Skip to contentSkip to conversation

dt-bindings: convert ata/cortina,gemini-sata-bridge to yaml

PATCH Superseded Corentin Labbe 2 participants 2 messages Feb 10, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 dt-bindings: convert ata/cortina,gemini-sata-bridge to yaml

This patch converts ata/cortina,gemini-sata-bridge binding to yaml

---
Change since v1:
- fixed cosmetic nits reported by Damien Le Moal Changes since v2:
- Added blank lines between properties
- Removed useless quotes and label
- Re-indented description
Change since v3:
- fixed all min/maxitems reported by Krzysztof Kozlowski

 .../ata/cortina,gemini-sata-bridge.txt        |  55 ---------
 .../ata/cortina,gemini-sata-bridge.yaml       | 109 ++++++++++++++++++
 2 files changed, 109 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
 create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt deleted +0 -55
deleted file mode 100644
index 1c3d3cc70051..000000000000
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file +109 -0

109 lines not on this page · raw message

Signature · 1 line
2.34.1
Reviewed-by on v4 1/1
#1 lore raw
Quoted 123 lines · Corentin Labbe

This patch converts ata/cortina,gemini-sata-bridge binding to yaml

---
Change since v1:
- fixed cosmetic nits reported by Damien Le Moal Changes since v2:
- Added blank lines between properties
- Removed useless quotes and label
- Re-indented description
Change since v3:
- fixed all min/maxitems reported by Krzysztof Kozlowski

 .../ata/cortina,gemini-sata-bridge.txt        |  55 ---------
 .../ata/cortina,gemini-sata-bridge.yaml       | 109 ++++++++++++++++++
 2 files changed, 109 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
 create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt deleted +0 -55
deleted file mode 100644
index 1c3d3cc70051..000000000000
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file +35 -0
new file mode 100644
index 000000000000..77af2559b097
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <[email protected]>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    minItems: 2
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    minItems: 2

Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml line 45

Quoted 10 lines
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file +10 -0
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    maxItems: 1

My bad, I am sorry for misleading you earlier, this is just a phandle, so should be without any min/maxItems.

Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml line 48

Quoted 3 lines
Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file +3 -0
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+

With maxItems removed:

Best regards,
Krzysztof