.set_link_train = intel_ddi_set_link_train;
 	dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train;
 
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (IS_DG2(dev_priv))
+		dig_port->dp.set_signal_levels = dg2_set_signal_levels;
+	else if (DISPLAY_VER(dev_priv) >= 12)
 		dig_port->dp.set_signal_levels = tgl_set_signal_levels;
 	else if (DISPLAY_VER(dev_priv) >= 11)
 		dig_port->dp.set_signal_levels = icl_set_signal_levels;
drivers/gpu/drm/i915/display/intel_snps_phy.c +54 -0

60 lines not on this page · raw message

drivers/gpu/drm/i915/display/intel_snps_phy.h +4 -0
index ca4c2a25182b..3ce92d424f66 100644
@@ -6,6 +6,8 @@
 #ifndef __INTEL_SNPS_PHY_H__
 #define __INTEL_SNPS_PHY_H__
 
+#include <linux/types.h>
+
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
@@ -21,5 +23,7 @@ int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
 				const struct intel_mpllb_state *pll_state);
 
 int intel_snps_phy_check_hdmi_link_rate(int clock);
+void intel_snps_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
+					u32 level);
 
 #endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +5 -0
index 92408b4e2730..c44031dcdcb4 100644
@@ -2340,6 +2340,11 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define SNPS_PHY_REF_CONTROL(phy)		_MMIO_SNPS(phy, 0x168188)
 #define   SNPS_PHY_REF_CONTROL_REF_RANGE	REG_GENMASK(31, 27)
 
+#define SNPS_PHY_TX_EQ(ln, phy)			_MMIO_SNPS_LN(ln, phy, 0x168300)
+#define   SNPS_PHY_TX_EQ_MAIN			REG_GENMASK(23, 18)
+#define   SNPS_PHY_TX_EQ_POST			REG_GENMASK(15, 10)
+#define   SNPS_PHY_TX_EQ_PRE			REG_GENMASK(7, 2)
+
 /* The spec defines this only for BXT PHY0, but lets assume that this
  * would exist for PHY1 too if it had a second channel.
  */
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 43/50
#72 lore raw

Re: [Intel-gfx] [PATCH v2 43/50] drm/i915/dg2: Add vswing programming for SNPS phys

Quoted 8 lines · Matt Roper

Vswing programming for SNPS PHYs is just a single step -- look up the value that corresponds to the voltage level from a table and program it into the SNPS_PHY_TX_EQ register.

Bspec: 53920

Quoted 167 lines
---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 23 ++++++--
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 54 +++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h |  4 ++
 drivers/gpu/drm/i915/i915_reg.h               |  5 ++
 4 files changed, 83 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +20 -3
index 929a95ddb316..ade03cf41caa 100644
@@ -1496,6 +1496,16 @@ static int intel_ddi_dp_level(struct intel_dp *intel_dp)
 	return translate_signal_level(intel_dp, signal_levels);
 }
 
+static void
+dg2_set_signal_levels(struct intel_dp *intel_dp,
+		      const struct intel_crtc_state *crtc_state)
+{
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	int level = intel_ddi_dp_level(intel_dp);
+
+	intel_snps_phy_ddi_vswing_sequence(encoder, level);
+}
+
 static void
 tgl_set_signal_levels(struct intel_dp *intel_dp,
 		      const struct intel_crtc_state *crtc_state)
@@ -2563,7 +2573,10 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 */
 
 	/* 7.e Configure voltage swing and related IO settings */
-	tgl_ddi_vswing_sequence(encoder, crtc_state, level);
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_ddi_vswing_sequence(encoder, level);
+	else
+		tgl_ddi_vswing_sequence(encoder, crtc_state, level);
 
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -3102,7 +3115,9 @@ static void intel_enable_ddi_hdmi(struct intel_atomic_state *state,
 			    "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
 			    connector->base.id, connector->name);
 
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_ddi_vswing_sequence(encoder, U32_MAX);
+	else if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_ddi_vswing_sequence(encoder, crtc_state, level);
 	else if (DISPLAY_VER(dev_priv) == 11)
 		icl_ddi_vswing_sequence(encoder, crtc_state, level);
@@ -4075,7 +4090,9 @@ intel_ddi_init_dp_connector(struct intel_digital_port *dig_port)
 	dig_port->dp.set_link_train = intel_ddi_set_link_train;
 	dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train;
 
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (IS_DG2(dev_priv))
+		dig_port->dp.set_signal_levels = dg2_set_signal_levels;
+	else if (DISPLAY_VER(dev_priv) >= 12)
 		dig_port->dp.set_signal_levels = tgl_set_signal_levels;
 	else if (DISPLAY_VER(dev_priv) >= 11)
 		dig_port->dp.set_signal_levels = icl_set_signal_levels;
drivers/gpu/drm/i915/display/intel_snps_phy.c +54 -0
index 1317b4e94b50..77759bda98a4 100644
@@ -21,6 +21,60 @@
  * since it is not handled by the shared DPLL framework as on other platforms.
  */
 
+static const u32 dg2_ddi_translations[] = {
+	/* VS 0, pre-emph 0 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26),
+
+	/* VS 0, pre-emph 1 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 33) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 6),
+
+	/* VS 0, pre-emph 2 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 38) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 12),
+
+	/* VS 0, pre-emph 3 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 43) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 19),
+
+	/* VS 1, pre-emph 0 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 39),
+
+	/* VS 1, pre-emph 1 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 44) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 8),
+
+	/* VS 1, pre-emph 2 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 47) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 15),
+
+	/* VS 2, pre-emph 0 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 52),
+
+	/* VS 2, pre-emph 1 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 51) |
+		REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, 10),
+
+	/* VS 3, pre-emph 0 */
+	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 62),
+};
+
+void intel_snps_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
+					u32 level)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	int n_entries, ln;
+
+	n_entries = ARRAY_SIZE(dg2_ddi_translations);
+	if (level >= n_entries)
+		level = n_entries - 1;
+
+	for (ln = 0; ln < 4; ln++)
+		intel_de_write(dev_priv, SNPS_PHY_TX_EQ(ln, phy),
+			       dg2_ddi_translations[level]);
+}
+
 /*
  * Basic DP link rates with 100 MHz reference clock.
  */
drivers/gpu/drm/i915/display/intel_snps_phy.h +4 -0
index ca4c2a25182b..3ce92d424f66 100644
@@ -6,6 +6,8 @@
 #ifndef __INTEL_SNPS_PHY_H__
 #define __INTEL_SNPS_PHY_H__
 
+#include <linux/types.h>
+
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
@@ -21,5 +23,7 @@ int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
 				const struct intel_mpllb_state *pll_state);
 
 int intel_snps_phy_check_hdmi_link_rate(int clock);
+void intel_snps_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
+					u32 level);
 
 #endif /* __INTEL_SNPS_PHY_H__ */
drivers/gpu/drm/i915/i915_reg.h +5 -0
index 92408b4e2730..c44031dcdcb4 100644
@@ -2340,6 +2340,11 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define SNPS_PHY_REF_CONTROL(phy)		_MMIO_SNPS(phy, 0x168188)
 #define   SNPS_PHY_REF_CONTROL_REF_RANGE	REG_GENMASK(31, 27)
 
+#define SNPS_PHY_TX_EQ(ln, phy)			_MMIO_SNPS_LN(ln, phy, 0x168300)
+#define   SNPS_PHY_TX_EQ_MAIN			REG_GENMASK(23, 18)
+#define   SNPS_PHY_TX_EQ_POST			REG_GENMASK(15, 10)
+#define   SNPS_PHY_TX_EQ_PRE			REG_GENMASK(7, 2)
+
 /* The spec defines this only for BXT PHY0, but lets assume that this
  * would exist for PHY1 too if it had a second channel.
  */
Signature · 1 line
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#73 lore raw

PATCH v2 44/50 drm/i915/dg2: Update modeset sequences

In reply to Matt Roper

DG2 has some changes to the expected modesetting sequences when compared to gen12. Adjust our driver logic accordingly. Although the DP sequence is pretty similar to TGL's, there are some steps that change, so let's split the handling for that out into a separate function.

v2:
- Switch wait_for_us() -> _wait_for() so that we can parameterize the timeout rather than duplicating the macro call. (Jani)

Bspec: 54128

Cc Lucas De Marchi <[email protected]>
Cc Anusha Srivatsa <[email protected]>
Cc Jani Nikula <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 131 +++++++++++++++++++++--
 1 file changed, 123 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +123 -8
index ade03cf41caa..f96dd8dde61e 100644
@@ -172,14 +172,18 @@ void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
 static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv,
 				      enum port port)
 {
+	int ret;
+
 	/* Wait > 518 usecs for DDI_BUF_CTL to be non idle */
 	if (DISPLAY_VER(dev_priv) < 10) {
 		usleep_range(518, 1000);
 		return;
 	}
 
-	if (wait_for_us(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) &
-			  DDI_BUF_IS_IDLE), 500))
+	ret = _wait_for(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) &
+			  DDI_BUF_IS_IDLE), IS_DG2(dev_priv) ? 1200 : 500, 10, 10);
+
+	if (ret)
 		drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c to get active\n",
 			port_name(port));
 }
@@ -2207,7 +2211,7 @@ void intel_ddi_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
 		ddi_clk_needed = false;
 	}
 
-	if (ddi_clk_needed || !encoder->disable_clock ||
+	if (ddi_clk_needed || !encoder->is_clock_enabled ||
 	    !encoder->is_clock_enabled(encoder))
 		return;
 
@@ -2488,6 +2492,116 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state)
 		     OVERLAP_PIXELS_MASK, dss1);
 }
 
+static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,
+				  struct intel_encoder *encoder,
+				  const struct intel_crtc_state *crtc_state,
+				  const struct drm_connector_state *conn_state)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
+	int level = intel_ddi_dp_level(intel_dp);
+
+	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
+				 crtc_state->lane_count);
+
+	/*
+	 * 1. Enable Power Wells
+	 *
+	 * This was handled at the beginning of intel_atomic_commit_tail(),
+	 * before we called down into this function.
+	 */
+
+	/* 2. Enable Panel Power if PPS is required */
+	intel_pps_on(intel_dp);
+
+	/*
+	 * 3. Enable the port PLL.
+	 */
+	intel_ddi_enable_clock(encoder, crtc_state);
+
+	/* 4. Enable IO power */
+	if (!intel_phy_is_tc(dev_priv, phy) ||
+	    dig_port->tc_mode != TC_PORT_TBT_ALT)
+		dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv,
+								   dig_port->ddi_io_power_domain);
+
+	/*
+	 * 5. The rest of the below are substeps under the bspec's "Enable and
+	 * Train Display Port" step.  Note that steps that are specific to
+	 * MST will be handled by intel_mst_pre_enable_dp() before/after it
+	 * calls into this function.  Also intel_mst_pre_enable_dp() only calls
+	 * us when active_mst_links==0, so any steps designated for "single
+	 * stream or multi-stream master transcoder" can just be performed
+	 * unconditionally here.
+	 */
+
+	/*
+	 * 5.a Configure Transcoder Clock Select to direct the Port clock to the
+	 * Transcoder.
+	 */
+	intel_ddi_enable_pipe_clock(encoder, crtc_state);
+
+	/* 5.b Not relevant to i915 for now */
+
+	/*
+	 * 5.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
+	 * Transport Select
+	 */
+	intel_ddi_config_transcoder_func(encoder, crtc_state);
+
+	/*
+	 * 5.d Configure & enable DP_TP_CTL with link training pattern 1
+	 * selected
+	 *
+	 * This will be handled by the intel_dp_start_link_train() farther
+	 * down this function.
+	 */
+
+	/* 5.e Configure voltage swing and related IO settings */
+	intel_snps_phy_ddi_vswing_sequence(encoder, level);
+
+	/*
+	 * 5.f Configure and enable DDI_BUF_CTL
+	 * 5.g Wait for DDI_BUF_CTL DDI Idle Status = 0b (Not Idle), timeout
+	 *     after 1200 us.
+	 *
+	 * We only configure what the register value will be here.  Actual
+	 * enabling happens during link training farther down.
+	 */
+	intel_ddi_init_dp_buf_reg(encoder, crtc_state);
+
+	if (!is_mst)
+		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
+
+	intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
+	/*
+	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
+	 * in the FEC_CONFIGURATION register to 1 before initiating link
+	 * training
+	 */
+	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
+
+	/*
+	 * 5.h Follow DisplayPort specification training sequence (see notes for
+	 *     failure handling)
+	 * 5.i If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle
+	 *     Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent)
+	 *     (timeout after 800 us)
+	 */
+	intel_dp_start_link_train(intel_dp, crtc_state);
+
+	/* 5.j Set DP_TP_CTL link training to Normal */
+	if (!is_trans_port_sync_mode(crtc_state))
+		intel_dp_stop_link_train(intel_dp, crtc_state);
+
+	/* 5.k Configure and enable FEC if needed */
+	intel_ddi_enable_fec(encoder, crtc_state);
+	intel_dsc_enable(encoder, crtc_state);
+}
+
 static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 				  struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state,
@@ -2573,10 +2687,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 */
 
