Skip to contentSkip to conversation

5.16.8-rc1 review

PATCH In review Greg Kroah-Hartman 3 participants 130 messages Feb 7, 2022 Stable branch

lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.16.8-rc1 review

This is the start of the stable review cycle for the 5.16.8 release. There are 126 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.16.8-rc1

Florian Westphal <[email protected]>
selftests: netfilter: check stateless nat udp checksum fixup

Florian Westphal <[email protected]>
selftests: nft_concat_range: add test for reload with no element add/del

Yang Li <[email protected]>
gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()

Yang Li <[email protected]>
gpio: idt3243x: Fix an ignored error return from platform_get_irq()

Arnaldo Carvalho de Melo <[email protected]>
tools include UAPI: Sync sound/asound.h copy with the kernel sources

Waiman Long <[email protected]>
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

Xin Yin <[email protected]>
ext4: fix incorrect type issue during replay_del_range

Ritesh Harjani <[email protected]>
ext4: fix error handling in ext4_fc_record_modified_inode()

Ritesh Harjani <[email protected]>
ext4: fix error handling in ext4_restore_inline_data()

Xin Yin <[email protected]>
ext4: modify the logic of ext4_mb_new_blocks_simple

Xin Yin <[email protected]>
ext4: prevent used blocks from being allocated during fast commit replay

Sergey Shtylyov <[email protected]>
EDAC/xgene: Fix deferred probing

Sergey Shtylyov <[email protected]>
EDAC/altera: Fix deferred probing

Peter Zijlstra <[email protected]>
x86/perf: Default set FREEZE_ON_SMI for all

Tristan Hume <[email protected]>
perf/x86/intel/pt: Fix crash with stop filters in single-range mode

Ian Rogers <[email protected]>
perf stat: Fix display of grouped aliased events

Marco Elver <[email protected]>
perf: Copy perf_event_attr::sig_data on modification

Mark Rutland <[email protected]>
kvm/arm64: rework guest entry logic

Sergei Trofimovich <[email protected]>
objtool: Fix truncated string warning

Riwen Lu <[email protected]>
rtc: cmos: Evaluate century appropriate

Sasha Neftin <[email protected]>
e1000e: Separate ADP board type from TGP

Nathan Chancellor <[email protected]>
tools/resolve_btfids: Do not print any commands when building silently

Muhammad Usama Anjum <[email protected]>
selftests: futex: Use variable MAKE instead of make

Muhammad Usama Anjum <[email protected]>
selftests/exec: Remove pipe from TEST_GEN_FILES

Hou Tao <[email protected]>
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

Haiyue Wang <[email protected]>
gve: fix the wrong AdminQ buffer queue index check

Dai Ngo <[email protected]>
nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

John Meneghini <[email protected]>
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

Tom Rix <[email protected]>
btrfs: fix use of uninitialized variable at rm device ioctl

Florian Fainelli <[email protected]>
pinctrl: bcm2835: Fix a few error paths

Łukasz Bartosik <[email protected]>
pinctrl: intel: fix unexpected interrupt

Andy Shevchenko <[email protected]>
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line

Andre Przywara <[email protected]>
pinctrl: sunxi: Fix H616 I2S3 pin data

Srinivas Kandagatla <[email protected]>
ASoC: qdsp6: q6apm-dai: only stop graphs that are started

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd938x: fix return value of mixer put function

Srinivas Kandagatla <[email protected]>
ASoC: codecs: lpass-rx-macro: fix sidetone register offsets

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd938x: fix incorrect used of portid

Dan Carpenter <[email protected]>
ASoC: max9759: fix underflow in speaker_gain_control_put()

Jiasheng Jiang <[email protected]>
ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

Robert Hancock <[email protected]>
ASoC: simple-card: fix probe failure on platform component

Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

Miaoqian Lin <[email protected]>
ASoC: fsl: Add missing error handling in pcm030_fabric_probe

Peter Ujfalusi <[email protected]>
ASoC: rt5682: Fix deadlock on resume

Mario Limonciello <[email protected]>
drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled

Matthew Brost <[email protected]>
drm/i915: Lock timeline mutex directly in error path of eb_pin_timeline

Dan Carpenter <[email protected]>
drm/i915/overlay: Prevent divide by zero bugs in scaling

Anitha Chrisanthus <[email protected]>
drm/kmb: Fix for build errors with Warray-bounds

Alexander Stein <[email protected]>
drm: mxsfb: Fix NULL pointer dereference

Yannick Vignon <[email protected]>
net: stmmac: ensure PTP time register reads are consistent

Daniel Borkmann <[email protected]>
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work

Camel Guo <[email protected]>
net: stmmac: dump gmac4 DMA registers correctly

Lior Nahmanson <[email protected]>
net: macsec: Verify that send_sci is on when setting Tx sci explicitly

Lior Nahmanson <[email protected]>
net: macsec: Fix offload support for NETDEV_UNREGISTER event

Jisheng Zhang <[email protected]>
net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()

Yuji Ishikawa <[email protected]>
net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request.

Wen Gu <[email protected]>
net/smc: Forward wakeup to smc socket waitqueue after fallback

Miquel Raynal <[email protected]>
net: ieee802154: Return meaningful error codes from the netlink helpers

Phil Sutter <[email protected]>
netfilter: nft_reject_bridge: Fix for missing reply from prerouting

Miquel Raynal <[email protected]>

    net: ieee802154: ca8210: Stop leaking skb's

Miquel Raynal <[email protected]>

    net: ieee802154: mcr20a: Fix lifs/sifs periods

Miquel Raynal <[email protected]>
net: ieee802154: hwsim: Ensure proper channel selection at probe time

Mark Zhang <[email protected]>
IB/cm: Release previously acquired reference counter in the cm_id_priv

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix tstats alloc and dealloc

Xin Xiong <[email protected]>
spi: uniphier: fix reference count leak in uniphier_spi_probe()

Miaoqian Lin <[email protected]>
spi: meson-spicc: add IRQ check in meson_spicc_probe

Benjamin Gaignard <[email protected]>
spi: mediatek: Avoid NULL pointer crash in interrupt

Kamal Dasu <[email protected]>
spi: bcm-qspi: check for valid cs before applying chip select

Joerg Roedel <[email protected]>
iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

Guoqing Jiang <[email protected]>
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

Peter Ujfalusi <[email protected]>
ALSA: hda: Skip codec shutdown in case the codec is not registered

Takashi Iwai <[email protected]>
ALSA: hda: Fix signedness of sscanf() arguments

Tom Rix <[email protected]>
ALSA: usb-audio: initialize variables that could ignore errors

Leon Romanovsky <[email protected]>
RDMA/mlx4: Don't continue event handler after memory allocation failure

Bernard Metzler <[email protected]>
RDMA/siw: Fix broken RDMA Read Fence/Resume logic.

Mike Marciniszyn <[email protected]>
IB/rdmavt: Validate remote_addr during loopback atomic tests

Dan Carpenter <[email protected]>
RDMA/siw: Fix refcounting leak in siw_create_qp()

Leon Romanovsky <[email protected]>
RDMA/ucma: Protect mc during concurrent multicast leaves

Maor Gottlieb <[email protected]>
RDMA/cma: Use correct address when leaving multicast group

Anshuman Khandual <[email protected]>
arm64: Add Cortex-A510 CPU part definition

James Morse <[email protected]>
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs

James Morse <[email protected]>
KVM: arm64: Avoid consuming a stale esr value when SError occur

Mayuresh Chitale <[email protected]>
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode

Guenter Roeck <[email protected]>
Revert "ASoC: mediatek: Check for error clk pointer"

Paolo Abeni <[email protected]>
mptcp: fix msk traversal in mptcp_nl_cmd_set_flags()

Helge Deller <[email protected]>
fbcon: Add option to enable legacy hardware acceleration

Helge Deller <[email protected]>
Revert "fbcon: Disable accelerated scrolling"

Helge Deller <[email protected]>
Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix AIP early init panic

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix alloc failure with larger txqueuelen

Mike Marciniszyn <[email protected]>
IB/hfi1: Fix panic with larger ipoib send_queue_size

Jordy Zomer <[email protected]>
dma-buf: heaps: Fix potential spectre v1 gadget

Ryan Bair <[email protected]>
cifs: fix workstation_name for multiuser mounts

Martin K. Petersen <[email protected]>
block: bio-integrity: Advance seed correctly for larger interval sizes

Lang Yu <[email protected]>
mm/kmemleak: avoid scanning potential huge holes

Mike Rapoport <[email protected]>
mm/pgtable: define pte_index so that preprocessor could recognize it

Pasha Tatashin <[email protected]>
mm/debug_vm_pgtable: remove pte entry from the page table

Uday Shankar <[email protected]>
nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()

Aun-Ali Zaidi <[email protected]>
drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels

Paul Hsieh <[email protected]>
drm/amd/display: watermark latencies is not enough on DCN31

Agustin Gutierrez <[email protected]>
drm/amd/display: Update watermark values for DCN301

Evan Quan <[email protected]>
drm/amd/pm: correct the MGpuFanBoost support for Beige Goby

Lang Yu <[email protected]>
drm/amdgpu: fix a potential GPU hang on cyan skillfish

Imre Deak <[email protected]>
drm/i915/adlp: Fix TypeC PHY-ready status readout

Nick Lopez <[email protected]>
drm/nouveau: fix off by one in BIOS boundary checking

Dominique Martinet <[email protected]>
Revert "fs/9p: search open fids first"

Filipe Manana <[email protected]>
btrfs: fix use-after-free after failure to create a snapshot

Shin'ichiro Kawasaki <[email protected]>
btrfs: fix deadlock between quota disable and qgroup rescan worker

Qu Wenruo <[email protected]>
btrfs: don't start transaction for scrub if the fs is mounted read-only

Anton Lundin <[email protected]>
ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage

Christian Lachner <[email protected]>
ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

Christian Lachner <[email protected]>
ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

Christian Lachner <[email protected]>
ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

Albert Geantă <[email protected]>
ALSA: hda/realtek: Add quirk for ASUS GU603

Takashi Iwai <[email protected]>
ALSA: hda: realtek: Fix race at concurrent COEF updates

Takashi Iwai <[email protected]>
ALSA: hda: Fix UAF of leds class devs at unbinding

Jonas Hahnfeld <[email protected]>
ALSA: usb-audio: Correct quirk for VF0770

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

Dmitry Osipenko <[email protected]>
ASoC: hdmi-codec: Fix OOB memory accesses

Patrice Chotard <[email protected]>
spi: stm32-qspi: Update spi registering

Minghao Chi <[email protected]>
ipc/sem: do not sleep with a spin lock held

Paul Moore <[email protected]>
audit: improve audit queue handling when "audit=1" on cmdline

Vratislav Bendel <[email protected]>
selinux: fix double free of cond_list on error paths

Ville Syrjälä <[email protected]>
drm/i915: Disable DSB usage for now

-------------

Diffstat:

 Documentation/gpu/todo.rst                         |  24 -
 Makefile                                           |   4 +-
 arch/arm64/include/asm/cputype.h                   |   2 +
 arch/arm64/kvm/arm.c                               |  51 +-
 arch/arm64/kvm/handle_exit.c                       |   8 +
 arch/arm64/kvm/hyp/include/hyp/switch.h            |   3 +-
 arch/riscv/kvm/vcpu.c                              |   4 +
 arch/x86/events/intel/core.c                       |  13 +
 arch/x86/events/intel/pt.c                         |   5 +-
 block/bio-integrity.c                              |   2 +-
 drivers/ata/libata-core.c                          |  10 +
 drivers/dma-buf/dma-heap.c                         |   2 +
 drivers/edac/altera_edac.c                         |   2 +-
 drivers/edac/xgene_edac.c                          |   2 +-
 drivers/gpio/gpio-idt3243x.c                       |   2 +-
 drivers/gpio/gpio-mpc8xxx.c                        |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |   3 +-
 drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c             |   3 +
 .../drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c |  16 +-
 .../amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c   |  20 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |  20 +
 .../drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c    |   6 +-
 drivers/gpu/drm/i915/display/intel_overlay.c       |   3 +
 drivers/gpu/drm/i915/display/intel_tc.c            |   3 +-
 drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c     |   9 +-
 drivers/gpu/drm/i915/i915_pci.c                    |   2 +-
 drivers/gpu/drm/kmb/kmb_plane.c                    |   6 -
 drivers/gpu/drm/mxsfb/mxsfb_kms.c                  |   6 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c    |   2 +-
 drivers/infiniband/core/cm.c                       |   2 +-
 drivers/infiniband/core/cma.c                      |  22 +-
 drivers/infiniband/core/ucma.c                     |  34 +-
 drivers/infiniband/hw/hfi1/ipoib.h                 |   2 +-
 drivers/infiniband/hw/hfi1/ipoib_main.c            |  27 +-
 drivers/infiniband/hw/hfi1/ipoib_tx.c              |  38 +-
 drivers/infiniband/hw/mlx4/main.c                  |   2 +-
 drivers/infiniband/sw/rdmavt/qp.c                  |   2 +
 drivers/infiniband/sw/siw/siw.h                    |   7 +-
 drivers/infiniband/sw/siw/siw_qp_rx.c              |  20 +-
 drivers/infiniband/sw/siw/siw_verbs.c              |   3 +-
 drivers/iommu/amd/init.c                           |   2 +
 drivers/iommu/intel/irq_remapping.c                |  13 +-
 drivers/net/dsa/Kconfig                            |   1 +
 drivers/net/ethernet/google/gve/gve_adminq.c       |   2 +-
 drivers/net/ethernet/intel/e1000e/e1000.h          |   4 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  20 +
 drivers/net/ethernet/intel/e1000e/netdev.c         |  33 +-
 .../net/ethernet/stmicro/stmmac/dwmac-visconti.c   |   9 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h    |   1 +
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |  19 +-
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  19 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   6 +-
 drivers/net/ieee802154/ca8210.c                    |   1 +
 drivers/net/ieee802154/mac802154_hwsim.c           |   1 +
 drivers/net/ieee802154/mcr20a.c                    |   4 +-
 drivers/net/macsec.c                               |  33 +-
 drivers/nvme/host/fabrics.h                        |   1 +
 drivers/pinctrl/bcm/pinctrl-bcm2835.c              |  23 +-
 drivers/pinctrl/intel/pinctrl-intel.c              |  64 +--
 drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c        |   8 +-
 drivers/rtc/rtc-mc146818-lib.c                     |   2 +-
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c                  |  21 +-
 drivers/soc/mediatek/mtk-scpsys.c                  |  15 +-
 drivers/spi/spi-bcm-qspi.c                         |   2 +-
 drivers/spi/spi-meson-spicc.c                      |   5 +
 drivers/spi/spi-mt65xx.c                           |   2 +-
 drivers/spi/spi-stm32-qspi.c                       |  47 +-
 drivers/spi/spi-uniphier.c                         |  18 +-
 drivers/video/console/Kconfig                      |  20 +
 drivers/video/fbdev/core/bitblit.c                 |  16 +
 drivers/video/fbdev/core/fbcon.c                   | 557 ++++++++++++++++++++-
 drivers/video/fbdev/core/fbcon.h                   |  72 +++
 drivers/video/fbdev/core/fbcon_ccw.c               |  28 +-
 drivers/video/fbdev/core/fbcon_cw.c                |  28 +-
 drivers/video/fbdev/core/fbcon_rotate.h            |   9 +
 drivers/video/fbdev/core/fbcon_ud.c                |  37 +-
 drivers/video/fbdev/core/tileblit.c                |  16 +
 drivers/video/fbdev/skeletonfb.c                   |  12 +-
 fs/9p/fid.c                                        |   9 +-
 fs/btrfs/block-group.c                             |  13 +
 fs/btrfs/ioctl.c                                   |   7 +-
 fs/btrfs/qgroup.c                                  |  21 +-
 fs/btrfs/transaction.c                             |  24 +
 fs/btrfs/transaction.h                             |   2 +
 fs/cifs/connect.c                                  |  13 +
 fs/cifs/sess.c                                     |   6 +-
 fs/ext4/ext4.h                                     |   3 +
 fs/ext4/extents.c                                  |   4 +
 fs/ext4/fast_commit.c                              |  89 ++--
 fs/ext4/inline.c                                   |  10 +-
 fs/ext4/mballoc.c                                  |  26 +-
 fs/nfsd/nfs4state.c                                |   4 +-
 include/linux/fb.h                                 |   2 +-
 include/linux/libata.h                             |   1 +
 include/linux/pgtable.h                            |   1 +
 include/net/neighbour.h                            |  18 +-
 include/uapi/sound/asound.h                        |   4 +-
 ipc/sem.c                                          |   4 +-
 kernel/audit.c                                     |  62 ++-
 kernel/bpf/ringbuf.c                               |   2 +-
 kernel/cgroup/cpuset.c                             |  10 +
 kernel/events/core.c                               |  16 +
 mm/debug_vm_pgtable.c                              |   2 +
 mm/kmemleak.c                                      |  13 +-
 net/bridge/netfilter/nft_reject_bridge.c           |   8 +-
 net/core/neighbour.c                               |  18 +-
 net/ieee802154/nl802154.c                          |   8 +-
 net/mptcp/pm_netlink.c                             |  34 +-
 net/smc/af_smc.c                                   | 133 ++++-
 net/smc/smc.h                                      |  20 +-
 security/selinux/ss/conditional.c                  |   3 +-
 sound/pci/hda/hda_auto_parser.c                    |   2 +-
 sound/pci/hda/hda_codec.c                          |   4 +
 sound/pci/hda/hda_generic.c                        |  17 +-
 sound/pci/hda/hda_generic.h                        |   3 +
 sound/pci/hda/patch_realtek.c                      |  67 ++-
 sound/soc/codecs/cpcap.c                           |   2 +
 sound/soc/codecs/hdmi-codec.c                      |   2 +-
 sound/soc/codecs/lpass-rx-macro.c                  |   8 +-
 sound/soc/codecs/max9759.c                         |   3 +-
 sound/soc/codecs/rt5682-i2c.c                      |  15 +-
 sound/soc/codecs/rt5682.c                          |  24 +-
 sound/soc/codecs/rt5682.h                          |   2 -
 sound/soc/codecs/wcd938x.c                         |  31 +-
 sound/soc/fsl/pcm030-audio-fabric.c                |  11 +-
 sound/soc/generic/simple-card.c                    |  26 +-
 sound/soc/qcom/qdsp6/q6apm-dai.c                   |   7 +-
 sound/soc/soc-ops.c                                |  29 +-
 sound/soc/xilinx/xlnx_formatter_pcm.c              |  27 +-
 sound/usb/mixer.c                                  |   4 +
 sound/usb/quirks-table.h                           |   2 +-
 tools/bpf/resolve_btfids/Makefile                  |   6 +-
 tools/include/uapi/sound/asound.h                  |   4 +-
 tools/objtool/check.c                              |   2 +-
 tools/perf/util/stat-display.c                     |  19 +-
 tools/testing/selftests/exec/Makefile              |   2 +-
 tools/testing/selftests/futex/Makefile             |   4 +-
 .../selftests/netfilter/nft_concat_range.sh        |  72 ++-
 tools/testing/selftests/netfilter/nft_nat.sh       | 152 ++++++
 139 files changed, 2130 insertions(+), 572 deletions(-)
author maintainer
#1 lore raw

PATCH 1/126 drm/i915: Disable DSB usage for now

From: Ville Syrjälä <[email protected]>

commit 99510e1afb4863a225207146bd988064c5fd0629 upstream.

Turns out the DSB has trouble correctly loading the gamma LUT.

Quoted 1 line

From a cursory look maybe like some entries do not load

properly, or they get loaded with some gibberish. Unfortunately our current kms_color/etc. tests do not seem to catch this.

I had a brief look at the generated DSB batch and it looked correct. Tried a few quick tricks like writing the index register twice/etc. but didn't see any improvement. Also tried switching to the 10bit gamma mode in case there is yet another issue with the multi-segment mode, but even the 10bit mode was showing issues.

Switching to mmio fixes all of it. I suppose one theory is that maybe the DSB bangs on the LUT too quickly and it can't keep up and instead some data either gets dropped or corrupted. To confirm that someone should try to slow down the DSB's progress a bit. Another thought was that maybe the LUT has crappy dual porting and you get contention if you try to load it during active scanout. But why then would the mmio path work, unless it's just sufficiently slow?

Whatever the case, this is currently busted so let's disable it until we get to the root of the problem.

---
 drivers/gpu/drm/i915/i915_pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pci.c +1 -1
@@ -866,7 +866,7 @@ static const struct intel_device_info js
 	TGL_CURSOR_OFFSETS, \
 	.has_global_mocs = 1, \
 	.has_pxp = 1, \
-	.display.has_dsb = 1
+	.display.has_dsb = 0 /* FIXME: LUT load is broken with DSB */
 
 static const struct intel_device_info tgl_info = {
 	GEN12_FEATURES,
author maintainer
#2 lore raw

PATCH 2/126 selinux: fix double free of cond_list on error paths

In reply to Greg Kroah-Hartman

From: Vratislav Bendel <[email protected]>

commit 186edf7e368c40d06cf727a1ad14698ea67b74ad upstream.

On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop.

Also consistently reset the cond_list pointer to NULL after freeing.

[PM: fix line lengths in the description]
---
 security/selinux/ss/conditional.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
security/selinux/ss/conditional.c +2 -1
@@ -152,6 +152,8 @@ static void cond_list_destroy(struct pol
 	for (i = 0; i < p->cond_list_len; i++)
 		cond_node_destroy(&p->cond_list[i]);
 	kfree(p->cond_list);
+	p->cond_list = NULL;
+	p->cond_list_len = 0;
 }
 
 void cond_policydb_destroy(struct policydb *p)
@@ -441,7 +443,6 @@ int cond_read_list(struct policydb *p, v
 	return 0;
 err:
 	cond_list_destroy(p);
-	p->cond_list = NULL;
 	return rc;
 }
 
author maintainer
#3 lore raw

PATCH 3/126 audit: improve audit queue handling when "audit=1" on cmdline

In reply to Greg Kroah-Hartman

From: Paul Moore <[email protected]>

commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream.

When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time.

This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system.

- kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns.

- Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon.

- The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system.

- kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue().

Fixes 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking")
Fixes f4b3ee3c85551 ("audit: improve robustness of the audit queue handling")
---
 kernel/audit.c |   62 +++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 19 deletions(-)
kernel/audit.c +43 -19
@@ -541,20 +541,22 @@ static void kauditd_printk_skb(struct sk
 /**
  * kauditd_rehold_skb - Handle a audit record send failure in the hold queue
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * This should only be used by the kauditd_thread when it fails to flush the
  * hold queue.
  */
-static void kauditd_rehold_skb(struct sk_buff *skb)
+static void kauditd_rehold_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* put the record back in the queue at the same place */
-	skb_queue_head(&audit_hold_queue, skb);
+	/* put the record back in the queue */
+	skb_queue_tail(&audit_hold_queue, skb);
 }
 
 /**
  * kauditd_hold_skb - Queue an audit record, waiting for auditd
  * @skb: audit record
+ * @error: error code
  *
  * Description:
  * Queue the audit record, waiting for an instance of auditd.  When this
@@ -564,19 +566,31 @@ static void kauditd_rehold_skb(struct sk
  * and queue it, if we have room.  If we want to hold on to the record, but we
  * don't have room, record a record lost message.
  */
-static void kauditd_hold_skb(struct sk_buff *skb)
+static void kauditd_hold_skb(struct sk_buff *skb, int error)
 {
 	/* at this point it is uncertain if we will ever send this to auditd so
 	 * try to send the message via printk before we go any further */
 	kauditd_printk_skb(skb);
 
 	/* can we just silently drop the message? */
-	if (!audit_default) {
-		kfree_skb(skb);
-		return;
+	if (!audit_default)
+		goto drop;
+
+	/* the hold queue is only for when the daemon goes away completely,
+	 * not -EAGAIN failures; if we are in a -EAGAIN state requeue the
+	 * record on the retry queue unless it's full, in which case drop it
+	 */
+	if (error == -EAGAIN) {
+		if (!audit_backlog_limit ||
+		    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+			skb_queue_tail(&audit_retry_queue, skb);
+			return;
+		}
+		audit_log_lost("kauditd retry queue overflow");
+		goto drop;
 	}
 
-	/* if we have room, queue the message */
+	/* if we have room in the hold queue, queue the message */
 	if (!audit_backlog_limit ||
 	    skb_queue_len(&audit_hold_queue) < audit_backlog_limit) {
 		skb_queue_tail(&audit_hold_queue, skb);
@@ -585,24 +599,32 @@ static void kauditd_hold_skb(struct sk_b
 
 	/* we have no other options - drop the message */
 	audit_log_lost("kauditd hold queue overflow");
+drop:
 	kfree_skb(skb);
 }
 
 /**
  * kauditd_retry_skb - Queue an audit record, attempt to send again to auditd
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * Not as serious as kauditd_hold_skb() as we still have a connected auditd,
  * but for some reason we are having problems sending it audit records so
  * queue the given record and attempt to resend.
  */
-static void kauditd_retry_skb(struct sk_buff *skb)
+static void kauditd_retry_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* NOTE: because records should only live in the retry queue for a
-	 * short period of time, before either being sent or moved to the hold
-	 * queue, we don't currently enforce a limit on this queue */
-	skb_queue_tail(&audit_retry_queue, skb);
+	if (!audit_backlog_limit ||
+	    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+		skb_queue_tail(&audit_retry_queue, skb);
+		return;
+	}
+
+	/* we have to drop the record, send it via printk as a last effort */
+	kauditd_printk_skb(skb);
+	audit_log_lost("kauditd retry queue overflow");
+	kfree_skb(skb);
 }
 
 /**
@@ -640,7 +662,7 @@ static void auditd_reset(const struct au
 	/* flush the retry queue to the hold queue, but don't touch the main
 	 * queue since we need to process that normally for multicast */
 	while ((skb = skb_dequeue(&audit_retry_queue)))
-		kauditd_hold_skb(skb);
+		kauditd_hold_skb(skb, -ECONNREFUSED);
 }
 
 /**
@@ -714,16 +736,18 @@ static int kauditd_send_queue(struct soc
 			      struct sk_buff_head *queue,
 			      unsigned int retry_limit,
 			      void (*skb_hook)(struct sk_buff *skb),
-			      void (*err_hook)(struct sk_buff *skb))
+			      void (*err_hook)(struct sk_buff *skb, int error))
 {
 	int rc = 0;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
+	struct sk_buff *skb_tail;
 	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */
 
-	while ((skb = skb_dequeue(queue))) {
+	skb_tail = skb_peek_tail(queue);
+	while ((skb != skb_tail) && (skb = skb_dequeue(queue))) {
 		/* call the skb_hook for each skb we touch */
 		if (skb_hook)
 			(*skb_hook)(skb);
@@ -731,7 +755,7 @@ static int kauditd_send_queue(struct soc
 		/* can we send to anyone via unicast? */
 		if (!sk) {
 			if (err_hook)
-				(*err_hook)(skb);
+				(*err_hook)(skb, -ECONNREFUSED);
 			continue;
 		}
 
@@ -745,7 +769,7 @@ retry:
 			    rc == -ECONNREFUSED || rc == -EPERM) {
 				sk = NULL;
 				if (err_hook)
-					(*err_hook)(skb);
+					(*err_hook)(skb, rc);
 				if (rc == -EAGAIN)
 					rc = 0;
 				/* continue to drain the queue */
author maintainer
#4 lore raw

PATCH 4/126 ipc/sem: do not sleep with a spin lock held

In reply to Greg Kroah-Hartman

From: Minghao Chi <[email protected]>

commit 520ba724061cef59763e2b6f5b26e8387c2e5822 upstream.

We can't call kvfree() with a spin lock held, so defer it.

Fixes fc37a3b8b438 ("[PATCH] ipc sem: use kvmalloc for sem_undo allocation")
Cc Arnd Bergmann <[email protected]>
Cc Yang Guang <[email protected]>
Cc Davidlohr Bueso <[email protected]>
Cc Randy Dunlap <[email protected]>
Cc Bhaskar Chowdhury <[email protected]>
Cc Vasily Averin <[email protected]>
---
 ipc/sem.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
ipc/sem.c +2 -2
@@ -1964,6 +1964,7 @@ static struct sem_undo *find_alloc_undo(
 	 */
 	un = lookup_undo(ulp, semid);
 	if (un) {
+		spin_unlock(&ulp->lock);
 		kvfree(new);
 		goto success;
 	}
@@ -1976,9 +1977,8 @@ static struct sem_undo *find_alloc_undo(
 	ipc_assert_locked_object(&sma->sem_perm);
 	list_add(&new->list_id, &sma->list_id);
 	un = new;
-
-success:
 	spin_unlock(&ulp->lock);
+success:
 	sem_unlock(sma, -1);
 out:
 	return un;
author maintainer
#5 lore raw

PATCH 5/126 spi: stm32-qspi: Update spi registering

In reply to Greg Kroah-Hartman

From: Patrice Chotard <[email protected]>

commit e4d63473d3110afd170e6e0e48494d3789d26136 upstream.

Some device driver need to communicate to qspi device during the remove process, qspi controller must be functional when spi_unregister_master() is called.

To ensure this, replace devm_spi_register_master() by spi_register_master() and spi_unregister_master() is called directly in .remove callback before stopping the qspi controller.

This issue was put in evidence using kernel v5.11 and later with a spi-nor which supports the software reset feature introduced by commit d73ee7534cc5 ("mtd: spi-nor: core: perform a Soft Reset on shutdown")

Fixes c530cd1d9d5e ("spi: spi-mem: add stm32 qspi controller")
---
 drivers/spi/spi-stm32-qspi.c |   47 +++++++++++++++----------------------------
 1 file changed, 17 insertions(+), 30 deletions(-)
drivers/spi/spi-stm32-qspi.c +17 -30
@@ -688,7 +688,7 @@ static int stm32_qspi_probe(struct platf
 	struct resource *res;
 	int ret, irq;
 
-	ctrl = spi_alloc_master(dev, sizeof(*qspi));
+	ctrl = devm_spi_alloc_master(dev, sizeof(*qspi));
 	if (!ctrl)
 		return -ENOMEM;
 
@@ -697,58 +697,46 @@ static int stm32_qspi_probe(struct platf
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi");
 	qspi->io_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(qspi->io_base)) {
-		ret = PTR_ERR(qspi->io_base);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->io_base))
+		return PTR_ERR(qspi->io_base);
 
 	qspi->phys_base = res->start;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm");
 	qspi->mm_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(qspi->mm_base)) {
-		ret = PTR_ERR(qspi->mm_base);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->mm_base))
+		return PTR_ERR(qspi->mm_base);
 
 	qspi->mm_size = resource_size(res);
-	if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) {
-		ret = -EINVAL;
-		goto err_master_put;
-	}
+	if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ)
+		return -EINVAL;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto err_master_put;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
 			       dev_name(dev), qspi);
 	if (ret) {
 		dev_err(dev, "failed to request irq\n");
-		goto err_master_put;
+		return ret;
 	}
 
 	init_completion(&qspi->data_completion);
 	init_completion(&qspi->match_completion);
 
 	qspi->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		ret = PTR_ERR(qspi->clk);
-		goto err_master_put;
-	}
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
 
 	qspi->clk_rate = clk_get_rate(qspi->clk);
-	if (!qspi->clk_rate) {
-		ret = -EINVAL;
-		goto err_master_put;
-	}
+	if (!qspi->clk_rate)
+		return -EINVAL;
 
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "can not enable the clock\n");
-		goto err_master_put;
+		return ret;
 	}
 
 	rstc = devm_reset_control_get_exclusive(dev, NULL);
@@ -784,7 +772,7 @@ static int stm32_qspi_probe(struct platf
 	pm_runtime_enable(dev);
 	pm_runtime_get_noresume(dev);
 
-	ret = devm_spi_register_master(dev, ctrl);
+	ret = spi_register_master(ctrl);
 	if (ret)
 		goto err_pm_runtime_free;
 
@@ -806,8 +794,6 @@ err_dma_free:
 	stm32_qspi_dma_free(qspi);
 err_clk_disable:
 	clk_disable_unprepare(qspi->clk);
-err_master_put:
-	spi_master_put(qspi->ctrl);
 
 	return ret;
 }
@@ -817,6 +803,7 @@ static int stm32_qspi_remove(struct plat
 	struct stm32_qspi *qspi = platform_get_drvdata(pdev);
 
 	pm_runtime_get_sync(qspi->dev);
+	spi_unregister_master(qspi->ctrl);
 	/* disable qspi */
 	writel_relaxed(0, qspi->io_base + QSPI_CR);
 	stm32_qspi_dma_free(qspi);
author maintainer
#6 lore raw

PATCH 6/126 ASoC: hdmi-codec: Fix OOB memory accesses

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit 06feec6005c9d9500cd286ec440aabf8b2ddd94d upstream.

Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN.

---
 include/uapi/sound/asound.h   |    4 +++-
 sound/soc/codecs/hdmi-codec.c |    2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)
include/uapi/sound/asound.h +3 -1
@@ -56,8 +56,10 @@
  *                                                                          *
  ****************************************************************************/
 
+#define AES_IEC958_STATUS_SIZE		24
+
 struct snd_aes_iec958 {
-	unsigned char status[24];	/* AES/IEC958 channel status bits */
+	unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */
 	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
 	unsigned char pad;		/* nothing */
 	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
sound/soc/codecs/hdmi-codec.c +1 -1
@@ -277,7 +277,7 @@ struct hdmi_codec_priv {
 	bool busy;
 	struct snd_soc_jack *jack;
 	unsigned int jack_status;
-	u8 iec_status[5];
+	u8 iec_status[AES_IEC958_STATUS_SIZE];
 };
 
 static const struct snd_soc_dapm_widget hdmi_widgets[] = {
author maintainer
#7 lore raw

PATCH 7/126 ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
sound/soc/soc-ops.c +16 -2
@@ -316,13 +316,27 @@ int snd_soc_put_volsw(struct snd_kcontro
 	if (sign_bit)
 		mask = BIT(sign_bit + 1) - 1;
 
-	val = ((ucontrol->value.integer.value[0] + min) & mask);
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
+	val = (val + min) & mask;
 	if (invert)
 		val = max - val;
 	val_mask = mask << shift;
 	val = val << shift;
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val2 = ((ucontrol->value.integer.value[1] + min) & mask);
+		val2 = ucontrol->value.integer.value[1];
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max - min)
+			return -EINVAL;
+		if (val2 < 0)
+			return -EINVAL;
+		val2 = (val2 + min) & mask;
 		if (invert)
 			val2 = max - val2;
 		if (reg == reg2) {
author maintainer
#8 lore raw

PATCH 8/126 ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
sound/soc/soc-ops.c +8 -1
@@ -423,8 +423,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 	int err = 0;
 	unsigned int val, val_mask;
 
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
 	val_mask = mask << shift;
-	val = (ucontrol->value.integer.value[0] + min) & mask;
+	val = (val + min) & mask;
 	val = val << shift;
 
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);
author maintainer
#9 lore raw

PATCH 9/126 ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |    2 ++
 1 file changed, 2 insertions(+)
sound/soc/soc-ops.c +2 -0
@@ -879,6 +879,8 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	long val = ucontrol->value.integer.value[0];
 	unsigned int i;
 
+	if (val < mc->min || val > mc->max)
+		return -EINVAL;
 	if (invert)
 		val = max - val;
 	val &= mask;
author maintainer
#10 lore raw

PATCH 10/126 ALSA: usb-audio: Correct quirk for VF0770

In reply to Greg Kroah-Hartman

From: Jonas Hahnfeld <[email protected]>

commit 4ee02e20893d2f9e951c7888f2284fa608ddaa35 upstream.

