clk: tegra: Make vde a child of pll_p on tegra114
Subsystems (3)
PATCH 1/1 clk: tegra: Make vde a child of pll_p on tegra114
The current default is to leave the VDE clock's parent at the default, which is clk_m. However, that is not a configuration that will allow the VDE to function. Reparent it to pll_p instead to make sure the hardware can actually decode video content.
Signed-off-by Dmitry Osipenko <[email protected]>
--- drivers/clk/tegra/clk-tegra114.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/tegra/clk-tegra114.c +1 -1
@@ -1158,7 +1158,7 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0 }, { TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0 }, { TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0 }, - { TEGRA114_CLK_VDE, TEGRA114_CLK_CLK_MAX, 600000000, 0 }, + { TEGRA114_CLK_VDE, TEGRA114_CLK_PLL_P, 408000000, 0 }, { TEGRA114_CLK_SPDIF_IN_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 }, { TEGRA114_CLK_I2S0_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 }, { TEGRA114_CLK_I2S1_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
Signature · 1 line
2.33.1