 	/* 7.e Configure voltage swing and related IO settings */
-	if (IS_DG2(dev_priv))
-		intel_snps_phy_ddi_vswing_sequence(encoder, level);
-	else
-		tgl_ddi_vswing_sequence(encoder, crtc_state, level);
+	tgl_ddi_vswing_sequence(encoder, crtc_state, level);
 
 	/*
 	 * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
@@ -2708,7 +2819,9 @@ static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (IS_DG2(dev_priv))
+		dg2_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
+	else if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
 	else
 		hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
@@ -4634,6 +4747,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	encoder->pipe_mask = ~0;
 
 	if (IS_DG2(dev_priv)) {
+		encoder->enable_clock = intel_mpllb_enable;
+		encoder->disable_clock = intel_mpllb_disable;
 		encoder->get_config = dg2_ddi_get_config;
 	} else if (IS_ALDERLAKE_S(dev_priv)) {
 		encoder->enable_clock = adls_ddi_enable_clock;
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#74 lore raw

PATCH v2 45/50 drm/i915/dg2: Classify DG2 PHY types

In reply to Matt Roper

Although the bspec labels four of DG2's outputs as "combo PHY," the underlying PHYs in both cases are actually Synopsys PHYs that are programmed completely differently than the traditional Intel "combo" PHY units. As such, we don't want intel_phy_is_combo to take us down legacy programming paths, so just return false from it on DG2. Instead add a new intel_phy_is_snps() that will return true for all DG2 PHYs.

Cc Anusha Srivatsa <[email protected]>
Cc Matt Atwood <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_display.c | 26 +++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h |  1 +
 2 files changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +25 -1
index 6f532b695b29..90d4efba466b 100644
@@ -3698,6 +3698,13 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
 {
 	if (phy == PHY_NONE)
 		return false;
+	else if (IS_DG2(dev_priv))
+		/*
+		 * DG2 outputs labelled as "combo PHY" in the bspec use
+		 * SNPS PHYs with completely different programming,
+		 * hence we always return false here.
+		 */
+		return false;
 	else if (IS_ALDERLAKE_S(dev_priv))
 		return phy <= PHY_E;
 	else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
@@ -3712,7 +3719,10 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
 
 bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
 {
-	if (IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		/* DG2's "TC1" output uses a SNPS PHY */
+		return false;
+	else if (IS_ALDERLAKE_P(dev_priv))
 		return phy >= PHY_F && phy <= PHY_I;
 	else if (IS_TIGERLAKE(dev_priv))
 		return phy >= PHY_D && phy <= PHY_I;
@@ -3722,6 +3732,20 @@ bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
 		return false;
 }
 
+bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy)
+{
+	if (phy == PHY_NONE)
+		return false;
+	else if (IS_DG2(dev_priv))
+		/*
+		 * All four "combo" ports and the TC1 port (PHY E) use
+		 * Synopsis PHYs.
+		 */
+		return phy <= PHY_E;
+
+	return false;
+}
+
 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
 {
 	if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD)
drivers/gpu/drm/i915/display/intel_display.h +1 -0
index c9dbaf074d77..284936f0ddab 100644
@@ -561,6 +561,7 @@ struct drm_display_mode *
 intel_encoder_current_mode(struct intel_encoder *encoder);
 bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy);
 bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy);
+bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy);
 enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv,
 			      enum port port);
 int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 45/50
#75 lore raw

Re: [Intel-gfx] [PATCH v2 45/50] drm/i915/dg2: Classify DG2 PHY types

Quoted 10 lines · Matt Roper

Although the bspec labels four of DG2's outputs as "combo PHY," the underlying PHYs in both cases are actually Synopsys PHYs that are programmed completely differently than the traditional Intel "combo" PHY units. As such, we don't want intel_phy_is_combo to take us down legacy programming paths, so just return false from it on DG2. Instead add a new intel_phy_is_snps() that will return true for all DG2 PHYs.

Cc Anusha Srivatsa <[email protected]>
Cc Matt Atwood <[email protected]>
Quoted 71 lines
---
 drivers/gpu/drm/i915/display/intel_display.c | 26 +++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.h |  1 +
 2 files changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +25 -1
index 6f532b695b29..90d4efba466b 100644
@@ -3698,6 +3698,13 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
 {
 	if (phy == PHY_NONE)
 		return false;
+	else if (IS_DG2(dev_priv))
+		/*
+		 * DG2 outputs labelled as "combo PHY" in the bspec use
+		 * SNPS PHYs with completely different programming,
+		 * hence we always return false here.
+		 */
+		return false;
 	else if (IS_ALDERLAKE_S(dev_priv))
 		return phy <= PHY_E;
 	else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
@@ -3712,7 +3719,10 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
 
 bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
 {
-	if (IS_ALDERLAKE_P(dev_priv))
+	if (IS_DG2(dev_priv))
+		/* DG2's "TC1" output uses a SNPS PHY */
+		return false;
+	else if (IS_ALDERLAKE_P(dev_priv))
 		return phy >= PHY_F && phy <= PHY_I;
 	else if (IS_TIGERLAKE(dev_priv))
 		return phy >= PHY_D && phy <= PHY_I;
@@ -3722,6 +3732,20 @@ bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
 		return false;
 }
 
+bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy)
+{
+	if (phy == PHY_NONE)
+		return false;
+	else if (IS_DG2(dev_priv))
+		/*
+		 * All four "combo" ports and the TC1 port (PHY E) use
+		 * Synopsis PHYs.
+		 */
+		return phy <= PHY_E;
+
+	return false;
+}
+
 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
 {
 	if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD)
drivers/gpu/drm/i915/display/intel_display.h +1 -0
index c9dbaf074d77..284936f0ddab 100644
@@ -561,6 +561,7 @@ struct drm_display_mode *
 intel_encoder_current_mode(struct intel_encoder *encoder);
 bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy);
 bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy);
+bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy);
 enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv,
 			      enum port port);
 int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
Signature · 1 line
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#76 lore raw

PATCH v2 46/50 drm/i915/dg2: Wait for SNPS PHY calibration during display init

In reply to Matt Roper

Initialization of the PHY is handled by the hardware/firmware, but the driver should wait up to 25ms for the PHY to report that its calibration has completed.

Bspec: 49189
Bspec: 50107

---
 .../gpu/drm/i915/display/intel_display_power.c    |  5 +++++
 drivers/gpu/drm/i915/display/intel_snps_phy.c     | 15 +++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h     |  3 +++
 drivers/gpu/drm/i915/i915_reg.h                   |  1 +
 4 files changed, 24 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +5 -0
index 9593c517a321..2fb178a27327 100644
@@ -18,6 +18,7 @@
 #include "intel_pm.h"
 #include "intel_pps.h"
 #include "intel_sideband.h"
+#include "intel_snps_phy.h"
 #include "intel_tc.h"
 #include "intel_vga.h"
 
@@ -5900,6 +5901,10 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
 	if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_bw_buddy_init(dev_priv);
 
+	/* 8. Ensure PHYs have completed calibration and adaptation */
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_wait_for_calibration(dev_priv);
+
 	if (resume && intel_dmc_has_payload(dev_priv))
 		intel_dmc_load_program(dev_priv);
 
drivers/gpu/drm/i915/display/intel_snps_phy.c +15 -0
index 77759bda98a4..f0c30d3d2dfb 100644
@@ -21,6 +21,21 @@
  * since it is not handled by the shared DPLL framework as on other platforms.
  */
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv)
+{
+	enum phy phy;
+
+	for_each_phy_masked(phy, ~0) {
+		if (!intel_phy_is_snps(dev_priv, phy))
+			continue;
+
+		if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy),
+					    DG2_PHY_DP_TX_ACK_MASK, 25))
+			DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n",
+				  phy);
+	}
+}
+
 static const u32 dg2_ddi_translations[] = {
 	/* VS 0, pre-emph 0 */
 	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26),
drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
index 3ce92d424f66..6aa33ff729ec 100644
@@ -8,10 +8,13 @@
 
 #include <linux/types.h>
 
+struct drm_i915_private;
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv);
+
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
 void intel_mpllb_enable(struct intel_encoder *encoder,
drivers/gpu/drm/i915/i915_reg.h +1 -0
index c44031dcdcb4..9c7dc812317e 100644
@@ -12454,6 +12454,7 @@ enum skl_power_gate {
 						 _ICL_PHY_MISC_B)
 #define  ICL_PHY_MISC_MUX_DDID			(1 << 28)
 #define  ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN	(1 << 23)
+#define  DG2_PHY_DP_TX_ACK_MASK			REG_GENMASK(23, 20)
 
 /* Icelake Display Stream Compression Registers */
 #define DSCA_PICTURE_PARAMETER_SET_0		_MMIO(0x6B200)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 46/50
#77 lore raw

Re: [Intel-gfx] [PATCH v2 46/50] drm/i915/dg2: Wait for SNPS PHY calibration during display init

Quoted 8 lines · Matt Roper

Initialization of the PHY is handled by the hardware/firmware, but the driver should wait up to 25ms for the PHY to report that its calibration has completed.

