Enable triggered perf query for Xe_HP
Subsystems (3)
cover Enable triggered perf query for Xe_HP
This is a revival of the patch series to support triggered perf query reports from here - https://patchwork.freedesktop.org/series/83831/
The patches were not pushed earlier because corresponding UMD changes were missing. This revival addresses UMD changes in GPUvis for this series. GPUvis uses the perf library in igt-gpu-tools. Changes to the library are here -
https://patchwork.freedesktop.org/series/93355/
GPUvis changes will be posted as a PR once the above library and kernel changes are pushed.
Summary of the feature:
Current platforms provide MI_REPORT_PERF_COUNT to query a snapshot of perf counters from a batch. This mechanism does not have consistent support on all engines for newer platforms. To support perf query, all new platforms use a mechanism to trigger OA report snapshots into the OA buffer by writing to a HW register from a batch. To lookup this report in the OA buffer quickly, the OA buffer is mmapped into the user space.
This series implements the new query mechanism.
v2: Fix BAT failure (Umesh)
v3: Fix selftest (Umesh)
v4: Update uapi comment (Umesh)
Test-with: [email protected]
Chris Wilson (3):
drm/i915/gt: Refactor _wa_add to reuse wa_index and wa_list_grow drm/i915/gt: Check for conflicting RING_NONPRIV drm/i915/gt: Enable dynamic adjustment of RING_NONPRIV
Piotr Maciejewski (1):
drm/i915/perf: Ensure observation logic is not clock gated
Umesh Nerlige Ramappa (4):
drm/i915/gt: Lock intel_engine_apply_whitelist with uncore->lock drm/i915/perf: Whitelist OA report trigger registers drm/i915/perf: Whitelist OA counter and buffer registers drm/i915/perf: Map OA buffer to user space for gen12 performance query
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_mman.h | 2 + drivers/gpu/drm/i915/gt/intel_workarounds.c | 269 +++++++++++++----- drivers/gpu/drm/i915/gt/intel_workarounds.h | 7 + .../gpu/drm/i915/gt/selftest_workarounds.c | 267 +++++++++++++++++ drivers/gpu/drm/i915/i915_perf.c | 228 ++++++++++++++- drivers/gpu/drm/i915/i915_perf_types.h | 8 + drivers/gpu/drm/i915/i915_reg.h | 30 +- include/uapi/drm/i915_drm.h | 33 +++ 9 files changed, 758 insertions(+), 88 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/8 drm/i915/gt: Lock intel_engine_apply_whitelist with uncore->lock
Refactor intel_engine_apply_whitelist into locked and unlocked versions so that a caller who already has the lock can apply whitelist.
v2: Fix sparse warning
v3: (Chris)
- Drop prefix and suffix for static function
- Use longest to shortest line ordering for variable declaration
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 46 ++++++++++++++------- 1 file changed, 32 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +32 -14
@@ -1248,7 +1248,8 @@ void intel_gt_init_workarounds(struct drm_i915_private *i915) }static enum forcewake_domains -wal_get_fw_for_rmw (struct intel_uncore *uncore,const struct i915_wa_list *wal) +wal_get_fw (struct intel_uncore *uncore,const struct i915_wa_list *wal, +unsigned int op) {enum forcewake_domains fw =0 ;struct i915_wa *wa;
@@ -1257,8 +1258,7 @@ wal_get_fw_for_rmw(struct intel_uncore *uncore, const struct i915_wa_list *wal)for (i =0 , wa = wal->list; i < wal->count; i++, wa++) fw |=intel_uncore_forcewake_for_reg (uncore, wa->reg, -FW_REG_READ | -FW_REG_WRITE ); + op);return fw; }
@@ -1289,7 +1289,7 @@ wa_list_apply(struct intel_gt *gt, const struct i915_wa_list *wal)if (!wal->count)return ; - fw =wal_get_fw_for_rmw (uncore, wal); + fw =wal_get_fw (uncore, wal,FW_REG_READ |FW_REG_WRITE );spin_lock_irqsave (&uncore->lock, flags);intel_uncore_forcewake_get__locked (uncore, fw);
@@ -1328,7 +1328,7 @@ static bool wa_list_verify(struct intel_gt *gt,unsigned int i;bool ok = true; - fw =wal_get_fw_for_rmw (uncore, wal); + fw =wal_get_fw (uncore, wal,FW_REG_READ |FW_REG_WRITE );spin_lock_irqsave (&uncore->lock, flags);intel_uncore_forcewake_get__locked (uncore, fw);
@@ -1617,27 +1617,45 @@ void intel_engine_init_whitelist(struct intel_engine_cs *engine)wa_init_finish (w); } -void intel_engine_apply_whitelist (struct intel_engine_cs *engine) +static void __engine_apply_whitelist (struct intel_engine_cs *engine) {const struct i915_wa_list *wal = &engine->whitelist;struct intel_uncore *uncore = engine->uncore;const u32 base = engine->mmio_base; +enum forcewake_domains fw;struct i915_wa *wa;unsigned int i; -if (!wal->count) -return ; +lockdep_assert_held (&uncore->lock); + + fw =wal_get_fw (uncore, wal,FW_REG_WRITE ); +intel_uncore_forcewake_get__locked (uncore, fw);for (i =0 , wa = wal->list; i < wal->count; i++, wa++) -intel_uncore_write (uncore, -RING_FORCE_TO_NONPRIV (base, i), -i915_mmio_reg_offset (wa->reg)); +intel_uncore_write_fw (uncore, +RING_FORCE_TO_NONPRIV (base, i), +i915_mmio_reg_offset (wa->reg));/* And clear the rest just in case of garbage */ for (; i <RING_MAX_NONPRIV_SLOTS ; i++) -intel_uncore_write (uncore, -RING_FORCE_TO_NONPRIV (base, i), -i915_mmio_reg_offset (RING_NOPID (base))); +intel_uncore_write_fw (uncore, +RING_FORCE_TO_NONPRIV (base, i), +i915_mmio_reg_offset (RING_NOPID (base))); + +intel_uncore_forcewake_put__locked (uncore, fw); +} + +void intel_engine_apply_whitelist (struct intel_engine_cs *engine) +{ +const struct i915_wa_list *wal = &engine->whitelist; +unsigned long flags; + +if (!wal->count) +return ; + +spin_lock_irqsave (&engine->uncore->lock, flags); +__engine_apply_whitelist (engine); +spin_unlock_irqrestore (&engine->uncore->lock, flags); } static void
Signature · 1 line
2.20.1
PATCH 2/8 drm/i915/gt: Refactor _wa_add to reuse wa_index and wa_list_grow
In reply to Umesh Nerlige RamappaFrom: Chris Wilson <[email protected]>
Switch the search and grow code of the _wa_add to use _wa_index and _wa_list_grow.
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 124 +++++++++++--------- 1 file changed, 71 insertions(+), 53 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +71 -53
@@ -60,20 +60,19 @@ static void wa_init_start(struct i915_wa_list *wal, const char *name, const char#define WA_LIST_CHUNK (1 << 4) -static void wa_init_finish (struct i915_wa_list *wal) +static void wa_trim (struct i915_wa_list *wal,gfp_t gfp) { +struct i915_wa *list; +/* Trim unused entries. */ -if (!IS_ALIGNED (wal->count,WA_LIST_CHUNK )) { -struct i915_wa *list =kmemdup (wal->list, - wal->count *sizeof (*list), -GFP_KERNEL ); - -if (list) { -kfree (wal->list); - wal->list = list; - } - } + list =krealloc (wal->list, wal->count *sizeof (*list), gfp); +if (list) + wal->list = list; +} +static void wa_init_finish (struct i915_wa_list *wal) +{ +wa_trim (wal,GFP_KERNEL );if (!wal->count)return ;
@@ -81,57 +80,60 @@ static void wa_init_finish(struct i915_wa_list *wal) wal->wa_count, wal->name, wal->engine_name); } -static void _wa_add (struct i915_wa_list *wal,const struct i915_wa *wa) +static int wa_index (struct i915_wa_list *wal,i915_reg_t reg) { -unsigned int addr =i915_mmio_reg_offset (wa->reg); -unsigned int start =0 , end = wal->count; -const unsigned int grow =WA_LIST_CHUNK ; -struct i915_wa *wa_; +unsigned int addr =i915_mmio_reg_offset (reg); +int start =0 , end = wal->count; -GEM_BUG_ON (!is_power_of_2 (grow)); +/* addr and wal->list[].reg, both include the R/W flags */ +while (start < end) { +unsigned int mid = start + (end - start) /2 ; -if (IS_ALIGNED (wal->count, grow)) {/* Either uninitialized or full. */ -struct i915_wa *list; +if (i915_mmio_reg_offset (wal->list[mid].reg) < addr) + start = mid +1 ; +else if (i915_mmio_reg_offset (wal->list[mid].reg) > addr) + end = mid; +else +return mid; + } - list =kmalloc_array (ALIGN (wal->count +1 , grow),sizeof (*wa), -GFP_KERNEL ); -if (!list) { -DRM_ERROR ("No space for workaround init!\n" ); -return ; - } +return -ENOENT ; +} -if (wal->list) { -memcpy (list, wal->list,sizeof (*wa) * wal->count); -kfree (wal->list); - } +static int wa_list_grow (struct i915_wa_list *wal,size_t count,gfp_t gfp) +{ +struct i915_wa *list; - wal->list = list; - } + list =krealloc (wal->list, count *sizeof (*list), gfp); +if (!list) +return -ENOMEM ; -while (start < end) { -unsigned int mid = start + (end - start) /2 ; + wal->list = list; +return 0 ; +} -if (i915_mmio_reg_offset (wal->list[mid].reg) < addr) { - start = mid +1 ; - }else if (i915_mmio_reg_offset (wal->list[mid].reg) > addr) { - end = mid; - }else { - wa_ = &wal->list[mid]; - -if ((wa->clr | wa_->clr) && !(wa->clr & ~wa_->clr)) { -DRM_ERROR ("Discarding overwritten w/a for reg %04x (clear: %08x, set: %08x)\n" , -i915_mmio_reg_offset (wa_->reg), - wa_->clr, wa_->set); - - wa_->set &= ~wa->clr; - } - - wal->wa_count++; - wa_->set |= wa->set; - wa_->clr |= wa->clr; - wa_->read |= wa->read; -return ; +static void __wa_add (struct i915_wa_list *wal,const struct i915_wa *wa) +{ +struct i915_wa *wa_; +int index; + + index =wa_index (wal, wa->reg); +if (index >=0 ) { + wa_ = &wal->list[index]; + +if ((wa->clr | wa_->clr) && !(wa->clr & ~wa_->clr)) { +DRM_ERROR ("Discarding overwritten w/a for reg %04x (clear: %08x, set: %08x)\n" , +i915_mmio_reg_offset (wa_->reg), + wa_->clr, wa_->set); + + wa_->set &= ~wa->clr; } + + wal->wa_count++; + wa_->set |= wa->set; + wa_->clr |= wa->clr; + wa_->read |= wa->read; +return ; } wal->wa_count++;
@@ -149,6 +151,22 @@ static void _wa_add(struct i915_wa_list *wal, const struct i915_wa *wa) } } +static void _wa_add (struct i915_wa_list *wal,const struct i915_wa *wa) +{ +const unsigned int grow =WA_LIST_CHUNK ; + +GEM_BUG_ON (!is_power_of_2 (grow)); + +if (IS_ALIGNED (wal->count, grow) &&/* Either uninitialized or full. */ +wa_list_grow (wal,ALIGN (wal->count +1 , grow),GFP_KERNEL )) { +DRM_ERROR ("Unable to store w/a for reg %04x\n" , +i915_mmio_reg_offset (wa->reg)); +return ; + } + +__wa_add (wal, wa); +} +static void wa_add (struct i915_wa_list *wal,i915_reg_t reg,u32 clear,u32 set,u32 read_mask,bool masked_reg) {
Signature · 1 line
2.20.1
PATCH 3/8 drm/i915/gt: Check for conflicting RING_NONPRIV
In reply to Umesh Nerlige RamappaFrom: Chris Wilson <[email protected]>
Strip the encoded bits from the register offset so that we only use the address for looking up the RING_NONPRIV entry.
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 66 +++++++++++++-------- 1 file changed, 42 insertions(+), 24 deletions(-)
drivers/gpu/drm/i915/gt/intel_workarounds.c +42 -24
@@ -80,18 +80,44 @@ static void wa_init_finish(struct i915_wa_list *wal) wal->wa_count, wal->name, wal->engine_name); } +static u32 reg_offset (i915_reg_t reg) +{ +return i915_mmio_reg_offset (reg) &RING_FORCE_TO_NONPRIV_ADDRESS_MASK ; +} + +static u32 reg_flags (i915_reg_t reg) +{ +return i915_mmio_reg_offset (reg) & ~RING_FORCE_TO_NONPRIV_ADDRESS_MASK ; +} + +__maybe_unused +static bool is_nonpriv_flags_valid (u32 flags) +{ +/* Check only valid flag bits are set */ +if (flags & ~RING_FORCE_TO_NONPRIV_MASK_VALID ) +return false; + +/* NB: Only 3 out of 4 enum values are valid for access field */ +if ((flags &RING_FORCE_TO_NONPRIV_ACCESS_MASK ) == +RING_FORCE_TO_NONPRIV_ACCESS_INVALID ) +return false; + +return true; +} +static int wa_index (struct i915_wa_list *wal,i915_reg_t reg) { -unsigned int addr =i915_mmio_reg_offset (reg);int start =0 , end = wal->count; +u32 addr =reg_offset (reg);/* addr and wal->list[].reg, both include the R/W flags */ while (start < end) {unsigned int mid = start + (end - start) /2 ; +u32 pos =reg_offset (wal->list[mid].reg); -if (i915_mmio_reg_offset (wal->list[mid].reg) < addr) +if (pos < addr) start = mid +1 ; -else if (i915_mmio_reg_offset (wal->list[mid].reg) > addr) +else if (pos > addr) end = mid;else return mid;
@@ -117,13 +143,22 @@ static void __wa_add(struct i915_wa_list *wal, const struct i915_wa *wa)struct i915_wa *wa_;int index; +GEM_BUG_ON (!is_nonpriv_flags_valid (reg_flags (wa->reg))); + index =wa_index (wal, wa->reg);if (index >=0 ) { wa_ = &wal->list[index]; +if (i915_mmio_reg_offset (wa->reg) != +i915_mmio_reg_offset (wa_->reg)) { +DRM_ERROR ("Discarding incompatible w/a for reg %04x\n" , +reg_offset (wa->reg)); +return ; + } +if ((wa->clr | wa_->clr) && !(wa->clr & ~wa_->clr)) {DRM_ERROR ("Discarding overwritten w/a for reg %04x (clear: %08x, set: %08x)\n" , -i915_mmio_reg_offset (wa_->reg), +reg_offset (wa_->reg), wa_->clr, wa_->set); wa_->set &= ~wa->clr;
@@ -141,10 +176,8 @@ static void __wa_add(struct i915_wa_list *wal, const struct i915_wa *wa) *wa_ = *wa;while (wa_-- > wal->list) { -GEM_BUG_ON (i915_mmio_reg_offset (wa_[0 ].reg) == -i915_mmio_reg_offset (wa_[1 ].reg)); -if (i915_mmio_reg_offset (wa_[1 ].reg) > -i915_mmio_reg_offset (wa_[0 ].reg)) +GEM_BUG_ON (reg_offset (wa_[0 ].reg) ==reg_offset (wa_[1 ].reg)); +if (reg_offset (wa_[1 ].reg) >reg_offset (wa_[0 ].reg))break ;swap (wa_[1 ], wa_[0 ]);
@@ -160,7 +193,7 @@ static void _wa_add(struct i915_wa_list *wal, const struct i915_wa *wa)if (IS_ALIGNED (wal->count, grow) &&/* Either uninitialized or full. */ wa_list_grow (wal,ALIGN (wal->count +1 , grow),GFP_KERNEL )) {DRM_ERROR ("Unable to store w/a for reg %04x\n" , -i915_mmio_reg_offset (wa->reg)); +reg_offset (wa->reg));return ; }
@@ -1367,21 +1400,6 @@ bool intel_gt_verify_workarounds(struct intel_gt *gt, const char *from)return wa_list_verify (gt, >->i915->gt_wa_list, from); } -__maybe_unused -static bool is_nonpriv_flags_valid (u32 flags) -{ -/* Check only valid flag bits are set */ -if (flags & ~RING_FORCE_TO_NONPRIV_MASK_VALID ) -return false; - -/* NB: Only 3 out of 4 enum values are valid for access field */ -if ((flags &RING_FORCE_TO_NONPRIV_ACCESS_MASK ) == -RING_FORCE_TO_NONPRIV_ACCESS_INVALID ) -return false; - -return true; -} -static void whitelist_reg_ext (struct i915_wa_list *wal,i915_reg_t reg,u32 flags) {
Signature · 1 line
2.20.1
kernel test robot
build botRe: [Intel-gfx] [PATCH 3/8] drm/i915/gt: Check for conflicting RING_NONPRIV
Thank you for the patch! Perhaps something to improve:
Hi Umesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on drm-intel/for-linux-next]
[also build test WARNING on drm-tip/drm-tip drm-exynos/exynos-drm-next next-20210830] [cannot apply to tegra-drm/drm/tegra/for-next linus/master drm/drm-next v5.14] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Umesh-Nerlige-Ramappa/Enable-triggered-perf-query-for-Xe_HP/20210831-034105 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: x86_64-randconfig-a004-20210830 (attached as .config) compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 4b1fde8a2b681dad2ce0c082a5d6422caa06b0bc)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/81219176b43209d12b8212d1281fbfed9546087f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Umesh-Nerlige-Ramappa/Enable-triggered-perf-query-for-Xe_HP/20210831-034105 git checkout 81219176b43209d12b8212d1281fbfed9546087f
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
>> drivers/gpu/drm/i915/gt/intel_workarounds.c:88:12: warning: function 'reg_flags' is not needed and will not be emitted [-Wunneeded-internal-declaration]
static u32 reg_flags(i915_reg_t reg)
^1 warning generated.
vim +/reg_flags +88 drivers/gpu/drm/i915/gt/intel_workarounds.c
87
> 88 static u32 reg_flags(i915_reg_t reg)
89 {
90 return i915_mmio_reg_offset(reg) & ~RING_FORCE_TO_NONPRIV_ADDRESS_MASK;
91 }
92 ---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
PATCH 4/8 drm/i915/gt: Enable dynamic adjustment of RING_NONPRIV
In reply to Umesh Nerlige RamappaFrom: Chris Wilson <[email protected]>
The OA subsystem would like to enable its privileged clients access to the OA registers from execbuf. This requires temporarily removing the HW validation from those registers for the duration of the OA client, for which we need to allow OA to dynamically adjust the set of RING_NONPRIV.
