Skip to contentSkip to conversation

Documentation/boards/riscv.rst: fix code blocks

PATCH Applied Antony Pavlov 2 participants 2 messages Oct 6, 2021 – Nov 22, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Documentation/boards/riscv.rst: fix code blocks

---
 Documentation/boards/riscv.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/boards/riscv.rst +2 -2
index 97f4d1deb7..b7a3a95f0f 100644
@@ -168,13 +168,13 @@ Connect to board's UART with your favorite serial communication software
 (e.g. minicom) and check 'nmon> ' prompt (nmon runs from onchip ROM).
 
 Next close your communication software and use ./scripts/nmon-loader
-to load barebox image into board's DRAM, e.g.
+to load barebox image into board's DRAM, e.g.::
 
   # ./scripts/nmon-loader barebox.erizo.nmon /dev/ttyUSB0 115200
 
 Wait several munutes for 'nmon> ' prompt.
 
-Next, start barebox from DRAM:
+Next, start barebox from DRAM::
 
   nmon> g 80000000
   Switch to console [cs0]
Signature · 7 lines
2.33.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 4 lines · Antony Pavlov
---
 Documentation/boards/riscv.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Splipped through the cracks, but better late than never:

Applied, thanks

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox