Documentation/boards/riscv.rst: fix code blocks
Subsystems (2)
PATCH 1/1 Documentation/boards/riscv.rst: fix code blocks
Signed-off-by Antony Pavlov <[email protected]>
--- Documentation/boards/riscv.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/boards/riscv.rst +2 -2
@@ -168,13 +168,13 @@ Connect to board's UART with your favorite serial communication software (e.g. minicom) and check 'nmon> ' prompt (nmon runs from onchip ROM). Next close your communication software and use ./scripts/nmon-loader -to load barebox image into board's DRAM, e.g. +to load barebox image into board's DRAM, e.g.:: # ./scripts/nmon-loader barebox.erizo.nmon /dev/ttyUSB0 115200 Wait several munutes for 'nmon> ' prompt. -Next, start barebox from DRAM: +Next, start barebox from DRAM:: nmon> g 80000000 Switch to console [cs0]
Signature · 7 lines
2.33.0 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 4 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- Documentation/boards/riscv.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Splipped through the cracks, but better late than never:
Applied, thanks
Sascha
Signature · 9 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox