Add support for Imagis touchscreens
Subsystems (4)
Markuss Broks
maintainerv10 cover Add support for Imagis touchscreens
Add support for Imagis touchscreens, used on various mobile devices such as Samsung Galaxy J5 (2015), J3 (2015), J5 (2016).
v2: rebase on top of the correct tree
v3:
- prefix all defines as IST3038C
- use two tabs for all defines
- add missing <linux/regulator/consumer.h> header
- drop ADDR_LEN and DATA_LEN defines; use sizeof(reg_be) instead
- use __be32 type for reg_be
- add a comment about i2c read not being successful on first try
- use "ret" instead of "res" in read_reg function
- don't use the internal __cpu_to_be32 function, use cpu_to_be32 instead
- use "error" instead of "ret" in interrupt handler
- pass the slot state directly, without ternary operator
- drop the dev_err in init_input_dev function
- reorder the functions in _probe so that the chipid command is read as fast as possible
- don't use imagis_start in probe
- initialize the irq after the chip is powered
- save the return value in imagis_resume
- drop WIDTH_MAJOR since only TOUCH_MAJOR is reported
- the "chip detected" message is now dev_dbg
- reorder headers so they are in alphabetic order
- use GENMASK to generate masks for getting the X and Y coordinates and touch area
- drop *_pressure from device tree bindings since the driver doesn't support reporting pressure
- fix the typo with i2c address in device treee bindings (48 instead of 50)
- add IRQF_NO_AUTOEN flag to avoid unbalanced irq enable
v4:
- alphabetically order MAINTAINERS entry
- alphabetically order Kconfig and Makefile
- drop the error message in init_regulators
- disable regulators on probe error
- drop IRQF_TRIGGER_FALLING
- @ is not optional (device tree bindings)
- don't use items for compatible
- add maxItems property to reg, drop the comment
v5:
- compatible enum is not an item of the list, drop "-"
v6:
- add _MS suffix to the delay define, drop the comment
- change the reason for retry comment
- add imagis_power_off and imagis_power_on functions to turn regulators on and off
- use imagis_power_on/off in imagis_start and imagis_stop as well as in probe function
- use error instead of ret in calls to functions which only return 0 or -errno
- include linux/bits.h
- proper indentation in Kconfig
- drop the dev_dbg chip id message
- MODULE_DEVICE_TABLE(of, ...);
- no extra tabs in i2c_driver struct
- save the return value in imagis_suspend
v7:
- initialize ret with 0 in _suspend and _resume (kernel test robot)
- use a separate ret_be variable to avoid casting to __be32 (kernel test robot) v8:
- use poweroff action
- power_off returns void
- ret -> error
- combine dev declaration and assignment
- use same style for error everywhere
- return devm_regulator_bulk_get() directly
v9:
- don't return in power_off (forgot to commit)
v10:
- check for error before sleeping
- duplicate msleep in imagis_start
- return 0 since error can only be 0 in imagis_start
- move poweroff action below imagis_power_off
Markuss Broks (2):
dt-bindings: input/touchscreen: bindings for Imagis
Input: add Imagis touchscreen driver
.../input/touchscreen/imagis,ist3038c.yaml | 74 ++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 6 + drivers/input/touchscreen/Kconfig | 10 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/imagis.c | 348 ++++++++++++++++++ 6 files changed, 441 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml create mode 100644 drivers/input/touchscreen/imagis.c
Signature · 1 line
2.20.1
Markuss Broks
maintainerPATCH v10 1/2 dt-bindings: input/touchscreen: bindings for Imagis
This patch adds device-tree bindings for the Imagis IST3038C touch screen IC.
--- .../input/touchscreen/imagis,ist3038c.yaml | 74 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml new file +74 -0
@@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagis IST30XXC family touchscreen controller bindings + +maintainers: + - Markuss Broks <[email protected]> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen@[0-9a-f]+$" + + compatible: + enum: + - imagis,ist3038c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@50 { + compatible = "imagis,ist3038c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo1_reg>; + vddio-supply = <&ldo2_reg>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + touchscreen-fuzz-x = <10>; + touchscreen-fuzz-y = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + }; + +...
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -560,6 +560,8 @@ patternProperties: description: Ingenieurburo Fur Ic-Technologie (I/F/I) "^ilitek,.*": description: ILI Technology Corporation (ILITEK) + "^imagis,.*": + description: Imagis Technologies Co., Ltd. "^img,.*": description: Imagination Technologies Ltd. "^imi,.*":
Signature · 1 line
2.20.1
Markuss Broks
maintainerPATCH v10 2/2 Input: add Imagis touchscreen driver
In reply to Markuss BroksAdd support for the IST3038C touchscreen IC from Imagis, based on downstream driver. The driver supports multi-touch (10 touch points) The IST3038C IC supports touch keys, but the support isn't added because the touch screen used for testing doesn't utilize touch keys. Looking at the downstream driver, it is possible to add support for other Imagis ICs of IST30**C series.
--- MAINTAINERS | 6 + drivers/input/touchscreen/Kconfig | 10 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/imagis.c | 332 +++++++++++++++++++++++++++++ 4 files changed, 349 insertions(+) create mode 100644 drivers/input/touchscreen/imagis.c
MAINTAINERS +6 -0
@@ -9509,6 +9509,12 @@ M: Stanislaw Gruszka <[email protected]> S: Maintained F: drivers/usb/atm/ueagle-atm.c +IMAGIS TOUCHSCREEN DRIVER +M: Markuss Broks <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +F: drivers/input/touchscreen/imagis.c + IMGTEC ASCII LCD DRIVER M: Paul Burton <[email protected]> S: Maintained
drivers/input/touchscreen/Kconfig +10 -0
@@ -638,6 +638,16 @@ config TOUCHSCREEN_MTOUCH To compile this driver as a module, choose M here: the module will be called mtouch. +config TOUCHSCREEN_IMAGIS + tristate "Imagis touchscreen support" + depends on I2C + help + Say Y here if you have an Imagis IST30xxC touchscreen. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called imagis. + config TOUCHSCREEN_IMX6UL_TSC tristate "Freescale i.MX6UL touchscreen controller" depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
drivers/input/touchscreen/Makefile +1 -0
@@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o +obj-$(CONFIG_TOUCHSCREEN_IMAGIS) += imagis.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
drivers/input/touchscreen/imagis.c new file +332 -0
332 lines not on this page · raw message
Signature · 1 line
2.20.1