ARM: dts: NSP: add Meraki MX64/MX65 series
Subsystems (3)
v5 cover ARM: dts: NSP: add Meraki MX64/MX65 series
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added (Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly specifying LEDs in the form "led-N" and with the color/function/ function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used (Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 + arch/arm/boot/dts/Makefile | 6 + arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++ arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++ .../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++ .../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++ arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++ .../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++ arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++ arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++ arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++ .../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++ 12 files changed, 824 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
Signature · 1 line
2.26.3
PATCH v5 1/5 ARM: dts: NSP: Add common bindings for MX64/MX65
These bindings are required for all Meraki MX64/MX65 devices. These common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND partitions, EHCI, OHCI and pinctrl.
--- .../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi new file +129 -0
@@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + + led-2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 2 50000>; + max-brightness = <255>; + }; + + led-3 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 3 50000>; + max-brightness = <255>; + }; + }; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + at24@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "shmoo"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x3f700000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + + pwm_leds: pwm_leds { + function = "pwm"; + groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; +}; + +&pwm { + status = "okay"; + #pwm-cells = <2>; +}; + +&uart0 { + clock-frequency = <62500000>; + status = "okay"; +};
Signature · 1 line
2.26.3
Florian Fainelli
AppliedRe: [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
Quoted 6 lines · Matthew Hagan
These bindings are required for all Meraki MX64/MX65 devices. These common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND partitions, EHCI, OHCI and pinctrl.
Signed-off-by Matthew Hagan <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! --
Florian
PATCH v5 2/5 ARM: dts: NSP: Add Ax stepping modifications
In reply to Matthew HaganWhile uncommon, some Ax NSP SoCs exist in the wild. This stepping requires a modified secondary CPU boot-reg and removal of DMA coherency properties. Without these modifications, the secondary CPU will be inactive and many peripherals will exhibit undefined behaviour.
--- arch/arm/boot/dts/bcm-nsp-ax.dtsi | 70 +++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
arch/arm/boot/dts/bcm-nsp-ax.dtsi new file +70 -0
@@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar Plus Ax stepping-specific bindings. + * Notable differences from B0+ are the secondary-boot-reg and + * lack of DMA coherency. + */ + +&cpu1 { + secondary-boot-reg = <0xffff042c>; +}; + +&dma { + /delete-property/ dma-coherent; +}; + +&sdio { + /delete-property/ dma-coherent; +}; + +&amac0 { + /delete-property/ dma-coherent; +}; + +&amac1 { + /delete-property/ dma-coherent; +}; + +&amac2 { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&mailbox { + /delete-property/ dma-coherent; +}; + +&xhci { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&ohci0 { + /delete-property/ dma-coherent; +}; + +&i2c0 { + /delete-property/ dma-coherent; +}; + +&sata { + /delete-property/ dma-coherent; +}; + +&pcie0 { + /delete-property/ dma-coherent; +}; + +&pcie1 { + /delete-property/ dma-coherent; +}; + +&pcie2 { + /delete-property/ dma-coherent; +};
Signature · 1 line
2.26.3
Florian Fainelli
AppliedRe: [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications
Quoted 7 lines · Matthew Hagan
While uncommon, some Ax NSP SoCs exist in the wild. This stepping requires a modified secondary CPU boot-reg and removal of DMA coherency properties. Without these modifications, the secondary CPU will be inactive and many peripherals will exhibit undefined behaviour.
Signed-off-by Matthew Hagan <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! --
Florian
PATCH v5 3/5 ARM: dts: NSP: Add DT files for Meraki MX64 series
In reply to Matthew HaganMX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
This patch adds the Meraki MX64 series-specific bindings. Since some devices make use of the older A0 SoC, changes need to be made to accommodate this case, including removal of coherency options and modification to the secondary-boot-reg.
