enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk
cover enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk
I was only able to test it on a 8MNANOD3L-EVK board. Please help testing this change on the other 2 eval boards (8MNANOLPD4-EVK, 8MNANOD4-EVK).
Heiko Thiery (2):
ARM: imx: imx8mn-evk: enable DM_SERIAL
ARM: imx: imx8mn-ddr4-evk: enable DM_SERIAL
configs/imx8mn_ddr4_evk_defconfig | 2 ++ configs/imx8mn_evk_defconfig | 2 ++ 2 files changed, 4 insertions(+)
Signature · 1 line
2.30.2
PATCH 1/2 ARM: imx: imx8mn-evk: enable DM_SERIAL
--- configs/imx8mn_evk_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/imx8mn_evk_defconfig +2 -0
@@ -84,6 +84,8 @@ CONFIG_DM_REGULATOR=y CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y
Signature · 1 line
2.30.2
Fabio Estevam
reviewerRe: [PATCH 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL
Hi Heiko,
Quoted 2 lines · Heiko Thiery
Signed-off-by Heiko Thiery <[email protected]>
Please provide a commit log explaining why you are doing this change.
Thanks
PATCH 2/2 ARM: imx: imx8mn-ddr4-evk: enable DM_SERIAL
In reply to Heiko Thiery--- configs/imx8mn_ddr4_evk_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/imx8mn_ddr4_evk_defconfig +2 -0
@@ -77,6 +77,8 @@ CONFIG_PINCTRL_IMX8M=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +# CONFIG_SPL_DM_SERIAL is not set CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y
Signature · 1 line
2.30.2
Quoted 2 lines · Heiko Thiery
I was only able to test it on a 8MNANOD3L-EVK board. Please help testing this change on the other 2 eval boards (8MNANOLPD4-EVK, 8MNANOD4-EVK).
SPL not use DM_SERIAL, only U-Boot proper use DM_SERIAL, right?
Not related to your patch, I think we need add some low level debug uart setup to have uart work as early as possible, especially for bring up new SoC/board.
Thanks,
Peng.
Quoted 9 lines
Heiko Thiery (2):
ARM: imx: imx8mn-evk: enableDM_SERIAL
ARM: imx: imx8mn-ddr4-evk: enableDM_SERIALconfigs/imx8mn_ddr4_evk_defconfig | 2 ++ configs/imx8mn_evk_defconfig | 2 ++ 2 files changed, 4 insertions(+)
Hi Peng,
Am Mo., 21. März 2022 um 04:07 Uhr schrieb Peng Fan (OSS) <[email protected]>:
Quoted 8 lines · Heiko Thiery
Quoted 2 lines
I was only able to test it on a 8MNANOD3L-EVK board. Please help testing this change on the other 2 eval boards (8MNANOLPD4-EVK, 8MNANOD4-EVK).
SPL not use
DM_SERIAL, only U-Boot proper useDM_SERIAL, right?
Yes only U-Boot uses DM_SERIAL.
Quoted 16 lines
Not related to your patch, I think we need add some low level debug uart setup to have uart work as early as possible, especially for bring up new SoC/board.
Thanks,
Peng.Quoted 9 lines
Heiko Thiery (2):
ARM: imx: imx8mn-evk: enableDM_SERIAL
ARM: imx: imx8mn-ddr4-evk: enableDM_SERIALconfigs/imx8mn_ddr4_evk_defconfig | 2 ++ configs/imx8mn_evk_defconfig | 2 ++ 2 files changed, 4 insertions(+)
Signature · 1 line
Heiko