NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)
Subsystems (4)
v4 cover NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)
In this patchset you will find:
- New device-trees of ASUS Transformer and Pegatron Chagall tablets.
- New device-tree of Nyan Big Chromebook variant that has 1080p display panel.
- Enabled video decoder on Tegra114.
- Minor cleanup of Nexus7 device-tree.
- Renamed clocks and regulator nodes. I'm sending this patch second time because previously there was no good reason given about why not to apply it. Please apply it this time.
- Fixes for T124 device-tress.
Changelog:
v4: - Factored out common parts of ASUS device-trees into separate patches.
I retained the original author of the tegra30-asus-transformer-common.dtsi after chatting with Svyatoslav. Initially I wanted to change the authorship to Michał, but not that much left from the original DT that was created by Michał, so it's fair to keep Svyatoslav the author. I explained in the commit message that the common DT was derived from the Michał's TF300T DT and then reworked heavily, I also added Michał as co-developer of the common part.
- Added new T124 patches that were requested by Thomas Graichen. They restore USB, CPUFreq and fix overheating of Nyan Chromebooks.
- Added patches that update tegra_defconfig and multi_v7_defconfig with enabled drivers used by ASUS Transformers and Nyan Chromebooks.
- Added acks that were given by Rob Herring to v3.
- Changed display panel compatible of ASUS TF701T like it was suggested by Rob Herring in other thread.
- Removed yet unused SDMMC1 pinmux from TF701T DT as was requested by Anton Bambura.
- Added patch which adds node labels to T30 DTSI. It eases porting devices to upstream. This was requested by Michał Mirosław.
v3: - Maxim added couple "FIXME" comments to Transformer device-trees for
things that are yet missing on kernel side, and thus, can't be enabled in the DT for now.
- Maxim also found that v2 had a small problem in the patch which adds device-tree for Chagall tablet. Turned out I made a mistake during rebase of the patches and haven't noticed it, it's fixed now.
v2: - Svyatoslav and Maxim made couple corrections to regulators, comments
and default brightness of the device-trees.
- Added thermtrip node to transformers DT as we now have PMIC fix for it [1], it works properly now.
[1] https://patchwork.ozlabs.org/project/linux-tegra/patch/[email protected]/
- Changed sound card model names to make them per-device and consistent with the names that other Tegra DTs already use in upstream. This will prevent potential ABI breakages in the future if we will find that sound of some device needs extra differentiation.
Anton Bambura (3):
ARM: tegra: Add labels to tegra114.dtsi
ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T
ARM: tegra: Enable video decoder on Tegra114
David Heidelberg (3):
dt-bindings: ARM: tegra: Document Pegatron Chagall
ARM: tegra: Name clock and regulator nodes according to DT-schema
ARM: tegra: nexus7: Drop clock-frequency from NFC node
Dmitry Osipenko (6):
ARM: tegra: Add device-tree for 1080p version of Nyan Big
ARM: tegra: Enable HDMI CEC on Nyan
ARM: tegra: Enable CPU DFLL on Nyan
ARM: tegra: Add CPU thermal zones to Nyan device-tree
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and
ASUS tablets
ARM: config: multi v7: Enable display drivers used by Tegra devices
Maxim Schwalm (2):
ARM: tegra: Add common device-tree for display panel of ASUS devices
ARM: tegra: nexus7: Use common LVDS display device-tree
Michał Mirosław (2):
ARM: tegra: Add labels to tegra30.dtsi
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
Nikola Milosavljevic (1):
ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
Stefan Eichenberger (1):
ARM: tegra: Add usb-role-switch property to USB OTG ports
Svyatoslav Ryhel (6):
dt-bindings: ARM: tegra: Document ASUS Transformers
ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers
ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
ARM: tegra: Add device-tree for Pegatron Chagall tablet
.../devicetree/bindings/arm/tegra.yaml | 19 + arch/arm/boot/dts/Makefile | 10 +- arch/arm/boot/dts/tegra114-asus-tf701t.dts | 802 +++++ arch/arm/boot/dts/tegra114-dalmore.dts | 16 +- arch/arm/boot/dts/tegra114-roth.dts | 14 +- arch/arm/boot/dts/tegra114-tn7.dts | 8 +- arch/arm/boot/dts/tegra114.dtsi | 90 +- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 1 + arch/arm/boot/dts/tegra124-apalis.dtsi | 1 + arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 +- arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 11 + arch/arm/boot/dts/tegra124-nyan.dtsi | 84 +- arch/arm/boot/dts/tegra124-venice2.dts | 30 +- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 +- arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 +++++++ arch/arm/boot/dts/tegra20-harmony.dts | 16 +- arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +- arch/arm/boot/dts/tegra20-paz00.dts | 6 +- arch/arm/boot/dts/tegra20-plutux.dts | 8 +- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +- arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +- arch/arm/boot/dts/tegra20-tec.dts | 8 +- arch/arm/boot/dts/tegra20-trimslice.dts | 12 +- arch/arm/boot/dts/tegra20-ventana.dts | 12 +- .../boot/dts/tegra30-asus-lvds-display.dtsi | 61 + .../tegra30-asus-nexus7-grouper-common.dtsi | 64 +- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- .../boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - .../boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 - arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++ arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 ++++++ arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 +++++++ arch/arm/boot/dts/tegra30-asus-tf700t.dts | 818 +++++ .../dts/tegra30-asus-transformer-common.dtsi | 1728 ++++++++++ arch/arm/boot/dts/tegra30-beaver.dts | 20 +- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 +- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2794 +++++++++++++++++ arch/arm/boot/dts/tegra30.dtsi | 36 +- arch/arm/configs/multi_v7_defconfig | 5 + arch/arm/configs/tegra_defconfig | 6 + 43 files changed, 10467 insertions(+), 258 deletions(-) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
Signature · 1 line
2.33.1
PATCH v4 1/24 dt-bindings: ARM: tegra: Document ASUS Transformers
From: Svyatoslav Ryhel <[email protected]>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices. This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG Infinity TF700T, TF701T.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +16 -0
@@ -36,6 +36,9 @@ properties: - toradex,colibri_t20-iris - const: toradex,colibri_t20 - const: nvidia,tegra20 + - items: + - const: asus,tf101 + - const: nvidia,tegra20 - items: - const: acer,picasso - const: nvidia,tegra20
@@ -49,6 +52,18 @@ properties: - nvidia,cardhu-a04 - const: nvidia,cardhu - const: nvidia,tegra30 + - items: + - const: asus,tf201 + - const: nvidia,tegra30 + - items: + - const: asus,tf300t + - const: nvidia,tegra30 + - items: + - const: asus,tf300tg + - const: nvidia,tegra30 + - items: + - const: asus,tf700t + - const: nvidia,tegra30 - items: - const: toradex,apalis_t30-eval - const: toradex,apalis_t30
@@ -76,6 +91,7 @@ properties: - const: nvidia,tegra30 - items: - enum: + - asus,tf701t - nvidia,dalmore - nvidia,roth - nvidia,tn7
Signature · 1 line
2.33.1
PATCH v4 2/24 dt-bindings: ARM: tegra: Document Pegatron Chagall
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Document Pegatron Chagall, which is Tegra30-based tablet device.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +3 -0
@@ -89,6 +89,9 @@ properties: - items: - const: ouya,ouya - const: nvidia,tegra30 + - items: + - const: pegatron,chagall + - const: nvidia,tegra30 - items: - enum: - asus,tf701t
Signature · 1 line
2.33.1
PATCH v4 3/24 ARM: tegra: Add labels to tegra30.dtsi
In reply to Dmitry OsipenkoFrom: Michał Mirosław <[email protected]>
Add phandle names for memory/I2C/SPI/USB/SDMMC controller nodes to allow for cleaner device descriptions.