--- arch/arm/boot/dts/Makefile | 4 + .../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++++++++++ .../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 +++ arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 +++ .../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 ++++ arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++++ 6 files changed, 281 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
arch/arm/boot/dts/Makefile +4 -0
@@ -155,6 +155,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958525xmc.dtb \ bcm958622hr.dtb \ bcm958623hr.dtb \ + bcm958625-meraki-mx64.dtb \ + bcm958625-meraki-mx64-a0.dtb \ + bcm958625-meraki-mx64w.dtb \ + bcm958625-meraki-mx64w-a0.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb
arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi new file +163 -0
163 lines not on this page · raw message
arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64(A0)"; + compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +};
arch/arm/boot/dts/bcm958625-meraki-mx64.dts new file +24 -0
@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64"; + compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +};
arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts new file +33 -0
@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64W(A0)"; + compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +};
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64W"; + compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +};
Signature · 1 line
2.26.3
Florian Fainelli
AppliedRe: [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
Quoted 9 lines · Matthew Hagan
MX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
Quoted 7 lines
This patch adds the Meraki MX64 series-specific bindings. Since some devices make use of the older A0 SoC, changes need to be made to accommodate this case, including removal of coherency options and modification to the secondary-boot-reg.
Signed-off-by Matthew Hagan <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! --
Florian
PATCH v5 4/5 ARM: dts: NSP: Add DT files for Meraki MX65 series
In reply to Matthew HaganMX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been released under GPL, but this is not present in the kernel.
--- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++ arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++ arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++ 4 files changed, 337 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
arch/arm/boot/dts/Makefile +2 -0
@@ -159,6 +159,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958625-meraki-mx64-a0.dtb \ bcm958625-meraki-mx64w.dtb \ bcm958625-meraki-mx64w-a0.dtb \ + bcm958625-meraki-mx65.dtb \ + bcm958625-meraki-mx65w.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi new file +279 -0
279 lines not on this page · raw message
arch/arm/boot/dts/bcm958625-meraki-mx65.dts new file +24 -0
@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65"; + compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +};
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65W. + * + * Copyright (C) 2020-2021 Matthew Hagan <[email protected]> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65W"; + compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +};
Signature · 1 line
2.26.3
Florian Fainelli
AppliedRe: [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
Quoted 11 lines · Matthew Hagan
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)2x Qualcomm QCA8337 switches (10x 1GbE ports total)- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Quoted 5 lines
Note that a driver and firmware image for the BCM59111 PSE has been released under GPL, but this is not present in the kernel.
Signed-off-by Matthew Hagan <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! --
Florian
PATCH v5 5/5 dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
In reply to Matthew HaganAdd bindings for the Meraki MX64/MX65 series.
--- Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +6 -0
@@ -62,6 +62,12 @@ properties: - enum: - brcm,bcm958625hr - brcm,bcm958625k + - meraki,mx64 + - meraki,mx64-a0 + - meraki,mx64w + - meraki,mx64w-a0 + - meraki,mx65 + - meraki,mx65w - const: brcm,bcm58625 - const: brcm,nsp
Signature · 1 line
2.26.3
Florian Fainelli
AppliedRe: [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
Quoted 5 lines · Matthew Hagan
Add bindings for the Meraki MX64/MX65 series.
Signed-off-by Matthew Hagan <[email protected]>Acked-by Rob Herring <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian
Quoted 27 lines · Matthew Hagan
Changes from v2:
- Introduce boards toMakefilein same patch as the board dts is added (Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilisingdt-bindings/leds/common.hand correctly specifying LEDs in the form "led-N" and with the color/function/ function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used (Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir Oltean)
- In addition to above, relocate mdio-mux tobcm-nsp.dtsiand fix the resultingusb3_phyissuesChanges from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives forinput/input.handleds/common.htobcm958625-mx6x-common.dtsi- Whitespace fixes in
bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Quoted 8 lines
Changes from v4:
- Move chosen and memory nodes frombcm958625-mx6x-common.dtsito each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
I applied patch 1 first such that we don't get warnings when we apply patches from there on during bisection builds.
Signature · 1 line
Florian