Care must still be taken since the RING_NONPRIV are global, so any and all contexts that run at the same time as the OA client, will also be able to adjust the registers from their execbuf.
v2: Fix memmove size (Umesh)
v3: Update selftest (Umesh)
- Use ppgtt for results
- Use ww locking
- Prevent rc6. Whitelist configuration is saved/restored on rc6, so applying whitelist configuration with rc6 enabled leads to a race where the pwr ctx restored configuration conflicts with the most recently applied config in the selftest.
--- drivers/gpu/drm/i915/gt/intel_workarounds.c | 59 ++++ drivers/gpu/drm/i915/gt/intel_workarounds.h | 7 + .../gpu/drm/i915/gt/selftest_workarounds.c | 267 ++++++++++++++++++ 3 files changed, 333 insertions(+)
drivers/gpu/drm/i915/gt/intel_workarounds.c +59 -0
@@ -200,6 +200,18 @@ static void _wa_add(struct i915_wa_list *wal, const struct i915_wa *wa)__wa_add (wal, wa); } +static void _wa_del (struct i915_wa_list *wal,i915_reg_t reg) +{ +struct i915_wa *wa = wal->list; +int index; + + index =wa_index (wal, reg); +if (GEM_DEBUG_WARN_ON (index <0 )) +return ; + +memmove (wa + index, wa + index +1 , (--wal->count - index) *sizeof (*wa)); +} +static void wa_add (struct i915_wa_list *wal,i915_reg_t reg,u32 clear,u32 set,u32 read_mask,bool masked_reg) {
@@ -2152,6 +2164,53 @@ void intel_engine_init_workarounds(struct intel_engine_cs *engine)wa_init_finish (wal); } +int intel_engine_allow_user_register_access (struct intel_engine_cs *engine, +const i915_reg_t *reg, +unsigned int count) +{ +struct i915_wa_list *wal = &engine->whitelist; +unsigned long flags; +int err; + +if (GEM_DEBUG_WARN_ON (wal->count + count >=RING_MAX_NONPRIV_SLOTS )) +return -ENOSPC ; + +spin_lock_irqsave (&engine->uncore->lock, flags); + + err =wa_list_grow (wal, wal->count + count,GFP_ATOMIC | __GFP_NOWARN); +if (err) + goto out; + +while (count--) { +struct i915_wa wa = { .reg = *reg++ }; + +__wa_add (wal, &wa); + } + +__engine_apply_whitelist (engine); + +out: +spin_unlock_irqrestore (&engine->uncore->lock, flags); +return err; +} + +void intel_engine_deny_user_register_access (struct intel_engine_cs *engine, +const i915_reg_t *reg, +unsigned int count) +{ +struct i915_wa_list *wal = &engine->whitelist; +unsigned long flags; + +spin_lock_irqsave (&engine->uncore->lock, flags); + +while (count--) +_wa_del (wal, *reg++); + +__engine_apply_whitelist (engine); + +spin_unlock_irqrestore (&engine->uncore->lock, flags); +} +void intel_engine_apply_workarounds (struct intel_engine_cs *engine) {wa_list_apply (engine->gt, &engine->wa_list);
drivers/gpu/drm/i915/gt/intel_workarounds.h +7 -0
@@ -36,4 +36,11 @@ void intel_engine_apply_workarounds(struct intel_engine_cs *engine);int intel_engine_verify_workarounds (struct intel_engine_cs *engine,const char *from); +int intel_engine_allow_user_register_access (struct intel_engine_cs *engine, +const i915_reg_t *reg, +unsigned int count); +void intel_engine_deny_user_register_access (struct intel_engine_cs *engine, +const i915_reg_t *reg, +unsigned int count); +#endif
drivers/gpu/drm/i915/gt/selftest_workarounds.c +267 -0
279 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 5/8 drm/i915/perf: Ensure observation logic is not clock gated
In reply to Umesh Nerlige RamappaFrom: Piotr Maciejewski <[email protected]>
A clock gating switch can control if the performance monitoring and observation logic is enaled or not. Ensure that we enable the clocks.
v2: Separate code from other patches (Lionel)
v3: Reset PMON enable when disabling perf to save power (Lionel)
v4: Use intel_uncore_rmw and REG_BIT (Chris)
--- drivers/gpu/drm/i915/i915_perf.c | 9 +++++++++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ 2 files changed, 11 insertions(+)
drivers/gpu/drm/i915/i915_perf.c +9 -0
@@ -2553,6 +2553,12 @@ gen12_enable_metric_set(struct i915_perf_stream *stream, (period_exponent << GEN12_OAG_OAGLBCTXCTRL_TIMER_PERIOD_SHIFT)) : 0); +/* +* Initialize Super Queue Internal Cnt Register +* Set PMON Enable in order to collect valid metrics. +*/ +intel_uncore_rmw (uncore,GEN12_SQCNT1 ,0 ,GEN12_SQCNT1_PMON_ENABLE ); +/* * Update all contexts prior writing the mux configurations as we need * to make sure all slices/subslices are ON before writing to NOA
@@ -2612,6 +2618,9 @@ static void gen12_disable_metric_set(struct i915_perf_stream *stream)/* Make sure we disable noa to save power. */ intel_uncore_rmw (uncore,RPM_CONFIG1 ,GEN10_GT_NOA_ENABLE ,0 ); + +/* Reset PMON Enable to save power. */ +intel_uncore_rmw (uncore,GEN12_SQCNT1 ,GEN12_SQCNT1_PMON_ENABLE ,0 ); }static void gen7_oa_enable (struct i915_perf_stream *stream)
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -718,6 +718,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define OABUFFER_SIZE_16M (7 << 3)#define GEN12_OA_TLB_INV_CR _MMIO(0xceec) +#define GEN12_SQCNT1 _MMIO(0x8718) +#define GEN12_SQCNT1_PMON_ENABLE REG_BIT(30)/* Gen12 OAR unit */ #define GEN12_OAR_OACONTROL _MMIO(0x2960)
Signature · 1 line
2.20.1
PATCH 6/8 drm/i915/perf: Whitelist OA report trigger registers
In reply to Umesh Nerlige RamappaOA reports can be triggered into the OA buffer by writing into the OAREPORTTRIG registers. Whitelist the registers to allow non-privileged user to trigger reports.
Whitelist registers only if perf_stream_paranoid is set to 0. In i915_perf_open_ioctl, this setting is checked and the whitelist is enabled accordingly. On closing the perf fd, the whitelist is removed.
This ensures that the access to the whitelist is gated by perf_stream_paranoid.
v2:
- Move related change to this patch (Lionel)
- Bump up perf revision (Lionel)
v3: Pardon whitelisted registers for selftest (Umesh)
v4: Document supported gens for the feature (Lionel)
v5: Whitelist registers only if perf_stream_paranoid is set to 0 (Jon)
v6: Move oa whitelist array to i915_perf (Chris)
v7: Fix OA writing beyond the wal->list memory (CI)
v8: Protect write to engine whitelist registers
v9: (Umesh)
- Use uncore->lock to protect write to forcepriv regs
- In case wal->count falls to zero on _wa_remove, make sure you still clear the registers. Remove wal->count check when applying whitelist.
v10: (Umesh)
- Split patches modifying intel_workarounds
- On some platforms there are no whitelisted regs. intel_engine_resume applies whitelist on these platforms too and the wal->count gates such platforms. Bring back the wal->count check.
- intel_engine_allow/deny_user_register_access modifies the engine whitelist and the wal->count. Use uncore->lock to serialize it with intel_engine_apply_whitelist.
- Grow the wal->list when adding whitelist registers after driver load.
v11:
- Fix memory leak in _wa_list_grow (Chris)
- Serialize kfree with engine resume using uncore->lock (Umesh)
- Grow the list only if wal->count is not aligned (Umesh)
--- drivers/gpu/drm/i915/i915_perf.c | 79 +++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_perf_types.h | 8 +++ drivers/gpu/drm/i915/i915_reg.h | 12 ++-- 3 files changed, 92 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_perf.c +76 -3
@@ -1364,12 +1364,56 @@ free_noa_wait(struct i915_perf_stream *stream)i915_vma_unpin_and_release (&stream->noa_wait,0 ); } +static const i915_reg_t gen9_oa_wl_regs[] = { + { __OAREPORTTRIG2 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, + { __OAREPORTTRIG6 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, +}; + +static const i915_reg_t gen12_oa_wl_regs[] = { + { __GEN12_OAG_OAREPORTTRIG2 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, + { __GEN12_OAG_OAREPORTTRIG6 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, +}; + +static int intel_engine_apply_oa_whitelist (struct i915_perf_stream *stream) +{ +struct intel_engine_cs *engine = stream->engine; +int ret; + +if (i915_perf_stream_paranoid || + !(stream->sample_flags &SAMPLE_OA_REPORT ) || + !stream->perf->oa_wl) +return 0 ; + + ret =intel_engine_allow_user_register_access (engine, + stream->perf->oa_wl, + stream->perf->num_oa_wl); +if (ret <0 ) +return ret; + + stream->oa_whitelisted = true; +return 0 ; +} + +static void intel_engine_remove_oa_whitelist (struct i915_perf_stream *stream) +{ +struct intel_engine_cs *engine = stream->engine; + +if (!stream->oa_whitelisted) +return ; + +intel_engine_deny_user_register_access (engine, + stream->perf->oa_wl, + stream->perf->num_oa_wl); +} +static void i915_oa_stream_destroy (struct i915_perf_stream *stream) {struct i915_perf *perf = stream->perf;BUG_ON (stream != perf->exclusive_stream); +intel_engine_remove_oa_whitelist (stream); +/* * Unset exclusive_stream first, it will be checked while disabling * the metric set on gen8+.
@@ -1465,7 +1509,8 @@ static void gen8_init_oa_buffer(struct i915_perf_stream *stream)* bit." */ intel_uncore_write (uncore,GEN8_OABUFFER , gtt_offset | -OABUFFER_SIZE_16M |GEN8_OABUFFER_MEM_SELECT_GGTT ); +OABUFFER_SIZE_16M |GEN8_OABUFFER_MEM_SELECT_GGTT | +GEN7_OABUFFER_EDGE_TRIGGER );intel_uncore_write (uncore,GEN8_OATAILPTR , gtt_offset &GEN8_OATAILPTR_MASK );/* Mark that we need updated tail pointers to read from... */
@@ -1518,7 +1563,8 @@ static void gen12_init_oa_buffer(struct i915_perf_stream *stream)* bit." */ intel_uncore_write (uncore,GEN12_OAG_OABUFFER , gtt_offset | -OABUFFER_SIZE_16M |GEN8_OABUFFER_MEM_SELECT_GGTT ); +OABUFFER_SIZE_16M |GEN8_OABUFFER_MEM_SELECT_GGTT | +GEN7_OABUFFER_EDGE_TRIGGER );intel_uncore_write (uncore,GEN12_OAG_OATAILPTR , gtt_offset &GEN12_OAG_OATAILPTR_MASK );
@@ -3530,6 +3576,20 @@ i915_perf_open_ioctl_locked(struct i915_perf *perf,if (!(param->flags &I915_PERF_FLAG_DISABLED ))i915_perf_enable_locked (stream); +/* +* OA whitelist allows non-privileged access to some OA counters for +* triggering reports into the OA buffer. This is only allowed if +* perf_stream_paranoid is set to 0 by the sysadmin. +* +* We want to make sure this is almost the last thing we do before +* returning the stream fd. If we do end up checking for errors in code +* that follows this, we MUST call intel_engine_remove_oa_whitelist in +* the error handling path to remove the whitelisted registers. +*/ + ret =intel_engine_apply_oa_whitelist (stream); +if (ret <0 ) + goto err_flags; +/* Take a reference on the driver that will be kept with stream_fd * until its release. */
@@ -4410,6 +4470,8 @@ void i915_perf_init(struct drm_i915_private *i915) perf->ctx_flexeu0_offset =0x3de ; perf->gen8_valid_ctx_bit =BIT (16 ); + perf->oa_wl = gen9_oa_wl_regs; + perf->num_oa_wl =ARRAY_SIZE (gen9_oa_wl_regs); } }else if (GRAPHICS_VER (i915) ==11 ) { perf->ops.is_valid_b_counter_reg =
@@ -4428,6 +4490,9 @@ void i915_perf_init(struct drm_i915_private *i915) perf->ctx_oactxctrl_offset =0x124 ; perf->ctx_flexeu0_offset =0x78e ; + perf->oa_wl = gen9_oa_wl_regs; + perf->num_oa_wl =ARRAY_SIZE (gen9_oa_wl_regs); + perf->gen8_valid_ctx_bit =BIT (16 ); }else if (GRAPHICS_VER (i915) ==12 ) { perf->ops.is_valid_b_counter_reg =
@@ -4445,6 +4510,9 @@ void i915_perf_init(struct drm_i915_private *i915) perf->ctx_flexeu0_offset =0 ; perf->ctx_oactxctrl_offset =0x144 ; + + perf->oa_wl = gen12_oa_wl_regs; + perf->num_oa_wl =ARRAY_SIZE (gen12_oa_wl_regs); } }
@@ -4550,8 +4618,13 @@ int i915_perf_ioctl_version(void)* * 5: Add DRM_I915_PERF_PROP_POLL_OA_PERIOD parameter that controls the * interval for the hrtimer used to check for OA data. +* +* 6: Whitelist OATRIGGER registers to allow user to trigger reports +* into the OA buffer. This applies only to gen8+. The feature can +* only be accessed if perf_stream_paranoid is set to 0 by privileged +* user. */ -return 5 ; +return 6 ; }#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )
drivers/gpu/drm/i915/i915_perf_types.h +8 -0
@@ -312,6 +312,11 @@ struct i915_perf_stream {* buffer should be checked for available data. */ u64 poll_oa_period; + +/** +* @oa_whitelisted: Indicates that the oa registers are whitelisted. +*/ +bool oa_whitelisted; };/**
@@ -432,6 +437,9 @@ struct i915_perf {u32 ctx_oactxctrl_offset;u32 ctx_flexeu0_offset; +const i915_reg_t *oa_wl; +unsigned int num_oa_wl; +/** * The RPT_ID/reason field for Gen8+ includes a bit * to determine if the CTX ID in the report is valid
drivers/gpu/drm/i915/i915_reg.h +8 -4
@@ -894,7 +894,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define OAREPORTTRIG1_THRESHOLD_MASK 0xffff#define OAREPORTTRIG1_EDGE_LEVEL_TRIGGER_SELECT_MASK 0xffff0000/* 0=level */ -#define OAREPORTTRIG2 _MMIO(0x2744) +#define __OAREPORTTRIG2 0x2744 +#define OAREPORTTRIG2 _MMIO(__OAREPORTTRIG2)#define OAREPORTTRIG2_INVERT_A_0 (1 << 0)#define OAREPORTTRIG2_INVERT_A_1 (1 << 1)#define OAREPORTTRIG2_INVERT_A_2 (1 << 2)
@@ -947,7 +948,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define OAREPORTTRIG5_THRESHOLD_MASK 0xffff#define OAREPORTTRIG5_EDGE_LEVEL_TRIGGER_SELECT_MASK 0xffff0000/* 0=level */ -#define OAREPORTTRIG6 _MMIO(0x2754) +#define __OAREPORTTRIG6 0x2754 +#define OAREPORTTRIG6 _MMIO(__OAREPORTTRIG6)#define OAREPORTTRIG6_INVERT_A_0 (1 << 0)#define OAREPORTTRIG6_INVERT_A_1 (1 << 1)#define OAREPORTTRIG6_INVERT_A_2 (1 << 2)
@@ -1008,11 +1010,13 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)/* Same layout as OAREPORTTRIGX */ #define GEN12_OAG_OAREPORTTRIG1 _MMIO(0xd920) -#define GEN12_OAG_OAREPORTTRIG2 _MMIO(0xd924) +#define __GEN12_OAG_OAREPORTTRIG2 0xd924 +#define GEN12_OAG_OAREPORTTRIG2 _MMIO(__GEN12_OAG_OAREPORTTRIG2)#define GEN12_OAG_OAREPORTTRIG3 _MMIO(0xd928)#define GEN12_OAG_OAREPORTTRIG4 _MMIO(0xd92c)#define GEN12_OAG_OAREPORTTRIG5 _MMIO(0xd930) -#define GEN12_OAG_OAREPORTTRIG6 _MMIO(0xd934) +#define __GEN12_OAG_OAREPORTTRIG6 0xd934 +#define GEN12_OAG_OAREPORTTRIG6 _MMIO(__GEN12_OAG_OAREPORTTRIG6)#define GEN12_OAG_OAREPORTTRIG7 _MMIO(0xd938)#define GEN12_OAG_OAREPORTTRIG8 _MMIO(0xd93c)
Signature · 1 line
2.20.1
PATCH 7/8 drm/i915/perf: Whitelist OA counter and buffer registers
In reply to Umesh Nerlige RamappaIt is useful to have markers in the OA reports to identify triggered reports. Whitelist some OA counters that can be used as markers.
A triggered report can be found faster if we can sample the HW tail and head registers when the report was triggered. Whitelist OA buffer specific registers.