--- arch/arm/boot/dts/tegra30.dtsi | 36 +++++++++++++++++----------------- 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/tegra30.dtsi +18 -18
@@ -585,7 +585,7 @@ rtc@7000e000 { clocks = <&tegra_car TEGRA30_CLK_RTC>; }; - i2c@7000c000 { + i2c1: i2c@7000c000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -601,7 +601,7 @@ i2c@7000c000 { status = "disabled"; }; - i2c@7000c400 { + i2c2: i2c@7000c400 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +617,7 @@ i2c@7000c400 { status = "disabled"; }; - i2c@7000c500 { + i2c3: i2c@7000c500 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -633,7 +633,7 @@ i2c@7000c500 { status = "disabled"; }; - i2c@7000c700 { + i2c4: i2c@7000c700 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c700 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -649,7 +649,7 @@ i2c@7000c700 { status = "disabled"; }; - i2c@7000d000 { + i2c5: i2c@7000d000 { compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000d000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -665,7 +665,7 @@ i2c@7000d000 { status = "disabled"; }; - spi@7000d400 { + spi1: spi@7000d400 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ spi@7000d400 { status = "disabled"; }; - spi@7000d600 { + spi2: spi@7000d600 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -693,7 +693,7 @@ spi@7000d600 { status = "disabled"; }; - spi@7000d800 { + spi3: spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d800 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -707,7 +707,7 @@ spi@7000d800 { status = "disabled"; }; - spi@7000da00 { + spi4: spi@7000da00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -721,7 +721,7 @@ spi@7000da00 { status = "disabled"; }; - spi@7000dc00 { + spi5: spi@7000dc00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000dc00 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -735,7 +735,7 @@ spi@7000dc00 { status = "disabled"; }; - spi@7000de00 { + spi6: spi@7000de00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000de00 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -913,7 +913,7 @@ tegra_i2s4: i2s@70080700 { }; }; - mmc@78000000 { + sdmmc1: mmc@78000000 { compatible = "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -924,7 +924,7 @@ mmc@78000000 { status = "disabled"; }; - mmc@78000200 { + sdmmc2: mmc@78000200 { compatible = "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -935,7 +935,7 @@ mmc@78000200 { status = "disabled"; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { compatible = "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -946,7 +946,7 @@ mmc@78000400 { status = "disabled"; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { compatible = "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -957,7 +957,7 @@ mmc@78000600 { status = "disabled"; }; - usb@7d000000 { + usb1: usb@7d000000 { compatible = "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -999,7 +999,7 @@ phy1: usb-phy@7d000000 { status = "disabled"; }; - usb@7d004000 { + usb2: usb@7d004000 { compatible = "nvidia,tegra30-ehci"; reg = <0x7d004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -1039,7 +1039,7 @@ phy2: usb-phy@7d004000 { status = "disabled"; }; - usb@7d008000 { + usb3: usb@7d008000 { compatible = "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.33.1
PATCH v4 4/24 ARM: tegra: Add labels to tegra114.dtsi
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.
--- arch/arm/boot/dts/tegra114.dtsi | 52 ++++++++++++++++----------------- 1 file changed, 26 insertions(+), 26 deletions(-)
arch/arm/boot/dts/tegra114.dtsi +26 -26
@@ -93,7 +93,7 @@ rgb { }; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra114-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -105,7 +105,7 @@ hdmi@54280000 { status = "disabled"; }; - dsi@54300000 { + dsia: dsi@54300000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +121,7 @@ dsi@54300000 { #size-cells = <0>; }; - dsi@54400000 { + dsib: dsi@54400000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54400000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -335,7 +335,7 @@ pwm: pwm@7000a000 { status = "disabled"; }; - i2c@7000c000 { + i2c1: i2c@7000c000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +350,7 @@ i2c@7000c000 { status = "disabled"; }; - i2c@7000c400 { + i2c2: i2c@7000c400 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,7 +365,7 @@ i2c@7000c400 { status = "disabled"; }; - i2c@7000c500 { + i2c3: i2c@7000c500 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -380,7 +380,7 @@ i2c@7000c500 { status = "disabled"; }; - i2c@7000c700 { + i2c4: i2c@7000c700 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c700 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -395,7 +395,7 @@ i2c@7000c700 { status = "disabled"; }; - i2c@7000d000 { + i2c5: i2c@7000d000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000d000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@ i2c@7000d000 { status = "disabled"; }; - spi@7000d400 { + spi1: spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +425,7 @@ spi@7000d400 { status = "disabled"; }; - spi@7000d600 { + spi2: spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -440,7 +440,7 @@ spi@7000d600 { status = "disabled"; }; - spi@7000d800 { + spi3: spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@ spi@7000d800 { status = "disabled"; }; - spi@7000da00 { + spi4: spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -470,7 +470,7 @@ spi@7000da00 { status = "disabled"; }; - spi@7000dc00 { + spi5: spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,7 +485,7 @@ spi@7000dc00 { status = "disabled"; }; - spi@7000de00 { + spi6: spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,14 +500,14 @@ spi@7000de00 { status = "disabled"; }; - rtc@7000e000 { + tegra_rtc: rtc@7000e000 { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA114_CLK_RTC>; }; - kbc@7000e200 { + tegra_kbc: kbc@7000e200 { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +646,7 @@ mipi: mipi@700e3000 { #nvidia,mipi-calibrate-cells = <1>; }; - mmc@78000000 { + sdmmc1: mmc@78000000 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000000 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,7 +657,7 @@ mmc@78000000 { status = "disabled"; }; - mmc@78000200 { + sdmmc2: mmc@78000200 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000200 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,7 +668,7 @@ mmc@78000200 { status = "disabled"; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000400 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ mmc@78000400 { status = "disabled"; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000600 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -690,7 +690,7 @@ mmc@78000600 { status = "disabled"; }; - usb@7d000000 { + usb1: usb@7d000000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,11 +698,11 @@ usb@7d000000 { clocks = <&tegra_car TEGRA114_CLK_USBD>; resets = <&tegra_car 22>; reset-names = "usb"; - nvidia,phy = <&phy1>; + nvidia,phy = <&usb1_phy>; status = "disabled"; }; - phy1: usb-phy@7d000000 { + usb1_phy: usb-phy@7d000000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>;
@@ -730,7 +730,7 @@ phy1: usb-phy@7d000000 { status = "disabled"; }; - usb@7d008000 { + usb3: usb@7d008000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -738,11 +738,11 @@ usb@7d008000 { clocks = <&tegra_car TEGRA114_CLK_USB3>; resets = <&tegra_car 59>; reset-names = "usb"; - nvidia,phy = <&phy3>; + nvidia,phy = <&usb3_phy>; status = "disabled"; }; - phy3: usb-phy@7d008000 { + usb3_phy: usb-phy@7d008000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>;
Signature · 1 line
2.33.1
PATCH v4 5/24 ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
In reply to Dmitry OsipenkoFrom: Nikola Milosavljevic <[email protected]>
Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 ++++++++++++++++++++++ 2 files changed, 1192 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ + tegra20-asus-tf101.dtb \ tegra20-harmony.dtb \ tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +1191 -0
1,191 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 6/24 ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out from the device-tree of ASUS TF300T tablet that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria and et al.
--- .../dts/tegra30-asus-transformer-common.dtsi | 1728 +++++++++++++++++ 1 file changed, 1728 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1728 -0
@@ -0,0 +1,1728 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + chassis-type = "convertible"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc1; /* uSD slot */ + mmc2 = &sdmmc3; /* WiFi */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + display0 = &lcd; + display1 = &hdmi; + + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + + ramoops@beb00000 { + compatible = "ramoops"; + reg = <0xbeb00000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + trustzone@bfe00000 { + reg = <0xbfe00000 0x200000>; /* 2MB */ + no-map; + }; + }; + + host1x@50000000 { + hdmi: hdmi@54280000 { + status = "okay"; + + hdmi-supply = <&hdmi_5v0_sys>; + pll-supply = <&vdd_1v8_vio>; + vdd-supply = <&vdd_3v3_sys>; + + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + }; + }; + + gpio@6000d000 { + init-lpm-in-hog { + gpio-hog; + gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>, + <TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + input; + }; + + init-lpm-out-hog { + gpio-hog; + gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>, + <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + output-low; + }; + + usb-charge-limit-hog { + gpio-hog; + gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + output-high; + }; + }; + + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* SDMMC1 pinmux */ + sdmmc1_clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd { + nvidia,pins = "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cd { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SDMMC2 pinmux */ + vi_d1_pd5 { + nvidia,pins = "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d5_pl3", + "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_d8_pl6 { + nvidia,pins = "vi_d8_pl6", + "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + nvidia,ioreset = <0>; + }; + + /* SDMMC3 pinmux */ + sdmmc3_clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SDMMC4 pinmux */ + sdmmc4_clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_rst_n { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + cam_mclk { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + drive_sdmmc4 { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + }; + + /* I2C pinmux */ + gen1_i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + gen2_i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + cam_i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + ddc_i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + pwr_i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + hotplug_i2c { + nvidia,pins = "pu4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* HDMI pinmux */ + hdmi_cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + }; + hdmi_hpd { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UART-A */ + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UART-B */ + uartb_txd_rts { + nvidia,pins = "uart2_txd_pc2", + "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uartb_rxd_cts { + nvidia,pins = "uart2_rxd_pc3", + "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UART-C */ + uartc_rxd_cts { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uartc_txd_rts { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* UART-D */ + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* I2S pinmux */ + dap_i2s0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_i2s1 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout { + nvidia,pins = "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_i2s3 { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Sensors pinmux */ + nct_irq { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Asus EC pinmux */ + ec_irqs { + nvidia,pins = "kb_row10_ps2", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ec_reqs { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Memory type bootstrap */ + mem_boostraps { + nvidia,pins = "gmi_ad4_pg4", + "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PCI-e pinmux */ + pex_l2_rst_n { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l0_rst_n_pdd1", + "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l2_clkreq_n { + nvidia,pins = "pex_l2_clkreq_n_pcc7", + "pex_l0_prsnt_n_pdd0", + "pex_l0_clkreq_n_pdd2", + "pex_wake_n_pdd3", + "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SPI pinmux */ + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4", + "spi1_sck_px5", + "spi1_cs0_n_px6", + "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spi2_sck_px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a18_pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Display A pinmux */ + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pclk_pb3", + "lcd_pwr1_pc1", + "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_vsync_pj4", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_dc0_pn6", + "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_cs0_n_pn4 { + nvidia,pins = "lcd_cs0_n_pn4", + "lcd_sdout_pn5", + "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + blink { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* KBC keys */ + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_row1_pr1", + "kb_row3_pr3", + "kb_row8_ps0", + "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4", + "kb_col5_pq5", + "kb_col7_pq7", + "kb_row2_pr2", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row12_ps4", + "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs0_n_pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vi_pclk_pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + nvidia,ioreset = <0>; + }; + + /* GPIO keys pinmux */ + power_key { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + vol_keys { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Bluetooth */ + bt_shutdown { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + bt_dev_wake { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + bt_host_wake { + nvidia,pins = "pu6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_vsync_pd6 { + nvidia,pins = "vi_vsync_pd6", + "vi_hsync_pd7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <0>; + nvidia,ioreset = <0>; + }; + vi_d10_pt2 { + nvidia,pins = "vi_d10_pt2", + "vi_d0_pt4", "pbb0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_dqs_pi2", + "gmi_adv_n_pk0", + "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4", + "gmi_rst_n_pi4", + "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Vibrator control */ + vibrator { + nvidia,pins = "gmi_ad15_ph7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PWM pimnmux */ + pwm_0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwm_2 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi_cs6_n_pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Spdif pinmux */ + spdif_out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + vi_d4_pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi_d6_pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <0>; + nvidia,ioreset = <0>; + }; + vi_mclk_pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + jtag_rtck { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk1_out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3_out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + sys_clk_req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5", + "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* GPIO power/drive control */ + drive_dap1 { + nvidia,pins = "drive_dap1", + "drive_dap2", + "drive_dbg", + "drive_at5", + "drive_gme", + "drive_ddc", + "drive_ao1", + "drive_uart3"; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1", + "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>; + }; + }; + }; + + uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + + /* Broadcom GPS BCM47511 */ + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + bluetooth { + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + + vbat-supply = <&vdd_3v3_com>; + vddio-supply = <&vdd_1v8_vio>; + }; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + lcd_ddc: i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c2: i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c3: i2c@7000c500 { + status = "okay"; + + /* Aichi AMI306 digital compass */ + magnetometer@e { + compatible = "asahi-kasei,ak8974"; + reg = <0x0e>; + + avdd-supply = <&vdd_3v3_sys>; + dvdd-supply = <&vdd_1v8_vio>; + }; + + /* Dynaimage ambient light sensor */ + light-sensor@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&vdd_3v3_sys>; + }; + + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vdd_3v3_sys>; + vlogic-supply = <&vdd_1v8_vio>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0x0f>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vdd_1v8_vio>; + vddio-supply = <&vdd_1v8_vio>; + }; + }; + }; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <93750>; + }; + + i2c5: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + nct72: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&vdd_3v3_sys>; + #thermal-sensor-cells = <1>; + }; + + /* Texas Instruments TPS659110 PMIC */ + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + wakeup-source; + + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_bat>; + vcc2-supply = <&vdd_5v0_bat>; + vcc3-supply = <&vdd_1v8_vio>; + vcc4-supply = <&vdd_5v0_sys>; + vcc5-supply = <&vdd_5v0_bat>; + vcc6-supply = <&vdd_3v3_sys>; + vcc7-supply = <&vdd_5v0_bat>; + vccio-supply = <&vdd_5v0_bat>; + + pmic-sleep-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + }; + + regulators { + /* VDD1 is not used by Transformers */ + + vddio_ddr: vdd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8_vio: vio { + regulator-name = "vdd_1v8_gen"; + /* FIXME: eMMC won't work, if set to 1.8 V */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* eMMC VDD */ + vcore_emmc: ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* uSD slot VDD */ + vdd_usd: ldo2 { + regulator-name = "vdd_usd"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* uSD slot VDDIO */ + vddio_usd: ldo3 { + regulator-name = "vddio_usd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3100000>; + }; + + ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* LDO5 is not used by Transformers */ + + ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <8>; + }; + }; + }; + + vdd_core: core-regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,enable-vout-discharge; + ti,vsel0-state-high; + ti,vsel1-state-high; + + nvidia,tegra-core-regulator; + }; + }; + + vdd_5v0_bat: regulator-bat { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_cp: regulator-sby { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_5v0_sys: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_1v5_ddr: regulator-ddr { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_3v3_sys: regulator-3v { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_pnl: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_com: regulator-com { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_5v0_bl: regulator-bl { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + hdmi_5v0_sys: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + /* FIXME: LP1 doesn't work at the moment */ + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; + + /* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x81>; + }; + }; + + hda@70030000 { + status = "okay"; + }; + + ahub@70080000 { + i2s@70080400 { /* i2s1 */ + status = "okay"; + }; + + /* BT SCO */ + i2s@70080600 { /* i2s3 */ + status = "okay"; + }; + }; + + sdmmc1: mmc@78000000 { + status = "okay"; + + /* FIXME: Full 208Mhz clock rate doesn't work reliably */ + max-frequency = <104000000>; + + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + bus-width = <4>; + + vmmc-supply = <&vdd_usd>; /* ldo2 */ + vqmmc-supply = <&vddio_usd>; /* ldo3 */ + }; + + brcm_wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + sdmmc3: mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_com>; + vqmmc-supply = <&vdd_1v8_vio>; + + /* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */ + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + + sdmmc4: mmc@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; + mmc-ddr-3_3v; + non-removable; + }; + + /* USB via ASUS connector */ + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,hssync-start-delay = <0>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_5v0_sys>; + }; + + /* Dock's USB port */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&vdd_5v0_bat>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_bl>; + pwms = <&pwm 0 4000000>; + + brightness-levels = <1 255>; + num-interpolated-steps = <254>; + default-brightness-level = <40>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu2: cpu@2 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu3: cpu@3 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + mains: ac-adapter-detect { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + }; + + pad-keys { + compatible = "gpio-keys"; + interrupt-parent = <&gpio>; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; + interrupt-parent = <&gpio>; + + dock-hall-sensor { + label = "Lid sensor"; + gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <500>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + lineout-detect { + label = "Audio dock line-out detect"; + gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEOUT_INSERT>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + sound { + nvidia,i2s-controller = <&tegra_i2s1>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + thermal-zones { + /* + * NCT72 has two sensors: + * + * 0: internal that monitors ambient/skin temperature + * 1: external that is connected to the CPU's diode + * + * Ideally we should use userspace thermal governor, + * but it's a much more complex solution. The "skin" + * zone exists as a simpler solution which prevents + * Transformers from getting too hot from a user's + * tactile perspective. The CPU zone is intended to + * protect silicon from damage. + */ + + skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 0>; + + trips { + trip0: skin-alert { + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: skin-crit { + /* shut down at 65C */ + temperature = <65000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 1>; + + trips { + trip2: cpu-alert { + /* throttle at 75C until temperature drops to 74.8C */ + temperature = <75000>; + hysteresis = <200>; + type = "passive"; + }; + + trip3: cpu-crit { + /* shut down at 90C */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&trip2>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; +};
Signature · 1 line
2.33.1
Re: [PATCH v4 06/24] ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers
Quoted 1 line · Dmitry Osipenko
From: Svyatoslav Ryhel <[email protected]>
[...]
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi line 1068
Quoted 4 lines
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +4
-0+ i2c2: i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + };
[...]
Nit: You could now use the new controller handles directly - that would avoid some indentation and duplication. Though I understand it is a lot of tedious reformatting.
Best Regards
Michał Mirosław
Re: [PATCH v4 06/24] ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers
01.12.2021 13:07, Michał Mirosław пишет:
Quoted 9 lines · Dmitry Osipenko
Quoted 1 line
From: Svyatoslav Ryhel <[email protected]>
[...]
Quoted 4 lines
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +4
-0+ i2c2: i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + };[...]
Quoted 3 lines
Nit: You could now use the new controller handles directly - that would avoid some indentation and duplication. Though I understand it is a lot of tedious reformatting.
I see that there are people who prefer to use labels everywhere. Historically Tegra device-trees never used handles for nodes. I think should be better to convert all DTs together to keep them consistent, which I was asking to do before, but nobody wanted to put effort into doing that.
There are already quite a lot of DT changes scheduled for 5.17, perhaps better to defer the extra changes for 5.18. I will add it to my todo list, but if you're going to type the patches, then please either send them to me, or to ML, or create PR to grate kernel.
At some point in the past we had this common DTSI using labels for handles, but I asked to keep the DTs consistent, so we don't have them now.
PATCH v4 7/24 ARM: tegra: Add common device-tree for display panel of ASUS devices
In reply to Dmitry OsipenkoFrom: Maxim Schwalm <[email protected]>
All ASUS tablets have a similar design pattern in regards to hardware integration of display panels, like exactly the same GPIOs are used for power and reset, same LVDS bridge and etc. Add common device-tree for display panel of ASUS devices. It will be used by ASUS devices instead of replicating the boilerplate display graph.
--- .../boot/dts/tegra30-asus-lvds-display.dtsi | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi new file +61 -0
@@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */ + +/ { + host1x@50000000 { + lcd: dc@54200000 { + rgb { + status = "okay"; + + port@0 { + dpi_output: endpoint { + remote-endpoint = <&bridge_input>; + bus-width = <24>; + }; + }; + }; + }; + }; + + display-panel { + power-supply = <&vdd_pnl>; + ddc-i2c-bus = <&lcd_ddc>; + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&bridge_output>; + }; + }; + }; + + /* Texas Instruments SN75LVDS83B LVDS Transmitter */ + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + + powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_input: endpoint { + remote-endpoint = <&dpi_output>; + }; + }; + + port@1 { + reg = <1>; + + bridge_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + }; +};
Signature · 1 line
2.33.1
PATCH v4 8/24 ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Prime TF201, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 +++++++++++++++++++++++ 2 files changed, 624 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1321,6 +1321,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-PM269.dtb \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ + tegra30-asus-tf201.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +623 -0
623 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 9/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
In reply to Dmitry OsipenkoFrom: Michał Mirosław <[email protected]>
Add device-tree for ASUS Transformer Pad TF300T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 +++++++++++++++++++++ 2 files changed, 1031 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1322,6 +1322,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ + tegra30-asus-tf300t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300t.dts new file +1030 -0
1,030 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 10/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Pad TF300TG, which is NVIDIA Tegra30-based tablet device, a variant of TF300T that has 3g modem.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 ++++++++++++++++++++ 2 files changed, 1073 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1323,6 +1323,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ + tegra30-asus-tf300tg.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300tg.dts new file +1072 -0
1,072 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 11/24 ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Infinity TF700T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf700t.dts | 818 ++++++++++++++++++++++ 2 files changed, 819 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1324,6 +1324,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ tegra30-asus-tf300tg.dtb \ + tegra30-asus-tf700t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf700t.dts new file +818 -0
818 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 12/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C) tablet.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra114-asus-tf701t.dts | 802 +++++++++++++++++++++ 2 files changed, 803 insertions(+) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1331,6 +1331,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-colibri-eval-v3.dtb \ tegra30-ouya.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ + tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb
arch/arm/boot/dts/tegra114-asus-tf701t.dts new file +802 -0
802 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 13/24 ARM: tegra: Add device-tree for Pegatron Chagall tablet
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for Pegatron Chagall, which is NVIDIA Tegra30-based Android tablet.
