Skip to contentSkip to conversation

NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)

PATCH Superseded Dmitry Osipenko 2 participants 34 messages Dec 8, 2021 – Dec 11, 2021

Subsystems (4)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)

In this patchset you will find:

- New device-trees of ASUS Transformer and Pegatron Chagall tablets.

- New device-tree of Nyan Big Chromebook variant that has 1080p display panel.

- Enabled video decoder on Tegra114.

- Minor cleanup of Nexus7 device-tree.

- Renamed clocks and regulator nodes. I'm sending this patch second time because previously there was no good reason given about why not to apply it. Please apply it this time.

- Fixes for T124 device-trees.

Changelog:

v5: - Minor update. Maxim improved commit messages. We added links to the
postmarketOS Wiki.

v4: - Factored out common parts of ASUS device-trees into separate patches.
I retained the original author of the tegra30-asus-transformer-common.dtsi after chatting with Svyatoslav. Initially I wanted to change the authorship to Michał, but not that much left from the original DT that was created by Michał, so it's fair to keep Svyatoslav the author. I explained in the commit message that the common DT was derived from the Michał's TF300T DT and then reworked heavily, I also added Michał as co-developer of the common part.

- Added new T124 patches that were requested by Thomas Graichen. They restore USB, CPUFreq and fix overheating of Nyan Chromebooks.

- Added patches that update tegra_defconfig and multi_v7_defconfig with enabled drivers used by ASUS Transformers and Nyan Chromebooks.

- Added acks that were given by Rob Herring to v3.

- Changed display panel compatible of ASUS TF701T like it was suggested by Rob Herring in other thread.

- Removed yet unused SDMMC1 pinmux from TF701T DT as was requested by Anton Bambura.

- Added patch which adds node labels to T30 DTSI. It eases porting devices to upstream. This was requested by Michał Mirosław.

v3: - Maxim added couple "FIXME" comments to Transformer device-trees for
things that are yet missing on kernel side, and thus, can't be enabled in the DT for now.

- Maxim also found that v2 had a small problem in the patch which adds device-tree for Chagall tablet. Turned out I made a mistake during rebase of the patches and haven't noticed it, it's fixed now.

v2: - Svyatoslav and Maxim made couple corrections to regulators, comments
and default brightness of the device-trees.

- Added thermtrip node to transformers DT as we now have PMIC fix for it [1], it works properly now.

[1] https://patchwork.ozlabs.org/project/linux-tegra/patch/[email protected]/

- Changed sound card model names to make them per-device and consistent with the names that other Tegra DTs already use in upstream. This will prevent potential ABI breakages in the future if we will find that sound of some device needs extra differentiation.

Anton Bambura (3):
ARM: tegra: Add labels to tegra114.dtsi
ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T
ARM: tegra: Enable video decoder on Tegra114

David Heidelberg (3):
dt-bindings: ARM: tegra: Document Pegatron Chagall
ARM: tegra: Name clock and regulator nodes according to DT-schema
ARM: tegra: nexus7: Drop clock-frequency from NFC node

Dmitry Osipenko (6):
ARM: tegra: Add device-tree for 1080p version of Nyan Big
ARM: tegra: Enable HDMI CEC on Nyan
ARM: tegra: Enable CPU DFLL on Nyan
ARM: tegra: Add CPU thermal zones to Nyan device-tree
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and
ASUS tablets
ARM: config: multi v7: Enable display drivers used by Tegra devices

Maxim Schwalm (2):
ARM: tegra: Add common device-tree for LVDS display panels of Tegra30
ASUS tablets
ARM: tegra: nexus7: Use common LVDS display device-tree

Michał Mirosław (2):
ARM: tegra: Add labels to tegra30.dtsi
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T

Nikola Milosavljevic (1):
ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

Stefan Eichenberger (1):
ARM: tegra: Add usb-role-switch property to USB OTG ports

Svyatoslav Ryhel (6):
dt-bindings: ARM: tegra: Document ASUS Transformers
ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers
ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
ARM: tegra: Add device-tree for Pegatron Chagall

 .../devicetree/bindings/arm/tegra.yaml        |   19 +
 arch/arm/boot/dts/Makefile                    |   10 +-
 arch/arm/boot/dts/tegra114-asus-tf701t.dts    |  802 +++++
 arch/arm/boot/dts/tegra114-dalmore.dts        |   16 +-
 arch/arm/boot/dts/tegra114-roth.dts           |   14 +-
 arch/arm/boot/dts/tegra114-tn7.dts            |    8 +-
 arch/arm/boot/dts/tegra114.dtsi               |   90 +-
 arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi   |    1 +
 arch/arm/boot/dts/tegra124-apalis.dtsi        |    1 +
 arch/arm/boot/dts/tegra124-jetson-tk1.dts     |   26 +-
 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts   |   11 +
 arch/arm/boot/dts/tegra124-nyan.dtsi          |   84 +-
 arch/arm/boot/dts/tegra124-venice2.dts        |   30 +-
 .../boot/dts/tegra20-acer-a500-picasso.dts    |   12 +-
 arch/arm/boot/dts/tegra20-asus-tf101.dts      | 1191 +++++++
 arch/arm/boot/dts/tegra20-harmony.dts         |   16 +-
 arch/arm/boot/dts/tegra20-medcom-wide.dts     |    8 +-
 arch/arm/boot/dts/tegra20-paz00.dts           |    6 +-
 arch/arm/boot/dts/tegra20-plutux.dts          |    8 +-
 arch/arm/boot/dts/tegra20-seaboard.dts        |   16 +-
 arch/arm/boot/dts/tegra20-tamonten.dtsi       |    4 +-
 arch/arm/boot/dts/tegra20-tec.dts             |    8 +-
 arch/arm/boot/dts/tegra20-trimslice.dts       |   12 +-
 arch/arm/boot/dts/tegra20-ventana.dts         |   12 +-
 .../boot/dts/tegra30-asus-lvds-display.dtsi   |   61 +
 .../tegra30-asus-nexus7-grouper-common.dtsi   |   64 +-
 ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi |    4 +-
 .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi  |    2 +-
 .../boot/dts/tegra30-asus-nexus7-grouper.dtsi |    1 -
 .../boot/dts/tegra30-asus-nexus7-tilapia.dtsi |    2 -
 arch/arm/boot/dts/tegra30-asus-tf201.dts      |  623 ++++
 arch/arm/boot/dts/tegra30-asus-tf300t.dts     | 1031 ++++++
 arch/arm/boot/dts/tegra30-asus-tf300tg.dts    | 1072 +++++++
 arch/arm/boot/dts/tegra30-asus-tf700t.dts     |  818 +++++
 .../dts/tegra30-asus-transformer-common.dtsi  | 1729 ++++++++++
 arch/arm/boot/dts/tegra30-beaver.dts          |   20 +-
 arch/arm/boot/dts/tegra30-cardhu-a02.dts      |   12 +-
 arch/arm/boot/dts/tegra30-cardhu-a04.dts      |   14 +-
 arch/arm/boot/dts/tegra30-cardhu.dtsi         |   28 +-
 .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2794 +++++++++++++++++
 arch/arm/boot/dts/tegra30.dtsi                |   36 +-
 arch/arm/configs/multi_v7_defconfig           |    5 +
 arch/arm/configs/tegra_defconfig              |    6 +
 43 files changed, 10469 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
 create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
 create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts
 create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
 create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
Signature · 1 line
2.33.1
#1 lore raw

PATCH v5 1/24 dt-bindings: ARM: tegra: Document ASUS Transformers

From: Svyatoslav Ryhel <[email protected]>

Document Tegra20/30/114-based ASUS Transformer Series tablet devices. This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG Infinity TF700T, TF701T.

---
 Documentation/devicetree/bindings/arm/tegra.yaml | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +16 -0
index 3bd0920da274..64b7b770a0dc 100644
@@ -36,6 +36,9 @@ properties:
               - toradex,colibri_t20-iris
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
+      - items:
+          - const: asus,tf101
+          - const: nvidia,tegra20
       - items:
           - const: acer,picasso
           - const: nvidia,tegra20
@@ -49,6 +52,18 @@ properties:
               - nvidia,cardhu-a04
           - const: nvidia,cardhu
           - const: nvidia,tegra30
+      - items:
+          - const: asus,tf201
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300t
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300tg
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf700t
+          - const: nvidia,tegra30
       - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
@@ -76,6 +91,7 @@ properties:
           - const: nvidia,tegra30
       - items:
           - enum:
+              - asus,tf701t
               - nvidia,dalmore
               - nvidia,roth
               - nvidia,tn7
Signature · 1 line
2.33.1
#2 lore raw

PATCH v5 2/24 dt-bindings: ARM: tegra: Document Pegatron Chagall

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

Document Pegatron Chagall, which is Tegra30-based tablet device.

---
 Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +3 -0
index 64b7b770a0dc..49841ca272ee 100644
@@ -89,6 +89,9 @@ properties:
       - items:
           - const: ouya,ouya
           - const: nvidia,tegra30
+      - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
       - items:
           - enum:
               - asus,tf701t
Signature · 1 line
2.33.1
#3 lore raw

Re: [PATCH v5 02/24] dt-bindings: ARM: tegra: Document Pegatron Chagall

Quoted 9 lines · Dmitry Osipenko

From: David Heidelberg <[email protected]>

Document Pegatron Chagall, which is Tegra30-based tablet device.

---
 Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++
 1 file changed, 3 insertions(+)

This and many others in the set are missing your Signed-off-by. See "Developer's Certificate of Origin 1.1" in Documentation/process/submitting-patches.rst for a rationale why that's important.

Thierry

#4 lore raw

Re: [PATCH v5 02/24] dt-bindings: ARM: tegra: Document Pegatron Chagall

10.12.2021 18:19, Thierry Reding пишет:

Quoted 11 lines · Dmitry Osipenko
Quoted 9 lines

From: David Heidelberg <[email protected]>

Document Pegatron Chagall, which is Tegra30-based tablet device.

---
 Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++
 1 file changed, 3 insertions(+)
Quoted 4 lines

This and many others in the set are missing your Signed-off-by. See "Developer's Certificate of Origin 1.1" in Documentation/process/submitting-patches.rst for a rationale why that's important.

I specifically checked documentation about this in the past, now I see that it says that s-b should from people in the delivery path. Wish checkpatch could tell about that.

Please either add my s-b by yourself while applying or let me know if I should make v6.

#5 lore raw

PATCH v5 3/24 ARM: tegra: Add labels to tegra30.dtsi

In reply to Dmitry Osipenko

From: Michał Mirosław <[email protected]>

Add phandle names for memory/I2C/SPI/USB/SDMMC controller nodes to allow for cleaner device descriptions.

---
 arch/arm/boot/dts/tegra30.dtsi | 36 +++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/tegra30.dtsi +18 -18
index ae3df73c20a7..a6772171c910 100644
@@ -585,7 +585,7 @@ rtc@7000e000 {
 		clocks = <&tegra_car TEGRA30_CLK_RTC>;
 	};
 
-	i2c@7000c000 {
+	i2c1: i2c@7000c000 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -601,7 +601,7 @@ i2c@7000c000 {
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c2: i2c@7000c400 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +617,7 @@ i2c@7000c400 {
 		status = "disabled";
 	};
 
-	i2c@7000c500 {
+	i2c3: i2c@7000c500 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c500 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -633,7 +633,7 @@ i2c@7000c500 {
 		status = "disabled";
 	};
 
-	i2c@7000c700 {
+	i2c4: i2c@7000c700 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c700 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -649,7 +649,7 @@ i2c@7000c700 {
 		status = "disabled";
 	};
 
-	i2c@7000d000 {
+	i2c5: i2c@7000d000 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000d000 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -665,7 +665,7 @@ i2c@7000d000 {
 		status = "disabled";
 	};
 
-	spi@7000d400 {
+	spi1: spi@7000d400 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ spi@7000d400 {
 		status = "disabled";
 	};
 
-	spi@7000d600 {
+	spi2: spi@7000d600 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -693,7 +693,7 @@ spi@7000d600 {
 		status = "disabled";
 	};
 
-	spi@7000d800 {
+	spi3: spi@7000d800 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -707,7 +707,7 @@ spi@7000d800 {
 		status = "disabled";
 	};
 
-	spi@7000da00 {
+	spi4: spi@7000da00 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -721,7 +721,7 @@ spi@7000da00 {
 		status = "disabled";
 	};
 
-	spi@7000dc00 {
+	spi5: spi@7000dc00 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -735,7 +735,7 @@ spi@7000dc00 {
 		status = "disabled";
 	};
 
-	spi@7000de00 {
+	spi6: spi@7000de00 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -913,7 +913,7 @@ tegra_i2s4: i2s@70080700 {
 		};
 	};
 
-	mmc@78000000 {
+	sdmmc1: mmc@78000000 {
 		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -924,7 +924,7 @@ mmc@78000000 {
 		status = "disabled";
 	};
 
-	mmc@78000200 {
+	sdmmc2: mmc@78000200 {
 		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -935,7 +935,7 @@ mmc@78000200 {
 		status = "disabled";
 	};
 
-	mmc@78000400 {
+	sdmmc3: mmc@78000400 {
 		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -946,7 +946,7 @@ mmc@78000400 {
 		status = "disabled";
 	};
 
-	mmc@78000600 {
+	sdmmc4: mmc@78000600 {
 		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -957,7 +957,7 @@ mmc@78000600 {
 		status = "disabled";
 	};
 
-	usb@7d000000 {
+	usb1: usb@7d000000 {
 		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -999,7 +999,7 @@ phy1: usb-phy@7d000000 {
 		status = "disabled";
 	};
 
-	usb@7d004000 {
+	usb2: usb@7d004000 {
 		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d004000 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -1039,7 +1039,7 @@ phy2: usb-phy@7d004000 {
 		status = "disabled";
 	};
 
-	usb@7d008000 {
+	usb3: usb@7d008000 {
 		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.33.1
#6 lore raw

Re: [PATCH v5 03/24] ARM: tegra: Add labels to tegra30.dtsi

Quoted 9 lines · Dmitry Osipenko

From: Michał Mirosław <[email protected]>

Add phandle names for memory/I2C/SPI/USB/SDMMC controller nodes to allow for cleaner device descriptions.

---
 arch/arm/boot/dts/tegra30.dtsi | 36 +++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)

We typically only add those when they are really needed. These are technically harmless because without a reference, DTC won't actually create a phandle property, but dangling labels are the kind of thing that some janitor may at some point want to remove with some scripts, so I'm hesitant to apply this because it'll likely cause churn in the future.

Thierry

#7 lore raw

Re: [PATCH v5 03/24] ARM: tegra: Add labels to tegra30.dtsi

10.12.2021 18:22, Thierry Reding пишет:

Quoted 11 lines · Dmitry Osipenko
Quoted 9 lines

From: Michał Mirosław <[email protected]>

Add phandle names for memory/I2C/SPI/USB/SDMMC controller nodes to allow for cleaner device descriptions.

---
 arch/arm/boot/dts/tegra30.dtsi | 36 +++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
Quoted 6 lines

We typically only add those when they are really needed. These are technically harmless because without a reference, DTC won't actually create a phandle property, but dangling labels are the kind of thing that some janitor may at some point want to remove with some scripts, so I'm hesitant to apply this because it'll likely cause churn in the future.

The plan is to add labels for T20 and switch all DTs to use those phandles consistently, but that's the plan for the next kernel release.

Those labels are practically useful when you porting something from old downstream kernel because it uses those human-readable names instead of the addresses.

#8 lore raw

PATCH v5 4/24 ARM: tegra: Add labels to tegra114.dtsi

In reply to Dmitry Osipenko

From: Anton Bambura <[email protected]>

Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.

