Skip to contentSkip to conversation

4.14.255-rc1 review

PATCH In review Greg Kroah-Hartman 4 participants 26 messages Nov 10, 2021 – Nov 12, 2021

Subsystems (3)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.14.255-rc1 review

This is the start of the stable review cycle for the 4.14.255 release. There are 22 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.255-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.255-rc1

Johan Hovold <[email protected]>
rsi: fix control-message timeout

Johan Hovold <[email protected]>
staging: rtl8192u: fix control-message timeouts

Johan Hovold <[email protected]>
staging: r8712u: fix control-message timeout

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix bulk and interrupt message timeouts

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix bulk-buffer overflow

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix transfer-buffer overflows

Johan Hovold <[email protected]>
comedi: ni_usb6501: fix NULL-deref in command paths

Johan Hovold <[email protected]>
comedi: dt9812: fix DMA buffers on stack

Jan Kara <[email protected]>
isofs: Fix out of bound access for corrupted isofs image

Petr Mladek <[email protected]>
printk/console: Allow to disable console output by using console="" or console=null

James Buren <[email protected]>
usb-storage: Add compatibility quirk flags for iODD 2531/2541

Viraj Shah <[email protected]>
usb: musb: Balance list entry in musb_gadget_queue

Geert Uytterhoeven <[email protected]>
usb: gadget: Mark USB_FSL_QE broken on 64-bit

Juergen Gross <[email protected]>
Revert "x86/kvm: fix vcpu-id indexed array sizes"

Ming Lei <[email protected]>
block: introduce multi-page bvec helpers

Mike Marciniszyn <[email protected]>
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

Gustavo A. R. Silva <[email protected]>
IB/qib: Use struct_size() helper

Wang Kefeng <[email protected]>
ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

Arnd Bergmann <[email protected]>
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Kirill A. Shutemov <[email protected]>
mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS

Dan Carpenter <[email protected]>
media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()

Ming Lei <[email protected]>
scsi: core: Put LLD module refcnt after SCSI device is released

-------------

Diffstat:

 Makefile                                    |   4 +-
 arch/arc/include/asm/pgtable.h              |   2 +
 arch/arm/include/asm/pgtable-2level.h       |   2 +
 arch/arm/include/asm/pgtable-3level.h       |   2 +
 arch/mips/include/asm/pgtable-32.h          |   3 +
 arch/powerpc/include/asm/pte-common.h       |   2 +
 arch/x86/include/asm/pgtable-3level_types.h |   1 +
 arch/x86/include/asm/pgtable_64_types.h     |   2 +
 arch/x86/kvm/ioapic.c                       |   2 +-
 arch/x86/kvm/ioapic.h                       |   4 +-
 drivers/amba/bus.c                          |   3 -
 drivers/infiniband/hw/qib/qib_user_sdma.c   |  35 ++++++---
 drivers/media/firewire/firedtv-avc.c        |  14 +++-
 drivers/media/firewire/firedtv-ci.c         |   2 +
 drivers/net/wireless/rsi/rsi_91x_usb.c      |   2 +-
 drivers/scsi/scsi.c                         |   4 +-
 drivers/scsi/scsi_sysfs.c                   |   9 +++
 drivers/staging/comedi/drivers/dt9812.c     | 115 +++++++++++++++++++++-------
 drivers/staging/comedi/drivers/ni_usb6501.c |  10 +++
 drivers/staging/comedi/drivers/vmk80xx.c    |  28 +++----
 drivers/staging/rtl8192u/r8192U_core.c      |  18 ++---
 drivers/staging/rtl8712/usb_ops_linux.c     |   2 +-
 drivers/usb/gadget/udc/Kconfig              |   1 +
 drivers/usb/musb/musb_gadget.c              |   4 +-
 drivers/usb/storage/unusual_devs.h          |  10 +++
 fs/isofs/inode.c                            |   2 +
 include/asm-generic/pgtable.h               |  13 ++++
 include/linux/bvec.h                        |  30 +++++++-
 kernel/printk/printk.c                      |   9 ++-
 mm/zsmalloc.c                               |  13 ++--
 30 files changed, 262 insertions(+), 86 deletions(-)
author maintainer
#1 lore raw

PATCH 1/22 scsi: core: Put LLD module refcnt after SCSI device is released

From: Ming Lei <[email protected]>

commit f2b85040acec9a928b4eb1b57a989324e8e38d3f upstream.

SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler.

Make sure to put LLD module refcnt after SCSI device is released.

Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi.

---
 drivers/scsi/scsi.c       |    4 +++-
 drivers/scsi/scsi_sysfs.c |    9 +++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)
drivers/scsi/scsi.c +3 -1
@@ -575,8 +575,10 @@ EXPORT_SYMBOL(scsi_device_get);
  */
 void scsi_device_put(struct scsi_device *sdev)
 {
-	module_put(sdev->host->hostt->module);
+	struct module *mod = sdev->host->hostt->module;
+
 	put_device(&sdev->sdev_gendev);
+	module_put(mod);
 }
 EXPORT_SYMBOL(scsi_device_put);
 
drivers/scsi/scsi_sysfs.c +9 -0
@@ -430,9 +430,12 @@ static void scsi_device_dev_release_user
 	struct list_head *this, *tmp;
 	struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL;
 	unsigned long flags;
+	struct module *mod;
 
 	sdev = container_of(work, struct scsi_device, ew.work);
 
+	mod = sdev->host->hostt->module;
+
 	scsi_dh_release_device(sdev);
 
 	parent = sdev->sdev_gendev.parent;
@@ -473,11 +476,17 @@ static void scsi_device_dev_release_user
 
 	if (parent)
 		put_device(parent);
+	module_put(mod);
 }
 
 static void scsi_device_dev_release(struct device *dev)
 {
 	struct scsi_device *sdp = to_scsi_device(dev);
+
+	/* Set module pointer as NULL in case of module unloading */
+	if (!try_module_get(sdp->host->hostt->module))
+		sdp->host->hostt->module = NULL;
+
 	execute_in_process_context(scsi_device_dev_release_usercontext,
 				   &sdp->ew);
 }
author maintainer
#2 lore raw

PATCH 2/22 media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 35d2969ea3c7d32aee78066b1f3cf61a0d935a4e upstream.

The bounds checking in avc_ca_pmt() is not strict enough. It should be checking "read_pos + 4" because it's reading 5 bytes. If the "es_info_length" is non-zero then it reads a 6th byte so there needs to be an additional check for that.

I also added checks for the "write_pos". I don't think these are required because "read_pos" and "write_pos" are tied together so checking one ought to be enough. But they make the code easier to understand for me. The check on write_pos is:

	if (write_pos + 4 >= sizeof(c->operand) - 4) {

The first "+ 4" is because we're writing 5 bytes and the last " - 4" is to leave space for the CRC.

The other problem is that "length" can be invalid. It comes from "data_length" in fdtv_ca_pmt().

---
 drivers/media/firewire/firedtv-avc.c |   14 +++++++++++---
 drivers/media/firewire/firedtv-ci.c  |    2 ++
 2 files changed, 13 insertions(+), 3 deletions(-)
drivers/media/firewire/firedtv-avc.c +11 -3
@@ -1169,7 +1169,11 @@ int avc_ca_pmt(struct firedtv *fdtv, cha
 		read_pos += program_info_length;
 		write_pos += program_info_length;
 	}
-	while (read_pos < length) {
+	while (read_pos + 4 < length) {
+		if (write_pos + 4 >= sizeof(c->operand) - 4) {
+			ret = -EINVAL;
+			goto out;
+		}
 		c->operand[write_pos++] = msg[read_pos++];
 		c->operand[write_pos++] = msg[read_pos++];
 		c->operand[write_pos++] = msg[read_pos++];
@@ -1181,13 +1185,17 @@ int avc_ca_pmt(struct firedtv *fdtv, cha
 		c->operand[write_pos++] = es_info_length >> 8;
 		c->operand[write_pos++] = es_info_length & 0xff;
 		if (es_info_length > 0) {
+			if (read_pos >= length) {
+				ret = -EINVAL;
+				goto out;
+			}
 			pmt_cmd_id = msg[read_pos++];
 			if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
 				dev_err(fdtv->device, "invalid pmt_cmd_id %d at stream level\n",
 					pmt_cmd_id);
 
-			if (es_info_length > sizeof(c->operand) - 4 -
-					     write_pos) {
+			if (es_info_length > sizeof(c->operand) - 4 - write_pos ||
+			    es_info_length > length - read_pos) {
 				ret = -EINVAL;
 				goto out;
 			}
drivers/media/firewire/firedtv-ci.c +2 -0
@@ -138,6 +138,8 @@ static int fdtv_ca_pmt(struct firedtv *f
 	} else {
 		data_length = msg->msg[3];
 	}
+	if (data_length > sizeof(msg->msg) - data_pos)
+		return -EINVAL;
 
 	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length);
 }
author maintainer
#3 lore raw

PATCH 3/22 mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS

In reply to Greg Kroah-Hartman

From: "Kirill A. Shutemov" <[email protected]>

commit 02390b87a9459937cdb299e6b34ff33992512ec7 upstream

With boot-time switching between paging mode we will have variable MAX_PHYSMEM_BITS.

Let's use the maximum variable possible for CONFIG_X86_5LEVEL=y configuration to define zsmalloc data structures.

The patch introduces MAX_POSSIBLE_PHYSMEM_BITS to cover such case. It also suits well to handle PAE special case.