Bspec: 49189
Bspec: 50107

Quoted 89 lines
---
 .../gpu/drm/i915/display/intel_display_power.c    |  5 +++++
 drivers/gpu/drm/i915/display/intel_snps_phy.c     | 15 +++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h     |  3 +++
 drivers/gpu/drm/i915/i915_reg.h                   |  1 +
 4 files changed, 24 insertions(+)
drivers/gpu/drm/i915/display/intel_display_power.c +5 -0
index 9593c517a321..2fb178a27327 100644
@@ -18,6 +18,7 @@
 #include "intel_pm.h"
 #include "intel_pps.h"
 #include "intel_sideband.h"
+#include "intel_snps_phy.h"
 #include "intel_tc.h"
 #include "intel_vga.h"
 
@@ -5900,6 +5901,10 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
 	if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_bw_buddy_init(dev_priv);
 
+	/* 8. Ensure PHYs have completed calibration and adaptation */
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_wait_for_calibration(dev_priv);
+
 	if (resume && intel_dmc_has_payload(dev_priv))
 		intel_dmc_load_program(dev_priv);
 
drivers/gpu/drm/i915/display/intel_snps_phy.c +15 -0
index 77759bda98a4..f0c30d3d2dfb 100644
@@ -21,6 +21,21 @@
  * since it is not handled by the shared DPLL framework as on other platforms.
  */
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv)
+{
+	enum phy phy;
+
+	for_each_phy_masked(phy, ~0) {
+		if (!intel_phy_is_snps(dev_priv, phy))
+			continue;
+
+		if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy),
+					    DG2_PHY_DP_TX_ACK_MASK, 25))
+			DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n",
+				  phy);
+	}
+}
+
 static const u32 dg2_ddi_translations[] = {
 	/* VS 0, pre-emph 0 */
 	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26),
drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
index 3ce92d424f66..6aa33ff729ec 100644
@@ -8,10 +8,13 @@
 
 #include <linux/types.h>
 
+struct drm_i915_private;
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv);
+
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
 void intel_mpllb_enable(struct intel_encoder *encoder,
drivers/gpu/drm/i915/i915_reg.h +1 -0
index c44031dcdcb4..9c7dc812317e 100644
@@ -12454,6 +12454,7 @@ enum skl_power_gate {
 						 _ICL_PHY_MISC_B)
 #define  ICL_PHY_MISC_MUX_DDID			(1 << 28)
 #define  ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN	(1 << 23)
+#define  DG2_PHY_DP_TX_ACK_MASK			REG_GENMASK(23, 20)
 
 /* Icelake Display Stream Compression Registers */
 #define DSCA_PICTURE_PARAMETER_SET_0		_MMIO(0x6B200)
Signature · 1 line
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#78 lore raw

PATCH v2 47/50 drm/i915/dg2: Update lane disable power state during PSR

In reply to Matt Roper

From: Gwan-gyeong Mun <[email protected]>

The PSR enable/disable sequences now require that we program an extra register in the PHY to adjust the lane disable power setting.

Bspec: 49274
Bspec: 53885

---
 drivers/gpu/drm/i915/display/intel_psr.c      |  7 +++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 14 ++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h |  3 +++
 drivers/gpu/drm/i915/i915_reg.h               |  3 +++
 4 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_psr.c +7 -0
index 4dfe1dceb863..c987a7fbc8fe 100644
@@ -32,6 +32,7 @@
 #include "intel_dp_aux.h"
 #include "intel_hdmi.h"
 #include "intel_psr.h"
+#include "intel_snps_phy.h"
 #include "intel_sprite.h"
 #include "skl_universal_plane.h"
 
@@ -1206,6 +1207,7 @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp,
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
 	struct intel_encoder *encoder = &dig_port->base;
 	u32 val;
 
@@ -1231,6 +1233,7 @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp,
 	intel_dp_compute_psr_vsc_sdp(intel_dp, crtc_state, conn_state,
 				     &intel_dp->psr.vsc);
 	intel_write_dp_vsc_sdp(encoder, crtc_state, &intel_dp->psr.vsc);
+	intel_snps_phy_update_psr_power_state(dev_priv, phy, true);
 	intel_psr_enable_sink(intel_dp);
 	intel_psr_enable_source(intel_dp);
 	intel_dp->psr.enabled = true;
@@ -1327,6 +1330,8 @@ static void intel_psr_wait_exit_locked(struct intel_dp *intel_dp)
 static void intel_psr_disable_locked(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	enum phy phy = intel_port_to_phy(dev_priv,
+					 dp_to_dig_port(intel_dp)->base.port);
 
 	lockdep_assert_held(&intel_dp->psr.lock);
 
@@ -1353,6 +1358,8 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp)
 			     TRANS_SET_CONTEXT_LATENCY(intel_dp->psr.transcoder),
 			     TRANS_SET_CONTEXT_LATENCY_MASK, 0);
 
+	intel_snps_phy_update_psr_power_state(dev_priv, phy, false);
+
 	/* Disable PSR on Sink */
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
 
drivers/gpu/drm/i915/display/intel_snps_phy.c +14 -0
index f0c30d3d2dfb..18b52b64af95 100644
@@ -36,6 +36,20 @@ void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv)
 	}
 }
 
+void intel_snps_phy_update_psr_power_state(struct drm_i915_private *dev_priv,
+					   enum phy phy, bool enable)
+{
+	u32 val;
+
+	if (!intel_phy_is_snps(dev_priv, phy))
+		return;
+
+	val = REG_FIELD_PREP(SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR,
+			     enable ? 2 : 3);
+	intel_uncore_rmw(&dev_priv->uncore, SNPS_PHY_TX_REQ(phy),
+			 SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR, val);
+}
+
 static const u32 dg2_ddi_translations[] = {
 	/* VS 0, pre-emph 0 */
 	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26),
drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
index 6aa33ff729ec..6261ff88ef5c 100644
@@ -12,8 +12,11 @@ struct drm_i915_private;
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
+enum phy;
 
 void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv);
+void intel_snps_phy_update_psr_power_state(struct drm_i915_private *dev_priv,
+					   enum phy phy, bool enable);
 
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 9c7dc812317e..34d3806568e4 100644
@@ -2340,6 +2340,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define SNPS_PHY_REF_CONTROL(phy)		_MMIO_SNPS(phy, 0x168188)
 #define   SNPS_PHY_REF_CONTROL_REF_RANGE	REG_GENMASK(31, 27)
 
+#define SNPS_PHY_TX_REQ(phy)			_MMIO_SNPS(phy, 0x168200)
+#define   SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR	REG_GENMASK(31, 30)
+
 #define SNPS_PHY_TX_EQ(ln, phy)			_MMIO_SNPS_LN(ln, phy, 0x168300)
 #define   SNPS_PHY_TX_EQ_MAIN			REG_GENMASK(23, 18)
 #define   SNPS_PHY_TX_EQ_POST			REG_GENMASK(15, 10)
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 47/50
#79 lore raw

Re: [Intel-gfx] [PATCH v2 47/50] drm/i915/dg2: Update lane disable power state during PSR

Quoted 14 lines

-----Original Message-----
From: Roper, Matthew D <[email protected]>
Sent: Tuesday, July 13, 2021 8:16 PM
To: [email protected]
Cc: Roper, Matthew D <[email protected]>; Mun, Gwan-gyeong <[email protected]>; Srivatsa, Anusha <[email protected]>
Subject: [PATCH v2 47/50] drm/i915/dg2: Update lane disable power state during PSR

From: Gwan-gyeong Mun <[email protected]>

Quoted 8 lines

The PSR enable/disable sequences now require that we program an extra register in the PHY to adjust the lane disable power setting.

Bspec: 49274
Bspec: 53885

Quoted 120 lines
---
 drivers/gpu/drm/i915/display/intel_psr.c      |  7 +++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.c | 14 ++++++++++++++
drivers/gpu/drm/i915/display/intel_snps_phy.h |  3 +++
 drivers/gpu/drm/i915/i915_reg.h               |  3 +++
 4 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_psr.c +3 -0
index 4dfe1dceb863..c987a7fbc8fe 100644
@@ -32,6 +32,7 @@
 #include "intel_dp_aux.h"
 #include "intel_hdmi.h"
 #include "intel_psr.h"
+#include "intel_snps_phy.h"
 #include "intel_sprite.h"
 #include "skl_universal_plane.h"
 
@@ -1206,6 +1207,7 @@ static void intel_psr_enable_locked(struct intel_dp
 *intel_dp,  {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
 	struct intel_encoder *encoder = &dig_port->base;
 	u32 val;
 
@@ -1231,6 +1233,7 @@ static void intel_psr_enable_locked(struct intel_dp
 *intel_dp,
 	intel_dp_compute_psr_vsc_sdp(intel_dp, crtc_state, conn_state,
 				     &intel_dp->psr.vsc);
 	intel_write_dp_vsc_sdp(encoder, crtc_state, &intel_dp->psr.vsc);
+	intel_snps_phy_update_psr_power_state(dev_priv, phy, true);
 	intel_psr_enable_sink(intel_dp);
 	intel_psr_enable_source(intel_dp);
drivers/gpu/drm/i915/display/intel_psr.c +0 -0
 	intel_dp->psr.enabled = true;
@@ -1327,6 +1330,8 @@ static void intel_psr_wait_exit_locked(struct

intel_dp *intel_dp) static void intel_psr_disable_locked(struct intel_dp *intel_dp) {

drivers/gpu/drm/i915/display/intel_psr.c +2 -0
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+	enum phy phy = intel_port_to_phy(dev_priv,
+					 dp_to_dig_port(intel_dp)-
Quoted 1 line

base.port);

drivers/gpu/drm/i915/display/intel_psr.c +2 -0
 	lockdep_assert_held(&intel_dp->psr.lock);
@@ -1353,6 +1358,8 @@ static void intel_psr_disable_locked(struct intel_dp
 *intel_dp)
 			     TRANS_SET_CONTEXT_LATENCY(intel_dp-
 >psr.transcoder),
 			     TRANS_SET_CONTEXT_LATENCY_MASK, 0);
 
+	intel_snps_phy_update_psr_power_state(dev_priv, phy, false);
+
 	/* Disable PSR on Sink */
drivers/gpu/drm/i915/display/intel_psr.c +0 -0
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
drivers/gpu/drm/i915/display/intel_snps_phy.c +12 -0
index f0c30d3d2dfb..18b52b64af95 100644
@@ -36,6 +36,20 @@ void intel_snps_phy_wait_for_calibration(struct
 drm_i915_private *dev_priv)
 	}
 }
 
+void intel_snps_phy_update_psr_power_state(struct drm_i915_private
 *dev_priv,
+					   enum phy phy, bool enable)
+{
+	u32 val;
+
+	if (!intel_phy_is_snps(dev_priv, phy))
+		return;
+
+	val =
 REG_FIELD_PREP(SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR,
+			     enable ? 2 : 3);
+	intel_uncore_rmw(&dev_priv->uncore, SNPS_PHY_TX_REQ(phy),
+			 SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR, val);

}

drivers/gpu/drm/i915/display/intel_snps_phy.c +1 -0
+
 static const u32 dg2_ddi_translations[] = {
 	/* VS 0, pre-emph 0 */
 	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26), diff --git

a/drivers/gpu/drm/i915/display/intel_snps_phy.h
b/drivers/gpu/drm/i915/display/intel_snps_phy.h
index 6aa33ff729ec..6261ff88ef5c 100644

drivers/gpu/drm/i915/display/intel_snps_phy.h +3 -0
@@ -12,8 +12,11 @@ struct drm_i915_private;  struct intel_encoder;  struct
 intel_crtc_state;  struct intel_mpllb_state;
+enum phy;
 
 void intel_snps_phy_wait_for_calibration(struct drm_i915_private
 *dev_priv);
+void intel_snps_phy_update_psr_power_state(struct drm_i915_private
 *dev_priv,
+					   enum phy phy, bool enable);
 
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_reg.h index 9c7dc812317e..34d3806568e4 100644

drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -2340,6 +2340,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t
 reg)
 #define SNPS_PHY_REF_CONTROL(phy)		_MMIO_SNPS(phy,
 0x168188)
 #define   SNPS_PHY_REF_CONTROL_REF_RANGE	REG_GENMASK(31,
 27)
 
+#define SNPS_PHY_TX_REQ(phy)			_MMIO_SNPS(phy,

0x168200)
+#define SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR

	REG_GENMASK(31, 30)
Quoted 9 lines

+
#define SNPS_PHY_TX_EQ(ln, phy) _MMIO_SNPS_LN(ln,
phy, 0x168300)
#define SNPS_PHY_TX_EQ_MAIN REG_GENMASK(23,
18)
#define SNPS_PHY_TX_EQ_POST REG_GENMASK(15,
10)
--
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#80 lore raw

PATCH v2 48/50 drm/i915/dg2: Add DG2 to the PSR2 defeature list

In reply to Matt Roper

From: José Roberto de Souza <[email protected]>

PSR2 is not supported on DG2.

---
 drivers/gpu/drm/i915/display/intel_psr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_psr.c +2 -1
index c987a7fbc8fe..584b58066738 100644
@@ -866,7 +866,8 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	}
 
 	/* Wa_16011181250 */
-	if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv)) {
+	if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
+	    IS_DG2(dev_priv)) {
 		drm_dbg_kms(&dev_priv->drm, "PSR2 is defeatured for this platform\n");
 		return false;
 	}
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 48/50
#81 lore raw

Re: [Intel-gfx] [PATCH v2 48/50] drm/i915/dg2: Add DG2 to the PSR2 defeature list

Quoted 10 lines

-----Original Message-----
From: Intel-gfx <[email protected]> On Behalf Of Matt Roper
Sent: Tuesday, July 13, 2021 8:16 PM
To: [email protected]
Subject: [Intel-gfx] [PATCH v2 48/50] drm/i915/dg2: Add DG2 to the PSR2 defeature list

Quoted 8 lines

From: José Roberto de Souza <[email protected]>

PSR2 is not supported on DG2.

Quoted 24 lines
---
 drivers/gpu/drm/i915/display/intel_psr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_psr.c +2 -1
index c987a7fbc8fe..584b58066738 100644
@@ -866,7 +866,8 @@ static bool intel_psr2_config_valid(struct intel_dp
 *intel_dp,
 	}
 
 	/* Wa_16011181250 */
-	if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv)) {
+	if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
+	    IS_DG2(dev_priv)) {
 		drm_dbg_kms(&dev_priv->drm, "PSR2 is defeatured for this
 platform\n");
drivers/gpu/drm/i915/display/intel_psr.c +0 -1
 		return false;
 	}
--

2.25.4

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#82 lore raw

PATCH v2 49/50 drm/i915/dg2: Update to bigjoiner path

In reply to Matt Roper

From: Animesh Manna <[email protected]>

In verify_mpllb_state() encoder is retrieved from best_encoder of connector_state. As there will be only one connector_state for bigjoiner and checking encoder may not be needed for bigjoiner-slave. This code path related to mpll is done on dg2 and need this fix to avoid null pointer dereference issue.

---
 drivers/gpu/drm/i915/display/intel_display.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +3 -0
index 90d4efba466b..d038fa6a8b24 100644
@@ -9153,6 +9153,9 @@ verify_mpllb_state(struct intel_atomic_state *state,
 	if (!new_crtc_state->hw.active)
 		return;
 
+	if (new_crtc_state->bigjoiner_slave)
+		return;
+
 	encoder = intel_get_crtc_new_encoder(state, new_crtc_state);
 	intel_mpllb_readout_hw_state(encoder, &mpllb_hw_state);
 
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#83 lore raw

PATCH v2 50/50 drm/i915/dg2: Configure PCON in DP pre-enable path

In reply to Matt Roper

From: Ankit Nautiyal <[email protected]>

Add the functions to configure HDMI2.1 pcon for DG2, before DP link training.

---
 drivers/gpu/drm/i915/display/intel_ddi.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_ddi.c +3 -0
index f96dd8dde61e..659583c360d4 100644
@@ -2576,6 +2576,7 @@ static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	if (!is_mst)
 		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
 
+	intel_dp_configure_protocol_converter(intel_dp, crtc_state);
 	intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
 	/*
 	 * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
@@ -2583,6 +2584,8 @@ static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	 * training
 	 */
 	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
+	intel_dp_check_frl_training(intel_dp);
+	intel_dp_pcon_dsc_configure(intel_dp, crtc_state);
 
 	/*
 	 * 5.h Follow DisplayPort specification training sequence (see notes for
Signature · 6 lines
2.25.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#84 lore raw

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev5)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: Begin enabling Xe_HP SDV and DG2 platforms (rev5)
URL : https://patchwork.freedesktop.org/series/92135/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
7a5fbcb1f150 drm/i915: Add XE_HP initial definitions
8bb98dab1d23 drm/i915: Fork DG1 interrupt handler
371d21e168c4 drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based
00fe5bfd2f5b drm/i915/gen12: Use fuse info to enable SFC
25d8fcda069c drm/i915/selftests: Allow for larger engine counts
75088f6dd8c2 drm/i915/xehp: Extra media engines - Part 1 (engine definitions)
6f3c6efb8015 drm/i915/xehp: Extra media engines - Part 2 (interrupts)
99c452861f03 drm/i915/xehp: Extra media engines - Part 3 (reset)
04721d135106 drm/i915/xehp: Xe_HP forcewake support
-:10: WARNING:BAD_SIGN_OFF: Non-standard signature: Co-authored-by:
#10: 
Co-authored-by: Daniele Ceraolo Spurio <[email protected]>

-:25: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #25: FILE: drivers/gpu/drm/i915/gt/intel_execlists_submission.c:3311:
+ engine->fw_domain = intel_uncore_forcewake_for_reg(engine->uncore,
+ RING_EXECLIST_CONTROL(engine->mmio_base),

-:208: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #208: FILE: drivers/gpu/drm/i915/intel_uncore.c:1323:
+ GEN_FW_RANGE(0x0, 0x1fff, 0), /*
+ 0x0 - 0xaff: reserved

-:209: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #209: FILE: drivers/gpu/drm/i915/intel_uncore.c:1324:
+ 0xb00 - 0x1fff: always on */

-:213: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #213: FILE: drivers/gpu/drm/i915/intel_uncore.c:1328:
+ GEN_FW_RANGE(0x4b00, 0x51ff, 0), /*
+ 0x4b00 - 0x4fff: reserved

-:214: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #214: FILE: drivers/gpu/drm/i915/intel_uncore.c:1329:
+ 0x5000 - 0x51ff: always on */

-:219: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #219: FILE: drivers/gpu/drm/i915/intel_uncore.c:1334:
+ GEN_FW_RANGE(0x8160, 0x81ff, 0), /*
+ 0x8160 - 0x817f: reserved

-:220: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #220: FILE: drivers/gpu/drm/i915/intel_uncore.c:1335:
+ 0x8180 - 0x81ff: always on */

-:224: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #224: FILE: drivers/gpu/drm/i915/intel_uncore.c:1339:
+ GEN_FW_RANGE(0x8500, 0x94cf, FORCEWAKE_GT), /*
+ 0x8500 - 0x87ff: gt

-:227: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #227: FILE: drivers/gpu/drm/i915/intel_uncore.c:1342:
+ 0x9480 - 0x94cf: reserved */

-:230: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #230: FILE: drivers/gpu/drm/i915/intel_uncore.c:1345:
+ GEN_FW_RANGE(0x9560, 0x97ff, 0), /*
+ 0x9560 - 0x95ff: always on

-:231: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #231: FILE: drivers/gpu/drm/i915/intel_uncore.c:1346:
+ 0x9600 - 0x97ff: reserved */

-:233: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #233: FILE: drivers/gpu/drm/i915/intel_uncore.c:1348:
+ GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /*
+ 0x9800 - 0xb4ff: gt

-:235: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #235: FILE: drivers/gpu/drm/i915/intel_uncore.c:1350:
+ 0xc000 - 0xcfff: gt */

-:240: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #240: FILE: drivers/gpu/drm/i915/intel_uncore.c:1355:
+ GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /*
+ 0xdd00 - 0xddff: gt

-:241: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #241: FILE: drivers/gpu/drm/i915/intel_uncore.c:1356:
+ 0xde00 - 0xde7f: reserved */

-:243: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #243: FILE: drivers/gpu/drm/i915/intel_uncore.c:1358:
+ GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /*
+ 0xde80 - 0xdfff: render

-:245: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #245: FILE: drivers/gpu/drm/i915/intel_uncore.c:1360:
+ 0xe100 - 0xe8ff: render */

-:247: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #247: FILE: drivers/gpu/drm/i915/intel_uncore.c:1362:
+ GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /*
+ 0xe900 - 0xe9ff: gt

-:249: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #249: FILE: drivers/gpu/drm/i915/intel_uncore.c:1364:
+ 0xf000 - 0xffff: gt */

-:251: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #251: FILE: drivers/gpu/drm/i915/intel_uncore.c:1366:
+ GEN_FW_RANGE(0x10000, 0x13fff, 0), /*
+ 0x10000 - 0x11fff: reserved

-:253: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #253: FILE: drivers/gpu/drm/i915/intel_uncore.c:1368:
+ 0x12800 - 0x13fff: reserved */

-:259: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #259: FILE: drivers/gpu/drm/i915/intel_uncore.c:1374:
+ GEN_FW_RANGE(0x14800, 0x1ffff, FORCEWAKE_RENDER), /*
+ 0x14800 - 0x14fff: render

-:261: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #261: FILE: drivers/gpu/drm/i915/intel_uncore.c:1376:
+ 0x16e00 - 0x1ffff: render */

-:263: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #263: FILE: drivers/gpu/drm/i915/intel_uncore.c:1378:
+ GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /*
+ 0x20000 - 0x20fff: VD0

-:264: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #264: FILE: drivers/gpu/drm/i915/intel_uncore.c:1379:
+ 0x21000 - 0x21fff: reserved */

-:267: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #267: FILE: drivers/gpu/drm/i915/intel_uncore.c:1382:
+ GEN_FW_RANGE(0x24000, 0x2417f, 0), /*
+ 0x24000 - 0x2407f: always on

-:268: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #268: FILE: drivers/gpu/drm/i915/intel_uncore.c:1383:
+ 0x24080 - 0x2417f: reserved */

-:270: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #270: FILE: drivers/gpu/drm/i915/intel_uncore.c:1385:
+ GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /*
+ 0x24180 - 0x241ff: gt

-:271: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #271: FILE: drivers/gpu/drm/i915/intel_uncore.c:1386:
+ 0x24200 - 0x249ff: reserved */

-:273: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #273: FILE: drivers/gpu/drm/i915/intel_uncore.c:1388:
+ GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /*
+ 0x24a00 - 0x24a7f: render

-:274: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #274: FILE: drivers/gpu/drm/i915/intel_uncore.c:1389:
+ 0x24a80 - 0x251ff: reserved */

-:276: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #276: FILE: drivers/gpu/drm/i915/intel_uncore.c:1391:
+ GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /*
+ 0x25200 - 0x252ff: gt

-:277: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #277: FILE: drivers/gpu/drm/i915/intel_uncore.c:1392:
+ 0x25300 - 0x25fff: reserved */

-:279: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #279: FILE: drivers/gpu/drm/i915/intel_uncore.c:1394:
+ GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /*
+ 0x26000 - 0x27fff: render

-:281: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #281: FILE: drivers/gpu/drm/i915/intel_uncore.c:1396:
+ 0x2a000 - 0x2ffff: undocumented */

-:285: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #285: FILE: drivers/gpu/drm/i915/intel_uncore.c:1400:
+ GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /*
+ 0x1c0000 - 0x1c2bff: VD0

-:289: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #289: FILE: drivers/gpu/drm/i915/intel_uncore.c:1404:
+ 0x1c3f00 - 0x1c3fff: VD0 */

-:291: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #291: FILE: drivers/gpu/drm/i915/intel_uncore.c:1406:
+ GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /*
+ 0x1c4000 - 0x1c6bff: VD1

-:294: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #294: FILE: drivers/gpu/drm/i915/intel_uncore.c:1409:
+ 0x1c6e00 - 0x1c7fff: reserved */