--- arch/arm/boot/dts/Makefile | 3 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2794 +++++++++++++++++ 2 files changed, 2796 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
arch/arm/boot/dts/Makefile +2 -1
@@ -1329,7 +1329,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ tegra30-colibri-eval-v3.dtb \ - tegra30-ouya.dtb + tegra30-ouya.dtb \ + tegra30-pegatron-chagall.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \
arch/arm/boot/dts/tegra30-pegatron-chagall.dts new file +2794 -0
2,794 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v4 14/24 ARM: tegra: Add device-tree for 1080p version of Nyan Big
In reply to Dmitry OsipenkoAdd dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 11 +++++++++++ 2 files changed, 12 insertions(+) create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1341,6 +1341,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-apalis-v1.2-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ + tegra124-nyan-big-fhd.dtb \ tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U8500) += \
arch/arm/boot/dts/tegra124-nyan-big-fhd.dts new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra124-nyan-big.dts" + +/ { + /* Version of Nyan Big with 1080p panel */ + panel { + compatible = "auo,b133htn01"; + }; +};
Signature · 1 line
2.33.1
PATCH v4 15/24 ARM: tegra: Add usb-role-switch property to USB OTG ports
In reply to Dmitry OsipenkoFrom: Stefan Eichenberger <[email protected]>
If an USB port is an OTG port, then we should add the usb-role-switch property. Otherwise XUSB setup fails and therefore padctl is unable to set up the ports. This leads to broken USB and PCIe ports. Add the usb-role-switch properties to Tegra124 device-trees to fix the problem.
The error message shown without this patch is e.g:
usb2-0: usb-role-switch not found for otg mode
--- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 1 + arch/arm/boot/dts/tegra124-apalis.dtsi | 1 + arch/arm/boot/dts/tegra124-nyan.dtsi | 1 + arch/arm/boot/dts/tegra124-venice2.dts | 2 +- 4 files changed, 4 insertions(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +1 -0
@@ -1885,6 +1885,7 @@ ports { usb2-0 { status = "okay"; mode = "otg"; + usb-role-switch; vbus-supply = <®_usbo1_vbus>; };
arch/arm/boot/dts/tegra124-apalis.dtsi +1 -0
@@ -1877,6 +1877,7 @@ ports { usb2-0 { status = "okay"; mode = "otg"; + usb-role-switch; vbus-supply = <®_usbo1_vbus>; };
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -0
@@ -466,6 +466,7 @@ usb2-0 { vbus-supply = <&vdd_usb1_vbus>; status = "okay"; mode = "otg"; + usb-role-switch; }; usb2-1 {
arch/arm/boot/dts/tegra124-venice2.dts +1 -1
@@ -972,7 +972,7 @@ ports { usb2-0 { status = "okay"; mode = "otg"; - + usb-role-switch; vbus-supply = <&vdd_usb1_vbus>; };
Signature · 1 line
2.33.1
PATCH v4 16/24 ARM: tegra: Enable HDMI CEC on Nyan
In reply to Dmitry OsipenkoEnable HDMI CEC on Nyan Chromebooks. It allows to control TV over HDMI.
--- arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/tegra124-nyan.dtsi +4 -0
@@ -390,6 +390,10 @@ pmc@7000e400 { nvidia,sys-clock-req-active-high; }; + cec@70015000 { + status = "okay"; + }; + hda@70030000 { status = "okay"; };
Signature · 1 line
2.33.1
PATCH v4 17/24 ARM: tegra: Enable CPU DFLL on Nyan
In reply to Dmitry OsipenkoEnable CPU DFLL node on Nyan Chromebooks. DFLL was previously disabled due to Linux kernel CPUFreq driver which didn't support suspend-resume. That problem was fixed years ago, but DFLL was never re-enabled.
--- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -1
@@ -532,7 +532,7 @@ mmc@700b0600 { /* eMMC on this bus */ /* CPU DFLL clock */ clock@70110000 { - status = "disabled"; + status = "okay"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; };
Signature · 1 line
2.33.1
PATCH v4 18/24 ARM: tegra: Add CPU thermal zones to Nyan device-tree
In reply to Dmitry OsipenkoCPU of Nyan Chromebooks is overheating badly because apparently hardware soctherm controller doesn't work well. Add CPU thermal zones to enable software thermal control over CPU and fix the overheat trouble.
--- arch/arm/boot/dts/tegra124-nyan.dtsi | 49 +++++++++++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-nyan.dtsi +48 -1
@@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra124.dtsi" / {
@@ -87,7 +88,7 @@ acodec: audio-codec@10 { interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; - temperature-sensor@4c { + tmp451: temperature-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>;
@@ -789,6 +790,52 @@ gpio-restart { gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; priority = <200>; }; + + cpus { + cpu0: cpu@0 { + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + #cooling-cells = <2>; + }; + }; + + thermal-zones { + cpu-skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tmp451 0>; + + trips { + cpu_passive_trip: cpu-alert0 { + /* throttle at 70C until temperature drops to 69.8C */ + temperature = <70000>; + hysteresis = <200>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_passive_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; #include "cros-ec-keyboard.dtsi"
Signature · 1 line
2.33.1
PATCH v4 19/24 ARM: tegra: Name clock and regulator nodes according to DT-schema
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Name clocks and regulators according to DT-schema to fix warnings such as:
arch/arm/boot/dts/tegra20-acer-a500-picasso.dt.yaml: /: clock@0: 'anyOf' conditional failed, one must be fixed:
'reg' is a required property
'ranges' is a required property
From schema: /home/runner/.local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml
--- arch/arm/boot/dts/tegra114-dalmore.dts | 16 +++++------ arch/arm/boot/dts/tegra114-roth.dts | 14 +++++----- arch/arm/boot/dts/tegra114-tn7.dts | 8 +++--- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 ++++++++--------- arch/arm/boot/dts/tegra124-nyan.dtsi | 28 +++++++++---------- arch/arm/boot/dts/tegra124-venice2.dts | 28 +++++++++---------- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 ++++---- arch/arm/boot/dts/tegra20-harmony.dts | 16 +++++------ arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +++--- arch/arm/boot/dts/tegra20-paz00.dts | 6 ++-- arch/arm/boot/dts/tegra20-plutux.dts | 8 +++--- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +++++------ arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +-- arch/arm/boot/dts/tegra20-tec.dts | 8 +++--- arch/arm/boot/dts/tegra20-trimslice.dts | 12 ++++---- arch/arm/boot/dts/tegra20-ventana.dts | 12 ++++---- .../tegra30-asus-nexus7-grouper-common.dtsi | 10 +++---- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +-- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- arch/arm/boot/dts/tegra30-beaver.dts | 20 ++++++------- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 ++++---- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +++++----- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +++++++++---------- 23 files changed, 156 insertions(+), 156 deletions(-)
arch/arm/boot/dts/tegra114-dalmore.dts +8 -8
@@ -1151,7 +1151,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1186,7 +1186,7 @@ volume_up { }; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -1194,7 +1194,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - dvdd_ts_reg: regulator@1 { + dvdd_ts_reg: regulator-ts { compatible = "regulator-fixed"; regulator-name = "dvdd_ts"; regulator-min-microvolt = <1800000>;
@@ -1203,7 +1203,7 @@ dvdd_ts_reg: regulator@1 { gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@3 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -1214,7 +1214,7 @@ usb1_vbus_reg: regulator@3 { vin-supply = <&tps65090_dcdc1_reg>; }; - usb3_vbus_reg: regulator@4 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; regulator-min-microvolt = <5000000>;
@@ -1225,7 +1225,7 @@ usb3_vbus_reg: regulator@4 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_hdmi_reg: regulator@5 { + vdd_hdmi_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>;
@@ -1233,7 +1233,7 @@ vdd_hdmi_reg: regulator@5 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_cam_1v8_reg: regulator@6 { + vdd_cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "vdd_cam_1v8_reg"; regulator-min-microvolt = <1800000>;
@@ -1242,7 +1242,7 @@ vdd_cam_1v8_reg: regulator@6 { gpio = <&palmas_gpio 6 0>; }; - vdd_5v0_hdmi: regulator@7 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "VDD_5V0_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra114-roth.dts +7 -7
@@ -1016,7 +1016,7 @@ backlight: backlight { enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1045,7 +1045,7 @@ power { }; }; - lcd_bl_en: regulator@0 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "lcd_bl_en"; regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@ lcd_bl_en: regulator@0 { regulator-boot-on; }; - vdd_lcd: regulator@1 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "vdd_lcd_1v8"; regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@ vdd_lcd: regulator@1 { regulator-boot-on; }; - regulator@2 { + regulator-1v8ts { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_ts"; regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@ regulator@2 { regulator-boot-on; }; - regulator@3 { + regulator-3v3ts { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_ts"; regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@ regulator@3 { regulator-boot-on; }; - regulator@4 { + regulator-1v8com { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_com"; regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@ regulator@4 { regulator-boot-on; }; - regulator@5 { + regulator-3v3com { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_com"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra114-tn7.dts +4 -4
@@ -273,7 +273,7 @@ backlight: backlight { power-supply = <&lcd_bl_en>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -303,7 +303,7 @@ volume_up { }; /* FIXME: output of BQ24192 */ - vs_sys: regulator@0 { + vs_sys: regulator-vs { compatible = "regulator-fixed"; regulator-name = "VS_SYS"; regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@ vs_sys: regulator@0 { regulator-boot-on; }; - lcd_bl_en: regulator@1 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "VDD_LCD_BL"; regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@ lcd_bl_en: regulator@1 { regulator-boot-on; }; - vdd_lcd: regulator@2 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "VD_LCD_1V8"; regulator-min-microvolt = <1800000>;
arch/arm/boot/dts/tegra124-jetson-tk1.dts +13 -13
@@ -1868,7 +1868,7 @@ usb-phy@7d008000 { vbus-supply = <&vdd_usb3_vbus>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1892,7 +1892,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1901,7 +1901,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1911,7 +1911,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1921,7 +1921,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1933,7 +1933,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1941,7 +1941,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_usb1_vbus: regulator@5 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+USB0_VBUS_SW"; regulator-min-microvolt = <5000000>;
@@ -1952,7 +1952,7 @@ vdd_usb1_vbus: regulator@5 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@6 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1963,7 +1963,7 @@ vdd_usb3_vbus: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_lp0: regulator@7 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1975,7 +1975,7 @@ vdd_3v3_lp0: regulator@7 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@8 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1984,7 +1984,7 @@ vdd_hdmi_pll: regulator@8 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@9 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
@@ -1995,7 +1995,7 @@ vdd_5v0_hdmi: regulator@9 { }; /* Molex power connector */ - vdd_5v0_sata: regulator@10 { + vdd_5v0_sata: regulator-5v0sata { compatible = "regulator-fixed"; regulator-name = "+5V_SATA"; regulator-min-microvolt = <5000000>;
@@ -2005,7 +2005,7 @@ vdd_5v0_sata: regulator@10 { vin-supply = <&vdd_5v0_sys>; }; - vdd_12v0_sata: regulator@11 { + vdd_12v0_sata: regulator-12v0sata { compatible = "regulator-fixed"; regulator-name = "+12V_SATA"; regulator-min-microvolt = <12000000>;
arch/arm/boot/dts/tegra124-nyan.dtsi +14 -14
@@ -588,7 +588,7 @@ backlight: backlight { 256>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -621,7 +621,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -630,7 +630,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -640,7 +640,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -650,7 +650,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -662,7 +662,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -670,7 +670,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -678,7 +678,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -689,7 +689,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -700,7 +700,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -711,7 +711,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -721,7 +721,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -736,7 +736,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -745,7 +745,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra124-venice2.dts +14 -14
@@ -1061,7 +1061,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1086,7 +1086,7 @@ panel: panel { ddc-i2c-bus = <&dpaux>; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1095,7 +1095,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1105,7 +1105,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1115,7 +1115,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1127,7 +1127,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1135,7 +1135,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; regulator-min-microvolt = <3300000>;
@@ -1145,7 +1145,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -1156,7 +1156,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1167,7 +1167,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -1178,7 +1178,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -1188,7 +1188,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1203,7 +1203,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1212,7 +1212,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +6 -6
@@ -827,7 +827,7 @@ bat1010: battery-2s1p { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k-in { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -839,7 +839,7 @@ clk32k_in: clock@0 { * oscillator is used as a reference clock-source by the * Azurewave WiFi/BT module. */ - rtc_32k_wifi: clock@1 { + rtc_32k_wifi: clock-32k-wifi { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -964,7 +964,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -972,7 +972,7 @@ vdd_5v0_sys: regulator@0 { regulator-always-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_vs"; regulator-min-microvolt = <3300000>;
@@ -981,7 +981,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_1v8_sys: regulator@2 { + vdd_1v8_sys: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_vs"; regulator-min-microvolt = <1800000>;
@@ -990,7 +990,7 @@ vdd_1v8_sys: regulator@2 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@3 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-harmony.dts +8 -8
@@ -640,7 +640,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -666,7 +666,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -674,7 +674,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -682,7 +682,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -691,7 +691,7 @@ regulator@2 { enable-active-high; }; - pci_vdd_reg: regulator@3 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
@@ -700,7 +700,7 @@ pci_vdd_reg: regulator@3 { enable-active-high; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pn1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -709,7 +709,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -718,7 +718,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_5v0_hdmi: regulator@6 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-medcom-wide.dts +4 -4
@@ -92,7 +92,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -100,7 +100,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -109,7 +109,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -118,7 +118,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-paz00.dts +3 -3
@@ -575,7 +575,7 @@ backlight: backlight { default-brightness-level = <10>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -612,7 +612,7 @@ panel: panel { backlight = <&backlight>; }; - p5valw_reg: regulator@0 { + p5valw_reg: regulator-5v0alw { compatible = "regulator-fixed"; regulator-name = "+5valw"; regulator-min-microvolt = <5000000>;
@@ -620,7 +620,7 @@ p5valw_reg: regulator@0 { regulator-always-on; }; - vdd_pnl_reg: regulator@1 { + vdd_pnl_reg: regulator-3v0 { compatible = "regulator-fixed"; regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-plutux.dts +4 -4
@@ -60,7 +60,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-seaboard.dts +8 -8
@@ -792,7 +792,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -828,7 +828,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -836,7 +836,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -844,7 +844,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -853,7 +853,7 @@ regulator@2 { enable-active-high; }; - vbus_reg: regulator@3 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "vdd_vbus_wup1"; regulator-min-microvolt = <5000000>;
@@ -864,7 +864,7 @@ vbus_reg: regulator@3 { regulator-boot-on; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -873,7 +873,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -882,7 +882,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_hdmi: regulator@6 { + vdd_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-tamonten.dtsi +2 -2
@@ -502,13 +502,13 @@ mmc@c8000600 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>; }; - pci_vdd_reg: regulator@1 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-tec.dts +4 -4
@@ -69,7 +69,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-trimslice.dts +6 -6
@@ -379,7 +379,7 @@ mmc@c8000600 { bus-width = <4>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -401,7 +401,7 @@ poweroff { gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - hdmi_vdd_reg: regulator@0 { + hdmi_vdd_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi"; regulator-min-microvolt = <3300000>;
@@ -409,7 +409,7 @@ hdmi_vdd_reg: regulator@0 { regulator-always-on; }; - hdmi_pll_reg: regulator@1 { + hdmi_pll_reg: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi_pll"; regulator-min-microvolt = <1800000>;
@@ -417,7 +417,7 @@ hdmi_pll_reg: regulator@1 { regulator-always-on; }; - vbus_reg: regulator@2 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -428,7 +428,7 @@ vbus_reg: regulator@2 { regulator-boot-on; }; - pci_clk_reg: regulator@3 { + pci_clk_reg: regulator-pciclk { compatible = "regulator-fixed"; regulator-name = "pci_clk"; regulator-min-microvolt = <3300000>;
@@ -436,7 +436,7 @@ pci_clk_reg: regulator@3 { regulator-always-on; }; - pci_vdd_reg: regulator@4 { + pci_vdd_reg: regulator-pcivdd { compatible = "regulator-fixed"; regulator-name = "pci_vdd"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-ventana.dts +6 -6
@@ -606,7 +606,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -647,7 +647,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -655,7 +655,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -663,7 +663,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -672,7 +672,7 @@ regulator@2 { enable-active-high; }; - vdd_pnl_reg: regulator@3 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -681,7 +681,7 @@ vdd_pnl_reg: regulator@3 { enable-active-high; }; - vdd_bl_reg: regulator@4 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +5 -5
@@ -1069,7 +1069,7 @@ battery_cell: battery-cell { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -1207,7 +1207,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -1216,7 +1216,7 @@ vdd_5v0_sys: regulator@0 { regulator-boot-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -1226,7 +1226,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@2 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
@@ -1237,7 +1237,7 @@ vdd_pnl: regulator@2 { vin-supply = <&vdd_3v3_sys>; }; - vcc_3v3_ts: regulator@3 { + vcc_3v3_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "ldo_s-1167_3v3"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +2 -2
@@ -166,12 +166,12 @@ ldo8 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; - regulator@4 { + regulator-usb { compatible = "regulator-fixed"; regulator-name = "avdd_usb"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +1 -1
@@ -143,7 +143,7 @@ vdd_core: core-regulator@60 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; enable-active-high; };
arch/arm/boot/dts/tegra30-beaver.dts +10 -10
@@ -1966,7 +1966,7 @@ usb-phy@7d008000 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1985,7 +1985,7 @@ gpled2 { }; }; - vdd_5v_in_reg: regulator@0 { + vdd_5v_in_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v_in"; regulator-min-microvolt = <5000000>;
@@ -1993,7 +1993,7 @@ vdd_5v_in_reg: regulator@0 { regulator-always-on; }; - chargepump_5v_reg: regulator@1 { + chargepump_5v_reg: regulator-chargepump { compatible = "regulator-fixed"; regulator-name = "chargepump_5v"; regulator-min-microvolt = <5000000>;
@@ -2004,7 +2004,7 @@ chargepump_5v_reg: regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - ddr_reg: regulator@2 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -2016,7 +2016,7 @@ ddr_reg: regulator@2 { vin-supply = <&vdd_5v_in_reg>; }; - vdd_5v_sata_reg: regulator@3 { + vdd_5v_sata_reg: regulator-sata { compatible = "regulator-fixed"; regulator-name = "vdd_5v_sata"; regulator-min-microvolt = <5000000>;
@@ -2028,7 +2028,7 @@ vdd_5v_sata_reg: regulator@3 { vin-supply = <&vdd_5v_in_reg>; }; - usb1_vbus_reg: regulator@4 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -2039,7 +2039,7 @@ usb1_vbus_reg: regulator@4 { vin-supply = <&vdd_5v_in_reg>; }; - usb3_vbus_reg: regulator@5 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -2050,7 +2050,7 @@ usb3_vbus_reg: regulator@5 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_reg: regulator@6 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3,vdd_3v3_alw"; regulator-min-microvolt = <3300000>;
@@ -2062,7 +2062,7 @@ sys_3v3_reg: regulator@6 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_pexs_reg: regulator@7 { + sys_3v3_pexs_reg: regulator-pexs { compatible = "regulator-fixed"; regulator-name = "sys_3v3_pexs"; regulator-min-microvolt = <3300000>;
@@ -2074,7 +2074,7 @@ sys_3v3_pexs_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_5v0_hdmi: regulator@8 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+VDD_5V_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a02.dts +6 -6
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a04.dts +7 -7
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@ vdd_bl_reg: regulator@105 { gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; - vdd_bl2_reg: regulator@106 { + vdd_bl2_reg: regulator-bl2 { compatible = "regulator-fixed"; regulator-name = "vdd_bl2"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu.dtsi +14 -14
@@ -433,7 +433,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -475,7 +475,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -483,7 +483,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - cam_1v8_reg: regulator@1 { + cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "cam_1v8"; regulator-min-microvolt = <1800000>;
@@ -493,7 +493,7 @@ cam_1v8_reg: regulator@1 { vin-supply = <&vio_reg>; }; - cp_5v_reg: regulator@2 { + cp_5v_reg: regulator-5v0cp { compatible = "regulator-fixed"; regulator-name = "cp_5v"; regulator-min-microvolt = <5000000>;
@@ -504,7 +504,7 @@ cp_5v_reg: regulator@2 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - emmc_3v3_reg: regulator@3 { + emmc_3v3_reg: regulator-emmc { compatible = "regulator-fixed"; regulator-name = "emmc_3v3"; regulator-min-microvolt = <3300000>;
@@ -516,7 +516,7 @@ emmc_3v3_reg: regulator@3 { vin-supply = <&sys_3v3_reg>; }; - modem_3v3_reg: regulator@4 { + modem_3v3_reg: regulator-modem { compatible = "regulator-fixed"; regulator-name = "modem_3v3"; regulator-min-microvolt = <3300000>;
@@ -525,7 +525,7 @@ modem_3v3_reg: regulator@4 { gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; }; - pex_hvdd_3v3_reg: regulator@5 { + pex_hvdd_3v3_reg: regulator-pex { compatible = "regulator-fixed"; regulator-name = "pex_hvdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -535,7 +535,7 @@ pex_hvdd_3v3_reg: regulator@5 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam1_ldo_reg: regulator@6 { + vdd_cam1_ldo_reg: regulator-cam1 { compatible = "regulator-fixed"; regulator-name = "vdd_cam1_ldo"; regulator-min-microvolt = <2800000>;
@@ -545,7 +545,7 @@ vdd_cam1_ldo_reg: regulator@6 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam2_ldo_reg: regulator@7 { + vdd_cam2_ldo_reg: regulator-cam2 { compatible = "regulator-fixed"; regulator-name = "vdd_cam2_ldo"; regulator-min-microvolt = <2800000>;
@@ -555,7 +555,7 @@ vdd_cam2_ldo_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam3_ldo_reg: regulator@8 { + vdd_cam3_ldo_reg: regulator-cam3 { compatible = "regulator-fixed"; regulator-name = "vdd_cam3_ldo"; regulator-min-microvolt = <3300000>;
@@ -565,7 +565,7 @@ vdd_cam3_ldo_reg: regulator@8 { vin-supply = <&sys_3v3_reg>; }; - vdd_com_reg: regulator@9 { + vdd_com_reg: regulator-com { compatible = "regulator-fixed"; regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>;
@@ -577,7 +577,7 @@ vdd_com_reg: regulator@9 { vin-supply = <&sys_3v3_reg>; }; - vdd_fuse_3v3_reg: regulator@10 { + vdd_fuse_3v3_reg: regulator-fuse { compatible = "regulator-fixed"; regulator-name = "vdd_fuse_3v3"; regulator-min-microvolt = <3300000>;
@@ -587,7 +587,7 @@ vdd_fuse_3v3_reg: regulator@10 { vin-supply = <&sys_3v3_reg>; }; - vdd_pnl1_reg: regulator@11 { + vdd_pnl1_reg: regulator-pnl1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl1"; regulator-min-microvolt = <3300000>;
@@ -599,7 +599,7 @@ vdd_pnl1_reg: regulator@11 { vin-supply = <&sys_3v3_reg>; }; - vdd_vid_reg: regulator@12 { + vdd_vid_reg: regulator-vid { compatible = "regulator-fixed"; regulator-name = "vddio_vid"; regulator-min-microvolt = <5000000>;
Signature · 1 line
2.33.1
PATCH v4 20/24 ARM: tegra: nexus7: Drop clock-frequency from NFC node
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
The clock-frequency property was never used and is deprecated now. Remove it from Nexus 7 device-tree.
--- arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 -- 2 files changed, 3 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi +0 -1
@@ -137,7 +137,6 @@ i2c@7000c500 { nfc@28 { compatible = "nxp,pn544-i2c"; reg = <0x28>; - clock-frequency = <100000>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +0 -2
@@ -223,8 +223,6 @@ nfc@2a { compatible = "nxp,pn544-i2c"; reg = <0x2a>; - clock-frequency = <100000>; - interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
Signature · 1 line
2.33.1
PATCH v4 21/24 ARM: tegra: nexus7: Use common LVDS display device-tree
In reply to Dmitry OsipenkoFrom: Maxim Schwalm <[email protected]>
Make Nexus 7 device-tree to use common LVDS bridge description. This makes device-trees more consistent.
--- .../tegra30-asus-nexus7-grouper-common.dtsi | 54 ++----------------- 1 file changed, 3 insertions(+), 51 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +3 -51
@@ -8,6 +8,7 @@ #include "tegra30.dtsi" #include "tegra30-cpu-opp.dtsi" #include "tegra30-cpu-opp-microvolt.dtsi" +#include "tegra30-asus-lvds-display.dtsi" / { aliases {
@@ -59,21 +60,6 @@ trustzone@bfe00000 { }; }; - host1x@50000000 { - dc@54200000 { - rgb { - status = "okay"; - - port@0 { - lcd_output: endpoint { - remote-endpoint = <&lvds_encoder_input>; - bus-width = <24>; - }; - }; - }; - }; - }; - gpio@6000d000 { init-mode-hog { gpio-hog;
@@ -1114,20 +1100,14 @@ display-panel { */ compatible = "panel-lvds"; - power-supply = <&vdd_pnl>; - backlight = <&backlight>; - width-mm = <94>; height-mm = <150>; rotation = <180>; data-mapping = "jeida-24"; - port { - panel_input: endpoint { - remote-endpoint = <&lvds_encoder_output>; - }; - }; + /* DDC unconnected on Nexus 7 */ + /delete-property/ ddc-i2c-bus; }; firmware {
@@ -1179,34 +1159,6 @@ volume-down { }; }; - lvds-encoder { - compatible = "ti,sn75lvds83", "lvds-encoder"; - - powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; - power-supply = <&vdd_3v3_sys>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_encoder_input: endpoint { - remote-endpoint = <&lcd_output>; - }; - }; - - port@1 { - reg = <1>; - - lvds_encoder_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; - }; - }; - vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0";
Signature · 1 line
2.33.1
PATCH v4 22/24 ARM: tegra: Enable video decoder on Tegra114
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add Video Decoder Engine node to Tegra114 device-tree.
--- arch/arm/boot/dts/tegra114.dtsi | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
arch/arm/boot/dts/tegra114.dtsi +38 -0
@@ -17,6 +17,19 @@ memory@80000000 { reg = <0x80000000 0x0>; }; + sram@40000000 { + compatible = "mmio-sram"; + reg = <0x40000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000>; + + vde_pool: sram@400 { + reg = <0x400 0x3fc00>; + pool; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra114-host1x"; reg = <0x50000000 0x00028000>;
@@ -253,6 +266,30 @@ gpio: gpio@6000d000 { */ }; + vde@6001a000 { + compatible = "nvidia,tegra114-vde"; + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x400>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA114_CLK_VDE>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; + }; + apbmisc@70000800 { compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x70000800 0x64>, /* Chip revision */
@@ -543,6 +580,7 @@ mc: memory-controller@70019000 { interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; ahub@70080000 {
Signature · 1 line
2.33.1
PATCH v4 23/24 ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
In reply to Dmitry OsipenkoEnable charger and touchpad drivers found on Acer Tegra124 (Nyan) Chromebooks, display bridge found on ASUS TF700T and audio codecs found on ASUS tablets.
--- arch/arm/configs/tegra_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/configs/tegra_defconfig +6 -0
@@ -112,6 +112,8 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_CAP11XX=y +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_SMBUS=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y
@@ -131,6 +133,7 @@ CONFIG_SERIAL_DEV_BUS=y # CONFIG_HW_RANDOM is not set # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y
@@ -152,6 +155,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_BATTERY_SBS=y +CONFIG_CHARGER_BQ24735=y CONFIG_BATTERY_BQ27XXX=y CONFIG_CHARGER_GPIO=y CONFIG_CHARGER_SMB347=y
@@ -200,7 +204,9 @@ CONFIG_DRM_TEGRA_STAGING=y CONFIG_DRM_PANEL_LVDS=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y +CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y CONFIG_DRM_LVDS_CODEC=y +CONFIG_DRM_TOSHIBA_TC358768=y CONFIG_FB=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y
Signature · 1 line
2.33.1
PATCH v4 24/24 ARM: config: multi v7: Enable display drivers used by Tegra devices
In reply to Dmitry OsipenkoEnable display-related drivers used by various Tegra-based tablets.
--- arch/arm/configs/multi_v7_defconfig | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/configs/multi_v7_defconfig +5 -0
@@ -382,6 +382,7 @@ CONFIG_TCG_TPM=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m +CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_DEMUX_PINCTRL=y
@@ -680,19 +681,23 @@ CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_STM=m CONFIG_DRM_STM_DSI=m +CONFIG_DRM_PANEL_LVDS=m CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m +CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m CONFIG_DRM_PANEL_RAYDIUM_RM68200=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m +CONFIG_DRM_LVDS_CODEC=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII902X=m CONFIG_DRM_SII9234=m CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_TOSHIBA_TC358764=m +CONFIG_DRM_TOSHIBA_TC358768=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m
Signature · 1 line
2.33.1