Skip to contentSkip to conversation

ARM: tegra: Rename GPU node on Tegra124

PATCH New Thierry Reding 1 participant 1 message Dec 7, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: tegra: Rename GPU node on Tegra124

From: Thierry Reding <[email protected]>

In order to be able to pass DT schema validation, change the GPU nodes' unit-address to the standard notation. Previously this was using a "0," prefix that originated from a time when the top-level device tree node contained #address-cells = <2>.

Note that this technically breaks backwards-compatibility with certain older versions of the U-Boot bootloader because early versions used a hard-coded DT path lookup to find the GPU node and perform some fixups on it. However, this was changed to a compatible string based lookup in April 2016, so it's reasonable to expect people to update U-Boot on the systems that they want to use this updated kernel DTB with.

---
 arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +-
 arch/arm/boot/dts/tegra124-apalis.dtsi      | 2 +-
 arch/arm/boot/dts/tegra124-jetson-tk1.dts   | 2 +-
 arch/arm/boot/dts/tegra124-nyan.dtsi        | 2 +-
 arch/arm/boot/dts/tegra124-venice2.dts      | 2 +-
 arch/arm/boot/dts/tegra124.dtsi             | 7 +------
 6 files changed, 6 insertions(+), 11 deletions(-)
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +1 -1
index 4ba4d5229fcf..f00ef4d08fd4 100644
@@ -57,7 +57,7 @@ hdmi@54280000 {
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
arch/arm/boot/dts/tegra124-apalis.dtsi +1 -1
index 3760744cc1b0..e6d25813b416 100644
@@ -56,7 +56,7 @@ hdmi@54280000 {
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
arch/arm/boot/dts/tegra124-jetson-tk1.dts +1 -1
index 95b97c1fa1fb..e056e737abdf 100644
@@ -72,7 +72,7 @@ cec@70015000 {
 		status = "okay";
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -1
index 1350a0b9a606..b2e7ede8017a 100644
@@ -61,7 +61,7 @@ dpaux@545c0000 {
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		status = "okay";
 
 		vdd-supply = <&vdd_gpu>;
arch/arm/boot/dts/tegra124-venice2.dts +1 -1
index 4698c6db6f76..0a9aaa7bf066 100644
@@ -51,7 +51,7 @@ dpaux@545c0000 {
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
arch/arm/boot/dts/tegra124.dtsi +1 -6
index f4ac0c327c2e..d0ec1a30ff54 100644
@@ -223,12 +223,7 @@ gic: interrupt-controller@50041000 {
 		interrupt-parent = <&gic>;
 	};
 
-	/*
-	 * Please keep the following 0, notation in place as a former mainline
-	 * U-Boot version was looking for that particular notation in order to
-	 * perform required fix-ups on that GPU node.
-	 */
-	gpu@0,57000000 {
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
Signature · 1 line
2.33.1