---
 arch/x86/include/asm/pgtable-3level_types.h |    1 +
 arch/x86/include/asm/pgtable_64_types.h     |    2 ++
 mm/zsmalloc.c                               |   13 +++++++------
 3 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable-3level_types.h +1 -0
@@ -44,5 +44,6 @@ typedef union {
  */
 #define PTRS_PER_PTE	512
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	36
 
 #endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
arch/x86/include/asm/pgtable_64_types.h +2 -0
@@ -40,6 +40,8 @@ typedef struct { pteval_t pte; } pte_t;
 #define P4D_SIZE	(_AC(1, UL) << P4D_SHIFT)
 #define P4D_MASK	(~(P4D_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	52
+
 #else /* CONFIG_X86_5LEVEL */
 
 /*
mm/zsmalloc.c +7 -6
@@ -83,18 +83,19 @@
  * This is made more complicated by various memory models and PAE.
  */
 
-#ifndef MAX_PHYSMEM_BITS
-#ifdef CONFIG_HIGHMEM64G
-#define MAX_PHYSMEM_BITS 36
-#else /* !CONFIG_HIGHMEM64G */
+#ifndef MAX_POSSIBLE_PHYSMEM_BITS
+#ifdef MAX_PHYSMEM_BITS
+#define MAX_POSSIBLE_PHYSMEM_BITS MAX_PHYSMEM_BITS
+#else
 /*
  * If this definition of MAX_PHYSMEM_BITS is used, OBJ_INDEX_BITS will just
  * be PAGE_SHIFT
  */
-#define MAX_PHYSMEM_BITS BITS_PER_LONG
+#define MAX_POSSIBLE_PHYSMEM_BITS BITS_PER_LONG
 #endif
 #endif
-#define _PFN_BITS		(MAX_PHYSMEM_BITS - PAGE_SHIFT)
+
+#define _PFN_BITS		(MAX_POSSIBLE_PHYSMEM_BITS - PAGE_SHIFT)
 
 /*
  * Memory for allocating for handle keeps object position by
author maintainer
#4 lore raw

PATCH 4/22 arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit cef397038167ac15d085914493d6c86385773709 ]

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

Fixes 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")

[florian: patch arch/powerpc/include/asm/pte-common.h for 4.14.y removed arch/riscv/include/asm/pgtable.h which does not exist]

---
 arch/arc/include/asm/pgtable.h        |    2 ++
 arch/arm/include/asm/pgtable-2level.h |    2 ++
 arch/arm/include/asm/pgtable-3level.h |    2 ++
 arch/mips/include/asm/pgtable-32.h    |    3 +++
 arch/powerpc/include/asm/pte-common.h |    2 ++
 include/asm-generic/pgtable.h         |   13 +++++++++++++
 6 files changed, 24 insertions(+)
arch/arc/include/asm/pgtable.h +2 -0
@@ -138,8 +138,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************
arch/arm/include/asm/pgtable-2level.h +2 -0
@@ -78,6 +78,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
arch/arm/include/asm/pgtable-3level.h +2 -0
@@ -37,6 +37,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */
arch/mips/include/asm/pgtable-32.h +3 -0
@@ -111,6 +111,7 @@ static inline void pmd_clear(pmd_t *pmdp
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t
 pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -126,6 +127,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -140,6 +142,7 @@ static inline pte_t pfn_pte(unsigned lon
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
arch/powerpc/include/asm/pte-common.h +2 -0
@@ -102,8 +102,10 @@ static inline bool pte_user(pte_t pte)
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL<<PTE_RPN_SHIFT)-1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /* _PAGE_CHG_MASK masks of bits that are to be preserved across
include/asm-generic/pgtable.h +13 -0
@@ -1069,6 +1069,19 @@ static inline bool arch_has_pfn_modify_c
 
 #endif /* !__ASSEMBLY__ */
 
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+/*
+ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
+ * with physical address space extension, but falls back to
+ * BITS_PER_LONG otherwise.
+ */
+#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
+#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#endif
+#endif
+
 #ifndef has_transparent_hugepage
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1
author maintainer
#5 lore raw

PATCH 5/22 ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

In reply to Greg Kroah-Hartman

From: Wang Kefeng <[email protected]>

commit eb4f756915875b0ea0757751cd29841f0504d547 upstream.

After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"), no irq case has been removed, irq_of_parse_and_map() will return 0 in all cases when get error from parse and map an interrupt into linux virq space.

amba_device_register() is only used on no-DT initialization, see
s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c
ep93xx_init_devices() arch/arm/mach-ep93xx/core.c

They won't set -1 to irq[0], so no need the warn.

This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3.

---
 drivers/amba/bus.c |    3 ---
 1 file changed, 3 deletions(-)
drivers/amba/bus.c +0 -3
@@ -355,9 +355,6 @@ static int amba_device_try_add(struct am
 	void __iomem *tmp;
 	int i, ret;
 
-	WARN_ON(dev->irq[0] == (unsigned int)-1);
-	WARN_ON(dev->irq[1] == (unsigned int)-1);
-
 	ret = request_resource(parent, &dev->res);
 	if (ret)
 		goto err_out;
author maintainer
#6 lore raw

PATCH 6/22 IB/qib: Use struct_size() helper

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 829ca44ecf60e9b6f83d0161a6ef10c1304c5060 upstream.

Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used.

So, replace the following form:

sizeof(*pkt) + sizeof(pkt->addr[0])*n

with:

struct_size(pkt, addr, n)

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/infiniband/hw/qib/qib_user_sdma.c +4 -2
@@ -41,6 +41,7 @@
 #include <linux/rbtree.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
+#include <linux/overflow.h>
 
 #include "qib.h"
 #include "qib_user_sdma.h"
@@ -908,10 +909,11 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int pktsize, tidsmsize, n;
+			int tidsmsize, n;
+			size_t pktsize;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
-			pktsize = sizeof(*pkt) + sizeof(pkt->addr[0])*n;
+			pktsize = struct_size(pkt, addr, n);
 
 			/*
 			 * Determine if this is tid-sdma or just sdma.
author maintainer
#7 lore raw

PATCH 7/22 IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit d39bf40e55e666b5905fdbd46a0dced030ce87be upstream.

Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |   33 ++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/infiniband/hw/qib/qib_user_sdma.c +23 -10
@@ -607,7 +607,7 @@ done:
 /*
  * How many pages in this iovec element?
  */
-static int qib_user_sdma_num_pages(const struct iovec *iov)
+static size_t qib_user_sdma_num_pages(const struct iovec *iov)
 {
 	const unsigned long addr  = (unsigned long) iov->iov_base;
 	const unsigned long  len  = iov->iov_len;
@@ -663,7 +663,7 @@ static void qib_user_sdma_free_pkt_frag(
 static int qib_user_sdma_pin_pages(const struct qib_devdata *dd,
 				   struct qib_user_sdma_queue *pq,
 				   struct qib_user_sdma_pkt *pkt,
-				   unsigned long addr, int tlen, int npages)
+				   unsigned long addr, int tlen, size_t npages)
 {
 	struct page *pages[8];
 	int i, j;
@@ -727,7 +727,7 @@ static int qib_user_sdma_pin_pkt(const s
 	unsigned long idx;
 
 	for (idx = 0; idx < niov; idx++) {
-		const int npages = qib_user_sdma_num_pages(iov + idx);
+		const size_t npages = qib_user_sdma_num_pages(iov + idx);
 		const unsigned long addr = (unsigned long) iov[idx].iov_base;
 
 		ret = qib_user_sdma_pin_pages(dd, pq, pkt, addr,
@@ -829,8 +829,8 @@ static int qib_user_sdma_queue_pkts(cons
 		unsigned pktnw;
 		unsigned pktnwc;
 		int nfrags = 0;
-		int npages = 0;
-		int bytes_togo = 0;
+		size_t npages = 0;
+		size_t bytes_togo = 0;
 		int tiddma = 0;
 		int cfur;
 
@@ -890,7 +890,11 @@ static int qib_user_sdma_queue_pkts(cons
 
 			npages += qib_user_sdma_num_pages(&iov[idx]);
 
-			bytes_togo += slen;
+			if (check_add_overflow(bytes_togo, slen, &bytes_togo) ||
+			    bytes_togo > type_max(typeof(pkt->bytes_togo))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
 			pktnwc += slen >> 2;
 			idx++;
 			nfrags++;
@@ -909,8 +913,7 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int tidsmsize, n;
-			size_t pktsize;
+			size_t tidsmsize, n, pktsize, sz, addrlimit;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
 			pktsize = struct_size(pkt, addr, n);
@@ -928,14 +931,24 @@ static int qib_user_sdma_queue_pkts(cons
 			else
 				tidsmsize = 0;
 
-			pkt = kmalloc(pktsize+tidsmsize, GFP_KERNEL);
+			if (check_add_overflow(pktsize, tidsmsize, &sz)) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt = kmalloc(sz, GFP_KERNEL);
 			if (!pkt) {
 				ret = -ENOMEM;
 				goto free_pbc;
 			}
 			pkt->largepkt = 1;
 			pkt->frag_size = frag_size;
-			pkt->addrlimit = n + ARRAY_SIZE(pkt->addr);
+			if (check_add_overflow(n, ARRAY_SIZE(pkt->addr),
+					       &addrlimit) ||
+			    addrlimit > type_max(typeof(pkt->addrlimit))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt->addrlimit = addrlimit;
 
 			if (tiddma) {
 				char *tidsm = (char *)pkt + pktsize;
author maintainer
#8 lore raw

PATCH 8/22 block: introduce multi-page bvec helpers

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

commit 3d75ca0adef4280650c6690a0c4702a74a6f3c95 upstream.

This patch introduces helpers of 'mp_bvec_iter_*' for multi-page bvec support.

The introduced helpers treate one bvec as real multi-page segment, which may include more than one pages.

The existed helpers of bvec_iter_* are interfaces for supporting current bvec iterator which is thought as single-page by drivers, fs, dm and etc. These introduced helpers will build single-page bvec in flight, so this way won't break current bio/bvec users, which needn't any change.

Follows some multi-page bvec background:

- bvecs stored in bio->bi_io_vec is always multi-page style

- bvec(struct bio_vec) represents one physically contiguous I/O buffer, now the buffer may include more than one page after multi-page bvec is supported, and all these pages represented by one bvec is physically contiguous. Before multi-page bvec support, at most one page is included in one bvec, we call it single-page bvec.

- .bv_page of the bvec points to the 1st page in the multi-page bvec

- .bv_offset of the bvec is the offset of the buffer in the bvec

The effect on the current drivers/filesystem/dm/bcache/...:

- almost everyone supposes that one bvec only includes one single page, so we keep the sp interface not changed, for example, bio_for_each_segment() still returns single-page bvec

- bio_for_each_segment_all() will return single-page bvec too

- during iterating, iterator variable(struct bvec_iter) is always updated in multi-page bvec style, and bvec_iter_advance() is kept not changed

- returned(copied) single-page bvec is built in flight by bvec helpers from the stored multi-page bvec

---
 include/linux/bvec.h |   30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)
include/linux/bvec.h +27 -3
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <linux/errno.h>
+#include <linux/mm.h>
 
 /*
  * was unsigned short, but we might as well be ready for > 64kB I/O pages
@@ -52,16 +53,39 @@ struct bvec_iter {
  */
 #define __bvec_iter_bvec(bvec, iter)	(&(bvec)[(iter).bi_idx])
 
-#define bvec_iter_page(bvec, iter)				\
+/* multi-page (mp_bvec) helpers */
+#define mp_bvec_iter_page(bvec, iter)				\
 	(__bvec_iter_bvec((bvec), (iter))->bv_page)
 
-#define bvec_iter_len(bvec, iter)				\
+#define mp_bvec_iter_len(bvec, iter)				\
 	min((iter).bi_size,					\
 	    __bvec_iter_bvec((bvec), (iter))->bv_len - (iter).bi_bvec_done)
 
-#define bvec_iter_offset(bvec, iter)				\
+#define mp_bvec_iter_offset(bvec, iter)				\
 	(__bvec_iter_bvec((bvec), (iter))->bv_offset + (iter).bi_bvec_done)
 
+#define mp_bvec_iter_page_idx(bvec, iter)			\
+	(mp_bvec_iter_offset((bvec), (iter)) / PAGE_SIZE)
+
+#define mp_bvec_iter_bvec(bvec, iter)				\
+((struct bio_vec) {						\
+	.bv_page	= mp_bvec_iter_page((bvec), (iter)),	\
+	.bv_len		= mp_bvec_iter_len((bvec), (iter)),	\
+	.bv_offset	= mp_bvec_iter_offset((bvec), (iter)),	\
+})
+
+/* For building single-page bvec in flight */
+ #define bvec_iter_offset(bvec, iter)				\
+	(mp_bvec_iter_offset((bvec), (iter)) % PAGE_SIZE)
+
+#define bvec_iter_len(bvec, iter)				\
+	min_t(unsigned, mp_bvec_iter_len((bvec), (iter)),		\
+	      PAGE_SIZE - bvec_iter_offset((bvec), (iter)))
+
+#define bvec_iter_page(bvec, iter)				\
+	nth_page(mp_bvec_iter_page((bvec), (iter)),		\
+		 mp_bvec_iter_page_idx((bvec), (iter)))
+
 #define bvec_iter_bvec(bvec, iter)				\
 ((struct bio_vec) {						\
 	.bv_page	= bvec_iter_page((bvec), (iter)),	\
author maintainer
#9 lore raw

PATCH 9/22 Revert "x86/kvm: fix vcpu-id indexed array sizes"

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

commit 1e254d0d86a0f2efd4190a89d5204b37c18c6381 upstream.

This reverts commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3.

The commit has the wrong reasoning, as KVM_MAX_VCPU_ID is not defining the maximum allowed vcpu-id as its name suggests, but the number of vcpu-ids. So revert this patch again.

Message-Id: <[email protected]>

---
 arch/x86/kvm/ioapic.c |    2 +-
 arch/x86/kvm/ioapic.h |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
arch/x86/kvm/ioapic.c +1 -1
@@ -96,7 +96,7 @@ static unsigned long ioapic_read_indirec
 static void rtc_irq_eoi_tracking_reset(struct kvm_ioapic *ioapic)
 {
 	ioapic->rtc_status.pending_eoi = 0;
-	bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID + 1);
+	bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID);
 }
 
 static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic);
arch/x86/kvm/ioapic.h +2 -2
@@ -43,13 +43,13 @@ struct kvm_vcpu;
 
 struct dest_map {
 	/* vcpu bitmap where IRQ has been sent */
-	DECLARE_BITMAP(map, KVM_MAX_VCPU_ID + 1);
+	DECLARE_BITMAP(map, KVM_MAX_VCPU_ID);
 
 	/*
 	 * Vector sent to a given vcpu, only valid when
 	 * the vcpu's bit in map is set
 	 */
-	u8 vectors[KVM_MAX_VCPU_ID + 1];
+	u8 vectors[KVM_MAX_VCPU_ID];
 };
 
 
author maintainer
#10 lore raw

PATCH 10/22 usb: gadget: Mark USB_FSL_QE broken on 64-bit

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

commit a0548b26901f082684ad1fb3ba397d2de3a1406a upstream.

On 64-bit:

drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep0_rx’:
drivers/usb/gadget/udc/fsl_qe_udc.c:842:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
842 | vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
| ^
In file included from drivers/usb/gadget/udc/fsl_qe_udc.c:41:
drivers/usb/gadget/udc/fsl_qe_udc.c:843:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
843 | frame_set_data(pframe, (u8 *)vaddr);
| ^

The driver assumes physical and virtual addresses are 32-bit, hence it cannot work on 64-bit platforms.

---
 drivers/usb/gadget/udc/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/gadget/udc/Kconfig +1 -0
@@ -328,6 +328,7 @@ config USB_AMD5536UDC
 config USB_FSL_QE
 	tristate "Freescale QE/CPM USB Device Controller"
 	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
 	   QE/CPM2 USB controller, which support device mode with 4
author maintainer
#11 lore raw

PATCH 11/22 usb: musb: Balance list entry in musb_gadget_queue

In reply to Greg Kroah-Hartman

From: Viraj Shah <[email protected]>

commit 21b5fcdccb32ff09b6b63d4a83c037150665a83f upstream.

musb_gadget_queue() adds the passed request to musb_ep::req_list. If the endpoint is idle and it is the first request then it invokes musb_queue_resume_work(). If the function returns an error then the error is passed to the caller without any clean-up and the request remains enqueued on the list. If the caller enqueues the request again then the list corrupts.

Remove the request from the list on error.

Fixes ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc stable <[email protected]>
---
 drivers/usb/musb/musb_gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/musb/musb_gadget.c +3 -1
@@ -1280,9 +1280,11 @@ static int musb_gadget_queue(struct usb_
 		status = musb_queue_resume_work(musb,
 						musb_ep_restart_resume_work,
 						request);
-		if (status < 0)
+		if (status < 0) {
 			dev_err(musb->controller, "%s resume work: %i\n",
 				__func__, status);
+			list_del(&request->list);
+		}
 	}
 
 unlock:
author maintainer
#12 lore raw

PATCH 12/22 usb-storage: Add compatibility quirk flags for iODD 2531/2541

In reply to Greg Kroah-Hartman

From: James Buren <[email protected]>

commit 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 upstream.

These drive enclosures have firmware bugs that make it impossible to mount a new virtual ISO image after Linux ejects the old one if the device is locked by Linux. Windows bypasses this problem by the fact that they do not lock the device. Add a quirk to disable device locking for these drive enclosures.

---
 drivers/usb/storage/unusual_devs.h |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/usb/storage/unusual_devs.h +10 -0
@@ -426,6 +426,16 @@ UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x
 		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
 /*
+ * Reported by James Buren <[email protected]>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV(  0x04c5, 0x2028, 0x0001, 0x0001,
+		"iODD",
+		"2531/2541",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
+/*
  * Not sure who reported this originally but
  * Pavel Machek <[email protected]> reported that the extra US_FL_SINGLE_LUN
  * flag be added */
author maintainer
#13 lore raw

PATCH 13/22 printk/console: Allow to disable console output by using console="" or console=null

In reply to Greg Kroah-Hartman

From: Petr Mladek <[email protected]>

commit 3cffa06aeef7ece30f6b5ac0ea51f264e8fea4d0 upstream.

The commit 48021f98130880dd74 ("printk: handle blank console arguments passed in.") prevented crash caused by empty console= parameter value.

Unfortunately, this value is widely used on Chromebooks to disable the console output. The above commit caused performance regression because the messages were pushed on slow console even though nobody was watching it.

Use ttynull driver explicitly for console="" and console=null parameters. It has been created for exactly this purpose.

It causes that preferred_console is set. As a result, ttySX and ttyX are not used as a fallback. And only ttynull console gets registered by default.

It still allows to register other consoles either by additional console= parameters or SPCR. It prevents regression because it worked this way even before. Also it is a sane semantic. Preventing output on all consoles should be done another way, for example, by introducing mute_console parameter.

---
 kernel/printk/printk.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
kernel/printk/printk.c +8 -1
@@ -2092,8 +2092,15 @@ static int __init console_setup(char *st
 	char *s, *options, *brl_options = NULL;
 	int idx;
 
-	if (str[0] == 0)
+	/*
+	 * console="" or console=null have been suggested as a way to
+	 * disable console output. Use ttynull that has been created
+	 * for exacly this purpose.
+	 */
+	if (str[0] == 0 || strcmp(str, "null") == 0) {
+		__add_preferred_console("ttynull", 0, NULL, NULL);
 		return 1;
+	}
 
 	if (_braille_console_setup(&str, &brl_options))
 		return 1;
author maintainer
#14 lore raw

PATCH 14/22 isofs: Fix out of bound access for corrupted isofs image

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit e96a1866b40570b5950cda8602c2819189c62a48 upstream.

When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

---
 fs/isofs/inode.c |    2 ++
 1 file changed, 2 insertions(+)
fs/isofs/inode.c +2 -0
@@ -1326,6 +1326,8 @@ static int isofs_read_inode(struct inode
 
 	de = (struct iso_directory_record *) (bh->b_data + offset);
 	de_len = *(unsigned char *) de;
+	if (de_len < sizeof(struct iso_directory_record))
+		goto fail;
 
 	if (offset + de_len > bufsize) {
 		int frag1 = bufsize - offset;
author maintainer
#15 lore raw

PATCH 15/22 comedi: dt9812: fix DMA buffers on stack

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 536de747bc48262225889a533db6650731ab25d3 upstream.

USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail.

Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data.

Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.

Fixes 63274cd7d38a ("Staging: comedi: add usb dt9812 driver")
Cc [email protected] # 2.6.29
---
 drivers/staging/comedi/drivers/dt9812.c |  115 +++++++++++++++++++++++---------
 1 file changed, 86 insertions(+), 29 deletions(-)
drivers/staging/comedi/drivers/dt9812.c +86 -29
@@ -41,6 +41,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 
 #include "../comedi_usb.h"
@@ -246,22 +247,42 @@ static int dt9812_read_info(struct comed
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
+	size_t tbuf_size;
 	int count, ret;
+	void *tbuf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
-	cmd.u.flash_data_info.address =
+	tbuf_size = max(sizeof(*cmd), buf_size);
+
+	tbuf = kzalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	cmd = tbuf;
+
+	cmd->cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
+	cmd->u.flash_data_info.address =
 	    cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset);
-	cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size);
+	cmd->u.flash_data_info.numbytes = cpu_to_le16(buf_size);
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
+
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   tbuf, buf_size, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == buf_size)
+			memcpy(buf, tbuf, buf_size);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(tbuf);
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    buf, buf_size, &count, DT9812_USB_TIMEOUT);
+	return ret;
 }
 
 static int dt9812_read_multiple_registers(struct comedi_device *dev,
@@ -270,22 +291,42 @@ static int dt9812_read_multiple_register
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count, ret;
+	size_t buf_size;
+	void *buf;
+
+	buf_size = max_t(size_t, sizeof(*cmd), reg_count);
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	cmd = buf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.read_multi_info.address[i] = address[i];
+		cmd->u.read_multi_info.address[i] = address[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    value, reg_count, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   buf, reg_count, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == reg_count)
+			memcpy(value, buf, reg_count);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(buf);
+
+	return ret;
 }
 
 static int dt9812_write_multiple_registers(struct comedi_device *dev,
@@ -294,19 +335,27 @@ static int dt9812_write_multiple_registe
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
 
-	cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++) {
-		cmd.u.write_multi_info.write[i].address = address[i];
-		cmd.u.write_multi_info.write[i].value = value[i];
+		cmd->u.write_multi_info.write[i].address = address[i];
+		cmd->u.write_multi_info.write[i].value = value[i];
 	}
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_rmw_multiple_registers(struct comedi_device *dev,
@@ -315,17 +364,25 @@ static int dt9812_rmw_multiple_registers
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
 
-	cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
-	cmd.u.rmw_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
+	cmd->u.rmw_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.rmw_multi_info.rmw[i] = rmw[i];
+		cmd->u.rmw_multi_info.rmw[i] = rmw[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_digital_in(struct comedi_device *dev, u8 *bits)
author maintainer
#16 lore raw

PATCH 16/22 comedi: ni_usb6501: fix NULL-deref in command paths

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream.

The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing).

Add the missing sanity checks to probe().

Fixes a03bb00e50ab ("staging: comedi: add NI USB-6501 support")
Cc Luca Ellero <[email protected]>
---
 drivers/staging/comedi/drivers/ni_usb6501.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/staging/comedi/drivers/ni_usb6501.c +10 -0
@@ -153,6 +153,10 @@ static const u8 READ_COUNTER_RESPONSE[]
 					   0x00, 0x00, 0x00, 0x02,
 					   0x00, 0x00, 0x00, 0x00};
 
+/* Largest supported packets */
+static const size_t TX_MAX_SIZE	= sizeof(SET_PORT_DIR_REQUEST);
+static const size_t RX_MAX_SIZE	= sizeof(READ_PORT_RESPONSE);
+
 enum commands {
 	READ_PORT,
 	WRITE_PORT,
@@ -510,6 +514,12 @@ static int ni6501_find_endpoints(struct
 	if (!devpriv->ep_rx || !devpriv->ep_tx)
 		return -ENODEV;
 
+	if (usb_endpoint_maxp(devpriv->ep_rx) < RX_MAX_SIZE)
+		return -ENODEV;
+
+	if (usb_endpoint_maxp(devpriv->ep_tx) < TX_MAX_SIZE)
+		return -ENODEV;
+
 	return 0;
 }
 
author maintainer
#17 lore raw

PATCH 17/22 comedi: vmk80xx: fix transfer-buffer overflows

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream.

The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +4 -2
@@ -99,6 +99,8 @@ enum {
 #define IC3_VERSION		BIT(0)
 #define IC6_VERSION		BIT(1)
 
+#define MIN_BUF_SIZE		64
+
 enum vmk80xx_model {
 	VMK8055_MODEL,
 	VMK8061_MODEL
@@ -687,12 +689,12 @@ static int vmk80xx_alloc_usb_buffers(str
 	struct vmk80xx_private *devpriv = dev->private;
 	size_t size;
 
-	size = usb_endpoint_maxp(devpriv->ep_rx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
author maintainer
#18 lore raw

PATCH 18/22 comedi: vmk80xx: fix bulk-buffer overflow

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream.