v2:
- Bump up the perf revision (Lionel)
- Use indexing for counters (Lionel)
- Fix selftest for oa ticking register (Umesh)
v3: Pardon whitelisted registers for selftest (Umesh)
v4:
- Document whitelisted registers (Lionel)
- Fix live isolated whitelist for OA regs (Umesh)
v5:
- Free up whitelist slots. Remove GPU_TICKS and A20 counter (Piotr)
- Whitelist registers only if perf_stream_paranoid is set to 0 (Jon)
v6: Move oa whitelist array to i915_perf (Chris)
--- drivers/gpu/drm/i915/i915_perf.c | 18 +++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 16 ++++++++++++++-- 2 files changed, 31 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_perf.c +17 -1
@@ -1367,11 +1367,19 @@ free_noa_wait(struct i915_perf_stream *stream)static const i915_reg_t gen9_oa_wl_regs[] = { { __OAREPORTTRIG2 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, { __OAREPORTTRIG6 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, + {__OA_PERF_COUNTER_A (18 ) | (RING_FORCE_TO_NONPRIV_ACCESS_RW | +RING_FORCE_TO_NONPRIV_RANGE_4 ) }, + { __GEN8_OASTATUS | (RING_FORCE_TO_NONPRIV_ACCESS_RD | +RING_FORCE_TO_NONPRIV_RANGE_4 ) }, };static const i915_reg_t gen12_oa_wl_regs[] = { { __GEN12_OAG_OAREPORTTRIG2 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, { __GEN12_OAG_OAREPORTTRIG6 |RING_FORCE_TO_NONPRIV_ACCESS_RW }, + {__GEN12_OAG_PERF_COUNTER_A (18 ) | (RING_FORCE_TO_NONPRIV_ACCESS_RW | +RING_FORCE_TO_NONPRIV_RANGE_4 ) }, + { __GEN12_OAG_OASTATUS | (RING_FORCE_TO_NONPRIV_ACCESS_RD | +RING_FORCE_TO_NONPRIV_RANGE_4 ) }, };static int intel_engine_apply_oa_whitelist (struct i915_perf_stream *stream)
@@ -4623,8 +4631,16 @@ int i915_perf_ioctl_version(void)* into the OA buffer. This applies only to gen8+. The feature can * only be accessed if perf_stream_paranoid is set to 0 by privileged * user. +* +* 7: Whitelist below OA registers for user to identify the location of +* triggered reports in the OA buffer. This applies only to gen8+. +* The feature can only be accessed if perf_stream_paranoid is set to +* 0 by privileged user. +* +* - OA buffer head/tail/status/buffer registers for read only +* - OA counters A18, A19, A20 for read/write */ -return 6 ; +return 7 ; }#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )
drivers/gpu/drm/i915/i915_reg.h +14 -2
@@ -695,7 +695,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN7_OASTATUS2_HEAD_MASK 0xffffffc0#define GEN7_OASTATUS2_MEM_SELECT_GGTT (1 << 0)/* 0: PPGTT, 1: GGTT */ -#define GEN8_OASTATUS _MMIO(0x2b08) +#define __GEN8_OASTATUS 0x2b08 +#define GEN8_OASTATUS _MMIO(__GEN8_OASTATUS)#define GEN8_OASTATUS_TAIL_POINTER_WRAP (1 << 17)#define GEN8_OASTATUS_HEAD_POINTER_WRAP (1 << 16)#define GEN8_OASTATUS_OVERRUN_STATUS (1 << 3)
@@ -755,7 +756,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define GEN12_OAG_OA_DEBUG_DISABLE_GO_1_0_REPORTS (1 << 2)#define GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS (1 << 1) -#define GEN12_OAG_OASTATUS _MMIO(0xdafc) +#define __GEN12_OAG_OASTATUS 0xdafc +#define GEN12_OAG_OASTATUS _MMIO(__GEN12_OAG_OASTATUS)#define GEN12_OAG_OASTATUS_COUNTER_OVERFLOW (1 << 2)#define GEN12_OAG_OASTATUS_BUFFER_OVERFLOW (1 << 1)#define GEN12_OAG_OASTATUS_REPORT_LOST (1 << 0)
@@ -998,6 +1000,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)#define OAREPORTTRIG8_NOA_SELECT_6_SHIFT 24#define OAREPORTTRIG8_NOA_SELECT_7_SHIFT 28 +/* Performance counters registers */ +#define __OA_PERF_COUNTER_A (idx) (0x2800 + 8 * (idx)) +#define OA_PERF_COUNTER_A (idx) _MMIO(__OA_PERF_COUNTER_A(idx)) +#define OA_PERF_COUNTER_A_UDW (idx) _MMIO(__OA_PERF_COUNTER_A(idx) + 4) + +/* Gen12 Performance counters registers */ +#define __GEN12_OAG_PERF_COUNTER_A (idx) (0xD980 + 8 * (idx)) +#define GEN12_OAG_PERF_COUNTER_A (idx) _MMIO(__GEN12_OAG_PERF_COUNTER_A(idx)) +#define GEN12_OAG_PERF_COUNTER_A_UDW (idx) _MMIO(__GEN12_OAG_PERF_COUNTER_A(idx) + 4) +/* Same layout as OASTARTTRIGX */ #define GEN12_OAG_OASTARTTRIG1 _MMIO(0xd900)#define GEN12_OAG_OASTARTTRIG2 _MMIO(0xd904)
Signature · 1 line
2.20.1
PATCH 8/8 drm/i915/perf: Map OA buffer to user space for gen12 performance query
In reply to Umesh Nerlige Ramappai915 used to support time based sampling mode which is good for overall system monitoring, but is not enough for query mode used to measure a single draw call or dispatch. Gen9-Gen11 are using current i915 perf implementation for query, but Gen12+ requires a new approach for query based on triggered reports within oa buffer.
Triggering reports into the OA buffer is achieved by writing into a a trigger register. Optionally an unused counter/register is set with a marker value such that a triggered report can be identified in the OA buffer. Reports are usually triggered at the start and end of work that is measured.
Since OA buffer is large and queries can be frequent, an efficient way to look for triggered reports is required. By knowing the current head and tail offsets into the OA buffer, it is easier to determine the locality of the reports of interest.
Current perf OA interface does not expose head/tail information to the user and it filters out invalid reports before sending data to user. Also considering limited size of user buffer used during a query, creating a 1:1 copy of the OA buffer at the user space added undesired complexity.
The solution was to map the OA buffer to user space provided
(1) that it is accessed from a privileged user.
(2) OA report filtering is not used.
These 2 conditions would satisfy the safety criteria that the current perf interface addresses.
To enable the query:
- Add an ioctl to expose head and tail to the user
- Add an ioctl to return size and offset of the OA buffer
- Map the OA buffer to the user space
v2:
- Improve commit message (Chris)
- Do not mmap based on gem object filp. Instead, use perf_fd and support mmap syscall (Chris)
- Pass non-zero offset in mmap to enforce the right object is mapped (Chris)
- Do not expose gpu_address (Chris)
- Verify start and length of vma for page alignment (Lionel)
- Move SQNTL config out (Lionel)
v3: (Chris)
- Omit redundant checks
- Return VM_FAULT_SIGBUS is old stream is closed
- Maintain reference counts to stream in vm_open and vm_close
- Use switch to identify object to be mapped
v4: Call kref_put on closing perf fd (Chris)
v5:
- Strip access to OA buffer from unprivileged child of a privileged parent. Use VM_DONTCOPY
- Enforce MAP_PRIVATE by checking for VM_MAYSHARE
v6:
(Chris)
- Use len of -1 in unmap_mapping_range
- Don't use stream->oa_buffer.vma->obj in vm_fault_oa
- Use kernel block comment style
- do_mmap gets a reference to the file and puts it in do_munmap, so no need to maintain a reference to i915_perf_stream. Hence, remove vm_open/vm_close and stream->closed hooks/checks.
(Umesh)
- Do not allow mmap if SAMPLE_OA_REPORT is not set during i915_perf_open_ioctl.
- Drop ioctl returning head/tail since this information is already whitelisted. Remove hooks to read head register.
v7: (Chris)
- unmap before destroy
- change ioctl argument struct
v8: Documentation and more checks (Chris)
v9: Fix comment style (Umesh)
v10: Update uapi comment (Ashutosh)
--- drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_mman.h | 2 + drivers/gpu/drm/i915/i915_perf.c | 126 ++++++++++++++++++++++- include/uapi/drm/i915_drm.h | 33 ++++++ 4 files changed, 161 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_mman.c +1 -1
@@ -213,7 +213,7 @@ compute_partial_view(const struct drm_i915_gem_object *obj,return view; } -static vm_fault_t i915_error_to_vmf_fault (int err) +vm_fault_t i915_error_to_vmf_fault (int err) {switch (err) {default :
drivers/gpu/drm/i915/gem/i915_gem_mman.h +2 -0
@@ -29,4 +29,6 @@ void i915_gem_object_release_mmap_gtt(struct drm_i915_gem_object *obj);void i915_gem_object_release_mmap_offset (struct drm_i915_gem_object *obj); +vm_fault_t i915_error_to_vmf_fault (int err); +#endif
drivers/gpu/drm/i915/i915_perf.c +125 -1
173 lines not on this page · raw message
include/uapi/drm/i915_drm.h +33 -0
@@ -2417,6 +2417,39 @@ struct drm_i915_perf_open_param {*/ #define I915_PERF_IOCTL_CONFIG _IO('i', 0x2) +/* +* Returns OA buffer properties to be used with mmap. +* +* This ioctl is available in perf revision 8. +*/ +#define I915_PERF_IOCTL_GET_OA_BUFFER_INFO _IOWR('i', 0x3, struct drm_i915_perf_oa_buffer_info) + +/* +* OA buffer size and offset. +* +* OA output buffer +* type: 0 +* flags: mbz +* +* After querying the info, pass (size,offset) to mmap(), +* +* mmap(0, info.size, PROT_READ, MAP_PRIVATE, perf_fd, info.offset). +* +* Note that only a private (not shared between processes, or across fork()) +* read-only mmapping is allowed. +* +* HW is continually writing data to the mapped OA buffer and it conforms to +* the OA format as specified by user config. The buffer provides reports that +* have OA counters - A, B and C. +*/ +struct drm_i915_perf_oa_buffer_info { +__u32 type;/* in */ +__u32 flags;/* in */ +__u64 size;/* out */ +__u64 offset;/* out */ +__u64 rsvd;/* mbz */ +}; +/* * Common to all i915 perf records */
Signature · 1 line
2.20.1
Re: [PATCH 8/8] drm/i915/perf: Map OA buffer to user space for gen12 performance query
Quoted 23 lines · Umesh Nerlige Ramappa
i915 used to support time based sampling mode which is good for overall system monitoring, but is not enough for query mode used to measure a single draw call or dispatch. Gen9-Gen11 are using current i915 perf implementation for query, but Gen12+ requires a new approach for query based on triggered reports within oa buffer.
Triggering reports into the OA buffer is achieved by writing into a a trigger register. Optionally an unused counter/register is set with a marker value such that a triggered report can be identified in the OA buffer. Reports are usually triggered at the start and end of work that is measured.
Since OA buffer is large and queries can be frequent, an efficient way to look for triggered reports is required. By knowing the current head and tail offsets into the OA buffer, it is easier to determine the locality of the reports of interest.
Current perf OA interface does not expose head/tail information to the user and it filters out invalid reports before sending data to user. Also considering limited size of user buffer used during a query, creating a 1:1 copy of the OA buffer at the user space added undesired complexity.