---
 arch/arm/boot/dts/tegra114.dtsi | 52 ++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 26 deletions(-)
arch/arm/boot/dts/tegra114.dtsi +26 -26
index 546272e396b4..563ee262f41d 100644
@@ -93,7 +93,7 @@ rgb {
 			};
 		};
 
-		hdmi@54280000 {
+		hdmi: hdmi@54280000 {
 			compatible = "nvidia,tegra114-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -105,7 +105,7 @@ hdmi@54280000 {
 			status = "disabled";
 		};
 
-		dsi@54300000 {
+		dsia: dsi@54300000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +121,7 @@ dsi@54300000 {
 			#size-cells = <0>;
 		};
 
-		dsi@54400000 {
+		dsib: dsi@54400000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -335,7 +335,7 @@ pwm: pwm@7000a000 {
 		status = "disabled";
 	};
 
-	i2c@7000c000 {
+	i2c1: i2c@7000c000 {
 		compatible = "nvidia,tegra114-i2c";
 		reg = <0x7000c000 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +350,7 @@ i2c@7000c000 {
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c2: i2c@7000c400 {
 		compatible = "nvidia,tegra114-i2c";
 		reg = <0x7000c400 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,7 +365,7 @@ i2c@7000c400 {
 		status = "disabled";
 	};
 
-	i2c@7000c500 {
+	i2c3: i2c@7000c500 {
 		compatible = "nvidia,tegra114-i2c";
 		reg = <0x7000c500 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -380,7 +380,7 @@ i2c@7000c500 {
 		status = "disabled";
 	};
 
-	i2c@7000c700 {
+	i2c4: i2c@7000c700 {
 		compatible = "nvidia,tegra114-i2c";
 		reg = <0x7000c700 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -395,7 +395,7 @@ i2c@7000c700 {
 		status = "disabled";
 	};
 
-	i2c@7000d000 {
+	i2c5: i2c@7000d000 {
 		compatible = "nvidia,tegra114-i2c";
 		reg = <0x7000d000 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@ i2c@7000d000 {
 		status = "disabled";
 	};
 
-	spi@7000d400 {
+	spi1: spi@7000d400 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +425,7 @@ spi@7000d400 {
 		status = "disabled";
 	};
 
-	spi@7000d600 {
+	spi2: spi@7000d600 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -440,7 +440,7 @@ spi@7000d600 {
 		status = "disabled";
 	};
 
-	spi@7000d800 {
+	spi3: spi@7000d800 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@ spi@7000d800 {
 		status = "disabled";
 	};
 
-	spi@7000da00 {
+	spi4: spi@7000da00 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -470,7 +470,7 @@ spi@7000da00 {
 		status = "disabled";
 	};
 
-	spi@7000dc00 {
+	spi5: spi@7000dc00 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,7 +485,7 @@ spi@7000dc00 {
 		status = "disabled";
 	};
 
-	spi@7000de00 {
+	spi6: spi@7000de00 {
 		compatible = "nvidia,tegra114-spi";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,14 +500,14 @@ spi@7000de00 {
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_RTC>;
 	};
 
-	kbc@7000e200 {
+	tegra_kbc: kbc@7000e200 {
 		compatible = "nvidia,tegra114-kbc";
 		reg = <0x7000e200 0x100>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +646,7 @@ mipi: mipi@700e3000 {
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
-	mmc@78000000 {
+	sdmmc1: mmc@78000000 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,7 +657,7 @@ mmc@78000000 {
 		status = "disabled";
 	};
 
-	mmc@78000200 {
+	sdmmc2: mmc@78000200 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,7 +668,7 @@ mmc@78000200 {
 		status = "disabled";
 	};
 
-	mmc@78000400 {
+	sdmmc3: mmc@78000400 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ mmc@78000400 {
 		status = "disabled";
 	};
 
-	mmc@78000600 {
+	sdmmc4: mmc@78000600 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -690,7 +690,7 @@ mmc@78000600 {
 		status = "disabled";
 	};
 
-	usb@7d000000 {
+	usb1: usb@7d000000 {
 		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,11 +698,11 @@ usb@7d000000 {
 		clocks = <&tegra_car TEGRA114_CLK_USBD>;
 		resets = <&tegra_car 22>;
 		reset-names = "usb";
-		nvidia,phy = <&phy1>;
+		nvidia,phy = <&usb1_phy>;
 		status = "disabled";
 	};
 
-	phy1: usb-phy@7d000000 {
+	usb1_phy: usb-phy@7d000000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
@@ -730,7 +730,7 @@ phy1: usb-phy@7d000000 {
 		status = "disabled";
 	};
 
-	usb@7d008000 {
+	usb3: usb@7d008000 {
 		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -738,11 +738,11 @@ usb@7d008000 {
 		clocks = <&tegra_car TEGRA114_CLK_USB3>;
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
-		nvidia,phy = <&phy3>;
+		nvidia,phy = <&usb3_phy>;
 		status = "disabled";
 	};
 
-	phy3: usb-phy@7d008000 {
+	usb3_phy: usb-phy@7d008000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
Signature · 1 line
2.33.1
#9 lore raw

PATCH v5 5/24 ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

In reply to Dmitry Osipenko

From: Nikola Milosavljevic <[email protected]>

Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.

---
 arch/arm/boot/dts/Makefile               |    1 +
 arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 ++++++++++++++++++++++
 2 files changed, 1192 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
arch/arm/boot/dts/Makefile +1 -0
index 8a2dfdf01ce3..8fdebf7c1afe 100644
@@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \
 	suniv-f1c100s-licheepi-nano.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
 	tegra20-colibri-iris.dtb \
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +1191 -0

1,191 lines not on this page · raw message

Signature · 1 line
2.33.1
#10 lore raw

Re: [PATCH v5 05/24] ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

Quoted 125 lines · Dmitry Osipenko

From: Nikola Milosavljevic <[email protected]>

Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.

---
 arch/arm/boot/dts/Makefile               |    1 +
 arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 ++++++++++++++++++++++
 2 files changed, 1192 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
arch/arm/boot/dts/Makefile +1 -0
index 8a2dfdf01ce3..8fdebf7c1afe 100644
@@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \
 	suniv-f1c100s-licheepi-nano.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
 	tegra20-colibri-iris.dtb \
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +87 -0
new file mode 100644
index 000000000000..4dc0722c28f5
@@ -0,0 +1,1191 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "ASUS EeePad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/tegra20-asus-tf101.dts line 97

Quoted 10 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +10 -0
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};

Isn't this something that we may want to change at some point? My understanding is that GPIO hogs are permanent, so it won't be possible to grab GPIO R.6 and change this.

Are there any plans to allow setting this at runtime?

[...]

arch/arm/boot/dts/tegra20-asus-tf101.dts line 531

Quoted 6 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +6 -0
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {

This doesn't belong here. The ordering is by unit-address and everything without unit-address needs to move after the nodes with unit-addresses and be sorted alphabetically.

Quoted 554 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +554 -0
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;

arch/arm/boot/dts/tegra20-asus-tf101.dts line 1095

Quoted 10 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +10 -0
+			#size-cells = <0>;
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id1 = <1>;
+				density = <2048>;
+				io-width = <16>;
+			};
+
+			emc-table@25000 {

Ugh... looking at the bindings for this the naming here is rather unfortunate. emc-tables@3 and emc-table@*... the top-level emc-tables are really tables, but the emc-table@* are really entries or rows in that table, not tables themselves. It's also rather unfortunate that we duplicate the frequency in both the "reg" and "clock-frequency" properties. One of them would've been enough.

Anyway, looks like this has basically been like this since forever, so not much that can be done about it.

Again, the memory-controller node needs to be sorted differently. There are other occurrences of this throughout the file.

Thierry

#11 lore raw

Re: [PATCH v5 05/24] ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

10.12.2021 18:46, Thierry Reding пишет:
...

Quoted 12 lines

arch/arm/boot/dts/tegra20-asus-tf101.dts line 97

Quoted 7 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +7 -0
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};

Isn't this something that we may want to change at some point? My understanding is that GPIO hogs are permanent, so it won't be possible to grab GPIO R.6 and change this.

Quoted 1 line

Are there any plans to allow setting this at runtime?

I'm not aware about plans to change that charging hog.

It's not a problem to remove the hog. I don't understand why you're saying that it's permanent. We have such hogs in Nexus7 DT for the 3G modem pins. If we'll ever have a driver for that modem, then we will remove those hogs, not a problem.

Quoted 11 lines

[...]

arch/arm/boot/dts/tegra20-asus-tf101.dts line 531

Quoted 6 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +6 -0
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {

This doesn't belong here. The ordering is by unit-address and everything without unit-address needs to move after the nodes with unit-addresses and be sorted alphabetically.

Logically it belongs here, since mux uses i2c2. All other DTs do the same.

...

Quoted 16 lines
Quoted 16 lines
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +16 -0
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id1 = <1>;
+				density = <2048>;
+				io-width = <16>;
+			};
+
Quoted 8 lines

arch/arm/boot/dts/tegra20-asus-tf101.dts line 1095

Quoted 1 line
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +1 -0
+			emc-table@25000 {

Ugh... looking at the bindings for this the naming here is rather unfortunate. emc-tables@3 and emc-table@*... the top-level emc-tables are really tables, but the emc-table@* are really entries or rows in that table, not tables themselves. It's also rather unfortunate that we duplicate the frequency in both the "reg" and "clock-frequency" properties. One of them would've been enough.

It's emc-tables@3 here because initially there were other tables that I removed during preparation of the DT for upstream. Those tables were untested and looked questionable to me.

Quoted 5 lines

Anyway, looks like this has basically been like this since forever, so not much that can be done about it.

