Skip to contentSkip to conversation

Add kernel seccomp support for m68k

PATCH Superseded Michael Schmitz 1 participant 4 messages Jan 25, 2022

Subsystems (4)

v9 of 13 Superseded Latest is v13 →

lore
Share & tools
lore
#0 lore raw

v9 cover Add kernel seccomp support for m68k

Respin of m68k kernel seccomp support, again.

Patch 1 adjusted to match Eric's patch now gone into v5.17-rc1, rest of the series remains unchanged from v8.

Tested on 030, no regressions with VM stress tests.

Cheers,

Michael

#1 lore raw

PATCH v9 1/3 m68k/kernel - wire up syscall_trace_enter/leave for m68k

m68k (other than Coldfire) uses syscall_trace for both trace entry and trace exit. Seccomp support requires separate entry points for trace entry and exit which are already provided for Coldfire.

Replace syscall_trace by syscall_trace_enter and syscall_trace_leave in preparation for seccomp support.

No regression seen in testing with strace on ARAnyM.

--
Changes from v8:

- adapt ptrace.c patch to recent changes by Eric Biederman

Changes from v7:

Al Viro:
- split first patch to separate the switch to syscall_trace_enter/leave() from return code checks

Changes from v6:

Geert Uytterhoeven:
- add syscall_trace_enter() return code check for 68000 and coldfire

Changes from v5:

- add comment to explain optimization

Changes from v4:

Andreas Schwab:
- optimize return code test (addql #1,%d0 for cmpil #-1,%d0)
- spelling fix in commit message

Changes from v3:

- change syscall_trace_enter return code test from !=0 to ==-1

revert syscall trace return code checks

---
 arch/m68k/kernel/entry.S  | 4 ++--
 arch/m68k/kernel/ptrace.c | 7 -------
 2 files changed, 2 insertions(+), 9 deletions(-)
arch/m68k/kernel/entry.S +2 -2
index 9434fca68de5..18f278bdbd21 100644
@@ -181,7 +181,7 @@ do_trace_entry:
 	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
@@ -194,7 +194,7 @@ badsys:
 do_trace_exit:
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
+	jbsr	syscall_trace_leave
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
 	jra	.Lret_from_exception
arch/m68k/kernel/ptrace.c +0 -7
index aa3a0b8d07e9..74d58a82a135 100644
@@ -271,12 +271,6 @@ long arch_ptrace(struct task_struct *child, long request,
 	return -EIO;
 }
 
-asmlinkage void syscall_trace(void)
-{
-	ptrace_report_syscall(0);
-}
-
-#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;
@@ -291,4 +285,3 @@ asmlinkage void syscall_trace_leave(void)
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(task_pt_regs(current), 0);
 }
-#endif /* CONFIG_COLDFIRE */
Signature · 1 line
2.17.1
#2 lore raw

PATCH v9 2/3 m68k/kernel - check syscall_trace_enter() return code on m68k

In reply to Michael Schmitz

Check return code of syscall_trace_enter(), and skip syscall if -1. Return code will be left at what had been set by ptrace or seccomp (in regs->d0).

No regression seen in testing with strace on ARAnyM.

--
Changes from v7:

Al Viro:
- split return code checks from switch to syscall_trace_enter()

Changes from v6:

Geert Uytterhoeven:
- add syscall_trace_enter() return code check for 68000 and coldfire

Changes from v5:

- add comment to explain optimization

Changes from v4:

Andreas Schwab:
- optimize return code test (addql #1,%d0 for cmpil #-1,%d0)
- spelling fix in commit message

Changes from v3:

- change syscall_trace_enter return code test from !=0 to ==-1

---
 arch/m68k/68000/entry.S    | 2 ++
 arch/m68k/coldfire/entry.S | 2 ++
 arch/m68k/kernel/entry.S   | 2 ++
 3 files changed, 6 insertions(+)
arch/m68k/68000/entry.S +2 -0
index 997b54933015..7d63e2f1555a 100644
@@ -45,6 +45,8 @@ do_trace:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%sp@(PT_OFF_ORIG_D0),%d1
 	movel	#-ENOSYS,%d0
 	cmpl	#NR_syscalls,%d1
arch/m68k/coldfire/entry.S +2 -0
index 9f337c70243a..35104c5417ff 100644
@@ -90,6 +90,8 @@ ENTRY(system_call)
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0
+	jeq	ret_from_exception
 	movel	%d3,%a0
 	jbsr	%a0@
 	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
arch/m68k/kernel/entry.S +2 -0
index 18f278bdbd21..0d5b7085d76f 100644
@@ -184,6 +184,8 @@ do_trace_entry:
 	jbsr	syscall_trace_enter
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
+	addql	#1,%d0			| optimization for cmpil #-1,%d0
+	jeq	ret_from_syscall
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
Signature · 1 line
2.17.1
#3 lore raw

PATCH v9 3/3 m68k: add kernel seccomp support

In reply to Michael Schmitz

Add secure_computing() call to syscall_trace_enter to actually filter system calls.

Add necessary arch Kconfig options, define TIF_SECCOMP trace flag and provide basic seccomp filter support in asm/syscall.h

syscall_get_nr currently uses the syscall nr stored in orig_d0 because we change d0 to a default return code before starting a syscall trace. This may be inconsistent with syscall_rollback copying orig_d0 to d0 (which we never check upon return from trace). We use d0 for the return code from syscall_trace_enter in entry.S currently, and could perhaps expand that to store a new syscall number returned by the seccomp filter before executing the syscall. This clearly needs some discussion.

No regressions in seccomp_bpf self test on ARAnyM.

--
Changes from v6:

Geert Uytterhoeven:
- add syscall_get_error(), syscall_get_return_value(), and syscall_set_arguments() (not needed to compile!)

Changes from v5:

Geert Uytterhoeven:
- correct wrong offset for d1-d5 register copy
- update Documentation/features/seccomp/seccomp-filter/arch-support.txt

add syscall_get_error(), syscall_get_return_value(), syscall_set_arguments()

---
 .../seccomp/seccomp-filter/arch-support.txt   |  2 +-
 arch/m68k/Kconfig                             |  2 +
 arch/m68k/include/asm/seccomp.h               | 11 ++++
 arch/m68k/include/asm/syscall.h               | 56 +++++++++++++++++++
 arch/m68k/include/asm/thread_info.h           |  2 +
 arch/m68k/kernel/ptrace.c                     |  5 ++
 6 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68k/include/asm/seccomp.h
Documentation/features/seccomp/seccomp-filter/arch-support.txt +1 -1
index 26eec58ab819..be71f2066981 100644
@@ -14,7 +14,7 @@
     |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
-    |        m68k: | TODO |
+    |        m68k: |  ok  |
     |  microblaze: | TODO |
     |        mips: |  ok  |
     |       nds32: | TODO |
arch/m68k/Kconfig +2 -0
index 936e1803c7c7..c0ef187fb3ed 100644
@@ -18,6 +18,8 @@ config M68K
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_SHOW
 	select HAVE_AOUT if MMU
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED
arch/m68k/include/asm/seccomp.h new file +11 -0
new file mode 100644
index 000000000000..de8a94e1fb3f
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
+
+#include <asm-generic/seccomp.h>
+
+#define SECCOMP_ARCH_NATIVE		AUDIT_ARCH_M68K
+#define SECCOMP_ARCH_NATIVE_NR		NR_syscalls
+#define SECCOMP_ARCH_NATIVE_NAME	"m68k"
+
+#endif /* _ASM_SECCOMP_H */
arch/m68k/include/asm/syscall.h +56 -0

62 lines not on this page · raw message

arch/m68k/include/asm/thread_info.h +2 -0
index c952658ba792..31be2ad999ca 100644
@@ -61,6 +61,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_SIGPENDING		6	/* signal pending */
 #define TIF_NEED_RESCHED	7	/* rescheduling necessary */
+#define TIF_SECCOMP		13	/* seccomp syscall filtering active */
 #define TIF_DELAYED_TRACE	14	/* single step a syscall */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
 #define TIF_MEMDIE		16	/* is terminating due to OOM killer */
@@ -69,6 +70,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_DELAYED_TRACE	(1 << TIF_DELAYED_TRACE)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
arch/m68k/kernel/ptrace.c +5 -0
index 74d58a82a135..bc2490c3fb52 100644
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/signal.h>
+#include <linux/seccomp.h>
 #include <linux/tracehook.h>
 
 #include <linux/uaccess.h>
@@ -277,6 +278,10 @@ asmlinkage int syscall_trace_enter(void)
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		ret = tracehook_report_syscall_entry(task_pt_regs(current));
+
+	if (secure_computing() == -1)
+		return -1;
+
 	return ret;
 }
 
Signature · 1 line
2.17.1