Quoted 7 lines
The solution was to map the OA buffer to user space provided
(1) that it is accessed from a privileged user.
(2) OA report filtering is not used.These 2 conditions would satisfy the safety criteria that the current perf interface addresses.
This is a perf improvement. Please include benchmark numbers to justify it.
Quoted 273 lines
To enable the query:
- Add an ioctl to expose head and tail to the user
- Add an ioctl to return size and offset of the OA buffer
- Map the OA buffer to the user spacev2:
- Improve commit message (Chris)
- Do not mmap based on gem object filp. Instead, useperf_fdand support mmap syscall (Chris)
- Pass non-zero offset in mmap to enforce the right object is mapped (Chris)
- Do not exposegpu_address(Chris)
- Verify start and length of vma for page alignment (Lionel)
- Move SQNTL config out (Lionel)v3: (Chris)
- Omit redundant checks
- ReturnVM_FAULT_SIGBUSis old stream is closed
- Maintain reference counts to stream invm_openandvm_close
- Use switch to identify object to be mappedv4: Call
kref_puton closing perf fd (Chris)
v5:
- Strip access to OA buffer from unprivileged child of a privileged parent. UseVM_DONTCOPY
- EnforceMAP_PRIVATEby checking forVM_MAYSHAREv6:
(Chris)
- Use len of -1 inunmap_mapping_range
- Don't usestream->oa_buffer.vma->objinvm_fault_oa
- Use kernel block comment style
-do_mmapgets a reference to the file and puts it indo_munmap, so no need to maintain a reference toi915_perf_stream. Hence, remove vm_open/vm_close andstream->closedhooks/checks.
(Umesh)
- Do not allow mmap ifSAMPLE_OA_REPORTis not set duringi915_perf_open_ioctl.
- Drop ioctl returning head/tail since this information is already whitelisted. Remove hooks to read head register.v7: (Chris)
- unmap before destroy
- change ioctl argument structv8: Documentation and more checks (Chris)
v9: Fix comment style (Umesh)
v10: Update uapi comment (Ashutosh)Signed-off-by Piotr Maciejewski <[email protected]>Signed-off-by Umesh Nerlige Ramappa <[email protected]>Reviewed-by Chris Wilson <[email protected]>--- drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_mman.h | 2 + drivers/gpu/drm/i915/i915_perf.c | 126 ++++++++++++++++++++++- include/uapi/drm/i915_drm.h | 33 ++++++ 4 files changed, 161 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/gem/i915_gem_mman.c +1
-1@@ -213,7 +213,7 @@ compute_partial_view(const struct drm_i915_gem_object *obj,return view; } -static vm_fault_t i915_error_to_vmf_fault (int err) +vm_fault_t i915_error_to_vmf_fault (int err) {switch (err) {default :drivers/gpu/drm/i915/gem/i915_gem_mman.h +2
-0@@ -29,4 +29,6 @@ void i915_gem_object_release_mmap_gtt(struct drm_i915_gem_object *obj);void i915_gem_object_release_mmap_offset (struct drm_i915_gem_object *obj); +vm_fault_t i915_error_to_vmf_fault (int err); +#endif drivers/gpu/drm/i915/i915_perf.c +125
-1@@ -192,10 +192,12 @@*/ #include <linux/anon_inodes.h> +#include <linux/mman.h> #include <linux/sizes.h> #include <linux/uuid.h> #include "gem/i915_gem_context.h" +#include "gem/i915_gem_mman.h" #include "gt/intel_engine_pm.h" #include "gt/intel_engine_user.h" #include "gt/intel_execlists_submission.h" @@ -3322,6 +3324,44 @@ static long i915_perf_config_locked(struct i915_perf_stream *stream,return ret; } +#define I915_PERF_OA_BUFFER_MMAP_OFFSET 1 + +/** +* i915_perf_oa_buffer_info_locked - size and offset of the OA buffer +* @stream: i915 perf stream +* @cmd: ioctl command +* @arg: pointer to oa buffer info filled by this function. +*/ +static int i915_perf_oa_buffer_info_locked (struct i915_perf_stream *stream, +unsigned int cmd, +unsigned long arg) +{ +struct drm_i915_perf_oa_buffer_info info; +void __user *output = (void __user *)arg; + +if (i915_perf_stream_paranoid && !perfmon_capable ()) { +DRM_DEBUG ("Insufficient privileges to access OA buffer info\n" ); +return -EACCES ; + } + +if (_IOC_SIZE (cmd) !=sizeof (info)) +return -EINVAL ; + +if (copy_from_user (&info, output,sizeof (info))) +return -EFAULT ; + +if (info.type || info.flags || info.rsvd) +return -EINVAL ; + + info.size = stream->oa_buffer.vma->size; + info.offset =I915_PERF_OA_BUFFER_MMAP_OFFSET *PAGE_SIZE ; + +if (copy_to_user (output, &info,sizeof (info))) +return -EFAULT ; + +return 0 ; +} +/** * i915_perf_ioctl_locked - support ioctl() usage with i915 perf stream FDs * @stream: An i915 perf stream @@ -3347,6 +3387,8 @@ static long i915_perf_ioctl_locked(struct i915_perf_stream *stream,return 0 ;case I915_PERF_IOCTL_CONFIG :return i915_perf_config_locked (stream, arg); +case I915_PERF_IOCTL_GET_OA_BUFFER_INFO : +return i915_perf_oa_buffer_info_locked (stream, cmd, arg); }return -EINVAL ;@@ -3418,6 +3460,14 @@ static int i915_perf_release(struct inode *inode, struct file *file)struct i915_perf_stream *stream = file->private_data;struct i915_perf *perf = stream->perf; +/* +* User could have multiple vmas from multiple mmaps. We want to zap +* them all here. Note that a fresh fault cannot occur as the mmap holds +* a reference to the stream via the vma->vm_file, so before user's +* munmap, the stream cannot be destroyed. +*/ +unmap_mapping_range (file->f_mapping,0 ,-1 ,1 ); +mutex_lock (&perf->lock);i915_perf_destroy_locked (stream);mutex_unlock (&perf->lock);@@ -3428,6 +3478,75 @@ static int i915_perf_release(struct inode *inode, struct file *file)return 0 ; } +static vm_fault_t vm_fault_oa (struct vm_fault *vmf) +{ +struct vm_area_struct *vma = vmf->vma; +struct i915_perf_stream *stream = vma->vm_private_data; +int err; + + err =remap_io_sg (vma, + vma->vm_start, vma->vm_end - vma->vm_start, + stream->oa_buffer.vma->pages->sgl,-1 ); + +return i915_error_to_vmf_fault (err); +} + +static const struct vm_operations_struct vm_ops_oa = { + .fault = vm_fault_oa, +}; + +static int i915_perf_mmap (struct file *file,struct vm_area_struct *vma) +{ +struct i915_perf_stream *stream = file->private_data; + +/* mmap-ing OA buffer to user space MUST absolutely be privileged */ +if (i915_perf_stream_paranoid && !perfmon_capable ()) { +DRM_DEBUG ("Insufficient privileges to map OA buffer\n" ); +return -EACCES ; + } + +switch (vma->vm_pgoff) { +/* +* A non-zero offset ensures that we are mapping the right object. Also +* leaves room for future objects added to this implementation. +*/ +case I915_PERF_OA_BUFFER_MMAP_OFFSET : +if (!(stream->sample_flags &SAMPLE_OA_REPORT )) +return -EINVAL ; + +if (vma->vm_end - vma->vm_start > stream->oa_buffer.vma->size) +return -EINVAL ; + +/* +* Only support VM_READ. Enforce MAP_PRIVATE by checking for +* VM_MAYSHARE. +*/ +if (vma->vm_flags & (VM_WRITE |VM_EXEC | +VM_SHARED |VM_MAYSHARE )) +return -EINVAL ; + + vma->vm_flags &= ~(VM_MAYWRITE |VM_MAYEXEC ); + +/* +* If the privileged parent forks and child drops root +* privilege, we do not want the child to retain access to the +* mapped OA buffer. Explicitly set VM_DONTCOPY to avoid such +* cases. +*/ + vma->vm_flags |=VM_PFNMAP |VM_DONTEXPAND | +VM_DONTDUMP |VM_DONTCOPY ; +break ; + +default : +return -EINVAL ; + } + + vma->vm_page_prot =vm_get_page_prot (vma->vm_flags); + vma->vm_private_data = stream; + vma->vm_ops = &vm_ops_oa; + +return 0 ; +}static const struct file_operations fops = { .owner =THIS_MODULE ,@@ -3440,6 +3559,7 @@ static const struct file_operations fops = {* to handle 32bits compatibility. */ .compat_ioctl = i915_perf_ioctl, + .mmap = i915_perf_mmap, };@@ -4639,8 +4759,12 @@ int i915_perf_ioctl_version(void)* * - OA buffer head/tail/status/buffer registers for read only * - OA counters A18, A19, A20 for read/write +* +* 8: Added an option to map oa buffer at umd driver level and trigger +* oa reports within oa buffer from command buffer. See +* I915_PERF_IOCTL_GET_OA_BUFFER_INFO. */ -return 7 ; +return 8 ; }#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )include/uapi/drm/i915_drm.h +0
-0
include/uapi/drm/i915_drm.h struct drm_i915_perf_open_param { · line 2420
Quoted 4 lines
include/uapi/drm/i915_drm.h +1
-0@@ -2417,6 +2417,39 @@ struct drm_i915_perf_open_param {*/ #define I915_PERF_IOCTL_CONFIG _IO('i', 0x2) +/*
Please make this proper kerneldoc. Ideally also fix up all the other perf related uapi and also document it all with kerneldoc.
Please make sure the result looks good with
$ make htmldocs
Also, this is uapi, therefore your patch needs to include
- link to the igts for this
- link to the userspace MR that uses this (I guess it's mesa?)
Cheers, Daniel
Quoted 38 lines
include/uapi/drm/i915_drm.h +32
-0+* Returns OA buffer properties to be used with mmap. +* +* This ioctl is available in perf revision 8. +*/ +#define I915_PERF_IOCTL_GET_OA_BUFFER_INFO _IOWR('i', 0x3, struct drm_i915_perf_oa_buffer_info) + +/* +* OA buffer size and offset. +* +* OA output buffer +* type: 0 +* flags: mbz +* +* After querying the info, pass (size,offset) to mmap(), +* +* mmap(0, info.size, PROT_READ, MAP_PRIVATE, perf_fd, info.offset). +* +* Note that only a private (not shared between processes, or across fork()) +* read-only mmapping is allowed. +* +* HW is continually writing data to the mapped OA buffer and it conforms to +* the OA format as specified by user config. The buffer provides reports that +* have OA counters - A, B and C. +*/ +struct drm_i915_perf_oa_buffer_info { +__u32 type;/* in */ +__u32 flags;/* in */ +__u64 size;/* out */ +__u64 offset;/* out */ +__u64 rsvd;/* mbz */ +}; +/* * Common to all i915 perf records */ Signature · 1 line
2.20.1
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Re: [PATCH 8/8] drm/i915/perf: Map OA buffer to user space for gen12 performance query
Quoted 26 lines · Daniel Vetter
Quoted 25 lines · Umesh Nerlige Ramappa
i915 used to support time based sampling mode which is good for overall system monitoring, but is not enough for query mode used to measure a single draw call or dispatch. Gen9-Gen11 are using current i915 perf implementation for query, but Gen12+ requires a new approach for query based on triggered reports within oa buffer.
Triggering reports into the OA buffer is achieved by writing into a a trigger register. Optionally an unused counter/register is set with a marker value such that a triggered report can be identified in the OA buffer. Reports are usually triggered at the start and end of work that is measured.
Since OA buffer is large and queries can be frequent, an efficient way to look for triggered reports is required. By knowing the current head and tail offsets into the OA buffer, it is easier to determine the locality of the reports of interest.
Current perf OA interface does not expose head/tail information to the user and it filters out invalid reports before sending data to user. Also considering limited size of user buffer used during a query, creating a 1:1 copy of the OA buffer at the user space added undesired complexity.
The solution was to map the OA buffer to user space provided
Quoted 8 lines
Quoted 5 lines
(1) that it is accessed from a privileged user.
(2) OA report filtering is not used.These 2 conditions would satisfy the safety criteria that the current perf interface addresses.
This is a perf improvement. Please include benchmark numbers to justify it.
OA supports 2 mechanisms of perf measurements.
1) query interface where perf countes can be queried.
2) OA buffer use case where counter-snapshots are captured periodically and analyzed for performance.
This patch series is actually just (1) query interface implementation for discrete and not a perf improvement.
The old mechanism to query OA report (MI_REPORT_PERF_COUNT) is not available for all engines. In the new mechanism, a query is triggered from a batch by writing to a whitelisted OA trigger register. Once a query is triggered, the resulting report is captured in the OA buffer. To locate the report quickly, the batch also captures the OA HW tail pointer before/after writing to the trigger register. This gives the user a window/locality in the OA buffer where the report of interest lies.
For this new mechanism, the current interface to read reports from the OA buffer is inefficient since the reads are sequential and reports are copied to user buffer.
mmap provides an accurate and faster way to fetch the queried reports based on locality.
Note that mmap does not replace the OA buffer use case from (2) which still reads reports sequentially to analyze performance.
Quoted 282 lines
Quoted 274 lines
To enable the query:
- Add an ioctl to expose head and tail to the user
- Add an ioctl to return size and offset of the OA buffer
- Map the OA buffer to the user spacev2:
- Improve commit message (Chris)
- Do not mmap based on gem object filp. Instead, useperf_fdand support mmap syscall (Chris)
- Pass non-zero offset in mmap to enforce the right object is mapped (Chris)
- Do not exposegpu_address(Chris)
- Verify start and length of vma for page alignment (Lionel)
- Move SQNTL config out (Lionel)v3: (Chris)
- Omit redundant checks
- ReturnVM_FAULT_SIGBUSis old stream is closed
- Maintain reference counts to stream invm_openandvm_close
- Use switch to identify object to be mappedv4: Call
kref_puton closing perf fd (Chris)
v5:
- Strip access to OA buffer from unprivileged child of a privileged parent. UseVM_DONTCOPY
- EnforceMAP_PRIVATEby checking forVM_MAYSHAREv6:
(Chris)
- Use len of -1 inunmap_mapping_range
- Don't usestream->oa_buffer.vma->objinvm_fault_oa
- Use kernel block comment style
-do_mmapgets a reference to the file and puts it indo_munmap, so no need to maintain a reference toi915_perf_stream. Hence, remove vm_open/vm_close andstream->closedhooks/checks.
(Umesh)
- Do not allow mmap ifSAMPLE_OA_REPORTis not set duringi915_perf_open_ioctl.
- Drop ioctl returning head/tail since this information is already whitelisted. Remove hooks to read head register.v7: (Chris)
- unmap before destroy
- change ioctl argument structv8: Documentation and more checks (Chris)
v9: Fix comment style (Umesh)
v10: Update uapi comment (Ashutosh)Signed-off-by Piotr Maciejewski <[email protected]>Signed-off-by Umesh Nerlige Ramappa <[email protected]>Reviewed-by Chris Wilson <[email protected]>--- drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +- drivers/gpu/drm/i915/gem/i915_gem_mman.h | 2 + drivers/gpu/drm/i915/i915_perf.c | 126 ++++++++++++++++++++++- include/uapi/drm/i915_drm.h | 33 ++++++ 4 files changed, 161 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/gem/i915_gem_mman.c +1
-1@@ -213,7 +213,7 @@ compute_partial_view(const struct drm_i915_gem_object *obj,return view; } -static vm_fault_t i915_error_to_vmf_fault (int err) +vm_fault_t i915_error_to_vmf_fault (int err) {switch (err) {default :drivers/gpu/drm/i915/gem/i915_gem_mman.h +2
-0@@ -29,4 +29,6 @@ void i915_gem_object_release_mmap_gtt(struct drm_i915_gem_object *obj);void i915_gem_object_release_mmap_offset (struct drm_i915_gem_object *obj); +vm_fault_t i915_error_to_vmf_fault (int err); +#endif drivers/gpu/drm/i915/i915_perf.c +125
-1@@ -192,10 +192,12 @@*/ #include <linux/anon_inodes.h> +#include <linux/mman.h> #include <linux/sizes.h> #include <linux/uuid.h> #include "gem/i915_gem_context.h" +#include "gem/i915_gem_mman.h" #include "gt/intel_engine_pm.h" #include "gt/intel_engine_user.h" #include "gt/intel_execlists_submission.h" @@ -3322,6 +3324,44 @@ static long i915_perf_config_locked(struct i915_perf_stream *stream,return ret; } +#define I915_PERF_OA_BUFFER_MMAP_OFFSET 1 + +/** +* i915_perf_oa_buffer_info_locked - size and offset of the OA buffer +* @stream: i915 perf stream +* @cmd: ioctl command +* @arg: pointer to oa buffer info filled by this function. +*/ +static int i915_perf_oa_buffer_info_locked (struct i915_perf_stream *stream, +unsigned int cmd, +unsigned long arg) +{ +struct drm_i915_perf_oa_buffer_info info; +void __user *output = (void __user *)arg; + +if (i915_perf_stream_paranoid && !perfmon_capable ()) { +DRM_DEBUG ("Insufficient privileges to access OA buffer info\n" ); +return -EACCES ; + } + +if (_IOC_SIZE (cmd) !=sizeof (info)) +return -EINVAL ; + +if (copy_from_user (&info, output,sizeof (info))) +return -EFAULT ; + +if (info.type || info.flags || info.rsvd) +return -EINVAL ; + + info.size = stream->oa_buffer.vma->size; + info.offset =I915_PERF_OA_BUFFER_MMAP_OFFSET *PAGE_SIZE ; + +if (copy_to_user (output, &info,sizeof (info))) +return -EFAULT ; + +return 0 ; +} +/** * i915_perf_ioctl_locked - support ioctl() usage with i915 perf stream FDs * @stream: An i915 perf stream @@ -3347,6 +3387,8 @@ static long i915_perf_ioctl_locked(struct i915_perf_stream *stream,return 0 ;case I915_PERF_IOCTL_CONFIG :return i915_perf_config_locked (stream, arg); +case I915_PERF_IOCTL_GET_OA_BUFFER_INFO : +return i915_perf_oa_buffer_info_locked (stream, cmd, arg); }return -EINVAL ;@@ -3418,6 +3460,14 @@ static int i915_perf_release(struct inode *inode, struct file *file)struct i915_perf_stream *stream = file->private_data;struct i915_perf *perf = stream->perf; +/* +* User could have multiple vmas from multiple mmaps. We want to zap +* them all here. Note that a fresh fault cannot occur as the mmap holds +* a reference to the stream via the vma->vm_file, so before user's +* munmap, the stream cannot be destroyed. +*/ +unmap_mapping_range (file->f_mapping,0 ,-1 ,1 ); +mutex_lock (&perf->lock);i915_perf_destroy_locked (stream);mutex_unlock (&perf->lock);@@ -3428,6 +3478,75 @@ static int i915_perf_release(struct inode *inode, struct file *file)return 0 ; } +static vm_fault_t vm_fault_oa (struct vm_fault *vmf) +{ +struct vm_area_struct *vma = vmf->vma; +struct i915_perf_stream *stream = vma->vm_private_data; +int err; + + err =remap_io_sg (vma, + vma->vm_start, vma->vm_end - vma->vm_start, + stream->oa_buffer.vma->pages->sgl,-1 ); + +return i915_error_to_vmf_fault (err); +} + +static const struct vm_operations_struct vm_ops_oa = { + .fault = vm_fault_oa, +}; + +static int i915_perf_mmap (struct file *file,struct vm_area_struct *vma) +{ +struct i915_perf_stream *stream = file->private_data; + +/* mmap-ing OA buffer to user space MUST absolutely be privileged */ +if (i915_perf_stream_paranoid && !perfmon_capable ()) { +DRM_DEBUG ("Insufficient privileges to map OA buffer\n" ); +return -EACCES ; + } + +switch (vma->vm_pgoff) { +/* +* A non-zero offset ensures that we are mapping the right object. Also +* leaves room for future objects added to this implementation. +*/ +case I915_PERF_OA_BUFFER_MMAP_OFFSET : +if (!(stream->sample_flags &SAMPLE_OA_REPORT )) +return -EINVAL ; + +if (vma->vm_end - vma->vm_start > stream->oa_buffer.vma->size) +return -EINVAL ; + +/* +* Only support VM_READ. Enforce MAP_PRIVATE by checking for +* VM_MAYSHARE. +*/ +if (vma->vm_flags & (VM_WRITE |VM_EXEC | +VM_SHARED |VM_MAYSHARE )) +return -EINVAL ; + + vma->vm_flags &= ~(VM_MAYWRITE |VM_MAYEXEC ); + +/* +* If the privileged parent forks and child drops root +* privilege, we do not want the child to retain access to the +* mapped OA buffer. Explicitly set VM_DONTCOPY to avoid such +* cases. +*/ + vma->vm_flags |=VM_PFNMAP |VM_DONTEXPAND | +VM_DONTDUMP |VM_DONTCOPY ; +break ; + +default : +return -EINVAL ; + } + + vma->vm_page_prot =vm_get_page_prot (vma->vm_flags); + vma->vm_private_data = stream; + vma->vm_ops = &vm_ops_oa; + +return 0 ; +}static const struct file_operations fops = { .owner =THIS_MODULE ,@@ -3440,6 +3559,7 @@ static const struct file_operations fops = {* to handle 32bits compatibility. */ .compat_ioctl = i915_perf_ioctl, + .mmap = i915_perf_mmap, };@@ -4639,8 +4759,12 @@ int i915_perf_ioctl_version(void)* * - OA buffer head/tail/status/buffer registers for read only * - OA counters A18, A19, A20 for read/write +* +* 8: Added an option to map oa buffer at umd driver level and trigger +* oa reports within oa buffer from command buffer. See +* I915_PERF_IOCTL_GET_OA_BUFFER_INFO. */ -return 7 ; +return 8 ; }#if IS_ENABLED (CONFIG_DRM_I915_SELFTEST )include/uapi/drm/i915_drm.h +0
-0include/uapi/drm/i915_drm.h struct drm_i915_perf_open_param { · line 2420
Quoted 4 lines
include/uapi/drm/i915_drm.h +1
-0@@ -2417,6 +2417,39 @@ struct drm_i915_perf_open_param {*/ #define I915_PERF_IOCTL_CONFIG _IO('i', 0x2) +/* Please make this proper kerneldoc. Ideally also fix up all the other perf related uapi and also document it all with kerneldoc.
Quoted 6 lines
Please make sure the result looks good with
$ make htmldocsAlso, this is uapi, therefore your patch needs to include
- link to the igts for this
IGT tests: https://patchwork.freedesktop.org/series/94172/ Patches 1,2
Quoted 1 line
- link to the userspace MR that uses this (I guess it's mesa?)
For now GPUvis is the userspace for all perf OA interfaces.
GPUvis provides the visualization for OA reports. It has 2 parts
1) It uses perf library from IGT. The perf library changes are here:
IGT: https://patchwork.freedesktop.org/series/94172/ Patches 3,4 and 5.
2) GPUvis changes:
https://github.com/unerlige/gpuvis/commit/1c19c134a64564f7b8d7ca3b46449324040a40be
Should I create an MR for GPUvis while this kernel patch and (1) are not yet merged? Please advise.
Thanks,
Umesh
Quoted 33 lines
Cheers, Daniel
Quoted 30 lines
include/uapi/drm/i915_drm.h +30
-0+* Returns OA buffer properties to be used with mmap. +* +* This ioctl is available in perf revision 8. +*/ +#define I915_PERF_IOCTL_GET_OA_BUFFER_INFO _IOWR('i', 0x3, struct drm_i915_perf_oa_buffer_info) + +/* +* OA buffer size and offset. +* +* OA output buffer +* type: 0 +* flags: mbz +* +* After querying the info, pass (size,offset) to mmap(), +* +* mmap(0, info.size, PROT_READ, MAP_PRIVATE, perf_fd, info.offset). +* +* Note that only a private (not shared between processes, or across fork()) +* read-only mmapping is allowed. +* +* HW is continually writing data to the mapped OA buffer and it conforms to +* the OA format as specified by user config. The buffer provides reports that +* have OA counters - A, B and C. +*/ +struct drm_i915_perf_oa_buffer_info { +__u32 type;/* in */ +__u32 flags;/* in */ +__u64 size;/* out */ +__u64 offset;/* out */ +__u64 rsvd;/* mbz */
Quoted 12 lines
Quoted 8 lines
include/uapi/drm/i915_drm.h +2
-1+}; +/* * Common to all i915 perf records */ --2.20.1
Signature · 2 lines
Daniel Vetter Software Engineer, Intel Corporation
GPUvis pro
Quoted 1 line
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BAT: failure for Enable triggered perf query for Xe_HP (rev2)
In reply to Umesh Nerlige Ramappa== Series Details ==
== Series Details ==
Series: Enable triggered perf query for Xe_HP (rev2)
URL : https://patchwork.freedesktop.org/series/93357/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_10538 -> Patchwork_20922
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_20922 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_20922, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_20922:
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live@workarounds:
- fi-bsw-kefka: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10538/fi-bsw-kefka/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-bsw-kefka/igt@i915_selftest@[email protected]
- fi-bsw-nick: [PASS][3] -> [DMESG-FAIL][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10538/fi-bsw-nick/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-bsw-nick/igt@i915_selftest@[email protected]
Known issues
------------
Here are the changes found in Patchwork_20922 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@cs-gfx:
- fi-rkl-guc: NOTRUN -> [SKIP][5] ([fdo#109315]) +17 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-rkl-guc/igt@amdgpu/[email protected]
* igt@i915_selftest@live@gt_heartbeat:
- fi-icl-y: [PASS][6] -> [DMESG-FAIL][7] ([i915#2291] / [i915#541])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10538/fi-icl-y/igt@i915_selftest@live@gt_heartbeat.html
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-icl-y/igt@i915_selftest@live@gt_heartbeat.html
* igt@i915_selftest@live@gt_lrc:
- fi-rkl-guc: NOTRUN -> [DMESG-WARN][8] ([i915#3958])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-rkl-guc/igt@i915_selftest@live@gt_lrc.html
#### Possible fixes ####
* igt@core_hotunplug@unbind-rebind:
- fi-rkl-guc: [DMESG-WARN][9] ([i915#3925]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10538/fi-rkl-guc/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-rkl-guc/igt@[email protected]
* igt@gem_exec_suspend@basic-s3:
- fi-tgl-1115g4: [FAIL][11] ([i915#1888]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10538/fi-tgl-1115g4/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/fi-tgl-1115g4/igt@[email protected]
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
[i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
[i915#3925]: https://gitlab.freedesktop.org/drm/intel/issues/3925
[i915#3958]: https://gitlab.freedesktop.org/drm/intel/issues/3958
[i915#541]: https://gitlab.freedesktop.org/drm/intel/issues/541
Participating hosts (44 -> 35)
------------------------------
Missing (9): fi-kbl-soraka fi-ilk-m540 bat-adls-5 bat-dg1-6 bat-dg1-5 fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus bat-jsl-1
Build changes
-------------
* IGT: IGT_6191 -> IGTPW_6174
* Linux: CI_DRM_10538 -> Patchwork_20922
CI-20190529: 20190529
CI_DRM_10538: 031f5dcf3ec226bcd0d5f700347780d51cddd2eb @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_6174: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6174/index.html
IGT_6191: e9292b533691784f46eeb9bae522ca7a8710c920 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_20922: ba4c9f5e219912607fd084988eb7b3e3ca3ce68b @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
ba4c9f5e2199 drm/i915/perf: Map OA buffer to user space for gen12 performance query 0e1c469625db drm/i915/perf: Whitelist OA counter and buffer registers 316d15c65b1a drm/i915/perf: Whitelist OA report trigger registers 818814290091 drm/i915/perf: Ensure observation logic is not clock gated 11ac7d470d99 drm/i915/gt: Enable dynamic adjustment of RING_NONPRIV 813712375355 drm/i915/gt: Check for conflicting RING_NONPRIV b0e3395c01ae drm/i915/gt: Refactor _wa_add to reuse wa_index and wa_list_grow 200d46fa9ad3 drm/i915/gt: Lock intel_engine_apply_whitelist with uncore->lock
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_20922/index.html