Again, the memory-controller node needs to be sorted differently. There are other occurrences of this throughout the file.

Please feel free to reorder it.

#12 lore raw

Re: [PATCH v5 05/24] ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

In reply to Thierry Reding

10.12.2021 18:46, Thierry Reding пишет:

Quoted 2 lines

Again, the memory-controller node needs to be sorted differently. There are other occurrences of this throughout the file.

Memory-controller node is placed on purpose in the end of DT to keep it readable. Those huge timings make it unreadable. I don't want to change it. Alternatively, we can factor out timings into separate DTSI, but it's unnecessary to me. I leave it up to you to decide what to do.

I'll reorder couple nodes alphabetically, those that don't have address and were missed by me. The by-address nodes are all okay to me.

Please feel free to reorder nodes to yours liking by yourself while applying if I'll miss something.

#13 lore raw

PATCH v5 6/24 ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers

In reply to Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out of the ASUS TF300T tablet's device-tree that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria et al.

---
 .../dts/tegra30-asus-transformer-common.dtsi  | 1729 +++++++++++++++++
 1 file changed, 1729 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1729 -0
new file mode 100644
index 000000000000..be77212dd8c7
@@ -0,0 +1,1729 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4;	/* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		usb-charge-limit-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			output-high;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive_sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			gen2_i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			cam_i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			ddc_i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			pwr_i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hotplug_i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi_cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hdmi_hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb_txd_rts {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb_rxd_cts {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc_rxd_cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc_txd_rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap_i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout {
+				nvidia,pins = "dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct_irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec_irqs {
+				nvidia,pins = "kb_row10_ps2",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec_reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem_boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l2_clkreq_n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_wake_n_pdd3",
+						"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row12_ps4",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power_key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol_keys {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt_shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt_dev_wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt_host_wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_rst_n_pi4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pimnmux */
+			pwm_0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm_2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif_out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+						"clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c3: i2c@7000c500 {
+		status = "okay";
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_vio>;
+		};
+
+		/* Dynaimage ambient light sensor */
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c5: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Transformers */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					/* FIXME: Without this, voltage switching fails */
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* LDO5 is not used by Transformers */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		/* FIXME: LP1 doesn't work at the moment */
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		/* FIXME: Full 208Mhz clock rate doesn't work reliably */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		mmc-ddr-3_3v;
+		non-removable;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 4000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	pad-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		nvidia,i2s-controller = <&tegra_i2s1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
Signature · 1 line
2.33.1
#14 lore raw

Re: [PATCH v5 06/24] ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers

Quoted 33 lines · Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out of the ASUS TF300T tablet's device-tree that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria et al.

---
 .../dts/tegra30-asus-transformer-common.dtsi  | 1729 +++++++++++++++++
 1 file changed, 1729 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +5 -0
new file mode 100644
index 000000000000..be77212dd8c7
@@ -0,0 +1,1729 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>

arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi line 15

Quoted 10 lines
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +10 -0
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4;	/* eMMC */

Looks like a tab snuck in there... otherwise this also has some nodes sorted in the wrong order.

[...]

arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi line 1569

Quoted 1 line
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1 -0
+	pad-keys {

Any specific reason why this is called pad-keys? We call it gpio-keys everywhere else.

Thierry

#15 lore raw

Re: [PATCH v5 06/24] ARM: tegra: Add common device-tree base for Tegra30 ASUS Transformers

10.12.2021 18:50, Thierry Reding пишет:

Quoted 39 lines · Dmitry Osipenko
Quoted 38 lines

From: Svyatoslav Ryhel <[email protected]>

Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out of the ASUS TF300T tablet's device-tree that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria et al.

---
 .../dts/tegra30-asus-transformer-common.dtsi  | 1729 +++++++++++++++++
 1 file changed, 1729 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +10 -0
new file mode 100644
index 000000000000..be77212dd8c7
@@ -0,0 +1,1729 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
Quoted 8 lines

arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi line 15

Quoted 5 lines
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +5 -0
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4;	/* eMMC */

Looks like a tab snuck in there... otherwise this also has some nodes sorted in the wrong order.

I was fixing these tabs, but missed that one. Good catch.

Apparently I missed to recheck the order after the most recent changes, good that you noticed it.

Quoted 5 lines

[...]

arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi line 1569

Quoted 1 line
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1 -0
+	pad-keys {

Any specific reason why this is called pad-keys? We call it gpio-keys everywhere else.

Not sure about the name. Perhaps Svyatoslav likes the pad-keys name more. I recall it was named gpio-keys at some point in the past.

Again, will you change it all by yourself or should I make v6?

#16 lore raw

PATCH v5 7/24 ARM: tegra: Add common device-tree for LVDS display panels of Tegra30 ASUS tablets

In reply to Dmitry Osipenko

From: Maxim Schwalm <[email protected]>

All Tegra30 ASUS tablets have a similar design pattern in terms of hardware integration of LVDS display panels, like exactly the same GPIOs are used for power and reset, etc. Add a common device-tree for LVDS display panels of Tegra30 ASUS tablets to avoid replicating the boilerplate panel description.

[[email protected]: factored out common part into separate patch and wrote commit message]
---
 .../boot/dts/tegra30-asus-lvds-display.dtsi   | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi new file +61 -0
new file mode 100644
index 000000000000..a047abfa6369
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
+
+/ {
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	display-panel {
+		power-supply = <&vdd_pnl>;
+		ddc-i2c-bus = <&lcd_ddc>;
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&bridge_output>;
+			};
+		};
+	};
+
+	/* Texas Instruments SN75LVDS83B LVDS Transmitter */
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_input: endpoint {
+					remote-endpoint = <&dpi_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+};
Signature · 1 line
2.33.1
#17 lore raw

PATCH v5 8/24 ARM: tegra: Add device-tree for ASUS Transformer Prime TF201

In reply to Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add device-tree for ASUS Transformer Prime TF201, which is a NVIDIA Tegra30-based 2-in-1 detachable, orignally running Android.

---
 arch/arm/boot/dts/Makefile               |   1 +
 arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 +++++++++++++++++++++++
 2 files changed, 624 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts
arch/arm/boot/dts/Makefile +1 -0
index 8fdebf7c1afe..a72aab08e4db 100644
@@ -1321,6 +1321,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-nexus7-grouper-PM269.dtb \
 	tegra30-asus-nexus7-grouper-E1565.dtb \
 	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-tf201.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +623 -0

623 lines not on this page · raw message

Signature · 1 line
2.33.1
#18 lore raw

PATCH v5 9/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T

In reply to Dmitry Osipenko

From: Michał Mirosław <[email protected]>

Add device-tree for ASUS Transformer Pad TF300T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android.

---
 arch/arm/boot/dts/Makefile                |    1 +
 arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1031 +++++++++++++++++++++
 2 files changed, 1032 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts
arch/arm/boot/dts/Makefile +1 -0
index a72aab08e4db..85477066bb2d 100644
@@ -1322,6 +1322,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-nexus7-grouper-E1565.dtb \
 	tegra30-asus-nexus7-tilapia-E1565.dtb \
 	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300t.dts new file +1031 -0

1,031 lines not on this page · raw message

Signature · 1 line
2.33.1
#19 lore raw

PATCH v5 10/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG

In reply to Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. It's a variant of the TF300T that has a 3G modem.

---
 arch/arm/boot/dts/Makefile                 |    1 +
 arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 ++++++++++++++++++++
 2 files changed, 1073 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts
arch/arm/boot/dts/Makefile +1 -0
index 85477066bb2d..fcbcaed0c2da 100644
@@ -1323,6 +1323,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-nexus7-tilapia-E1565.dtb \
 	tegra30-asus-tf201.dtb \
 	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300tg.dts new file +1072 -0

1,072 lines not on this page · raw message

Signature · 1 line
2.33.1
#20 lore raw

PATCH v5 11/24 ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T

In reply to Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add device-tree for ASUS Transformer Infinity TF700T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android.

---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/tegra30-asus-tf700t.dts | 818 ++++++++++++++++++++++
 2 files changed, 819 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts
arch/arm/boot/dts/Makefile +1 -0
index fcbcaed0c2da..87166d66e0b1 100644
@@ -1324,6 +1324,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-tf201.dtb \
 	tegra30-asus-tf300t.dtb \
 	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf700t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf700t.dts new file +818 -0

818 lines not on this page · raw message

Signature · 1 line
2.33.1
#21 lore raw

PATCH v5 12/24 ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T

In reply to Dmitry Osipenko

From: Anton Bambura <[email protected]>

Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C) tablet.

---
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/tegra114-asus-tf701t.dts | 802 +++++++++++++++++++++
 2 files changed, 803 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts
arch/arm/boot/dts/Makefile +1 -0
index 87166d66e0b1..e59e7973990d 100644
@@ -1331,6 +1331,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-colibri-eval-v3.dtb \
 	tegra30-ouya.dtb
 dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
 	tegra114-dalmore.dtb \
 	tegra114-roth.dtb \
 	tegra114-tn7.dtb
arch/arm/boot/dts/tegra114-asus-tf701t.dts new file +802 -0

802 lines not on this page · raw message

Signature · 1 line
2.33.1
#22 lore raw

PATCH v5 13/24 ARM: tegra: Add device-tree for Pegatron Chagall

In reply to Dmitry Osipenko

From: Svyatoslav Ryhel <[email protected]>

Add device-tree for Pegatron Chagall, which is a NVIDIA Tegra30-based Android tablet.

---
 arch/arm/boot/dts/Makefile                    |    3 +-
 .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2794 +++++++++++++++++
 2 files changed, 2796 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
arch/arm/boot/dts/Makefile +2 -1
index e59e7973990d..26798673739c 100644
@@ -1329,7 +1329,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra30-colibri-eval-v3.dtb \
-	tegra30-ouya.dtb
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
 dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
 	tegra114-asus-tf701t.dtb \
 	tegra114-dalmore.dtb \
arch/arm/boot/dts/tegra30-pegatron-chagall.dts new file +2794 -0

2,794 lines not on this page · raw message

Signature · 1 line
2.33.1
#23 lore raw

PATCH v5 14/24 ARM: tegra: Add device-tree for 1080p version of Nyan Big

In reply to Dmitry Osipenko

Add dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree.

---
 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 11 +++++++++++
 2 files changed, 12 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
arch/arm/boot/dts/Makefile +1 -0
index 26798673739c..561e0eae05a9 100644
@@ -1341,6 +1341,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-apalis-v1.2-eval.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
 	tegra124-nyan-blaze.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
arch/arm/boot/dts/tegra124-nyan-big-fhd.dts new file +11 -0
new file mode 100644
index 000000000000..d35fb79d2f51
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan-big.dts"
+
+/ {
+	/* Version of Nyan Big with 1080p panel */
+	panel {
+		compatible = "auo,b133htn01";
+	};
+};
Signature · 1 line
2.33.1
#24 lore raw

PATCH v5 15/24 ARM: tegra: Add usb-role-switch property to USB OTG ports

In reply to Dmitry Osipenko

From: Stefan Eichenberger <[email protected]>

If an USB port is an OTG port, then we should add the usb-role-switch property. Otherwise XUSB setup fails and therefore padctl is unable to set up the ports. This leads to broken USB and PCIe ports. Add the usb-role-switch properties to Tegra124 device-trees to fix the problem.

The error message shown without this patch is e.g:
usb2-0: usb-role-switch not found for otg mode

---
 arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 1 +
 arch/arm/boot/dts/tegra124-apalis.dtsi      | 1 +
 arch/arm/boot/dts/tegra124-nyan.dtsi        | 1 +
 arch/arm/boot/dts/tegra124-venice2.dts      | 2 +-
 4 files changed, 4 insertions(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +1 -0
index cde9ae8fa04b..b9198f842a34 100644
@@ -1885,6 +1885,7 @@ ports {
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
arch/arm/boot/dts/tegra124-apalis.dtsi +1 -0
index a46d9ba9bb7a..1a996fb78ee2 100644
@@ -1877,6 +1877,7 @@ ports {
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -0
index 63a81270300a..93a40a84b792 100644
@@ -466,6 +466,7 @@ usb2-0 {
 				vbus-supply = <&vdd_usb1_vbus>;
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 			};
 
 			usb2-1 {
arch/arm/boot/dts/tegra124-venice2.dts +1 -1
index e6b54ac1ebd1..de8c18e6b7e6 100644
@@ -972,7 +972,7 @@ ports {
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
+				usb-role-switch;
 				vbus-supply = <&vdd_usb1_vbus>;
 			};
 
Signature · 1 line
2.33.1
#25 lore raw

PATCH v5 16/24 ARM: tegra: Enable HDMI CEC on Nyan

In reply to Dmitry Osipenko

Enable HDMI CEC on Nyan Chromebooks. It allows to control TV over HDMI.

---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/boot/dts/tegra124-nyan.dtsi +4 -0
index 93a40a84b792..a5dff226831b 100644
@@ -390,6 +390,10 @@ pmc@7000e400 {
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	hda@70030000 {
 		status = "okay";
 	};
Signature · 1 line
2.33.1
#26 lore raw

PATCH v5 17/24 ARM: tegra: Enable CPU DFLL on Nyan

In reply to Dmitry Osipenko

Enable CPU DFLL node on Nyan Chromebooks. DFLL was previously disabled due to Linux kernel CPUFreq driver which didn't support suspend-resume. That problem was fixed years ago, but DFLL was never re-enabled.

---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -1
index a5dff226831b..ec01a23d4d47 100644
@@ -532,7 +532,7 @@ mmc@700b0600 { /* eMMC on this bus */
 
 	/* CPU DFLL clock */
 	clock@70110000 {
-		status = "disabled";
+		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
Signature · 1 line
2.33.1
#27 lore raw

PATCH v5 18/24 ARM: tegra: Add CPU thermal zones to Nyan device-tree

In reply to Dmitry Osipenko

CPU of Nyan Chromebooks is overheating badly because apparently hardware soctherm controller doesn't work well. Add CPU thermal zones to enable software thermal control over CPU and fix the overheat trouble.

---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 49 +++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)
arch/arm/boot/dts/tegra124-nyan.dtsi +48 -1
index ec01a23d4d47..b16cce7476ef 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra124.dtsi"
 
 / {
@@ -87,7 +88,7 @@ acodec: audio-codec@10 {
 			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 
-		temperature-sensor@4c {
+		tmp451: temperature-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
@@ -789,6 +790,52 @@ gpio-restart {
 		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
+
+	cpus {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tmp451 0>;
+
+			trips {
+				cpu_passive_trip: cpu-alert0 {
+					/* throttle at 70C until temperature drops to 69.8C */
+					temperature = <70000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
 
 #include "cros-ec-keyboard.dtsi"
Signature · 1 line
2.33.1
#28 lore raw

PATCH v5 19/24 ARM: tegra: Name clock and regulator nodes according to DT-schema

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

Name clocks and regulators according to DT-schema to fix warnings such as:

arch/arm/boot/dts/tegra20-acer-a500-picasso.dt.yaml: /: clock@0: 'anyOf' conditional failed, one must be fixed:
'reg' is a required property
'ranges' is a required property
From schema: /home/runner/.local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml

---
 arch/arm/boot/dts/tegra114-dalmore.dts        | 16 +++++------
 arch/arm/boot/dts/tegra114-roth.dts           | 14 +++++-----
 arch/arm/boot/dts/tegra114-tn7.dts            |  8 +++---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts     | 26 ++++++++---------
 arch/arm/boot/dts/tegra124-nyan.dtsi          | 28 +++++++++----------
 arch/arm/boot/dts/tegra124-venice2.dts        | 28 +++++++++----------
 .../boot/dts/tegra20-acer-a500-picasso.dts    | 12 ++++----
 arch/arm/boot/dts/tegra20-harmony.dts         | 16 +++++------
 arch/arm/boot/dts/tegra20-medcom-wide.dts     |  8 +++---
 arch/arm/boot/dts/tegra20-paz00.dts           |  6 ++--
 arch/arm/boot/dts/tegra20-plutux.dts          |  8 +++---
 arch/arm/boot/dts/tegra20-seaboard.dts        | 16 +++++------
 arch/arm/boot/dts/tegra20-tamonten.dtsi       |  4 +--
 arch/arm/boot/dts/tegra20-tec.dts             |  8 +++---
 arch/arm/boot/dts/tegra20-trimslice.dts       | 12 ++++----
 arch/arm/boot/dts/tegra20-ventana.dts         | 12 ++++----
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 10 +++----
 ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi |  4 +--
 .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi  |  2 +-
 arch/arm/boot/dts/tegra30-beaver.dts          | 20 ++++++-------
 arch/arm/boot/dts/tegra30-cardhu-a02.dts      | 12 ++++----
 arch/arm/boot/dts/tegra30-cardhu-a04.dts      | 14 +++++-----
 arch/arm/boot/dts/tegra30-cardhu.dtsi         | 28 +++++++++----------
 23 files changed, 156 insertions(+), 156 deletions(-)
arch/arm/boot/dts/tegra114-dalmore.dts +8 -8
index 7fd901f8d39a..d23050bfaba6 100644
@@ -1151,7 +1151,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1186,7 +1186,7 @@ volume_up {
 		};
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -1194,7 +1194,7 @@ vdd_ac_bat_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	dvdd_ts_reg: regulator@1 {
+	dvdd_ts_reg: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "dvdd_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1203,7 +1203,7 @@ dvdd_ts_reg: regulator@1 {
 		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@3 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1214,7 +1214,7 @@ usb1_vbus_reg: regulator@3 {
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	usb3_vbus_reg: regulator@4 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1225,7 +1225,7 @@ usb3_vbus_reg: regulator@4 {
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_hdmi_reg: regulator@5 {
+	vdd_hdmi_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_hdmi_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1233,7 +1233,7 @@ vdd_hdmi_reg: regulator@5 {
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_cam_1v8_reg: regulator@6 {
+	vdd_cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam_1v8_reg";
 		regulator-min-microvolt = <1800000>;
@@ -1242,7 +1242,7 @@ vdd_cam_1v8_reg: regulator@6 {
 		gpio = <&palmas_gpio 6 0>;
 	};
 
-	vdd_5v0_hdmi: regulator@7 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra114-roth.dts +7 -7
index 07960171fabe..18521707ff5b 100644
@@ -1016,7 +1016,7 @@ backlight: backlight {
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1045,7 +1045,7 @@ power {
 		};
 	};
 
-	lcd_bl_en: regulator@0 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_bl_en";
 		regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@ lcd_bl_en: regulator@0 {
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@1 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_lcd_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@ vdd_lcd: regulator@1 {
 		regulator-boot-on;
 	};
 
-	regulator@2 {
+	regulator-1v8ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@ regulator@2 {
 		regulator-boot-on;
 	};
 
-	regulator@3 {
+	regulator-3v3ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_ts";
 		regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@ regulator@3 {
 		regulator-boot-on;
 	};
 
-	regulator@4 {
+	regulator-1v8com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_com";
 		regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@ regulator@4 {
 		regulator-boot-on;
 	};
 
-	regulator@5 {
+	regulator-3v3com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_com";
 		regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra114-tn7.dts +4 -4
index 745d234b105b..0534247458f0 100644
@@ -273,7 +273,7 @@ backlight: backlight {
 		power-supply = <&lcd_bl_en>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -303,7 +303,7 @@ volume_up {
 	};
 
 	/* FIXME: output of BQ24192 */
-	vs_sys: regulator@0 {
+	vs_sys: regulator-vs {
 		compatible = "regulator-fixed";
 		regulator-name = "VS_SYS";
 		regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@ vs_sys: regulator@0 {
 		regulator-boot-on;
 	};
 
-	lcd_bl_en: regulator@1 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_LCD_BL";
 		regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@ lcd_bl_en: regulator@1 {
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@2 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "VD_LCD_1V8";
 		regulator-min-microvolt = <1800000>;
arch/arm/boot/dts/tegra124-jetson-tk1.dts +13 -13
index 35ab296408e1..094f94a627b2 100644
@@ -1868,7 +1868,7 @@ usb-phy@7d008000 {
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1892,7 +1892,7 @@ power {
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1901,7 +1901,7 @@ vdd_mux: regulator@0 {
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1911,7 +1911,7 @@ vdd_5v0_sys: regulator@1 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1921,7 +1921,7 @@ vdd_3v3_sys: regulator@2 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1933,7 +1933,7 @@ vdd_3v3_run: regulator@3 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1941,7 +1941,7 @@ vdd_3v3_hdmi: regulator@4 {
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_usb1_vbus: regulator@5 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+USB0_VBUS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1952,7 +1952,7 @@ vdd_usb1_vbus: regulator@5 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@6 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1963,7 +1963,7 @@ vdd_usb3_vbus: regulator@6 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_lp0: regulator@7 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1975,7 +1975,7 @@ vdd_3v3_lp0: regulator@7 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@8 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1984,7 +1984,7 @@ vdd_hdmi_pll: regulator@8 {
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@9 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1995,7 +1995,7 @@ vdd_5v0_hdmi: regulator@9 {
 	};
 
 	/* Molex power connector */
-	vdd_5v0_sata: regulator@10 {
+	vdd_5v0_sata: regulator-5v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SATA";
 		regulator-min-microvolt = <5000000>;
@@ -2005,7 +2005,7 @@ vdd_5v0_sata: regulator@10 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_12v0_sata: regulator@11 {
+	vdd_12v0_sata: regulator-12v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+12V_SATA";
 		regulator-min-microvolt = <12000000>;
arch/arm/boot/dts/tegra124-nyan.dtsi +14 -14
index b16cce7476ef..d62f57b392ec 100644
@@ -588,7 +588,7 @@ backlight: backlight {
 			 256>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -621,7 +621,7 @@ power {
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -630,7 +630,7 @@ vdd_mux: regulator@0 {
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -640,7 +640,7 @@ vdd_5v0_sys: regulator@1 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -650,7 +650,7 @@ vdd_3v3_sys: regulator@2 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -662,7 +662,7 @@ vdd_3v3_run: regulator@3 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -670,7 +670,7 @@ vdd_3v3_hdmi: regulator@4 {
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -678,7 +678,7 @@ vdd_led: regulator@5 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -689,7 +689,7 @@ vdd_5v0_ts: regulator@6 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -700,7 +700,7 @@ vdd_usb1_vbus: regulator@7 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -711,7 +711,7 @@ vdd_usb3_vbus: regulator@8 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -721,7 +721,7 @@ vdd_3v3_panel: regulator@9 {
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -736,7 +736,7 @@ vdd_3v3_lp0: regulator@10 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -745,7 +745,7 @@ vdd_hdmi_pll: regulator@11 {
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra124-venice2.dts +14 -14
index de8c18e6b7e6..2f2932be01c6 100644
@@ -1061,7 +1061,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1086,7 +1086,7 @@ panel: panel {
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1095,7 +1095,7 @@ vdd_mux: regulator@0 {
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1105,7 +1105,7 @@ vdd_5v0_sys: regulator@1 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1115,7 +1115,7 @@ vdd_3v3_sys: regulator@2 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1127,7 +1127,7 @@ vdd_3v3_run: regulator@3 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1135,7 +1135,7 @@ vdd_3v3_hdmi: regulator@4 {
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		regulator-min-microvolt = <3300000>;
@@ -1145,7 +1145,7 @@ vdd_led: regulator@5 {
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1156,7 +1156,7 @@ vdd_5v0_ts: regulator@6 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1167,7 +1167,7 @@ vdd_usb1_vbus: regulator@7 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -1178,7 +1178,7 @@ vdd_usb3_vbus: regulator@8 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -1188,7 +1188,7 @@ vdd_3v3_panel: regulator@9 {
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1203,7 +1203,7 @@ vdd_3v3_lp0: regulator@10 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1212,7 +1212,7 @@ vdd_hdmi_pll: regulator@11 {
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +6 -6
index 23d3f8daab23..2e6340e92fe1 100644
@@ -827,7 +827,7 @@ bat1010: battery-2s1p {
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k-in {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -839,7 +839,7 @@ clk32k_in: clock@0 {
 	 * oscillator is used as a reference clock-source by the
 	 * Azurewave WiFi/BT module.
 	 */
-	rtc_32k_wifi: clock@1 {
+	rtc_32k_wifi: clock-32k-wifi {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -964,7 +964,7 @@ lvds_encoder_output: endpoint {
 		};
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -972,7 +972,7 @@ vdd_5v0_sys: regulator@0 {
 		regulator-always-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_vs";
 		regulator-min-microvolt = <3300000>;
@@ -981,7 +981,7 @@ vdd_3v3_sys: regulator@1 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_1v8_sys: regulator@2 {
+	vdd_1v8_sys: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_vs";
 		regulator-min-microvolt = <1800000>;
@@ -990,7 +990,7 @@ vdd_1v8_sys: regulator@2 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@3 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-harmony.dts +8 -8
index ae4312eedcbd..a8494378c382 100644
@@ -640,7 +640,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -666,7 +666,7 @@ panel: panel {
 		backlight = <&backlight>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -674,7 +674,7 @@ vdd_5v0_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -682,7 +682,7 @@ regulator@1 {
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -691,7 +691,7 @@ regulator@2 {
 		enable-active-high;
 	};
 
-	pci_vdd_reg: regulator@3 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
@@ -700,7 +700,7 @@ pci_vdd_reg: regulator@3 {
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pn1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -709,7 +709,7 @@ vdd_pnl_reg: regulator@4 {
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -718,7 +718,7 @@ vdd_bl_reg: regulator@5 {
 		enable-active-high;
 	};
 
-	vdd_5v0_hdmi: regulator@6 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-medcom-wide.dts +4 -4
index b31c9bca16e6..cb6199d7d224 100644
@@ -92,7 +92,7 @@ sound {
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -100,7 +100,7 @@ vcc_24v_reg: regulator@100 {
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -109,7 +109,7 @@ vdd_5v0_reg: regulator@101 {
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -118,7 +118,7 @@ vdd_3v3_reg: regulator@102 {
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-paz00.dts +3 -3
index 5b38b0606f99..46d81d703548 100644
@@ -575,7 +575,7 @@ backlight: backlight {
 		default-brightness-level = <10>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -612,7 +612,7 @@ panel: panel {
 		backlight = <&backlight>;
 	};
 
-	p5valw_reg: regulator@0 {
+	p5valw_reg: regulator-5v0alw {
 		compatible = "regulator-fixed";
 		regulator-name = "+5valw";
 		regulator-min-microvolt = <5000000>;
@@ -620,7 +620,7 @@ p5valw_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	vdd_pnl_reg: regulator@1 {
+	vdd_pnl_reg: regulator-3v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3VS,vdd_pnl";
 		regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-plutux.dts +4 -4
index 5811b7006a9b..71a8236491df 100644
@@ -60,7 +60,7 @@ sound {
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@ vcc_24v_reg: regulator@100 {
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@ vdd_5v0_reg: regulator@101 {
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_3v3_reg: regulator@102 {
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-seaboard.dts +8 -8
index 92d494b8c3d2..ca7adeb1fdd9 100644
@@ -792,7 +792,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -828,7 +828,7 @@ panel: panel {
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -836,7 +836,7 @@ vdd_5v0_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -844,7 +844,7 @@ regulator@1 {
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -853,7 +853,7 @@ regulator@2 {
 		enable-active-high;
 	};
 
-	vbus_reg: regulator@3 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_vbus_wup1";
 		regulator-min-microvolt = <5000000>;
@@ -864,7 +864,7 @@ vbus_reg: regulator@3 {
 		regulator-boot-on;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -873,7 +873,7 @@ vdd_pnl_reg: regulator@4 {
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -882,7 +882,7 @@ vdd_bl_reg: regulator@5 {
 		enable-active-high;
 	};
 
-	vdd_hdmi: regulator@6 {
+	vdd_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-tamonten.dtsi +2 -2
index dd4d506683de..2ad56f84bb62 100644
@@ -502,13 +502,13 @@ mmc@c8000600 {
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
-	pci_vdd_reg: regulator@1 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-tec.dts +4 -4
index 10ff09d86efa..4f41c74384b2 100644
@@ -69,7 +69,7 @@ sound {
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@ vcc_24v_reg: regulator@100 {
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_5v0_reg: regulator@101 {
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@ vdd_3v3_reg: regulator@102 {
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-trimslice.dts +6 -6
index 4bc87bc0c2a4..1f4893699614 100644
@@ -379,7 +379,7 @@ mmc@c8000600 {
 		bus-width = <4>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -401,7 +401,7 @@ poweroff {
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	hdmi_vdd_reg: regulator@0 {
+	hdmi_vdd_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi";
 		regulator-min-microvolt = <3300000>;
@@ -409,7 +409,7 @@ hdmi_vdd_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	hdmi_pll_reg: regulator@1 {
+	hdmi_pll_reg: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi_pll";
 		regulator-min-microvolt = <1800000>;
@@ -417,7 +417,7 @@ hdmi_pll_reg: regulator@1 {
 		regulator-always-on;
 	};
 
-	vbus_reg: regulator@2 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -428,7 +428,7 @@ vbus_reg: regulator@2 {
 		regulator-boot-on;
 	};
 
-	pci_clk_reg: regulator@3 {
+	pci_clk_reg: regulator-pciclk {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_clk";
 		regulator-min-microvolt = <3300000>;
@@ -436,7 +436,7 @@ pci_clk_reg: regulator@3 {
 		regulator-always-on;
 	};
 
-	pci_vdd_reg: regulator@4 {
+	pci_vdd_reg: regulator-pcivdd {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_vdd";
 		regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-ventana.dts +6 -6
index 5a2578b3707f..4284054ebd2c 100644
@@ -606,7 +606,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -647,7 +647,7 @@ panel: panel {
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -655,7 +655,7 @@ vdd_5v0_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -663,7 +663,7 @@ regulator@1 {
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -672,7 +672,7 @@ regulator@2 {
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@3 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -681,7 +681,7 @@ vdd_pnl_reg: regulator@3 {
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@4 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +5 -5
index 07d4ea130964..e6aed19a5f3b 100644
@@ -1069,7 +1069,7 @@ battery_cell: battery-cell {
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1207,7 +1207,7 @@ lvds_encoder_output: endpoint {
 		};
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1216,7 +1216,7 @@ vdd_5v0_sys: regulator@0 {
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -1226,7 +1226,7 @@ vdd_3v3_sys: regulator@1 {
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@2 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
@@ -1237,7 +1237,7 @@ vdd_pnl: regulator@2 {
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vcc_3v3_ts: regulator@3 {
+	vcc_3v3_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "ldo_s-1167_3v3";
 		regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +2 -2
index 53966fa4eef2..cd28e8782f7d 100644
@@ -166,12 +166,12 @@ ldo8 {
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	regulator@4 {
+	regulator-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_usb";
 		regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +1 -1
index 9365ae607239..ee4a3f482769 100644
@@ -143,7 +143,7 @@ vdd_core: core-regulator@60 {
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
arch/arm/boot/dts/tegra30-beaver.dts +10 -10
index e159feeedef7..2ec5e47d9623 100644
@@ -1966,7 +1966,7 @@ usb-phy@7d008000 {
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1985,7 +1985,7 @@ gpled2 {
 		};
 	};
 
-	vdd_5v_in_reg: regulator@0 {
+	vdd_5v_in_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_in";
 		regulator-min-microvolt = <5000000>;
@@ -1993,7 +1993,7 @@ vdd_5v_in_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	chargepump_5v_reg: regulator@1 {
+	chargepump_5v_reg: regulator-chargepump {
 		compatible = "regulator-fixed";
 		regulator-name = "chargepump_5v";
 		regulator-min-microvolt = <5000000>;
@@ -2004,7 +2004,7 @@ chargepump_5v_reg: regulator@1 {
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	ddr_reg: regulator@2 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -2016,7 +2016,7 @@ ddr_reg: regulator@2 {
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	vdd_5v_sata_reg: regulator@3 {
+	vdd_5v_sata_reg: regulator-sata {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_sata";
 		regulator-min-microvolt = <5000000>;
@@ -2028,7 +2028,7 @@ vdd_5v_sata_reg: regulator@3 {
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb1_vbus_reg: regulator@4 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2039,7 +2039,7 @@ usb1_vbus_reg: regulator@4 {
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb3_vbus_reg: regulator@5 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2050,7 +2050,7 @@ usb3_vbus_reg: regulator@5 {
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_reg: regulator@6 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3,vdd_3v3_alw";
 		regulator-min-microvolt = <3300000>;
@@ -2062,7 +2062,7 @@ sys_3v3_reg: regulator@6 {
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_pexs_reg: regulator@7 {
+	sys_3v3_pexs_reg: regulator-pexs {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3_pexs";
 		regulator-min-microvolt = <3300000>;
@@ -2074,7 +2074,7 @@ sys_3v3_pexs_reg: regulator@7 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_5v0_hdmi: regulator@8 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_5V_HDMI";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a02.dts +6 -6
index 4899e05a0d9c..247185314f46 100644
@@ -16,7 +16,7 @@ mmc@78000400 {
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 {
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 {
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 {
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 {
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 {
 		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a04.dts +7 -7
index a11028b8b67b..2911f08863a0 100644
@@ -16,7 +16,7 @@ mmc@78000400 {
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 {
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 {
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 {
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 {
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 {
 		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@ vdd_bl_reg: regulator@105 {
 		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl2_reg: regulator@106 {
+	vdd_bl2_reg: regulator-bl2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl2";
 		regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu.dtsi +14 -14
index 448f1397e64a..d2f6121049a4 100644
@@ -433,7 +433,7 @@ backlight: backlight {
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -475,7 +475,7 @@ panel: panel {
 		backlight = <&backlight>;
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -483,7 +483,7 @@ vdd_ac_bat_reg: regulator@0 {
 		regulator-always-on;
 	};
 
-	cam_1v8_reg: regulator@1 {
+	cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "cam_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -493,7 +493,7 @@ cam_1v8_reg: regulator@1 {
 		vin-supply = <&vio_reg>;
 	};
 
-	cp_5v_reg: regulator@2 {
+	cp_5v_reg: regulator-5v0cp {
 		compatible = "regulator-fixed";
 		regulator-name = "cp_5v";
 		regulator-min-microvolt = <5000000>;
@@ -504,7 +504,7 @@ cp_5v_reg: regulator@2 {
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	emmc_3v3_reg: regulator@3 {
+	emmc_3v3_reg: regulator-emmc {
 		compatible = "regulator-fixed";
 		regulator-name = "emmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -516,7 +516,7 @@ emmc_3v3_reg: regulator@3 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	modem_3v3_reg: regulator@4 {
+	modem_3v3_reg: regulator-modem {
 		compatible = "regulator-fixed";
 		regulator-name = "modem_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -525,7 +525,7 @@ modem_3v3_reg: regulator@4 {
 		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 	};
 
-	pex_hvdd_3v3_reg: regulator@5 {
+	pex_hvdd_3v3_reg: regulator-pex {
 		compatible = "regulator-fixed";
 		regulator-name = "pex_hvdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -535,7 +535,7 @@ pex_hvdd_3v3_reg: regulator@5 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam1_ldo_reg: regulator@6 {
+	vdd_cam1_ldo_reg: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam1_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -545,7 +545,7 @@ vdd_cam1_ldo_reg: regulator@6 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam2_ldo_reg: regulator@7 {
+	vdd_cam2_ldo_reg: regulator-cam2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam2_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -555,7 +555,7 @@ vdd_cam2_ldo_reg: regulator@7 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam3_ldo_reg: regulator@8 {
+	vdd_cam3_ldo_reg: regulator-cam3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam3_ldo";
 		regulator-min-microvolt = <3300000>;
@@ -565,7 +565,7 @@ vdd_cam3_ldo_reg: regulator@8 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_com_reg: regulator@9 {
+	vdd_com_reg: regulator-com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_com";
 		regulator-min-microvolt = <3300000>;
@@ -577,7 +577,7 @@ vdd_com_reg: regulator@9 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: regulator@10 {
+	vdd_fuse_3v3_reg: regulator-fuse {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -587,7 +587,7 @@ vdd_fuse_3v3_reg: regulator@10 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_pnl1_reg: regulator@11 {
+	vdd_pnl1_reg: regulator-pnl1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl1";
 		regulator-min-microvolt = <3300000>;
@@ -599,7 +599,7 @@ vdd_pnl1_reg: regulator@11 {
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_vid_reg: regulator@12 {
+	vdd_vid_reg: regulator-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
Signature · 1 line
2.33.1
#29 lore raw

PATCH v5 20/24 ARM: tegra: nexus7: Drop clock-frequency from NFC node

In reply to Dmitry Osipenko

From: David Heidelberg <[email protected]>

The clock-frequency property was never used and is deprecated now. Remove it from Nexus 7 device-tree.

---
 arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 -
 arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 --
 2 files changed, 3 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi +0 -1
index a044dbd200a9..564cfcde21a9 100644
@@ -137,7 +137,6 @@ i2c@7000c500 {
 		nfc@28 {
 			compatible = "nxp,pn544-i2c";
 			reg = <0x28>;
-			clock-frequency = <100000>;
 
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +0 -2
index a681ad51fddd..cd63e0ef7445 100644
@@ -223,8 +223,6 @@ nfc@2a {
 			compatible = "nxp,pn544-i2c";
 			reg = <0x2a>;
 
-			clock-frequency = <100000>;
-
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
Signature · 1 line
2.33.1
#30 lore raw

PATCH v5 21/24 ARM: tegra: nexus7: Use common LVDS display device-tree

In reply to Dmitry Osipenko

From: Maxim Schwalm <[email protected]>

Make Nexus 7 device-tree to use common LVDS bridge description. This makes device-trees more consistent.

[[email protected]: factored Nexus7 change into separate patch and wrote commit message]
---
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 54 ++-----------------
 1 file changed, 3 insertions(+), 51 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +3 -51
index e6aed19a5f3b..861ac96bd806 100644
@@ -8,6 +8,7 @@
 #include "tegra30.dtsi"
 #include "tegra30-cpu-opp.dtsi"
 #include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
 
 / {
 	aliases {
@@ -59,21 +60,6 @@ trustzone@bfe00000 {
 		};
 	};
 
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port@0 {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <24>;
-					};
-				};
-			};
-		};
-	};
-
 	gpio@6000d000 {
 		init-mode-hog {
 			gpio-hog;
@@ -1114,20 +1100,14 @@ display-panel {
 		 */
 		compatible = "panel-lvds";
 
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
 		width-mm = <94>;
 		height-mm = <150>;
 		rotation = <180>;
 
 		data-mapping = "jeida-24";
 
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
+		/* DDC unconnected on Nexus 7 */
+		/delete-property/ ddc-i2c-bus;
 	};
 
 	firmware {
@@ -1179,34 +1159,6 @@ volume-down {
 		};
 	};
 
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
 	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
Signature · 1 line
2.33.1
#31 lore raw

PATCH v5 22/24 ARM: tegra: Enable video decoder on Tegra114

In reply to Dmitry Osipenko

From: Anton Bambura <[email protected]>

Add Video Decoder Engine node to Tegra114 device-tree.

---
 arch/arm/boot/dts/tegra114.dtsi | 38 +++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
arch/arm/boot/dts/tegra114.dtsi +38 -0
index 563ee262f41d..3d08764401ce 100644
@@ -17,6 +17,19 @@ memory@80000000 {
 		reg = <0x80000000 0x0>;
 	};
 
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
@@ -253,6 +266,30 @@ gpio: gpio@6000d000 {
 		*/
 	};
 
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
+	};
+
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x70000800 0x64>, /* Chip revision */
@@ -543,6 +580,7 @@ mc: memory-controller@70019000 {
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
 		#iommu-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	ahub@70080000 {
Signature · 1 line
2.33.1
#32 lore raw

PATCH v5 23/24 ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets

In reply to Dmitry Osipenko

Enable charger and touchpad drivers found on Acer Tegra124 (Nyan) Chromebooks, display bridge found on ASUS TF700T and audio codecs found on ASUS tablets.

---
 arch/arm/configs/tegra_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/configs/tegra_defconfig +6 -0
index 8a8f12b3e6dd..25bfbf11420a 100644
@@ -112,6 +112,8 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_KEYBOARD_CAP11XX=y
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_ELAN_I2C_SMBUS=y
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
@@ -131,6 +133,7 @@ CONFIG_SERIAL_DEV_BUS=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
@@ -152,6 +155,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_SBS=y
+CONFIG_CHARGER_BQ24735=y
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_CHARGER_GPIO=y
 CONFIG_CHARGER_SMB347=y
@@ -200,7 +204,9 @@ CONFIG_DRM_TEGRA_STAGING=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
 CONFIG_DRM_LVDS_CODEC=y
+CONFIG_DRM_TOSHIBA_TC358768=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
Signature · 1 line
2.33.1
#33 lore raw

PATCH v5 24/24 ARM: config: multi v7: Enable display drivers used by Tegra devices

In reply to Dmitry Osipenko

Enable display-related drivers used by various Tegra-based tablets.

---
 arch/arm/configs/multi_v7_defconfig | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/configs/multi_v7_defconfig +5 -0
index c951aeed2138..3d509bc13444 100644
@@ -382,6 +382,7 @@ CONFIG_TCG_TPM=m
 CONFIG_TCG_TIS_I2C_INFINEON=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=m
+CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -680,19 +681,23 @@ CONFIG_DRM_FSL_DCU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_STM=m
 CONFIG_DRM_STM_DSI=m
+CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
+CONFIG_DRM_LVDS_CODEC=m
 CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SII9234=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TOSHIBA_TC358764=m
+CONFIG_DRM_TOSHIBA_TC358768=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_STI=m
Signature · 1 line
2.33.1