-:296: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #296: FILE: drivers/gpu/drm/i915/intel_uncore.c:1411:
+ GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /*
+ 0x1c8000 - 0x1ca0ff: VE0

-:297: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #297: FILE: drivers/gpu/drm/i915/intel_uncore.c:1412:
+ 0x1ca100 - 0x1cbfff: reserved */

-:303: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #303: FILE: drivers/gpu/drm/i915/intel_uncore.c:1418:
+ GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /*
+ 0x1d0000 - 0x1d2bff: VD2

-:307: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #307: FILE: drivers/gpu/drm/i915/intel_uncore.c:1422:
+ 0x1d3f00 - 0x1d3fff: VD2 */

-:309: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #309: FILE: drivers/gpu/drm/i915/intel_uncore.c:1424:
+ GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /*
+ 0x1d4000 - 0x1d6bff: VD3

-:312: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #312: FILE: drivers/gpu/drm/i915/intel_uncore.c:1427:
+ 0x1d6e00 - 0x1d7fff: reserved */

-:314: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #314: FILE: drivers/gpu/drm/i915/intel_uncore.c:1429:
+ GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /*
+ 0x1d8000 - 0x1da0ff: VE1

-:315: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #315: FILE: drivers/gpu/drm/i915/intel_uncore.c:1430:
+ 0x1da100 - 0x1dffff: reserved */

-:317: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #317: FILE: drivers/gpu/drm/i915/intel_uncore.c:1432:
+ GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /*
+ 0x1e0000 - 0x1e2bff: VD4

-:321: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #321: FILE: drivers/gpu/drm/i915/intel_uncore.c:1436:
+ 0x1e3f00 - 0x1e3fff: VD4 */

-:323: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #323: FILE: drivers/gpu/drm/i915/intel_uncore.c:1438:
+ GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /*
+ 0x1e4000 - 0x1e6bff: VD5

-:326: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #326: FILE: drivers/gpu/drm/i915/intel_uncore.c:1441:
+ 0x1e6e00 - 0x1e7fff: reserved */

-:328: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #328: FILE: drivers/gpu/drm/i915/intel_uncore.c:1443:
+ GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /*
+ 0x1e8000 - 0x1ea0ff: VE2

-:329: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #329: FILE: drivers/gpu/drm/i915/intel_uncore.c:1444:
+ 0x1ea100 - 0x1effff: reserved */

-:331: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #331: FILE: drivers/gpu/drm/i915/intel_uncore.c:1446:
+ GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /*
+ 0x1f0000 - 0x1f2bff: VD6

-:335: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #335: FILE: drivers/gpu/drm/i915/intel_uncore.c:1450:
+ 0x1f3f00 - 0x1f3fff: VD6 */

-:337: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #337: FILE: drivers/gpu/drm/i915/intel_uncore.c:1452:
+ GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /*
+ 0x1f4000 - 0x1f6bff: VD7

-:340: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line #340: FILE: drivers/gpu/drm/i915/intel_uncore.c:1455:
+ 0x1f6e00 - 0x1f7fff: reserved */

total: 0 errors, 57 warnings, 1 checks, 467 lines checked 12a2020fa1fc drm/i915/xehp: Define multicast register ranges f5a167391d70 drm/i915/xehp: Handle new device context ID format e6c034ba7a58 drm/i915/xehp: New engine context offsets 733505aa0488 drm/i915/xehp: handle new steering options
-:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #51: FILE: drivers/gpu/drm/i915/gt/intel_gt.c:117:
+ if (GRAPHICS_VER(gt->i915) >= 11 &&
+ GRAPHICS_VER_FULL(gt->i915) < IP_VER(12, 50)) {

-:195: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #195: FILE: drivers/gpu/drm/i915/gt/intel_workarounds.c:955:
+ unsigned slice, unsigned subslice)

-:195: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned' #195: FILE: drivers/gpu/drm/i915/gt/intel_workarounds.c:955:
+ unsigned slice, unsigned subslice)

total: 0 errors, 2 warnings, 1 checks, 282 lines checked
f983b1241a0f drm/i915/xehp: Loop over all gslices for INSTDONE processing -:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'iter_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:583:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \

+	     (iter_) < GEN_MAX_SUBSLICES; \
+	     (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \
+	     (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \

+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))

-:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'gslice_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:583:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \

+	     (iter_) < GEN_MAX_SUBSLICES; \
+	     (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \
+	     (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \

+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))

-:135: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'dss_' - possible side-effects? #135: FILE: drivers/gpu/drm/i915/gt/intel_engine_types.h:583:
+#define for_each_instdone_gslice_dss_xehp(dev_priv_, sseu_, iter_, gslice_, dss_) \
+ for ((iter_) = 0, (gslice_) = 0, (dss_) = 0; \

+	     (iter_) < GEN_MAX_SUBSLICES; \
+	     (iter_)++, (gslice_) = (iter_) / GEN_DSS_PER_GSLICE, \
+	     (dss_) = (iter_) % GEN_DSS_PER_GSLICE) \

+ for_each_if(intel_sseu_has_subslice((sseu_), 0, (iter_)))

total: 0 errors, 0 warnings, 3 checks, 164 lines checked
559ec30fa734 drm/i915/xehpsdv: add initial XeHP SDV definitions b359a5197220 drm/i915/xehp: Changes to ss/eu definitions
381532783086 drm/i915/xehpsdv: Add maximum sseu limits
9beeacbb8d15 drm/i915/xehpsdv: Add compute DSS type
70410e269067 drm/i915/xehpsdv: Define steering tables
5cd632524fbb drm/i915/xehpsdv: Define MOCS table for XeHP SDV 638ddf4e9d14 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP edd8638b9ce9 drm/i915/xehpsdv: Read correct RP_STATE_CAP register 8d231c0c99c3 drm/i915/dg2: add DG2 platform info
-:49: CHECK:MACRO_ARG_REUSE: Macro argument reuse '__i915' - possible side-effects? #49: FILE: drivers/gpu/drm/i915/i915_drv.h:1637:
+#define IS_DG2_GT_STEP(__i915, variant, since, until) \
+ (IS_SUBPLATFORM(__i915, INTEL_DG2, INTEL_SUBPLATFORM_##variant) && \
+ IS_GT_STEP(__i915, since, until))

-:53: CHECK:MACRO_ARG_REUSE: Macro argument reuse '__i915' - possible side-effects? #53: FILE: drivers/gpu/drm/i915/i915_drv.h:1641:
+#define IS_DG2_DISP_STEP(__i915, since, until) \
+ (IS_DG2(__i915) && \
+ IS_DISPLAY_STEP(__i915, since, until))

total: 0 errors, 0 warnings, 2 checks, 117 lines checked 8527f182dc41 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV 462ae54b609e drm/i915/dg2: Add forcewake table
-:178: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #178: FILE: drivers/gpu/drm/i915/intel_uncore.c:1328:
+ GEN_FW_RANGE(0x0, 0x1fff, 0), /* \
+ 0x0 - 0xaff: reserved \

-:179: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #179: FILE: drivers/gpu/drm/i915/intel_uncore.c:1329:
+ 0xb00 - 0x1fff: always on */ \

-:183: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #183: FILE: drivers/gpu/drm/i915/intel_uncore.c:1333:
+ GEN_FW_RANGE(0x4b00, 0x51ff, 0), /* \
+ 0x4b00 - 0x4fff: reserved \

-:184: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #184: FILE: drivers/gpu/drm/i915/intel_uncore.c:1334:
+ 0x5000 - 0x51ff: always on */ \

-:189: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #189: FILE: drivers/gpu/drm/i915/intel_uncore.c:1339:
+ GEN_FW_RANGE(0x8160, 0x81ff, 0), /* \
+ 0x8160 - 0x817f: reserved \

-:190: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #190: FILE: drivers/gpu/drm/i915/intel_uncore.c:1340:
+ 0x8180 - 0x81ff: always on */ \

-:194: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #194: FILE: drivers/gpu/drm/i915/intel_uncore.c:1344:
+ GEN_FW_RANGE(0x8500, 0x8cff, FORCEWAKE_GT), /* \
+ 0x8500 - 0x87ff: gt \

-:196: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #196: FILE: drivers/gpu/drm/i915/intel_uncore.c:1346:
+ 0x8c80 - 0x8cff: gt (DG2 only) */ \

-:198: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #198: FILE: drivers/gpu/drm/i915/intel_uncore.c:1348:
+ GEN_FW_RANGE(0x8d00, 0x8fff, FORCEWAKE_RENDER), /* \
+ 0x8d00 - 0x8dff: render (DG2 only) \

-:199: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #199: FILE: drivers/gpu/drm/i915/intel_uncore.c:1349:
+ 0x8e00 - 0x8fff: reserved */ \

-:201: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #201: FILE: drivers/gpu/drm/i915/intel_uncore.c:1351:
+ GEN_FW_RANGE(0x9000, 0x94cf, FORCEWAKE_GT), /* \
+ 0x9000 - 0x947f: gt \

-:202: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #202: FILE: drivers/gpu/drm/i915/intel_uncore.c:1352:
+ 0x9480 - 0x94cf: reserved */ \

-:205: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #205: FILE: drivers/gpu/drm/i915/intel_uncore.c:1355:
+ GEN_FW_RANGE(0x9560, 0x967f, 0), /* \
+ 0x9560 - 0x95ff: always on \

-:206: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #206: FILE: drivers/gpu/drm/i915/intel_uncore.c:1356:
+ 0x9600 - 0x967f: reserved */ \

-:208: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #208: FILE: drivers/gpu/drm/i915/intel_uncore.c:1358:
+ GEN_FW_RANGE(0x9680, 0x97ff, FORCEWAKE_RENDER), /* \
+ 0x9680 - 0x96ff: render (DG2 only) \

-:209: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #209: FILE: drivers/gpu/drm/i915/intel_uncore.c:1359:
+ 0x9700 - 0x97ff: reserved */ \

-:211: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #211: FILE: drivers/gpu/drm/i915/intel_uncore.c:1361:
+ GEN_FW_RANGE(0x9800, 0xcfff, FORCEWAKE_GT), /* \
+ 0x9800 - 0xb4ff: gt \

-:213: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #213: FILE: drivers/gpu/drm/i915/intel_uncore.c:1363:
+ 0xc000 - 0xcfff: gt */ \

-:219: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #219: FILE: drivers/gpu/drm/i915/intel_uncore.c:1369:
+ GEN_FW_RANGE(0xdd00, 0xde7f, FORCEWAKE_GT), /* \
+ 0xdd00 - 0xddff: gt \

-:220: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #220: FILE: drivers/gpu/drm/i915/intel_uncore.c:1370:
+ 0xde00 - 0xde7f: reserved */ \

-:222: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #222: FILE: drivers/gpu/drm/i915/intel_uncore.c:1372:
+ GEN_FW_RANGE(0xde80, 0xe8ff, FORCEWAKE_RENDER), /* \
+ 0xde80 - 0xdfff: render \

-:224: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #224: FILE: drivers/gpu/drm/i915/intel_uncore.c:1374:
+ 0xe100 - 0xe8ff: render */ \

-:226: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #226: FILE: drivers/gpu/drm/i915/intel_uncore.c:1376:
+ GEN_FW_RANGE(0xe900, 0xffff, FORCEWAKE_GT), /* \
+ 0xe900 - 0xe9ff: gt \

-:228: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #228: FILE: drivers/gpu/drm/i915/intel_uncore.c:1378:
+ 0xf000 - 0xffff: gt */ \

-:230: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #230: FILE: drivers/gpu/drm/i915/intel_uncore.c:1380:
+ GEN_FW_RANGE(0x10000, 0x12fff, 0), /* \
+ 0x10000 - 0x11fff: reserved \

-:232: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #232: FILE: drivers/gpu/drm/i915/intel_uncore.c:1382:
+ 0x12800 - 0x12fff: reserved */ \

-:235: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #235: FILE: drivers/gpu/drm/i915/intel_uncore.c:1385:
+ GEN_FW_RANGE(0x13200, 0x13fff, FORCEWAKE_MEDIA_VDBOX2), /* \
+ 0x13200 - 0x133ff: VD2 (DG2 only) \

-:236: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #236: FILE: drivers/gpu/drm/i915/intel_uncore.c:1386:
+ 0x13400 - 0x13fff: reserved */ \

-:243: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #243: FILE: drivers/gpu/drm/i915/intel_uncore.c:1393:
+ GEN_FW_RANGE(0x15000, 0x16dff, FORCEWAKE_GT), /* \
+ 0x15000 - 0x15fff: gt (DG2 only) \

-:244: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #244: FILE: drivers/gpu/drm/i915/intel_uncore.c:1394:
+ 0x16000 - 0x16dff: reserved */ \

-:247: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #247: FILE: drivers/gpu/drm/i915/intel_uncore.c:1397:
+ GEN_FW_RANGE(0x20000, 0x21fff, FORCEWAKE_MEDIA_VDBOX0), /* \
+ 0x20000 - 0x20fff: VD0 (XEHPSDV only) \

-:248: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #248: FILE: drivers/gpu/drm/i915/intel_uncore.c:1398:
+ 0x21000 - 0x21fff: reserved */ \

-:251: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #251: FILE: drivers/gpu/drm/i915/intel_uncore.c:1401:
+ GEN_FW_RANGE(0x24000, 0x2417f, 0), /* \
+ 0x24000 - 0x2407f: always on \

-:252: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #252: FILE: drivers/gpu/drm/i915/intel_uncore.c:1402:
+ 0x24080 - 0x2417f: reserved */ \

-:254: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #254: FILE: drivers/gpu/drm/i915/intel_uncore.c:1404:
+ GEN_FW_RANGE(0x24180, 0x249ff, FORCEWAKE_GT), /* \
+ 0x24180 - 0x241ff: gt \

-:255: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #255: FILE: drivers/gpu/drm/i915/intel_uncore.c:1405:
+ 0x24200 - 0x249ff: reserved */ \

-:257: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #257: FILE: drivers/gpu/drm/i915/intel_uncore.c:1407:
+ GEN_FW_RANGE(0x24a00, 0x251ff, FORCEWAKE_RENDER), /* \
+ 0x24a00 - 0x24a7f: render \

-:258: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #258: FILE: drivers/gpu/drm/i915/intel_uncore.c:1408:
+ 0x24a80 - 0x251ff: reserved */ \

-:260: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #260: FILE: drivers/gpu/drm/i915/intel_uncore.c:1410:
+ GEN_FW_RANGE(0x25200, 0x25fff, FORCEWAKE_GT), /* \
+ 0x25200 - 0x252ff: gt \

-:261: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #261: FILE: drivers/gpu/drm/i915/intel_uncore.c:1411:
+ 0x25300 - 0x25fff: reserved */ \

-:263: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #263: FILE: drivers/gpu/drm/i915/intel_uncore.c:1413:
+ GEN_FW_RANGE(0x26000, 0x2ffff, FORCEWAKE_RENDER), /* \
+ 0x26000 - 0x27fff: render \

-:265: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #265: FILE: drivers/gpu/drm/i915/intel_uncore.c:1415:
+ 0x2a000 - 0x2ffff: undocumented */ \

-:269: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #269: FILE: drivers/gpu/drm/i915/intel_uncore.c:1419:
+ GEN_FW_RANGE(0x1c0000, 0x1c3fff, FORCEWAKE_MEDIA_VDBOX0), /* \
+ 0x1c0000 - 0x1c2bff: VD0 \

-:273: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #273: FILE: drivers/gpu/drm/i915/intel_uncore.c:1423:
+ 0x1c3f00 - 0x1c3fff: VD0 */ \

-:275: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #275: FILE: drivers/gpu/drm/i915/intel_uncore.c:1425:
+ GEN_FW_RANGE(0x1c4000, 0x1c7fff, FORCEWAKE_MEDIA_VDBOX1), /* \
+ 0x1c4000 - 0x1c6bff: VD1 \

-:278: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #278: FILE: drivers/gpu/drm/i915/intel_uncore.c:1428:
+ 0x1c6e00 - 0x1c7fff: reserved */ \

-:280: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #280: FILE: drivers/gpu/drm/i915/intel_uncore.c:1430:
+ GEN_FW_RANGE(0x1c8000, 0x1cbfff, FORCEWAKE_MEDIA_VEBOX0), /* \
+ 0x1c8000 - 0x1ca0ff: VE0 \

-:281: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #281: FILE: drivers/gpu/drm/i915/intel_uncore.c:1431:
+ 0x1ca100 - 0x1cbfff: reserved */ \

-:287: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #287: FILE: drivers/gpu/drm/i915/intel_uncore.c:1437:
+ GEN_FW_RANGE(0x1d0000, 0x1d3fff, FORCEWAKE_MEDIA_VDBOX2), /* \
+ 0x1d0000 - 0x1d2bff: VD2 \

-:292: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #292: FILE: drivers/gpu/drm/i915/intel_uncore.c:1442:
+ 0x1d3f00 - 0x1d3fff: VD2 */ \

-:294: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #294: FILE: drivers/gpu/drm/i915/intel_uncore.c:1444:
+ GEN_FW_RANGE(0x1d4000, 0x1d7fff, FORCEWAKE_MEDIA_VDBOX3), /* \
+ 0x1d4000 - 0x1d6bff: VD3 \

-:297: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #297: FILE: drivers/gpu/drm/i915/intel_uncore.c:1447:
+ 0x1d6e00 - 0x1d7fff: reserved */ \

-:299: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #299: FILE: drivers/gpu/drm/i915/intel_uncore.c:1449:
+ GEN_FW_RANGE(0x1d8000, 0x1dffff, FORCEWAKE_MEDIA_VEBOX1), /* \
+ 0x1d8000 - 0x1da0ff: VE1 \

-:300: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #300: FILE: drivers/gpu/drm/i915/intel_uncore.c:1450:
+ 0x1da100 - 0x1dffff: reserved */ \

-:302: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #302: FILE: drivers/gpu/drm/i915/intel_uncore.c:1452:
+ GEN_FW_RANGE(0x1e0000, 0x1e3fff, FORCEWAKE_MEDIA_VDBOX4), /* \
+ 0x1e0000 - 0x1e2bff: VD4 \

-:306: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #306: FILE: drivers/gpu/drm/i915/intel_uncore.c:1456:
+ 0x1e3f00 - 0x1e3fff: VD4 */ \

-:308: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #308: FILE: drivers/gpu/drm/i915/intel_uncore.c:1458:
+ GEN_FW_RANGE(0x1e4000, 0x1e7fff, FORCEWAKE_MEDIA_VDBOX5), /* \
+ 0x1e4000 - 0x1e6bff: VD5 \

-:311: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #311: FILE: drivers/gpu/drm/i915/intel_uncore.c:1461:
+ 0x1e6e00 - 0x1e7fff: reserved */ \

-:313: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #313: FILE: drivers/gpu/drm/i915/intel_uncore.c:1463:
+ GEN_FW_RANGE(0x1e8000, 0x1effff, FORCEWAKE_MEDIA_VEBOX2), /* \
+ 0x1e8000 - 0x1ea0ff: VE2 \

-:314: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #314: FILE: drivers/gpu/drm/i915/intel_uncore.c:1464:
+ 0x1ea100 - 0x1effff: reserved */ \

-:316: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #316: FILE: drivers/gpu/drm/i915/intel_uncore.c:1466:
+ GEN_FW_RANGE(0x1f0000, 0x1f3fff, FORCEWAKE_MEDIA_VDBOX6), /* \
+ 0x1f0000 - 0x1f2bff: VD6 \

-:320: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #320: FILE: drivers/gpu/drm/i915/intel_uncore.c:1470:
+ 0x1f3f00 - 0x1f3fff: VD6 */ \

-:322: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines #322: FILE: drivers/gpu/drm/i915/intel_uncore.c:1472:
+ GEN_FW_RANGE(0x1f4000, 0x1f7fff, FORCEWAKE_MEDIA_VDBOX7), /* \
+ 0x1f4000 - 0x1f6bff: VD7 \

-:325: WARNING:LINE_CONTINUATIONS: Avoid unnecessary line continuations #325: FILE: drivers/gpu/drm/i915/intel_uncore.c:1475:
+ 0x1f6e00 - 0x1f7fff: reserved */ \

total: 0 errors, 64 warnings, 0 checks, 318 lines checked
1232841b09bc drm/i915/dg2: Update LNCF steering ranges
ed945621c3f2 drm/i915/dg2: Add SQIDI steering
56c13089d010 drm/i915/dg2: Add new LRI reg offsets
c6bfb5cac52e drm/i915/dg2: Maintain backward-compatible nested batch behavior c4f3a58eb9b9 drm/i915/dg2: Report INSTDONE_GEOM values in error state
1ae2606f06f9 drm/i915/dg2: Define MOCS table for DG2
dd67eb915449 drm/i915/dg2: Add fake PCH
dfa122ad3f15 drm/i915/dg2: Add cdclk table and reference clock
76524872d616 drm/i915/dg2: Skip shared DPLL handling
8119ad7f31ee drm/i915/dg2: Don't wait for AUX power well enable ACKs
f3d519fa8374 drm/i915/dg2: Setup display outputs
3a7526efaf70 drm/i915/dg2: Add dbuf programming
cc08e720e5ae drm/i915/dg2: Don't program BW_BUDDY registers
60aa12c033cf drm/i915/dg2: Don't read DRAM info
118fc85a94ad drm/i915/dg2: DG2 has fixed memory bandwidth
689792bb94d6 drm/i915/dg2: Add MPLLB programming for SNPS PHY
-:110: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating? #110:
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 671 lines checked 89d6432d3673 drm/i915/dg2: Add MPLLB programming for HDMI -:32: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #32: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:3750:
+static void dg2_ddi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state)

-:81: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'name' - possible side-effects? #81: FILE: drivers/gpu/drm/i915/display/intel_display.c:9135:
+#define MPLLB_CHECK(name) do { \
+ if (mpllb_sw_state->name != mpllb_hw_state.name) { \
+ pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \
+ "(expected 0x%08x, found 0x%08x)", \
+ mpllb_s

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#85 lore raw

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev5)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: Begin enabling Xe_HP SDV and DG2 platforms (rev5)
URL : https://patchwork.freedesktop.org/series/92135/
State : warning

== Summary ==

$ dim sparse --fast origin/drm-tip
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
-
+drivers/gpu/drm/i915/display/intel_display.c:1897:21:    expected struct i915_vma *[assigned] vma
+drivers/gpu/drm/i915/display/intel_display.c:1897:21:    got void [noderef] __iomem *[assigned] iomem
+drivers/gpu/drm/i915/display/intel_display.c:1897:21: warning: incorrect type in assignment (different address spaces)
+drivers/gpu/drm/i915/gem/i915_gem_context.c:1412:34:    expected struct i915_address_space *vm
+drivers/gpu/drm/i915/gem/i915_gem_context.c:1412:34:    got struct i915_address_space [noderef] __rcu *vm
+drivers/gpu/drm/i915/gem/i915_gem_context.c:1412:34: warning: incorrect type in argument 1 (different address spaces)
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25:    expected struct i915_address_space [noderef] __rcu *vm
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25:    got struct i915_address_space *
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:43:25: warning: incorrect type in assignment (different address spaces)
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34:    expected struct i915_address_space *vm
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34:    got struct i915_address_space [noderef] __rcu *vm
+drivers/gpu/drm/i915/gem/selftests/mock_context.c:60:34: warning: incorrect type in argument 1 (different address spaces)
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:27:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:32:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:32:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:49:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:56:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_engine_stats.h:56:9: warning: trying to copy expression type 31
+drivers/gpu/drm/i915/gt/intel_reset.c:1402:5: warning: context imbalance in 'intel_gt_reset_trylock' - different lock contexts for basic block
+drivers/gpu/drm/i915/gt/intel_ring_submission.c:1210:24: warning: Using plain integer as NULL pointer
+drivers/gpu/drm/i915/i915_perf.c:1443:15: warning: memset with byte count of 16777216
+drivers/gpu/drm/i915/i915_perf.c:1497:15: warning: memset with byte count of 16777216
+drivers/gpu/drm/i915/intel_wakeref.c:137:19: warning: context imbalance in 'wakeref_auto_timeout' - unexpected unlock
+./include/asm-generic/bitops/find.h:112:45: warning: shift count is negative (-262080)
+./include/asm-generic/bitops/find.h:32:31: warning: shift count is negative (-262080)
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen11_fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen12_fwtable_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read64' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_read8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen6_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'gen8_write8' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write16' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write32' - different lock contexts for basic block
+./include/linux/spinlock.h:409:9: warning: context imbalance in 'xehp_fwtable_write8' - different lock contexts for basic block

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#86 lore raw

[Intel-gfx] ✓ Fi.CI.BAT: success for Begin enabling Xe_HP SDV and DG2 platforms (rev5)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: Begin enabling Xe_HP SDV and DG2 platforms (rev5)
URL : https://patchwork.freedesktop.org/series/92135/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10344 -> Patchwork_20594
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/index.html

Known issues
------------

Here are the changes found in Patchwork_20594 that come from known issues:

### IGT changes ###

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[i915#1759]: https://gitlab.freedesktop.org/drm/intel/issues/1759
[i915#2373]: https://gitlab.freedesktop.org/drm/intel/issues/2373
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303

Participating hosts (39 -> 35)
------------------------------

Missing (4): fi-ilk-m540 fi-hsw-4200u fi-bdw-samus fi-bsw-n3050

Build changes
-------------

* Linux: CI_DRM_10344 -> Patchwork_20594

CI-20190529: 20190529
CI_DRM_10344: ea6974acd4fe82ca98cc1390b21af67d63c22471 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_6138: 92bf2c7865037e18946d4c3d705587c8e8c3d1b8 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_20594: f6a30552f5db556b888f087a8c82d96fed6345ad @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

f6a30552f5db drm/i915/dg2: Configure PCON in DP pre-enable path e55707db0df5 drm/i915/dg2: Update to bigjoiner path
d63a6e0c0ca0 drm/i915/dg2: Add DG2 to the PSR2 defeature list e35083bdfa80 drm/i915/dg2: Update lane disable power state during PSR 182f9e301051 drm/i915/dg2: Wait for SNPS PHY calibration during display init 9982d7730067 drm/i915/dg2: Classify DG2 PHY types
b46c8d88fd33 drm/i915/dg2: Update modeset sequences
fd3f99d8c087 drm/i915/dg2: Add vswing programming for SNPS phys 89d6432d3673 drm/i915/dg2: Add MPLLB programming for HDMI 689792bb94d6 drm/i915/dg2: Add MPLLB programming for SNPS PHY 118fc85a94ad drm/i915/dg2: DG2 has fixed memory bandwidth 60aa12c033cf drm/i915/dg2: Don't read DRAM info
cc08e720e5ae drm/i915/dg2: Don't program BW_BUDDY registers 3a7526efaf70 drm/i915/dg2: Add dbuf programming
f3d519fa8374 drm/i915/dg2: Setup display outputs
8119ad7f31ee drm/i915/dg2: Don't wait for AUX power well enable ACKs 76524872d616 drm/i915/dg2: Skip shared DPLL handling
dfa122ad3f15 drm/i915/dg2: Add cdclk table and reference clock dd67eb915449 drm/i915/dg2: Add fake PCH
1ae2606f06f9 drm/i915/dg2: Define MOCS table for DG2
c4f3a58eb9b9 drm/i915/dg2: Report INSTDONE_GEOM values in error state c6bfb5cac52e drm/i915/dg2: Maintain backward-compatible nested batch behavior 56c13089d010 drm/i915/dg2: Add new LRI reg offsets
ed945621c3f2 drm/i915/dg2: Add SQIDI steering
1232841b09bc drm/i915/dg2: Update LNCF steering ranges 462ae54b609e drm/i915/dg2: Add forcewake table
8527f182dc41 drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV 8d231c0c99c3 drm/i915/dg2: add DG2 platform info
edd8638b9ce9 drm/i915/xehpsdv: Read correct RP_STATE_CAP register 638ddf4e9d14 drm/i915/xehpsdv: factor out function to read RP_STATE_CAP 5cd632524fbb drm/i915/xehpsdv: Define MOCS table for XeHP SDV 70410e269067 drm/i915/xehpsdv: Define steering tables 9beeacbb8d15 drm/i915/xehpsdv: Add compute DSS type
381532783086 drm/i915/xehpsdv: Add maximum sseu limits b359a5197220 drm/i915/xehp: Changes to ss/eu definitions 559ec30fa734 drm/i915/xehpsdv: add initial XeHP SDV definitions f983b1241a0f drm/i915/xehp: Loop over all gslices for INSTDONE processing 733505aa0488 drm/i915/xehp: handle new steering options e6c034ba7a58 drm/i915/xehp: New engine context offsets f5a167391d70 drm/i915/xehp: Handle new device context ID format 12a2020fa1fc drm/i915/xehp: Define multicast register ranges 04721d135106 drm/i915/xehp: Xe_HP forcewake support
99c452861f03 drm/i915/xehp: Extra media engines - Part 3 (reset) 6f3c6efb8015 drm/i915/xehp: Extra media engines - Part 2 (interrupts) 75088f6dd8c2 drm/i915/xehp: Extra media engines - Part 1 (engine definitions) 25d8fcda069c drm/i915/selftests: Allow for larger engine counts 00fe5bfd2f5b drm/i915/gen12: Use fuse info to enable SFC 371d21e168c4 drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based 8bb98dab1d23 drm/i915: Fork DG1 interrupt handler
7a5fbcb1f150 drm/i915: Add XE_HP initial definitions

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/index.html

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#87 lore raw

[Intel-gfx] ✓ Fi.CI.IGT: success for Begin enabling Xe_HP SDV and DG2 platforms (rev5)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: Begin enabling Xe_HP SDV and DG2 platforms (rev5)
URL : https://patchwork.freedesktop.org/series/92135/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10344_full -> Patchwork_20594_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_20594_full:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@gem_mmap_gtt@basic-wc:
- {shard-rkl}: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-1/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-2/igt@[email protected]

* igt@kms_ccs@pipe-a-bad-rotation-90-yf_tiled_ccs:
- {shard-rkl}: [FAIL][3] ([i915#3678]) -> [SKIP][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-2/igt@kms_ccs@pipe-a-bad-rotation-90-yf_tiled_ccs.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-6/igt@kms_ccs@pipe-a-bad-rotation-90-yf_tiled_ccs.html

* igt@kms_dither@fb-8bpc-vs-panel-8bpc:
- {shard-rkl}: NOTRUN -> [SKIP][5]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-1/igt@[email protected]

* igt@runner@aborted:
- {shard-rkl}: ([FAIL][6], [FAIL][7], [FAIL][8], [FAIL][9]) ([i915#3002]) -> ([FAIL][10], [FAIL][11], [FAIL][12], [FAIL][13]) ([i915#2029] / [i915#3002])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-5/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-2/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-6/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-2/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-1/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-6/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-6/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-5/igt@[email protected]

Known issues
------------

Here are the changes found in Patchwork_20594_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_persistence@idempotent:
- shard-snb: NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#1099]) +4 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb6/igt@[email protected]

* igt@gem_exec_fair@basic-flow@rcs0:
- shard-tglb: [PASS][15] -> [FAIL][16] ([i915#2842]) +2 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-tglb5/igt@gem_exec_fair@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-iclb: NOTRUN -> [FAIL][17] ([i915#2842])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_reloc@basic-write-read-noreloc:
- shard-tglb: [PASS][18] -> [DMESG-WARN][19] ([i915#2868])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-tglb2/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@gem_exec_whisper@basic-queues-forked-all:
- shard-glk: [PASS][20] -> [DMESG-WARN][21] ([i915#118] / [i915#95]) +2 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-glk8/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-glk3/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [PASS][22] -> [FAIL][23] ([i915#307])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb4/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb8/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-tglb: NOTRUN -> [WARN][24] ([i915#2658])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@[email protected]
- shard-iclb: NOTRUN -> [WARN][25] ([i915#2658])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb6/igt@[email protected]
- shard-snb: NOTRUN -> [WARN][26] ([i915#2658])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb5/igt@[email protected]

* igt@gem_pwrite@basic-exhaustion:
- shard-kbl: NOTRUN -> [WARN][27] ([i915#2658]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl6/igt@[email protected]

* igt@gem_userptr_blits@dmabuf-sync:
- shard-kbl: NOTRUN -> [SKIP][28] ([fdo#109271] / [i915#3323])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl4/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][29] ([i915#3323])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb6/igt@[email protected]
- shard-skl: NOTRUN -> [SKIP][30] ([fdo#109271] / [i915#3323])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl6/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][31] ([i915#3323])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@[email protected]

* igt@gen3_render_mixed_blits:
- shard-iclb: NOTRUN -> [SKIP][32] ([fdo#109289]) +1 similar issue
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@gen3_render_mixed_blits.html

* igt@gen9_exec_parse@cmd-crossing-page:
- shard-iclb: NOTRUN -> [SKIP][33] ([fdo#112306])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][34] ([fdo#109271] / [i915#1937])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@i915_pm_lpsp@[email protected]

* igt@kms_big_fb@x-tiled-64bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#110725] / [fdo#111614]) +1 similar issue
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][36] ([fdo#111614])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@kms_big_fb@x-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-skl: NOTRUN -> [SKIP][37] ([fdo#109271] / [i915#3777])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl8/igt@[email protected]

* igt@kms_big_fb@y-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-apl: NOTRUN -> [SKIP][38] ([fdo#109271] / [i915#3777])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl8/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-0:
- shard-tglb: NOTRUN -> [SKIP][39] ([fdo#111615])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-0:
- shard-apl: NOTRUN -> [SKIP][40] ([fdo#109271]) +157 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl8/igt@[email protected]

* igt@kms_big_fb@yf-tiled-max-hw-stride-64bpp-rotate-0-async-flip:
- shard-iclb: NOTRUN -> [SKIP][41] ([fdo#110723])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_ccs@pipe-b-bad-rotation-90-y_tiled_ccs:
- shard-tglb: NOTRUN -> [SKIP][42] ([i915#3689]) +3 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@kms_ccs@pipe-b-bad-rotation-90-y_tiled_ccs.html

* igt@kms_ccs@pipe-d-bad-pixel-format-y_tiled_ccs:
- shard-snb: NOTRUN -> [SKIP][43] ([fdo#109271]) +287 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb6/igt@kms_ccs@pipe-d-bad-pixel-format-y_tiled_ccs.html

* igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_ccs:
- shard-glk: NOTRUN -> [SKIP][44] ([fdo#109271]) +4 similar issues
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-glk2/igt@kms_ccs@pipe-d-crc-primary-rotation-180-y_tiled_ccs.html