This device provides both audio and video. The original quirk added in commit 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770") used USB_DEVICE to match the vendor and product ID. Depending on module order, if snd-usb-audio was asked first, it would match the entire device and uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE to restore uvcvideo matching in all cases.

---
 sound/usb/quirks-table.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/usb/quirks-table.h +1 -1
@@ -84,7 +84,7 @@
  * combination.
  */
 {
-	USB_DEVICE(0x041e, 0x4095),
+	USB_AUDIO_DEVICE(0x041e, 0x4095),
 	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
 		.ifnum = QUIRK_ANY_INTERFACE,
 		.type = QUIRK_COMPOSITE,
author maintainer
#11 lore raw

PATCH 11/126 ALSA: hda: Fix UAF of leds class devs at unbinding

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 549f8ffc7b2f7561bea7f90930b6c5104318e87b upstream.

The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback.

For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec.

---
 sound/pci/hda/hda_generic.c |   17 +++++++++++++++--
 sound/pci/hda/hda_generic.h |    3 +++
 2 files changed, 18 insertions(+), 2 deletions(-)
sound/pci/hda/hda_generic.c +15 -2
@@ -91,6 +91,12 @@ static void snd_hda_gen_spec_free(struct
 	free_kctls(spec);
 	snd_array_free(&spec->paths);
 	snd_array_free(&spec->loopback_list);
+#ifdef CONFIG_SND_HDA_GENERIC_LEDS
+	if (spec->led_cdevs[LED_AUDIO_MUTE])
+		led_classdev_unregister(spec->led_cdevs[LED_AUDIO_MUTE]);
+	if (spec->led_cdevs[LED_AUDIO_MICMUTE])
+		led_classdev_unregister(spec->led_cdevs[LED_AUDIO_MICMUTE]);
+#endif
 }
 
 /*
@@ -3922,7 +3928,10 @@ static int create_mute_led_cdev(struct h
 						enum led_brightness),
 				bool micmute)
 {
+	struct hda_gen_spec *spec = codec->spec;
 	struct led_classdev *cdev;
+	int idx = micmute ? LED_AUDIO_MICMUTE : LED_AUDIO_MUTE;
+	int err;
 
 	cdev = devm_kzalloc(&codec->core.dev, sizeof(*cdev), GFP_KERNEL);
 	if (!cdev)
@@ -3932,10 +3941,14 @@ static int create_mute_led_cdev(struct h
 	cdev->max_brightness = 1;
 	cdev->default_trigger = micmute ? "audio-micmute" : "audio-mute";
 	cdev->brightness_set_blocking = callback;
-	cdev->brightness = ledtrig_audio_get(micmute ? LED_AUDIO_MICMUTE : LED_AUDIO_MUTE);
+	cdev->brightness = ledtrig_audio_get(idx);
 	cdev->flags = LED_CORE_SUSPENDRESUME;
 
-	return devm_led_classdev_register(&codec->core.dev, cdev);
+	err = led_classdev_register(&codec->core.dev, cdev);
+	if (err < 0)
+		return err;
+	spec->led_cdevs[idx] = cdev;
+	return 0;
 }
 
 /**
sound/pci/hda/hda_generic.h +3 -0
@@ -294,6 +294,9 @@ struct hda_gen_spec {
 				   struct hda_jack_callback *cb);
 	void (*mic_autoswitch_hook)(struct hda_codec *codec,
 				    struct hda_jack_callback *cb);
+
+	/* leds */
+	struct led_classdev *led_cdevs[NUM_AUDIO_LEDS];
 };
 
 /* values for add_stereo_mix_input flag */
author maintainer
#12 lore raw

PATCH 12/126 ALSA: hda: realtek: Fix race at concurrent COEF updates

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit b837a9f5ab3bdfab9233c9f98a6bef717673a3e5 upstream.

The COEF access is done with two steps: setting the index then read or write the data. When multiple COEF accesses are performed concurrently, the index and data might be paired unexpectedly. In most cases, this isn't a big problem as the COEF setup is done at the initialization, but some dynamic changes like the mute LED may hit such a race.

For avoiding the racy COEF accesses, this patch introduces a new mutex coef_mutex to alc_spec, and wrap the COEF accessing functions with it.

---
 sound/pci/hda/patch_realtek.c |   61 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 50 insertions(+), 11 deletions(-)
sound/pci/hda/patch_realtek.c +50 -11
@@ -97,6 +97,7 @@ struct alc_spec {
 	unsigned int gpio_mic_led_mask;
 	struct alc_coef_led mute_led_coef;
 	struct alc_coef_led mic_led_coef;
+	struct mutex coef_mutex;
 
 	hda_nid_t headset_mic_pin;
 	hda_nid_t headphone_mic_pin;
@@ -132,8 +133,8 @@ struct alc_spec {
  * COEF access helper functions
  */
 
-static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
-			       unsigned int coef_idx)
+static int __alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				 unsigned int coef_idx)
 {
 	unsigned int val;
 
@@ -142,28 +143,61 @@ static int alc_read_coefex_idx(struct hd
 	return val;
 }
 
+static int alc_read_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+			       unsigned int coef_idx)
+{
+	struct alc_spec *spec = codec->spec;
+	unsigned int val;
+
+	mutex_lock(&spec->coef_mutex);
+	val = __alc_read_coefex_idx(codec, nid, coef_idx);
+	mutex_unlock(&spec->coef_mutex);
+	return val;
+}
+
 #define alc_read_coef_idx(codec, coef_idx) \
 	alc_read_coefex_idx(codec, 0x20, coef_idx)
 
-static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
-				 unsigned int coef_idx, unsigned int coef_val)
+static void __alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				   unsigned int coef_idx, unsigned int coef_val)
 {
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_COEF_INDEX, coef_idx);
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PROC_COEF, coef_val);
 }
 
+static void alc_write_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				 unsigned int coef_idx, unsigned int coef_val)
+{
+	struct alc_spec *spec = codec->spec;
+
+	mutex_lock(&spec->coef_mutex);
+	__alc_write_coefex_idx(codec, nid, coef_idx, coef_val);
+	mutex_unlock(&spec->coef_mutex);
+}
+
 #define alc_write_coef_idx(codec, coef_idx, coef_val) \
 	alc_write_coefex_idx(codec, 0x20, coef_idx, coef_val)
 
+static void __alc_update_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
+				    unsigned int coef_idx, unsigned int mask,
+				    unsigned int bits_set)
+{
+	unsigned int val = __alc_read_coefex_idx(codec, nid, coef_idx);
+
+	if (val != -1)
+		__alc_write_coefex_idx(codec, nid, coef_idx,
+				       (val & ~mask) | bits_set);
+}
+
 static void alc_update_coefex_idx(struct hda_codec *codec, hda_nid_t nid,
 				  unsigned int coef_idx, unsigned int mask,
 				  unsigned int bits_set)
 {
-	unsigned int val = alc_read_coefex_idx(codec, nid, coef_idx);
+	struct alc_spec *spec = codec->spec;
 
-	if (val != -1)
-		alc_write_coefex_idx(codec, nid, coef_idx,
-				     (val & ~mask) | bits_set);
+	mutex_lock(&spec->coef_mutex);
+	__alc_update_coefex_idx(codec, nid, coef_idx, mask, bits_set);
+	mutex_unlock(&spec->coef_mutex);
 }
 
 #define alc_update_coef_idx(codec, coef_idx, mask, bits_set)	\
@@ -196,13 +230,17 @@ struct coef_fw {
 static void alc_process_coef_fw(struct hda_codec *codec,
 				const struct coef_fw *fw)
 {
+	struct alc_spec *spec = codec->spec;
+
+	mutex_lock(&spec->coef_mutex);
 	for (; fw->nid; fw++) {
 		if (fw->mask == (unsigned short)-1)
-			alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val);
+			__alc_write_coefex_idx(codec, fw->nid, fw->idx, fw->val);
 		else
-			alc_update_coefex_idx(codec, fw->nid, fw->idx,
-					      fw->mask, fw->val);
+			__alc_update_coefex_idx(codec, fw->nid, fw->idx,
+						fw->mask, fw->val);
 	}
+	mutex_unlock(&spec->coef_mutex);
 }
 
 /*
@@ -1148,6 +1186,7 @@ static int alc_alloc_spec(struct hda_cod
 	codec->spdif_status_reset = 1;
 	codec->forced_resume = 1;
 	codec->patch_ops = alc_patch_ops;
+	mutex_init(&spec->coef_mutex);
 
 	err = alc_codec_rename_from_preset(codec);
 	if (err < 0) {
author maintainer
#13 lore raw

PATCH 13/126 ALSA: hda/realtek: Add quirk for ASUS GU603

In reply to Greg Kroah-Hartman

From: Albert Geantă <[email protected]>

commit 94db9cc8f8fa2d5426ce79ec4ca16028f7084224 upstream.

The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to other ASUS devices for correctly routing the 4 integrated speakers. This fixes it by adding a corresponding quirk entry, which connects the bass speakers to the proper DAC.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -8854,6 +8854,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),
author maintainer
#14 lore raw

PATCH 14/126 ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

In reply to Greg Kroah-Hartman

From: Christian Lachner <[email protected]>

commit 63394a16086fc2152869d7902621e2525e14bc40 upstream.

The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill effects but for completeness sake this commit makes up for that.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -2660,6 +2660,7 @@ static const struct hda_model_fixup alc8
 	{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
 	{.id = ALC887_FIXUP_ASUS_BASS, .name = "asus-bass"},
 	{.id = ALC1220_FIXUP_GB_DUAL_CODECS, .name = "dual-codecs"},
+	{.id = ALC1220_FIXUP_GB_X570, .name = "gb-x570"},
 	{.id = ALC1220_FIXUP_CLEVO_P950, .name = "clevo-p950"},
 	{}
 };
author maintainer
#15 lore raw

PATCH 15/126 ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

In reply to Greg Kroah-Hartman

From: Christian Lachner <[email protected]>

commit 41a8601302ecbe704ac970552c33dc942300fc37 upstream.

Newer versions of the X570 Master come with a newer revision of the mainboard chipset - the X570S. These boards have the same ALC1220 codec but seem to initialize the codec with a different parameter in Coef 0x7 which causes the output audio to be very low. We therefore write a known-good value to Coef 0x7 to fix that. As the value is the exact same as on the other X570(non-S) boards the same quirk-function can be shared between both generations.

This commit adds the Gigabyte X570S Aorus Master to the list of boards using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output and the no-audio after reboot from windows problems.

This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)
sound/pci/hda/patch_realtek.c +2 -0
@@ -2159,6 +2159,7 @@ static void alc1220_fixup_gb_x570(struct
 {
 	static const hda_nid_t conn1[] = { 0x0c };
 	static const struct coef_fw gb_x570_coefs[] = {
+		WRITE_COEF(0x07, 0x03c0),
 		WRITE_COEF(0x1a, 0x01c1),
 		WRITE_COEF(0x1b, 0x0202),
 		WRITE_COEF(0x43, 0x3005),
@@ -2586,6 +2587,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),
author maintainer
#16 lore raw

PATCH 16/126 ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

In reply to Greg Kroah-Hartman

From: Christian Lachner <[email protected]>

commit ea3541961376f733373839cc90493aafa8a7f733 upstream.

This commit switches the Gigabyte X570 Aorus Xtreme from using the ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes the no-audio after reboot from windows problem.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +1 -1
@@ -2586,7 +2586,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
-	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
author maintainer
#17 lore raw

PATCH 17/126 ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage

In reply to Greg Kroah-Hartman

From: Anton Lundin <[email protected]>

commit ac9f0c810684a1b161c18eb4b91ce84cbc13c91d upstream.

06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls") introduced additional calls to ata_identify_page_supported(), thus also adding indirectly accesses to the device log directory log page through ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices to lock up.

Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to the log directory in ata_log_supported() and add a blacklist entry with this flag for "SATADOM-ML 3ME" devices.

Fixes 636f6e2af4fb ("libata: add horkage for missing Identify Device log")
Cc [email protected] # v5.10+
---
 drivers/ata/libata-core.c |   10 ++++++++++
 include/linux/libata.h    |    1 +
 2 files changed, 11 insertions(+)
drivers/ata/libata-core.c +10 -0
@@ -2043,6 +2043,9 @@ static bool ata_log_supported(struct ata
 {
 	struct ata_port *ap = dev->link->ap;
 
+	if (dev->horkage & ATA_HORKAGE_NO_LOG_DIR)
+		return false;
+
 	if (ata_read_log_page(dev, ATA_LOG_DIRECTORY, 0, ap->sector_buf, 1))
 		return false;
 	return get_unaligned_le16(&ap->sector_buf[log * 2]) ? true : false;
@@ -4123,6 +4126,13 @@ static const struct ata_blacklist_entry
 	{ "WDC WD3000JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
 	{ "WDC WD3200JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
 
+	/*
+	 * This sata dom device goes on a walkabout when the ATA_LOG_DIRECTORY
+	 * log page is accessed. Ensure we never ask for this log page with
+	 * these devices.
+	 */
+	{ "SATADOM-ML 3ME",		NULL,	ATA_HORKAGE_NO_LOG_DIR },
+
 	/* End Marker */
 	{ }
 };
include/linux/libata.h +1 -0
@@ -428,6 +428,7 @@ enum {
 	ATA_HORKAGE_MAX_TRIM_128M = (1 << 26),	/* Limit max trim size to 128M */
 	ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27),	/* Disable NCQ on ATI chipset */
 	ATA_HORKAGE_NO_ID_DEV_LOG = (1 << 28),	/* Identify device log missing */
+	ATA_HORKAGE_NO_LOG_DIR	= (1 << 29),	/* Do not read log directory */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
author maintainer
#18 lore raw

PATCH 18/126 btrfs: dont start transaction for scrub if the fs is mounted read-only

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

commit 2d192fc4c1abeb0d04d1c8cd54405ff4a0b0255b upstream.

[BUG]
The following super simple script would crash btrfs at unmount time, if CONFIG_BTRFS_ASSERT() is set.

mkfs.btrfs -f $dev
mount $dev $mnt
xfs_io -f -c "pwrite 0 4k" $mnt/file
umount $mnt
mount -r ro $dev $mnt
btrfs scrub start -Br $mnt
umount $mnt

This will trigger the following ASSERT() introduced by commit 0a31daa4b602 ("btrfs: add assertion for empty list of transactions at late stage of umount").

That patch is definitely not the cause, it just makes enough noise for developers.

[CAUSE]
We will start transaction for the following call chain during scrub:

scrub_enumerate_chunks()
|- btrfs_inc_block_group_ro()
|- btrfs_join_transaction()

However for RO mount, there is no running transaction at all, thus btrfs_join_transaction() will start a new transaction.

Furthermore, since it's read-only mount, btrfs_sync_fs() will not call btrfs_commit_super() to commit the new but empty transaction.

And leads to the ASSERT().

The bug has been there for a long time. Only the new ASSERT() makes it noisy enough to be noticed.

[FIX]
For read-only scrub on read-only mount, there is no need to start a transaction nor to allocate new chunks in btrfs_inc_block_group_ro().

Just do extra read-only mount check in btrfs_inc_block_group_ro(), and if it's read-only, skip all chunk allocation and go inc_block_group_ro() directly.

---
 fs/btrfs/block-group.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
fs/btrfs/block-group.c +13 -0
@@ -2547,6 +2547,19 @@ int btrfs_inc_block_group_ro(struct btrf
 	int ret;
 	bool dirty_bg_running;
 
+	/*
+	 * This can only happen when we are doing read-only scrub on read-only
+	 * mount.
+	 * In that case we should not start a new transaction on read-only fs.
+	 * Thus here we skip all chunk allocations.
+	 */
+	if (sb_rdonly(fs_info->sb)) {
+		mutex_lock(&fs_info->ro_block_group_mutex);
+		ret = inc_block_group_ro(cache, 0);
+		mutex_unlock(&fs_info->ro_block_group_mutex);
+		return ret;
+	}
+
 	do {
 		trans = btrfs_join_transaction(fs_info->extent_root);
 		if (IS_ERR(trans))
author maintainer
#19 lore raw

PATCH 19/126 btrfs: fix deadlock between quota disable and qgroup rescan worker

In reply to Greg Kroah-Hartman

From: Shin'ichiro Kawasaki <[email protected]>

commit e804861bd4e69cc5fe1053eedcb024982dde8e48 upstream.

Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task.

The deadlock happens with the steps following:

1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes.
2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A.
3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed.

This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices.

An example report of the deadlock:

  [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds.
  [372.479944]       Not tainted 5.16.0-rc8 #7
  [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.493898] task:kworker/u16:6   state:D stack:    0 pid:  103 ppid:     2 flags:0x00004000
  [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs]
  [372.510782] Call Trace:
  [372.514092]  <TASK>
  [372.521684]  __schedule+0xb56/0x4850
  [372.530104]  ? io_schedule_timeout+0x190/0x190
  [372.538842]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.547092]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.555591]  schedule+0xe0/0x270
  [372.561894]  btrfs_commit_transaction+0x18bb/0x2610 [btrfs]
  [372.570506]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [372.578875]  ? free_unref_page+0x3f2/0x650
  [372.585484]  ? finish_wait+0x270/0x270
  [372.591594]  ? release_extent_buffer+0x224/0x420 [btrfs]
  [372.599264]  btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs]
  [372.607157]  ? lock_release+0x3a9/0x6d0
  [372.613054]  ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs]
  [372.620960]  ? do_raw_spin_lock+0x11e/0x250
  [372.627137]  ? rwlock_bug.part.0+0x90/0x90
  [372.633215]  ? lock_is_held_type+0xe4/0x140
  [372.639404]  btrfs_work_helper+0x1ae/0xa90 [btrfs]
  [372.646268]  process_one_work+0x7e9/0x1320
  [372.652321]  ? lock_release+0x6d0/0x6d0
  [372.658081]  ? pwq_dec_nr_in_flight+0x230/0x230
  [372.664513]  ? rwlock_bug.part.0+0x90/0x90
  [372.670529]  worker_thread+0x59e/0xf90
  [372.676172]  ? process_one_work+0x1320/0x1320
  [372.682440]  kthread+0x3b9/0x490
  [372.687550]  ? _raw_spin_unlock_irq+0x24/0x50
  [372.693811]  ? set_kthread_struct+0x100/0x100
  [372.700052]  ret_from_fork+0x22/0x30
  [372.705517]  </TASK>
  [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds.
  [372.729827]       Not tainted 5.16.0-rc8 #7
  [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.767106] task:btrfs-transacti state:D stack:    0 pid: 2347 ppid:     2 flags:0x00004000
  [372.787776] Call Trace:
  [372.801652]  <TASK>
  [372.812961]  __schedule+0xb56/0x4850
  [372.830011]  ? io_schedule_timeout+0x190/0x190
  [372.852547]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.871761]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.886792]  schedule+0xe0/0x270
  [372.901685]  wait_current_trans+0x22c/0x310 [btrfs]
  [372.919743]  ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs]
  [372.938923]  ? finish_wait+0x270/0x270
  [372.959085]  ? join_transaction+0xc75/0xe30 [btrfs]
  [372.977706]  start_transaction+0x938/0x10a0 [btrfs]
  [372.997168]  transaction_kthread+0x19d/0x3c0 [btrfs]
  [373.013021]  ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs]
  [373.031678]  kthread+0x3b9/0x490
  [373.047420]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.064645]  ? set_kthread_struct+0x100/0x100
  [373.078571]  ret_from_fork+0x22/0x30
  [373.091197]  </TASK>
  [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds.
  [373.114147]       Not tainted 5.16.0-rc8 #7
  [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.130393] task:btrfs           state:D stack:    0 pid: 3145 ppid:  3141 flags:0x00004000
  [373.140998] Call Trace:
  [373.145501]  <TASK>
  [373.149654]  __schedule+0xb56/0x4850
  [373.155306]  ? io_schedule_timeout+0x190/0x190
  [373.161965]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.168469]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [373.175468]  schedule+0xe0/0x270
  [373.180814]  wait_for_commit+0x104/0x150 [btrfs]
  [373.187643]  ? test_and_set_bit+0x20/0x20 [btrfs]
  [373.194772]  ? kmem_cache_free+0x124/0x550
  [373.201191]  ? btrfs_put_transaction+0x69/0x3d0 [btrfs]
  [373.208738]  ? finish_wait+0x270/0x270
  [373.214704]  ? __btrfs_end_transaction+0x347/0x7b0 [btrfs]
  [373.222342]  btrfs_commit_transaction+0x44d/0x2610 [btrfs]
  [373.230233]  ? join_transaction+0x255/0xe30 [btrfs]
  [373.237334]  ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs]
  [373.245251]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [373.253296]  relocate_block_group+0x105/0xc20 [btrfs]
  [373.260533]  ? mutex_lock_io_nested+0x1270/0x1270
  [373.267516]  ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs]
  [373.275155]  ? merge_reloc_roots+0x710/0x710 [btrfs]
  [373.283602]  ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs]
  [373.291934]  ? kmem_cache_free+0x124/0x550
  [373.298180]  btrfs_relocate_block_group+0x35c/0x930 [btrfs]
  [373.306047]  btrfs_relocate_chunk+0x85/0x210 [btrfs]
  [373.313229]  btrfs_balance+0x12f4/0x2d20 [btrfs]
  [373.320227]  ? lock_release+0x3a9/0x6d0
  [373.326206]  ? btrfs_relocate_chunk+0x210/0x210 [btrfs]
  [373.333591]  ? lock_is_held_type+0xe4/0x140
  [373.340031]  ? rcu_read_lock_sched_held+0x3f/0x70
  [373.346910]  btrfs_ioctl_balance+0x548/0x700 [btrfs]
  [373.354207]  btrfs_ioctl+0x7f2/0x71b0 [btrfs]
  [373.360774]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.367957]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.375327]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.383841]  ? find_held_lock+0x2c/0x110
  [373.389993]  ? lock_release+0x3a9/0x6d0
  [373.395828]  ? mntput_no_expire+0xf7/0xad0
  [373.402083]  ? lock_is_held_type+0xe4/0x140
  [373.408249]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.414486]  ? selinux_file_ioctl+0x349/0x4e0
  [373.420938]  ? trace_raw_output_lock+0xb4/0xe0
  [373.427442]  ? selinux_inode_getsecctx+0x80/0x80
  [373.434224]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.440660]  ? force_qs_rnp+0x2a0/0x6b0
  [373.446534]  ? lock_is_held_type+0x9b/0x140
  [373.452763]  ? __blkcg_punt_bio_submit+0x1b0/0x1b0
  [373.459732]  ? security_file_ioctl+0x50/0x90
  [373.466089]  __x64_sys_ioctl+0x127/0x190
  [373.472022]  do_syscall_64+0x3b/0x90
  [373.477513]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.484823] RIP: 0033:0x7f8f4af7e2bb
  [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb
  [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003
  [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0
  [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001
  [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002
  [373.546506]  </TASK>
  [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds.
  [373.559383]       Not tainted 5.16.0-rc8 #7
  [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.575748] task:btrfs           state:D stack:    0 pid: 3146 ppid:  2168 flags:0x00000000
  [373.586314] Call Trace:
  [373.590846]  <TASK>
  [373.595121]  __schedule+0xb56/0x4850
  [373.600901]  ? __lock_acquire+0x23db/0x5030
  [373.607176]  ? io_schedule_timeout+0x190/0x190
  [373.613954]  schedule+0xe0/0x270
  [373.619157]  schedule_timeout+0x168/0x220
  [373.625170]  ? usleep_range_state+0x150/0x150
  [373.631653]  ? mark_held_locks+0x9e/0xe0
  [373.637767]  ? do_raw_spin_lock+0x11e/0x250
  [373.643993]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
  [373.651267]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.657677]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.664103]  wait_for_completion+0x163/0x250
  [373.670437]  ? bit_wait_timeout+0x160/0x160
  [373.676585]  btrfs_quota_disable+0x176/0x9a0 [btrfs]
  [373.683979]  ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs]
  [373.691340]  ? down_write+0xd0/0x130
  [373.696880]  ? down_write_killable+0x150/0x150
  [373.703352]  btrfs_ioctl+0x3945/0x71b0 [btrfs]
  [373.710061]  ? find_held_lock+0x2c/0x110
  [373.716192]  ? lock_release+0x3a9/0x6d0
  [373.722047]  ? __handle_mm_fault+0x23cd/0x3050
  [373.728486]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.737032]  ? set_pte+0x6a/0x90
  [373.742271]  ? do_raw_spin_unlock+0x55/0x1f0
  [373.748506]  ? lock_is_held_type+0xe4/0x140
  [373.754792]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.761083]  ? selinux_file_ioctl+0x349/0x4e0
  [373.767521]  ? selinux_inode_getsecctx+0x80/0x80
  [373.774247]  ? __up_read+0x182/0x6e0
  [373.780026]  ? count_memcg_events.constprop.0+0x46/0x60
  [373.787281]  ? up_write+0x460/0x460
  [373.792932]  ? security_file_ioctl+0x50/0x90
  [373.799232]  __x64_sys_ioctl+0x127/0x190
  [373.805237]  do_syscall_64+0x3b/0x90
  [373.810947]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.818102] RIP: 0033:0x7f1383ea02bb
  [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb
  [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003
  [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
  [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a
  [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000
  [373.879838]  </TASK>
  [373.884018]
               Showing all locks held in the system:
  [373.894250] 3 locks held by kworker/4:1/58:
  [373.900356] 1 lock held by khungtaskd/63:
  [373.906333]  #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260
  [373.917307] 3 locks held by kworker/u16:6/103:
  [373.923938]  #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320
  [373.936555]  #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320
  [373.951109]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs]
  [373.964027] 2 locks held by less/1803:
  [373.969982]  #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80
  [373.981295]  #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060
  [373.992969] 1 lock held by btrfs-transacti/2347:
  [373.999893]  #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs]
  [374.015872] 3 locks held by btrfs/3145:
  [374.022298]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs]
  [374.034456]  #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs]
  [374.047646]  #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs]
  [374.063295] 4 locks held by btrfs/3146:
  [374.069647]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs]
  [374.081601]  #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs]
  [374.094283]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs]
  [374.106885]  #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs]
  [374.126780] =============================================

To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem.

Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed.

---
 fs/btrfs/qgroup.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)
fs/btrfs/qgroup.c +19 -2
@@ -1185,9 +1185,24 @@ int btrfs_quota_disable(struct btrfs_fs_
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
+	/*
+	 * We need to have subvol_sem write locked, to prevent races between
+	 * concurrent tasks trying to disable quotas, because we will unlock
+	 * and relock qgroup_ioctl_lock across BTRFS_FS_QUOTA_ENABLED changes.
+	 */
+	lockdep_assert_held_write(&fs_info->subvol_sem);
+
 	mutex_lock(&fs_info->qgroup_ioctl_lock);
 	if (!fs_info->quota_root)
 		goto out;
+
+	/*
+	 * Request qgroup rescan worker to complete and wait for it. This wait
+	 * must be done before transaction start for quota disable since it may
+	 * deadlock with transaction by the qgroup rescan worker.
+	 */
+	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
+	btrfs_qgroup_wait_for_completion(fs_info, false);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 
 	/*
@@ -1205,14 +1220,13 @@ int btrfs_quota_disable(struct btrfs_fs_
 	if (IS_ERR(trans)) {
 		ret = PTR_ERR(trans);
 		trans = NULL;
+		set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
 		goto out;
 	}
 
 	if (!fs_info->quota_root)
 		goto out;
 
-	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
-	btrfs_qgroup_wait_for_completion(fs_info, false);
 	spin_lock(&fs_info->qgroup_lock);
 	quota_root = fs_info->quota_root;
 	fs_info->quota_root = NULL;
@@ -3380,6 +3394,9 @@ qgroup_rescan_init(struct btrfs_fs_info
 			btrfs_warn(fs_info,
 			"qgroup rescan init failed, qgroup is not enabled");
 			ret = -EINVAL;
+		} else if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags)) {
+			/* Quota disable is in progress */
+			ret = -EBUSY;
 		}
 
 		if (ret) {
author maintainer
#20 lore raw

PATCH 20/126 btrfs: fix use-after-free after failure to create a snapshot

In reply to Greg Kroah-Hartman

From: Filipe Manana <[email protected]>

commit 28b21c558a3753171097193b6f6602a94169093a upstream.

At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot:

1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots;

2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list;

3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free.

This issue could actually be detected by smatch, which produced the following warning:

fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list

So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore.

---
 fs/btrfs/ioctl.c       |    5 +----
 fs/btrfs/transaction.c |   24 ++++++++++++++++++++++++
 fs/btrfs/transaction.h |    2 ++
 3 files changed, 27 insertions(+), 4 deletions(-)
fs/btrfs/ioctl.c +1 -4
@@ -779,10 +779,7 @@ static int create_snapshot(struct btrfs_
 		goto fail;
 	}
 
-	spin_lock(&fs_info->trans_lock);
-	list_add(&pending_snapshot->list,
-		 &trans->transaction->pending_snapshots);
-	spin_unlock(&fs_info->trans_lock);
+	trans->pending_snapshot = pending_snapshot;
 
 	ret = btrfs_commit_transaction(trans);
 	if (ret)
fs/btrfs/transaction.c +24 -0
@@ -2032,6 +2032,27 @@ static inline void btrfs_wait_delalloc_f
 		btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1);
 }
 
+/*
+ * Add a pending snapshot associated with the given transaction handle to the
+ * respective handle. This must be called after the transaction commit started
+ * and while holding fs_info->trans_lock.
+ * This serves to guarantee a caller of btrfs_commit_transaction() that it can
+ * safely free the pending snapshot pointer in case btrfs_commit_transaction()
+ * returns an error.
+ */
+static void add_pending_snapshot(struct btrfs_trans_handle *trans)
+{
+	struct btrfs_transaction *cur_trans = trans->transaction;
+
+	if (!trans->pending_snapshot)
+		return;
+
+	lockdep_assert_held(&trans->fs_info->trans_lock);
+	ASSERT(cur_trans->state >= TRANS_STATE_COMMIT_START);
+
+	list_add(&trans->pending_snapshot->list, &cur_trans->pending_snapshots);
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 {
 	struct btrfs_fs_info *fs_info = trans->fs_info;
@@ -2105,6 +2126,8 @@ int btrfs_commit_transaction(struct btrf
 	if (cur_trans->state >= TRANS_STATE_COMMIT_START) {
 		enum btrfs_trans_state want_state = TRANS_STATE_COMPLETED;
 
+		add_pending_snapshot(trans);
+
 		spin_unlock(&fs_info->trans_lock);
 		refcount_inc(&cur_trans->use_count);
 
@@ -2195,6 +2218,7 @@ int btrfs_commit_transaction(struct btrf
 	 * COMMIT_DOING so make sure to wait for num_writers to == 1 again.
 	 */
 	spin_lock(&fs_info->trans_lock);
+	add_pending_snapshot(trans);
 	cur_trans->state = TRANS_STATE_COMMIT_DOING;
 	spin_unlock(&fs_info->trans_lock);
 	wait_event(cur_trans->writer_wait,
fs/btrfs/transaction.h +2 -0
@@ -123,6 +123,8 @@ struct btrfs_trans_handle {
 	struct btrfs_transaction *transaction;
 	struct btrfs_block_rsv *block_rsv;
 	struct btrfs_block_rsv *orig_rsv;
+	/* Set by a task that wants to create a snapshot. */
+	struct btrfs_pending_snapshot *pending_snapshot;
 	refcount_t use_count;
 	unsigned int type;
 	/*
author maintainer
#21 lore raw

PATCH 21/126 Revert "fs/9p: search open fids first"

In reply to Greg Kroah-Hartman

From: Dominique Martinet <[email protected]>

commit 22e424feb6658c5d6789e45121830357809c59cb upstream.

This reverts commit 478ba09edc1f2f2ee27180a06150cb2d1a686f9c.

That commit was meant as a fix for setattrs with by fd (e.g. ftruncate) to use an open fid instead of the first fid it found on lookup. The proper fix for that is to use the fid associated with the open file struct, available in iattr->ia_file for such operations, and was actually done just before in 66246641609b ("9p: retrieve fid from file when file instance exist.")
As such, this commit is no longer required.

Furthermore, changing lookup to return open fids first had unwanted side effects, as it turns out the protocol forbids the use of open fids for further walks (e.g. clone_fid) and we broke mounts for some servers enforcing this rule.

Note this only reverts to the old working behaviour, but it's still possible for lookup to return open fids if dentry->d_fsdata is not set, so more work is needed to make sure we respect this rule in the future, for example by adding a flag to the lookup functions to only match certain fid open modes depending on caller requirements.

---
 fs/9p/fid.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
fs/9p/fid.c +4 -5
@@ -96,12 +96,8 @@ static struct p9_fid *v9fs_fid_find(stru
 		 dentry, dentry, from_kuid(&init_user_ns, uid),
 		 any);
 	ret = NULL;
-
-	if (d_inode(dentry))
-		ret = v9fs_fid_find_inode(d_inode(dentry), uid);
-
 	/* we'll recheck under lock if there's anything to look in */
-	if (!ret && dentry->d_fsdata) {
+	if (dentry->d_fsdata) {
 		struct hlist_head *h = (struct hlist_head *)&dentry->d_fsdata;
 
 		spin_lock(&dentry->d_lock);
@@ -113,6 +109,9 @@ static struct p9_fid *v9fs_fid_find(stru
 			}
 		}
 		spin_unlock(&dentry->d_lock);
+	} else {
+		if (dentry->d_inode)
+			ret = v9fs_fid_find_inode(dentry->d_inode, uid);
 	}
 
 	return ret;
author maintainer
#22 lore raw

PATCH 22/126 drm/nouveau: fix off by one in BIOS boundary checking

In reply to Greg Kroah-Hartman

From: Nick Lopez <[email protected]>

commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.

Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console.

This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed.

Fixes 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc <[email protected]> # v4.10+
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c +1 -1
@@ -38,7 +38,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 		*addr += bios->imaged_addr;
 	}
 
-	if (unlikely(*addr + size >= bios->size)) {
+	if (unlikely(*addr + size > bios->size)) {
 		nvkm_error(&bios->subdev, "OOB %d %08x %08x\n", size, p, *addr);
 		return false;
 	}
author maintainer
#23 lore raw

PATCH 23/126 drm/i915/adlp: Fix TypeC PHY-ready status readout

In reply to Greg Kroah-Hartman

From: Imre Deak <[email protected]>

commit 3c6f13ad723e7206f03bb2752b01d18202b7fc9d upstream.

The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port index, fix this up. This only caused an issue on TC#3/4 ports in legacy mode, as in all other cases the two indices either match (on TC#1/2) or the TCSS_DDI_STATUS_READY flag is set regardless of something being connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes).

Fixes 55ce306c2aa1 ("drm/i915/adl_p: Implement TC sequences")
Cc José Roberto de Souza <[email protected]>
Cc <[email protected]> # v5.14+
(cherry picked from commit 516b33460c5bee78b2055637b0547bdb0e6af754)
---
 drivers/gpu/drm/i915/display/intel_tc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_tc.c +2 -1
@@ -345,10 +345,11 @@ static bool icl_tc_phy_status_complete(s
 static bool adl_tc_phy_status_complete(struct intel_digital_port *dig_port)
 {
 	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	enum tc_port tc_port = intel_port_to_tc(i915, dig_port->base.port);
 	struct intel_uncore *uncore = &i915->uncore;
 	u32 val;
 
-	val = intel_uncore_read(uncore, TCSS_DDI_STATUS(dig_port->tc_phy_fia_idx));
+	val = intel_uncore_read(uncore, TCSS_DDI_STATUS(tc_port));
 	if (val == 0xffffffff) {
 		drm_dbg_kms(&i915->drm,
 			    "Port %s: PHY in TCCOLD, assuming not complete\n",
author maintainer
#24 lore raw

PATCH 24/126 drm/amdgpu: fix a potential GPU hang on cyan skillfish

In reply to Greg Kroah-Hartman

From: Lang Yu <[email protected]>

commit bca52455a3c07922ee976714b00563a13a29ab15 upstream.

We observed a GPU hang when querying GMC CG state(i.e., cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan skillfish doesn't support any CG features.

Just prevent it from accessing GMC CG registers.

---
 drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c +3 -0
@@ -1147,6 +1147,9 @@ static void gmc_v10_0_get_clockgating_st
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
+	if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 1, 3))
+		return;
+
 	adev->mmhub.funcs->get_clockgating(adev, flags);
 
 	if (adev->ip_versions[ATHUB_HWIP][0] >= IP_VERSION(2, 1, 0))
author maintainer
#25 lore raw

PATCH 25/126 drm/amd/pm: correct the MGpuFanBoost support for Beige Goby

In reply to Greg Kroah-Hartman

From: Evan Quan <[email protected]>

commit 3ec5586b4699cfb75cdfa09425e11d121db40773 upstream.

The existing way cannot handle Beige Goby well as a different PPTable data structure(PPTable_beige_goby_t instead of PPTable_t) is used there.

---
 drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +3 -3
@@ -3681,14 +3681,14 @@ static ssize_t sienna_cichlid_get_gpu_me
 
 static int sienna_cichlid_enable_mgpu_fan_boost(struct smu_context *smu)
 {
-	struct smu_table_context *table_context = &smu->smu_table;
-	PPTable_t *smc_pptable = table_context->driver_pptable;
+	uint16_t *mgpu_fan_boost_limit_rpm;
 
+	GET_PPTABLE_MEMBER(MGpuFanBoostLimitRpm, &mgpu_fan_boost_limit_rpm);
 	/*
 	 * Skip the MGpuFanBoost setting for those ASICs
 	 * which do not support it
 	 */
-	if (!smc_pptable->MGpuFanBoostLimitRpm)
+	if (*mgpu_fan_boost_limit_rpm == 0)
 		return 0;
 
 	return smu_cmn_send_smc_msg_with_param(smu,
author maintainer
#26 lore raw

PATCH 26/126 drm/amd/display: Update watermark values for DCN301

In reply to Greg Kroah-Hartman

From: Agustin Gutierrez <[email protected]>

commit 2d8ae25d233767171942a9fba5fd8f4a620996be upstream.

[Why]
There is underflow / visual corruption DCN301, for high bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60.

[How]
Use up-to-date watermark values for DCN301.

---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c |   16 ++++++-------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c +8 -8
@@ -582,32 +582,32 @@ static struct wm_table lpddr5_wm_table =
 			.wm_inst = WM_A,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.65333,
-			.sr_exit_time_us = 7.95,
-			.sr_enter_plus_exit_time_us = 9,
+			.sr_exit_time_us = 13.5,
+			.sr_enter_plus_exit_time_us = 16.5,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_B,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.65333,
-			.sr_exit_time_us = 9.82,
-			.sr_enter_plus_exit_time_us = 11.196,
+			.sr_exit_time_us = 13.5,
+			.sr_enter_plus_exit_time_us = 16.5,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_C,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.65333,
-			.sr_exit_time_us = 9.89,
-			.sr_enter_plus_exit_time_us = 11.24,
+			.sr_exit_time_us = 13.5,
+			.sr_enter_plus_exit_time_us = 16.5,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_D,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.65333,
-			.sr_exit_time_us = 9.748,
-			.sr_enter_plus_exit_time_us = 11.102,
+			.sr_exit_time_us = 13.5,
+			.sr_enter_plus_exit_time_us = 16.5,
 			.valid = true,
 		},
 	}
author maintainer
#27 lore raw

PATCH 27/126 drm/amd/display: watermark latencies is not enough on DCN31

In reply to Greg Kroah-Hartman

From: Paul Hsieh <[email protected]>

commit f5fa54f45ab41cbb1f99b1208f49554132ffb207 upstream.

[Why]
The original latencies were causing underflow in some modes.
Resolution: 2880x1620@60p when HDR enable

[How]
1. Replace with the up-to-date watermark values based on new measurments
2. Correct the ddr_wm_table name to DDR5 on DCN31

---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c |   20 +++++------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c +10 -10
@@ -329,38 +329,38 @@ static struct clk_bw_params dcn31_bw_par
 
 };
 
-static struct wm_table ddr4_wm_table = {
+static struct wm_table ddr5_wm_table = {
 	.entries = {
 		{
 			.wm_inst = WM_A,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.72,
-			.sr_exit_time_us = 6.09,
-			.sr_enter_plus_exit_time_us = 7.14,
+			.sr_exit_time_us = 9,
+			.sr_enter_plus_exit_time_us = 11,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_B,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.72,
-			.sr_exit_time_us = 10.12,
-			.sr_enter_plus_exit_time_us = 11.48,
+			.sr_exit_time_us = 9,
+			.sr_enter_plus_exit_time_us = 11,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_C,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.72,
-			.sr_exit_time_us = 10.12,
-			.sr_enter_plus_exit_time_us = 11.48,
+			.sr_exit_time_us = 9,
+			.sr_enter_plus_exit_time_us = 11,
 			.valid = true,
 		},
 		{
 			.wm_inst = WM_D,
 			.wm_type = WM_TYPE_PSTATE_CHG,
 			.pstate_latency_us = 11.72,
-			.sr_exit_time_us = 10.12,
-			.sr_enter_plus_exit_time_us = 11.48,
+			.sr_exit_time_us = 9,
+			.sr_enter_plus_exit_time_us = 11,
 			.valid = true,
 		},
 	}
@@ -688,7 +688,7 @@ void dcn31_clk_mgr_construct(
 		if (ctx->dc_bios->integrated_info->memory_type == LpDdr5MemType) {
 			dcn31_bw_params.wm_table = lpddr5_wm_table;
 		} else {
-			dcn31_bw_params.wm_table = ddr4_wm_table;
+			dcn31_bw_params.wm_table = ddr5_wm_table;
 		}
 		/* Saved clocks configured at boot for debug purposes */
 		 dcn31_dump_clk_registers(&clk_mgr->base.base.boot_snapshot, &clk_mgr->base.base, &log_info);
author maintainer
#28 lore raw

PATCH 28/126 drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels

In reply to Greg Kroah-Hartman

From: Aun-Ali Zaidi <[email protected]>

commit 30fbce374745a9c6af93c775a5ac49a97f822fda upstream.

The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results in no display modes being found and a dark panel.

For now, simply force the maximum supported link rate for the eDP attached 2018 15" Apple Retina panels.

Additionally, we must also check the firmware revision since the device ID reported by the DPCD is identical to that of the more capable 16,1, incorrectly quirking it. We also use said firmware check to quirk the refreshed 15,1 models with Vega graphics as they use a slightly newer firmware version.

---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +20 -0
@@ -4730,6 +4730,26 @@ static bool retrieve_link_cap(struct dc_
 		dp_hw_fw_revision.ieee_fw_rev,
 		sizeof(dp_hw_fw_revision.ieee_fw_rev));
 
+	/* Quirk for Apple MBP 2018 15" Retina panels: wrong DP_MAX_LINK_RATE */
+	{
+		uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 };
+		uint8_t fwrev_mbp_2018[] = { 7, 4 };
+		uint8_t fwrev_mbp_2018_vega[] = { 8, 4 };
+
+		/* We also check for the firmware revision as 16,1 models have an
+		 * identical device id and are incorrectly quirked otherwise.
+		 */
+		if ((link->dpcd_caps.sink_dev_id == 0x0010fa) &&
+		    !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018,
+			     sizeof(str_mbp_2018)) &&
+		    (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018,
+			     sizeof(fwrev_mbp_2018)) ||
+		    !memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018_vega,
+			     sizeof(fwrev_mbp_2018_vega)))) {
+			link->reported_link_cap.link_rate = LINK_RATE_RBR2;
+		}
+	}
+
 	memset(&link->dpcd_caps.dsc_caps, '\0',
 			sizeof(link->dpcd_caps.dsc_caps));
 	memset(&link->dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap));
author maintainer
#29 lore raw

PATCH 29/126 nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()

In reply to Greg Kroah-Hartman

From: Uday Shankar <[email protected]>

commit 6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream.

Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller.

In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request.

When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request.

Correct by adding the DELETING_NIO state to the match checks.

Fixes ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc <[email protected]> # v5.7+
---
 drivers/nvme/host/fabrics.h |    1 +
 1 file changed, 1 insertion(+)
drivers/nvme/host/fabrics.h +1 -0
@@ -170,6 +170,7 @@ nvmf_ctlr_matches_baseopts(struct nvme_c
 			struct nvmf_ctrl_options *opts)
 {
 	if (ctrl->state == NVME_CTRL_DELETING ||
+	    ctrl->state == NVME_CTRL_DELETING_NOIO ||
 	    ctrl->state == NVME_CTRL_DEAD ||
 	    strcmp(opts->subsysnqn, ctrl->opts->subsysnqn) ||
 	    strcmp(opts->host->nqn, ctrl->opts->host->nqn) ||
author maintainer
#30 lore raw

PATCH 30/126 mm/debug_vm_pgtable: remove pte entry from the page table

In reply to Greg Kroah-Hartman

From: Pasha Tatashin <[email protected]>

commit fb5222aae64fe25e5f3ebefde8214dcf3ba33ca5 upstream.

Patch series "page table check fixes and cleanups", v5.

This patch (of 4):

The pte entry that is used in pte_advanced_tests() is never removed from the page table at the end of the test.

The issue is detected by page_table_check, to repro compile kernel with the following configs:

CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y

During the boot the following BUG is printed:

debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers

  ------------[ cut here ]------------
  kernel BUG at mm/page_table_check.c:162!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  ...

The entry should be properly removed from the page table before the page is released to the free list.

Fixes a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Cc Paul Turner <[email protected]>
Cc Wei Xu <[email protected]>
Cc Greg Thelen <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Will Deacon <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Dave Hansen <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Aneesh Kumar K.V <[email protected]>
Cc Jiri Slaby <[email protected]>
Cc Muchun Song <[email protected]>
Cc Hugh Dickins <[email protected]>
Cc <[email protected]> [5.9+]
---
 mm/debug_vm_pgtable.c |    2 ++
 1 file changed, 2 insertions(+)
mm/debug_vm_pgtable.c +2 -0
@@ -171,6 +171,8 @@ static void __init pte_advanced_tests(st
 	ptep_test_and_clear_young(args->vma, args->vaddr, args->ptep);
 	pte = ptep_get(args->ptep);
 	WARN_ON(pte_young(pte));
+
+	ptep_get_and_clear_full(args->mm, args->vaddr, args->ptep, 1);
 }
 
 static void __init pte_savedwrite_tests(struct pgtable_debug_args *args)
author maintainer
#31 lore raw

PATCH 31/126 mm/pgtable: define pte_index so that preprocessor could recognize it

In reply to Greg Kroah-Hartman

From: Mike Rapoport <[email protected]>

commit 314c459a6fe0957b5885fbc65c53d51444092880 upstream.

Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") pte_index is a static inline and there is no define for it that can be recognized by the preprocessor. As a result, vm_insert_pages() uses slower loop over vm_insert_page() instead of insert_pages() that amortizes the cost of spinlock operations when inserting multiple pages.

---
 include/linux/pgtable.h |    1 +
 1 file changed, 1 insertion(+)
include/linux/pgtable.h +1 -0
@@ -62,6 +62,7 @@ static inline unsigned long pte_index(un
 {
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
 }
+#define pte_index pte_index
 
 #ifndef pmd_index
 static inline unsigned long pmd_index(unsigned long address)
author maintainer
#32 lore raw

PATCH 32/126 mm/kmemleak: avoid scanning potential huge holes

In reply to Greg Kroah-Hartman

From: Lang Yu <[email protected]>

commit c10a0f877fe007021d70f9cada240f42adc2b5db upstream.

When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn().

We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole.

  for (pfn = start_pfn; pfn < end_pfn; pfn++) {
	struct page *page = pfn_to_online_page(pfn);
		if (!page)
			continue;
	...

}

So we got a soft lockup:

  watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
  CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
  RIP: 0010:pfn_to_online_page+0x5/0xd0
  Call Trace:
    ? kmemleak_scan+0x16a/0x440
    kmemleak_write+0x306/0x3a0
    ? common_file_perm+0x72/0x170
    full_proxy_write+0x5c/0x90
    vfs_write+0xb9/0x260
    ksys_write+0x67/0xe0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x3b/0xc0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

I did some tests with the patch.

(1) amdgpu module unloaded

before the patch:

  real    0m0.976s
  user    0m0.000s
  sys     0m0.968s

after the patch:

  real    0m0.981s
  user    0m0.000s
  sys     0m0.973s

(2) amdgpu module loaded

before the patch:

  real    0m35.365s
  user    0m0.000s
  sys     0m35.354s

after the patch:

  real    0m1.049s
  user    0m0.000s
  sys     0m1.042s
---
 mm/kmemleak.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
mm/kmemleak.c +7 -6
@@ -1403,7 +1403,8 @@ static void kmemleak_scan(void)
 {
 	unsigned long flags;
 	struct kmemleak_object *object;
-	int i;
+	struct zone *zone;
+	int __maybe_unused i;
 	int new_leaks = 0;
 
 	jiffies_last_scan = jiffies;
@@ -1443,9 +1444,9 @@ static void kmemleak_scan(void)
 	 * Struct page scanning for each node.
 	 */
 	get_online_mems();
-	for_each_online_node(i) {
-		unsigned long start_pfn = node_start_pfn(i);
-		unsigned long end_pfn = node_end_pfn(i);
+	for_each_populated_zone(zone) {
+		unsigned long start_pfn = zone->zone_start_pfn;
+		unsigned long end_pfn = zone_end_pfn(zone);
 		unsigned long pfn;
 
 		for (pfn = start_pfn; pfn < end_pfn; pfn++) {
@@ -1454,8 +1455,8 @@ static void kmemleak_scan(void)
 			if (!page)
 				continue;
 
-			/* only scan pages belonging to this node */
-			if (page_to_nid(page) != i)
+			/* only scan pages belonging to this zone */
+			if (page_zone(page) != zone)
 				continue;
 			/* only scan if page is in use */
 			if (page_count(page) == 0)
author maintainer
#33 lore raw

PATCH 33/126 block: bio-integrity: Advance seed correctly for larger interval sizes

In reply to Greg Kroah-Hartman

From: Martin K. Petersen <[email protected]>

commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks.

The seed value should be advanced by bio_integrity_intervals() and not the number of sectors.

Cc Dmitry Monakhov <[email protected]>
Fixes 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
---
 block/bio-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
block/bio-integrity.c +1 -1
@@ -373,7 +373,7 @@ void bio_integrity_advance(struct bio *b
 	struct blk_integrity *bi = blk_get_integrity(bio->bi_bdev->bd_disk);
 	unsigned bytes = bio_integrity_bytes(bi, bytes_done >> 9);
 
-	bip->bip_iter.bi_sector += bytes_done >> 9;
+	bip->bip_iter.bi_sector += bio_integrity_intervals(bi, bytes_done >> 9);
 	bvec_iter_advance(bip->bip_vec, &bip->bip_iter, bytes);
 }
 
author maintainer
#34 lore raw

PATCH 34/126 cifs: fix workstation_name for multiuser mounts

In reply to Greg Kroah-Hartman

From: Ryan Bair <[email protected]>

commit d3b331fb51f326d5b5326010bf2b5841bb86cdc6 upstream.

Set workstation_name from the master_tcon for multiuser mounts.

Just in case, protect size_of_ntlmssp_blob against a NULL workstation_name.

Fixes 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup")
---
 fs/cifs/connect.c |   13 +++++++++++++
 fs/cifs/sess.c    |    6 +++++-
 2 files changed, 18 insertions(+), 1 deletion(-)
fs/cifs/connect.c +13 -0
@@ -1945,6 +1945,19 @@ cifs_set_cifscreds(struct smb3_fs_contex
 		}
 	}
 
+	ctx->workstation_name = kstrdup(ses->workstation_name, GFP_KERNEL);
+	if (!ctx->workstation_name) {
+		cifs_dbg(FYI, "Unable to allocate memory for workstation_name\n");
+		rc = -ENOMEM;
+		kfree(ctx->username);
+		ctx->username = NULL;
+		kfree_sensitive(ctx->password);
+		ctx->password = NULL;
+		kfree(ctx->domainname);
+		ctx->domainname = NULL;
+		goto out_key_put;
+	}
+
 out_key_put:
 	up_read(&key->sem);
 	key_put(key);
fs/cifs/sess.c +5 -1
@@ -675,7 +675,11 @@ static int size_of_ntlmssp_blob(struct c
 	else
 		sz += sizeof(__le16);
 
-	sz += sizeof(__le16) * strnlen(ses->workstation_name, CIFS_MAX_WORKSTATION_LEN);
+	if (ses->workstation_name)
+		sz += sizeof(__le16) * strnlen(ses->workstation_name,
+			CIFS_MAX_WORKSTATION_LEN);
+	else
+		sz += sizeof(__le16);
 
 	return sz;
 }
author maintainer
#35 lore raw

PATCH 35/126 dma-buf: heaps: Fix potential spectre v1 gadget

In reply to Greg Kroah-Hartman

From: Jordy Zomer <[email protected]>

commit 92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream.

It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec.

Fixes c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Cc <[email protected]> # v5.6+
[sumits: added fixes and cc: stable tags]
---
 drivers/dma-buf/dma-heap.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/dma-buf/dma-heap.c +2 -0
@@ -14,6 +14,7 @@
 #include <linux/xarray.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
 #include <linux/dma-heap.h>
@@ -135,6 +136,7 @@ static long dma_heap_ioctl(struct file *
 	if (nr >= ARRAY_SIZE(dma_heap_ioctl_cmds))
 		return -EINVAL;
 
+	nr = array_index_nospec(nr, ARRAY_SIZE(dma_heap_ioctl_cmds));
 	/* Get the kernel ioctl cmd that matches */
 	kcmd = dma_heap_ioctl_cmds[nr];
 
author maintainer
#36 lore raw

PATCH 36/126 IB/hfi1: Fix panic with larger ipoib send_queue_size

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit 8c83d39cc730378bbac64d67a551897b203a606e upstream.

When the ipoib send_queue_size is increased from the default the following panic happens:

  RIP: 0010:hfi1_ipoib_drain_tx_ring+0x45/0xf0 [hfi1]
  Code: 31 e4 eb 0f 8b 85 c8 02 00 00 41 83 c4 01 44 39 e0 76 60 8b 8d cc 02 00 00 44 89 e3 be 01 00 00 00 d3 e3 48 03 9d c0 02 00 00 <c7> 83 18 01 00 00 00 00 00 00 48 8b bb 30 01 00 00 e8 25 af a7 e0
  RSP: 0018:ffffc9000798f4a0 EFLAGS: 00010286
  RAX: 0000000000008000 RBX: ffffc9000aa0f000 RCX: 000000000000000f
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
  RBP: ffff88810ff08000 R08: ffff88889476d900 R09: 0000000000000101
  R10: 0000000000000000 R11: ffffc90006590ff8 R12: 0000000000000200
  R13: ffffc9000798fba8 R14: 0000000000000000 R15: 0000000000000001
  FS:  00007fd0f79cc3c0(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffc9000aa0f118 CR3: 0000000889c84001 CR4: 00000000001706e0
  Call Trace:
   <TASK>
   hfi1_ipoib_napi_tx_disable+0x45/0x60 [hfi1]
   hfi1_ipoib_dev_stop+0x18/0x80 [hfi1]
   ipoib_ib_dev_stop+0x1d/0x40 [ib_ipoib]
   ipoib_stop+0x48/0xc0 [ib_ipoib]
   __dev_close_many+0x9e/0x110
   __dev_change_flags+0xd9/0x210
   dev_change_flags+0x21/0x60
   do_setlink+0x31c/0x10f0
   ? __nla_validate_parse+0x12d/0x1a0
   ? __nla_parse+0x21/0x30
   ? inet6_validate_link_af+0x5e/0xf0
   ? cpumask_next+0x1f/0x20
   ? __snmp6_fill_stats64.isra.53+0xbb/0x140
   ? __nla_validate_parse+0x47/0x1a0
   __rtnl_newlink+0x530/0x910
   ? pskb_expand_head+0x73/0x300
   ? __kmalloc_node_track_caller+0x109/0x280
   ? __nla_put+0xc/0x20
   ? cpumask_next_and+0x20/0x30
   ? update_sd_lb_stats.constprop.144+0xd3/0x820
   ? _raw_spin_unlock_irqrestore+0x25/0x37
   ? __wake_up_common_lock+0x87/0xc0
   ? kmem_cache_alloc_trace+0x3d/0x3d0
   rtnl_newlink+0x43/0x60

The issue happens when the shift that should have been a function of the txq item size mistakenly used the ring size.

Fix by using the item size.

---
 drivers/infiniband/hw/hfi1/ipoib_tx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/hfi1/ipoib_tx.c +1 -1
@@ -731,7 +731,7 @@ int hfi1_ipoib_txreq_init(struct hfi1_ip
 			goto free_txqs;
 
 		txq->tx_ring.max_items = tx_ring_size;
-		txq->tx_ring.shift = ilog2(tx_ring_size);
+		txq->tx_ring.shift = ilog2(tx_item_size);
 		txq->tx_ring.avail = hfi1_ipoib_ring_hwat(txq);
 
 		netif_tx_napi_add(dev, &txq->napi,
author maintainer
#37 lore raw

PATCH 37/126 IB/hfi1: Fix alloc failure with larger txqueuelen

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit b1151b74ff68cc83c2a8e1a618efe7d056e4f237 upstream.

The following allocation with large txqueuelen will result in the following warning:

  Call Trace:
   __alloc_pages_nodemask+0x283/0x2c0
   kmalloc_large_node+0x3c/0xa0
   __kmalloc_node+0x22a/0x2f0
   hfi1_ipoib_txreq_init+0x19f/0x330 [hfi1]
   hfi1_ipoib_setup_rn+0xd3/0x1a0 [hfi1]
   rdma_init_netdev+0x5a/0x80 [ib_core]
   ipoib_intf_init+0x6c/0x350 [ib_ipoib]
   ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib]
   ipoib_add_one+0xbe/0x300 [ib_ipoib]
   add_client_context+0x12c/0x1a0 [ib_core]
   ib_register_client+0x147/0x190 [ib_core]
   ipoib_init_module+0xdd/0x132 [ib_ipoib]
   do_one_initcall+0x46/0x1c3
   do_init_module+0x5a/0x220
   load_module+0x14c5/0x17f0
   __do_sys_init_module+0x13b/0x180
   do_syscall_64+0x5b/0x1a0
   entry_SYSCALL_64_after_hwframe+0x65/0xca

For ipoib, the txqueuelen is modified with the module parameter send_queue_size.

Fix by changing to use kv versions of the same allocator to handle the large allocations. The allocation embeds a hdr struct that is dma mapped. Change that struct to a pointer to a kzalloced struct.

---
 drivers/infiniband/hw/hfi1/ipoib.h    |    2 -
 drivers/infiniband/hw/hfi1/ipoib_tx.c |   36 +++++++++++++++++++++++-----------
 2 files changed, 26 insertions(+), 12 deletions(-)
drivers/infiniband/hw/hfi1/ipoib.h +1 -1
@@ -55,7 +55,7 @@ union hfi1_ipoib_flow {
  */
 struct ipoib_txreq {
 	struct sdma_txreq           txreq;
-	struct hfi1_sdma_header     sdma_hdr;
+	struct hfi1_sdma_header     *sdma_hdr;
 	int                         sdma_status;
 	int                         complete;
 	struct hfi1_ipoib_dev_priv *priv;
drivers/infiniband/hw/hfi1/ipoib_tx.c +25 -11
@@ -122,7 +122,7 @@ static void hfi1_ipoib_free_tx(struct ip
 		dd_dev_warn(priv->dd,
 			    "%s: Status = 0x%x pbc 0x%llx txq = %d sde = %d\n",
 			    __func__, tx->sdma_status,
-			    le64_to_cpu(tx->sdma_hdr.pbc), tx->txq->q_idx,
+			    le64_to_cpu(tx->sdma_hdr->pbc), tx->txq->q_idx,
 			    tx->txq->sde->this_idx);
 	}
 
@@ -231,7 +231,7 @@ static int hfi1_ipoib_build_tx_desc(stru
 {
 	struct hfi1_devdata *dd = txp->dd;
 	struct sdma_txreq *txreq = &tx->txreq;
-	struct hfi1_sdma_header *sdma_hdr = &tx->sdma_hdr;
+	struct hfi1_sdma_header *sdma_hdr = tx->sdma_hdr;
 	u16 pkt_bytes =
 		sizeof(sdma_hdr->pbc) + (txp->hdr_dwords << 2) + tx->skb->len;
 	int ret;
@@ -256,7 +256,7 @@ static void hfi1_ipoib_build_ib_tx_heade
 					   struct ipoib_txparms *txp)
 {
 	struct hfi1_ipoib_dev_priv *priv = tx->txq->priv;
-	struct hfi1_sdma_header *sdma_hdr = &tx->sdma_hdr;
+	struct hfi1_sdma_header *sdma_hdr = tx->sdma_hdr;
 	struct sk_buff *skb = tx->skb;
 	struct hfi1_pportdata *ppd = ppd_from_ibp(txp->ibp);
 	struct rdma_ah_attr *ah_attr = txp->ah_attr;
@@ -483,7 +483,7 @@ static int hfi1_ipoib_send_dma_single(st
 	if (likely(!ret)) {
 tx_ok:
 		trace_sdma_output_ibhdr(txq->priv->dd,
-					&tx->sdma_hdr.hdr,
+					&tx->sdma_hdr->hdr,
 					ib_is_sc5(txp->flow.sc5));
 		hfi1_ipoib_check_queue_depth(txq);
 		return NETDEV_TX_OK;
@@ -547,7 +547,7 @@ static int hfi1_ipoib_send_dma_list(stru
 	hfi1_ipoib_check_queue_depth(txq);
 
 	trace_sdma_output_ibhdr(txq->priv->dd,
-				&tx->sdma_hdr.hdr,
+				&tx->sdma_hdr->hdr,
 				ib_is_sc5(txp->flow.sc5));
 
 	if (!netdev_xmit_more())
@@ -683,7 +683,8 @@ int hfi1_ipoib_txreq_init(struct hfi1_ip
 {
 	struct net_device *dev = priv->netdev;
 	u32 tx_ring_size, tx_item_size;
-	int i;
+	struct hfi1_ipoib_circ_buf *tx_ring;
+	int i, j;
 
 	/*
 	 * Ring holds 1 less than tx_ring_size
@@ -701,7 +702,9 @@ int hfi1_ipoib_txreq_init(struct hfi1_ip
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct hfi1_ipoib_txq *txq = &priv->txqs[i];
+		struct ipoib_txreq *tx;
 
+		tx_ring = &txq->tx_ring;
 		iowait_init(&txq->wait,
 			    0,
 			    hfi1_ipoib_flush_txq,
@@ -725,14 +728,19 @@ int hfi1_ipoib_txreq_init(struct hfi1_ip
 					     priv->dd->node);
 
 		txq->tx_ring.items =
-			kcalloc_node(tx_ring_size, tx_item_size,
-				     GFP_KERNEL, priv->dd->node);
+			kvzalloc_node(array_size(tx_ring_size, tx_item_size),
+				      GFP_KERNEL, priv->dd->node);
 		if (!txq->tx_ring.items)
 			goto free_txqs;
 
 		txq->tx_ring.max_items = tx_ring_size;
 		txq->tx_ring.shift = ilog2(tx_item_size);
 		txq->tx_ring.avail = hfi1_ipoib_ring_hwat(txq);
+		tx_ring = &txq->tx_ring;
+		for (j = 0; j < tx_ring_size; j++)
+			hfi1_txreq_from_idx(tx_ring, j)->sdma_hdr =
+				kzalloc_node(sizeof(*tx->sdma_hdr),
+					     GFP_KERNEL, priv->dd->node);
 
 		netif_tx_napi_add(dev, &txq->napi,
 				  hfi1_ipoib_poll_tx_ring,
@@ -746,7 +754,10 @@ free_txqs:
 		struct hfi1_ipoib_txq *txq = &priv->txqs[i];
 
 		netif_napi_del(&txq->napi);
-		kfree(txq->tx_ring.items);
+		tx_ring = &txq->tx_ring;
+		for (j = 0; j < tx_ring_size; j++)
+			kfree(hfi1_txreq_from_idx(tx_ring, j)->sdma_hdr);
+		kvfree(tx_ring->items);
 	}
 
 	kfree(priv->txqs);
@@ -780,17 +791,20 @@ static void hfi1_ipoib_drain_tx_list(str
 
 void hfi1_ipoib_txreq_deinit(struct hfi1_ipoib_dev_priv *priv)
 {
-	int i;
+	int i, j;
 
 	for (i = 0; i < priv->netdev->num_tx_queues; i++) {
 		struct hfi1_ipoib_txq *txq = &priv->txqs[i];
+		struct hfi1_ipoib_circ_buf *tx_ring = &txq->tx_ring;
 
 		iowait_cancel_work(&txq->wait);
 		iowait_sdma_drain(&txq->wait);
 		hfi1_ipoib_drain_tx_list(txq);
 		netif_napi_del(&txq->napi);
 		hfi1_ipoib_drain_tx_ring(txq);
-		kfree(txq->tx_ring.items);
+		for (j = 0; j < tx_ring->max_items; j++)
+			kfree(hfi1_txreq_from_idx(tx_ring, j)->sdma_hdr);
+		kvfree(tx_ring->items);
 	}
 
 	kfree(priv->txqs);
author maintainer
#38 lore raw

PATCH 38/126 IB/hfi1: Fix AIP early init panic

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit 5f8f55b92edd621f056bdf09e572092849fabd83 upstream.

An early failure in hfi1_ipoib_setup_rn() can lead to the following panic:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  Workqueue: events work_for_cpu_fn
  RIP: 0010:try_to_grab_pending+0x2b/0x140
  Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c
  RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046
  RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000
  RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0
  RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690
  FS:  0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   __cancel_work_timer+0x42/0x190
   ? dev_printk_emit+0x4e/0x70
   iowait_cancel_work+0x15/0x30 [hfi1]
   hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1]
   ? dev_err+0x6c/0x90
   hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1]
   hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1]
   rdma_init_netdev+0x5a/0x80 [ib_core]
   ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1]
   ipoib_intf_init+0x6c/0x350 [ib_ipoib]
   ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib]
   ipoib_add_one+0xbe/0x300 [ib_ipoib]
   add_client_context+0x12c/0x1a0 [ib_core]
   enable_device_and_get+0xdc/0x1d0 [ib_core]
   ib_register_device+0x572/0x6b0 [ib_core]
   rvt_register_device+0x11b/0x220 [rdmavt]
   hfi1_register_ib_device+0x6b4/0x770 [hfi1]
   do_init_one.isra.20+0x3e3/0x680 [hfi1]
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   ? create_worker+0x1a0/0x1a0
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x116/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x1f/0x40

The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case.

hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly.

Other changes:
- hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev()
- The switch to the accelerated entrances is moved to the success path.

---
 drivers/infiniband/hw/hfi1/ipoib_main.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
drivers/infiniband/hw/hfi1/ipoib_main.c +3 -10
@@ -168,12 +168,6 @@ static void hfi1_ipoib_netdev_dtor(struc
 	free_percpu(dev->tstats);
 }
 
-static void hfi1_ipoib_free_rdma_netdev(struct net_device *dev)
-{
-	hfi1_ipoib_netdev_dtor(dev);
-	free_netdev(dev);
-}
-
 static void hfi1_ipoib_set_id(struct net_device *dev, int id)
 {
 	struct hfi1_ipoib_dev_priv *priv = hfi1_ipoib_priv(dev);
@@ -211,24 +205,23 @@ static int hfi1_ipoib_setup_rn(struct ib
 	priv->port_num = port_num;
 	priv->netdev_ops = netdev->netdev_ops;
 
-	netdev->netdev_ops = &hfi1_ipoib_netdev_ops;
-
 	ib_query_pkey(device, port_num, priv->pkey_index, &priv->pkey);
 
 	rc = hfi1_ipoib_txreq_init(priv);
 	if (rc) {
 		dd_dev_err(dd, "IPoIB netdev TX init - failed(%d)\n", rc);
-		hfi1_ipoib_free_rdma_netdev(netdev);
 		return rc;
 	}
 
 	rc = hfi1_ipoib_rxq_init(netdev);
 	if (rc) {
 		dd_dev_err(dd, "IPoIB netdev RX init - failed(%d)\n", rc);
-		hfi1_ipoib_free_rdma_netdev(netdev);
+		hfi1_ipoib_txreq_deinit(priv);
 		return rc;
 	}
 
+	netdev->netdev_ops = &hfi1_ipoib_netdev_ops;
+
 	netdev->priv_destructor = hfi1_ipoib_netdev_dtor;
 	netdev->needs_free_netdev = true;
 
author maintainer
#39 lore raw

PATCH 39/126 Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 1148836fd3226c20de841084aba24184d4fbbe77 upstream.

This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578.

Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration.

Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling.

This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer.

The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete.

This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon.

The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85).

So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check.

But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case.

That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers.

Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before.

That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers.

There isn't any impact on DRM when reverting those patches.

---
 Documentation/gpu/todo.rst              |   13 
 drivers/video/fbdev/core/bitblit.c      |   16 +
 drivers/video/fbdev/core/fbcon.c        |  509 ++++++++++++++++++++++++++++++--
 drivers/video/fbdev/core/fbcon.h        |   59 +++
 drivers/video/fbdev/core/fbcon_ccw.c    |   28 +
 drivers/video/fbdev/core/fbcon_cw.c     |   28 +
 drivers/video/fbdev/core/fbcon_rotate.h |    9 
 drivers/video/fbdev/core/fbcon_ud.c     |   37 +-
 drivers/video/fbdev/core/tileblit.c     |   16 +
 drivers/video/fbdev/skeletonfb.c        |   12 
 include/linux/fb.h                      |    2 
 11 files changed, 678 insertions(+), 51 deletions(-)
Documentation/gpu/todo.rst +5 -8
@@ -314,19 +314,16 @@ Level: Advanced
 Garbage collect fbdev scrolling acceleration
 --------------------------------------------
 
-Scroll acceleration has been disabled in fbcon. Now it works as the old
-SCROLL_REDRAW mode. A ton of code was removed in fbcon.c and the hook bmove was
-removed from fbcon_ops.
-Remaining tasks:
+Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
+SCROLL_REDRAW. There's a ton of code this will allow us to remove:
 
-- a bunch of the hooks in fbcon_ops could be removed or simplified by calling
+- lots of code in fbcon.c
+
+- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
   directly instead of the function table (with a switch on p->rotate)
 
 - fb_copyarea is unused after this, and can be deleted from all drivers
 
-- after that, fb_copyarea can be deleted from fb_ops in include/linux/fb.h as
-  well as cfb_copyarea
-
 Note that not all acceleration code can be deleted, since clearing and cursor
 support is still accelerated, which might be good candidates for further
 deletion projects.
drivers/video/fbdev/core/bitblit.c +16 -0
@@ -43,6 +43,21 @@ static void update_attr(u8 *dst, u8 *src
 	}
 }
 
+static void bit_bmove(struct vc_data *vc, struct fb_info *info, int sy,
+		      int sx, int dy, int dx, int height, int width)
+{
+	struct fb_copyarea area;
+
+	area.sx = sx * vc->vc_font.width;
+	area.sy = sy * vc->vc_font.height;
+	area.dx = dx * vc->vc_font.width;
+	area.dy = dy * vc->vc_font.height;
+	area.height = height * vc->vc_font.height;
+	area.width = width * vc->vc_font.width;
+
+	info->fbops->fb_copyarea(info, &area);
+}
+
 static void bit_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		      int sx, int height, int width)
 {
@@ -378,6 +393,7 @@ static int bit_update_start(struct fb_in
 
 void fbcon_set_bitops(struct fbcon_ops *ops)
 {
+	ops->bmove = bit_bmove;
 	ops->clear = bit_clear;
 	ops->putcs = bit_putcs;
 	ops->clear_margins = bit_clear_margins;
drivers/video/fbdev/core/fbcon.c +489 -20

573 lines not on this page · raw message

drivers/video/fbdev/core/fbcon.h +59 -0

77 lines not on this page · raw message

drivers/video/fbdev/core/fbcon_ccw.c +24 -4
@@ -59,12 +59,31 @@ static void ccw_update_attr(u8 *dst, u8
 	}
 }
 
+
+static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
+		     int sx, int dy, int dx, int height, int width)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	struct fb_copyarea area;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+
+	area.sx = sy * vc->vc_font.height;
+	area.sy = vyres - ((sx + width) * vc->vc_font.width);
+	area.dx = dy * vc->vc_font.height;
+	area.dy = vyres - ((dx + width) * vc->vc_font.width);
+	area.width = height * vc->vc_font.height;
+	area.height  = width * vc->vc_font.width;
+
+	info->fbops->fb_copyarea(info, &area);
+}
+
 static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = info->var.yres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = sy * vc->vc_font.height;
@@ -121,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = info->var.yres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -210,7 +229,7 @@ static void ccw_cursor(struct vc_data *v
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = info->var.yres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -368,7 +387,7 @@ static int ccw_update_start(struct fb_in
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 yoffset;
-	u32 vyres = info->var.yres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
 	int err;
 
 	yoffset = (vyres - info->var.yres) - ops->var.xoffset;
@@ -383,6 +402,7 @@ static int ccw_update_start(struct fb_in
 
 void fbcon_rotate_ccw(struct fbcon_ops *ops)
 {
+	ops->bmove = ccw_bmove;
 	ops->clear = ccw_clear;
 	ops->putcs = ccw_putcs;
 	ops->clear_margins = ccw_clear_margins;
drivers/video/fbdev/core/fbcon_cw.c +24 -4
@@ -44,12 +44,31 @@ static void cw_update_attr(u8 *dst, u8 *
 	}
 }
 
+
+static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
+		     int sx, int dy, int dx, int height, int width)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	struct fb_copyarea area;
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+
+	area.sx = vxres - ((sy + height) * vc->vc_font.height);
+	area.sy = sx * vc->vc_font.width;
+	area.dx = vxres - ((dy + height) * vc->vc_font.height);
+	area.dy = dx * vc->vc_font.width;
+	area.width = height * vc->vc_font.height;
+	area.height  = width * vc->vc_font.width;
+
+	info->fbops->fb_copyarea(info, &area);
+}
+
 static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vxres = info->var.xres;
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = vxres - ((sy + height) * vc->vc_font.height);
@@ -106,7 +125,7 @@ static void cw_putcs(struct vc_data *vc,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vxres = info->var.xres;
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -193,7 +212,7 @@ static void cw_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vxres = info->var.xres;
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -350,7 +369,7 @@ static void cw_cursor(struct vc_data *vc
 static int cw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	u32 vxres = info->var.xres;
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 	u32 xoffset;
 	int err;
 
@@ -366,6 +385,7 @@ static int cw_update_start(struct fb_inf
 
 void fbcon_rotate_cw(struct fbcon_ops *ops)
 {
+	ops->bmove = cw_bmove;
 	ops->clear = cw_clear;
 	ops->putcs = cw_putcs;
 	ops->clear_margins = cw_clear_margins;
drivers/video/fbdev/core/fbcon_rotate.h +9 -0
@@ -11,6 +11,15 @@
 #ifndef _FBCON_ROTATE_H
 #define _FBCON_ROTATE_H
 
+#define GETVYRES(s,i) ({                           \
+        (s == SCROLL_REDRAW || s == SCROLL_MOVE) ? \
+        (i)->var.yres : (i)->var.yres_virtual; })
+
+#define GETVXRES(s,i) ({                           \
+        (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
+        (i)->var.xres : (i)->var.xres_virtual; })
+
+
 static inline int pattern_test_bit(u32 x, u32 y, u32 pitch, const char *pat)
 {
 	u32 tmp = (y * pitch) + x, index = tmp / 8,  bit = tmp % 8;
drivers/video/fbdev/core/fbcon_ud.c +29 -8
@@ -44,13 +44,33 @@ static void ud_update_attr(u8 *dst, u8 *
 	}
 }
 
+
+static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy,
+		     int sx, int dy, int dx, int height, int width)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	struct fb_copyarea area;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+
+	area.sy = vyres - ((sy + height) * vc->vc_font.height);
+	area.sx = vxres - ((sx + width) * vc->vc_font.width);
+	area.dy = vyres - ((dy + height) * vc->vc_font.height);
+	area.dx = vxres - ((dx + width) * vc->vc_font.width);
+	area.height = height * vc->vc_font.height;
+	area.width  = width * vc->vc_font.width;
+
+	info->fbops->fb_copyarea(info, &area);
+}
+
 static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		     int sx, int height, int width)
 {
+	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = info->var.yres;
-	u32 vxres = info->var.xres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dy = vyres - ((sy + height) * vc->vc_font.height);
@@ -142,8 +162,8 @@ static void ud_putcs(struct vc_data *vc,
 	u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = info->var.yres;
-	u32 vxres = info->var.xres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -239,8 +259,8 @@ static void ud_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = info->var.yres;
-	u32 vxres = info->var.xres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -390,8 +410,8 @@ static int ud_update_start(struct fb_inf
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	int xoffset, yoffset;
-	u32 vyres = info->var.yres;
-	u32 vxres = info->var.xres;
+	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p->scrollmode, info);
 	int err;
 
 	xoffset = vxres - info->var.xres - ops->var.xoffset;
@@ -409,6 +429,7 @@ static int ud_update_start(struct fb_inf
 
 void fbcon_rotate_ud(struct fbcon_ops *ops)
 {
+	ops->bmove = ud_bmove;
 	ops->clear = ud_clear;
 	ops->putcs = ud_putcs;
 	ops->clear_margins = ud_clear_margins;
drivers/video/fbdev/core/tileblit.c +16 -0
@@ -16,6 +16,21 @@
 #include <asm/types.h>
 #include "fbcon.h"
 
+static void tile_bmove(struct vc_data *vc, struct fb_info *info, int sy,
+		       int sx, int dy, int dx, int height, int width)
+{
+	struct fb_tilearea area;
+
+	area.sx = sx;
+	area.sy = sy;
+	area.dx = dx;
+	area.dy = dy;
+	area.height = height;
+	area.width = width;
+
+	info->tileops->fb_tilecopy(info, &area);
+}
+
 static void tile_clear(struct vc_data *vc, struct fb_info *info, int sy,
 		       int sx, int height, int width)
 {
@@ -118,6 +133,7 @@ void fbcon_set_tileops(struct vc_data *v
 	struct fb_tilemap map;
 	struct fbcon_ops *ops = info->fbcon_par;
 
+	ops->bmove = tile_bmove;
 	ops->clear = tile_clear;
 	ops->putcs = tile_putcs;
 	ops->clear_margins = tile_clear_margins;
drivers/video/fbdev/skeletonfb.c +6 -6
@@ -505,15 +505,15 @@ void xxxfb_fillrect(struct fb_info *p, c
 }
 
 /**
- *      xxxfb_copyarea - OBSOLETE function.
+ *      xxxfb_copyarea - REQUIRED function. Can use generic routines if
+ *                       non acclerated hardware and packed pixel based.
  *                       Copies one area of the screen to another area.
- *                       Will be deleted in a future version
  *
  *      @info: frame buffer structure that represents a single frame buffer
  *      @area: Structure providing the data to copy the framebuffer contents
  *	       from one region to another.
  *
- *      This drawing operation copied a rectangular area from one area of the
+ *      This drawing operation copies a rectangular area from one area of the
  *	screen to another area.
  */
 void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area) 
@@ -645,9 +645,9 @@ static const struct fb_ops xxxfb_ops = {
 	.fb_setcolreg	= xxxfb_setcolreg,
 	.fb_blank	= xxxfb_blank,
 	.fb_pan_display	= xxxfb_pan_display,
-	.fb_fillrect	= xxxfb_fillrect,	/* Needed !!!   */
-	.fb_copyarea	= xxxfb_copyarea,	/* Obsolete     */
-	.fb_imageblit	= xxxfb_imageblit,	/* Needed !!!   */
+	.fb_fillrect	= xxxfb_fillrect, 	/* Needed !!! */
+	.fb_copyarea	= xxxfb_copyarea,	/* Needed !!! */
+	.fb_imageblit	= xxxfb_imageblit,	/* Needed !!! */
 	.fb_cursor	= xxxfb_cursor,		/* Optional !!! */
 	.fb_sync	= xxxfb_sync,
 	.fb_ioctl	= xxxfb_ioctl,
include/linux/fb.h +1 -1
@@ -262,7 +262,7 @@ struct fb_ops {
 
 	/* Draws a rectangle */
 	void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
-	/* Copy data from area to another. Obsolete. */
+	/* Copy data from area to another */
 	void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
 	/* Draws a image to the display */
 	void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
author maintainer
#40 lore raw

PATCH 40/126 Revert "fbcon: Disable accelerated scrolling"

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream.

This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151.

Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration.

Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling.

This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer.

The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete.

This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon.

The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85).

So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check.

But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case.

That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers.

Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before.

That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers.

There isn't any impact on DRM when reverting those patches.

---
 Documentation/gpu/todo.rst       |   21 ------------------
 drivers/video/fbdev/core/fbcon.c |   45 ++++++++++++++++++++++++++++++++-------
 2 files changed, 37 insertions(+), 29 deletions(-)
Documentation/gpu/todo.rst +0 -21
@@ -311,27 +311,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration is disabled in fbcon by hard-wiring p->scrollmode =
-SCROLL_REDRAW. There's a ton of code this will allow us to remove:
-
-- lots of code in fbcon.c
-
-- a bunch of the hooks in fbcon_ops, maybe the remaining hooks could be called
-  directly instead of the function table (with a switch on p->rotate)
-
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
drivers/video/fbdev/core/fbcon.c +37 -8

78 lines not on this page · raw message

author maintainer
#41 lore raw

PATCH 41/126 fbcon: Add option to enable legacy hardware acceleration

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream.

Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver.

If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over.

For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option.

In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away.

In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code.

---
 drivers/video/console/Kconfig           |   20 ++++++++++++++++
 drivers/video/fbdev/core/fbcon.c        |   39 ++++++++++++++++++++++----------
 drivers/video/fbdev/core/fbcon.h        |   15 +++++++++++-
 drivers/video/fbdev/core/fbcon_ccw.c    |   10 ++++----
 drivers/video/fbdev/core/fbcon_cw.c     |   10 ++++----
 drivers/video/fbdev/core/fbcon_rotate.h |    4 +--
 drivers/video/fbdev/core/fbcon_ud.c     |   20 ++++++++--------
 7 files changed, 84 insertions(+), 34 deletions(-)
drivers/video/console/Kconfig +20 -0
@@ -78,6 +78,26 @@ config FRAMEBUFFER_CONSOLE
 	help
 	  Low-level framebuffer-based console driver.
 
+config FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	bool "Enable legacy fbcon hardware acceleration code"
+	depends on FRAMEBUFFER_CONSOLE
+	default y if PARISC
+	default n
+	help
+	  This option enables the fbcon (framebuffer text-based) hardware
+	  acceleration for graphics drivers which were written for the fbdev
+	  graphics interface.
+
+	  On modern machines, on mainstream machines (like x86-64) or when
+	  using a modern Linux distribution those fbdev drivers usually aren't used.
+	  So enabling this option wouldn't have any effect, which is why you want
+	  to disable this option on such newer machines.
+
+	  If you compile this kernel for older machines which still require the
+	  fbdev drivers, you may want to say Y.
+
+	  If unsure, select n.
+
 config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
        bool "Map the console to the primary display device"
        depends on FRAMEBUFFER_CONSOLE
drivers/video/fbdev/core/fbcon.c +28 -11
@@ -1136,11 +1136,13 @@ static void fbcon_init(struct vc_data *v
 
 	ops->graphics = 0;
 
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	if ((cap & FBINFO_HWACCEL_COPYAREA) &&
 	    !(cap & FBINFO_HWACCEL_DISABLED))
 		p->scrollmode = SCROLL_MOVE;
 	else /* default to something safe */
 		p->scrollmode = SCROLL_REDRAW;
+#endif
 
 	/*
 	 *  ++guenther: console.c:vc_allocate() relies on initializing
@@ -1705,7 +1707,7 @@ static bool fbcon_scroll(struct vc_data
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_up;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, t, b - t - count,
 				     count);
@@ -1795,7 +1797,7 @@ static bool fbcon_scroll(struct vc_data
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_down;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, b - 1, b - t - count,
 				     -count);
@@ -1946,12 +1948,12 @@ static void fbcon_bmove_rec(struct vc_da
 		   height, width);
 }
 
-static void updatescrollmode(struct fbcon_display *p,
+static void updatescrollmode_accel(struct fbcon_display *p,
 					struct fb_info *info,
 					struct vc_data *vc)
 {
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	struct fbcon_ops *ops = info->fbcon_par;
-	int fh = vc->vc_font.height;
 	int cap = info->flags;
 	u16 t = 0;
 	int ypan = FBCON_SWAP(ops->rotate, info->fix.ypanstep,
@@ -1972,12 +1974,6 @@ static void updatescrollmode(struct fbco
 	int fast_imageblit = (cap & FBINFO_HWACCEL_IMAGEBLIT) &&
 		!(cap & FBINFO_HWACCEL_DISABLED);
 
-	p->vrows = vyres/fh;
-	if (yres > (fh * (vc->vc_rows + 1)))
-		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
-	if ((yres % fh) && (vyres % fh < yres % fh))
-		p->vrows--;
-
 	if (good_wrap || good_pan) {
 		if (reading_fast || fast_copyarea)
 			p->scrollmode = good_wrap ?
@@ -1991,6 +1987,27 @@ static void updatescrollmode(struct fbco
 		else
 			p->scrollmode = SCROLL_REDRAW;
 	}
+#endif
+}
+
+static void updatescrollmode(struct fbcon_display *p,
+					struct fb_info *info,
+					struct vc_data *vc)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	int fh = vc->vc_font.height;
+	int yres = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
+	int vyres = FBCON_SWAP(ops->rotate, info->var.yres_virtual,
+				   info->var.xres_virtual);
+
+	p->vrows = vyres/fh;
+	if (yres > (fh * (vc->vc_rows + 1)))
+		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
+	if ((yres % fh) && (vyres % fh < yres % fh))
+		p->vrows--;
+
+	/* update scrollmode in case hardware acceleration is used */
+	updatescrollmode_accel(p, info, vc);
 }
 
 #define PITCH(w) (((w) + 7) >> 3)
@@ -2148,7 +2165,7 @@ static int fbcon_switch(struct vc_data *
 
 	updatescrollmode(p, info, vc);
 
-	switch (p->scrollmode) {
+	switch (fb_scrollmode(p)) {
 	case SCROLL_WRAP_MOVE:
 		scrollback_phys_max = p->vrows - vc->vc_rows;
 		break;
drivers/video/fbdev/core/fbcon.h +14 -1
@@ -29,7 +29,9 @@ struct fbcon_display {
     /* Filled in by the low-level console driver */
     const u_char *fontdata;
     int userfont;                   /* != 0 if fontdata kmalloc()ed */
-    u_short scrollmode;             /* Scroll Method */
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+    u_short scrollmode;             /* Scroll Method, use fb_scrollmode() */
+#endif
     u_short inverse;                /* != 0 text black on white as default */
     short yscroll;                  /* Hardware scrolling */
     int vrows;                      /* number of virtual rows */
@@ -208,6 +210,17 @@ static inline int attr_col_ec(int shift,
 #define SCROLL_REDRAW	   0x004
 #define SCROLL_PAN_REDRAW  0x005
 
+static inline u_short fb_scrollmode(struct fbcon_display *fb)
+{
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	return fb->scrollmode;
+#else
+	/* hardcoded to SCROLL_REDRAW if acceleration was disabled. */
+	return SCROLL_REDRAW;
+#endif
+}
+
+
 #ifdef CONFIG_FB_TILEBLITTING
 extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info);
 #endif
drivers/video/fbdev/core/fbcon_ccw.c +5 -5
@@ -65,7 +65,7 @@ static void ccw_bmove(struct vc_data *vc
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	area.sx = sy * vc->vc_font.height;
 	area.sy = vyres - ((sx + width) * vc->vc_font.width);
@@ -83,7 +83,7 @@ static void ccw_clear(struct vc_data *vc
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = sy * vc->vc_font.height;
@@ -140,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -229,7 +229,7 @@ static void ccw_cursor(struct vc_data *v
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -387,7 +387,7 @@ static int ccw_update_start(struct fb_in
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 	int err;
 
 	yoffset = (vyres - info->var.yres) - ops->var.xoffset;
drivers/video/fbdev/core/fbcon_cw.c +5 -5
@@ -50,7 +50,7 @@ static void cw_bmove(struct vc_data *vc,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	area.sx = vxres - ((sy + height) * vc->vc_font.height);
 	area.sy = sx * vc->vc_font.width;
@@ -68,7 +68,7 @@ static void cw_clear(struct vc_data *vc,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = vxres - ((sy + height) * vc->vc_font.height);
@@ -125,7 +125,7 @@ static void cw_putcs(struct vc_data *vc,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -212,7 +212,7 @@ static void cw_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -369,7 +369,7 @@ static void cw_cursor(struct vc_data *vc
 static int cw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	u32 xoffset;
 	int err;
 
drivers/video/fbdev/core/fbcon_rotate.h +2 -2
@@ -12,11 +12,11 @@
 #define _FBCON_ROTATE_H
 
 #define GETVYRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE) ? \
         (i)->var.yres : (i)->var.yres_virtual; })
 
 #define GETVXRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
         (i)->var.xres : (i)->var.xres_virtual; })
 
 
drivers/video/fbdev/core/fbcon_ud.c +10 -10
@@ -50,8 +50,8 @@ static void ud_bmove(struct vc_data *vc,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	area.sy = vyres - ((sy + height) * vc->vc_font.height);
 	area.sx = vxres - ((sx + width) * vc->vc_font.width);
@@ -69,8 +69,8 @@ static void ud_clear(struct vc_data *vc,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dy = vyres - ((sy + height) * vc->vc_font.height);
@@ -162,8 +162,8 @@ static void ud_putcs(struct vc_data *vc,
 	u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -259,8 +259,8 @@ static void ud_cursor(struct vc_data *vc
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 
 	if (!ops->fontbuffer)
 		return;
@@ -410,8 +410,8 @@ static int ud_update_start(struct fb_inf
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	int xoffset, yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	int err;
 
 	xoffset = vxres - info->var.xres - ops->var.xoffset;
author maintainer
#42 lore raw

PATCH 42/126 mptcp: fix msk traversal in mptcp_nl_cmd_set_flags()

In reply to Greg Kroah-Hartman

From: Paolo Abeni <[email protected]>

commit 8e9eacad7ec7a9cbf262649ebf1fa6e6f6cc7d82 upstream.

The MPTCP endpoint list is under RCU protection, guarded by the pernet spinlock. mptcp_nl_cmd_set_flags() traverses the list without acquiring the spin-lock nor under the RCU critical section.

This change addresses the issue performing the lookup and the endpoint update under the pernet spinlock.

[The upstream commit had to handle a lookup_by_id variable that is only
present in 5.17. This version of the patch removes that variable, so the __lookup_addr() function only handles the lookup as it is implemented in 5.15 and 5.16. It also removes one 'const' keyword to prevent a warning due to differing const-ness in the 5.17 version of addresses_equal().]

Fixes 0f9f696a502e ("mptcp: add set_flags command in PM netlink")
---
 net/mptcp/pm_netlink.c |   34 +++++++++++++++++++++++++---------
 1 file changed, 25 insertions(+), 9 deletions(-)
net/mptcp/pm_netlink.c +25 -9
@@ -459,6 +459,18 @@ static unsigned int fill_remote_addresse
 	return i;
 }
 
+static struct mptcp_pm_addr_entry *
+__lookup_addr(struct pm_nl_pernet *pernet, struct mptcp_addr_info *info)
+{
+	struct mptcp_pm_addr_entry *entry;
+
+	list_for_each_entry(entry, &pernet->local_addr_list, list) {
+		if (addresses_equal(&entry->addr, info, true))
+			return entry;
+	}
+	return NULL;
+}
+
 static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk)
 {
 	struct sock *sk = (struct sock *)msk;
@@ -1725,17 +1737,21 @@ static int mptcp_nl_cmd_set_flags(struct
 	if (addr.flags & MPTCP_PM_ADDR_FLAG_BACKUP)
 		bkup = 1;
 
-	list_for_each_entry(entry, &pernet->local_addr_list, list) {
-		if (addresses_equal(&entry->addr, &addr.addr, true)) {
-			mptcp_nl_addr_backup(net, &entry->addr, bkup);
-
-			if (bkup)
-				entry->flags |= MPTCP_PM_ADDR_FLAG_BACKUP;
-			else
-				entry->flags &= ~MPTCP_PM_ADDR_FLAG_BACKUP;
-		}
+	spin_lock_bh(&pernet->lock);
+	entry = __lookup_addr(pernet, &addr.addr);
+	if (!entry) {
+		spin_unlock_bh(&pernet->lock);
+		return -EINVAL;
 	}
 
+	if (bkup)
+		entry->flags |= MPTCP_PM_ADDR_FLAG_BACKUP;
+	else
+		entry->flags &= ~MPTCP_PM_ADDR_FLAG_BACKUP;
+	addr = *entry;
+	spin_unlock_bh(&pernet->lock);
+
+	mptcp_nl_addr_backup(net, &addr.addr, bkup);
 	return 0;
 }
 
author maintainer
#43 lore raw

PATCH 43/126 Revert "ASoC: mediatek: Check for error clk pointer"

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

This reverts commit e0bf3c9e05ca6837ac756ec7d9de70b44603da12 which is commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream

With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem.

An analysis of the code with this patch applied shows:

        ret = init_clks(pdev, clk);
        if (ret)
                return ERR_PTR(ret);
...
                for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
                        struct clk *c = clk[data->clk_id[j]];

                        if (IS_ERR(c)) {
                                dev_err(&pdev->dev, "%s: clk unavailable\n",
                                        data->name);
                                return ERR_CAST(c);
                        }

                        scpd->clk[j] = c;
                }

Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be reverted.

Fixes 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer")
Cc Jiasheng Jiang <[email protected]>
Cc Mark Brown <[email protected]>
Cc James Liao <[email protected]>
Cc Kevin Hilman <[email protected]>
Cc Matthias Brugger <[email protected]
Cc Frank Wunderlich <[email protected]>
Cc Daniel Golle <[email protected]>
---
 drivers/soc/mediatek/mtk-scpsys.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)
drivers/soc/mediatek/mtk-scpsys.c +4 -11
@@ -411,17 +411,12 @@ out:
 	return ret;
 }
 
-static int init_clks(struct platform_device *pdev, struct clk **clk)
+static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
 
-	for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
+	for (i = CLK_NONE + 1; i < CLK_MAX; i++)
 		clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
-		if (IS_ERR(clk[i]))
-			return PTR_ERR(clk[i]);
-	}
-
-	return 0;
 }
 
 static struct scp *init_scp(struct platform_device *pdev,
@@ -431,7 +426,7 @@ static struct scp *init_scp(struct platf
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
-	int i, j, ret;
+	int i, j;
 	struct scp *scp;
 	struct clk *clk[CLK_MAX];
 
@@ -486,9 +481,7 @@ static struct scp *init_scp(struct platf
 
 	pd_data->num_domains = num;
 
-	ret = init_clks(pdev, clk);
-	if (ret)
-		return ERR_PTR(ret);
+	init_clks(pdev, clk);
 
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];
author maintainer
#44 lore raw

PATCH 44/126 RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode

In reply to Greg Kroah-Hartman

From: Mayuresh Chitale <[email protected]>

commit de1d7b6a51dab546160d252e47baa54adf104d4a upstream.

Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR.

To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI).

Fixes a33c72faf2d73 ("RISC-V: KVM: Implement VCPU create, init and

destroy functions")

---
 arch/riscv/kvm/vcpu.c |    4 ++++
 1 file changed, 4 insertions(+)
arch/riscv/kvm/vcpu.c +4 -0
@@ -74,6 +74,7 @@ int kvm_arch_vcpu_precreate(struct kvm *
 int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *cntx;
+	struct kvm_vcpu_csr *reset_csr = &vcpu->arch.guest_reset_csr;
 
 	/* Mark this VCPU never ran */
 	vcpu->arch.ran_atleast_once = false;
@@ -89,6 +90,9 @@ int kvm_arch_vcpu_create(struct kvm_vcpu
 	cntx->hstatus |= HSTATUS_SPVP;
 	cntx->hstatus |= HSTATUS_SPV;
 
+	/* By default, make CY, TM, and IR counters accessible in VU mode */
+	reset_csr->scounteren = 0x7;
+
 	/* Setup VCPU timer */
 	kvm_riscv_vcpu_timer_init(vcpu);
 
author maintainer
#45 lore raw

PATCH 45/126 KVM: arm64: Avoid consuming a stale esr value when SError occur

In reply to Greg Kroah-Hartman

From: James Morse <[email protected]>

commit 1c71dbc8a179d99dd9bb7e7fc1888db613cf85de upstream.

When any exception other than an IRQ occurs, the CPU updates the ESR_EL2 register with the exception syndrome. An SError may also become pending, and will be synchronised by KVM. KVM notes the exception type, and whether an SError was synchronised in exit_code.

When an exception other than an IRQ occurs, fixup_guest_exit() updates vcpu->arch.fault.esr_el2 from the hardware register. When an SError was synchronised, the vcpu esr value is used to determine if the exception was due to an HVC. If so, ELR_EL2 is moved back one instruction. This is so that KVM can process the SError first, and re-execute the HVC if the guest survives the SError.

But if an IRQ synchronises an SError, the vcpu's esr value is stale. If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2, causing an unrelated guest instruction to be executed twice.

Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't update this register so don't need to check.

---
 arch/arm64/kvm/hyp/include/hyp/switch.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/kvm/hyp/include/hyp/switch.h +2 -1
@@ -446,7 +446,8 @@ static inline bool fixup_guest_exit(stru
 	if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ)
 		vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR);
 
-	if (ARM_SERROR_PENDING(*exit_code)) {
+	if (ARM_SERROR_PENDING(*exit_code) &&
+	    ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) {
 		u8 esr_ec = kvm_vcpu_trap_get_class(vcpu);
 
 		/*
author maintainer
#46 lore raw

PATCH 46/126 KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs

In reply to Greg Kroah-Hartman

From: James Morse <[email protected]>

commit 1229630af88620f6e3a621a1ebd1ca14d9340df7 upstream.

Prior to commit defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP"), when an SError is synchronised due to another exception, KVM handles the SError first. If the guest survives, the instruction that triggered the original exception is re-exectued to handle the first exception. HVC is treated as a special case as the instruction wouldn't normally be re-exectued, as its not a trap.

Commit defe21f49bc9 didn't preserve the behaviour of the 'return 1' that skips the rest of handle_exit().

Since commit defe21f49bc9, KVM will try to handle the SError and the original exception at the same time. When the exception was an HVC, fixup_guest_exit() has already rolled back ELR_EL2, meaning if the guest has virtual SError masked, it will execute and handle the HVC twice.

Restore the original behaviour.

Fixes defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP")
---
 arch/arm64/kvm/handle_exit.c |    8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/kvm/handle_exit.c +8 -0
@@ -226,6 +226,14 @@ int handle_exit(struct kvm_vcpu *vcpu, i
 {
 	struct kvm_run *run = vcpu->run;
 
+	if (ARM_SERROR_PENDING(exception_index)) {
+		/*
+		 * The SError is handled by handle_exit_early(). If the guest
+		 * survives it will re-execute the original instruction.
+		 */
+		return 1;
+	}
+
 	exception_index = ARM_EXCEPTION_CODE(exception_index);
 
 	switch (exception_index) {
author maintainer
#47 lore raw

PATCH 47/126 arm64: Add Cortex-A510 CPU part definition

In reply to Greg Kroah-Hartman

From: Anshuman Khandual <[email protected]>

commit 53960faf2b731dd2f9ed6e1334634b8ba6286850 upstream.

Add the CPU Partnumbers for the new Arm designs.

---
 arch/arm64/include/asm/cputype.h |    2 ++
 1 file changed, 2 insertions(+)
arch/arm64/include/asm/cputype.h +2 -0
@@ -73,6 +73,7 @@
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_CORTEX_A510	0xD46
 #define ARM_CPU_PART_CORTEX_A710	0xD47
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 
@@ -115,6 +116,7 @@
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#48 lore raw

PATCH 48/126 RDMA/cma: Use correct address when leaving multicast group

In reply to Greg Kroah-Hartman

From: Maor Gottlieb <[email protected]>

commit d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream.

In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate the mgid, otherwise we will generate an IGMP for an incorrect address.

---
 drivers/infiniband/core/cma.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/infiniband/core/cma.c +12 -10
@@ -67,8 +67,8 @@ static const char * const cma_events[] =
 	[RDMA_CM_EVENT_TIMEWAIT_EXIT]	 = "timewait exit",
 };
 
-static void cma_set_mgid(struct rdma_id_private *id_priv, struct sockaddr *addr,
-			 union ib_gid *mgid);
+static void cma_iboe_set_mgid(struct sockaddr *addr, union ib_gid *mgid,
+			      enum ib_gid_type gid_type);
 
 const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event)
 {
@@ -1846,17 +1846,19 @@ static void destroy_mc(struct rdma_id_pr
 		if (dev_addr->bound_dev_if)
 			ndev = dev_get_by_index(dev_addr->net,
 						dev_addr->bound_dev_if);
-		if (ndev) {
+		if (ndev && !send_only) {
+			enum ib_gid_type gid_type;
 			union ib_gid mgid;
 
-			cma_set_mgid(id_priv, (struct sockaddr *)&mc->addr,
-				     &mgid);
-
-			if (!send_only)
-				cma_igmp_send(ndev, &mgid, false);
-
-			dev_put(ndev);
+			gid_type = id_priv->cma_dev->default_gid_type
+					   [id_priv->id.port_num -
+					    rdma_start_port(
+						    id_priv->cma_dev->device)];
+			cma_iboe_set_mgid((struct sockaddr *)&mc->addr, &mgid,
+					  gid_type);
+			cma_igmp_send(ndev, &mgid, false);
 		}
+		dev_put(ndev);
 
 		cancel_work_sync(&mc->iboe_join.work);
 	}
author maintainer
#49 lore raw

PATCH 49/126 RDMA/ucma: Protect mc during concurrent multicast leaves

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

commit 36e8169ec973359f671f9ec7213547059cae972e upstream.

Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked.

  BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
  BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
  Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529
  CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
   print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247
   __kasan_report mm/kasan/report.c:433 [inline]
   kasan_report.cold+0x83/0xdf mm/kasan/report.c:450
   ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline]
   ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579
   ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614
   ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732
   vfs_write+0x28e/0xae0 fs/read_write.c:588
   ksys_write+0x1ee/0x250 fs/read_write.c:643
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list.

---
 drivers/infiniband/core/ucma.c |   34 +++++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 11 deletions(-)
drivers/infiniband/core/ucma.c +23 -11
@@ -95,6 +95,7 @@ struct ucma_context {
 	u64			uid;
 
 	struct list_head	list;
+	struct list_head	mc_list;
 	struct work_struct	close_work;
 };
 
@@ -105,6 +106,7 @@ struct ucma_multicast {
 
 	u64			uid;
 	u8			join_state;
+	struct list_head	list;
 	struct sockaddr_storage	addr;
 };
 
@@ -198,6 +200,7 @@ static struct ucma_context *ucma_alloc_c
 
 	INIT_WORK(&ctx->close_work, ucma_close_id);
 	init_completion(&ctx->comp);
+	INIT_LIST_HEAD(&ctx->mc_list);
 	/* So list_del() will work if we don't do ucma_finish_ctx() */
 	INIT_LIST_HEAD(&ctx->list);
 	ctx->file = file;
@@ -484,19 +487,19 @@ err1:
 
 static void ucma_cleanup_multicast(struct ucma_context *ctx)
 {
-	struct ucma_multicast *mc;
-	unsigned long index;
+	struct ucma_multicast *mc, *tmp;
 
-	xa_for_each(&multicast_table, index, mc) {
-		if (mc->ctx != ctx)
-			continue;
+	xa_lock(&multicast_table);
+	list_for_each_entry_safe(mc, tmp, &ctx->mc_list, list) {
+		list_del(&mc->list);
 		/*
 		 * At this point mc->ctx->ref is 0 so the mc cannot leave the
 		 * lock on the reader and this is enough serialization
 		 */
-		xa_erase(&multicast_table, index);
+		__xa_erase(&multicast_table, mc->id);
 		kfree(mc);
 	}
+	xa_unlock(&multicast_table);
 }
 
 static void ucma_cleanup_mc_events(struct ucma_multicast *mc)
@@ -1469,12 +1472,16 @@ static ssize_t ucma_process_join(struct
 	mc->uid = cmd->uid;
 	memcpy(&mc->addr, addr, cmd->addr_size);
 
-	if (xa_alloc(&multicast_table, &mc->id, NULL, xa_limit_32b,
+	xa_lock(&multicast_table);
+	if (__xa_alloc(&multicast_table, &mc->id, NULL, xa_limit_32b,
 		     GFP_KERNEL)) {
 		ret = -ENOMEM;
 		goto err_free_mc;
 	}
 
+	list_add_tail(&mc->list, &ctx->mc_list);
+	xa_unlock(&multicast_table);
+
 	mutex_lock(&ctx->mutex);
 	ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *)&mc->addr,
 				  join_state, mc);
@@ -1500,8 +1507,11 @@ err_leave_multicast:
 	mutex_unlock(&ctx->mutex);
 	ucma_cleanup_mc_events(mc);
 err_xa_erase:
-	xa_erase(&multicast_table, mc->id);
+	xa_lock(&multicast_table);
+	list_del(&mc->list);
+	__xa_erase(&multicast_table, mc->id);
 err_free_mc:
+	xa_unlock(&multicast_table);
 	kfree(mc);
 err_put_ctx:
 	ucma_put_ctx(ctx);
@@ -1569,15 +1579,17 @@ static ssize_t ucma_leave_multicast(stru
 		mc = ERR_PTR(-EINVAL);
 	else if (!refcount_inc_not_zero(&mc->ctx->ref))
 		mc = ERR_PTR(-ENXIO);
-	else
-		__xa_erase(&multicast_table, mc->id);
-	xa_unlock(&multicast_table);
 
 	if (IS_ERR(mc)) {
+		xa_unlock(&multicast_table);
 		ret = PTR_ERR(mc);
 		goto out;
 	}
 
+	list_del(&mc->list);
+	__xa_erase(&multicast_table, mc->id);
+	xa_unlock(&multicast_table);
+
 	mutex_lock(&mc->ctx->mutex);
 	rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr);
 	mutex_unlock(&mc->ctx->mutex);
author maintainer
#50 lore raw

PATCH 50/126 RDMA/siw: Fix refcounting leak in siw_create_qp()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit a75badebfdc0b3823054bedf112edb54d6357c75 upstream.

The atomic_inc() needs to be paired with an atomic_dec() on the error path.

---
 drivers/infiniband/sw/siw/siw_verbs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/sw/siw/siw_verbs.c +2 -1
@@ -311,7 +311,8 @@ int siw_create_qp(struct ib_qp *ibqp, st
 
 	if (atomic_inc_return(&sdev->num_qp) > SIW_MAX_QP) {
 		siw_dbg(base_dev, "too many QP's\n");
-		return -ENOMEM;
+		rv = -ENOMEM;
+		goto err_atomic;
 	}
 	if (attrs->qp_type != IB_QPT_RC) {
 		siw_dbg(base_dev, "only RC QP's supported\n");
author maintainer
#51 lore raw

PATCH 51/126 IB/rdmavt: Validate remote_addr during loopback atomic tests

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream.

The rdma-core test suite sends an unaligned remote address and expects a failure.

ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest)

The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system.

The loopback of these operations is a distinct code path.

Fix by syntaxing the proposed remote address in the loopback code path.

---
 drivers/infiniband/sw/rdmavt/qp.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/sw/rdmavt/qp.c +2 -0
@@ -3073,6 +3073,8 @@ do_write:
 	case IB_WR_ATOMIC_FETCH_AND_ADD:
 		if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
 			goto inv_err;
+		if (unlikely(wqe->atomic_wr.remote_addr & (sizeof(u64) - 1)))
+			goto inv_err;
 		if (unlikely(!rvt_rkey_ok(qp, &qp->r_sge.sge, sizeof(u64),
 					  wqe->atomic_wr.remote_addr,
 					  wqe->atomic_wr.rkey,
author maintainer
#52 lore raw

PATCH 52/126 RDMA/siw: Fix broken RDMA Read Fence/Resume logic.

In reply to Greg Kroah-Hartman

From: Bernard Metzler <[email protected]>

commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream.

Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore.

Fixes 8b6a361b8c48 ("rdma/siw: receive path")
Fixes a531975279f3 ("rdma/siw: main include file")
---
 drivers/infiniband/sw/siw/siw.h       |    7 +------
 drivers/infiniband/sw/siw/siw_qp_rx.c |   20 +++++++++++---------
 2 files changed, 12 insertions(+), 15 deletions(-)
drivers/infiniband/sw/siw/siw.h +1 -6
@@ -644,14 +644,9 @@ static inline struct siw_sqe *orq_get_cu
 	return &qp->orq[qp->orq_get % qp->attrs.orq_size];
 }
 
-static inline struct siw_sqe *orq_get_tail(struct siw_qp *qp)
-{
-	return &qp->orq[qp->orq_put % qp->attrs.orq_size];
-}
-
 static inline struct siw_sqe *orq_get_free(struct siw_qp *qp)
 {
-	struct siw_sqe *orq_e = orq_get_tail(qp);
+	struct siw_sqe *orq_e = &qp->orq[qp->orq_put % qp->attrs.orq_size];
 
 	if (READ_ONCE(orq_e->flags) == 0)
 		return orq_e;
drivers/infiniband/sw/siw/siw_qp_rx.c +11 -9
@@ -1153,11 +1153,12 @@ static int siw_check_tx_fence(struct siw
 
 	spin_lock_irqsave(&qp->orq_lock, flags);
 
-	rreq = orq_get_current(qp);
-
 	/* free current orq entry */
+	rreq = orq_get_current(qp);
 	WRITE_ONCE(rreq->flags, 0);
 
+	qp->orq_get++;
+
 	if (qp->tx_ctx.orq_fence) {
 		if (unlikely(tx_waiting->wr_status != SIW_WR_QUEUED)) {
 			pr_warn("siw: [QP %u]: fence resume: bad status %d\n",
@@ -1165,10 +1166,12 @@ static int siw_check_tx_fence(struct siw
 			rv = -EPROTO;
 			goto out;
 		}
-		/* resume SQ processing */
+		/* resume SQ processing, if possible */
 		if (tx_waiting->sqe.opcode == SIW_OP_READ ||
 		    tx_waiting->sqe.opcode == SIW_OP_READ_LOCAL_INV) {
-			rreq = orq_get_tail(qp);
+
+			/* SQ processing was stopped because of a full ORQ */
+			rreq = orq_get_free(qp);
 			if (unlikely(!rreq)) {
 				pr_warn("siw: [QP %u]: no ORQE\n", qp_id(qp));
 				rv = -EPROTO;
@@ -1181,15 +1184,14 @@ static int siw_check_tx_fence(struct siw
 			resume_tx = 1;
 
 		} else if (siw_orq_empty(qp)) {
+			/*
+			 * SQ processing was stopped by fenced work request.
+			 * Resume since all previous Read's are now completed.
+			 */
 			qp->tx_ctx.orq_fence = 0;
 			resume_tx = 1;
-		} else {
-			pr_warn("siw: [QP %u]: fence resume: orq idx: %d:%d\n",
-				qp_id(qp), qp->orq_get, qp->orq_put);
-			rv = -EPROTO;
 		}
 	}
-	qp->orq_get++;
 out:
 	spin_unlock_irqrestore(&qp->orq_lock, flags);
 
author maintainer
#53 lore raw

PATCH 53/126 RDMA/mlx4: Dont continue event handler after memory allocation failure

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream.

The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway.

Fix it by calling to return instead of break after memory allocation failure.

---
 drivers/infiniband/hw/mlx4/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/mlx4/main.c +1 -1
@@ -3247,7 +3247,7 @@ static void mlx4_ib_event(struct mlx4_de
 	case MLX4_DEV_EVENT_PORT_MGMT_CHANGE:
 		ew = kmalloc(sizeof *ew, GFP_ATOMIC);
 		if (!ew)
-			break;
+			return;
 
 		INIT_WORK(&ew->work, handle_port_mgmt_change_event);
 		memcpy(&ew->ib_eqe, eqe, sizeof *eqe);
author maintainer
#54 lore raw

PATCH 54/126 ALSA: usb-audio: initialize variables that could ignore errors

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

commit 3da4b7403db87d39bc2613cfd790de1de99a70ab upstream.

clang static analysis reports this representative issue mixer.c:1548:35: warning: Assigned value is garbage or undefined

        ucontrol->value.integer.value[0] = val;
                                         ^ ~~~

The filter_error() macro allows errors to be ignored. If errors can be ignored, initialize variables so garbage will not be used.

Fixes 48cc42973509 ("ALSA: usb-audio: Filter error from connector kctl ops, too")
---
 sound/usb/mixer.c |    4 ++++
 1 file changed, 4 insertions(+)
sound/usb/mixer.c +4 -0
@@ -1526,6 +1526,10 @@ error:
 		usb_audio_err(chip,
 			"cannot get connectors status: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
 			UAC_GET_CUR, validx, idx, cval->val_type);
+
+		if (val)
+			*val = 0;
+
 		return filter_error(cval, ret);
 	}
 
author maintainer
#55 lore raw

PATCH 55/126 ALSA: hda: Fix signedness of sscanf() arguments

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 0444f82766f0b5b9c8302ad802dafa5dd0e722d0 upstream.

The %x format of sscanf() takes an unsigned int pointer, while we pass a signed int pointer. Practically it's OK, but this may result in a compile warning. Let's fix it.

Fixes a235d5b8e550 ("ALSA: hda: Allow model option to specify PCI SSID alias")
---
 sound/pci/hda/hda_auto_parser.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/hda_auto_parser.c +1 -1
@@ -985,7 +985,7 @@ void snd_hda_pick_fixup(struct hda_codec
 	int id = HDA_FIXUP_ID_NOT_SET;
 	const char *name = NULL;
 	const char *type = NULL;
-	int vendor, device;
+	unsigned int vendor, device;
 
 	if (codec->fixup_id != HDA_FIXUP_ID_NOT_SET)
 		return;
author maintainer
#56 lore raw

PATCH 56/126 ALSA: hda: Skip codec shutdown in case the codec is not registered

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

commit 1c7f0e349aa5f8f80b1cac3d4917405332e14cdf upstream.

If the codec->registered is not set then it means that pm_runtime is not yet enabled and the codec->pcm_list_head has not been initialized.

The access to the not initialized pcm_list_head will lead a kernel crash during shutdown.

---
 sound/pci/hda/hda_codec.c |    4 ++++
 1 file changed, 4 insertions(+)
sound/pci/hda/hda_codec.c +4 -0
@@ -3000,6 +3000,10 @@ void snd_hda_codec_shutdown(struct hda_c
 {
 	struct hda_pcm *cpcm;
 
+	/* Skip the shutdown if codec is not registered */
+	if (!codec->registered)
+		return;
+
 	list_for_each_entry(cpcm, &codec->pcm_list_head, list)
 		snd_pcm_suspend_all(cpcm->pcm);
 
author maintainer
#57 lore raw

PATCH 57/126 iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

In reply to Greg Kroah-Hartman

From: Guoqing Jiang <[email protected]>

commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream.

After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error.

Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation.

Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion.

---
 drivers/iommu/intel/irq_remapping.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/iommu/intel/irq_remapping.c +10 -3
@@ -569,9 +569,8 @@ static int intel_setup_irq_remapping(str
 					    fn, &intel_ir_domain_ops,
 					    iommu);
 	if (!iommu->ir_domain) {
-		irq_domain_free_fwnode(fn);
 		pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
-		goto out_free_bitmap;
+		goto out_free_fwnode;
 	}
 	iommu->ir_msi_domain =
 		arch_create_remap_msi_irq_domain(iommu->ir_domain,
@@ -595,7 +594,7 @@ static int intel_setup_irq_remapping(str
 
 		if (dmar_enable_qi(iommu)) {
 			pr_err("Failed to enable queued invalidation\n");
-			goto out_free_bitmap;
+			goto out_free_ir_domain;
 		}
 	}
 
@@ -619,6 +618,14 @@ static int intel_setup_irq_remapping(str
 
 	return 0;
 
+out_free_ir_domain:
+	if (iommu->ir_msi_domain)
+		irq_domain_remove(iommu->ir_msi_domain);
+	iommu->ir_msi_domain = NULL;
+	irq_domain_remove(iommu->ir_domain);
+	iommu->ir_domain = NULL;
+out_free_fwnode:
+	irq_domain_free_fwnode(fn);
 out_free_bitmap:
 	bitmap_free(bitmap);
 out_free_pages:
author maintainer
#58 lore raw

PATCH 58/126 iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

In reply to Greg Kroah-Hartman

From: Joerg Roedel <[email protected]>

commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.

The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix.

Fixes 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
---
 drivers/iommu/amd/init.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/iommu/amd/init.c +2 -0
@@ -21,6 +21,7 @@
 #include <linux/export.h>
 #include <linux/kmemleak.h>
 #include <linux/cc_platform.h>
+#include <linux/iopoll.h>
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/apic.h>
@@ -834,6 +835,7 @@ static int iommu_ga_log_enable(struct am
 		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
 		if (status & (MMIO_STATUS_GALOG_RUN_MASK))
 			break;
+		udelay(10);
 	}
 
 	if (WARN_ON(i >= LOOP_TIMEOUT))
author maintainer
#59 lore raw

PATCH 59/126 spi: bcm-qspi: check for valid cs before applying chip select

In reply to Greg Kroah-Hartman

From: Kamal Dasu <[email protected]>

commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.

Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

---
 drivers/spi/spi-bcm-qspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-bcm-qspi.c +1 -1
@@ -573,7 +573,7 @@ static void bcm_qspi_chip_select(struct
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)
author maintainer
#60 lore raw

PATCH 60/126 spi: mediatek: Avoid NULL pointer crash in interrupt

In reply to Greg Kroah-Hartman

From: Benjamin Gaignard <[email protected]>

commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream.

In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter.

Fixes a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
---
 drivers/spi/spi-mt65xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-mt65xx.c +1 -1
@@ -624,7 +624,7 @@ static irqreturn_t mtk_spi_interrupt(int
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,
author maintainer
#61 lore raw

PATCH 61/126 spi: meson-spicc: add IRQ check in meson_spicc_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream.

This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s.

---
 drivers/spi/spi-meson-spicc.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/spi/spi-meson-spicc.c +5 -0
@@ -693,6 +693,11 @@ static int meson_spicc_probe(struct plat
 	writel_relaxed(0, spicc->base + SPICC_INTREG);
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out_master;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq,
 			       0, NULL, spicc);
 	if (ret) {
author maintainer
#62 lore raw

PATCH 62/126 spi: uniphier: fix reference count leak in uniphier_spi_probe()

In reply to Greg Kroah-Hartman

From: Xin Xiong <[email protected]>

commit 37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream.

The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both dma_rx and dma_tx objects, which may lead to refcount leaks.

Fix it by decrementing the reference count of specific objects in those error paths.

---
 drivers/spi/spi-uniphier.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/spi/spi-uniphier.c +14 -4
@@ -726,7 +726,7 @@ static int uniphier_spi_probe(struct pla
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get TX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_tx_burst = caps.max_burst;
 	}
@@ -735,7 +735,7 @@ static int uniphier_spi_probe(struct pla
 	if (IS_ERR_OR_NULL(master->dma_rx)) {
 		if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		master->dma_rx = NULL;
 		dma_rx_burst = INT_MAX;
@@ -744,7 +744,7 @@ static int uniphier_spi_probe(struct pla
 		if (ret) {
 			dev_err(&pdev->dev, "failed to get RX DMA capacities: %d\n",
 				ret);
-			goto out_disable_clk;
+			goto out_release_dma;
 		}
 		dma_rx_burst = caps.max_burst;
 	}
@@ -753,10 +753,20 @@ static int uniphier_spi_probe(struct pla
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret)
-		goto out_disable_clk;
+		goto out_release_dma;
 
 	return 0;
 
+out_release_dma:
+	if (!IS_ERR_OR_NULL(master->dma_rx)) {
+		dma_release_channel(master->dma_rx);
+		master->dma_rx = NULL;
+	}
+	if (!IS_ERR_OR_NULL(master->dma_tx)) {
+		dma_release_channel(master->dma_tx);
+		master->dma_tx = NULL;
+	}
+
 out_disable_clk:
 	clk_disable_unprepare(priv->clk);
 
author maintainer
#63 lore raw

PATCH 63/126 IB/hfi1: Fix tstats alloc and dealloc

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit e5cce44aff3be9ad2cd52f63f35edbd706181d50 upstream.

The tstats allocation is done in the accelerated ndo_init function but the allocation is not tested to succeed.

The deallocation is not done in the accelerated ndo_uninit function.

Resolve issues by testing for an allocation failure and adding the free_percpu in the uninit function.

---
 drivers/infiniband/hw/hfi1/ipoib_main.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hfi1/ipoib_main.c +12 -2
@@ -22,26 +22,35 @@ static int hfi1_ipoib_dev_init(struct ne
 	int ret;
 
 	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
+	if (!dev->tstats)
+		return -ENOMEM;
 
 	ret = priv->netdev_ops->ndo_init(dev);
 	if (ret)
-		return ret;
+		goto out_ret;
 
 	ret = hfi1_netdev_add_data(priv->dd,
 				   qpn_from_mac(priv->netdev->dev_addr),
 				   dev);
 	if (ret < 0) {
 		priv->netdev_ops->ndo_uninit(dev);
-		return ret;
+		goto out_ret;
 	}
 
 	return 0;
+out_ret:
+	free_percpu(dev->tstats);
+	dev->tstats = NULL;
+	return ret;
 }
 
 static void hfi1_ipoib_dev_uninit(struct net_device *dev)
 {
 	struct hfi1_ipoib_dev_priv *priv = hfi1_ipoib_priv(dev);
 
+	free_percpu(dev->tstats);
+	dev->tstats = NULL;
+
 	hfi1_netdev_remove_data(priv->dd, qpn_from_mac(priv->netdev->dev_addr));
 
 	priv->netdev_ops->ndo_uninit(dev);
@@ -166,6 +175,7 @@ static void hfi1_ipoib_netdev_dtor(struc
 	hfi1_ipoib_rxq_deinit(priv->netdev);
 
 	free_percpu(dev->tstats);
+	dev->tstats = NULL;
 }
 
 static void hfi1_ipoib_set_id(struct net_device *dev, int id)
author maintainer
#64 lore raw

PATCH 64/126 IB/cm: Release previously acquired reference counter in the cm_id_priv

In reply to Greg Kroah-Hartman

From: Mark Zhang <[email protected]>

commit b856101a1774b5f1c8c99e8dfdef802856520732 upstream.

In failure flow, the reference counter acquired was not released, and the following error was reported:

drivers/infiniband/core/cm.c:3373 cm_lap_handler() warn: inconsistent

			refcounting 'cm_id_priv->refcount.refs.counter':
---
 drivers/infiniband/core/cm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/cm.c +1 -1
@@ -3322,7 +3322,7 @@ static int cm_lap_handler(struct cm_work
 	ret = cm_init_av_by_path(param->alternate_path, NULL, &alt_av);
 	if (ret) {
 		rdma_destroy_ah_attr(&ah_attr);
-		return -EINVAL;
+		goto deref;
 	}
 
 	spin_lock_irq(&cm_id_priv->lock);
author maintainer
#65 lore raw

PATCH 65/126 net: ieee802154: hwsim: Ensure proper channel selection at probe time

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream.

Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13.

Fixes f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
[[email protected]: fixed assigment from page to channel]
---
 drivers/net/ieee802154/mac802154_hwsim.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ieee802154/mac802154_hwsim.c +1 -0
@@ -786,6 +786,7 @@ static int hwsim_add_one(struct genl_inf
 		goto err_pib;
 	}
 
+	pib->channel = 13;
 	rcu_assign_pointer(phy->pib, pib);
 	phy->idx = idx;
 	INIT_LIST_HEAD(&phy->edges);
author maintainer
#66 lore raw

PATCH 66/126 net: ieee802154: mcr20a: Fix lifs/sifs periods

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream.

These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds.

Fixes 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
---
 drivers/net/ieee802154/mcr20a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ieee802154/mcr20a.c +2 -2
@@ -976,8 +976,8 @@ static void mcr20a_hw_setup(struct mcr20
 	dev_dbg(printdev(lp), "%s\n", __func__);
 
 	phy->symbol_duration = 16;
-	phy->lifs_period = 40;
-	phy->sifs_period = 12;
+	phy->lifs_period = 40 * phy->symbol_duration;
+	phy->sifs_period = 12 * phy->symbol_duration;
 
 	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
 			IEEE802154_HW_AFILT |
author maintainer
#67 lore raw

PATCH 67/126 net: ieee802154: ca8210: Stop leaking skbs

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.

Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure.

Free the skb structure upon error before returning.

---
 drivers/net/ieee802154/ca8210.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ieee802154/ca8210.c +1 -0
@@ -1771,6 +1771,7 @@ static int ca8210_async_xmit_complete(
 			status
 		);
 		if (status != MAC_TRANSACTION_OVERFLOW) {
+			dev_kfree_skb_any(priv->tx_skb);
 			ieee802154_wake_queue(priv->hw);
 			return 0;
 		}
author maintainer
#68 lore raw

PATCH 68/126 netfilter: nft_reject_bridge: Fix for missing reply from prerouting

In reply to Greg Kroah-Hartman

From: Phil Sutter <[email protected]>

commit aeac4554eb549037ff2f719200c0a9c1c25e7eaa upstream.

Prior to commit fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff creation helpers"), nft_reject_bridge did not assign to nskb->dev before passing nskb on to br_forward(). The shared skbuff creation helpers introduced in above commit do which seems to confuse br_forward() as reject statements in prerouting hook won't emit a packet anymore.

Fix this by simply passing NULL instead of 'dev' to the helpers - they use the pointer for just that assignment, nothing else.

Fixes fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff creation helpers")
---
 net/bridge/netfilter/nft_reject_bridge.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/bridge/netfilter/nft_reject_bridge.c +4 -4
@@ -49,7 +49,7 @@ static void nft_reject_br_send_v4_tcp_re
 {
 	struct sk_buff *nskb;
 
-	nskb = nf_reject_skb_v4_tcp_reset(net, oldskb, dev, hook);
+	nskb = nf_reject_skb_v4_tcp_reset(net, oldskb, NULL, hook);
 	if (!nskb)
 		return;
 
@@ -65,7 +65,7 @@ static void nft_reject_br_send_v4_unreac
 {
 	struct sk_buff *nskb;
 
-	nskb = nf_reject_skb_v4_unreach(net, oldskb, dev, hook, code);
+	nskb = nf_reject_skb_v4_unreach(net, oldskb, NULL, hook, code);
 	if (!nskb)
 		return;
 
@@ -81,7 +81,7 @@ static void nft_reject_br_send_v6_tcp_re
 {
 	struct sk_buff *nskb;
 
-	nskb = nf_reject_skb_v6_tcp_reset(net, oldskb, dev, hook);
+	nskb = nf_reject_skb_v6_tcp_reset(net, oldskb, NULL, hook);
 	if (!nskb)
 		return;
 
@@ -98,7 +98,7 @@ static void nft_reject_br_send_v6_unreac
 {
 	struct sk_buff *nskb;
 
-	nskb = nf_reject_skb_v6_unreach(net, oldskb, dev, hook, code);
+	nskb = nf_reject_skb_v6_unreach(net, oldskb, NULL, hook, code);
 	if (!nskb)
 		return;
 
author maintainer
#69 lore raw

PATCH 69/126 net: ieee802154: Return meaningful error codes from the netlink helpers

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

---
 net/ieee802154/nl802154.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/ieee802154/nl802154.c +4 -4
@@ -1441,7 +1441,7 @@ static int nl802154_send_key(struct sk_b
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1634,7 +1634,7 @@ static int nl802154_send_device(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1812,7 +1812,7 @@ static int nl802154_send_devkey(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1988,7 +1988,7 @@ static int nl802154_send_seclevel(struct
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
author maintainer
#70 lore raw

PATCH 70/126 net/smc: Forward wakeup to smc socket waitqueue after fallback

In reply to Greg Kroah-Hartman

From: Wen Gu <[email protected]>

commit 341adeec9adad0874f29a0a1af35638207352a39 upstream.

When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications.

After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it.

The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this:

 general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
 CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E     5.16.0+ #107
 RIP: 0010:__wake_up_common+0x65/0x170
 Call Trace:
  <IRQ>
  __wake_up_common_lock+0x7a/0xc0
  sock_def_readable+0x3c/0x70
  tcp_data_queue+0x4a7/0xc40
  tcp_rcv_established+0x32f/0x660
  ? sk_filter_trim_cap+0xcb/0x2e0
  tcp_v4_do_rcv+0x10b/0x260
  tcp_v4_rcv+0xd2a/0xde0
  ip_protocol_deliver_rcu+0x3b/0x1d0
  ip_local_deliver_finish+0x54/0x60
  ip_local_deliver+0x6a/0x110
  ? tcp_v4_early_demux+0xa2/0x140
  ? tcp_v4_early_demux+0x10d/0x140
  ip_sublist_rcv_finish+0x49/0x60
  ip_sublist_rcv+0x19d/0x230
  ip_list_rcv+0x13e/0x170
  __netif_receive_skb_list_core+0x1c2/0x240
  netif_receive_skb_list_internal+0x1e6/0x320
  napi_complete_done+0x11d/0x190
  mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
  __napi_poll+0x3c/0x1b0
  net_rx_action+0x27c/0x300
  __do_softirq+0x114/0x2d2
  irq_exit_rcu+0xb4/0xe0
  common_interrupt+0xba/0xe0
  </IRQ>
  <TASK>

The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment.

This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries.

Fixes 2153bd1e3d3d ("net/smc: Transfer remaining wait queue entries during fallback")
---
 net/smc/af_smc.c |  133 ++++++++++++++++++++++++++++++++++++++++++++++++-------
 net/smc/smc.h    |   20 +++++++-
 2 files changed, 137 insertions(+), 16 deletions(-)
net/smc/af_smc.c +118 -15
@@ -566,17 +566,115 @@ static void smc_stat_fallback(struct smc
 	mutex_unlock(&net->smc.mutex_fback_rsn);
 }
 
+/* must be called under rcu read lock */
+static void smc_fback_wakeup_waitqueue(struct smc_sock *smc, void *key)
+{
+	struct socket_wq *wq;
+	__poll_t flags;
+
+	wq = rcu_dereference(smc->sk.sk_wq);
+	if (!skwq_has_sleeper(wq))
+		return;
+
+	/* wake up smc sk->sk_wq */
+	if (!key) {
+		/* sk_state_change */
+		wake_up_interruptible_all(&wq->wait);
+	} else {
+		flags = key_to_poll(key);
+		if (flags & (EPOLLIN | EPOLLOUT))
+			/* sk_data_ready or sk_write_space */
+			wake_up_interruptible_sync_poll(&wq->wait, flags);
+		else if (flags & EPOLLERR)
+			/* sk_error_report */
+			wake_up_interruptible_poll(&wq->wait, flags);
+	}
+}
+
+static int smc_fback_mark_woken(wait_queue_entry_t *wait,
+				unsigned int mode, int sync, void *key)
+{
+	struct smc_mark_woken *mark =
+		container_of(wait, struct smc_mark_woken, wait_entry);
+
+	mark->woken = true;
+	mark->key = key;
+	return 0;
+}
+
+static void smc_fback_forward_wakeup(struct smc_sock *smc, struct sock *clcsk,
+				     void (*clcsock_callback)(struct sock *sk))
+{
+	struct smc_mark_woken mark = { .woken = false };
+	struct socket_wq *wq;
+
+	init_waitqueue_func_entry(&mark.wait_entry,
+				  smc_fback_mark_woken);
+	rcu_read_lock();
+	wq = rcu_dereference(clcsk->sk_wq);
+	if (!wq)
+		goto out;
+	add_wait_queue(sk_sleep(clcsk), &mark.wait_entry);
+	clcsock_callback(clcsk);
+	remove_wait_queue(sk_sleep(clcsk), &mark.wait_entry);
+
+	if (mark.woken)
+		smc_fback_wakeup_waitqueue(smc, mark.key);
+out:
+	rcu_read_unlock();
+}
+
+static void smc_fback_state_change(struct sock *clcsk)
+{
+	struct smc_sock *smc =
+		smc_clcsock_user_data(clcsk);
+
+	if (!smc)
+		return;
+	smc_fback_forward_wakeup(smc, clcsk, smc->clcsk_state_change);
+}
+
+static void smc_fback_data_ready(struct sock *clcsk)
+{
+	struct smc_sock *smc =
+		smc_clcsock_user_data(clcsk);
+
+	if (!smc)
+		return;
+	smc_fback_forward_wakeup(smc, clcsk, smc->clcsk_data_ready);
+}
+
+static void smc_fback_write_space(struct sock *clcsk)
+{
+	struct smc_sock *smc =
+		smc_clcsock_user_data(clcsk);
+
+	if (!smc)
+		return;
+	smc_fback_forward_wakeup(smc, clcsk, smc->clcsk_write_space);
+}
+
+static void smc_fback_error_report(struct sock *clcsk)
+{
+	struct smc_sock *smc =
+		smc_clcsock_user_data(clcsk);
+
+	if (!smc)
+		return;
+	smc_fback_forward_wakeup(smc, clcsk, smc->clcsk_error_report);
+}
+
 static int smc_switch_to_fallback(struct smc_sock *smc, int reason_code)
 {
-	wait_queue_head_t *smc_wait = sk_sleep(&smc->sk);
-	wait_queue_head_t *clc_wait;
-	unsigned long flags;
+	struct sock *clcsk;
 
 	mutex_lock(&smc->clcsock_release_lock);
 	if (!smc->clcsock) {
 		mutex_unlock(&smc->clcsock_release_lock);
 		return -EBADF;
 	}
+	clcsk = smc->clcsock->sk;
+
 	smc->use_fallback = true;
 	smc->fallback_rsn = reason_code;
 	smc_stat_fallback(smc);
@@ -587,16 +685,22 @@ static int smc_switch_to_fallback(struct
 		smc->clcsock->wq.fasync_list =
 			smc->sk.sk_socket->wq.fasync_list;
 
-		/* There may be some entries remaining in
-		 * smc socket->wq, which should be removed
-		 * to clcsocket->wq during the fallback.
+		/* There might be some wait entries remaining
+		 * in smc sk->sk_wq and they should be woken up
+		 * as clcsock's wait queue is woken up.
 		 */
-		clc_wait = sk_sleep(smc->clcsock->sk);
-		spin_lock_irqsave(&smc_wait->lock, flags);
-		spin_lock_nested(&clc_wait->lock, SINGLE_DEPTH_NESTING);
-		list_splice_init(&smc_wait->head, &clc_wait->head);
-		spin_unlock(&clc_wait->lock);
-		spin_unlock_irqrestore(&smc_wait->lock, flags);
+		smc->clcsk_state_change = clcsk->sk_state_change;
+		smc->clcsk_data_ready = clcsk->sk_data_ready;
+		smc->clcsk_write_space = clcsk->sk_write_space;
+		smc->clcsk_error_report = clcsk->sk_error_report;
+
+		clcsk->sk_state_change = smc_fback_state_change;
+		clcsk->sk_data_ready = smc_fback_data_ready;
+		clcsk->sk_write_space = smc_fback_write_space;
+		clcsk->sk_error_report = smc_fback_error_report;
+
+		smc->clcsock->sk->sk_user_data =
+			(void *)((uintptr_t)smc | SK_USER_DATA_NOCOPY);
 	}
 	mutex_unlock(&smc->clcsock_release_lock);
 	return 0;
@@ -2111,10 +2215,9 @@ out:
 
 static void smc_clcsock_data_ready(struct sock *listen_clcsock)
 {
-	struct smc_sock *lsmc;
+	struct smc_sock *lsmc =
+		smc_clcsock_user_data(listen_clcsock);
 
-	lsmc = (struct smc_sock *)
-	       ((uintptr_t)listen_clcsock->sk_user_data & ~SK_USER_DATA_NOCOPY);
 	if (!lsmc)
 		return;
 	lsmc->clcsk_data_ready(listen_clcsock);
net/smc/smc.h +19 -1
@@ -139,6 +139,12 @@ enum smc_urg_state {
 	SMC_URG_READ	= 3,			/* data was already read */
 };
 
+struct smc_mark_woken {
+	bool woken;
+	void *key;
+	wait_queue_entry_t wait_entry;
+};
+
 struct smc_connection {
 	struct rb_node		alert_node;
 	struct smc_link_group	*lgr;		/* link group of connection */
@@ -227,8 +233,14 @@ struct smc_connection {
 struct smc_sock {				/* smc sock container */
 	struct sock		sk;
 	struct socket		*clcsock;	/* internal tcp socket */
+	void			(*clcsk_state_change)(struct sock *sk);
+						/* original stat_change fct. */
 	void			(*clcsk_data_ready)(struct sock *sk);
-						/* original data_ready fct. **/
+						/* original data_ready fct. */
+	void			(*clcsk_write_space)(struct sock *sk);
+						/* original write_space fct. */
+	void			(*clcsk_error_report)(struct sock *sk);
+						/* original error_report fct. */
 	struct smc_connection	conn;		/* smc connection */
 	struct smc_sock		*listen_smc;	/* listen parent */
 	struct work_struct	connect_work;	/* handle non-blocking connect*/
@@ -263,6 +275,12 @@ static inline struct smc_sock *smc_sk(co
 	return (struct smc_sock *)sk;
 }
 
+static inline struct smc_sock *smc_clcsock_user_data(struct sock *clcsk)
+{
+	return (struct smc_sock *)
+	       ((uintptr_t)clcsk->sk_user_data & ~SK_USER_DATA_NOCOPY);
+}
+
 extern struct workqueue_struct	*smc_hs_wq;	/* wq for handshake work */
 extern struct workqueue_struct	*smc_close_wq;	/* wq for close work */
 
author maintainer
#71 lore raw

PATCH 71/126 net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request.

In reply to Greg Kroah-Hartman

From: Yuji Ishikawa <[email protected]>

commit 928d6fe996f69330ded6b887baf4534c5fac7988 upstream.

Variable clk_sel_val is not initialized in the default case of the first switch statement. In that case, the function should return immediately without any changes to the hardware.

Fixes b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c +7 -2
@@ -49,13 +49,15 @@ struct visconti_eth {
 	void __iomem *reg;
 	u32 phy_intf_sel;
 	struct clk *phy_ref_clk;
+	struct device *dev;
 	spinlock_t lock; /* lock to protect register update */
 };
 
 static void visconti_eth_fix_mac_speed(void *priv, unsigned int speed)
 {
 	struct visconti_eth *dwmac = priv;
-	unsigned int val, clk_sel_val;
+	struct net_device *netdev = dev_get_drvdata(dwmac->dev);
+	unsigned int val, clk_sel_val = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dwmac->lock, flags);
@@ -85,7 +87,9 @@ static void visconti_eth_fix_mac_speed(v
 		break;
 	default:
 		/* No bit control */
-		break;
+		netdev_err(netdev, "Unsupported speed request (%d)", speed);
+		spin_unlock_irqrestore(&dwmac->lock, flags);
+		return;
 	}
 
 	writel(val, dwmac->reg + MAC_CTRL_REG);
@@ -229,6 +233,7 @@ static int visconti_eth_dwmac_probe(stru
 
 	spin_lock_init(&dwmac->lock);
 	dwmac->reg = stmmac_res.addr;
+	dwmac->dev = &pdev->dev;
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->fix_mac_speed = visconti_eth_fix_mac_speed;
 
author maintainer
#72 lore raw

PATCH 72/126 net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()

In reply to Greg Kroah-Hartman

From: Jisheng Zhang <[email protected]>

commit 6449520391dfc3d2cef134f11a91251a054ff7d0 upstream.

There are two issues with runtime pm handling in stmmac_dvr_remove():

1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back.

2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove()
stmmac_remove_config_dt()
clk_disable_unprepare()
CCF will complain this time. The error handling code path suffers from the similar situtaion.

Here are kernel warnings in error handling code path on Allwinner D1 platform:

[    1.604695] ------------[ cut here ]------------
[    1.609328] bus-emac already disabled
[    1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[    1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
[    1.627653] Hardware name: Allwinner D1 NeZha (DT)
[    1.632443] Workqueue: events_unbound deferred_probe_work_func
[    1.638286] epc : clk_core_disable+0xcc/0xec
[    1.642561]  ra : clk_core_disable+0xcc/0xec
[    1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
[    1.654054]  gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
[    1.661272]  t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
[    1.668489]  s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
[    1.675707]  a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
[    1.682924]  a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
[    1.690141]  s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
[    1.697358]  s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[    1.704577]  s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[    1.711794]  s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
[    1.719012]  t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
[    1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
[    1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
[    1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
[    1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
[    1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[    1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[    1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[    1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[    1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[    1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[    1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[    1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[    1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[    1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[    1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[    1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[    1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[    1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[    1.852054] [<ffffffff80026564>] kthread+0x124/0x160
[    1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[    1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[    1.868956] ---[ end trace 8d5c6046255f84a0 ]---
[    1.873675] ------------[ cut here ]------------
[    1.878366] bus-emac already unprepared
[    1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[    1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G        W	5.14.0-rc4 #1
[    1.898674] Hardware name: Allwinner D1 NeZha (DT)
[    1.903464] Workqueue: events_unbound deferred_probe_work_func
[    1.909305] epc : clk_core_unprepare+0xe4/0x168
[    1.913840]  ra : clk_core_unprepare+0xe4/0x168
[    1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
[    1.925593]  gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
[    1.932811]  t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
[    1.940029]  s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
[    1.947246]  a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
[    1.954463]  a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
[    1.961680]  s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
[    1.968898]  s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[    1.976115]  s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[    1.983333]  s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
[    1.990550]  t5 : 0000000000000000 t6 : ffffffe001600002
[    1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
[    2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
[    2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
[    2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
[    2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[    2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[    2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[    2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[    2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[    2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[    2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[    2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[    2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[    2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[    2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[    2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[    2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[    2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[    2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[    2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[    2.118551] [<ffffffff80026564>] kthread+0x124/0x160
[    2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[    2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[    2.135455] ---[ end trace 8d5c6046255f84a1 ]---
Fixes 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +4 -2
@@ -7137,6 +7137,10 @@ int stmmac_dvr_remove(struct device *dev
 
 	netdev_info(priv->dev, "%s: removing driver", __func__);
 
+	pm_runtime_get_sync(dev);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+
 	stmmac_stop_all_dma(priv);
 	stmmac_mac_set(priv, priv->ioaddr, false);
 	netif_carrier_off(ndev);
@@ -7155,8 +7159,6 @@ int stmmac_dvr_remove(struct device *dev
 	if (priv->plat->stmmac_rst)
 		reset_control_assert(priv->plat->stmmac_rst);
 	reset_control_assert(priv->plat->stmmac_ahb_rst);
-	pm_runtime_put(dev);
-	pm_runtime_disable(dev);
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
author maintainer
#73 lore raw

PATCH 73/126 net: macsec: Fix offload support for NETDEV_UNREGISTER event

In reply to Greg Kroah-Hartman

From: Lior Nahmanson <[email protected]>

commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream.

Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources.

Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event.

---
 drivers/net/macsec.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/net/macsec.c +12 -12
@@ -3870,6 +3870,18 @@ static void macsec_common_dellink(struct
 	struct macsec_dev *macsec = macsec_priv(dev);
 	struct net_device *real_dev = macsec->real_dev;
 
+	/* If h/w offloading is available, propagate to the device */
+	if (macsec_is_offloaded(macsec)) {
+		const struct macsec_ops *ops;
+		struct macsec_context ctx;
+
+		ops = macsec_get_ops(netdev_priv(dev), &ctx);
+		if (ops) {
+			ctx.secy = &macsec->secy;
+			macsec_offload(ops->mdo_del_secy, &ctx);
+		}
+	}
+
 	unregister_netdevice_queue(dev, head);
 	list_del_rcu(&macsec->secys);
 	macsec_del_dev(macsec);
@@ -3884,18 +3896,6 @@ static void macsec_dellink(struct net_de
 	struct net_device *real_dev = macsec->real_dev;
 	struct macsec_rxh_data *rxd = macsec_data_rtnl(real_dev);
 
-	/* If h/w offloading is available, propagate to the device */
-	if (macsec_is_offloaded(macsec)) {
-		const struct macsec_ops *ops;
-		struct macsec_context ctx;
-
-		ops = macsec_get_ops(netdev_priv(dev), &ctx);
-		if (ops) {
-			ctx.secy = &macsec->secy;
-			macsec_offload(ops->mdo_del_secy, &ctx);
-		}
-	}
-
 	macsec_common_dellink(dev, head);
 
 	if (list_empty(&rxd->secys)) {
author maintainer
#74 lore raw

PATCH 74/126 net: macsec: Verify that send_sci is on when setting Tx sci explicitly

In reply to Greg Kroah-Hartman

From: Lior Nahmanson <[email protected]>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci.

Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases.

---
 drivers/net/macsec.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/macsec.c +9 -0
@@ -4018,6 +4018,15 @@ static int macsec_newlink(struct net *ne
 	    !macsec_check_offload(macsec->offload, macsec))
 		return -EOPNOTSUPP;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
author maintainer
#75 lore raw

PATCH 75/126 net: stmmac: dump gmac4 DMA registers correctly

In reply to Greg Kroah-Hartman

From: Camel Guo <[email protected]>

commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream.

Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers.

This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0":

BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
 kasan_report+0x200/0x21c
 __asan_report_store4_noabort+0x34/0x60
 dwmac4_dump_dma_regs+0x6d4/0xb30
 stmmac_ethtool_gregs+0x110/0x204
 ethtool_get_regs+0x200/0x4b0
 dev_ethtool+0x1dac/0x3800
 dev_ioctl+0x7c0/0xb50
 sock_ioctl+0x298/0x6c4
 ...
Fixes fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h      |    1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c |   19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +1 -0
@@ -150,6 +150,7 @@
 
 #define NUM_DWMAC100_DMA_REGS	9
 #define NUM_DWMAC1000_DMA_REGS	23
+#define NUM_DWMAC4_DMA_REGS	27
 
 void dwmac_enable_dma_transmission(void __iomem *ioaddr);
 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx);
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +17 -2
@@ -21,10 +21,18 @@
 #include "dwxgmac2.h"
 
 #define REG_SPACE_SIZE	0x1060
+#define GMAC4_REG_SPACE_SIZE	0x116C
 #define MAC100_ETHTOOL_NAME	"st_mac100"
 #define GMAC_ETHTOOL_NAME	"st_gmac"
 #define XGMAC_ETHTOOL_NAME	"st_xgmac"
 
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h
+ *
+ * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the
+ * same time due to the conflicting macro names.
+ */
+#define GMAC4_DMA_CHAN_BASE_ADDR  0x00001100
+
 #define ETHTOOL_DMA_OFFSET	55
 
 struct stmmac_stats {
@@ -435,6 +443,8 @@ static int stmmac_ethtool_get_regs_len(s
 
 	if (priv->plat->has_xgmac)
 		return XGMAC_REGSIZE * 4;
+	else if (priv->plat->has_gmac4)
+		return GMAC4_REG_SPACE_SIZE;
 	return REG_SPACE_SIZE;
 }
 
@@ -447,8 +457,13 @@ static void stmmac_ethtool_gregs(struct
 	stmmac_dump_mac_regs(priv, priv->hw, reg_space);
 	stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
 
-	if (!priv->plat->has_xgmac) {
-		/* Copy DMA registers to where ethtool expects them */
+	/* Copy DMA registers to where ethtool expects them */
+	if (priv->plat->has_gmac4) {
+		/* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */
+		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
+		       &reg_space[GMAC4_DMA_CHAN_BASE_ADDR / 4],
+		       NUM_DWMAC4_DMA_REGS * 4);
+	} else if (!priv->plat->has_xgmac) {
 		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
 		       &reg_space[DMA_BUS_MODE / 4],
 		       NUM_DWMAC1000_DMA_REGS * 4);
author maintainer
#76 lore raw

PATCH 76/126 net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work

In reply to Greg Kroah-Hartman

From: Daniel Borkmann <[email protected]>

commit 4a81f6da9cb2d1ef911131a6fd8bd15cb61fc772 upstream.

syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:

kworker/0:16/14617 is trying to acquire lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...]
but task is already holding lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572

The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce arp latency") via neigh_probe() given table lock was held.

One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present.

The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe().

[0] <TASK>

  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
  print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
  check_deadlock kernel/locking/lockdep.c:2999 [inline]
  validate_chain kernel/locking/lockdep.c:3788 [inline]
  __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
  lock_acquire kernel/locking/lockdep.c:5639 [inline]
  lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
  _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
  ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
  ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
  __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
  __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
  ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
  NF_HOOK_COND include/linux/netfilter.h:296 [inline]
  ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
  dst_output include/net/dst.h:451 [inline]
  NF_HOOK include/linux/netfilter.h:307 [inline]
  ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
  ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
  ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
  neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
  __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
  neigh_event_send include/net/neighbour.h:470 [inline]
  neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
  process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
  worker_thread+0x657/0x1110 kernel/workqueue.c:2454
  kthread+0x2e9/0x3a0 kernel/kthread.c:377
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
  </TASK>
Fixes 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by [email protected]
Cc Eric Dumazet <[email protected]>
Cc Roopa Prabhu <[email protected]>
---
 include/net/neighbour.h |   18 +++++++++++++-----
 net/core/neighbour.c    |   18 ++++++++++++------
 2 files changed, 25 insertions(+), 11 deletions(-)
include/net/neighbour.h +13 -5
@@ -336,7 +336,8 @@ static inline struct neighbour *neigh_cr
 	return __neigh_create(tbl, pkey, dev, true);
 }
 void neigh_destroy(struct neighbour *neigh);
-int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb);
+int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb,
+		       const bool immediate_ok);
 int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, u32 flags,
 		 u32 nlmsg_pid);
 void __neigh_set_probe_once(struct neighbour *neigh);
@@ -446,17 +447,24 @@ static inline struct neighbour * neigh_c
 
 #define neigh_hold(n)	refcount_inc(&(n)->refcnt)
 
-static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
+static __always_inline int neigh_event_send_probe(struct neighbour *neigh,
+						  struct sk_buff *skb,
+						  const bool immediate_ok)
 {
 	unsigned long now = jiffies;
-	
+
 	if (READ_ONCE(neigh->used) != now)
 		WRITE_ONCE(neigh->used, now);
-	if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
-		return __neigh_event_send(neigh, skb);
+	if (!(neigh->nud_state & (NUD_CONNECTED | NUD_DELAY | NUD_PROBE)))
+		return __neigh_event_send(neigh, skb, immediate_ok);
 	return 0;
 }
 
+static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
+{
+	return neigh_event_send_probe(neigh, skb, true);
+}
+
 #if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
 static inline int neigh_hh_bridge(struct hh_cache *hh, struct sk_buff *skb)
 {
net/core/neighbour.c +12 -6
@@ -1133,7 +1133,8 @@ out:
 	neigh_release(neigh);
 }
 
-int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
+int __neigh_event_send(struct neighbour *neigh, struct sk_buff *skb,
+		       const bool immediate_ok)
 {
 	int rc;
 	bool immediate_probe = false;
@@ -1154,12 +1155,17 @@ int __neigh_event_send(struct neighbour
 			atomic_set(&neigh->probes,
 				   NEIGH_VAR(neigh->parms, UCAST_PROBES));
 			neigh_del_timer(neigh);
-			neigh->nud_state     = NUD_INCOMPLETE;
+			neigh->nud_state = NUD_INCOMPLETE;
 			neigh->updated = now;
-			next = now + max(NEIGH_VAR(neigh->parms, RETRANS_TIME),
-					 HZ/100);
+			if (!immediate_ok) {
+				next = now + 1;
+			} else {
+				immediate_probe = true;
+				next = now + max(NEIGH_VAR(neigh->parms,
+							   RETRANS_TIME),
+						 HZ / 100);
+			}
 			neigh_add_timer(neigh, next);
-			immediate_probe = true;
 		} else {
 			neigh->nud_state = NUD_FAILED;
 			neigh->updated = jiffies;
@@ -1571,7 +1577,7 @@ static void neigh_managed_work(struct wo
 
 	write_lock_bh(&tbl->lock);
 	list_for_each_entry(neigh, &tbl->managed_list, managed_list)
-		neigh_event_send(neigh, NULL);
+		neigh_event_send_probe(neigh, NULL, false);
 	queue_delayed_work(system_power_efficient_wq, &tbl->managed_work,
 			   NEIGH_VAR(&tbl->parms, DELAY_PROBE_TIME));
 	write_unlock_bh(&tbl->lock);
author maintainer
#77 lore raw

PATCH 77/126 net: stmmac: ensure PTP time register reads are consistent

In reply to Greg Kroah-Hartman

From: Yannick Vignon <[email protected]>

commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.

Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +11 -6
@@ -145,15 +145,20 @@ static int adjust_systime(void __iomem *
 
 static void get_systime(void __iomem *ioaddr, u64 *systime)
 {
-	u64 ns;
+	u64 ns, sec0, sec1;
 
-	/* Get the TSSS value */
-	ns = readl(ioaddr + PTP_STNSR);
-	/* Get the TSS and convert sec time value to nanosecond */
-	ns += readl(ioaddr + PTP_STSR) * 1000000000ULL;
+	/* Get the TSS value */
+	sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	do {
+		sec0 = sec1;
+		/* Get the TSSS value */
+		ns = readl_relaxed(ioaddr + PTP_STNSR);
+		/* Get the TSS value */
+		sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	} while (sec0 != sec1);
 
 	if (systime)
-		*systime = ns;
+		*systime = ns + (sec1 * 1000000000ULL);
 }
 
 static void get_ptptime(void __iomem *ptpaddr, u64 *ptp_time)
author maintainer
#78 lore raw

PATCH 78/126 drm: mxsfb: Fix NULL pointer dereference

In reply to Greg Kroah-Hartman

From: Alexander Stein <[email protected]>

commit 622c9a3a7868e1eeca39c55305ca3ebec4742b64 upstream.

mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead.

Fixes b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
---
 drivers/gpu/drm/mxsfb/mxsfb_kms.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/mxsfb/mxsfb_kms.c +5 -1
@@ -361,7 +361,11 @@ static void mxsfb_crtc_atomic_enable(str
 		bridge_state =
 			drm_atomic_get_new_bridge_state(state,
 							mxsfb->bridge);
-		bus_format = bridge_state->input_bus_cfg.format;
+		if (!bridge_state)
+			bus_format = MEDIA_BUS_FMT_FIXED;
+		else
+			bus_format = bridge_state->input_bus_cfg.format;
+
 		if (bus_format == MEDIA_BUS_FMT_FIXED) {
 			dev_warn_once(drm->dev,
 				      "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
author maintainer
#79 lore raw

PATCH 79/126 drm/kmb: Fix for build errors with Warray-bounds

In reply to Greg Kroah-Hartman

From: Anitha Chrisanthus <[email protected]>

commit 43f2517955875be5d96b641fba33d73097fe3cd9 upstream.

This fixes the following build error

drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable':
drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds]
165 | kmb->plane_status[plane_id].ctrl =
LCD_CTRL_GL2_ENABLE;
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~
In file included from drivers/gpu/drm/kmb/kmb_plane.c:17:
drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
61 | struct layer_status plane_status[KMB_MAX_PLANES];
| ^~~~~~~~~~~~
drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE;
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~
In file included from
drivers/gpu/drm/kmb/kmb_plane.c:17:
drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status'
61 | struct layer_status plane_status[KMB_MAX_PLANES];
|
^~~~~~~~~~~~

---
 drivers/gpu/drm/kmb/kmb_plane.c |    6 ------
 1 file changed, 6 deletions(-)
drivers/gpu/drm/kmb/kmb_plane.c +0 -6
@@ -158,12 +158,6 @@ static void kmb_plane_atomic_disable(str
 	case LAYER_1:
 		kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE;
 		break;
-	case LAYER_2:
-		kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE;
-		break;
-	case LAYER_3:
-		kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE;
-		break;
 	}
 
 	kmb->plane_status[plane_id].disable = true;
author maintainer
#80 lore raw

PATCH 80/126 drm/i915/overlay: Prevent divide by zero bugs in scaling

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.

Smatch detected a divide by zero bug in check_overlay_scaling().

    drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_height'.
    drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_width'.

Prevent this by ensuring that the dst height and width are non-zero.

Fixes 02e792fbaadb ("drm/i915: implement drmmode overlay support v4")
(cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918)
---
 drivers/gpu/drm/i915/display/intel_overlay.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/i915/display/intel_overlay.c +3 -0
@@ -959,6 +959,9 @@ static int check_overlay_dst(struct inte
 	const struct intel_crtc_state *pipe_config =
 		overlay->crtc->config;
 
+	if (rec->dst_height == 0 || rec->dst_width == 0)
+		return -EINVAL;
+
 	if (rec->dst_x < pipe_config->pipe_src_w &&
 	    rec->dst_x + rec->dst_width <= pipe_config->pipe_src_w &&
 	    rec->dst_y < pipe_config->pipe_src_h &&
author maintainer
#81 lore raw

PATCH 81/126 drm/i915: Lock timeline mutex directly in error path of eb_pin_timeline

In reply to Greg Kroah-Hartman

From: Matthew Brost <[email protected]>

commit 5ae13c305ef8cb54efc4f0ba4565709b9f320fed upstream.

Don't use the interruptable version of the timeline mutex lock in the error path of eb_pin_timeline as the cleanup must always happen.

v2:
(John Harrison)
- Don't check for interrupt during mutex lock
v3:
(Tvrtko)
- A comment explaining why lock helper isn't used

Fixes 544460c33821 ("drm/i915: Multi-BB execbuf")
(cherry picked from commit cb935c4618bd2ff9058feee4af7088446da6a763)
---
 drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +7 -2
@@ -2372,9 +2372,14 @@ static int eb_pin_timeline(struct i915_e
 				      timeout) < 0) {
 			i915_request_put(rq);
 
-			tl = intel_context_timeline_lock(ce);
+			/*
+			 * Error path, cannot use intel_context_timeline_lock as
+			 * that is user interruptable and this clean up step
+			 * must be done.
+			 */
+			mutex_lock(&ce->timeline->mutex);
 			intel_context_exit(ce);
-			intel_context_timeline_unlock(tl);
+			mutex_unlock(&ce->timeline->mutex);
 
 			if (nonblock)
 				return -EWOULDBLOCK;
author maintainer
#82 lore raw

PATCH 82/126 drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled

In reply to Greg Kroah-Hartman

From: Mario Limonciello <[email protected]>

commit e55a3aea418269266d84f426b3bd70794d3389c8 upstream.

dGPUs connected to Intel systems configured for suspend to idle will not have the power rails cut at suspend and resetting the GPU may lead to problematic behaviors.

Fixes e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +1 -2
@@ -2241,8 +2241,7 @@ static int amdgpu_pmops_prepare(struct d
 	 * DPM_FLAG_SMART_SUSPEND works properly
 	 */
 	if (amdgpu_device_supports_boco(drm_dev))
-		return pm_runtime_suspended(dev) &&
-			pm_suspend_via_firmware();
+		return pm_runtime_suspended(dev);
 
 	return 0;
 }
author maintainer
#83 lore raw

PATCH 83/126 ASoC: rt5682: Fix deadlock on resume

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

commit 4045daf0fa87846a27f56329fddad2deeb5ca354 upstream.

On resume from suspend the following chain of events can happen:
A rt5682_resume() -> mod_delayed_work() for jack_detect_work B DAPM sequence starts ( DAPM is locked now)

A1. rt5682_jack_detect_handler() scheduled
- Takes both jdet_mutex and calibrate_mutex
- Calls in to rt5682_headset_detect() which tries to take DAPM lock, it starts to wait for it as B path took it already.
B1. DAPM sequence reaches the "HP Amp", rt5682_hp_event() tries to take
the jdet_mutex, but it is locked in A1, so it waits.

Deadlock.

To solve the deadlock, drop the jdet_mutex, use the jack_detect_work to do the jack removal handling, move the dapm lock up one level to protect the most of the rt5682_jack_detect_handler(), but not the jack reporting as it might trigger a DAPM sequence.
The rt5682_headset_detect() can be changed to static as well.

Fixes 8deb34a90f063 ("ASoC: rt5682: fix the wrong jack type detected")
---
 sound/soc/codecs/rt5682-i2c.c |   15 ++++-----------
 sound/soc/codecs/rt5682.c     |   24 ++++++++----------------
 sound/soc/codecs/rt5682.h     |    2 --
 3 files changed, 12 insertions(+), 29 deletions(-)
sound/soc/codecs/rt5682-i2c.c +4 -11
@@ -59,18 +59,12 @@ static void rt5682_jd_check_handler(stru
 	struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv,
 		jd_check_work.work);
 
-	if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL)
-		& RT5682_JDH_RS_MASK) {
+	if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) & RT5682_JDH_RS_MASK)
 		/* jack out */
-		rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0);
-
-		snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type,
-			SND_JACK_HEADSET |
-			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-			SND_JACK_BTN_2 | SND_JACK_BTN_3);
-	} else {
+		mod_delayed_work(system_power_efficient_wq,
+				 &rt5682->jack_detect_work, 0);
+	else
 		schedule_delayed_work(&rt5682->jd_check_work, 500);
-	}
 }
 
 static irqreturn_t rt5682_irq(int irq, void *data)
@@ -198,7 +192,6 @@ static int rt5682_i2c_probe(struct i2c_c
 	}
 
 	mutex_init(&rt5682->calibrate_mutex);
-	mutex_init(&rt5682->jdet_mutex);
 	rt5682_calibrate(rt5682);
 
 	rt5682_apply_patch_list(rt5682, &i2c->dev);
sound/soc/codecs/rt5682.c +8 -16
@@ -922,15 +922,13 @@ static void rt5682_enable_push_button_ir
  *
  * Returns detect status.
  */
-int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
+static int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
 	struct snd_soc_dapm_context *dapm = &component->dapm;
 	unsigned int val, count;
 
 	if (jack_insert) {
-		snd_soc_dapm_mutex_lock(dapm);
-
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_1,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB);
@@ -981,8 +979,6 @@ int rt5682_headset_detect(struct snd_soc
 		snd_soc_component_update_bits(component, RT5682_MICBIAS_2,
 			RT5682_PWR_CLK25M_MASK | RT5682_PWR_CLK1M_MASK,
 			RT5682_PWR_CLK25M_PU | RT5682_PWR_CLK1M_PU);
-
-		snd_soc_dapm_mutex_unlock(dapm);
 	} else {
 		rt5682_enable_push_button_irq(component, false);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
@@ -1011,7 +1007,6 @@ int rt5682_headset_detect(struct snd_soc
 	dev_dbg(component->dev, "jack_type = %d\n", rt5682->jack_type);
 	return rt5682->jack_type;
 }
-EXPORT_SYMBOL_GPL(rt5682_headset_detect);
 
 static int rt5682_set_jack_detect(struct snd_soc_component *component,
 		struct snd_soc_jack *hs_jack, void *data)
@@ -1094,6 +1089,7 @@ void rt5682_jack_detect_handler(struct w
 {
 	struct rt5682_priv *rt5682 =
 		container_of(work, struct rt5682_priv, jack_detect_work.work);
+	struct snd_soc_dapm_context *dapm;
 	int val, btn_type;
 
 	while (!rt5682->component)
@@ -1102,7 +1098,9 @@ void rt5682_jack_detect_handler(struct w
 	while (!rt5682->component->card->instantiated)
 		usleep_range(10000, 15000);
 
-	mutex_lock(&rt5682->jdet_mutex);
+	dapm = snd_soc_component_get_dapm(rt5682->component);
+
+	snd_soc_dapm_mutex_lock(dapm);
 	mutex_lock(&rt5682->calibrate_mutex);
 
 	val = snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL)
@@ -1162,6 +1160,9 @@ void rt5682_jack_detect_handler(struct w
 		rt5682->irq_work_delay_time = 50;
 	}
 
+	mutex_unlock(&rt5682->calibrate_mutex);
+	snd_soc_dapm_mutex_unlock(dapm);
+
 	snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type,
 		SND_JACK_HEADSET |
 		SND_JACK_BTN_0 | SND_JACK_BTN_1 |
@@ -1174,9 +1175,6 @@ void rt5682_jack_detect_handler(struct w
 		else
 			cancel_delayed_work_sync(&rt5682->jd_check_work);
 	}
-
-	mutex_unlock(&rt5682->calibrate_mutex);
-	mutex_unlock(&rt5682->jdet_mutex);
 }
 EXPORT_SYMBOL_GPL(rt5682_jack_detect_handler);
 
@@ -1526,7 +1524,6 @@ static int rt5682_hp_event(struct snd_so
 {
 	struct snd_soc_component *component =
 		snd_soc_dapm_to_component(w->dapm);
-	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
@@ -1538,17 +1535,12 @@ static int rt5682_hp_event(struct snd_so
 			RT5682_DEPOP_1, 0x60, 0x60);
 		snd_soc_component_update_bits(component,
 			RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0080);
-
-		mutex_lock(&rt5682->jdet_mutex);
-
 		snd_soc_component_update_bits(component, RT5682_HP_CTRL_2,
 			RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN,
 			RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN);
 		usleep_range(5000, 10000);
 		snd_soc_component_update_bits(component, RT5682_CHARGE_PUMP_1,
 			RT5682_CP_SW_SIZE_MASK, RT5682_CP_SW_SIZE_L);
-
-		mutex_unlock(&rt5682->jdet_mutex);
 		break;
 
 	case SND_SOC_DAPM_POST_PMD:
sound/soc/codecs/rt5682.h +0 -2
@@ -1463,7 +1463,6 @@ struct rt5682_priv {
 
 	int jack_type;
 	int irq_work_delay_time;
-	struct mutex jdet_mutex;
 };
 
 extern const char *rt5682_supply_names[RT5682_NUM_SUPPLIES];
@@ -1473,7 +1472,6 @@ int rt5682_sel_asrc_clk_src(struct snd_s
 
 void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev);
 
-int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert);
 void rt5682_jack_detect_handler(struct work_struct *work);
 
 bool rt5682_volatile_register(struct device *dev, unsigned int reg);
author maintainer
#84 lore raw

PATCH 84/126 ASoC: fsl: Add missing error handling in pcm030_fabric_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del() before return from pcm030_fabric_probe in the error handling case.

Fixes c912fa913446 ("ASoC: fsl: register the wm9712-codec")
---
 sound/soc/fsl/pcm030-audio-fabric.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
sound/soc/fsl/pcm030-audio-fabric.c +8 -3
@@ -93,16 +93,21 @@ static int pcm030_fabric_probe(struct pl
 		dev_err(&op->dev, "platform_device_alloc() failed\n");
 
 	ret = platform_device_add(pdata->codec_device);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
+		platform_device_put(pdata->codec_device);
+	}
 
 	ret = snd_soc_register_card(card);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+		platform_device_del(pdata->codec_device);
+		platform_device_put(pdata->codec_device);
+	}
 
 	platform_set_drvdata(op, pdata);
-
 	return ret;
+
 }
 
 static int pcm030_fabric_remove(struct platform_device *op)
author maintainer
#85 lore raw

PATCH 85/126 ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream.

This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make buffer bytes multiple of period bytes" by Devarsh Thakkar. The same issue exists in the mainline version of the driver. The original patch description is as follows:

"The Xilinx Audio Formatter IP has a constraint on period bytes to be multiple of 64. This leads to driver changing the period size to suitable frames such that period bytes are multiple of 64.

Now since period bytes and period size are updated but not the buffer bytes, this may make the buffer bytes unaligned and not multiple of period bytes.

When this happens we hear popping noise as while DMA is being done the buffer bytes are not enough to complete DMA access for last period of frame within the application buffer boundary.

To avoid this, align buffer bytes too as multiple of 64, and set another constraint to always enforce number of periods as integer. Now since, there is already a rule in alsa core to enforce Buffer size = Number of Periods * Period Size this automatically aligns buffer bytes as multiple of period bytes."

Fixes 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Cc Devarsh Thakkar <[email protected]>
---
 sound/soc/xilinx/xlnx_formatter_pcm.c |   27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)
sound/soc/xilinx/xlnx_formatter_pcm.c +24 -3
@@ -37,6 +37,7 @@
 #define XLNX_AUD_XFER_COUNT	0x28
 #define XLNX_AUD_CH_STS_START	0x2C
 #define XLNX_BYTES_PER_CH	0x44
+#define XLNX_AUD_ALIGN_BYTES	64
 
 #define AUD_STS_IOC_IRQ_MASK	BIT(31)
 #define AUD_STS_CH_STS_MASK	BIT(29)
@@ -368,12 +369,32 @@ static int xlnx_formatter_pcm_open(struc
 	snd_soc_set_runtime_hwparams(substream, &xlnx_pcm_hardware);
 	runtime->private_data = stream_data;
 
-	/* Resize the period size divisible by 64 */
+	/* Resize the period bytes as divisible by 64 */
 	err = snd_pcm_hw_constraint_step(runtime, 0,
-					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64);
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
 	if (err) {
 		dev_err(component->dev,
-			"unable to set constraint on period bytes\n");
+			"Unable to set constraint on period bytes\n");
+		return err;
+	}
+
+	/* Resize the buffer bytes as divisible by 64 */
+	err = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
+	if (err) {
+		dev_err(component->dev,
+			"Unable to set constraint on buffer bytes\n");
+		return err;
+	}
+
+	/* Set periods as integer multiple */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		dev_err(component->dev,
+			"Unable to set constraint on periods to be integer\n");
 		return err;
 	}
 
author maintainer
#86 lore raw

PATCH 86/126 ASoC: simple-card: fix probe failure on platform component

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit a64067f4cecaaa4deed8e33d3266bc0bcc189142 upstream.

A previous change to simple-card resulted in asoc_simple_parse_dai attempting to retrieve the dai_name for platform components, which are unlikely to have a valid DAI name. This caused simple-card to fail to probe when using the xlnx_formatter_pcm as the platform component, since it does not register any DAI components.

Since the dai_name is not used for platform components, just skip trying to retrieve it for those.

Fixes f107294c6422 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
---
 sound/soc/generic/simple-card.c |   26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
sound/soc/generic/simple-card.c +25 -1
@@ -28,6 +28,30 @@ static const struct snd_soc_ops simple_o
 	.hw_params	= asoc_simple_hw_params,
 };
 
+static int asoc_simple_parse_platform(struct device_node *node,
+				      struct snd_soc_dai_link_component *dlc)
+{
+	struct of_phandle_args args;
+	int ret;
+
+	if (!node)
+		return 0;
+
+	/*
+	 * Get node via "sound-dai = <&phandle port>"
+	 * it will be used as xxx_of_node on soc_bind_dai_link()
+	 */
+	ret = of_parse_phandle_with_args(node, DAI, CELL, 0, &args);
+	if (ret)
+		return ret;
+
+	/* dai_name is not required and may not exist for plat component */
+
+	dlc->of_node = args.np;
+
+	return 0;
+}
+
 static int asoc_simple_parse_dai(struct device_node *node,
 				 struct snd_soc_dai_link_component *dlc,
 				 int *is_single_link)
@@ -289,7 +313,7 @@ static int simple_dai_link_of(struct aso
 	if (ret < 0)
 		goto dai_link_of_err;
 
-	ret = asoc_simple_parse_dai(plat, platforms, NULL);
+	ret = asoc_simple_parse_platform(plat, platforms);
 	if (ret < 0)
 		goto dai_link_of_err;
 
author maintainer
#87 lore raw

PATCH 87/126 ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.

If the device does not exist, of_get_child_by_name() will return NULL pointer.
And devm_snd_soc_register_component() does not check it. Also, I have noticed that cpcap_codec_driver has not been used yet. Therefore, it should be better to check it in order to avoid the future dereference of the NULL pointer.

---
 sound/soc/codecs/cpcap.c |    2 ++
 1 file changed, 2 insertions(+)
sound/soc/codecs/cpcap.c +2 -0
@@ -1667,6 +1667,8 @@ static int cpcap_codec_probe(struct plat
 {
 	struct device_node *codec_node =
 		of_get_child_by_name(pdev->dev.parent->of_node, "audio-codec");
+	if (!codec_node)
+		return -ENODEV;
 
 	pdev->dev.of_node = codec_node;
 
author maintainer
#88 lore raw

PATCH 88/126 ASoC: max9759: fix underflow in speaker_gain_control_put()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.

Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()

    -> snd_ctl_elem_write()
      -> kctl->put()
---
 sound/soc/codecs/max9759.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/codecs/max9759.c +2 -1
@@ -64,7 +64,8 @@ static int speaker_gain_control_put(stru
 	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
 	struct max9759 *priv = snd_soc_component_get_drvdata(c);
 
-	if (ucontrol->value.integer.value[0] > 3)
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 3)
 		return -EINVAL;
 
 	priv->gain = ucontrol->value.integer.value[0];
author maintainer
#89 lore raw

PATCH 89/126 ASoC: codecs: wcd938x: fix incorrect used of portid

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

commit c5c1546a654f613e291a7c5d6f3660fc1eb6d0c7 upstream.

Mixer controls have the channel id in mixer->reg, which is not same as port id. port id should be derived from chan_info array. So fix this. Without this, its possible that we could corrupt struct wcd938x_sdw_priv by accessing port_map array out of range with channel id instead of port id.

Fixes e8ba1e05bdc0 ("ASoC: codecs: wcd938x: add basic controls")
---
 sound/soc/codecs/wcd938x.c |   25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
sound/soc/codecs/wcd938x.c +14 -11
@@ -1432,14 +1432,10 @@ static int wcd938x_sdw_connect_port(stru
 	return 0;
 }
 
-static int wcd938x_connect_port(struct wcd938x_sdw_priv *wcd, u8 ch_id, u8 enable)
+static int wcd938x_connect_port(struct wcd938x_sdw_priv *wcd, u8 port_num, u8 ch_id, u8 enable)
 {
-	u8 port_num;
-
-	port_num = wcd->ch_info[ch_id].port_num;
-
 	return wcd938x_sdw_connect_port(&wcd->ch_info[ch_id],
-					&wcd->port_config[port_num],
+					&wcd->port_config[port_num - 1],
 					enable);
 }
 
@@ -2593,6 +2589,7 @@ static int wcd938x_set_compander(struct
 	struct wcd938x_priv *wcd938x = snd_soc_component_get_drvdata(component);
 	struct wcd938x_sdw_priv *wcd;
 	int value = ucontrol->value.integer.value[0];
+	int portidx;
 	struct soc_mixer_control *mc;
 	bool hphr;
 
@@ -2606,10 +2603,12 @@ static int wcd938x_set_compander(struct
 	else
 		wcd938x->comp1_enable = value;
 
+	portidx = wcd->ch_info[mc->reg].port_num;
+
 	if (value)
-		wcd938x_connect_port(wcd, mc->reg, true);
+		wcd938x_connect_port(wcd, portidx, mc->reg, true);
 	else
-		wcd938x_connect_port(wcd, mc->reg, false);
+		wcd938x_connect_port(wcd, portidx, mc->reg, false);
 
 	return 0;
 }
@@ -2882,9 +2881,11 @@ static int wcd938x_get_swr_port(struct s
 	struct wcd938x_sdw_priv *wcd;
 	struct soc_mixer_control *mixer = (struct soc_mixer_control *)kcontrol->private_value;
 	int dai_id = mixer->shift;
-	int portidx = mixer->reg;
+	int portidx, ch_idx = mixer->reg;
+
 
 	wcd = wcd938x->sdw_priv[dai_id];
+	portidx = wcd->ch_info[ch_idx].port_num;
 
 	ucontrol->value.integer.value[0] = wcd->port_enable[portidx];
 
@@ -2899,12 +2900,14 @@ static int wcd938x_set_swr_port(struct s
 	struct wcd938x_sdw_priv *wcd;
 	struct soc_mixer_control *mixer =
 		(struct soc_mixer_control *)kcontrol->private_value;
-	int portidx = mixer->reg;
+	int ch_idx = mixer->reg;
+	int portidx;
 	int dai_id = mixer->shift;
 	bool enable;
 
 	wcd = wcd938x->sdw_priv[dai_id];
 
+	portidx = wcd->ch_info[ch_idx].port_num;
 	if (ucontrol->value.integer.value[0])
 		enable = true;
 	else
@@ -2912,7 +2915,7 @@ static int wcd938x_set_swr_port(struct s
 
 	wcd->port_enable[portidx] = enable;
 
-	wcd938x_connect_port(wcd, portidx, enable);
+	wcd938x_connect_port(wcd, portidx, ch_idx, enable);
 
 	return 0;
 
author maintainer
#90 lore raw

PATCH 90/126 ASoC: codecs: lpass-rx-macro: fix sidetone register offsets

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

commit fca041a3ab70a099a6d5519ecb689b6279bd04f3 upstream.

For some reason we ended up with incorrect register offfset calcuations for sidetone. regmap clearly throw errors when accessing these incorrect registers as these do not belong to any read/write ranges. so fix them to point to correct register offsets.

Fixes f3ce6f3c9a99 ("ASoC: codecs: lpass-rx-macro: add iir widgets")
---
 sound/soc/codecs/lpass-rx-macro.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
sound/soc/codecs/lpass-rx-macro.c +4 -4
@@ -2688,8 +2688,8 @@ static uint32_t get_iir_band_coeff(struc
 	int reg, b2_reg;
 
 	/* Address does not automatically update if reading */
-	reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B1_CTL + 16 * iir_idx;
-	b2_reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B2_CTL + 16 * iir_idx;
+	reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B1_CTL + 0x80 * iir_idx;
+	b2_reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B2_CTL + 0x80 * iir_idx;
 
 	snd_soc_component_write(component, reg,
 				((band_idx * BAND_MAX + coeff_idx) *
@@ -2718,7 +2718,7 @@ static uint32_t get_iir_band_coeff(struc
 static void set_iir_band_coeff(struct snd_soc_component *component,
 			       int iir_idx, int band_idx, uint32_t value)
 {
-	int reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B2_CTL + 16 * iir_idx;
+	int reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B2_CTL + 0x80 * iir_idx;
 
 	snd_soc_component_write(component, reg, (value & 0xFF));
 	snd_soc_component_write(component, reg, (value >> 8) & 0xFF);
@@ -2739,7 +2739,7 @@ static int rx_macro_put_iir_band_audio_m
 	int iir_idx = ctl->iir_idx;
 	int band_idx = ctl->band_idx;
 	u32 coeff[BAND_MAX];
-	int reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B1_CTL + 16 * iir_idx;
+	int reg = CDC_RX_SIDETONE_IIR0_IIR_COEF_B1_CTL + 0x80 * iir_idx;
 
 	memcpy(&coeff[0], ucontrol->value.bytes.data, params->max);
 
author maintainer
#91 lore raw

PATCH 91/126 ASoC: codecs: wcd938x: fix return value of mixer put function

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

commit bd2347fd67d8da0fa76296507cc556da0a233bcb upstream.

wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and wcd938x_set_compander currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.

Fixes e8ba1e05bdc01 ("ASoC: codecs: wcd938x: add basic controls")
---
 sound/soc/codecs/wcd938x.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
sound/soc/codecs/wcd938x.c +3 -3
@@ -2559,7 +2559,7 @@ static int wcd938x_ear_pa_put_gain(struc
 				      WCD938X_EAR_GAIN_MASK,
 				      ucontrol->value.integer.value[0]);
 
-	return 0;
+	return 1;
 }
 
 static int wcd938x_get_compander(struct snd_kcontrol *kcontrol,
@@ -2610,7 +2610,7 @@ static int wcd938x_set_compander(struct
 	else
 		wcd938x_connect_port(wcd, portidx, mc->reg, false);
 
-	return 0;
+	return 1;
 }
 
 static int wcd938x_ldoh_get(struct snd_kcontrol *kcontrol,
@@ -2917,7 +2917,7 @@ static int wcd938x_set_swr_port(struct s
 
 	wcd938x_connect_port(wcd, portidx, ch_idx, enable);
 
-	return 0;
+	return 1;
 
 }
 
author maintainer
#92 lore raw

PATCH 92/126 ASoC: qdsp6: q6apm-dai: only stop graphs that are started

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

commit 8f2e5c65ec7534cce6d315fccf2c3aef023f68f0 upstream.

Its possible that the sound card is just opened and closed without actually playing stream, ex: if the audio file itself is missing.

Even in such cases we do call stop on graphs that are not yet started. DSP can throw errors in such cases, so add a check to see if the graph was started before stopping it.

Fixes 9b4fe0f1cd79 ("ASoC: qdsp6: audioreach: add q6apm-dai support")
---
 sound/soc/qcom/qdsp6/q6apm-dai.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
sound/soc/qcom/qdsp6/q6apm-dai.c +5 -2
@@ -308,8 +308,11 @@ static int q6apm_dai_close(struct snd_so
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct q6apm_dai_rtd *prtd = runtime->private_data;
 
-	q6apm_graph_stop(prtd->graph);
-	q6apm_unmap_memory_regions(prtd->graph, substream->stream);
+	if (prtd->state) { /* only stop graph that is started */
+		q6apm_graph_stop(prtd->graph);
+		q6apm_unmap_memory_regions(prtd->graph, substream->stream);
+	}
+
 	q6apm_graph_close(prtd->graph);
 	prtd->graph = NULL;
 	kfree(prtd);
author maintainer
#93 lore raw

PATCH 93/126 pinctrl: sunxi: Fix H616 I2S3 pin data

In reply to Greg Kroah-Hartman

From: Andre Przywara <[email protected]>

commit 1fd6bb5b47a65eacb063b37e6fa6df2b8fa92959 upstream.

Two bugs have sneaked in the H616 pinctrl data:
- PH9 uses the mux value of 0x3 twice (one should be 0x5 instead)
- PH8 and PH9 use the "i2s3" function name twice in each pin

For the double pin name we use the same trick we pulled for i2s0: append the pin function to the group name to designate the special function.

---
 drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c +4 -4
@@ -363,16 +363,16 @@ static const struct sunxi_desc_pin h616_
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "uart2"),		/* CTS */
-		  SUNXI_FUNCTION(0x3, "i2s3"),	/* DO0 */
+		  SUNXI_FUNCTION(0x3, "i2s3_dout0"),	/* DO0 */
 		  SUNXI_FUNCTION(0x4, "spi1"),		/* MISO */
-		  SUNXI_FUNCTION(0x5, "i2s3"),	/* DI1 */
+		  SUNXI_FUNCTION(0x5, "i2s3_din1"),	/* DI1 */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 8)),	/* PH_EINT8 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x3, "i2s3"),	/* DI0 */
+		  SUNXI_FUNCTION(0x3, "i2s3_din0"),	/* DI0 */
 		  SUNXI_FUNCTION(0x4, "spi1"),		/* CS1 */
-		  SUNXI_FUNCTION(0x3, "i2s3"),	/* DO1 */
+		  SUNXI_FUNCTION(0x5, "i2s3_dout1"),	/* DO1 */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 9)),	/* PH_EINT9 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
author maintainer
#94 lore raw

PATCH 94/126 pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

commit e12963c453263d5321a2c610e98cbc731233b685 upstream.

The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario.

When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event.

This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled.

Fixes af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
---
 drivers/pinctrl/intel/pinctrl-intel.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/pinctrl/intel/pinctrl-intel.c +2 -8
@@ -451,8 +451,8 @@ static void intel_gpio_set_gpio_mode(voi
 	value &= ~PADCFG0_PMODE_MASK;
 	value |= PADCFG0_PMODE_GPIO;
 
-	/* Disable input and output buffers */
-	value |= PADCFG0_GPIORXDIS;
+	/* Disable TX buffer and enable RX (this will be input) */
+	value &= ~PADCFG0_GPIORXDIS;
 	value |= PADCFG0_GPIOTXDIS;
 
 	/* Disable SCI/SMI/NMI generation */
@@ -497,9 +497,6 @@ static int intel_gpio_request_enable(str
 
 	intel_gpio_set_gpio_mode(padcfg0);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(padcfg0, true);
-
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 
 	return 0;
@@ -1115,9 +1112,6 @@ static int intel_gpio_irq_type(struct ir
 
 	intel_gpio_set_gpio_mode(reg);
 
-	/* Disable TX buffer and enable RX (this will be input) */
-	__intel_gpio_set_direction(reg, true);
-
 	value = readl(reg);
 
 	value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);
author maintainer
#95 lore raw

PATCH 95/126 pinctrl: intel: fix unexpected interrupt

In reply to Greg Kroah-Hartman

From: Łukasz Bartosik <[email protected]>

commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream.

ASUS Chromebook C223 with Celeron N3350 crashes sometimes during cold booot. Inspection of the kernel log showed that it gets into an inifite loop logging the following message:

->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251 ->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7 ->action(): 00000
IRQ_NOPROBE set
unexpected IRQ trap at vector 7c

The issue happens during cold boot but only if cold boot happens at most several dozen seconds after Chromebook is powered off. For longer intervals between power off and power on (cold boot) the issue does not reproduce. The unexpected interrupt is sourced from INT3452 GPIO pin which is used for SD card detect. Investigation relevealed that when the interval between power off and power on (cold boot) is less than several dozen seconds then values of INT3452 GPIO interrupt enable and interrupt pending registers survive power off and power on sequence and interrupt for SD card detect pin is enabled and pending during probe of SD controller which causes the unexpected IRQ message. "Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc mentions that GPIO interrupt enable and status registers default value is 0x0.
The fix clears INT3452 GPIO interrupt enabled and interrupt pending registers in its probe function.

Fixes 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
---
 drivers/pinctrl/intel/pinctrl-intel.c |   54 +++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 20 deletions(-)
drivers/pinctrl/intel/pinctrl-intel.c +34 -20
@@ -1210,6 +1210,39 @@ static irqreturn_t intel_gpio_irq(int ir
 	return IRQ_RETVAL(ret);
 }
 
+static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
+{
+	int i;
+
+	for (i = 0; i < pctrl->ncommunities; i++) {
+		const struct intel_community *community;
+		void __iomem *base;
+		unsigned int gpp;
+
+		community = &pctrl->communities[i];
+		base = community->regs;
+
+		for (gpp = 0; gpp < community->ngpps; gpp++) {
+			/* Mask and clear all interrupts */
+			writel(0, base + community->ie_offset + gpp * 4);
+			writel(0xffff, base + community->is_offset + gpp * 4);
+		}
+	}
+}
+
+static int intel_gpio_irq_init_hw(struct gpio_chip *gc)
+{
+	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+
+	/*
+	 * Make sure the interrupt lines are in a proper state before
+	 * further configuration.
+	 */
+	intel_gpio_irq_init(pctrl);
+
+	return 0;
+}
+
 static int intel_gpio_add_community_ranges(struct intel_pinctrl *pctrl,
 				const struct intel_community *community)
 {
@@ -1314,6 +1347,7 @@ static int intel_gpio_probe(struct intel
 	girq->num_parents = 0;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_bad_irq;
+	girq->init_hw = intel_gpio_irq_init_hw;
 
 	ret = devm_gpiochip_add_data(pctrl->dev, &pctrl->chip, pctrl);
 	if (ret) {
@@ -1689,26 +1723,6 @@ int intel_pinctrl_suspend_noirq(struct d
 }
 EXPORT_SYMBOL_GPL(intel_pinctrl_suspend_noirq);
 
-static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
-{
-	size_t i;
-
-	for (i = 0; i < pctrl->ncommunities; i++) {
-		const struct intel_community *community;
-		void __iomem *base;
-		unsigned int gpp;
-
-		community = &pctrl->communities[i];
-		base = community->regs;
-
-		for (gpp = 0; gpp < community->ngpps; gpp++) {
-			/* Mask and clear all interrupts */
-			writel(0, base + community->ie_offset + gpp * 4);
-			writel(0xffff, base + community->is_offset + gpp * 4);
-		}
-	}
-}
-
 static bool intel_gpio_update_reg(void __iomem *reg, u32 mask, u32 value)
 {
 	u32 curr, updated;
author maintainer
#96 lore raw

PATCH 96/126 pinctrl: bcm2835: Fix a few error paths

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream.

After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") a few error paths would not unwind properly the registration of gpio ranges. Correct that by assigning a single error label and goto it whenever we encounter a fatal error.

Fixes 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)
drivers/pinctrl/bcm/pinctrl-bcm2835.c +15 -8
@@ -1264,16 +1264,18 @@ static int bcm2835_pinctrl_probe(struct
 				     sizeof(*girq->parents),
 				     GFP_KERNEL);
 	if (!girq->parents) {
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto out_remove;
 	}
 
 	if (is_7211) {
 		pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS,
 					    sizeof(*pc->wake_irq),
 					    GFP_KERNEL);
-		if (!pc->wake_irq)
-			return -ENOMEM;
+		if (!pc->wake_irq) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 	}
 
 	/*
@@ -1301,8 +1303,10 @@ static int bcm2835_pinctrl_probe(struct
 
 		len = strlen(dev_name(pc->dev)) + 16;
 		name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
-		if (!name)
-			return -ENOMEM;
+		if (!name) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 
 		snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
 
@@ -1321,11 +1325,14 @@ static int bcm2835_pinctrl_probe(struct
 	err = gpiochip_add_data(&pc->gpio_chip, pc);
 	if (err) {
 		dev_err(dev, "could not add GPIO chip\n");
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return err;
+		goto out_remove;
 	}
 
 	return 0;
+
+out_remove:
+	pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
+	return err;
 }
 
 static struct platform_driver bcm2835_pinctrl_driver = {
author maintainer
#97 lore raw

PATCH 97/126 btrfs: fix use of uninitialized variable at rm device ioctl

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

commit 37b4599547e324589e011c20f74b021d6d25cb7f upstream.

Clang static analysis reports this problem ioctl.c:3333:8: warning: 3rd function call argument is an
uninitialized value
ret = exclop_start_or_cancel_reloc(fs_info,

cancel is only set in one branch of an if-check and is always used. So initialize to false.

Fixes 1a15eb724aae ("btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls")
---
 fs/btrfs/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/ioctl.c +1 -1
@@ -3310,7 +3310,7 @@ static long btrfs_ioctl_rm_dev(struct fi
 	struct block_device *bdev = NULL;
 	fmode_t mode;
 	int ret;
-	bool cancel;
+	bool cancel = false;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
author maintainer
#98 lore raw

PATCH 98/126 scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

In reply to Greg Kroah-Hartman

From: John Meneghini <[email protected]>

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section.

---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/scsi/bnx2fc/bnx2fc_fcoe.c +13 -8
@@ -508,7 +508,8 @@ static int bnx2fc_l2_rcv_thread(void *ar
 
 static void bnx2fc_recv_frame(struct sk_buff *skb)
 {
-	u32 fr_len;
+	u64 crc_err;
+	u32 fr_len, fr_crc;
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fc_stats *stats;
@@ -542,6 +543,11 @@ static void bnx2fc_recv_frame(struct sk_
 	skb_pull(skb, sizeof(struct fcoe_hdr));
 	fr_len = skb->len - sizeof(struct fcoe_crc_eof);
 
+	stats = per_cpu_ptr(lport->stats, get_cpu());
+	stats->RxFrames++;
+	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	put_cpu();
+
 	fp = (struct fc_frame *)skb;
 	fc_frame_init(fp);
 	fr_dev(fp) = lport;
@@ -624,16 +630,15 @@ static void bnx2fc_recv_frame(struct sk_
 		return;
 	}
 
-	stats = per_cpu_ptr(lport->stats, smp_processor_id());
-	stats->RxFrames++;
-	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	fr_crc = le32_to_cpu(fr_crc(fp));
 
-	if (le32_to_cpu(fr_crc(fp)) !=
-			~crc32(~0, skb->data, fr_len)) {
-		if (stats->InvalidCRCCount < 5)
+	if (unlikely(fr_crc != ~crc32(~0, skb->data, fr_len))) {
+		stats = per_cpu_ptr(lport->stats, get_cpu());
+		crc_err = (stats->InvalidCRCCount++);
+		put_cpu();
+		if (crc_err < 5)
 			printk(KERN_WARNING PFX "dropping frame with "
 			       "CRC error\n");
-		stats->InvalidCRCCount++;
 		kfree_skb(skb);
 		return;
 	}
author maintainer
#99 lore raw

PATCH 99/126 nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

In reply to Greg Kroah-Hartman

From: Dai Ngo <[email protected]>

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

Quoted 1 line

From RFC 7530 Section 16.34.5:

o The server has not recorded an unconfirmed { v, x, c, *, * } and has recorded a confirmed { v, x, c, *, s }. If the principals of the record and of SETCLIENTID_CONFIRM do not match, the server returns NFS4ERR_CLID_INUSE without removing any relevant leased client state, and without changing recorded callback and callback_ident values for client { x }.

The current code intends to do what the spec describes above but it forgot to set 'old' to NULL resulting to the confirmed client to be expired.

Fixes 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
---
 fs/nfsd/nfs4state.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/nfsd/nfs4state.c +3 -1
@@ -4112,8 +4112,10 @@ nfsd4_setclientid_confirm(struct svc_rqs
 			status = nfserr_clid_inuse;
 			if (client_has_state(old)
 					&& !same_creds(&unconf->cl_cred,
-							&old->cl_cred))
+							&old->cl_cred)) {
+				old = NULL;
 				goto out;
+			}
 			status = mark_client_expired_locked(old);
 			if (status) {
 				old = NULL;
author maintainer
#100 lore raw

PATCH 100/126 gve: fix the wrong AdminQ buffer queue index check

In reply to Greg Kroah-Hartman

From: Haiyue Wang <[email protected]>

commit 1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream.

The 'tail' and 'head' are 'unsigned int' type free-running count, when 'head' is overflow, the 'int i (= tail) < u32 head' will be false:

Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type to compare, it can handle the overflow correctly.

typedef uint32_t u32;

int main()

{
        u32 tail, head;
        int stail, shead;
        int i, loop;

        tail = 0xffffffff;
        head = 0x00000000;

        for (i = tail, loop = 0; i < head; i++) {
                unsigned int idx = i & 63;

                printf("+ loop %d: idx = %u\n", loop++, idx);
        }

        stail = tail;
        shead = head;
        for (i = stail, loop = 0; i < shead; i++) {
                unsigned int idx = i & 63;

                printf("- loop %d: idx = %u\n", loop++, idx);
        }

        return 0;
}
Fixes 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
---
 drivers/net/ethernet/google/gve/gve_adminq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/google/gve/gve_adminq.c +1 -1
@@ -301,7 +301,7 @@ static int gve_adminq_parse_err(struct g
  */
 static int gve_adminq_kick_and_wait(struct gve_priv *priv)
 {
-	u32 tail, head;
+	int tail, head;
 	int i;
 
 	tail = ioread32be(&priv->reg_bar0->adminq_event_counter);
author maintainer
#101 lore raw

PATCH 101/126 bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

commit b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream.

After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead.

After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user

Fixes 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by [email protected]
---
 kernel/bpf/ringbuf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/bpf/ringbuf.c +1 -1
@@ -104,7 +104,7 @@ static struct bpf_ringbuf *bpf_ringbuf_a
 	}
 
 	rb = vmap(pages, nr_meta_pages + 2 * nr_data_pages,
-		  VM_ALLOC | VM_USERMAP, PAGE_KERNEL);
+		  VM_MAP | VM_USERMAP, PAGE_KERNEL);
 	if (rb) {
 		kmemleak_not_leak(pages);
 		rb->pages = pages;
author maintainer
#102 lore raw

PATCH 102/126 selftests/exec: Remove pipe from TEST_GEN_FILES

In reply to Greg Kroah-Hartman

From: Muhammad Usama Anjum <[email protected]>

commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream.

pipe named FIFO special file is being created in execveat.c to perform some tests. Makefile doesn't need to do anything with the pipe. When it isn't found, Makefile generates the following build error:

make: *** No rule to make target '../tools/testing/selftests/exec/pipe', needed by 'all'. Stop.

pipe is created and removed during test run-time.

Amended change log to add pipe remove info:
Shuah Khan <[email protected]>

Fixes 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail")
---
 tools/testing/selftests/exec/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/exec/Makefile +1 -1
@@ -5,7 +5,7 @@ CFLAGS += -D_GNU_SOURCE
 
 TEST_PROGS := binfmt_script non-regular
 TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216
-TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe
+TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir
 # Makefile is a run-time dependency, since it's accessed by the execveat test
 TEST_FILES := Makefile
 
author maintainer
#103 lore raw

PATCH 103/126 selftests: futex: Use variable MAKE instead of make

In reply to Greg Kroah-Hartman

From: Muhammad Usama Anjum <[email protected]>

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.

Fixes a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
---
 tools/testing/selftests/futex/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/futex/Makefile +2 -2
@@ -11,7 +11,7 @@ all:
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 		if [ -e $$DIR/$(TEST_PROGS) ]; then \
 			rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \
 		fi \
@@ -32,6 +32,6 @@ override define CLEAN
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 	done
 endef
author maintainer
#104 lore raw

PATCH 104/126 tools/resolve_btfids: Do not print any commands when building silently

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit 7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream.

When building with 'make -s', there is some output from resolve_btfids:

$ make -sj"$(nproc)" oldconfig prepare
  MKDIR     .../tools/bpf/resolve_btfids/libbpf/
  MKDIR     .../tools/bpf/resolve_btfids//libsubcmd
  LINK     resolve_btfids

Silent mode means that no information should be emitted about what is currently being done. Use the $(silent) variable from Makefile.include to avoid defining the msg macro so that there is no information printed.

Fixes fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
---
 tools/bpf/resolve_btfids/Makefile |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
tools/bpf/resolve_btfids/Makefile +5 -1
@@ -9,7 +9,11 @@ ifeq ($(V),1)
   msg =
 else
   Q = @
-  msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  ifeq ($(silent),1)
+    msg =
+  else
+    msg = @printf '  %-8s %s%s\n' "$(1)" "$(notdir $(2))" "$(if $(3), $(3))";
+  endif
   MAKEFLAGS=--no-print-directory
 endif
 
author maintainer
#105 lore raw

PATCH 105/126 e1000e: Separate ADP board type from TGP

In reply to Greg Kroah-Hartman

From: Sasha Neftin <[email protected]>

commit 68defd528f94ed1cf11f49a75cc1875dccd781fa upstream.

We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms.

---
 drivers/net/ethernet/intel/e1000e/e1000.h   |    4 ++-
 drivers/net/ethernet/intel/e1000e/ich8lan.c |   20 ++++++++++++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  |   33 ++++++++++++++--------------
 3 files changed, 40 insertions(+), 17 deletions(-)
drivers/net/ethernet/intel/e1000e/e1000.h +3 -1
@@ -115,7 +115,8 @@ enum e1000_boards {
 	board_pch_lpt,
 	board_pch_spt,
 	board_pch_cnp,
-	board_pch_tgp
+	board_pch_tgp,
+	board_pch_adp
 };
 
 struct e1000_ps_page {
@@ -502,6 +503,7 @@ extern const struct e1000_info e1000_pch
 extern const struct e1000_info e1000_pch_spt_info;
 extern const struct e1000_info e1000_pch_cnp_info;
 extern const struct e1000_info e1000_pch_tgp_info;
+extern const struct e1000_info e1000_pch_adp_info;
 extern const struct e1000_info e1000_es2_info;
 
 void e1000e_ptp_init(struct e1000_adapter *adapter);
drivers/net/ethernet/intel/e1000e/ich8lan.c +20 -0
@@ -6021,3 +6021,23 @@ const struct e1000_info e1000_pch_tgp_in
 	.phy_ops		= &ich8_phy_ops,
 	.nvm_ops		= &spt_nvm_ops,
 };
+
+const struct e1000_info e1000_pch_adp_info = {
+	.mac			= e1000_pch_adp,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= 9022,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &spt_nvm_ops,
+};
drivers/net/ethernet/intel/e1000e/netdev.c +17 -16
@@ -52,6 +52,7 @@ static const struct e1000_info *e1000_in
 	[board_pch_spt]		= &e1000_pch_spt_info,
 	[board_pch_cnp]		= &e1000_pch_cnp_info,
 	[board_pch_tgp]		= &e1000_pch_tgp_info,
+	[board_pch_adp]		= &e1000_pch_adp_info,
 };
 
 struct e1000_reg_info {
@@ -7904,22 +7905,22 @@ static const struct pci_device_id e1000_
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_tgp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_tgp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM23), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V23), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_tgp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM23), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V23), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_adp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_adp },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };
author maintainer
#106 lore raw

PATCH 106/126 rtc: cmos: Evaluate century appropriate

In reply to Greg Kroah-Hartman

From: Riwen Lu <[email protected]>

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070, reading it returns 1970. Evaluate century starting from 19 to count the correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00
Fixes 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")
---
 drivers/rtc/rtc-mc146818-lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-mc146818-lib.c +1 -1
@@ -104,7 +104,7 @@ again:
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century > 20)
+	if (century > 19)
 		time->tm_year += (century - 19) * 100;
 
 	/*
author maintainer
#107 lore raw

PATCH 107/126 objtool: Fix truncated string warning

In reply to Greg Kroah-Hartman

From: Sergei Trofimovich <[email protected]>

[ Upstream commit 82880283d7fcd0a1d20964a56d6d1a5cc0df0713 ]

On GCC 12, the build fails due to a possible truncated string:

check.c: In function 'validate_call':
check.c:2865:58: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
2865 | snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
| ^~

In theory it's a valid bug:

    static char pvname[16];
    int idx;
    ...
    idx = (rel->addend / sizeof(void *));
    snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);

There are only 7 chars for %d while it could take up to 9, so the printed "pv_ops[%d]" string could get truncated.

In reality the bug should never happen, because pv_ops only has ~80 entries, so 7 chars for the integer is more than enough. Still, it's worth fixing. Bump the buffer size by 2 bytes to silence the warning.

[ jpoimboe: changed size to 19; massaged changelog ]

---
 tools/objtool/check.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/objtool/check.c +1 -1
index 21735829b860c..750ef1c446c8a 100644
@@ -2823,7 +2823,7 @@ static inline bool func_uaccess_safe(struct symbol *func)
 
 static inline const char *call_dest_name(struct instruction *insn)
 {
-	static char pvname[16];
+	static char pvname[19];
 	struct reloc *rel;
 	int idx;
 
Signature · 1 line
2.34.1
author maintainer
#108 lore raw

PATCH 108/126 kvm/arm64: rework guest entry logic

In reply to Greg Kroah-Hartman

From: Mark Rutland <[email protected]>

[ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]

In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmasked IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems.

Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods.

This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence:

	guest_timing_enter_irqoff();

	guest_state_enter_irqoff();
	< run the vcpu >
	guest_state_exit_irqoff();

	< take any pending IRQs >

	guest_timing_exit_irqoff();

Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_arm_enter_exit_vcpu() helper which is marked noinstr.

Fixes 1b3d546daf85ed2b ("arm/arm64: KVM: Properly account for guest CPU time")
Cc Alexandru Elisei <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc James Morse <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Suzuki K Poulose <[email protected]>
Cc Will Deacon <[email protected]>

Message-Id: <[email protected]>

---
 arch/arm64/kvm/arm.c | 51 ++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 18 deletions(-)
arch/arm64/kvm/arm.c +33 -18
index e4727dc771bf3..b2222d8eb0b55 100644
@@ -764,6 +764,24 @@ static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret)
 			xfer_to_guest_mode_work_pending();
 }
 
+/*
+ * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
+ * the vCPU is running.
+ *
+ * This must be noinstr as instrumentation may make use of RCU, and this is not
+ * safe during the EQS.
+ */
+static int noinstr kvm_arm_vcpu_enter_exit(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guest_state_enter_irqoff();
+	ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
+	guest_state_exit_irqoff();
+
+	return ret;
+}
+
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
@@ -854,9 +872,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * Enter the guest
 		 */
 		trace_kvm_entry(*vcpu_pc(vcpu));
-		guest_enter_irqoff();
+		guest_timing_enter_irqoff();
 
-		ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
+		ret = kvm_arm_vcpu_enter_exit(vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		vcpu->stat.exits++;
@@ -891,26 +909,23 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		kvm_arch_vcpu_ctxsync_fp(vcpu);
 
 		/*
-		 * We may have taken a host interrupt in HYP mode (ie
-		 * while executing the guest). This interrupt is still
-		 * pending, as we haven't serviced it yet!
+		 * We must ensure that any pending interrupts are taken before
+		 * we exit guest timing so that timer ticks are accounted as
+		 * guest time. Transiently unmask interrupts so that any
+		 * pending interrupts are taken.
 		 *
-		 * We're now back in SVC mode, with interrupts
-		 * disabled.  Enabling the interrupts now will have
-		 * the effect of taking the interrupt again, in SVC
-		 * mode this time.
+		 * Per ARM DDI 0487G.b section D1.13.4, an ISB (or other
+		 * context synchronization event) is necessary to ensure that
+		 * pending interrupts are taken.
 		 */
 		local_irq_enable();
+		isb();
+		local_irq_disable();
+
+		guest_timing_exit_irqoff();
+
+		local_irq_enable();
 
-		/*
-		 * We do local_irq_enable() before calling guest_exit() so
-		 * that if a timer interrupt hits while running the guest we
-		 * account that tick as being spent in the guest.  We enable
-		 * preemption after calling guest_exit() so that if we get
-		 * preempted we make sure ticks after that is not counted as
-		 * guest time.
-		 */
-		guest_exit();
 		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 
 		/* Exit types that need handling before we can be preempted */
Signature · 1 line
2.34.1
author maintainer
#109 lore raw

PATCH 109/126 perf: Copy perf_event_attr::sig_data on modification

In reply to Greg Kroah-Hartman

From: Marco Elver <[email protected]>

[ Upstream commit 3c25fc97f5590060464cabfa25710970ecddbc96 ]

The intent has always been that perf_event_attr::sig_data should also be modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is observable by user space if SIGTRAP on events is requested.

Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies relevant breakpoint-related attributes in hw_breakpoint_copy_attr(). This misses copying perf_event_attr::sig_data.

Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a helper to copy generic event-type-independent attributes on modification.

---
 kernel/events/core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
kernel/events/core.c +16 -0
index 6ed890480c4aa..04e6e2dae60e4 100644
@@ -3234,6 +3234,15 @@ static int perf_event_modify_breakpoint(struct perf_event *bp,
 	return err;
 }
 
+/*
+ * Copy event-type-independent attributes that may be modified.
+ */
+static void perf_event_modify_copy_attr(struct perf_event_attr *to,
+					const struct perf_event_attr *from)
+{
+	to->sig_data = from->sig_data;
+}
+
 static int perf_event_modify_attr(struct perf_event *event,
 				  struct perf_event_attr *attr)
 {
@@ -3256,10 +3265,17 @@ static int perf_event_modify_attr(struct perf_event *event,
 	WARN_ON_ONCE(event->ctx->parent_ctx);
 
 	mutex_lock(&event->child_mutex);
+	/*
+	 * Event-type-independent attributes must be copied before event-type
+	 * modification, which will validate that final attributes match the
+	 * source attributes after all relevant attributes have been copied.
+	 */
+	perf_event_modify_copy_attr(&event->attr, attr);
 	err = func(event, attr);
 	if (err)
 		goto out;
 	list_for_each_entry(child, &event->child_list, child_list) {
+		perf_event_modify_copy_attr(&child->attr, attr);
 		err = func(child, attr);
 		if (err)
 			goto out;
Signature · 1 line
2.34.1
author maintainer
#110 lore raw

PATCH 110/126 perf stat: Fix display of grouped aliased events

In reply to Greg Kroah-Hartman

From: Ian Rogers <[email protected]>

[ Upstream commit b2b1aa73ade982c175ac926a1fd34e76ad628b94 ]

An event may have a number of uncore aliases that when added to the evlist are consecutive.

If there are multiple uncore events in a group then parse_events__set_leader_for_uncore_aliase will reorder the evlist so that events on the same PMU are adjacent.

The collect_all_aliases function assumes that aliases are in blocks so that only the first counter is printed and all others are marked merged.

The reordering for groups breaks the assumption and so all counts are printed.

This change removes the assumption from collect_all_aliases that the events are in blocks and instead processes the entire evlist.

Before:

  ```
  $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1

   Performance counter stats for 'system wide':

  CPU0                  256,866      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 494,413      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      967      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,738      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,161      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,920      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,443      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  310,753      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,657      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,231      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,573      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  416,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 405,966      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,481      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,447      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  312,911      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 408,154      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,086      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,380      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  333,994      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,349      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,287      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,335      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  188,107      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 302,423      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      701      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,070      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  307,221      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 383,642      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,036      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,158      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  318,479      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 821,545      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,028      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,550      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  227,618      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 372,272      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      903      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  376,783      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 419,827      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,406      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,453      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  286,583      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 429,956      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      999      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,436      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  313,867      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 370,159      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,114      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 409,111      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,399      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,684      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,828      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 376,037      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,378      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,411      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  382,456      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 621,743      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,232      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,955      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,316      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 385,067      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,176      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,268      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  373,588      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 386,163      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,394      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,464      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  381,206      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 546,891      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,266      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,712      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  221,176      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 392,069      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      831      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,456      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  355,401      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 705,595      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,235      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,216      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  371,436      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 428,103      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,306      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,442      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  384,352      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 504,200      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,468      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,860      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  228,856      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 287,976      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      832      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,060      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  215,121      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 334,162      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      681      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,026      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,179      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 436,083      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,084      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,525      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  262,296      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 416,573      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      986      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,533      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  285,852      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 359,842      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,073      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,326      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  303,379      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 367,222      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,008      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,156      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  273,487      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 425,449      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                      932      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,367      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  297,596      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 414,793      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,140      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,601      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  342,365      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 360,422      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,291      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,342      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  327,196      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 580,858      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,122      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,014      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  296,564      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 452,817      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,087      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,694      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  375,002      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 389,393      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,478      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   1,540      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0                  365,213      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36                 594,685      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                    1,401      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                   2,222      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,749,060 ns   duration_time

         1.000749060 seconds time elapsed
  ```

After:

  ```
   Performance counter stats for 'system wide':

  CPU0               20,547,434      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU36              45,202,862      UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
  CPU0                   82,001      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU36                 159,688      UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
  CPU0            1,000,464,828 ns   duration_time

         1.000464828 seconds time elapsed
  ```
Fixes 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Cc Alexander Shishkin <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc Asaf Yaffe <[email protected]>
Cc Caleb Biggers <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Clark <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc John Garry <[email protected]>
Cc Kan Liang <[email protected]>
Cc Kshipra Bopardikar <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Perry Taylor <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Vineet Singh <[email protected]>
Cc Zhengjun Xing <[email protected]>
---
 tools/perf/util/stat-display.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
tools/perf/util/stat-display.c +10 -9
index 588601000f3f9..db00ca6a67deb 100644
@@ -584,15 +584,16 @@ static void collect_all_aliases(struct perf_stat_config *config, struct evsel *c
 
 	alias = list_prepare_entry(counter, &(evlist->core.entries), core.node);
 	list_for_each_entry_continue (alias, &evlist->core.entries, core.node) {
-		if (strcmp(evsel__name(alias), evsel__name(counter)) ||
-		    alias->scale != counter->scale ||
-		    alias->cgrp != counter->cgrp ||
-		    strcmp(alias->unit, counter->unit) ||
-		    evsel__is_clock(alias) != evsel__is_clock(counter) ||
-		    !strcmp(alias->pmu_name, counter->pmu_name))
-			break;
-		alias->merged_stat = true;
-		cb(config, alias, data, false);
+		/* Merge events with the same name, etc. but on different PMUs. */
+		if (!strcmp(evsel__name(alias), evsel__name(counter)) &&
+			alias->scale == counter->scale &&
+			alias->cgrp == counter->cgrp &&
+			!strcmp(alias->unit, counter->unit) &&
+			evsel__is_clock(alias) == evsel__is_clock(counter) &&
+			strcmp(alias->pmu_name, counter->pmu_name)) {
+			alias->merged_stat = true;
+			cb(config, alias, data, false);
+		}
 	}
 }
 
Signature · 1 line
2.34.1
author maintainer
#111 lore raw

PATCH 111/126 perf/x86/intel/pt: Fix crash with stop filters in single-range mode

In reply to Greg Kroah-Hartman

From: Tristan Hume <[email protected]>

commit 1d9093457b243061a9bba23543c38726e864a643 upstream.

Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash.

Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured.

The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter.

Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch.

Fixes 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode")
---
 arch/x86/events/intel/pt.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/x86/events/intel/pt.c +3 -2
@@ -897,8 +897,9 @@ static void pt_handle_status(struct pt *
 		 * means we are already losing data; need to let the decoder
 		 * know.
 		 */
-		if (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
-		    buf->output_off == pt_buffer_region_size(buf)) {
+		if (!buf->single &&
+		    (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
+		     buf->output_off == pt_buffer_region_size(buf))) {
 			perf_aux_output_flag(&pt->handle,
 			                     PERF_AUX_FLAG_TRUNCATED);
 			advance++;
author maintainer
#112 lore raw

PATCH 112/126 x86/perf: Default set FREEZE_ON_SMI for all

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream.

Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3.

Since this is a privilege violation, default disable SMM visibility where possible.

Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file.

[0] https://rr-project.org/

[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5.

---
 arch/x86/events/intel/core.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/x86/events/intel/core.c +13 -0
@@ -4709,6 +4709,19 @@ static __initconst const struct x86_pmu
 	.lbr_read		= intel_pmu_lbr_read_64,
 	.lbr_save		= intel_pmu_lbr_save,
 	.lbr_restore		= intel_pmu_lbr_restore,
+
+	/*
+	 * SMM has access to all 4 rings and while traditionally SMM code only
+	 * ran in CPL0, 2021-era firmware is starting to make use of CPL3 in SMM.
+	 *
+	 * Since the EVENTSEL.{USR,OS} CPL filtering makes no distinction
+	 * between SMM or not, this results in what should be pure userspace
+	 * counters including SMM data.
+	 *
+	 * This is a clear privilege issue, therefore globally disable
+	 * counting SMM by default.
+	 */
+	.attr_freeze_on_smi	= 1,
 };
 
 static __init void intel_clovertown_quirk(void)
author maintainer
#113 lore raw

PATCH 113/126 EDAC/altera: Fix deferred probing

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards.

[ bp: Massage commit message. ]

---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/edac/altera_edac.c +1 -1
@@ -350,7 +350,7 @@ static int altr_sdram_probe(struct platf
 	if (irq < 0) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No irq %d in DT\n", irq);
-		return -ENODEV;
+		return irq;
 	}
 
 	/* Arria10 has a 2nd IRQ */
author maintainer
#114 lore raw

PATCH 114/126 EDAC/xgene: Fix deferred probing

In reply to Greg Kroah-Hartman

From: Sergey Shtylyov <[email protected]>

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional() to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards.

[ bp: Massage commit message. ]

---
 drivers/edac/xgene_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/edac/xgene_edac.c +1 -1
@@ -1919,7 +1919,7 @@ static int xgene_edac_probe(struct platf
 			irq = platform_get_irq_optional(pdev, i);
 			if (irq < 0) {
 				dev_err(&pdev->dev, "No IRQ resource\n");
-				rc = -EINVAL;
+				rc = irq;
 				goto out_err;
 			}
 			rc = devm_request_irq(&pdev->dev, irq,
author maintainer
#115 lore raw

PATCH 115/126 ext4: prevent used blocks from being allocated during fast commit replay

In reply to Greg Kroah-Hartman

From: Xin Yin <[email protected]>

commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream.

During fast commit replay procedure, we clear inode blocks bitmap in ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate blocks still in use.

Make ext4_fc_record_regions() also record physical disk regions used by inodes during replay procedure. Then ext4_mb_new_blocks_simple() can excludes these blocks in use.

---
 fs/ext4/ext4.h        |    3 +++
 fs/ext4/extents.c     |    4 ++++
 fs/ext4/fast_commit.c |   20 +++++++++++++++-----
 3 files changed, 22 insertions(+), 5 deletions(-)
fs/ext4/ext4.h +3 -0
@@ -2936,6 +2936,9 @@ void ext4_fc_replay_cleanup(struct super
 int ext4_fc_commit(journal_t *journal, tid_t commit_tid);
 int __init ext4_fc_init_dentry_cache(void);
 void ext4_fc_destroy_dentry_cache(void);
+int ext4_fc_record_regions(struct super_block *sb, int ino,
+			   ext4_lblk_t lblk, ext4_fsblk_t pblk,
+			   int len, int replay);
 
 /* mballoc.c */
 extern const struct seq_operations ext4_mb_seq_groups_ops;
fs/ext4/extents.c +4 -0
@@ -6101,11 +6101,15 @@ int ext4_ext_clear_bb(struct inode *inod
 
 					ext4_mb_mark_bb(inode->i_sb,
 							path[j].p_block, 1, 0);
+					ext4_fc_record_regions(inode->i_sb, inode->i_ino,
+							0, path[j].p_block, 1, 1);
 				}
 				ext4_ext_drop_refs(path);
 				kfree(path);
 			}
 			ext4_mb_mark_bb(inode->i_sb, map.m_pblk, map.m_len, 0);
+			ext4_fc_record_regions(inode->i_sb, inode->i_ino,
+					map.m_lblk, map.m_pblk, map.m_len, 1);
 		}
 		cur = cur + map.m_len;
 	}
fs/ext4/fast_commit.c +15 -5
@@ -1606,16 +1606,23 @@ out:
 }
 
 /*
- * Record physical disk regions which are in use as per fast commit area. Our
- * simple replay phase allocator excludes these regions from allocation.
+ * Record physical disk regions which are in use as per fast commit area,
+ * and used by inodes during replay phase. Our simple replay phase
+ * allocator excludes these regions from allocation.
  */
-static int ext4_fc_record_regions(struct super_block *sb, int ino,
-		ext4_lblk_t lblk, ext4_fsblk_t pblk, int len)
+int ext4_fc_record_regions(struct super_block *sb, int ino,
+		ext4_lblk_t lblk, ext4_fsblk_t pblk, int len, int replay)
 {
 	struct ext4_fc_replay_state *state;
 	struct ext4_fc_alloc_region *region;
 
 	state = &EXT4_SB(sb)->s_fc_replay_state;
+	/*
+	 * during replay phase, the fc_regions_valid may not same as
+	 * fc_regions_used, update it when do new additions.
+	 */
+	if (replay && state->fc_regions_used != state->fc_regions_valid)
+		state->fc_regions_used = state->fc_regions_valid;
 	if (state->fc_regions_used == state->fc_regions_size) {
 		state->fc_regions_size +=
 			EXT4_FC_REPLAY_REALLOC_INCREMENT;
@@ -1633,6 +1640,9 @@ static int ext4_fc_record_regions(struct
 	region->pblk = pblk;
 	region->len = len;
 
+	if (replay)
+		state->fc_regions_valid++;
+
 	return 0;
 }
 
@@ -1980,7 +1990,7 @@ static int ext4_fc_replay_scan(journal_t
 			ret = ext4_fc_record_regions(sb,
 				le32_to_cpu(ext.fc_ino),
 				le32_to_cpu(ex->ee_block), ext4_ext_pblock(ex),
-				ext4_ext_get_actual_len(ex));
+				ext4_ext_get_actual_len(ex), 0);
 			if (ret < 0)
 				break;
 			ret = JBD2_FC_REPLAY_CONTINUE;
author maintainer
#116 lore raw

PATCH 116/126 ext4: modify the logic of ext4_mb_new_blocks_simple

In reply to Greg Kroah-Hartman

From: Xin Yin <[email protected]>

commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream.

For now in ext4_mb_new_blocks_simple, if we found a block which should be excluded then will switch to next group, this may probably cause 'group' run out of range.

Change to check next block in the same group when get a block should be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP and add error checking.

---
 fs/ext4/mballoc.c |   26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)
fs/ext4/mballoc.c +17 -9
@@ -5753,7 +5753,8 @@ static ext4_fsblk_t ext4_mb_new_blocks_s
 	struct super_block *sb = ar->inode->i_sb;
 	ext4_group_t group;
 	ext4_grpblk_t blkoff;
-	int i = sb->s_blocksize;
+	ext4_grpblk_t max = EXT4_CLUSTERS_PER_GROUP(sb);
+	ext4_grpblk_t i = 0;
 	ext4_fsblk_t goal, block;
 	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 
@@ -5775,19 +5776,26 @@ static ext4_fsblk_t ext4_mb_new_blocks_s
 		ext4_get_group_no_and_offset(sb,
 			max(ext4_group_first_block_no(sb, group), goal),
 			NULL, &blkoff);
-		i = mb_find_next_zero_bit(bitmap_bh->b_data, sb->s_blocksize,
+		while (1) {
+			i = mb_find_next_zero_bit(bitmap_bh->b_data, max,
 						blkoff);
+			if (i >= max)
+				break;
+			if (ext4_fc_replay_check_excluded(sb,
+				ext4_group_first_block_no(sb, group) + i)) {
+				blkoff = i + 1;
+			} else
+				break;
+		}
 		brelse(bitmap_bh);
-		if (i >= sb->s_blocksize)
-			continue;
-		if (ext4_fc_replay_check_excluded(sb,
-			ext4_group_first_block_no(sb, group) + i))
-			continue;
-		break;
+		if (i < max)
+			break;
 	}
 
-	if (group >= ext4_get_groups_count(sb) && i >= sb->s_blocksize)
+	if (group >= ext4_get_groups_count(sb) || i >= max) {
+		*errp = -ENOSPC;
 		return 0;
+	}
 
 	block = ext4_group_first_block_no(sb, group) + i;
 	ext4_mb_mark_bb(sb, block, 1, 1);
author maintainer
#117 lore raw

PATCH 117/126 ext4: fix error handling in ext4_restore_inline_data()

In reply to Greg Kroah-Hartman

From: Ritesh Harjani <[email protected]>

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed.

<log snip>

[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
213 void *buffer, loff_t pos, unsigned int len)
214 {
<...>
223 BUG_ON(!EXT4_I(inode)->i_inline_off);
224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)
---
 fs/ext4/inline.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
fs/ext4/inline.c +9 -1
@@ -1133,7 +1133,15 @@ static void ext4_restore_inline_data(han
 				     struct ext4_iloc *iloc,
 				     void *buf, int inline_size)
 {
-	ext4_create_inline_data(handle, inode, inline_size);
+	int ret;
+
+	ret = ext4_create_inline_data(handle, inode, inline_size);
+	if (ret) {
+		ext4_msg(inode->i_sb, KERN_EMERG,
+			"error restoring inline_data for inode -- potential data loss! (inode %lu, error %d)",
+			inode->i_ino, ret);
+		return;
+	}
 	ext4_write_inline_data(inode, iloc, buf, 0, inline_size);
 	ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 }
author maintainer
#118 lore raw

PATCH 118/126 ext4: fix error handling in ext4_fc_record_modified_inode()

In reply to Greg Kroah-Hartman

From: Ritesh Harjani <[email protected]>

commit cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream.

Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that.

Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file.

---
 fs/ext4/fast_commit.c |   64 ++++++++++++++++++++++----------------------------
 1 file changed, 29 insertions(+), 35 deletions(-)
fs/ext4/fast_commit.c +29 -35
@@ -1435,14 +1435,15 @@ static int ext4_fc_record_modified_inode
 		if (state->fc_modified_inodes[i] == ino)
 			return 0;
 	if (state->fc_modified_inodes_used == state->fc_modified_inodes_size) {
-		state->fc_modified_inodes_size +=
-			EXT4_FC_REPLAY_REALLOC_INCREMENT;
 		state->fc_modified_inodes = krealloc(
-					state->fc_modified_inodes, sizeof(int) *
-					state->fc_modified_inodes_size,
-					GFP_KERNEL);
+				state->fc_modified_inodes,
+				sizeof(int) * (state->fc_modified_inodes_size +
+				EXT4_FC_REPLAY_REALLOC_INCREMENT),
+				GFP_KERNEL);
 		if (!state->fc_modified_inodes)
 			return -ENOMEM;
+		state->fc_modified_inodes_size +=
+			EXT4_FC_REPLAY_REALLOC_INCREMENT;
 	}
 	state->fc_modified_inodes[state->fc_modified_inodes_used++] = ino;
 	return 0;
@@ -1474,7 +1475,9 @@ static int ext4_fc_replay_inode(struct s
 	}
 	inode = NULL;
 
-	ext4_fc_record_modified_inode(sb, ino);
+	ret = ext4_fc_record_modified_inode(sb, ino);
+	if (ret)
+		goto out;
 
 	raw_fc_inode = (struct ext4_inode *)
 		(val + offsetof(struct ext4_fc_inode, fc_raw_inode));
@@ -1674,6 +1677,8 @@ static int ext4_fc_replay_add_range(stru
 	}
 
 	ret = ext4_fc_record_modified_inode(sb, inode->i_ino);
+	if (ret)
+		goto out;
 
 	start = le32_to_cpu(ex->ee_block);
 	start_pblk = ext4_ext_pblock(ex);
@@ -1691,18 +1696,14 @@ static int ext4_fc_replay_add_range(stru
 		map.m_pblk = 0;
 		ret = ext4_map_blocks(NULL, inode, &map, 0);
 
-		if (ret < 0) {
-			iput(inode);
-			return 0;
-		}
+		if (ret < 0)
+			goto out;
 
 		if (ret == 0) {
 			/* Range is not mapped */
 			path = ext4_find_extent(inode, cur, NULL, 0);
-			if (IS_ERR(path)) {
-				iput(inode);
-				return 0;
-			}
+			if (IS_ERR(path))
+				goto out;
 			memset(&newex, 0, sizeof(newex));
 			newex.ee_block = cpu_to_le32(cur);
 			ext4_ext_store_pblock(
@@ -1716,10 +1717,8 @@ static int ext4_fc_replay_add_range(stru
 			up_write((&EXT4_I(inode)->i_data_sem));
 			ext4_ext_drop_refs(path);
 			kfree(path);
-			if (ret) {
-				iput(inode);
-				return 0;
-			}
+			if (ret)
+				goto out;
 			goto next;
 		}
 
@@ -1732,10 +1731,8 @@ static int ext4_fc_replay_add_range(stru
 			ret = ext4_ext_replay_update_ex(inode, cur, map.m_len,
 					ext4_ext_is_unwritten(ex),
 					start_pblk + cur - start);
-			if (ret) {
-				iput(inode);
-				return 0;
-			}
+			if (ret)
+				goto out;
 			/*
 			 * Mark the old blocks as free since they aren't used
 			 * anymore. We maintain an array of all the modified
@@ -1755,10 +1752,8 @@ static int ext4_fc_replay_add_range(stru
 			ext4_ext_is_unwritten(ex), map.m_pblk);
 		ret = ext4_ext_replay_update_ex(inode, cur, map.m_len,
 					ext4_ext_is_unwritten(ex), map.m_pblk);
-		if (ret) {
-			iput(inode);
-			return 0;
-		}
+		if (ret)
+			goto out;
 		/*
 		 * We may have split the extent tree while toggling the state.
 		 * Try to shrink the extent tree now.
@@ -1770,6 +1765,7 @@ next:
 	}
 	ext4_ext_replay_shrink_inode(inode, i_size_read(inode) >>
 					sb->s_blocksize_bits);
+out:
 	iput(inode);
 	return 0;
 }
@@ -1799,6 +1795,8 @@ ext4_fc_replay_del_range(struct super_bl
 	}
 
 	ret = ext4_fc_record_modified_inode(sb, inode->i_ino);
+	if (ret)
+		goto out;
 
 	jbd_debug(1, "DEL_RANGE, inode %ld, lblk %d, len %d\n",
 			inode->i_ino, le32_to_cpu(lrange.fc_lblk),
@@ -1808,10 +1806,8 @@ ext4_fc_replay_del_range(struct super_bl
 		map.m_len = remaining;
 
 		ret = ext4_map_blocks(NULL, inode, &map, 0);
-		if (ret < 0) {
-			iput(inode);
-			return 0;
-		}
+		if (ret < 0)
+			goto out;
 		if (ret > 0) {
 			remaining -= ret;
 			cur += ret;
@@ -1826,15 +1822,13 @@ ext4_fc_replay_del_range(struct super_bl
 	ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
 				lrange.fc_lblk + lrange.fc_len - 1);
 	up_write(&EXT4_I(inode)->i_data_sem);
-	if (ret) {
-		iput(inode);
-		return 0;
-	}
+	if (ret)
+		goto out;
 	ext4_ext_replay_shrink_inode(inode,
 		i_size_read(inode) >> sb->s_blocksize_bits);
 	ext4_mark_inode_dirty(NULL, inode);
+out:
 	iput(inode);
-
 	return 0;
 }
 
author maintainer
#119 lore raw

PATCH 119/126 ext4: fix incorrect type issue during replay_del_range

In reply to Greg Kroah-Hartman

From: Xin Yin <[email protected]>

commit 8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream.

should not use fast commit log data directly, add le32_to_cpu().

Fixes 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
---
 fs/ext4/fast_commit.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
fs/ext4/fast_commit.c +3 -2
@@ -1819,8 +1819,9 @@ ext4_fc_replay_del_range(struct super_bl
 	}
 
 	down_write(&EXT4_I(inode)->i_data_sem);
-	ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
-				lrange.fc_lblk + lrange.fc_len - 1);
+	ret = ext4_ext_remove_space(inode, le32_to_cpu(lrange.fc_lblk),
+				le32_to_cpu(lrange.fc_lblk) +
+				le32_to_cpu(lrange.fc_len) - 1);
 	up_write(&EXT4_I(inode)->i_data_sem);
 	if (ret)
 		goto out;
author maintainer
#120 lore raw

PATCH 120/126 net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY

In reply to Greg Kroah-Hartman

From: Arınç ÜNAL <[email protected]>

commit 4223f86512877b04c932e7203648b37eec931731 upstream.

Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs.

A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there.

---
 drivers/net/dsa/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/net/dsa/Kconfig +1 -0
@@ -36,6 +36,7 @@ config NET_DSA_LANTIQ_GSWIP
 config NET_DSA_MT7530
 	tristate "MediaTek MT753x and MT7621 Ethernet switch support"
 	select NET_DSA_TAG_MTK
+	select MEDIATEK_GE_PHY
 	help
 	  This enables support for the MediaTek MT7530, MT7531, and MT7621
 	  Ethernet switch chips.
author maintainer
#121 lore raw

PATCH 121/126 cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

In reply to Greg Kroah-Hartman

From: Waiman Long <[email protected]>

commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream.

It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment.

Fixes 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
---
 kernel/cgroup/cpuset.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
kernel/cgroup/cpuset.c +10 -0
@@ -1530,10 +1530,15 @@ static void update_sibling_cpumasks(stru
 	struct cpuset *sibling;
 	struct cgroup_subsys_state *pos_css;
 
+	percpu_rwsem_assert_held(&cpuset_rwsem);
+
 	/*
 	 * Check all its siblings and call update_cpumasks_hier()
 	 * if their use_parent_ecpus flag is set in order for them
 	 * to use the right effective_cpus value.
+	 *
+	 * The update_cpumasks_hier() function may sleep. So we have to
+	 * release the RCU read lock before calling it.
 	 */
 	rcu_read_lock();
 	cpuset_for_each_child(sibling, pos_css, parent) {
@@ -1541,8 +1546,13 @@ static void update_sibling_cpumasks(stru
 			continue;
 		if (!sibling->use_parent_ecpus)
 			continue;
+		if (!css_tryget_online(&sibling->css))
+			continue;
 
+		rcu_read_unlock();
 		update_cpumasks_hier(sibling, tmp);
+		rcu_read_lock();
+		css_put(&sibling->css);
 	}
 	rcu_read_unlock();
 }
author maintainer
#122 lore raw

PATCH 122/126 tools include UAPI: Sync sound/asound.h copy with the kernel sources

In reply to Greg Kroah-Hartman

From: Arnaldo Carvalho de Melo <[email protected]>

commit 4f2492731ada9d702ffdfaa6ec1ff64820a1664c upstream.

Picking the changes from:

06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")

Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls.

To silence this perf tools build warning:

Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

---
 tools/include/uapi/sound/asound.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/include/uapi/sound/asound.h +3 -1
@@ -56,8 +56,10 @@
  *                                                                          *
  ****************************************************************************/
 
+#define AES_IEC958_STATUS_SIZE		24
+
 struct snd_aes_iec958 {
-	unsigned char status[24];	/* AES/IEC958 channel status bits */
+	unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */
 	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
 	unsigned char pad;		/* nothing */
 	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
author maintainer
#123 lore raw

PATCH 123/126 gpio: idt3243x: Fix an ignored error return from platform_get_irq()

In reply to Greg Kroah-Hartman

From: Yang Li <[email protected]>

commit 7c1cf55577782725ea2bc24687767c8fe8e57486 upstream.

The return from the call to platform_get_irq() is int, it can be a negative error code, however this is being assigned to an unsigned int variable 'parent_irq', so making 'parent_irq' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression compared with zero: parent_irq < 0

Fixes 30fee1d7462a ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe")
---
 drivers/gpio/gpio-idt3243x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpio/gpio-idt3243x.c +1 -1
@@ -132,7 +132,7 @@ static int idt_gpio_probe(struct platfor
 	struct device *dev = &pdev->dev;
 	struct gpio_irq_chip *girq;
 	struct idt_gpio_ctrl *ctrl;
-	unsigned int parent_irq;
+	int parent_irq;
 	int ngpios;
 	int ret;
 
author maintainer
#124 lore raw

PATCH 124/126 gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()

In reply to Greg Kroah-Hartman

From: Yang Li <[email protected]>

commit 9f51ce0b9e73f83bab2442b36d5e247a81bd3401 upstream.

The return from the call to platform_get_irq() is int, it can be a negative error code, however this is being assigned to an unsigned int variable 'irqn', so making 'irqn' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression compared with zero: mpc8xxx_gc -> irqn < 0

Fixes 0b39536cc699 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe")
---
 drivers/gpio/gpio-mpc8xxx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpio/gpio-mpc8xxx.c +1 -1
@@ -47,7 +47,7 @@ struct mpc8xxx_gpio_chip {
 				unsigned offset, int value);
 
 	struct irq_domain *irq;
-	unsigned int irqn;
+	int irqn;
 };
 
 /*
author maintainer
#125 lore raw

PATCH 125/126 selftests: nft_concat_range: add test for reload with no element add/del

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream.

Add a specific test for the reload issue fixed with
commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").

Add to set, then flush set content + restore without other add/remove in the transaction.

On kernels before the fix, this test case fails:
net,mac with reload [FAIL]

---
 tools/testing/selftests/netfilter/nft_concat_range.sh |   72 +++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)
tools/testing/selftests/netfilter/nft_concat_range.sh +71 -1
@@ -27,7 +27,7 @@ TYPES="net_port port_net net6_port port_
        net6_port_net6_port net_port_mac_proto_net"
 
 # Reported bugs, also described by TYPE_ variables below
-BUGS="flush_remove_add"
+BUGS="flush_remove_add reload"
 
 # List of possible paths to pktgen script from kernel tree for performance tests
 PKTGEN_SCRIPT_PATHS="
@@ -354,6 +354,23 @@ TYPE_flush_remove_add="
 display		Add two elements, flush, re-add
 "
 
+TYPE_reload="
+display		net,mac with reload
+type_spec	ipv4_addr . ether_addr
+chain_spec	ip daddr . ether saddr
+dst		addr4
+src		mac
+start		1
+count		1
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	0
+"
+
 # Set template for all tests, types and rules are filled in depending on test
 set_template='
 flush ruleset
@@ -1473,6 +1490,59 @@ test_bug_flush_remove_add() {
 	nft flush ruleset
 }
 
+# - add ranged element, check that packets match it
+# - reload the set, check packets still match
+test_bug_reload() {
+	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	rstart=${start}
+
+	range_size=1
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	# check kernel does allocate pcpu sctrach map
+	# for reload with no elemet add/delete
+	( echo flush set inet filter test ;
+	  nft list set inet filter test ) | nft -f -
+
+	start=${rstart}
+	range_size=1
+
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_match "${j}" $((j + src_delta)) || return 1
+		done
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	nft flush ruleset
+}
+
 test_reported_issues() {
 	eval test_bug_"${subtest}"
 }
author maintainer
#126 lore raw

PATCH 126/126 selftests: netfilter: check stateless nat udp checksum fixup

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa upstream.

Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer.

On kernels without
commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with:

cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)

On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx

---
 tools/testing/selftests/netfilter/nft_nat.sh |  152 +++++++++++++++++++++++++++
 1 file changed, 152 insertions(+)
tools/testing/selftests/netfilter/nft_nat.sh +152 -0
@@ -898,6 +898,144 @@ EOF
 	ip netns exec "$ns0" nft delete table $family nat
 }
 
+test_stateless_nat_ip()
+{
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules"
+		return 1
+	fi
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table ip stateless {
+	map xlate_in {
+		typeof meta iifname . ip saddr . ip daddr : ip daddr
+		elements = {
+			"veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2,
+		}
+	}
+	map xlate_out {
+		typeof meta iifname . ip saddr . ip daddr : ip daddr
+		elements = {
+			"veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99
+		}
+	}
+
+	chain prerouting {
+		type filter hook prerouting priority -400; policy accept;
+		ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in
+		ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add ip statless rules"
+		return $ksft_skip
+	fi
+
+	reset_counters
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from .2.2, due to stateless rewrite.
+	expect="packets 1 bytes 84"
+	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns1" ns0insl "$expect" "test_stateless 1"
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+	socat -h > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run stateless nat frag test without socat tool"
+		if [ $lret -eq 0 ]; then
+			return $ksft_skip
+		fi
+
+		ip netns exec "$ns0" nft delete table ip stateless
+		return $lret
+	fi
+
+	local tmpfile=$(mktemp)
+	dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null
+
+	local outfile=$(mktemp)
+	ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null &
+	sc_r=$!
+
+	sleep 1
+	# re-do with large ping -> ip fragmentation
+	ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2
+		lret=1
+	fi
+
+	wait
+
+	cmp "$tmpfile" "$outfile"
+	if [ $? -ne 0 ]; then
+		ls -l "$tmpfile" "$outfile"
+		echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2
+		lret=1
+	fi
+
+	rm -f "$tmpfile" "$outfile"
+
+	# ns1 should have seen packets from 2.2, due to stateless rewrite.
+	expect="packets 3 bytes 4164"
+	cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns1" ns0insl "$expect" "test_stateless 5"
+		lret=1
+	fi
+
+	ip netns exec "$ns0" nft delete table ip stateless
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete table ip stateless" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP statless for $ns2"
+
+	return $lret
+}
+
 # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
 for i in 0 1 2; do
 ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
@@ -964,6 +1102,19 @@ table inet filter {
 EOF
 done
 
+# special case for stateless nat check, counter needs to
+# be done before (input) ip defragmentation
+ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF
+table inet filter {
+	counter ns0insl {}
+
+	chain pre {
+		type filter hook prerouting priority -400; policy accept;
+		ip saddr 10.0.2.2 counter name "ns0insl"
+	}
+}
+EOF
+
 sleep 3
 # test basic connectivity
 for i in 1 2; do
@@ -1018,6 +1169,7 @@ $test_inet_nat && test_redirect inet
 $test_inet_nat && test_redirect6 inet
 
 test_port_shadowing
+test_stateless_nat_ip
 
 if [ $ret -ne 0 ];then
 	echo -n "FAIL: "
#127 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.16.8 release. There are 126 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

Linux stable-rc 5.16 arm64 builds failed due to below errors.

kvm/arm64: rework guest entry logic
[ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]

arch/arm64/kvm/arm.c: In function 'kvm_arm_vcpu_enter_exit':
arch/arm64/kvm/arm.c:778:9: error: implicit declaration of function 'guest_state_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]

  778 |         guest_state_enter_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~~
      |         guest_enter_irqoff
arch/arm64/kvm/arm.c:780:9: error: implicit declaration of function
'guest_state_exit_irqoff'; did you mean 'guest_exit_irqoff'?
[-Werror=implicit-function-declaration]
  780 |         guest_state_exit_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~
      |         guest_exit_irqoff

arch/arm64/kvm/arm.c: In function 'kvm_arch_vcpu_ioctl_run':
arch/arm64/kvm/arm.c:875:17: error: implicit declaration of function 'guest_timing_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]

  875 |                 guest_timing_enter_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_enter_irqoff
arch/arm64/kvm/arm.c:925:17: error: implicit declaration of function
'guest_timing_exit_irqoff'; did you mean 'guest_exit_irqoff'?
[-Werror=implicit-function-declaration]
  925 |                 guest_timing_exit_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_exit_irqoff

cc1: some warnings being treated as errors

build link:
-----------
https://builds.tuxbuild.com/24mSvZ8HXKXM8ToJvie1FaTpCz0/

--
Linaro LKFT
https://lkft.linaro.org

#128 lore raw
Quoted 57 lines · Naresh Kamboju
Quoted 16 lines

This is the start of the stable review cycle for the 5.16.8 release. There are 126 patches in this series, all will be posted as a response to this one.  If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.8-rc1.gz
or in the git tree and branch at:
         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-5.16.y
and the diffstat can be found below.

Quoted 3 lines

thanks,

greg k-h

Linux stable-rc 5.16 arm64 builds failed due to below errors.

  kvm/arm64: rework guest entry logic
  [ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]

arch/arm64/kvm/arm.c: In function 'kvm_arm_vcpu_enter_exit':
arch/arm64/kvm/arm.c:778:9: error: implicit declaration of function 'guest_state_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]
  778 |         guest_state_enter_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~~
      |         guest_enter_irqoff arch/arm64/kvm/arm.c:780:9: error: implicit declaration of function 'guest_state_exit_irqoff'; did you mean 'guest_exit_irqoff'? [-Werror=implicit-function-declaration]
  780 |         guest_state_exit_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~
      |         guest_exit_irqoff
arch/arm64/kvm/arm.c: In function 'kvm_arch_vcpu_ioctl_run':
arch/arm64/kvm/arm.c:875:17: error: implicit declaration of function 'guest_timing_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]
  875 |                 guest_timing_enter_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_enter_irqoff arch/arm64/kvm/arm.c:925:17: error: implicit declaration of function 'guest_timing_exit_irqoff'; did you mean 'guest_exit_irqoff'? [-Werror=implicit-function-declaration]
  925 |                 guest_timing_exit_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_exit_irqoff
cc1: some warnings being treated as errors

Quoted 2 lines

build link:
-----------

I think this patch is missing:
https://lore.kernel.org/lkml/[email protected]/T/#m49f8ab674c269f14f57dae33f90af30617bc735f

Signature · 1 line
Nicolás Sáenz
author maintainer
#129 lore raw
Quoted 58 lines · Nicolas Saenz Julienne
Quoted 57 lines · Naresh Kamboju
Quoted 16 lines

This is the start of the stable review cycle for the 5.16.8 release. There are 126 patches in this series, all will be posted as a response to this one.  If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.8-rc1.gz
or in the git tree and branch at:
         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-5.16.y
and the diffstat can be found below.

Quoted 3 lines

thanks,

greg k-h

Linux stable-rc 5.16 arm64 builds failed due to below errors.

  kvm/arm64: rework guest entry logic
  [ Upstream commit 8cfe148a7136bc60452a5c6b7ac2d9d15c36909b ]

arch/arm64/kvm/arm.c: In function 'kvm_arm_vcpu_enter_exit':
arch/arm64/kvm/arm.c:778:9: error: implicit declaration of function 'guest_state_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]
  778 |         guest_state_enter_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~~
      |         guest_enter_irqoff arch/arm64/kvm/arm.c:780:9: error: implicit declaration of function 'guest_state_exit_irqoff'; did you mean 'guest_exit_irqoff'? [-Werror=implicit-function-declaration]
  780 |         guest_state_exit_irqoff();
      |         ^~~~~~~~~~~~~~~~~~~~~~~
      |         guest_exit_irqoff
arch/arm64/kvm/arm.c: In function 'kvm_arch_vcpu_ioctl_run':
arch/arm64/kvm/arm.c:875:17: error: implicit declaration of function 'guest_timing_enter_irqoff'; did you mean 'guest_enter_irqoff'? [-Werror=implicit-function-declaration]
  875 |                 guest_timing_enter_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_enter_irqoff arch/arm64/kvm/arm.c:925:17: error: implicit declaration of function 'guest_timing_exit_irqoff'; did you mean 'guest_exit_irqoff'? [-Werror=implicit-function-declaration]
  925 |                 guest_timing_exit_irqoff();
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
      |                 guest_exit_irqoff
cc1: some warnings being treated as errors

Quoted 5 lines
Quoted 2 lines

build link:
-----------

I think this patch is missing:
https://lore.kernel.org/lkml/[email protected]/T/#m49f8ab674c269f14f57dae33f90af30617bc735f

Thanks, I'll go queue this up now and push out some -rc2 releases.

greg k-h