ARM: tegra: Rename GPU node on Tegra124
Subsystems (2)
PATCH 1/1 ARM: tegra: Rename GPU node on Tegra124
From: Thierry Reding <[email protected]>
In order to be able to pass DT schema validation, change the GPU nodes' unit-address to the standard notation. Previously this was using a "0," prefix that originated from a time when the top-level device tree node contained #address-cells = <2>.
Note that this technically breaks backwards-compatibility with certain older versions of the U-Boot bootloader because early versions used a hard-coded DT path lookup to find the GPU node and perform some fixups on it. However, this was changed to a compatible string based lookup in April 2016, so it's reasonable to expect people to update U-Boot on the systems that they want to use this updated kernel DTB with.
--- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +- arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- arch/arm/boot/dts/tegra124-venice2.dts | 2 +- arch/arm/boot/dts/tegra124.dtsi | 7 +------ 6 files changed, 6 insertions(+), 11 deletions(-)
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +1 -1
@@ -57,7 +57,7 @@ hdmi@54280000 { }; }; - gpu@0,57000000 { + gpu@57000000 { /* * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up
arch/arm/boot/dts/tegra124-apalis.dtsi +1 -1
@@ -56,7 +56,7 @@ hdmi@54280000 { }; }; - gpu@0,57000000 { + gpu@57000000 { /* * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up
arch/arm/boot/dts/tegra124-jetson-tk1.dts +1 -1
@@ -72,7 +72,7 @@ cec@70015000 { status = "okay"; }; - gpu@0,57000000 { + gpu@57000000 { /* * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up
arch/arm/boot/dts/tegra124-nyan.dtsi +1 -1
@@ -61,7 +61,7 @@ dpaux@545c0000 { }; }; - gpu@0,57000000 { + gpu@57000000 { status = "okay"; vdd-supply = <&vdd_gpu>;
arch/arm/boot/dts/tegra124-venice2.dts +1 -1
@@ -51,7 +51,7 @@ dpaux@545c0000 { }; }; - gpu@0,57000000 { + gpu@57000000 { /* * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up
arch/arm/boot/dts/tegra124.dtsi +1 -6
@@ -223,12 +223,7 @@ gic: interrupt-controller@50041000 { interrupt-parent = <&gic>; }; - /* - * Please keep the following 0, notation in place as a former mainline - * U-Boot version was looking for that particular notation in order to - * perform required fix-ups on that GPU node. - */ - gpu@0,57000000 { + gpu@57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, <0x0 0x58000000 0x0 0x01000000>;
Signature · 1 line
2.33.1