add ethernet support to rk3568 dts
Subsystems (2)
v2 cover add ethernet support to rk3568 dts
Hi all,
these patches should be orthogonal to the ongoing work of Peter Geis that aims to introduce the GMAC1 node to the common RK356x dts. The GMAC0 node, which is exclusive to the RK3568, and the Ethernet phy nodes in the RK3568 EVB1 are introduced by this series.
v2:
- sort properties alphabetically
- use phy-mode "rgmii-id" without delay properties
- rename phy nodes to "ethernet-phy"
Best regards,
Michael
Michael Riesch (2):
arm64: dts: rockchip: add gmac0 node to rk3568
arm64: dts: rockchip: rk3568-evb1-v10: add ethernet support
.../boot/dts/rockchip/rk3568-evb1-v10.dts | 57 +++++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3568.dtsi | 49 ++++++++++++++++ 2 files changed, 106 insertions(+)
Signature · 1 line
2.20.1
PATCH v2 1/2 arm64: dts: rockchip: add gmac0 node to rk3568
While both RK3566 and RK3568 feature the gmac1 node, the gmac0 node is exclusive to the RK3568.
---
v2:
- sort properties alphabetically
arch/arm64/boot/dts/rockchip/rk3568.dtsi | 49 ++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
arch/arm64/boot/dts/rockchip/rk3568.dtsi +49 -0
@@ -22,6 +22,55 @@ compatible = "rockchip,rk3568-qos", "syscon"; reg = <0x0 0xfe190200 0x0 0x20>; }; + + gmac0: ethernet@fe2a0000 { + compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe2a0000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, + <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>, + <&cru PCLK_XPCS>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_refout", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref", + "pclk_xpcs"; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; }; &cpu0_opp_table {
Signature · 1 line
2.20.1
PATCH v2 2/2 arm64: dts: rockchip: rk3568-evb1-v10: add ethernet support
In reply to Michael Riesch---
v2:
- sort properties alphabetically
- use phy-mode "rgmii-id" without delay properties
- rename phy nodes to "ethernet-phy"
.../boot/dts/rockchip/rk3568-evb1-v10.dts | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+)
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +57 -0
@@ -13,6 +13,11 @@ model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + }; + chosen: chosen { stdout-path = "serial2:1500000n8"; };
@@ -67,6 +72,58 @@ }; }; +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; + }; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>;
Signature · 1 line
2.20.1
Quoted 11 lines · Michael Riesch
these patches should be orthogonal to the ongoing work of Peter Geis that aims to introduce the GMAC1 node to the common RK356x dts. The GMAC0 node, which is exclusive to the RK3568, and the Ethernet phy nodes in the RK3568 EVB1 are introduced by this series.
v2:
- sort properties alphabetically
- use phy-mode "rgmii-id" without delay properties
- rename phy nodes to "ethernet-phy"[...]
Applied, thanks!
[1/2] arm64: dts: rockchip: add gmac0 node to rk3568
commit: 2ff79e4cec9850de4df59e3902197141de7ba9ea
[2/2] arm64: dts: rockchip: rk3568-evb1-v10: add ethernet support
commit: f96f01eb249165631456e1d81aed0e2f3d4e2ceaBest regards,
Signature · 1 line
Heiko Stuebner <[email protected]>