arm: mach-k3: Fixes for j721e/j7200 clock data and drivers
Subsystems (4)
v2 cover arm: mach-k3: Fixes for j721e/j7200 clock data and drivers
Hi,
This is v2 of series with fixes for TI j721e and j7200 platforms data and also some fixes for TI clock drivers that make use of this data.
Updates are to patch 3 to address comments from Lokesh and Suman. Patch 3 now contains a note with contact for issues with autogenerated files, http->https in URLs, and an extra blank line before first header.
As with v1, all fixes are related to PLL post dividers reporting the wrong frequency, and now the new frequencies for below clocks match what registers are actually configured for.
Clock: Old Frequency -> New Frequency
-----------------------------------------postdiv2_16fft_main_0_hsdivout6_clk: 66666667 -> 200000000 postdiv2_16fft_main_1_hsdivout5_clk: 320000000 -> 960000000 postdiv2_16fft_main_1_hsdivout7_clk: 320000000 -> 960000000
Regards,
Dave
[v1] https://patchwork.ozlabs.org/project/uboot/list/?series=257518
Dave Gerlach (2):
arm: mach-k3: Add note to auto-generated files
clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write
Suman Anna (3):
arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
clk: ti: k3: Update driver to account for divider flags
arch/arm/mach-k3/j7200/clk-data.c | 91 ++++++++++++----------- arch/arm/mach-k3/j7200/dev-data.c | 6 +- arch/arm/mach-k3/j721e/clk-data.c | 117 ++++++++++++++++-------------- arch/arm/mach-k3/j721e/dev-data.c | 6 +- drivers/clk/ti/clk-k3-pll.c | 13 +++- drivers/clk/ti/clk-k3.c | 4 +- include/k3-clk.h | 30 ++++---- 7 files changed, 149 insertions(+), 118 deletions(-)
Signature · 1 line
2.28.0
PATCH v2 1/5 arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
From: Suman Anna <[email protected]>
The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2 divisors to generate the final FOUTPOSTDIV clock. These are in sequence with POSTDIV2 following the POSTDIV1 clock. The current J721E clock data has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is opposite of the actual implementation. Fix the data by simply adjusting the register bit-shifts.
The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0 register values, fix these as well.
--- arch/arm/mach-k3/j721e/clk-data.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-k3/j721e/clk-data.c +4 -4
@@ -463,8 +463,8 @@ static const struct clk_data clk_list[] = {CLK_MUX ("wkup_fref_clksel_out0" , wkup_fref_clksel_out0_parents,2 ,0x43008050 ,8 ,1 ,0 ),CLK_MUX ("main_pll_hfosc_sel_out1" , main_pll_hfosc_sel_out1_parents,2 ,0x43008084 ,0 ,1 ,0 ),CLK_PLL_DEFFREQ ("pllfrac2_ssmod_16fft_main_1_foutvcop_clk" ,"main_pll_hfosc_sel_out1" ,0x681000 ,0 ,1920000000 ), -CLK_DIV ("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfrac2_ssmod_16fft_main_1_foutvcop_clk" ,0x680038 ,24 ,3 ,0 ), -CLK_DIV ("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfrac2_ssmod_16fft_main_1_foutvcop_clk" ,0x681038 ,16 ,3 ,0 ), +CLK_DIV ("pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfrac2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x681038 ,24 ,3 ,0 ),CLK_PLL ("pllfrac2_ssmod_16fft_mcu_0_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d00000 ,0 ),CLK_PLL_DEFFREQ ("pllfrac2_ssmod_16fft_mcu_1_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d01000 ,0 ,2400000000 ), CLK_PLL_DEFFREQ("pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
@@ -523,8 +523,8 @@ static const struct clk_data clk_list[] = {CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout3_clk" ,"pllfrac2_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d0208c ,0 ,7 ,0 ),CLK_FIXED_RATE ("j7_wakeup_16ff_wkup_0_wkup_rcosc_32k_clk" ,32000 ,0 ),CLK_PLL ("pllfrac2_ssmod_16fft_main_0_foutvcop_clk" ,"main_pll_hfosc_sel_out0" ,0x680000 ,0 ), -CLK_DIV ("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfrac2_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,24 ,3 ,0 ), -CLK_DIV ("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfrac2_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfrac2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,24 ,3 ,0 ),CLK_PLL ("pllfrac2_ssmod_16fft_main_13_foutvcop_clk" ,"main_pll_hfosc_sel_out13" ,0x68d000 ,0 ),CLK_PLL ("pllfrac2_ssmod_16fft_main_14_foutvcop_clk" ,"main_pll_hfosc_sel_out14" ,0x68e000 ,0 ), CLK_PLL("pllfrac2_ssmod_16fft_main_16_foutvcop_clk", "main_pll_hfosc_sel_out16", 0x690000, 0),
Signature · 1 line
2.28.0
Re: [PATCH v2 1/5] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
Quoted 9 lines · Dave Gerlach
From: Suman Anna <[email protected]>
The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2 divisors to generate the final FOUTPOSTDIV clock. These are in sequence with POSTDIV2 following the POSTDIV1 clock. The current J721E clock data has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is opposite of the actual implementation. Fix the data by simply adjusting the register bit-shifts.
Quoted 6 lines
The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0 register values, fix these as well.
Fixes 277729eaf373 ("arm: mach-k3: Add platform data for j721e and j7200")Signed-off-by Suman Anna <[email protected]>Signed-off-by Dave Gerlach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v2 2/5 arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
In reply to Dave GerlachFrom: Suman Anna <[email protected]>
The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2 divisors to generate the final FOUTPOSTDIV clock. These are in sequence with POSTDIV2 following the POSTDIV1 clock. The current J7200 clock data has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is opposite of the actual implementation. Fix the data by simply adjusting the register bit-shifts.
The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0 register values, fix these as well.
--- arch/arm/mach-k3/j7200/clk-data.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/mach-k3/j7200/clk-data.c +4 -4
@@ -319,8 +319,8 @@ static const struct clk_data clk_list[] = {CLK_MUX ("wkup_fref_clksel_out0" , wkup_fref_clksel_out0_parents,2 ,0x43008050 ,8 ,1 ,0 ),CLK_MUX ("main_pll_hfosc_sel_out1" , main_pll_hfosc_sel_out1_parents,2 ,0x43008084 ,0 ,1 ,0 ),CLK_PLL_DEFFREQ ("pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,"main_pll_hfosc_sel_out1" ,0x681000 ,0 ,1920000000 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x680038 ,24 ,3 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681038 ,16 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x681038 ,24 ,3 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_mcu_0_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d00000 ,0 ),CLK_PLL_DEFFREQ ("pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d01000 ,0 ,2400000000 ), CLK_PLL_DEFFREQ("pllfracf_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
@@ -360,8 +360,8 @@ static const struct clk_data clk_list[] = {CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout2_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02088 ,0 ,7 ,0 ),CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout3_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d0208c ,0 ,7 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,"main_pll_hfosc_sel_out0" ,0x680000 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,24 ,3 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,16 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,24 ,3 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_12_foutvcop_clk" ,"main_pll_hfosc_sel_out12" ,0x68c000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_14_foutvcop_clk" ,"main_pll_hfosc_sel_out14" ,0x68e000 ,0 ), CLK_PLL("pllfracf_ssmod_16fft_main_2_foutvcop_clk", "main_pll_hfosc_sel_out2", 0x682000, 0),
Signature · 1 line
2.28.0
Re: [PATCH v2 2/5] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
Quoted 9 lines · Dave Gerlach
From: Suman Anna <[email protected]>
The TI K3 Fractional PLLs use two programmable POSTDIV1 and POSTDIV2 divisors to generate the final FOUTPOSTDIV clock. These are in sequence with POSTDIV2 following the POSTDIV1 clock. The current J7200 clock data has the POSTDIV2 clock as the parent for the POSTDIV1 clock, which is opposite of the actual implementation. Fix the data by simply adjusting the register bit-shifts.
Quoted 6 lines
The Main PLL1 POSTDIV clocks were also defined incorrectly using Main PLL0 register values, fix these as well.
Fixes 277729eaf373 ("arm: mach-k3: Add platform data for j721e and j7200")Signed-off-by Suman Anna <[email protected]>Signed-off-by Dave Gerlach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v2 3/5 arm: mach-k3: Add note to auto-generated files
In reply to Dave GerlachAdd a note to the automatically generated clk-data and dev-data files for j721e and j7200 to indicate that they are in fact auto-generated and should not be hand edited.
Also adjust TI URL to use https instead of http and also add an empty line before first header inclusion.
--- arch/arm/mach-k3/j7200/clk-data.c | 6 +++++- arch/arm/mach-k3/j7200/dev-data.c | 6 +++++- arch/arm/mach-k3/j721e/clk-data.c | 6 +++++- arch/arm/mach-k3/j721e/dev-data.c | 6 +++++- 4 files changed, 20 insertions(+), 4 deletions(-)
arch/arm/mach-k3/j7200/clk-data.c +5 -1
@@ -2,8 +2,12 @@/* * J7200 specific clock platform data * -* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ +* This file is auto generated. Please do not hand edit and report any issues +* to Dave Gerlach <[email protected]>. +* +* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-clk.h" static const char *const gluelogic_hfosc0_clkout_parents[] = {
arch/arm/mach-k3/j7200/dev-data.c +5 -1
@@ -2,8 +2,12 @@/* * J7200 specific device platform data * -* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ +* This file is auto generated. Please do not hand edit and report any issues +* to Dave Gerlach <[email protected]>. +* +* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-dev.h" static struct ti_psc soc_psc_list[] = {
arch/arm/mach-k3/j721e/clk-data.c +5 -1
@@ -2,8 +2,12 @@/* * J721E specific clock platform data * -* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ +* This file is auto generated. Please do not hand edit and report any issues +* to Dave Gerlach <[email protected]>. +* +* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-clk.h" static const char *const gluelogic_hfosc0_clkout_parents[] = {
arch/arm/mach-k3/j721e/dev-data.c +5 -1
@@ -2,8 +2,12 @@/* * J721E specific device platform data * -* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ +* This file is auto generated. Please do not hand edit and report any issues +* to Dave Gerlach <[email protected]>. +* +* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include "k3-dev.h" static struct ti_psc soc_psc_list[] = {
Signature · 1 line
2.28.0
Re: [PATCH v2 3/5] arm: mach-k3: Add note to auto-generated files
Quoted 8 lines · Dave Gerlach
Add a note to the automatically generated clk-data and dev-data files for j721e and j7200 to indicate that they are in fact auto-generated and should not be hand edited.
Also adjust TI URL to use https instead of http and also add an empty line before first header inclusion.
Signed-off-by Dave Gerlach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v2 4/5 clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write
In reply to Dave GerlachThere are three different divider values in the DIV_CTRL register controlled by the k3-pll driver. Currently the ti_pll_clk_set_rate function writes the entire register when programming plld, even though plld only resides in the lower 6 bits.
Change the plld programming to read-modify-write to only affect the relevant bits for plld and to preserve the other two divider values present in the upper 16 bits, otherwise they will always get set to zero when programming plld.
--- drivers/clk/ti/clk-k3-pll.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/clk/ti/clk-k3-pll.c +11 -2
@@ -2,7 +2,7 @@/* * Texas Instruments K3 SoC PLL clock driver * -* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ * Tero Kristo <[email protected]> */
@@ -122,6 +122,7 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)unsigned long pllm;u32 pllfm =0 ;unsigned long plld; +u32 div_ctrl;u32 rem;int shift;
@@ -175,7 +176,15 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)writel (pllm, pll->reg +PLL_16FFT_FREQ_CTRL0 );writel (pllfm, pll->reg +PLL_16FFT_FREQ_CTRL1 ); -writel (plld, pll->reg +PLL_16FFT_DIV_CTRL ); + +/* +* div_ctrl register contains other divider values, so rmw +* only plld and leave existing values alone +*/ + div_ctrl =readl (pll->reg +PLL_16FFT_DIV_CTRL ); + div_ctrl &= ~PLL_16FFT_DIV_CTRL_REF_DIV_MASK ; + div_ctrl |= plld; +writel (div_ctrl, pll->reg +PLL_16FFT_DIV_CTRL ); ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN ; ctrl |=PLL_16FFT_CTRL_PLL_EN ;
Signature · 1 line
2.28.0
Re: [PATCH v2 4/5] clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write
Quoted 5 lines · Dave Gerlach
There are three different divider values in the
DIV_CTRLregister controlled by the k3-pll driver. Currently theti_pll_clk_set_ratefunction writes the entire register when programming plld, even though plld only resides in the lower 6 bits.
Quoted 7 lines
Change the plld programming to read-modify-write to only affect the relevant bits for plld and to preserve the other two divider values present in the upper 16 bits, otherwise they will always get set to zero when programming plld.
Fixes 0aa2930ca192 ("clk: add support for TI K3 SoC PLL")Signed-off-by Dave Gerlach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v2 5/5 clk: ti: k3: Update driver to account for divider flags
In reply to Dave GerlachFrom: Suman Anna <[email protected]>
The K3 SoCs have some PLL output clocks (POSTDIV clocks) which in turn serve as inputs to other HSDIV output clocks. These clocks use the actual value to compute the divider clock rate, and need to be registered with the CLK_DIVIDER_ONE_BASED flags. The current k3-clk driver and data lacks the infrastructure to pass in divider flags. Update the driver and data to account for these divider flags.
--- arch/arm/mach-k3/j7200/clk-data.c | 85 ++++++++++++----------- arch/arm/mach-k3/j721e/clk-data.c | 111 +++++++++++++++--------------- drivers/clk/ti/clk-k3.c | 4 +- include/k3-clk.h | 30 ++++---- 4 files changed, 118 insertions(+), 112 deletions(-)
arch/arm/mach-k3/j7200/clk-data.c +43 -42
@@ -8,6 +8,7 @@* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <linux/clk-provider.h> #include "k3-clk.h" static const char *const gluelogic_hfosc0_clkout_parents[] = {
@@ -323,18 +324,18 @@ static const struct clk_data clk_list[] = {CLK_MUX ("wkup_fref_clksel_out0" , wkup_fref_clksel_out0_parents,2 ,0x43008050 ,8 ,1 ,0 ),CLK_MUX ("main_pll_hfosc_sel_out1" , main_pll_hfosc_sel_out1_parents,2 ,0x43008084 ,0 ,1 ,0 ),CLK_PLL_DEFFREQ ("pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,"main_pll_hfosc_sel_out1" ,0x681000 ,0 ,1920000000 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681038 ,16 ,3 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x681038 ,24 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681038 ,16 ,3 ,0 ,CLK_DIVIDER_ONE_BASED ), +CLK_DIV ("pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk_subdiv" ,0x681038 ,24 ,3 ,0 ,CLK_DIVIDER_ONE_BASED ),CLK_PLL ("pllfracf_ssmod_16fft_mcu_0_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d00000 ,0 ),CLK_PLL_DEFFREQ ("pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d01000 ,0 ,2400000000 ),CLK_PLL_DEFFREQ ("pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,"wkup_fref_clksel_out0" ,0x40d02000 ,0 ,2000000000 ), -CLK_DIV ("postdiv2_16fft_main_1_hsdivout5_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,0x681094 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv1_16fft_mcu_0_hsdivout0_clk" ,"pllfracf_ssmod_16fft_mcu_0_foutvcop_clk" ,0x40d00080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout3_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d0108c ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout4_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01090 ,0 ,7 ,0 ), -CLK_DIV_DEFFREQ ("hsdiv4_16fft_mcu_2_hsdivout4_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02090 ,0 ,7 ,0 ,166666666 ), +CLK_DIV ("postdiv2_16fft_main_1_hsdivout5_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,0x681094 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv1_16fft_mcu_0_hsdivout0_clk" ,"pllfracf_ssmod_16fft_mcu_0_foutvcop_clk" ,0x40d00080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout3_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d0108c ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout4_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01090 ,0 ,7 ,0 ,0 ), +CLK_DIV_DEFFREQ ("hsdiv4_16fft_mcu_2_hsdivout4_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02090 ,0 ,7 ,0 ,0 ,166666666 ),CLK_MUX_PLLCTRL ("k3_pll_ctrl_wrap_wkup_0_sysclkout_clk" , k3_pll_ctrl_wrap_wkup_0_sysclkout_clk_parents,2 ,0x42010000 ,0 ), -CLK_DIV ("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk" ,"k3_pll_ctrl_wrap_wkup_0_sysclkout_clk" ,0x42010118 ,0 ,5 ,0 ), +CLK_DIV ("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk" ,"k3_pll_ctrl_wrap_wkup_0_sysclkout_clk" ,0x42010118 ,0 ,5 ,0 ,0 ),CLK_MUX ("mcu_ospi_ref_clk_sel_out0" , mcu_ospi_ref_clk_sel_out0_parents,2 ,0x40f08030 ,0 ,1 ,0 ),CLK_MUX ("mcuusart_clk_sel_out0" , mcuusart_clk_sel_out0_parents,2 ,0x40f081c0 ,0 ,1 ,0 ), CLK_MUX("wkup_gpio0_clksel_out0", wkup_gpio0_clksel_out0_parents, 4, 0x43008070, 0, 2, 0),
@@ -355,46 +356,46 @@ static const struct clk_data clk_list[] = {CLK_FIXED_RATE ("board_0_mcu_i2c0_scl_out" ,0 ,0 ),CLK_FIXED_RATE ("board_0_wkup_lf_clkin_out" ,0 ,0 ),CLK_FIXED_RATE ("emmcsd4ss_main_0_emmcsdss_io_clk_o" ,0 ,0 ), -CLK_DIV_DEFFREQ ("hsdiv4_16fft_main_1_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681080 ,0 ,7 ,0 ,192000000 ), -CLK_DIV ("hsdiv4_16fft_main_1_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681088 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout1_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01084 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout2_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01088 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout0_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout1_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02084 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout2_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02088 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout3_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d0208c ,0 ,7 ,0 ), +CLK_DIV_DEFFREQ ("hsdiv4_16fft_main_1_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681080 ,0 ,7 ,0 ,0 ,192000000 ), +CLK_DIV ("hsdiv4_16fft_main_1_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_1_foutvcop_clk" ,0x681088 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout1_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01084 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_1_hsdivout2_clk" ,"pllfracf_ssmod_16fft_mcu_1_foutvcop_clk" ,0x40d01088 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout0_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout1_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02084 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout2_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d02088 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_mcu_2_hsdivout3_clk" ,"pllfracf_ssmod_16fft_mcu_2_foutvcop_clk" ,0x40d0208c ,0 ,7 ,0 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,"main_pll_hfosc_sel_out0" ,0x680000 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,16 ,3 ,0 ), -CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,24 ,3 ,0 ), +CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680038 ,16 ,3 ,0 ,CLK_DIVIDER_ONE_BASED ), +CLK_DIV ("pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk_subdiv" ,0x680038 ,24 ,3 ,0 ,CLK_DIVIDER_ONE_BASED ),CLK_PLL ("pllfracf_ssmod_16fft_main_12_foutvcop_clk" ,"main_pll_hfosc_sel_out12" ,0x68c000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_14_foutvcop_clk" ,"main_pll_hfosc_sel_out14" ,0x68e000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_2_foutvcop_clk" ,"main_pll_hfosc_sel_out2" ,0x682000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,"main_pll_hfosc_sel_out3" ,0x683000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_7_foutvcop_clk" ,"main_pll_hfosc_sel_out7" ,0x687000 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_8_foutvcop_clk" ,"main_pll_hfosc_sel_out8" ,0x688000 ,0 ), -CLK_DIV ("postdiv2_16fft_main_0_hsdivout6_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,0x680098 ,0 ,7 ,0 ), -CLK_DIV ("postdiv2_16fft_main_1_hsdivout7_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,0x68109c ,0 ,7 ,0 ), +CLK_DIV ("postdiv2_16fft_main_0_hsdivout6_clk" ,"pllfracf_ssmod_16fft_main_0_foutpostdiv_clk" ,0x680098 ,0 ,7 ,0 ,0 ), +CLK_DIV ("postdiv2_16fft_main_1_hsdivout7_clk" ,"pllfracf_ssmod_16fft_main_1_foutpostdiv_clk" ,0x68109c ,0 ,7 ,0 ,0 ),CLK_MUX ("wkup_obsclk_mux_out0" , wkup_obsclk_mux_out0_parents,16 ,0x43008000 ,0 ,4 ,0 ),CLK_MUX ("main_pll4_xref_sel_out0" , main_pll4_xref_sel_out0_parents,2 ,0x43008090 ,4 ,1 ,0 ),CLK_MUX ("mcu_clkout_mux_out0" , mcu_clkout_mux_out0_parents,2 ,0x40f08010 ,0 ,1 ,0 ), -CLK_DIV_DEFFREQ ("usart_programmable_clock_divider_out0" ,"hsdiv4_16fft_main_1_hsdivout0_clk" ,0x1081c0 ,0 ,2 ,0 ,48000000 ), -CLK_DIV ("hsdiv0_16fft_main_12_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_12_foutvcop_clk" ,0x68c080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv0_16fft_main_7_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_7_foutvcop_clk" ,0x687080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv0_16fft_main_8_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_8_foutvcop_clk" ,0x688080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv1_16fft_main_14_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_14_foutvcop_clk" ,0x68e080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_0_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_0_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680084 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_0_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680088 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_0_hsdivout3_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x68008c ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_0_hsdivout4_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680090 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_2_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_2_foutvcop_clk" ,0x682080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_2_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_2_foutvcop_clk" ,0x682084 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_3_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_3_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683084 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv4_16fft_main_3_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683088 ,0 ,7 ,0 ), +CLK_DIV_DEFFREQ ("usart_programmable_clock_divider_out0" ,"hsdiv4_16fft_main_1_hsdivout0_clk" ,0x1081c0 ,0 ,2 ,0 ,0 ,48000000 ), +CLK_DIV ("hsdiv0_16fft_main_12_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_12_foutvcop_clk" ,0x68c080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv0_16fft_main_7_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_7_foutvcop_clk" ,0x687080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv0_16fft_main_8_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_8_foutvcop_clk" ,0x688080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv1_16fft_main_14_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_14_foutvcop_clk" ,0x68e080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_0_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_0_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680084 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_0_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680088 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_0_hsdivout3_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x68008c ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_0_hsdivout4_clk" ,"pllfracf_ssmod_16fft_main_0_foutvcop_clk" ,0x680090 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_2_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_2_foutvcop_clk" ,0x682080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_2_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_2_foutvcop_clk" ,0x682084 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_3_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_3_hsdivout1_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683084 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv4_16fft_main_3_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_3_foutvcop_clk" ,0x683088 ,0 ,7 ,0 ,0 ),CLK_MUX_PLLCTRL ("k3_pll_ctrl_wrap_main_0_sysclkout_clk" , k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents,2 ,0x410000 ,0 ), -CLK_DIV ("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk" ,"k3_pll_ctrl_wrap_main_0_sysclkout_clk" ,0x410118 ,0 ,5 ,0 ), -CLK_DIV ("mcu_obsclk_div_out0" ,"wkup_obsclk_mux_out0" ,0x43008000 ,8 ,4 ,0 ), +CLK_DIV ("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk" ,"k3_pll_ctrl_wrap_main_0_sysclkout_clk" ,0x410118 ,0 ,5 ,0 ,0 ), +CLK_DIV ("mcu_obsclk_div_out0" ,"wkup_obsclk_mux_out0" ,0x43008000 ,8 ,4 ,0 ,0 ),CLK_MUX ("mcu_obsclk_outmux_out0" , mcu_obsclk_outmux_out0_parents,2 ,0x43008000 ,24 ,1 ,0 ),CLK_PLL ("pllfracf_ssmod_16fft_main_4_foutvcop_clk" ,"main_pll4_xref_sel_out0" ,0x684000 ,0 ), CLK_MUX("clkout_mux_out0", clkout_mux_out0_parents, 2, 0x108010, 0, 1, 0),
@@ -403,14 +404,14 @@ static const struct clk_data clk_list[] = {CLK_MUX ("gtc_clk_mux_out0" , gtc_clk_mux_out0_parents,16 ,0x108030 ,0 ,4 ,0 ),CLK_MUX ("obsclk1_mux_out0" , obsclk1_mux_out0_parents,4 ,0x108004 ,0 ,2 ,0 ),CLK_MUX ("gpmc_fclk_sel_out0" , gpmc_fclk_sel_out0_parents,4 ,0x1080d0 ,0 ,2 ,0 ), -CLK_DIV ("hsdiv2_16fft_main_4_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_4_foutvcop_clk" ,0x684080 ,0 ,7 ,0 ), -CLK_DIV ("hsdiv2_16fft_main_4_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_4_foutvcop_clk" ,0x684088 ,0 ,7 ,0 ), +CLK_DIV ("hsdiv2_16fft_main_4_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_4_foutvcop_clk" ,0x684080 ,0 ,7 ,0 ,0 ), +CLK_DIV ("hsdiv2_16fft_main_4_hsdivout2_clk" ,"pllfracf_ssmod_16fft_main_4_foutvcop_clk" ,0x684088 ,0 ,7 ,0 ,0 ),CLK_MUX ("audio_refclko_mux_out0" , audio_refclko_mux_out0_parents,32 ,0x1082e0 ,0 ,5 ,0 ),CLK_MUX ("audio_refclko_mux_out1" , audio_refclko_mux_out1_parents,32 ,0x1082e4 ,0 ,5 ,0 ),CLK_MUX ("obsclk0_mux_out0" , obsclk0_mux_out0_parents,32 ,0x108000 ,0 ,5 ,0 ), -CLK_DIV ("osbclk0_div_out0" ,"obsclk0_mux_out0" ,0x108000 ,8 ,8 ,0 ), -CLK_DIV ("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk" ,"k3_pll_ctrl_wrap_main_0_sysclkout_clk" ,0x41011c ,0 ,5 ,0 ), - CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0), +CLK_DIV ("osbclk0_div_out0" ,"obsclk0_mux_out0" ,0x108000 ,8 ,8 ,0 ,0 ), +CLK_DIV ("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk" ,"k3_pll_ctrl_wrap_main_0_sysclkout_clk" ,0x41011c ,0 ,5 ,0 ,0 ), + CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0, 0), }; static const struct dev_clk soc_dev_clk_data[] = {
arch/arm/mach-k3/j721e/clk-data.c +56 -55
158 lines not on this page · raw message
drivers/clk/ti/clk-k3.c +2 -2
@@ -2,7 +2,7 @@/* * Texas Instruments K3 clock driver * -* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +* Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/ * Tero Kristo <[email protected]> */
@@ -112,7 +112,7 @@ static int ti_clk_probe(struct udevice *dev)map_physmem (ti_clk_data->clk.div.reg,0 ,MAP_NOCACHE ), ti_clk_data->clk.div.shift, ti_clk_data->clk.div.width, - 0); + ti_clk_data->clk.div.div_flags);break ;case CLK_TYPE_MUX : name = ti_clk_data->clk.mux.name;
include/k3-clk.h +17 -13
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com +* (C) Copyright 2020-2021 Texas Instruments Incorporated - http://www.ti.com * Tero Kristo <[email protected]> */
@@ -54,6 +54,7 @@ struct div_data {u32 flags;int shift;int width; +u32 div_flags; };struct hfosc_data {
@@ -105,20 +106,23 @@ struct clk_data { .width = _width, .flags = _flags } \ } -#define CLK_DIV (_name, _parent, _reg, _shift, _width, _flags) \ - { \ - .type = CLK_TYPE_DIV, \ - .clk.div = {.name = _name, .parent = _parent, .reg = _reg, .shift = _shift, .width = _width, .flags = _flags } \ +#define CLK_DIV (_name, _parent, _reg, _shift, _width, _flags, _div_flags) \ + { \ + .type = CLK_TYPE_DIV, \ + .clk.div = { \ + .name = _name, .parent = _parent, .reg = _reg, \ + .shift = _shift, .width = _width, \ + .flags = _flags, .div_flags = _div_flags } \ } -#define CLK_DIV_DEFFREQ (_name, _parent, _reg, _shift, _width, _flags, _freq) \ - { \ - .type = CLK_TYPE_DIV, \ - .default_freq = _freq, \ - .clk.div = { \ - .name = _name, .parent = _parent, \ - .reg = _reg, .shift = _shift, \ - .width = _width, .flags = _flags } \ +#define CLK_DIV_DEFFREQ (_name, _parent, _reg, _shift, _width, _flags, _div_flags, _freq) \ + { \ + .type = CLK_TYPE_DIV, \ + .default_freq = _freq, \ + .clk.div = { \ + .name = _name, .parent = _parent, .reg = _reg, \ + .shift = _shift, .width = _width, \ + .flags = _flags, .div_flags = _div_flags } \ }#define CLK_PLL (_name, _parent, _reg, _flags) \
Signature · 1 line
2.28.0
Re: [PATCH v2 5/5] clk: ti: k3: Update driver to account for divider flags
Quoted 11 lines · Dave Gerlach
From: Suman Anna <[email protected]>
The K3 SoCs have some PLL output clocks (POSTDIV clocks) which in turn serve as inputs to other HSDIV output clocks. These clocks use the actual value to compute the divider clock rate, and need to be registered with the
CLK_DIVIDER_ONE_BASEDflags. The current k3-clk driver and data lacks the infrastructure to pass in divider flags. Update the driver and data to account for these divider flags.Signed-off-by Suman Anna <[email protected]>Signed-off-by Dave Gerlach <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom