Skip to contentSkip to conversation

xFrom e2ebdef7c3a5e7ba998ff20bf62806c388efeaac Mon Sep 17 00:00:00 2001

PATCH RESEND Superseded Ilkka Koskinen 2 participants 5 messages Mar 4, 2022 – Mar 9, 2022

Subsystems (2)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

Hi Lorenzo,

Would you prefer this version, which doesn't have platform device/driver any more?

--Ilkka

----

Arm Generic Diagnostic Dump and Reset device enables a maintainer to request OS to perform a diagnostic dump and reset a system via SDEI event or an interrupt. This patchset adds support for the SDEI path.

I do have a patch to enable the interrupt path as well but I'm holding it back since AGDI table is missing interrupt configuration fields (trigger type etc.).

The recently published specification is available at
https://developer.arm.com/documentation/den0093/latest

The patchset was tested on Ampere Altra/Mt. Jade.

The patchset applies on top of
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm bleeding-edge (9db71e8e3027)

I also tested it works on top of Shuai Xue's new patches in bleeding-edge branch (c6f4ba2d2b9a)

From v1:
* Moved pdata to the stack and dropped unnecessary kzalloc() in agdi_init()
* Changed the ACPICA patch upstreaming order comment in the paragraph above

From v2:
* The first patch was split. The most of it was merged to ACPICA project at first and later ported to linux-acpi (fd919e37cb15914c6fe13e13d530a4f732407c6d). The rest are in the first patch.

From v3:
Fixed:
* Moved header files in alphabetical order and removed unnecessary ones

From v4:
* Platform device/driver stuff removed
* acpi_agdi_init() call moved from device_initcall to acpi_init()
* Slightly modified Kconfig text to keep checkpatch happy

Ilkka Koskinen (2):
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: AGDI: Add support for Arm Generic Diagnostic Dump and Reset
device

 drivers/acpi/arm64/Kconfig  | 10 +++++++
 drivers/acpi/arm64/Makefile |  1 +
 drivers/acpi/arm64/agdi.c   | 52 +++++++++++++++++++++++++++++++++++++
 drivers/acpi/bus.c          |  2 ++
 drivers/acpi/tables.c       |  2 +-
 include/linux/acpi_agdi.h   | 13 ++++++++++
 6 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 drivers/acpi/arm64/agdi.c
 create mode 100644 include/linux/acpi_agdi.h
Signature · 1 line
2.17.1
#1 lore raw

PATCH RESEND v5 1/2 ACPI: tables: Add AGDI to the list of known table signatures

Add AGDI to the list of known ACPI table signatures to allow the kernel to recognize it when upgrading tables via initrd.

---
 drivers/acpi/tables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/tables.c +1 -1
index 369eb998c3d1..ceee808f7f2a 100644
@@ -545,7 +545,7 @@ static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst = {
 	ACPI_SIG_WDDT, ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT,
 	ACPI_SIG_PSDT, ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT,
 	ACPI_SIG_IORT, ACPI_SIG_NFIT, ACPI_SIG_HMAT, ACPI_SIG_PPTT,
-	ACPI_SIG_NHLT, ACPI_SIG_AEST, ACPI_SIG_CEDT };
+	ACPI_SIG_NHLT, ACPI_SIG_AEST, ACPI_SIG_CEDT, ACPI_SIG_AGDI };
 
 #define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
 
Signature · 1 line
2.17.1
#2 lore raw

PATCH RESEND v5 2/2 ACPI: AGDI: Add support for Arm Generic Diagnostic Dump and Reset device

In reply to Ilkka Koskinen

ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to issue diagnostic dump and reset via an SDEI event or an interrupt. This patch implements SDEI path.

[0] https://developer.arm.com/documentation/den0093/latest/

---
 drivers/acpi/arm64/Kconfig  | 10 +++++++
 drivers/acpi/arm64/Makefile |  1 +
 drivers/acpi/arm64/agdi.c   | 52 +++++++++++++++++++++++++++++++++++++
 drivers/acpi/bus.c          |  2 ++
 include/linux/acpi_agdi.h   | 13 ++++++++++
 5 files changed, 78 insertions(+)
 create mode 100644 drivers/acpi/arm64/agdi.c
 create mode 100644 include/linux/acpi_agdi.h
drivers/acpi/arm64/Kconfig +10 -0
index 6dba187f4f2e..d4a72835f328 100644
@@ -8,3 +8,13 @@ config ACPI_IORT
 
 config ACPI_GTDT
 	bool
+
+config ACPI_AGDI
+	bool "Arm Generic Diagnostic Dump and Reset Device Interface"
+	depends on ARM_SDE_INTERFACE
+	help
+	  Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is
+	  a standard that enables issuing a non-maskable diagnostic dump and
+	  reset command.
+
+	  If set, the kernel parses AGDI table and listens for the command.
drivers/acpi/arm64/Makefile +1 -0
index 66acbe77f46e..7b9e4045659d 100644
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ACPI_AGDI) 	+= agdi.o
 obj-$(CONFIG_ACPI_IORT) 	+= iort.o
 obj-$(CONFIG_ACPI_GTDT) 	+= gtdt.o
 obj-y				+= dma.o
drivers/acpi/arm64/agdi.c new file +52 -0

52 lines not on this page · raw message

drivers/acpi/bus.c +2 -0
index eaa511fc9c66..87b93f4df0cf 100644
@@ -26,6 +26,7 @@
 #include <asm/mpspec.h>
 #include <linux/dmi.h>
 #endif
+#include <linux/acpi_agdi.h>
 #include <linux/acpi_iort.h>
 #include <linux/acpi_viot.h>
 #include <linux/pci.h>
@@ -1386,6 +1387,7 @@ static int __init acpi_init(void)
 	acpi_debugger_init();
 	acpi_setup_sb_notify_handler();
 	acpi_viot_init();
+	acpi_agdi_init();
 	return 0;
 }
 
include/linux/acpi_agdi.h new file +13 -0
new file mode 100644
index 000000000000..f477f0b452fa
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ACPI_AGDI_H__
+#define __ACPI_AGDI_H__
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_ACPI_AGDI
+void __init acpi_agdi_init(void);
+#else
+static inline void acpi_agdi_init(void) {}
+#endif
+#endif /* __ACPI_AGDI_H__ */
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH v5 RESEND 2/2] ACPI: AGDI: Add support for Arm Generic Diagnostic Dump and Reset device

Thank you for the patch! Perhaps something to improve:

Hi Ilkka,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on rafael-pm/linux-next]
[also build test WARNING on next-20220308]
[cannot apply to v5.17-rc7]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Ilkka-Koskinen/ACPI-tables-Add-AGDI-to-the-list-of-known-table-signatures/20220304-142317
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220309/[email protected]/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/004555056c85ab479f5f0ec4ffb80ab8c0619881
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Ilkka-Koskinen/ACPI-tables-Add-AGDI-to-the-list-of-known-table-signatures/20220304-142317 git checkout 004555056c85ab479f5f0ec4ffb80ab8c0619881
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/acpi/arm64/

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

>> drivers/acpi/arm64/agdi.c:22:13: warning: no previous prototype for 'acpi_agdi_init' [-Wmissing-prototypes]

22 | void __init acpi_agdi_init(void)
| ^~~~~~~~~~~~~~

vim +/acpi_agdi_init +22 drivers/acpi/arm64/agdi.c

    21	
  > 22	void __init acpi_agdi_init(void)

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]

#4 lore raw
In reply to Ilkka Koskinen

Sorry about the mess. I'll resubmit the patch set.

Quoted 66 lines · Ilkka Koskinen

Hi Lorenzo,

Would you prefer this version, which doesn't have platform device/driver any more?

--Ilkka

----

Arm Generic Diagnostic Dump and Reset device enables a maintainer to request OS to perform a diagnostic dump and reset a system via SDEI event or an interrupt. This patchset adds support for the SDEI path.

I do have a patch to enable the interrupt path as well but I'm holding it back since AGDI table is missing interrupt configuration fields (trigger type etc.).

The recently published specification is available at
https://developer.arm.com/documentation/den0093/latest

The patchset was tested on Ampere Altra/Mt. Jade.

The patchset applies on top of
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm bleeding-edge (9db71e8e3027)

I also tested it works on top of Shuai Xue's new patches in bleeding-edge branch (c6f4ba2d2b9a)

From v1:
* Moved pdata to the stack and dropped unnecessary kzalloc() in agdi_init()
* Changed the ACPICA patch upstreaming order comment in the paragraph above

From v2:
* The first patch was split. The most of it was merged to ACPICA project at first and later ported to linux-acpi (fd919e37cb15914c6fe13e13d530a4f732407c6d). The rest are in the first patch.

From v3:
Fixed:
* Moved header files in alphabetical order and removed unnecessary ones

From v4:
* Platform device/driver stuff removed
* acpi_agdi_init() call moved from device_initcall to acpi_init()
* Slightly modified Kconfig text to keep checkpatch happy

Ilkka Koskinen (2):
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: AGDI: Add support for Arm Generic Diagnostic Dump and Reset
device

drivers/acpi/arm64/Kconfig  | 10 +++++++
drivers/acpi/arm64/Makefile |  1 +
drivers/acpi/arm64/agdi.c   | 52 +++++++++++++++++++++++++++++++++++++
drivers/acpi/bus.c          |  2 ++
drivers/acpi/tables.c       |  2 +-
include/linux/acpi_agdi.h   | 13 ++++++++++
6 files changed, 79 insertions(+), 1 deletion(-)

create mode 100644 drivers/acpi/arm64/agdi.c
create mode 100644 include/linux/acpi_agdi.h

Signature · 1 line
2.17.1