Fix broken PCIe device after migration
v2 cover Fix broken PCIe device after migration
Changelog:
v2:
* instead of disabling power control on slot and letting ACPI PCI hotplug module in guest to deal with it, set PCI_EXP_SLTCTL_PWR_ON on PCIe slot from acpi_pcihp_device_plug_cb() when a device plugged into it.
Currently ACPI PCI hotplug is enabled by default for Q35 machine type and overrides native PCIe hotplug. It works as expected when a PCIe device is hotplugged into slot, however the device becomes in-operational after migration. Which is caused by BARs being disabled on target due to powered off status of the slot.
Proposed fix turns on power on PCIe slot when a device is hotplugged into it, then that state is migrated and device stays powred on after migration.
Tested with (seabios: FC34, Win2012; ovmf: RHEL8)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2053584
CC: [email protected]
CC: [email protected]
Ref to v1:
https://lore.kernel.org/all/[email protected]/T/
Gitlab link:
https://gitlab.com/imammedo/qemu/-/tree/pcie_poweroff_acpi_regression_rhbz2053584_V2
Igor Mammedov (3):
pci: expose TYPE_XIO3130_DOWNSTREAM name
acpi: pcihp: pcie: set power on cap on parent slot
q35: compat: keep hotplugged PCIe device broken after migration for
6.2 and older machine types
include/hw/acpi/pcihp.h | 1 + include/hw/pci-bridge/xio3130_downstream.h | 15 +++++++++++++++ include/hw/pci/pcie.h | 1 + hw/acpi/ich9.c | 20 ++++++++++++++++++++ hw/acpi/pcihp.c | 15 ++++++++++++++- hw/core/machine.c | 4 +++- hw/pci-bridge/xio3130_downstream.c | 3 ++- hw/pci/pcie.c | 11 +++++++++++ 8 files changed, 67 insertions(+), 3 deletions(-) create mode 100644 include/hw/pci-bridge/xio3130_downstream.h
Signature · 1 line
2.31.1
PATCH v2 1/3 pci: expose TYPE_XIO3130_DOWNSTREAM name
Type name will be used in followup patch for cast check in pcihp code.
--- include/hw/pci-bridge/xio3130_downstream.h | 15 +++++++++++++++ hw/pci-bridge/xio3130_downstream.c | 3 ++- 2 files changed, 17 insertions(+), 1 deletion(-) create mode 100644 include/hw/pci-bridge/xio3130_downstream.h
include/hw/pci-bridge/xio3130_downstream.h new file +15 -0
@@ -0,0 +1,15 @@ +/* +* TI X3130 pci express downstream port switch +* +* Copyright (C) 2022 Igor Mammedov <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef HW_PCI_BRIDGE_XIO3130_DOWNSTREAM_H +#define HW_PCI_BRIDGE_XIO3130_DOWNSTREAM_H + +#define TYPE_XIO3130_DOWNSTREAM "xio3130-downstream" + +#endif +
hw/pci-bridge/xio3130_downstream.c +2 -1
@@ -28,6 +28,7 @@#include "migration/vmstate.h" #include "qapi/error.h" #include "qemu/module.h" +#include "hw/pci-bridge/xio3130_downstream.h" #define PCI_DEVICE_ID_TI_XIO3130D 0x8233/* downstream port */ #define XIO3130_REVISION 0x1
@@ -173,7 +174,7 @@ static void xio3130_downstream_class_init(ObjectClass *klass, void *data) }static const TypeInfo xio3130_downstream_info = { - .name ="xio3130-downstream" , + .name =TYPE_XIO3130_DOWNSTREAM , .parent =TYPE_PCIE_SLOT , .class_init = xio3130_downstream_class_init, .interfaces = (InterfaceInfo []) {
Signature · 1 line
2.31.1
PATCH v2 2/3 acpi: pcihp: pcie: set power on cap on parent slot
In reply to Igor Mammedovon creation a PCIDevice has power turned on at the end of pci_qdev_realize() however later on if PCIe slot isn't populated with any children it's power is turned off. It's fine if native hotplug is used
as plug callback will power slot on among other things.
However when ACPI hotplug is enabled it replaces native PCIe plug callbacks with ACPI specific ones (acpi_pcihp_device_*plug_cb) and as result slot stays powered off. It works fine as ACPI hotplug on guest side takes care of enumerating/initializing hotplugged device. But when later guest is migrated, call chain introduced by] commit d5daff7d312 (pcie: implement slot power control for pcie root ports)
pcie_cap_slot_post_load()
-> pcie_cap_update_power()
-> pcie_set_power_device()
-> pci_set_power()
-> pci_update_mappings()will disable earlier initialized BARs for the hotplugged device in powered off slot due to commit 23786d13441 (pci: implement power state) which disables BARs if power is off.
Fix it by setting PCI_EXP_SLTCTL_PCC to PCI_EXP_SLTCTL_PWR_ON on slot (root port/downstream port) at the time a device hotplugged into it. As result PCI_EXP_SLTCTL_PWR_ON is migrated to target and above call chain keeps device plugged into it powered on.
--- include/hw/pci/pcie.h | 1 + hw/acpi/pcihp.c | 12 +++++++++++- hw/pci/pcie.c | 11 +++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-)
include/hw/pci/pcie.h +1 -0
@@ -112,6 +112,7 @@ void pcie_cap_slot_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len);int pcie_cap_slot_post_load (void *opaque,int version_id);void pcie_cap_slot_push_attention_button (PCIDevice *dev); +void pcie_cap_slot_enable_power (PCIDevice *dev);void pcie_cap_root_init (PCIDevice *dev);void pcie_cap_root_reset (PCIDevice *dev);
hw/acpi/pcihp.c +11 -1
@@ -32,6 +32,7 @@#include "hw/pci/pci_bridge.h" #include "hw/pci/pci_host.h" #include "hw/pci/pcie_port.h" +#include "hw/pci-bridge/xio3130_downstream.h" #include "hw/i386/acpi-build.h" #include "hw/acpi/acpi.h" #include "hw/pci/pci_bus.h"
@@ -336,6 +337,8 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s, {PCIDevice *pdev =PCI_DEVICE (dev);int slot =PCI_SLOT (pdev->devfn); +PCIDevice *bridge; +PCIBus *bus;int bsel;/* Don't send event when device is enabled during qemu machine creation:
@@ -365,7 +368,14 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s,return ; } - bsel =acpi_pcihp_get_bsel (pci_get_bus (pdev)); + bus =pci_get_bus (pdev); + bridge =pci_bridge_get_device (bus); +if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || +object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { +pcie_cap_slot_enable_power (bridge); + } + + bsel =acpi_pcihp_get_bsel (bus);g_assert (bsel >=0 ); s->acpi_pcihp_pci_status[bsel].up |= (1U << slot);acpi_send_event (DEVICE (hotplug_dev),ACPI_PCI_HOTPLUG_STATUS );
hw/pci/pcie.c +11 -0
@@ -366,6 +366,17 @@ static void hotplug_event_clear(PCIDevice *dev) } } +void pcie_cap_slot_enable_power (PCIDevice *dev) +{ +uint8_t *exp_cap = dev->config + dev->exp.exp_cap; +uint32_t sltcap =pci_get_long (exp_cap +PCI_EXP_SLTCAP ); + +if (sltcap &PCI_EXP_SLTCAP_PCP ) { +pci_set_word_by_mask (exp_cap +PCI_EXP_SLTCTL , +PCI_EXP_SLTCTL_PCC ,PCI_EXP_SLTCTL_PWR_ON ); + } +} +static void pcie_set_power_device (PCIBus *bus,PCIDevice *dev,void *opaque) {bool *power = opaque;
Signature · 1 line
2.31.1
PATCH v2 3/3 q35: compat: keep hotplugged PCIe device broken after migration for 6.2 and older machine types
In reply to Igor MammedovQ35 switched to ACPI PCI hotplug by default in since 6.1 machine type and migration worked as expected (with BARs on target being the same as on source)
However native PCIe fixes [1] merged in 6.2 time, regressed migration part, resulting in disabled BARs on target. The issue affects pc-q35-6.2 and pc-q35-6.1 machine types (and older if qemu-6.2 binary is used on source with manually enabled ACPI PCI hotplug).
Introduce x-pcihp-disable-pcie-slot-power-on-fixup compat property to keep 6.2 and older machine types in broken state when ACPI PCI hotplug is enabled to make sure that guest does see the same PCIe device and slot on src & dst.
1)
--- include/hw/acpi/pcihp.h | 1 + hw/acpi/ich9.c | 20 ++++++++++++++++++++ hw/acpi/pcihp.c | 11 +++++++---- hw/core/machine.c | 4 +++- 4 files changed, 31 insertions(+), 5 deletions(-)
include/hw/acpi/pcihp.h +1 -0
@@ -52,6 +52,7 @@ typedef struct AcpiPciHpState {bool legacy_piix;uint16_t io_base;uint16_t io_len; +bool disable_pcie_slot_power_on_fixup; } AcpiPciHpState; void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root,
hw/acpi/ich9.c +20 -0
@@ -430,6 +430,23 @@ static void ich9_pm_set_keep_pci_slot_hpc(Object *obj, bool value, Error **errp) s->pm.keep_pci_slot_hpc = value; } +static bool ich9_pm_get_disable_pcie_slot_power_on_fixup (Object *obj, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + +return s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup; +} + +static void ich9_pm_set_disable_pcie_slot_power_on_fixup (Object *obj, +bool value, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + + s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup = value; +} +void ich9_pm_add_properties (Object *obj,ICH9LPCPMRegs *pm) {static const uint32_t gpe0_len =ICH9_PMIO_GPE0_LEN ;
@@ -469,6 +486,9 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm)object_property_add_bool (obj,"x-keep-pci-slot-hpc" , ich9_pm_get_keep_pci_slot_hpc, ich9_pm_set_keep_pci_slot_hpc); +object_property_add_bool (obj,"x-pcihp-disable-pcie-slot-power-on-fixup" , + ich9_pm_get_disable_pcie_slot_power_on_fixup, + ich9_pm_set_disable_pcie_slot_power_on_fixup); } void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
hw/acpi/pcihp.c +7 -4
@@ -369,10 +369,13 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s, } bus =pci_get_bus (pdev); - bridge =pci_bridge_get_device (bus); -if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || -object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { -pcie_cap_slot_enable_power (bridge); +/* compat knob to preserve pci_config as in 6.2 & older when pcihp in use */ +if (s->disable_pcie_slot_power_on_fixup == false) { + bridge =pci_bridge_get_device (bus); +if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || +object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { +pcie_cap_slot_enable_power (bridge); + } } bsel =acpi_pcihp_get_bsel (bus);
hw/core/machine.c +3 -1
@@ -37,7 +37,9 @@#include "hw/virtio/virtio.h" #include "hw/virtio/virtio-pci.h" -GlobalProperty hw_compat_6_2[] = {}; +GlobalProperty hw_compat_6_2[] = { + {"ICH9-LPC" ,"x-pcihp-disable-pcie-slot-power-on-fixup" ,"on" }, +};const size_t hw_compat_6_2_len =G_N_ELEMENTS (hw_compat_6_2);GlobalProperty hw_compat_6_1[] = {
Signature · 1 line
2.31.1
Re: [PATCH v2 3/3] q35: compat: keep hotplugged PCIe device broken after migration for 6.2 and older machine types
Quoted 10 lines · Igor Mammedov
Q35 switched to ACPI PCI hotplug by default in since 6.1 machine type and migration worked as expected (with BARs on target being the same as on source)
However native PCIe fixes [1] merged in 6.2 time, regressed migration part, resulting in disabled BARs on target. The issue affects pc-q35-6.2 and pc-q35-6.1 machine types (and older if qemu-6.2 binary is used on source with manually enabled ACPI PCI hotplug).
Quoted 8 lines
Introduce x-pcihp-disable-pcie-slot-power-on-fixup compat property to keep 6.2 and older machine types in broken state when ACPI PCI hotplug is enabled to make sure that guest does see the same PCIe device and slot on src & dst.
1)
Fixes d5daff7d312 (pcie: implement slot power control for pcie root ports)Signed-off-by Igor Mammedov <[email protected]>
I am not sure why we need this one. What's the scenario that's broken otherwise?
Quoted 96 lines
--- include/hw/acpi/pcihp.h | 1 + hw/acpi/ich9.c | 20 ++++++++++++++++++++ hw/acpi/pcihp.c | 11 +++++++---- hw/core/machine.c | 4 +++- 4 files changed, 31 insertions(+), 5 deletions(-)include/hw/acpi/pcihp.h +1
-0@@ -52,6 +52,7 @@ typedef struct AcpiPciHpState {bool legacy_piix;uint16_t io_base;uint16_t io_len; +bool disable_pcie_slot_power_on_fixup; } AcpiPciHpState; void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root,hw/acpi/ich9.c +20
-0@@ -430,6 +430,23 @@ static void ich9_pm_set_keep_pci_slot_hpc(Object *obj, bool value, Error **errp) s->pm.keep_pci_slot_hpc = value; } +static bool ich9_pm_get_disable_pcie_slot_power_on_fixup (Object *obj, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + +return s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup; +} + +static void ich9_pm_set_disable_pcie_slot_power_on_fixup (Object *obj, +bool value, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + + s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup = value; +} +void ich9_pm_add_properties (Object *obj,ICH9LPCPMRegs *pm) {static const uint32_t gpe0_len =ICH9_PMIO_GPE0_LEN ;@@ -469,6 +486,9 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm)object_property_add_bool (obj,"x-keep-pci-slot-hpc" , ich9_pm_get_keep_pci_slot_hpc, ich9_pm_set_keep_pci_slot_hpc); +object_property_add_bool (obj,"x-pcihp-disable-pcie-slot-power-on-fixup" , + ich9_pm_get_disable_pcie_slot_power_on_fixup, + ich9_pm_set_disable_pcie_slot_power_on_fixup); } void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,hw/acpi/pcihp.c +7
-4@@ -369,10 +369,13 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s, } bus =pci_get_bus (pdev); - bridge =pci_bridge_get_device (bus); -if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || -object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { -pcie_cap_slot_enable_power (bridge); +/* compat knob to preserve pci_config as in 6.2 & older when pcihp in use */ +if (s->disable_pcie_slot_power_on_fixup == false) { + bridge =pci_bridge_get_device (bus); +if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || +object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { +pcie_cap_slot_enable_power (bridge); + } } bsel =acpi_pcihp_get_bsel (bus);hw/core/machine.c +3
-1@@ -37,7 +37,9 @@#include "hw/virtio/virtio.h" #include "hw/virtio/virtio-pci.h" -GlobalProperty hw_compat_6_2[] = {}; +GlobalProperty hw_compat_6_2[] = { + {"ICH9-LPC" ,"x-pcihp-disable-pcie-slot-power-on-fixup" ,"on" }, +};const size_t hw_compat_6_2_len =G_N_ELEMENTS (hw_compat_6_2);GlobalProperty hw_compat_6_1[] = {Signature · 1 line
2.31.1
Re: [PATCH v2 3/3] q35: compat: keep hotplugged PCIe device broken after migration for 6.2 and older machine types
Quoted 16 lines · On Tue, 1 Mar 2022 10:20:06 -0500 "Michael S. Tsirkin" <[email protected]> wrote:
Quoted 15 lines · Igor Mammedov
Q35 switched to ACPI PCI hotplug by default in since 6.1 machine type and migration worked as expected (with BARs on target being the same as on source)
However native PCIe fixes [1] merged in 6.2 time, regressed migration part, resulting in disabled BARs on target. The issue affects pc-q35-6.2 and pc-q35-6.1 machine types (and older if qemu-6.2 binary is used on source with manually enabled ACPI PCI hotplug).
Introduce x-pcihp-disable-pcie-slot-power-on-fixup compat property to keep 6.2 and older machine types in broken state when ACPI PCI hotplug is enabled to make sure that guest does see the same PCIe device and slot on src & dst.
Quoted 6 lines
Quoted 3 lines
1)
Fixes d5daff7d312 (pcie: implement slot power control for pcie root ports)Signed-off-by Igor Mammedov <[email protected]>I am not sure why we need this one. What's the scenario that's broken otherwise?
Probably none (but I won't bet on it) beside user confusion where device sometimes works and sometimes don't for 6.1-6.2 machine types depending on whether source runs qemu-6.2 or not.
Guest also will observe PCI_EXP_SLTCTL_PCC flip depending on source QEMU version, but it shouldn't use it anyways since slot is under control of ACPI CPI hotplug module.
Feel free to drop this patch if you think it's overkill.
Quoted 99 lines
Quoted 98 lines
--- include/hw/acpi/pcihp.h | 1 + hw/acpi/ich9.c | 20 ++++++++++++++++++++ hw/acpi/pcihp.c | 11 +++++++---- hw/core/machine.c | 4 +++- 4 files changed, 31 insertions(+), 5 deletions(-)include/hw/acpi/pcihp.h +1
-0@@ -52,6 +52,7 @@ typedef struct AcpiPciHpState {bool legacy_piix;uint16_t io_base;uint16_t io_len; +bool disable_pcie_slot_power_on_fixup; } AcpiPciHpState; void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root,hw/acpi/ich9.c +20
-0@@ -430,6 +430,23 @@ static void ich9_pm_set_keep_pci_slot_hpc(Object *obj, bool value, Error **errp) s->pm.keep_pci_slot_hpc = value; } +static bool ich9_pm_get_disable_pcie_slot_power_on_fixup (Object *obj, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + +return s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup; +} + +static void ich9_pm_set_disable_pcie_slot_power_on_fixup (Object *obj, +bool value, +Error **errp) +{ +ICH9LPCState *s =ICH9_LPC_DEVICE (obj); + + s->pm.acpi_pci_hotplug.disable_pcie_slot_power_on_fixup = value; +} +void ich9_pm_add_properties (Object *obj,ICH9LPCPMRegs *pm) {static const uint32_t gpe0_len =ICH9_PMIO_GPE0_LEN ;@@ -469,6 +486,9 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm)object_property_add_bool (obj,"x-keep-pci-slot-hpc" , ich9_pm_get_keep_pci_slot_hpc, ich9_pm_set_keep_pci_slot_hpc); +object_property_add_bool (obj,"x-pcihp-disable-pcie-slot-power-on-fixup" , + ich9_pm_get_disable_pcie_slot_power_on_fixup, + ich9_pm_set_disable_pcie_slot_power_on_fixup); } void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,hw/acpi/pcihp.c +7
-4@@ -369,10 +369,13 @@ void acpi_pcihp_device_plug_cb(HotplugHandler *hotplug_dev, AcpiPciHpState *s, } bus =pci_get_bus (pdev); - bridge =pci_bridge_get_device (bus); -if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || -object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { -pcie_cap_slot_enable_power (bridge); +/* compat knob to preserve pci_config as in 6.2 & older when pcihp in use */ +if (s->disable_pcie_slot_power_on_fixup == false) { + bridge =pci_bridge_get_device (bus); +if (object_dynamic_cast (OBJECT (bridge),TYPE_PCIE_ROOT_PORT ) || +object_dynamic_cast (OBJECT (bridge),TYPE_XIO3130_DOWNSTREAM )) { +pcie_cap_slot_enable_power (bridge); + } } bsel =acpi_pcihp_get_bsel (bus);hw/core/machine.c +3
-1@@ -37,7 +37,9 @@#include "hw/virtio/virtio.h" #include "hw/virtio/virtio-pci.h" -GlobalProperty hw_compat_6_2[] = {}; +GlobalProperty hw_compat_6_2[] = { + {"ICH9-LPC" ,"x-pcihp-disable-pcie-slot-power-on-fixup" ,"on" }, +};const size_t hw_compat_6_2_len =G_N_ELEMENTS (hw_compat_6_2);GlobalProperty hw_compat_6_1[] = {Signature · 1 line
2.31.1
Quoted 13 lines · Igor Mammedov
Changelog:
v2:
* instead of disabling power control on slot and letting ACPI PCI hotplug module in guest to deal with it, setPCI_EXP_SLTCTL_PWR_ONon PCIe slot fromacpi_pcihp_device_plug_cb()when a device plugged into it.Currently ACPI PCI hotplug is enabled by default for Q35 machine type and overrides native PCIe hotplug. It works as expected when a PCIe device is hotplugged into slot, however the device becomes in-operational after migration. Which is caused by BARs being disabled on target due to powered off status of the slot.
Quoted 3 lines
Proposed fix turns on power on PCIe slot when a device is hotplugged into it, then that state is migrated and device stays powred on after migration.
Looks good for 1-2. Some questions on 3.
Thanks!
Quoted 30 lines
Tested with (seabios: FC34, Win2012; ovmf: RHEL8)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2053584
CC: [email protected]
CC: [email protected]Ref to v1:
https://lore.kernel.org/all/[email protected]/T/
Gitlab link:
https://gitlab.com/imammedo/qemu/-/tree/pcie_poweroff_acpi_regression_rhbz2053584_V2Igor Mammedov (3):
pci: exposeTYPE_XIO3130_DOWNSTREAMname
acpi: pcihp: pcie: set power on cap on parent slot
q35: compat: keep hotplugged PCIe device broken after migration for
6.2 and older machine typesinclude/hw/acpi/pcihp.h | 1 + include/hw/pci-bridge/xio3130_downstream.h | 15 +++++++++++++++ include/hw/pci/pcie.h | 1 + hw/acpi/ich9.c | 20 ++++++++++++++++++++ hw/acpi/pcihp.c | 15 ++++++++++++++- hw/core/machine.c | 4 +++- hw/pci-bridge/xio3130_downstream.c | 3 ++- hw/pci/pcie.c | 11 +++++++++++ 8 files changed, 67 insertions(+), 3 deletions(-) create mode 100644 include/hw/pci-bridge/xio3130_downstream.hSignature · 1 line
2.31.1