doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
PATCH 1/3 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.
--- doc/board/nxp/imx8mm_evk.rst | 1 - 1 file changed, 1 deletion(-)
doc/board/nxp/imx8mm_evk.rst +0 -1
@@ -42,7 +42,6 @@ Build U-Boot $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to MicroSD card offset 33KB:
Signature · 1 line
2.25.1
PATCH 2/3 doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.
--- doc/board/kontron/sl-mx8mm.rst | 1 - 1 file changed, 1 deletion(-)
doc/board/kontron/sl-mx8mm.rst +0 -1
@@ -62,7 +62,6 @@ Build U-Boot .. code-block:: bash $ make kontron-sl-mx8mm_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to SD card at an offset of 33 KiB:
Signature · 1 line
2.25.1
Re: [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
Quoted 7 lines · Fabio Estevam
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.Remove the step that performs the
ATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>
Quoted 19 lines
--- doc/board/kontron/sl-mx8mm.rst | 1 - 1 file changed, 1 deletion(-)doc/board/kontron/sl-mx8mm.rst +0
-1@@ -62,7 +62,6 @@ Build U-Boot .. code-block:: bash $ make kontron-sl-mx8mm_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to SD card at an offset of 33 KiB:Signature · 1 line
2.25.1
PATCH 2/3 doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
In reply to Fabio EstevamQuoted 6 lines
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs theATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Patrick Wildt <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH 3/3 doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
In reply to Fabio Estevamimx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.
--- doc/board/toradex/verdin-imx8mm.rst | 1 - 1 file changed, 1 deletion(-)
doc/board/toradex/verdin-imx8mm.rst +0 -1
@@ -44,7 +44,6 @@ Build U-Boot .. code-block:: bash $ export CROSS_COMPILE=aarch64-linux-gnu- - $ export ATF_LOAD_ADDR=0x920000 $ make verdin-imx8mm_defconfig $ make
Signature · 1 line
2.25.1
Re: [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
Quoted 7 lines · Fabio Estevam
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.Remove the step that performs the
ATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>
Quoted 19 lines
--- doc/board/toradex/verdin-imx8mm.rst | 1 - 1 file changed, 1 deletion(-)doc/board/toradex/verdin-imx8mm.rst +0
-1@@ -44,7 +44,6 @@ Build U-Boot .. code-block:: bash $ export CROSS_COMPILE=aarch64-linux-gnu- - $ export ATF_LOAD_ADDR=0x920000 $ make verdin-imx8mm_defconfig $ makeSignature · 1 line
2.25.1
PATCH 3/3 doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
In reply to Fabio EstevamQuoted 6 lines
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs theATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Patrick Wildt <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Quoted 7 lines · Fabio Estevam
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.Remove the step that performs the
ATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>
Quoted 19 lines
--- doc/board/nxp/imx8mm_evk.rst | 1 - 1 file changed, 1 deletion(-)doc/board/nxp/imx8mm_evk.rst +0
-1@@ -42,7 +42,6 @@ Build U-Boot $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to MicroSD card offset 33KB:Signature · 1 line
2.25.1
PATCH 1/3 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
In reply to Fabio EstevamQuoted 6 lines
imx8mm-u-boot.dtsipasses the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs theATF_LOAD_ADDRexport, which is now unneeded.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Patrick Wildt <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================