5.4.178-rc1 review

This is the start of the stable review cycle for the 5.4.178 release. There are 44 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.178-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.178-rc1

Waiman Long <[email protected]>
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

Ritesh Harjani <[email protected]>
ext4: fix error handling in ext4_restore_inline_data()

Sergey Shtylyov <[email protected]>
EDAC/xgene: Fix deferred probing

Sergey Shtylyov <[email protected]>
EDAC/altera: Fix deferred probing

Riwen Lu <[email protected]>
rtc: cmos: Evaluate century appropriate

Muhammad Usama Anjum <[email protected]>
selftests: futex: Use variable MAKE instead of make

Dai Ngo <[email protected]>
nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

John Meneghini <[email protected]>
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

Florian Fainelli <[email protected]>
pinctrl: bcm2835: Fix a few error paths

Dan Carpenter <[email protected]>
ASoC: max9759: fix underflow in speaker_gain_control_put()

Jiasheng Jiang <[email protected]>
ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes

Miaoqian Lin <[email protected]>
ASoC: fsl: Add missing error handling in pcm030_fabric_probe

Dan Carpenter <[email protected]>
drm/i915/overlay: Prevent divide by zero bugs in scaling

Yannick Vignon <[email protected]>
net: stmmac: ensure PTP time register reads are consistent

Camel Guo <[email protected]>
net: stmmac: dump gmac4 DMA registers correctly

Lior Nahmanson <[email protected]>
net: macsec: Verify that send_sci is on when setting Tx sci explicitly

Miquel Raynal <[email protected]>
net: ieee802154: Return meaningful error codes from the netlink helpers

Miquel Raynal <[email protected]>

    net: ieee802154: ca8210: Stop leaking skb's

Miquel Raynal <[email protected]>

    net: ieee802154: mcr20a: Fix lifs/sifs periods

Miquel Raynal <[email protected]>
net: ieee802154: hwsim: Ensure proper channel selection at probe time

Miaoqian Lin <[email protected]>
spi: meson-spicc: add IRQ check in meson_spicc_probe

Benjamin Gaignard <[email protected]>
spi: mediatek: Avoid NULL pointer crash in interrupt

Kamal Dasu <[email protected]>
spi: bcm-qspi: check for valid cs before applying chip select

Joerg Roedel <[email protected]>
iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

Guoqing Jiang <[email protected]>
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

Leon Romanovsky <[email protected]>
RDMA/mlx4: Don't continue event handler after memory allocation failure

Bernard Metzler <[email protected]>
RDMA/siw: Fix broken RDMA Read Fence/Resume logic.

Mike Marciniszyn <[email protected]>
IB/rdmavt: Validate remote_addr during loopback atomic tests

Yutian Yang <[email protected]>
memcg: charge fs_context and legacy_fs_context

Guenter Roeck <[email protected]>
Revert "ASoC: mediatek: Check for error clk pointer"

Martin K. Petersen <[email protected]>
block: bio-integrity: Advance seed correctly for larger interval sizes

Lang Yu <[email protected]>
mm/kmemleak: avoid scanning potential huge holes

Nick Lopez <[email protected]>
drm/nouveau: fix off by one in BIOS boundary checking

Shin'ichiro Kawasaki <[email protected]>
btrfs: fix deadlock between quota disable and qgroup rescan worker

Christian Lachner <[email protected]>
ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

Christian Lachner <[email protected]>
ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

Christian Lachner <[email protected]>
ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

Albert Geantă <[email protected]>
ALSA: hda/realtek: Add quirk for ASUS GU603

Takashi Iwai <[email protected]>
ALSA: usb-audio: Simplify quirk entries with a macro

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

Mark Brown <[email protected]>
ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

Paul Moore <[email protected]>
audit: improve audit queue handling when "audit=1" on cmdline

-------------

Diffstat:

 Makefile                                           |  4 +-
 block/bio-integrity.c                              |  2 +-
 drivers/edac/altera_edac.c                         |  2 +-
 drivers/edac/xgene_edac.c                          |  2 +-
 drivers/gpu/drm/i915/display/intel_overlay.c       |  3 ++
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c    |  2 +-
 drivers/infiniband/hw/mlx4/main.c                  |  2 +-
 drivers/infiniband/sw/rdmavt/qp.c                  |  2 +
 drivers/infiniband/sw/siw/siw.h                    |  7 +--
 drivers/infiniband/sw/siw/siw_qp_rx.c              | 20 +++----
 drivers/iommu/amd_iommu_init.c                     |  2 +
 drivers/iommu/intel_irq_remapping.c                | 13 +++--
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h    |  1 +
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   | 19 ++++++-
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  | 19 ++++---
 drivers/net/ieee802154/ca8210.c                    |  1 +
 drivers/net/ieee802154/mac802154_hwsim.c           |  1 +
 drivers/net/ieee802154/mcr20a.c                    |  4 +-
 drivers/net/macsec.c                               |  9 ++++
 drivers/pinctrl/bcm/pinctrl-bcm2835.c              | 23 +++++---
 drivers/rtc/rtc-mc146818-lib.c                     |  2 +-
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c                  | 21 +++++---
 drivers/soc/mediatek/mtk-scpsys.c                  | 15 ++----
 drivers/spi/spi-bcm-qspi.c                         |  2 +-
 drivers/spi/spi-meson-spicc.c                      |  5 ++
 drivers/spi/spi-mt65xx.c                           |  2 +-
 fs/btrfs/qgroup.c                                  | 21 +++++++-
 fs/ext4/inline.c                                   | 10 +++-
 fs/fs_context.c                                    |  4 +-
 fs/nfsd/nfs4state.c                                |  4 +-
 kernel/audit.c                                     | 62 +++++++++++++++-------
 kernel/cgroup/cpuset.c                             | 10 ++++
 mm/kmemleak.c                                      | 13 ++---
 net/ieee802154/nl802154.c                          |  8 +--
 sound/pci/hda/patch_realtek.c                      |  6 ++-
 sound/soc/codecs/cpcap.c                           |  2 +
 sound/soc/codecs/max9759.c                         |  3 +-
 sound/soc/fsl/pcm030-audio-fabric.c                | 11 ++--
 sound/soc/soc-ops.c                                | 29 ++++++++--
 sound/soc/xilinx/xlnx_formatter_pcm.c              | 27 ++++++++--
 sound/usb/quirks-table.h                           | 10 ++++
 tools/testing/selftests/futex/Makefile             |  4 +-
 42 files changed, 295 insertions(+), 114 deletions(-)

From: Paul Moore <[email protected]>

commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream.

When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time.

This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system.

- kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns.

- Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon.

- The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system.

- kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue().

---
 kernel/audit.c |   62 +++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 19 deletions(-)

@@ -535,20 +535,22 @@ static void kauditd_printk_skb(struct sk
 /**
  * kauditd_rehold_skb - Handle a audit record send failure in the hold queue
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * This should only be used by the kauditd_thread when it fails to flush the
  * hold queue.
  */
-static void kauditd_rehold_skb(struct sk_buff *skb)
+static void kauditd_rehold_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* put the record back in the queue at the same place */
-	skb_queue_head(&audit_hold_queue, skb);
+	/* put the record back in the queue */
+	skb_queue_tail(&audit_hold_queue, skb);
 }
 
 /**
  * kauditd_hold_skb - Queue an audit record, waiting for auditd
  * @skb: audit record
+ * @error: error code
  *
  * Description:
  * Queue the audit record, waiting for an instance of auditd.  When this

@@ -558,19 +560,31 @@ static void kauditd_rehold_skb(struct sk
  * and queue it, if we have room.  If we want to hold on to the record, but we
  * don't have room, record a record lost message.
  */
-static void kauditd_hold_skb(struct sk_buff *skb)
+static void kauditd_hold_skb(struct sk_buff *skb, int error)
 {
 	/* at this point it is uncertain if we will ever send this to auditd so
 	 * try to send the message via printk before we go any further */
 	kauditd_printk_skb(skb);
 
 	/* can we just silently drop the message? */
-	if (!audit_default) {
-		kfree_skb(skb);
-		return;
+	if (!audit_default)
+		goto drop;
+
+	/* the hold queue is only for when the daemon goes away completely,
+	 * not -EAGAIN failures; if we are in a -EAGAIN state requeue the
+	 * record on the retry queue unless it's full, in which case drop it
+	 */
+	if (error == -EAGAIN) {
+		if (!audit_backlog_limit ||
+		    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+			skb_queue_tail(&audit_retry_queue, skb);
+			return;
+		}
+		audit_log_lost("kauditd retry queue overflow");
+		goto drop;
 	}
 
-	/* if we have room, queue the message */
+	/* if we have room in the hold queue, queue the message */
 	if (!audit_backlog_limit ||
 	    skb_queue_len(&audit_hold_queue) < audit_backlog_limit) {
 		skb_queue_tail(&audit_hold_queue, skb);

@@ -579,24 +593,32 @@ static void kauditd_hold_skb(struct sk_b
 
 	/* we have no other options - drop the message */
 	audit_log_lost("kauditd hold queue overflow");
+drop:
 	kfree_skb(skb);
 }
 
 /**
  * kauditd_retry_skb - Queue an audit record, attempt to send again to auditd
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * Not as serious as kauditd_hold_skb() as we still have a connected auditd,
  * but for some reason we are having problems sending it audit records so
  * queue the given record and attempt to resend.
  */
-static void kauditd_retry_skb(struct sk_buff *skb)
+static void kauditd_retry_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* NOTE: because records should only live in the retry queue for a
-	 * short period of time, before either being sent or moved to the hold
-	 * queue, we don't currently enforce a limit on this queue */
-	skb_queue_tail(&audit_retry_queue, skb);
+	if (!audit_backlog_limit ||
+	    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+		skb_queue_tail(&audit_retry_queue, skb);
+		return;
+	}
+
+	/* we have to drop the record, send it via printk as a last effort */
+	kauditd_printk_skb(skb);
+	audit_log_lost("kauditd retry queue overflow");
+	kfree_skb(skb);
 }
 
 /**

@@ -634,7 +656,7 @@ static void auditd_reset(const struct au
 	/* flush the retry queue to the hold queue, but don't touch the main
 	 * queue since we need to process that normally for multicast */
 	while ((skb = skb_dequeue(&audit_retry_queue)))
-		kauditd_hold_skb(skb);
+		kauditd_hold_skb(skb, -ECONNREFUSED);
 }
 
 /**

@@ -708,16 +730,18 @@ static int kauditd_send_queue(struct soc
 			      struct sk_buff_head *queue,
 			      unsigned int retry_limit,
 			      void (*skb_hook)(struct sk_buff *skb),
-			      void (*err_hook)(struct sk_buff *skb))
+			      void (*err_hook)(struct sk_buff *skb, int error))
 {
 	int rc = 0;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
+	struct sk_buff *skb_tail;
 	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */
 
-	while ((skb = skb_dequeue(queue))) {
+	skb_tail = skb_peek_tail(queue);
+	while ((skb != skb_tail) && (skb = skb_dequeue(queue))) {
 		/* call the skb_hook for each skb we touch */
 		if (skb_hook)
 			(*skb_hook)(skb);

@@ -725,7 +749,7 @@ static int kauditd_send_queue(struct soc
 		/* can we send to anyone via unicast? */
 		if (!sk) {
 			if (err_hook)
-				(*err_hook)(skb);
+				(*err_hook)(skb, -ECONNREFUSED);
 			continue;
 		}
 

@@ -739,7 +763,7 @@ retry:
 			    rc == -ECONNREFUSED || rc == -EPERM) {
 				sk = NULL;
 				if (err_hook)
-					(*err_hook)(skb);
+					(*err_hook)(skb, rc);
 				if (rc == -EAGAIN)
 					rc = 0;
 				/* continue to drain the queue */

From: Mark Brown <[email protected]>

commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

@@ -322,13 +322,27 @@ int snd_soc_put_volsw(struct snd_kcontro
 	if (sign_bit)
 		mask = BIT(sign_bit + 1) - 1;
 
-	val = ((ucontrol->value.integer.value[0] + min) & mask);
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
+	val = (val + min) & mask;
 	if (invert)
 		val = max - val;
 	val_mask = mask << shift;
 	val = val << shift;
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val2 = ((ucontrol->value.integer.value[1] + min) & mask);
+		val2 = ucontrol->value.integer.value[1];
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max - min)
+			return -EINVAL;
+		if (val2 < 0)
+			return -EINVAL;
+		val2 = (val2 + min) & mask;
 		if (invert)
 			val2 = max - val2;
 		if (reg == reg2) {

From: Mark Brown <[email protected]>

commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -436,8 +436,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 	int err = 0;
 	unsigned int val, val_mask, val2 = 0;
 
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
 	val_mask = mask << shift;
-	val = (ucontrol->value.integer.value[0] + min) & mask;
+	val = (val + min) & mask;
 	val = val << shift;
 
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);

From: Mark Brown <[email protected]>

commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream.

We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.

---
 sound/soc/soc-ops.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -910,6 +910,8 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	unsigned int i, regval, regmask;
 	int err;
 
+	if (val < mc->min || val > mc->max)
+		return -EINVAL;
 	if (invert)
 		val = max - val;
 	val &= mask;

From: Takashi Iwai <[email protected]>

commit fa10635fca359f047df6a18b3befd2f1e7304e1a upstream.

Introduce a new macro USB_AUDIO_DEVICE() for the entries matching with the pid/vid pair and the class/subclass, and remove the open-code.

---
 sound/usb/quirks-table.h |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -25,6 +25,16 @@
 	.idProduct = prod, \
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC
 
+/* A standard entry matching with vid/pid and the audio class/subclass */
+#define USB_AUDIO_DEVICE(vend, prod) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.idVendor = vend, \
+	.idProduct = prod, \
+	.bInterfaceClass = USB_CLASS_AUDIO, \
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
+
 /* HP Thunderbolt Dock Audio Headset */
 {
 	USB_DEVICE(0x03f0, 0x0269),

From: Albert Geantă <[email protected]>

commit 94db9cc8f8fa2d5426ce79ec4ca16028f7084224 upstream.

The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to other ASUS devices for correctly routing the 4 integrated speakers. This fixes it by adding a corresponding quirk entry, which connects the bass speakers to the proper DAC.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -8180,6 +8180,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),

From: Christian Lachner <[email protected]>

commit 63394a16086fc2152869d7902621e2525e14bc40 upstream.

The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill effects but for completeness sake this commit makes up for that.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

@@ -2623,6 +2623,7 @@ static const struct hda_model_fixup alc8
 	{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
 	{.id = ALC887_FIXUP_ASUS_BASS, .name = "asus-bass"},
 	{.id = ALC1220_FIXUP_GB_DUAL_CODECS, .name = "dual-codecs"},
+	{.id = ALC1220_FIXUP_GB_X570, .name = "gb-x570"},
 	{.id = ALC1220_FIXUP_CLEVO_P950, .name = "clevo-p950"},
 	{}
 };

From: Christian Lachner <[email protected]>

commit 41a8601302ecbe704ac970552c33dc942300fc37 upstream.

Newer versions of the X570 Master come with a newer revision of the mainboard chipset - the X570S. These boards have the same ALC1220 codec but seem to initialize the codec with a different parameter in Coef 0x7 which causes the output audio to be very low. We therefore write a known-good value to Coef 0x7 to fix that. As the value is the exact same as on the other X570(non-S) boards the same quirk-function can be shared between both generations.

This commit adds the Gigabyte X570S Aorus Master to the list of boards using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output and the no-audio after reboot from windows problems.

This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -2122,6 +2122,7 @@ static void alc1220_fixup_gb_x570(struct
 {
 	static const hda_nid_t conn1[] = { 0x0c };
 	static const struct coef_fw gb_x570_coefs[] = {
+		WRITE_COEF(0x07, 0x03c0),
 		WRITE_COEF(0x1a, 0x01c1),
 		WRITE_COEF(0x1b, 0x0202),
 		WRITE_COEF(0x43, 0x3005),

@@ -2549,6 +2550,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),

From: Christian Lachner <[email protected]>

commit ea3541961376f733373839cc90493aafa8a7f733 upstream.

This commit switches the Gigabyte X570 Aorus Xtreme from using the ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes the no-audio after reboot from windows problem.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2549,7 +2549,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
-	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),

From: Shin'ichiro Kawasaki <[email protected]>

commit e804861bd4e69cc5fe1053eedcb024982dde8e48 upstream.

Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task.

The deadlock happens with the steps following:

1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes.
2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A.
3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed.

This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices.

An example report of the deadlock:

  [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds.
  [372.479944]       Not tainted 5.16.0-rc8 #7
  [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.493898] task:kworker/u16:6   state:D stack:    0 pid:  103 ppid:     2 flags:0x00004000
  [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs]
  [372.510782] Call Trace:
  [372.514092]  <TASK>
  [372.521684]  __schedule+0xb56/0x4850
  [372.530104]  ? io_schedule_timeout+0x190/0x190
  [372.538842]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.547092]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.555591]  schedule+0xe0/0x270
  [372.561894]  btrfs_commit_transaction+0x18bb/0x2610 [btrfs]
  [372.570506]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [372.578875]  ? free_unref_page+0x3f2/0x650
  [372.585484]  ? finish_wait+0x270/0x270
  [372.591594]  ? release_extent_buffer+0x224/0x420 [btrfs]
  [372.599264]  btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs]
  [372.607157]  ? lock_release+0x3a9/0x6d0
  [372.613054]  ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs]
  [372.620960]  ? do_raw_spin_lock+0x11e/0x250
  [372.627137]  ? rwlock_bug.part.0+0x90/0x90
  [372.633215]  ? lock_is_held_type+0xe4/0x140
  [372.639404]  btrfs_work_helper+0x1ae/0xa90 [btrfs]
  [372.646268]  process_one_work+0x7e9/0x1320
  [372.652321]  ? lock_release+0x6d0/0x6d0
  [372.658081]  ? pwq_dec_nr_in_flight+0x230/0x230
  [372.664513]  ? rwlock_bug.part.0+0x90/0x90
  [372.670529]  worker_thread+0x59e/0xf90
  [372.676172]  ? process_one_work+0x1320/0x1320
  [372.682440]  kthread+0x3b9/0x490
  [372.687550]  ? _raw_spin_unlock_irq+0x24/0x50
  [372.693811]  ? set_kthread_struct+0x100/0x100
  [372.700052]  ret_from_fork+0x22/0x30
  [372.705517]  </TASK>
  [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds.
  [372.729827]       Not tainted 5.16.0-rc8 #7
  [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [372.767106] task:btrfs-transacti state:D stack:    0 pid: 2347 ppid:     2 flags:0x00004000
  [372.787776] Call Trace:
  [372.801652]  <TASK>
  [372.812961]  __schedule+0xb56/0x4850
  [372.830011]  ? io_schedule_timeout+0x190/0x190
  [372.852547]  ? lockdep_hardirqs_on+0x7e/0x100
  [372.871761]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [372.886792]  schedule+0xe0/0x270
  [372.901685]  wait_current_trans+0x22c/0x310 [btrfs]
  [372.919743]  ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs]
  [372.938923]  ? finish_wait+0x270/0x270
  [372.959085]  ? join_transaction+0xc75/0xe30 [btrfs]
  [372.977706]  start_transaction+0x938/0x10a0 [btrfs]
  [372.997168]  transaction_kthread+0x19d/0x3c0 [btrfs]
  [373.013021]  ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs]
  [373.031678]  kthread+0x3b9/0x490
  [373.047420]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.064645]  ? set_kthread_struct+0x100/0x100
  [373.078571]  ret_from_fork+0x22/0x30
  [373.091197]  </TASK>
  [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds.
  [373.114147]       Not tainted 5.16.0-rc8 #7
  [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.130393] task:btrfs           state:D stack:    0 pid: 3145 ppid:  3141 flags:0x00004000
  [373.140998] Call Trace:
  [373.145501]  <TASK>
  [373.149654]  __schedule+0xb56/0x4850
  [373.155306]  ? io_schedule_timeout+0x190/0x190
  [373.161965]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.168469]  ? _raw_spin_unlock_irqrestore+0x3e/0x60
  [373.175468]  schedule+0xe0/0x270
  [373.180814]  wait_for_commit+0x104/0x150 [btrfs]
  [373.187643]  ? test_and_set_bit+0x20/0x20 [btrfs]
  [373.194772]  ? kmem_cache_free+0x124/0x550
  [373.201191]  ? btrfs_put_transaction+0x69/0x3d0 [btrfs]
  [373.208738]  ? finish_wait+0x270/0x270
  [373.214704]  ? __btrfs_end_transaction+0x347/0x7b0 [btrfs]
  [373.222342]  btrfs_commit_transaction+0x44d/0x2610 [btrfs]
  [373.230233]  ? join_transaction+0x255/0xe30 [btrfs]
  [373.237334]  ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs]
  [373.245251]  ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
  [373.253296]  relocate_block_group+0x105/0xc20 [btrfs]
  [373.260533]  ? mutex_lock_io_nested+0x1270/0x1270
  [373.267516]  ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs]
  [373.275155]  ? merge_reloc_roots+0x710/0x710 [btrfs]
  [373.283602]  ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs]
  [373.291934]  ? kmem_cache_free+0x124/0x550
  [373.298180]  btrfs_relocate_block_group+0x35c/0x930 [btrfs]
  [373.306047]  btrfs_relocate_chunk+0x85/0x210 [btrfs]
  [373.313229]  btrfs_balance+0x12f4/0x2d20 [btrfs]
  [373.320227]  ? lock_release+0x3a9/0x6d0
  [373.326206]  ? btrfs_relocate_chunk+0x210/0x210 [btrfs]
  [373.333591]  ? lock_is_held_type+0xe4/0x140
  [373.340031]  ? rcu_read_lock_sched_held+0x3f/0x70
  [373.346910]  btrfs_ioctl_balance+0x548/0x700 [btrfs]
  [373.354207]  btrfs_ioctl+0x7f2/0x71b0 [btrfs]
  [373.360774]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.367957]  ? lockdep_hardirqs_on_prepare+0x410/0x410
  [373.375327]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.383841]  ? find_held_lock+0x2c/0x110
  [373.389993]  ? lock_release+0x3a9/0x6d0
  [373.395828]  ? mntput_no_expire+0xf7/0xad0
  [373.402083]  ? lock_is_held_type+0xe4/0x140
  [373.408249]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.414486]  ? selinux_file_ioctl+0x349/0x4e0
  [373.420938]  ? trace_raw_output_lock+0xb4/0xe0
  [373.427442]  ? selinux_inode_getsecctx+0x80/0x80
  [373.434224]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.440660]  ? force_qs_rnp+0x2a0/0x6b0
  [373.446534]  ? lock_is_held_type+0x9b/0x140
  [373.452763]  ? __blkcg_punt_bio_submit+0x1b0/0x1b0
  [373.459732]  ? security_file_ioctl+0x50/0x90
  [373.466089]  __x64_sys_ioctl+0x127/0x190
  [373.472022]  do_syscall_64+0x3b/0x90
  [373.477513]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.484823] RIP: 0033:0x7f8f4af7e2bb
  [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb
  [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003
  [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0
  [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001
  [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002
  [373.546506]  </TASK>
  [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds.
  [373.559383]       Not tainted 5.16.0-rc8 #7
  [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [373.575748] task:btrfs           state:D stack:    0 pid: 3146 ppid:  2168 flags:0x00000000
  [373.586314] Call Trace:
  [373.590846]  <TASK>
  [373.595121]  __schedule+0xb56/0x4850
  [373.600901]  ? __lock_acquire+0x23db/0x5030
  [373.607176]  ? io_schedule_timeout+0x190/0x190
  [373.613954]  schedule+0xe0/0x270
  [373.619157]  schedule_timeout+0x168/0x220
  [373.625170]  ? usleep_range_state+0x150/0x150
  [373.631653]  ? mark_held_locks+0x9e/0xe0
  [373.637767]  ? do_raw_spin_lock+0x11e/0x250
  [373.643993]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
  [373.651267]  ? _raw_spin_unlock_irq+0x24/0x50
  [373.657677]  ? lockdep_hardirqs_on+0x7e/0x100
  [373.664103]  wait_for_completion+0x163/0x250
  [373.670437]  ? bit_wait_timeout+0x160/0x160
  [373.676585]  btrfs_quota_disable+0x176/0x9a0 [btrfs]
  [373.683979]  ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs]
  [373.691340]  ? down_write+0xd0/0x130
  [373.696880]  ? down_write_killable+0x150/0x150
  [373.703352]  btrfs_ioctl+0x3945/0x71b0 [btrfs]
  [373.710061]  ? find_held_lock+0x2c/0x110
  [373.716192]  ? lock_release+0x3a9/0x6d0
  [373.722047]  ? __handle_mm_fault+0x23cd/0x3050
  [373.728486]  ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs]
  [373.737032]  ? set_pte+0x6a/0x90
  [373.742271]  ? do_raw_spin_unlock+0x55/0x1f0
  [373.748506]  ? lock_is_held_type+0xe4/0x140
  [373.754792]  ? vfs_fileattr_set+0x9f0/0x9f0
  [373.761083]  ? selinux_file_ioctl+0x349/0x4e0
  [373.767521]  ? selinux_inode_getsecctx+0x80/0x80
  [373.774247]  ? __up_read+0x182/0x6e0
  [373.780026]  ? count_memcg_events.constprop.0+0x46/0x60
  [373.787281]  ? up_write+0x460/0x460
  [373.792932]  ? security_file_ioctl+0x50/0x90
  [373.799232]  __x64_sys_ioctl+0x127/0x190
  [373.805237]  do_syscall_64+0x3b/0x90
  [373.810947]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [373.818102] RIP: 0033:0x7f1383ea02bb
  [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb
  [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003
  [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
  [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a
  [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000
  [373.879838]  </TASK>
  [373.884018]
               Showing all locks held in the system:
  [373.894250] 3 locks held by kworker/4:1/58:
  [373.900356] 1 lock held by khungtaskd/63:
  [373.906333]  #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260
  [373.917307] 3 locks held by kworker/u16:6/103:
  [373.923938]  #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320
  [373.936555]  #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320
  [373.951109]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs]
  [373.964027] 2 locks held by less/1803:
  [373.969982]  #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80
  [373.981295]  #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060
  [373.992969] 1 lock held by btrfs-transacti/2347:
  [373.999893]  #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs]
  [374.015872] 3 locks held by btrfs/3145:
  [374.022298]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs]
  [374.034456]  #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs]
  [374.047646]  #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs]
  [374.063295] 4 locks held by btrfs/3146:
  [374.069647]  #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs]
  [374.081601]  #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs]
  [374.094283]  #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs]
  [374.106885]  #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs]

  [374.126780] =============================================

To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem.

Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed.

---
 fs/btrfs/qgroup.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

@@ -1105,9 +1105,24 @@ int btrfs_quota_disable(struct btrfs_fs_
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
+	/*
+	 * We need to have subvol_sem write locked, to prevent races between
+	 * concurrent tasks trying to disable quotas, because we will unlock
+	 * and relock qgroup_ioctl_lock across BTRFS_FS_QUOTA_ENABLED changes.
+	 */
+	lockdep_assert_held_write(&fs_info->subvol_sem);
+
 	mutex_lock(&fs_info->qgroup_ioctl_lock);
 	if (!fs_info->quota_root)
 		goto out;
+
+	/*
+	 * Request qgroup rescan worker to complete and wait for it. This wait
+	 * must be done before transaction start for quota disable since it may
+	 * deadlock with transaction by the qgroup rescan worker.
+	 */
+	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
+	btrfs_qgroup_wait_for_completion(fs_info, false);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 
 	/*

@@ -1125,14 +1140,13 @@ int btrfs_quota_disable(struct btrfs_fs_
 	if (IS_ERR(trans)) {
 		ret = PTR_ERR(trans);
 		trans = NULL;
+		set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
 		goto out;
 	}
 
 	if (!fs_info->quota_root)
 		goto out;
 
-	clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
-	btrfs_qgroup_wait_for_completion(fs_info, false);
 	spin_lock(&fs_info->qgroup_lock);
 	quota_root = fs_info->quota_root;
 	fs_info->quota_root = NULL;

@@ -3304,6 +3318,9 @@ qgroup_rescan_init(struct btrfs_fs_info
 			btrfs_warn(fs_info,
 			"qgroup rescan init failed, qgroup is not enabled");
 			ret = -EINVAL;
+		} else if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags)) {
+			/* Quota disable is in progress */
+			ret = -EBUSY;
 		}
 
 		if (ret) {

From: Nick Lopez <[email protected]>

commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.

Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console.

This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed.

---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -38,7 +38,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 		*addr += bios->imaged_addr;
 	}
 
-	if (unlikely(*addr + size >= bios->size)) {
+	if (unlikely(*addr + size > bios->size)) {
 		nvkm_error(&bios->subdev, "OOB %d %08x %08x\n", size, p, *addr);
 		return false;
 	}

From: Lang Yu <[email protected]>

commit c10a0f877fe007021d70f9cada240f42adc2b5db upstream.

When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn().

We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole.

  for (pfn = start_pfn; pfn < end_pfn; pfn++) {
	struct page *page = pfn_to_online_page(pfn);
		if (!page)
			continue;
	...

}

So we got a soft lockup:

  watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
  CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
  RIP: 0010:pfn_to_online_page+0x5/0xd0
  Call Trace:
    ? kmemleak_scan+0x16a/0x440
    kmemleak_write+0x306/0x3a0
    ? common_file_perm+0x72/0x170
    full_proxy_write+0x5c/0x90
    vfs_write+0xb9/0x260
    ksys_write+0x67/0xe0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x3b/0xc0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

I did some tests with the patch.

(1) amdgpu module unloaded

before the patch:

  real    0m0.976s
  user    0m0.000s
  sys     0m0.968s

after the patch:

  real    0m0.981s
  user    0m0.000s
  sys     0m0.973s

(2) amdgpu module loaded

before the patch:

  real    0m35.365s
  user    0m0.000s
  sys     0m35.354s

after the patch:

  real    0m1.049s
  user    0m0.000s
  sys     0m1.042s

---
 mm/kmemleak.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

@@ -1399,7 +1399,8 @@ static void kmemleak_scan(void)
 {
 	unsigned long flags;
 	struct kmemleak_object *object;
-	int i;
+	struct zone *zone;
+	int __maybe_unused i;
 	int new_leaks = 0;
 
 	jiffies_last_scan = jiffies;

@@ -1439,9 +1440,9 @@ static void kmemleak_scan(void)
 	 * Struct page scanning for each node.
 	 */
 	get_online_mems();
-	for_each_online_node(i) {
-		unsigned long start_pfn = node_start_pfn(i);
-		unsigned long end_pfn = node_end_pfn(i);
+	for_each_populated_zone(zone) {
+		unsigned long start_pfn = zone->zone_start_pfn;
+		unsigned long end_pfn = zone_end_pfn(zone);
 		unsigned long pfn;
 
 		for (pfn = start_pfn; pfn < end_pfn; pfn++) {

@@ -1450,8 +1451,8 @@ static void kmemleak_scan(void)
 			if (!page)
 				continue;
 
-			/* only scan pages belonging to this node */
-			if (page_to_nid(page) != i)
+			/* only scan pages belonging to this zone */
+			if (page_zone(page) != zone)
 				continue;
 			/* only scan if page is in use */
 			if (page_count(page) == 0)

From: Martin K. Petersen <[email protected]>

commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks.

The seed value should be advanced by bio_integrity_intervals() and not the number of sectors.

---
 block/bio-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -380,7 +380,7 @@ void bio_integrity_advance(struct bio *b
 	struct blk_integrity *bi = blk_get_integrity(bio->bi_disk);
 	unsigned bytes = bio_integrity_bytes(bi, bytes_done >> 9);
 
-	bip->bip_iter.bi_sector += bytes_done >> 9;
+	bip->bip_iter.bi_sector += bio_integrity_intervals(bi, bytes_done >> 9);
 	bvec_iter_advance(bip->bip_vec, &bip->bip_iter, bytes);
 }
 

From: Guenter Roeck <[email protected]>

This reverts commit 8b894d503ed79c3e1a96eab50a69ff29e5aade34 which is commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream

With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem.

An analysis of the code with this patch applied shows:

        ret = init_clks(pdev, clk);
        if (ret)
                return ERR_PTR(ret);
...
                for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
                        struct clk *c = clk[data->clk_id[j]];

                        if (IS_ERR(c)) {
                                dev_err(&pdev->dev, "%s: clk unavailable\n",
                                        data->name);
                                return ERR_CAST(c);
                        }

                        scpd->clk[j] = c;
                }

Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be reverted.

---
 drivers/soc/mediatek/mtk-scpsys.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

@@ -333,17 +333,12 @@ out:
 	return ret;
 }
 
-static int init_clks(struct platform_device *pdev, struct clk **clk)
+static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
 
-	for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
+	for (i = CLK_NONE + 1; i < CLK_MAX; i++)
 		clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
-		if (IS_ERR(clk[i]))
-			return PTR_ERR(clk[i]);
-	}
-
-	return 0;
 }
 
 static struct scp *init_scp(struct platform_device *pdev,

@@ -353,7 +348,7 @@ static struct scp *init_scp(struct platf
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
-	int i, j, ret;
+	int i, j;
 	struct scp *scp;
 	struct clk *clk[CLK_MAX];
 

@@ -408,9 +403,7 @@ static struct scp *init_scp(struct platf
 
 	pd_data->num_domains = num;
 
-	ret = init_clks(pdev, clk);
-	if (ret)
-		return ERR_PTR(ret);
+	init_clks(pdev, clk);
 
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];

From: Yutian Yang <[email protected]>

commit bb902cb47cf93b33cd92b3b7a4019330a03ef57f upstream.

This patch adds accounting flags to fs_context and legacy_fs_context allocation sites so that kernel could correctly charge these objects.

We have written a PoC to demonstrate the effect of the missing-charging bugs. The PoC takes around 1,200MB unaccounted memory, while it is charged for only 362MB memory usage. We evaluate the PoC on QEMU x86_64 v5.2.90 + Linux kernel v5.10.19 + Debian buster. All the limitations including ulimits and sysctl variables are set as default. Specifically, the hard NOFILE limit and nr_open in sysctl are both 1,048,576.

/*------------------------- POC code ----------------------------*/

#define _GNU_SOURCE
#include <sys/types.h>
#include <sys/file.h>
#include <time.h>
#include <sys/wait.h>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <sched.h>
#include <fcntl.h>
#include <linux/mount.h>

#define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                        } while (0)

#define STACK_SIZE (8 * 1024)
#ifndef __NR_fsopen
#define __NR_fsopen 430
#endif
static inline int fsopen(const char *fs_name, unsigned int flags)

{
        return syscall(__NR_fsopen, fs_name, flags);
}

static char thread_stack[512][STACK_SIZE];

int thread_fn(void* arg)
{

  for (int i = 0; i< 800000; ++i) {
    int fsfd = fsopen("nfs", FSOPEN_CLOEXEC);
    if (fsfd == -1) {
      errExit("fsopen");
    }

}
while(1);
return 0;
}

int main(int argc, char *argv[]) {
int thread_pid;

  for (int i = 0; i < 1; ++i) {
    thread_pid = clone(thread_fn, thread_stack[i] + STACK_SIZE, \
      SIGCHLD, NULL);

}
while(1);
return 0;
}

/*-------------------------- end --------------------------------*/

---
 fs/fs_context.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -258,7 +258,7 @@ static struct fs_context *alloc_fs_conte
 	struct fs_context *fc;
 	int ret = -ENOMEM;
 
-	fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL);
+	fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL_ACCOUNT);
 	if (!fc)
 		return ERR_PTR(-ENOMEM);
 

@@ -686,7 +686,7 @@ const struct fs_context_operations legac
  */
 static int legacy_init_fs_context(struct fs_context *fc)
 {
-	fc->fs_private = kzalloc(sizeof(struct legacy_fs_context), GFP_KERNEL);
+	fc->fs_private = kzalloc(sizeof(struct legacy_fs_context), GFP_KERNEL_ACCOUNT);
 	if (!fc->fs_private)
 		return -ENOMEM;
 	fc->ops = &legacy_fs_context_ops;

From: Mike Marciniszyn <[email protected]>

commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream.

The rdma-core test suite sends an unaligned remote address and expects a failure.

ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest)

The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system.

The loopback of these operations is a distinct code path.

Fix by syntaxing the proposed remote address in the loopback code path.

---
 drivers/infiniband/sw/rdmavt/qp.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -3110,6 +3110,8 @@ do_write:
 	case IB_WR_ATOMIC_FETCH_AND_ADD:
 		if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
 			goto inv_err;
+		if (unlikely(wqe->atomic_wr.remote_addr & (sizeof(u64) - 1)))
+			goto inv_err;
 		if (unlikely(!rvt_rkey_ok(qp, &qp->r_sge.sge, sizeof(u64),
 					  wqe->atomic_wr.remote_addr,
 					  wqe->atomic_wr.rkey,

From: Bernard Metzler <[email protected]>

commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream.

Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore.

---
 drivers/infiniband/sw/siw/siw.h       |    7 +------
 drivers/infiniband/sw/siw/siw_qp_rx.c |   20 +++++++++++---------
 2 files changed, 12 insertions(+), 15 deletions(-)

@@ -658,14 +658,9 @@ static inline struct siw_sqe *orq_get_cu
 	return &qp->orq[qp->orq_get % qp->attrs.orq_size];
 }
 
-static inline struct siw_sqe *orq_get_tail(struct siw_qp *qp)
-{
-	return &qp->orq[qp->orq_put % qp->attrs.orq_size];
-}
-
 static inline struct siw_sqe *orq_get_free(struct siw_qp *qp)
 {
-	struct siw_sqe *orq_e = orq_get_tail(qp);
+	struct siw_sqe *orq_e = &qp->orq[qp->orq_put % qp->attrs.orq_size];
 
 	if (READ_ONCE(orq_e->flags) == 0)
 		return orq_e;

@@ -1153,11 +1153,12 @@ static int siw_check_tx_fence(struct siw
 
 	spin_lock_irqsave(&qp->orq_lock, flags);
 
-	rreq = orq_get_current(qp);
-
 	/* free current orq entry */
+	rreq = orq_get_current(qp);
 	WRITE_ONCE(rreq->flags, 0);
 
+	qp->orq_get++;
+
 	if (qp->tx_ctx.orq_fence) {
 		if (unlikely(tx_waiting->wr_status != SIW_WR_QUEUED)) {
 			pr_warn("siw: [QP %u]: fence resume: bad status %d\n",

@@ -1165,10 +1166,12 @@ static int siw_check_tx_fence(struct siw
 			rv = -EPROTO;
 			goto out;
 		}
-		/* resume SQ processing */
+		/* resume SQ processing, if possible */
 		if (tx_waiting->sqe.opcode == SIW_OP_READ ||
 		    tx_waiting->sqe.opcode == SIW_OP_READ_LOCAL_INV) {
-			rreq = orq_get_tail(qp);
+
+			/* SQ processing was stopped because of a full ORQ */
+			rreq = orq_get_free(qp);
 			if (unlikely(!rreq)) {
 				pr_warn("siw: [QP %u]: no ORQE\n", qp_id(qp));
 				rv = -EPROTO;

@@ -1181,15 +1184,14 @@ static int siw_check_tx_fence(struct siw
 			resume_tx = 1;
 
 		} else if (siw_orq_empty(qp)) {
+			/*
+			 * SQ processing was stopped by fenced work request.
+			 * Resume since all previous Read's are now completed.
+			 */
 			qp->tx_ctx.orq_fence = 0;
 			resume_tx = 1;
-		} else {
-			pr_warn("siw: [QP %u]: fence resume: orq idx: %d:%d\n",
-				qp_id(qp), qp->orq_get, qp->orq_put);
-			rv = -EPROTO;
 		}
 	}
-	qp->orq_get++;
 out:
 	spin_unlock_irqrestore(&qp->orq_lock, flags);
 

From: Leon Romanovsky <[email protected]>

commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream.

The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway.

Fix it by calling to return instead of break after memory allocation failure.

---
 drivers/infiniband/hw/mlx4/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3291,7 +3291,7 @@ static void mlx4_ib_event(struct mlx4_de
 	case MLX4_DEV_EVENT_PORT_MGMT_CHANGE:
 		ew = kmalloc(sizeof *ew, GFP_ATOMIC);
 		if (!ew)
-			break;
+			return;
 
 		INIT_WORK(&ew->work, handle_port_mgmt_change_event);
 		memcpy(&ew->ib_eqe, eqe, sizeof *eqe);

From: Guoqing Jiang <[email protected]>

commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream.

After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error.

Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation.

Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion.

---
 drivers/iommu/intel_irq_remapping.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

@@ -570,9 +570,8 @@ static int intel_setup_irq_remapping(str
 					    fn, &intel_ir_domain_ops,
 					    iommu);
 	if (!iommu->ir_domain) {
-		irq_domain_free_fwnode(fn);
 		pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
-		goto out_free_bitmap;
+		goto out_free_fwnode;
 	}
 	iommu->ir_msi_domain =
 		arch_create_remap_msi_irq_domain(iommu->ir_domain,

@@ -596,7 +595,7 @@ static int intel_setup_irq_remapping(str
 
 		if (dmar_enable_qi(iommu)) {
 			pr_err("Failed to enable queued invalidation\n");
-			goto out_free_bitmap;
+			goto out_free_ir_domain;
 		}
 	}
 

@@ -620,6 +619,14 @@ static int intel_setup_irq_remapping(str
 
 	return 0;
 
+out_free_ir_domain:
+	if (iommu->ir_msi_domain)
+		irq_domain_remove(iommu->ir_msi_domain);
+	iommu->ir_msi_domain = NULL;
+	irq_domain_remove(iommu->ir_domain);
+	iommu->ir_domain = NULL;
+out_free_fwnode:
+	irq_domain_free_fwnode(fn);
 out_free_bitmap:
 	bitmap_free(bitmap);
 out_free_pages:

From: Joerg Roedel <[email protected]>

commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.

The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix.

---
 drivers/iommu/amd_iommu_init.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -21,6 +21,7 @@
 #include <linux/iommu.h>
 #include <linux/kmemleak.h>
 #include <linux/mem_encrypt.h>
+#include <linux/iopoll.h>
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/apic.h>

@@ -759,6 +760,7 @@ static int iommu_ga_log_enable(struct am
 		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
 		if (status & (MMIO_STATUS_GALOG_RUN_MASK))
 			break;
+		udelay(10);
 	}
 
 	if (i >= LOOP_TIMEOUT)

From: Kamal Dasu <[email protected]>

commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.

Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

---
 drivers/spi/spi-bcm-qspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -509,7 +509,7 @@ static void bcm_qspi_chip_select(struct
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)

From: Benjamin Gaignard <[email protected]>

commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream.

In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter.

---
 drivers/spi/spi-mt65xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -533,7 +533,7 @@ static irqreturn_t mtk_spi_interrupt(int
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,

From: Miaoqian Lin <[email protected]>

commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream.

This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s.

---
 drivers/spi/spi-meson-spicc.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -527,6 +527,11 @@ static int meson_spicc_probe(struct plat
 	writel_relaxed(0, spicc->base + SPICC_INTREG);
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out_master;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq,
 			       0, NULL, spicc);
 	if (ret) {

From: Miquel Raynal <[email protected]>

commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream.

Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13.

---
 drivers/net/ieee802154/mac802154_hwsim.c |    1 +
 1 file changed, 1 insertion(+)

@@ -786,6 +786,7 @@ static int hwsim_add_one(struct genl_inf
 		goto err_pib;
 	}
 
+	pib->channel = 13;
 	rcu_assign_pointer(phy->pib, pib);
 	phy->idx = idx;
 	INIT_LIST_HEAD(&phy->edges);

From: Miquel Raynal <[email protected]>

commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream.

These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds.

---
 drivers/net/ieee802154/mcr20a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -976,8 +976,8 @@ static void mcr20a_hw_setup(struct mcr20
 	dev_dbg(printdev(lp), "%s\n", __func__);
 
 	phy->symbol_duration = 16;
-	phy->lifs_period = 40;
-	phy->sifs_period = 12;
+	phy->lifs_period = 40 * phy->symbol_duration;
+	phy->sifs_period = 12 * phy->symbol_duration;
 
 	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
 			IEEE802154_HW_AFILT |

From: Miquel Raynal <[email protected]>

commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.

Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure.

Free the skb structure upon error before returning.

---
 drivers/net/ieee802154/ca8210.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1770,6 +1770,7 @@ static int ca8210_async_xmit_complete(
 			status
 		);
 		if (status != MAC_TRANSACTION_OVERFLOW) {
+			dev_kfree_skb_any(priv->tx_skb);
 			ieee802154_wake_queue(priv->hw);
 			return 0;
 		}

From: Miquel Raynal <[email protected]>

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

---
 net/ieee802154/nl802154.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -1457,7 +1457,7 @@ static int nl802154_send_key(struct sk_b
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

@@ -1650,7 +1650,7 @@ static int nl802154_send_device(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

@@ -1828,7 +1828,7 @@ static int nl802154_send_devkey(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

@@ -2004,7 +2004,7 @@ static int nl802154_send_seclevel(struct
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

From: Lior Nahmanson <[email protected]>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci.

Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases.

---
 drivers/net/macsec.c |    9 +++++++++
 1 file changed, 9 insertions(+)

@@ -3247,6 +3247,15 @@ static int macsec_newlink(struct net *ne
 
 	macsec->real_dev = real_dev;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);

From: Camel Guo <[email protected]>

commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream.

Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers.

This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0":

BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
 kasan_report+0x200/0x21c
 __asan_report_store4_noabort+0x34/0x60
 dwmac4_dump_dma_regs+0x6d4/0xb30
 stmmac_ethtool_gregs+0x110/0x204
 ethtool_get_regs+0x200/0x4b0
 dev_ethtool+0x1dac/0x3800
 dev_ioctl+0x7c0/0xb50
 sock_ioctl+0x298/0x6c4
 ...

---
 drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h      |    1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c |   19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

@@ -128,6 +128,7 @@
 
 #define NUM_DWMAC100_DMA_REGS	9
 #define NUM_DWMAC1000_DMA_REGS	23
+#define NUM_DWMAC4_DMA_REGS	27
 
 void dwmac_enable_dma_transmission(void __iomem *ioaddr);
 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan);

@@ -21,10 +21,18 @@
 #include "dwxgmac2.h"
 
 #define REG_SPACE_SIZE	0x1060
+#define GMAC4_REG_SPACE_SIZE	0x116C
 #define MAC100_ETHTOOL_NAME	"st_mac100"
 #define GMAC_ETHTOOL_NAME	"st_gmac"
 #define XGMAC_ETHTOOL_NAME	"st_xgmac"
 
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h
+ *
+ * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the
+ * same time due to the conflicting macro names.
+ */
+#define GMAC4_DMA_CHAN_BASE_ADDR  0x00001100
+
 #define ETHTOOL_DMA_OFFSET	55
 
 struct stmmac_stats {

@@ -413,6 +421,8 @@ static int stmmac_ethtool_get_regs_len(s
 
 	if (priv->plat->has_xgmac)
 		return XGMAC_REGSIZE * 4;
+	else if (priv->plat->has_gmac4)
+		return GMAC4_REG_SPACE_SIZE;
 	return REG_SPACE_SIZE;
 }
 

@@ -425,8 +435,13 @@ static void stmmac_ethtool_gregs(struct
 	stmmac_dump_mac_regs(priv, priv->hw, reg_space);
 	stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
 
-	if (!priv->plat->has_xgmac) {
-		/* Copy DMA registers to where ethtool expects them */
+	/* Copy DMA registers to where ethtool expects them */
+	if (priv->plat->has_gmac4) {
+		/* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */
+		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
+		       &reg_space[GMAC4_DMA_CHAN_BASE_ADDR / 4],
+		       NUM_DWMAC4_DMA_REGS * 4);
+	} else if (!priv->plat->has_xgmac) {
 		memcpy(&reg_space[ETHTOOL_DMA_OFFSET],
 		       &reg_space[DMA_BUS_MODE / 4],
 		       NUM_DWMAC1000_DMA_REGS * 4);

From: Yannick Vignon <[email protected]>

commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.

Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

@@ -149,15 +149,20 @@ static int adjust_systime(void __iomem *
 
 static void get_systime(void __iomem *ioaddr, u64 *systime)
 {
-	u64 ns;
+	u64 ns, sec0, sec1;
 
-	/* Get the TSSS value */
-	ns = readl(ioaddr + PTP_STNSR);
-	/* Get the TSS and convert sec time value to nanosecond */
-	ns += readl(ioaddr + PTP_STSR) * 1000000000ULL;
+	/* Get the TSS value */
+	sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	do {
+		sec0 = sec1;
+		/* Get the TSSS value */
+		ns = readl_relaxed(ioaddr + PTP_STNSR);
+		/* Get the TSS value */
+		sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	} while (sec0 != sec1);
 
 	if (systime)
-		*systime = ns;
+		*systime = ns + (sec1 * 1000000000ULL);
 }
 
 const struct stmmac_hwtimestamp stmmac_ptp = {

From: Dan Carpenter <[email protected]>

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.

Smatch detected a divide by zero bug in check_overlay_scaling().

    drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_height'.
    drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_width'.

Prevent this by ensuring that the dst height and width are non-zero.

---
 drivers/gpu/drm/i915/display/intel_overlay.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -913,6 +913,9 @@ static int check_overlay_dst(struct inte
 	const struct intel_crtc_state *pipe_config =
 		overlay->crtc->config;
 
+	if (rec->dst_height == 0 || rec->dst_width == 0)
+		return -EINVAL;
+
 	if (rec->dst_x < pipe_config->pipe_src_w &&
 	    rec->dst_x + rec->dst_width <= pipe_config->pipe_src_w &&
 	    rec->dst_y < pipe_config->pipe_src_h &&

From: Miaoqian Lin <[email protected]>

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del() before return from pcm030_fabric_probe in the error handling case.

---
 sound/soc/fsl/pcm030-audio-fabric.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

@@ -93,16 +93,21 @@ static int pcm030_fabric_probe(struct pl
 		dev_err(&op->dev, "platform_device_alloc() failed\n");
 
 	ret = platform_device_add(pdata->codec_device);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
+		platform_device_put(pdata->codec_device);
+	}
 
 	ret = snd_soc_register_card(card);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+		platform_device_del(pdata->codec_device);
+		platform_device_put(pdata->codec_device);
+	}
 
 	platform_set_drvdata(op, pdata);
-
 	return ret;
+
 }
 
 static int pcm030_fabric_remove(struct platform_device *op)

From: Robert Hancock <[email protected]>

commit e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream.

This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make buffer bytes multiple of period bytes" by Devarsh Thakkar. The same issue exists in the mainline version of the driver. The original patch description is as follows:

"The Xilinx Audio Formatter IP has a constraint on period bytes to be multiple of 64. This leads to driver changing the period size to suitable frames such that period bytes are multiple of 64.

Now since period bytes and period size are updated but not the buffer bytes, this may make the buffer bytes unaligned and not multiple of period bytes.

When this happens we hear popping noise as while DMA is being done the buffer bytes are not enough to complete DMA access for last period of frame within the application buffer boundary.

To avoid this, align buffer bytes too as multiple of 64, and set another constraint to always enforce number of periods as integer. Now since, there is already a rule in alsa core to enforce Buffer size = Number of Periods * Period Size this automatically aligns buffer bytes as multiple of period bytes."

---
 sound/soc/xilinx/xlnx_formatter_pcm.c |   27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

@@ -37,6 +37,7 @@
 #define XLNX_AUD_XFER_COUNT	0x28
 #define XLNX_AUD_CH_STS_START	0x2C
 #define XLNX_BYTES_PER_CH	0x44
+#define XLNX_AUD_ALIGN_BYTES	64
 
 #define AUD_STS_IOC_IRQ_MASK	BIT(31)
 #define AUD_STS_CH_STS_MASK	BIT(29)

@@ -370,12 +371,32 @@ static int xlnx_formatter_pcm_open(struc
 	snd_soc_set_runtime_hwparams(substream, &xlnx_pcm_hardware);
 	runtime->private_data = stream_data;
 
-	/* Resize the period size divisible by 64 */
+	/* Resize the period bytes as divisible by 64 */
 	err = snd_pcm_hw_constraint_step(runtime, 0,
-					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64);
+					 SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
 	if (err) {
 		dev_err(component->dev,
-			"unable to set constraint on period bytes\n");
+			"Unable to set constraint on period bytes\n");
+		return err;
+	}
+
+	/* Resize the buffer bytes as divisible by 64 */
+	err = snd_pcm_hw_constraint_step(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+					 XLNX_AUD_ALIGN_BYTES);
+	if (err) {
+		dev_err(component->dev,
+			"Unable to set constraint on buffer bytes\n");
+		return err;
+	}
+
+	/* Set periods as integer multiple */
+	err = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0) {
+		dev_err(component->dev,
+			"Unable to set constraint on periods to be integer\n");
 		return err;
 	}
 

From: Jiasheng Jiang <[email protected]>

commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.

If the device does not exist, of_get_child_by_name() will return NULL pointer.
And devm_snd_soc_register_component() does not check it. Also, I have noticed that cpcap_codec_driver has not been used yet. Therefore, it should be better to check it in order to avoid the future dereference of the NULL pointer.

---
 sound/soc/codecs/cpcap.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1541,6 +1541,8 @@ static int cpcap_codec_probe(struct plat
 {
 	struct device_node *codec_node =
 		of_get_child_by_name(pdev->dev.parent->of_node, "audio-codec");
+	if (!codec_node)
+		return -ENODEV;
 
 	pdev->dev.of_node = codec_node;
 

From: Dan Carpenter <[email protected]>

commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.

Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()

    -> snd_ctl_elem_write()
      -> kctl->put()

---
 sound/soc/codecs/max9759.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -64,7 +64,8 @@ static int speaker_gain_control_put(stru
 	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
 	struct max9759 *priv = snd_soc_component_get_drvdata(c);
 
-	if (ucontrol->value.integer.value[0] > 3)
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 3)
 		return -EINVAL;
 
 	priv->gain = ucontrol->value.integer.value[0];

From: Florian Fainelli <[email protected]>

commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream.

After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") a few error paths would not unwind properly the registration of gpio ranges. Correct that by assigning a single error label and goto it whenever we encounter a fatal error.

---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

@@ -1261,16 +1261,18 @@ static int bcm2835_pinctrl_probe(struct
 				     sizeof(*girq->parents),
 				     GFP_KERNEL);
 	if (!girq->parents) {
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto out_remove;
 	}
 
 	if (is_7211) {
 		pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS,
 					    sizeof(*pc->wake_irq),
 					    GFP_KERNEL);
-		if (!pc->wake_irq)
-			return -ENOMEM;
+		if (!pc->wake_irq) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 	}
 
 	/*

@@ -1294,8 +1296,10 @@ static int bcm2835_pinctrl_probe(struct
 
 		len = strlen(dev_name(pc->dev)) + 16;
 		name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
-		if (!name)
-			return -ENOMEM;
+		if (!name) {
+			err = -ENOMEM;
+			goto out_remove;
+		}
 
 		snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
 

@@ -1314,11 +1318,14 @@ static int bcm2835_pinctrl_probe(struct
 	err = gpiochip_add_data(&pc->gpio_chip, pc);
 	if (err) {
 		dev_err(dev, "could not add GPIO chip\n");
-		pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
-		return err;
+		goto out_remove;
 	}
 
 	return 0;
+
+out_remove:
+	pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
+	return err;
 }
 
 static struct platform_driver bcm2835_pinctrl_driver = {

From: John Meneghini <[email protected]>

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section.

---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

@@ -506,7 +506,8 @@ static int bnx2fc_l2_rcv_thread(void *ar
 
 static void bnx2fc_recv_frame(struct sk_buff *skb)
 {
-	u32 fr_len;
+	u64 crc_err;
+	u32 fr_len, fr_crc;
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fc_stats *stats;

@@ -540,6 +541,11 @@ static void bnx2fc_recv_frame(struct sk_
 	skb_pull(skb, sizeof(struct fcoe_hdr));
 	fr_len = skb->len - sizeof(struct fcoe_crc_eof);
 
+	stats = per_cpu_ptr(lport->stats, get_cpu());
+	stats->RxFrames++;
+	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	put_cpu();
+
 	fp = (struct fc_frame *)skb;
 	fc_frame_init(fp);
 	fr_dev(fp) = lport;

@@ -622,16 +628,15 @@ static void bnx2fc_recv_frame(struct sk_
 		return;
 	}
 
-	stats = per_cpu_ptr(lport->stats, smp_processor_id());
-	stats->RxFrames++;
-	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	fr_crc = le32_to_cpu(fr_crc(fp));
 
-	if (le32_to_cpu(fr_crc(fp)) !=
-			~crc32(~0, skb->data, fr_len)) {
-		if (stats->InvalidCRCCount < 5)
+	if (unlikely(fr_crc != ~crc32(~0, skb->data, fr_len))) {
+		stats = per_cpu_ptr(lport->stats, get_cpu());
+		crc_err = (stats->InvalidCRCCount++);
+		put_cpu();
+		if (crc_err < 5)
 			printk(KERN_WARNING PFX "dropping frame with "
 			       "CRC error\n");
-		stats->InvalidCRCCount++;
 		kfree_skb(skb);
 		return;
 	}

From: Dai Ngo <[email protected]>

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

o The server has not recorded an unconfirmed { v, x, c, *, * } and has recorded a confirmed { v, x, c, *, s }. If the principals of the record and of SETCLIENTID_CONFIRM do not match, the server returns NFS4ERR_CLID_INUSE without removing any relevant leased client state, and without changing recorded callback and callback_ident values for client { x }.

The current code intends to do what the spec describes above but it forgot to set 'old' to NULL resulting to the confirmed client to be expired.

---
 fs/nfsd/nfs4state.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -3941,8 +3941,10 @@ nfsd4_setclientid_confirm(struct svc_rqs
 			status = nfserr_clid_inuse;
 			if (client_has_state(old)
 					&& !same_creds(&unconf->cl_cred,
-							&old->cl_cred))
+							&old->cl_cred)) {
+				old = NULL;
 				goto out;
+			}
 			status = mark_client_expired_locked(old);
 			if (status) {
 				old = NULL;

From: Muhammad Usama Anjum <[email protected]>

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.

---
 tools/testing/selftests/futex/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -11,7 +11,7 @@ all:
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 		if [ -e $$DIR/$(TEST_PROGS) ]; then \
 			rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \
 		fi \

@@ -32,6 +32,6 @@ override define CLEAN
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 	done
 endef

From: Riwen Lu <[email protected]>

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070, reading it returns 1970. Evaluate century starting from 19 to count the correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00

---
 drivers/rtc/rtc-mc146818-lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -83,7 +83,7 @@ unsigned int mc146818_get_time(struct rt
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century > 20)
+	if (century > 19)
 		time->tm_year += (century - 19) * 100;
 
 	/*

From: Sergey Shtylyov <[email protected]>

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards.

[ bp: Massage commit message. ]

---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -349,7 +349,7 @@ static int altr_sdram_probe(struct platf
 	if (irq < 0) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No irq %d in DT\n", irq);
-		return -ENODEV;
+		return irq;
 	}
 
 	/* Arria10 has a 2nd IRQ */

From: Sergey Shtylyov <[email protected]>

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional() to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards.

[ bp: Massage commit message. ]

---
 drivers/edac/xgene_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1922,7 +1922,7 @@ static int xgene_edac_probe(struct platf
 			irq = platform_get_irq(pdev, i);
 			if (irq < 0) {
 				dev_err(&pdev->dev, "No IRQ resource\n");
-				rc = -EINVAL;
+				rc = irq;
 				goto out_err;
 			}
 			rc = devm_request_irq(&pdev->dev, irq,

From: Ritesh Harjani <[email protected]>

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed.

<log snip>

[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
213 void *buffer, loff_t pos, unsigned int len)
214 {
<...>
223 BUG_ON(!EXT4_I(inode)->i_inline_off);
224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

---
 fs/ext4/inline.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -1120,7 +1120,15 @@ static void ext4_restore_inline_data(han
 				     struct ext4_iloc *iloc,
 				     void *buf, int inline_size)
 {
-	ext4_create_inline_data(handle, inode, inline_size);
+	int ret;
+
+	ret = ext4_create_inline_data(handle, inode, inline_size);
+	if (ret) {
+		ext4_msg(inode->i_sb, KERN_EMERG,
+			"error restoring inline_data for inode -- potential data loss! (inode %lu, error %d)",
+			inode->i_ino, ret);
+		return;
+	}
 	ext4_write_inline_data(inode, iloc, buf, 0, inline_size);
 	ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 }

From: Waiman Long <[email protected]>

commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream.

It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment.

---
 kernel/cgroup/cpuset.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -1473,10 +1473,15 @@ static void update_sibling_cpumasks(stru
 	struct cpuset *sibling;
 	struct cgroup_subsys_state *pos_css;
 
+	percpu_rwsem_assert_held(&cpuset_rwsem);
+
 	/*
 	 * Check all its siblings and call update_cpumasks_hier()
 	 * if their use_parent_ecpus flag is set in order for them
 	 * to use the right effective_cpus value.
+	 *
+	 * The update_cpumasks_hier() function may sleep. So we have to
+	 * release the RCU read lock before calling it.
 	 */
 	rcu_read_lock();
 	cpuset_for_each_child(sibling, pos_css, parent) {

@@ -1484,8 +1489,13 @@ static void update_sibling_cpumasks(stru
 			continue;
 		if (!sibling->use_parent_ecpus)
 			continue;
+		if (!css_tryget_online(&sibling->css))
+			continue;
 
+		rcu_read_unlock();
 		update_cpumasks_hier(sibling, tmp);
+		rcu_read_lock();
+		css_put(&sibling->css);
 	}
 	rcu_read_unlock();
 }

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Florian

Compiled and booted 5.4.178-rc1 on my x86_64 test system successfully without errors or regressions.

Thanks,
Slade

Build results:

	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 449 pass: 449 fail: 0

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.4.178-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: 3836147e31ee95815758c97dc5c319423774464d
* git describe: v5.4.177-45-g3836147e31ee
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.177-45-g3836147e31ee

## Test Regressions (compared to v5.4.177)
No test regressions found.

## Metric Regressions (compared to v5.4.177)
No metric regressions found.

## Test Fixes (compared to v5.4.177)
No test fixes found.

## Metric Fixes (compared to v5.4.177)
No metric fixes found.

## Test result summary
total: 92667, pass: 77078, fail: 737, skip: 13409, xfail: 1443

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 257 total, 257 passed, 0 failed
* arm64: 36 total, 31 passed, 5 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 36 total, 36 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kselftest[
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

All tests passing for Tegra ...

Test results for stable-v5.4:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version: 5.4.178-rc1-g3836147e31ee
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

Hi Greg,

Build test:
mips (gcc version 11.2.1 20220121): 65 configs -> no new failure arm (gcc version 11.2.1 20220121): 107 configs -> no new failure arm64 (gcc version 11.2.1 20220121): 2 configs -> no failure x86_64 (gcc version 11.2.1 20220121): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/723

--
Regards
Sudip

Tested on arm64 and x86 for 5.4.178-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.178-rc1
Commit: 3836147e31ee95815758c97dc5c319423774464d
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9009
passed: 9009
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9009
passed: 9009
failed: 0
timeout: 0
--------------------------------------------------------------------