The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +7 -9
@@ -168,22 +168,20 @@ static void vmk80xx_do_bulk_msg(struct c
 	__u8 rx_addr;
 	unsigned int tx_pipe;
 	unsigned int rx_pipe;
-	size_t size;
+	size_t tx_size;
+	size_t rx_size;
 
 	tx_addr = devpriv->ep_tx->bEndpointAddress;
 	rx_addr = devpriv->ep_rx->bEndpointAddress;
 	tx_pipe = usb_sndbulkpipe(usb, tx_addr);
 	rx_pipe = usb_rcvbulkpipe(usb, rx_addr);
-
-	/*
-	 * The max packet size attributes of the K8061
-	 * input/output endpoints are identical
-	 */
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
+	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
 	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     size, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, size, NULL, HZ * 10);
+		     tx_size, NULL, devpriv->ep_tx->bInterval);
+
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
author maintainer
#19 lore raw

PATCH 19/22 comedi: vmk80xx: fix bulk and interrupt message timeouts

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream.

USB bulk and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint bInterval value, which should be ignored for bulk endpoints and is typically set to zero. This meant that a failing bulk-out transfer would never time out.

Assume that the 10 second timeout used for all other transfers is more than enough also for the bulk-out endpoint.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +7 -5
@@ -100,6 +100,7 @@ enum {
 #define IC6_VERSION		BIT(1)
 
 #define MIN_BUF_SIZE		64
+#define PACKET_TIMEOUT		10000	/* ms */
 
 enum vmk80xx_model {
 	VMK8055_MODEL,
@@ -178,10 +179,11 @@ static void vmk80xx_do_bulk_msg(struct c
 	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
 	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
-	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
 
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -200,7 +202,7 @@ static int vmk80xx_read_packet(struct co
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -221,7 +223,7 @@ static int vmk80xx_write_packet(struct c
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_reset_device(struct comedi_device *dev)
author maintainer
#20 lore raw

PATCH 20/22 staging: r8712u: fix control-message timeout

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit ce4940525f36ffdcf4fa623bcedab9c2a6db893a upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Fixes 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc [email protected] # 2.6.37
---
 drivers/staging/rtl8712/usb_ops_linux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8712/usb_ops_linux.c +1 -1
@@ -505,7 +505,7 @@ int r8712_usbctrl_vendorreq(struct intf_
 		memcpy(pIo_buf, pdata, len);
 	}
 	status = usb_control_msg(udev, pipe, request, reqtype, value, index,
-				 pIo_buf, len, HZ / 2);
+				 pIo_buf, len, 500);
 	if (status > 0) {  /* Success this control transfer. */
 		if (requesttype == 0x01) {
 			/* For Control read transfer, we have to copy the read
author maintainer
#21 lore raw

PATCH 21/22 staging: rtl8192u: fix control-message timeouts

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Fixes 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Cc [email protected] # 2.6.33
---
 drivers/staging/rtl8192u/r8192U_core.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8192u/r8192U_core.c +9 -9
@@ -266,7 +266,7 @@ int write_nic_byte_E(struct net_device *
 
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -288,7 +288,7 @@ int read_nic_byte_E(struct net_device *d
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -316,7 +316,7 @@ int write_nic_byte(struct net_device *de
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -343,7 +343,7 @@ int write_nic_word(struct net_device *de
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -370,7 +370,7 @@ int write_nic_dword(struct net_device *d
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	kfree(usbdata);
 
 
@@ -397,7 +397,7 @@ int read_nic_byte(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -424,7 +424,7 @@ int read_nic_word(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -448,7 +448,7 @@ static int read_nic_word_E(struct net_de
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 2, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -474,7 +474,7 @@ int read_nic_dword(struct net_device *de
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
author maintainer
#22 lore raw

PATCH 22/22 rsi: fix control-message timeout

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second timeout.

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/rsi/rsi_91x_usb.c +1 -1
@@ -48,7 +48,7 @@ static int rsi_usb_card_write(struct rsi
 			      (void *)seg,
 			      (int)len,
 			      &transfer,
-			      HZ * 5);
+			      USB_CTRL_SET_TIMEOUT);
 
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
Tested-by Linux Kernel Functional Testing on the v1 series
#23 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.255 release. There are 22 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.255-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.14.255-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.14.y
* git commit: 0e0c342dbc368325d81b6ae17b54f1e668fa7447
* git describe: v4.14.254-23-g0e0c342dbc36
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.254-23-g0e0c342dbc36

## No regressions (compared to v4.14.254-8-g158dfc742cc7)

## Fixes (compared to v4.14.254-8-g158dfc742cc7)
No fixes found.

## Test result summary
total: 79228, pass: 63222, fail: 787, skip: 13230, xfail: 1989

## Build Summary
* arm: 130 total, 108 passed, 22 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 19 total, 19 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#24 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.255 release. There are 22 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

Build results:

	total: 168 pass: 168 fail: 0
Qemu test results:
	total: 423 pass: 423 fail: 0

Guenter

maintainer Tested-by on the v1 series
#25 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.255 release. There are 22 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.255-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.255-rc1-g0e0c342dbc36
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon