ARM: mvebu: x530: clearfog: Add ODT configuration
PATCH 1/1 ARM: mvebu: x530: clearfog: Add ODT configuration
Commit 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration") added the odt_config member to struct mv_ddr_topology_map ahead of the clk_enable and ck_delay members. This means that any boards that configured either of clk_enable or ck_delay needed to have their board topology updated. This affects the x530 and clearfog boards. Other A38x boards don't touch any of the trailing members of mv_ddr_topology_map so don't need updating.
---
board/alliedtelesis/x530/x530.c | 1 + board/solidrun/clearfog/clearfog.c | 1 + 2 files changed, 2 insertions(+)
board/alliedtelesis/x530/x530.c +1 -0
@@ -73,6 +73,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0}, /* electrical parameters */ + 0, /* ODT configuration */ 0, /* Clock enable mask */ 160 /* Clock delay */ };
board/solidrun/clearfog/clearfog.c +1 -0
@@ -147,6 +147,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0,}, /* electrical parameters */ + 0, /* ODT configuration */ 0x3, /* clock enable mask */ };
Signature · 1 line
2.35.1
Hi Chris,
Quoted 10 lines · Chris Packham
Commit
369e532691e0("ddr: marvell: a38x: allow board specific ODT configuration") added theodt_configmember to structmv_ddr_topology_mapahead of theclk_enableandck_delaymembers. This means that any boards that configured either ofclk_enableorck_delayneeded to have their board topology updated. This affects the x530 and clearfog boards. Other A38x boards don't touch any of the trailing members ofmv_ddr_topology_mapso don't need updating.Fixes 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration")Signed-off-by Chris Packham <[email protected]>
Thanks,
baruch
Quoted 29 lines
---
board/alliedtelesis/x530/x530.c | 1 + board/solidrun/clearfog/clearfog.c | 1 + 2 files changed, 2 insertions(+)board/alliedtelesis/x530/x530.c +1
-0@@ -73,6 +73,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0}, /* electrical parameters */ + 0, /* ODT configuration */ 0, /* Clock enable mask */ 160 /* Clock delay */ };board/solidrun/clearfog/clearfog.c +1
-0@@ -147,6 +147,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0,}, /* electrical parameters */ + 0, /* ODT configuration */ 0x3, /* clock enable mask */ };
Signature · 3 lines
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.52.368.4656, http://www.tkos.co.il -Quoted 10 lines · Chris Packham
Commit
369e532691e0("ddr: marvell: a38x: allow board specific ODT configuration") added theodt_configmember to structmv_ddr_topology_mapahead of theclk_enableandck_delaymembers. This means that any boards that configured either ofclk_enableorck_delayneeded to have their board topology updated. This affects the x530 and clearfog boards. Other A38x boards don't touch any of the trailing members ofmv_ddr_topology_mapso don't need updating.Fixes 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration")Signed-off-by Chris Packham <[email protected]>
Thanks,
Stefan
Quoted 23 lines
---
board/alliedtelesis/x530/x530.c | 1 + board/solidrun/clearfog/clearfog.c | 1 + 2 files changed, 2 insertions(+)board/alliedtelesis/x530/x530.c +1
-0@@ -73,6 +73,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0}, /* electrical parameters */ + 0, /* ODT configuration */ 0, /* Clock enable mask */ 160 /* Clock delay */ };board/solidrun/clearfog/clearfog.c +0
-0
board/solidrun/clearfog/clearfog.c static struct mv_ddr_topology_map board_topology_map = { · line 153
Quoted 7 lines
board/solidrun/clearfog/clearfog.c +1
-0@@ -147,6 +147,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0,}, /* electrical parameters */ + 0, /* ODT configuration */ 0x3, /* clock enable mask */ };
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 10 lines · Chris Packham
Commit
369e532691e0("ddr: marvell: a38x: allow board specific ODT configuration") added theodt_configmember to structmv_ddr_topology_mapahead of theclk_enableandck_delaymembers. This means that any boards that configured either ofclk_enableorck_delayneeded to have their board topology updated. This affects the x530 and clearfog boards. Other A38x boards don't touch any of the trailing members ofmv_ddr_topology_mapso don't need updating.Fixes 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration")Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan
Quoted 23 lines
---
board/alliedtelesis/x530/x530.c | 1 + board/solidrun/clearfog/clearfog.c | 1 + 2 files changed, 2 insertions(+)board/alliedtelesis/x530/x530.c +1
-0@@ -73,6 +73,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0}, /* electrical parameters */ + 0, /* ODT configuration */ 0, /* Clock enable mask */ 160 /* Clock delay */ };board/solidrun/clearfog/clearfog.c +0
-0
board/solidrun/clearfog/clearfog.c static struct mv_ddr_topology_map board_topology_map = { · line 153
Quoted 7 lines
board/solidrun/clearfog/clearfog.c +1
-0@@ -147,6 +147,7 @@ static struct mv_ddr_topology_map board_topology_map = { {0}, /* timing parameters */ { {0} }, /* electrical configuration */ {0,}, /* electrical parameters */ + 0, /* ODT configuration */ 0x3, /* clock enable mask */ };
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]