* igt@kms_chamelium@vga-hpd-without-ddc:
- shard-kbl: NOTRUN -> [SKIP][45] ([fdo#109271] / [fdo#111827]) +5 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl7/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-0-25:
- shard-snb: NOTRUN -> [SKIP][46] ([fdo#109271] / [fdo#111827]) +15 similar issues
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb6/igt@[email protected]

* igt@kms_color_chamelium@pipe-b-ctm-blue-to-red:
- shard-iclb: NOTRUN -> [SKIP][47] ([fdo#109284] / [fdo#111827])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-b-gamma:
- shard-apl: NOTRUN -> [SKIP][48] ([fdo#109271] / [fdo#111827]) +13 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl8/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-0-25:
- shard-iclb: NOTRUN -> [SKIP][49] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_color_chamelium@pipe-invalid-ctm-matrix-sizes:
- shard-skl: NOTRUN -> [SKIP][50] ([fdo#109271] / [fdo#111827]) +7 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl8/igt@[email protected]

* igt@kms_content_protection@atomic:
- shard-apl: NOTRUN -> [TIMEOUT][51] ([i915#1319])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl6/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-1:
- shard-iclb: NOTRUN -> [SKIP][52] ([i915#3116])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-64x64-random:
- shard-apl: NOTRUN -> [FAIL][53] ([i915#3444])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-alpha-opaque:
- shard-skl: [PASS][54] -> [FAIL][55] ([i915#3444])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl4/igt@[email protected]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl5/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-512x512-rapid-movement:
- shard-iclb: NOTRUN -> [SKIP][56] ([fdo#109278] / [fdo#109279])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-max-size-sliding:
- shard-tglb: NOTRUN -> [SKIP][57] ([i915#3359]) +1 similar issue
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-max-size-onscreen:
- shard-iclb: NOTRUN -> [SKIP][58] ([fdo#109278]) +14 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipb-atomic-transitions:
- shard-iclb: NOTRUN -> [SKIP][59] ([fdo#109274] / [fdo#109278])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size:
- shard-skl: [PASS][60] -> [FAIL][61] ([i915#2346] / [i915#533])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl5/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl3/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html

* igt@kms_cursor_legacy@pipe-d-single-bo:
- shard-apl: NOTRUN -> [SKIP][62] ([fdo#109271] / [i915#533])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl6/igt@[email protected]

* igt@kms_dp_tiled_display@basic-test-pattern:
- shard-iclb: NOTRUN -> [SKIP][63] ([i915#426])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][64] ([i915#426])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@kms_flip@2x-flip-vs-wf_vblank-interruptible:
- shard-iclb: NOTRUN -> [SKIP][65] ([fdo#109274]) +1 similar issue
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb4/igt@kms_flip@2x-flip-vs-wf_vblank-interruptible.html

* igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1:
- shard-skl: [PASS][66] -> [FAIL][67] ([i915#2122])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl1/igt@kms_flip@[email protected]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl5/igt@kms_flip@[email protected]

* igt@kms_flip@plain-flip-fb-recreate-interruptible@a-hdmi-a1:
- shard-glk: [PASS][68] -> [FAIL][69] ([i915#2122])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-glk3/igt@kms_flip@[email protected]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-glk9/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs:
- shard-kbl: NOTRUN -> [SKIP][70] ([fdo#109271] / [i915#2672])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-shrfb-fliptrack-mmap-gtt:
- shard-iclb: NOTRUN -> [SKIP][71] ([fdo#109280]) +7 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-pwrite:
- shard-skl: NOTRUN -> [SKIP][72] ([fdo#109271]) +108 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl8/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-onoff:
- shard-tglb: NOTRUN -> [SKIP][73] ([fdo#111825]) +3 similar issues
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb6/igt@[email protected]

* igt@kms_hdr@bpc-switch-suspend:
- shard-skl: [PASS][74] -> [INCOMPLETE][75] ([i915#198] / [i915#2828])
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl1/igt@[email protected]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl5/igt@[email protected]

* igt@kms_pipe_b_c_ivb@disable-pipe-b-enable-pipe-c:
- shard-tglb: NOTRUN -> [SKIP][76] ([fdo#109289])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-d-frame-sequence:
- shard-skl: NOTRUN -> [SKIP][77] ([fdo#109271] / [i915#533])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl8/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend@pipe-b-planes:
- shard-kbl: [PASS][78] -> [DMESG-WARN][79] ([i915#180])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-kbl3/igt@kms_plane@[email protected]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl4/igt@kms_plane@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-basic:
- shard-apl: NOTRUN -> [FAIL][80] ([fdo#108145] / [i915#265])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][81] ([i915#265])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min:
- shard-skl: [PASS][82] -> [FAIL][83] ([fdo#108145] / [i915#265])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl4/igt@[email protected]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl5/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: NOTRUN -> [FAIL][84] ([fdo#108145] / [i915#265]) +3 similar issues
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl10/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-alpha-basic:
- shard-kbl: NOTRUN -> [FAIL][85] ([fdo#108145] / [i915#265])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl4/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-alpha-transparent-fb:
- shard-kbl: NOTRUN -> [FAIL][86] ([i915#265])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl7/igt@[email protected]

* igt@kms_plane_lowres@pipe-d-tiling-yf:
- shard-tglb: NOTRUN -> [SKIP][87] ([fdo#112054])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb5/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-1:
- shard-tglb: NOTRUN -> [SKIP][88] ([i915#2920])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@[email protected]
- shard-skl: NOTRUN -> [SKIP][89] ([fdo#109271] / [i915#658]) +2 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl6/igt@[email protected]

* igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-3:
- shard-kbl: NOTRUN -> [SKIP][90] ([fdo#109271] / [i915#658]) +3 similar issues
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl6/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-0:
- shard-iclb: NOTRUN -> [SKIP][91] ([i915#658])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@kms_psr2_sf@plane-move-sf-dmg-area-1:
- shard-glk: NOTRUN -> [SKIP][92] ([fdo#109271] / [i915#658])
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-glk2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-5:
- shard-apl: NOTRUN -> [SKIP][93] ([fdo#109271] / [i915#658]) +1 similar issue
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-iclb: NOTRUN -> [SKIP][94] ([fdo#109441])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@kms_psr@psr2_cursor_plane_onoff.html

* igt@kms_psr@psr2_no_drrs:
- shard-iclb: [PASS][95] -> [SKIP][96] ([fdo#109441]) +3 similar issues
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb2/igt@kms_psr@psr2_no_drrs.html
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb5/igt@kms_psr@psr2_no_drrs.html

* igt@kms_setmode@basic:
- shard-snb: NOTRUN -> [FAIL][97] ([i915#31])
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb5/igt@[email protected]

* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][98] ([IGT#2])
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@kms_sysfs_edid_timing.html

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-kbl: NOTRUN -> [SKIP][99] ([fdo#109271]) +96 similar issues
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl7/igt@[email protected]

* igt@kms_vblank@pipe-a-accuracy-idle:
- shard-skl: [PASS][100] -> [FAIL][101] ([i915#43])
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl8/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl4/igt@[email protected]

* igt@kms_writeback@writeback-fb-id:
- shard-apl: NOTRUN -> [SKIP][102] ([fdo#109271] / [i915#2437])
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@nouveau_crc@pipe-b-ctx-flip-detection:
- shard-iclb: NOTRUN -> [SKIP][103] ([i915#2530])
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@nouveau_crc@pipe-d-source-outp-complete:
- shard-tglb: NOTRUN -> [SKIP][104] ([i915#2530])
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@[email protected]

* igt@perf@polling-small-buf:
- shard-skl: [PASS][105] -> [FAIL][106] ([i915#1722])
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl8/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl4/igt@[email protected]

* igt@perf_pmu@module-unload:
- shard-skl: [PASS][107] -> [DMESG-WARN][108] ([i915#1982] / [i915#262])
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-skl5/igt@[email protected]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-skl3/igt@[email protected]

* igt@prime_nv_pcopy@test_semaphore:
- shard-iclb: NOTRUN -> [SKIP][109] ([fdo#109291]) +2 similar issues
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@prime_nv_pcopy@test_semaphore.html

* igt@prime_nv_test@i915_import_gtt_mmap:
- shard-tglb: NOTRUN -> [SKIP][110] ([fdo#109291])
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb7/igt@prime_nv_test@i915_import_gtt_mmap.html

* igt@sysfs_clients@sema-10:
- shard-apl: NOTRUN -> [SKIP][111] ([fdo#109271] / [i915#2994]) +2 similar issues
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl7/igt@[email protected]

* igt@sysfs_clients@sema-25:
- shard-kbl: NOTRUN -> [SKIP][112] ([fdo#109271] / [i915#2994])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl7/igt@[email protected]

#### Possible fixes ####

* igt@feature_discovery@psr2:
- shard-iclb: [SKIP][113] ([i915#658]) -> [PASS][114]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb5/igt@[email protected]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb2/igt@[email protected]
- {shard-rkl}: [SKIP][115] ([i915#658]) -> [PASS][116]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-2/igt@[email protected]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-6/igt@[email protected]

* igt@gem_ctx_isolation@preservation-s3@rcs0:
- shard-apl: [DMESG-WARN][117] ([i915#180]) -> [PASS][118]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-apl8/igt@gem_ctx_isolation@[email protected]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-apl6/igt@gem_ctx_isolation@[email protected]

* igt@gem_ctx_persistence@many-contexts:
- shard-tglb: [FAIL][119] ([i915#2410]) -> [PASS][120]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-tglb5/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb6/igt@[email protected]

* igt@gem_exec_fair@basic-none@vcs0:
- shard-kbl: [FAIL][121] ([i915#2842]) -> [PASS][122] +3 similar issues
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-kbl2/igt@gem_exec_fair@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-kbl1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-tglb: [FAIL][123] ([i915#2842]) -> [PASS][124] +1 similar issue
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-tglb6/igt@gem_exec_fair@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- {shard-rkl}: [FAIL][125] ([i915#2842]) -> [PASS][126]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-6/igt@gem_exec_fair@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-2/igt@gem_exec_fair@[email protected]
- shard-iclb: [FAIL][127] ([i915#2849]) -> [PASS][128]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb2/igt@gem_exec_fair@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_schedule@u-independent@vecs0:
- shard-tglb: [FAIL][129] -> [PASS][130]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-tglb3/igt@gem_exec_schedule@[email protected]
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-tglb2/igt@gem_exec_schedule@[email protected]

* igt@gem_exec_suspend@basic-s4-devices:
- {shard-rkl}: [INCOMPLETE][131] -> [PASS][132]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-6/igt@[email protected]
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-1/igt@[email protected]

* igt@gem_exec_whisper@basic-contexts-priority:
- shard-iclb: [INCOMPLETE][133] ([i915#1895]) -> [PASS][134]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb7/igt@[email protected]
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-odd:
- shard-iclb: [FAIL][135] ([i915#307]) -> [PASS][136]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-iclb5/igt@[email protected]
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-iclb3/igt@[email protected]
- {shard-rkl}: [FAIL][137] ([i915#2428]) -> [PASS][138]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-rkl-1/igt@[email protected]
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-rkl-6/igt@[email protected]

* igt@i915_module_load@reload-with-fault-injection:
- shard-snb: [DMESG-WARN][139] ([i915#3389]) -> [PASS][140]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10344/shard-snb7/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/shard-snb2/igt@[email protected]

* igt@i915_selftest@live@gt_pm:
- {shard-rkl}: [DMESG-FAIL][141] ([i915#1021]) -> [PASS][142]
[141]: https://intel-gfx-ci.01.org/t

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20594/index.html

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx