Skip to contentSkip to conversation

doc: imx8mm_evk: Remove ATF_LOAD_ADDR export

PATCH In review Fabio Estevam 3 participants 9 messages Jan 12, 2022 – Feb 5, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

---
 doc/board/nxp/imx8mm_evk.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/nxp/imx8mm_evk.rst +0 -1
index b377c4de276d..b9e67b954fc2 100644
@@ -42,7 +42,6 @@ Build U-Boot
 
    $ export CROSS_COMPILE=aarch64-poky-linux-
    $ make imx8mm_evk_defconfig
-   $ export ATF_LOAD_ADDR=0x920000
    $ make
 
 Burn the flash.bin to MicroSD card offset 33KB:
Signature · 1 line
2.25.1
#1 lore raw

PATCH 2/3 doc: sl-mx8mm: Remove ATF_LOAD_ADDR export

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

---
 doc/board/kontron/sl-mx8mm.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/kontron/sl-mx8mm.rst +0 -1
index 74ff228f2038..7a4c1134b54d 100644
@@ -62,7 +62,6 @@ Build U-Boot
 .. code-block:: bash
 
    $ make kontron-sl-mx8mm_defconfig
-   $ export ATF_LOAD_ADDR=0x920000
    $ make
 
 Burn the flash.bin to SD card at an offset of 33 KiB:
Signature · 1 line
2.25.1
Reviewed-by on v1 2/3
#2 lore raw

Re: [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export

Quoted 7 lines · Fabio Estevam

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Quoted 19 lines
---
 doc/board/kontron/sl-mx8mm.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/kontron/sl-mx8mm.rst +0 -1
index 74ff228f2038..7a4c1134b54d 100644
@@ -62,7 +62,6 @@ Build U-Boot
 .. code-block:: bash
 
    $ make kontron-sl-mx8mm_defconfig
-   $ export ATF_LOAD_ADDR=0x920000
    $ make
 
 Burn the flash.bin to SD card at an offset of 33 KiB:
Signature · 1 line
2.25.1
#3 lore raw

PATCH 2/3 doc: sl-mx8mm: Remove ATF_LOAD_ADDR export

In reply to Fabio Estevam
Quoted 6 lines

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#4 lore raw

PATCH 3/3 doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export

In reply to Fabio Estevam

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

---
 doc/board/toradex/verdin-imx8mm.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/toradex/verdin-imx8mm.rst +0 -1
index a11c82da2f5c..439128adceba 100644
@@ -44,7 +44,6 @@ Build U-Boot
 .. code-block:: bash
 
     $ export CROSS_COMPILE=aarch64-linux-gnu-
-    $ export ATF_LOAD_ADDR=0x920000
     $ make verdin-imx8mm_defconfig
     $ make
 
Signature · 1 line
2.25.1
Reviewed-by on v1 3/3
#5 lore raw

Re: [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export

Quoted 7 lines · Fabio Estevam

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Quoted 19 lines
---
 doc/board/toradex/verdin-imx8mm.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/toradex/verdin-imx8mm.rst +0 -1
index a11c82da2f5c..439128adceba 100644
@@ -44,7 +44,6 @@ Build U-Boot
 .. code-block:: bash
 
     $ export CROSS_COMPILE=aarch64-linux-gnu-
-    $ export ATF_LOAD_ADDR=0x920000
     $ make verdin-imx8mm_defconfig
     $ make
 
Signature · 1 line
2.25.1
#6 lore raw

PATCH 3/3 doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export

In reply to Fabio Estevam
Quoted 6 lines

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
Reviewed-by on v1 1/3
#7 lore raw
In reply to Fabio Estevam
Quoted 7 lines · Fabio Estevam

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Quoted 19 lines
---
 doc/board/nxp/imx8mm_evk.rst | 1 -
 1 file changed, 1 deletion(-)
doc/board/nxp/imx8mm_evk.rst +0 -1
index b377c4de276d..b9e67b954fc2 100644
@@ -42,7 +42,6 @@ Build U-Boot
 
    $ export CROSS_COMPILE=aarch64-poky-linux-
    $ make imx8mm_evk_defconfig
-   $ export ATF_LOAD_ADDR=0x920000
    $ make
 
 Burn the flash.bin to MicroSD card offset 33KB:
Signature · 1 line
2.25.1
#8 lore raw

PATCH 1/3 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export

In reply to Fabio Estevam
Quoted 6 lines

imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================