Skip to content

add ethernet support to rk3568 dts

Michael Riesch linux-arm-kernel linux-devicetree linux-rockchip lkml 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyApplied
  2. v12 patches 7 repliesSuperseded

Changes in v2 from the cover letter

- sort properties alphabetically
- use phy-mode "rgmii-id" without delay properties
- rename phy nodes to "ethernet-phy"

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: rockchip: add gmac0 node to rk3568arch/arm64/boot/dts/rockchip/rk3568.dtsi+49 -00 replies
2/2arm64: dts: rockchip: rk3568-evb1-v10: add ethernet supportarch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts+57 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] add ethernet support to rk3568 dts

Hi all,

these patches should be orthogonal to the ongoing work of Peter Geis that aims to introduce the GMAC1 node to the common RK356x dts. The GMAC0 node, which is exclusive to the RK3568, and the Ethernet phy nodes in the RK3568 EVB1 are introduced by this series.

v2:
- sort properties alphabetically
- use phy-mode "rgmii-id" without delay properties
- rename phy nodes to "ethernet-phy"

Best regards,
Michael

Michael Riesch (2):
arm64: dts: rockchip: add gmac0 node to rk3568
arm64: dts: rockchip: rk3568-evb1-v10: add ethernet support

 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 57 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 49 ++++++++++++++++
 2 files changed, 106 insertions(+)
Signature · 1 line
2.20.1