Skip to contentSkip to conversation

clk: tegra: Make vde a child of pll_p on tegra114

PATCH New Dmitry Osipenko 1 participant 1 message Nov 14, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clk: tegra: Make vde a child of pll_p on tegra114

The current default is to leave the VDE clock's parent at the default, which is clk_m. However, that is not a configuration that will allow the VDE to function. Reparent it to pll_p instead to make sure the hardware can actually decode video content.

---
 drivers/clk/tegra/clk-tegra114.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/tegra/clk-tegra114.c +1 -1
index bc9e47a4cb60..ef718c4b3826 100644
@@ -1158,7 +1158,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0 },
 	{ TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0 },
 	{ TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0 },
-	{ TEGRA114_CLK_VDE, TEGRA114_CLK_CLK_MAX, 600000000, 0 },
+	{ TEGRA114_CLK_VDE, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_SPDIF_IN_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA114_CLK_I2S0_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA114_CLK_I2S1_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
Signature · 1 line
2.33.1