gpio: 74x164: Add SPI device ID table
PATCH 1/1 gpio: 74x164: Add SPI device ID table
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table.
Fixes 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by Mark Brown <[email protected]>
--- drivers/gpio/gpio-74x164.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/gpio/gpio-74x164.c +8 -0
@@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi)return 0 ; } +static const struct spi_device_id gen_74x164_spi_ids[] = { + { .name ="74h595" }, + { .name ="741vc594" }, + {}, +}; +MODULE_DEVICE_TABLE (spi, gen_74x164_spi_ids); +static const struct of_device_id gen_74x164_dt_ids[] = { { .compatible ="fairchild,74hc595" }, { .compatible ="nxp,74lvc594" },
@@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = { }, .probe = gen_74x164_probe, .remove = gen_74x164_remove, + .id_table = gen_74x164_spi_ids, };module_spi_driver (gen_74x164_driver);
Signature · 1 line
2.20.1
Quoted 7 lines · Mark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table.
Fixes 96c8395e2166 ("spi: Revert modalias changes")Signed-off-by Mark Brown <[email protected]>
Thanks for working on this.
Reviewed-by Linus Walleij <[email protected]>
Yours,
Linus Walleij