Add SCM and mailbox support on MSM8976
Subsystems (3)
v2 cover Add SCM and mailbox support on MSM8976
This patch series adds support for SCM and mailbox as found on the QCOM MSM8976 platform.
Changes since v1
================
1. Fixed formatting of patches(lacking empty line before Sob).
Adam Skladowski (4):
dt-bindings: mailbox: Add compatible for the MSM8976
mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
firmware: qcom_scm: Add compatible for MSM8976 SoC
Documentation/devicetree/bindings/firmware/qcom,scm.txt | 3 ++- .../devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 + drivers/firmware/qcom_scm.c | 4 ++++ drivers/mailbox/qcom-apcs-ipc-mailbox.c | 1 + 4 files changed, 8 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
PATCH v2 1/4 dt-bindings: mailbox: Add compatible for the MSM8976
Add the mailbox compatible for the MSM8976 SoC.
--- .../devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +1 -0
@@ -21,6 +21,7 @@ properties: - qcom,msm8916-apcs-kpss-global - qcom,msm8939-apcs-kpss-global - qcom,msm8953-apcs-kpss-global + - qcom,msm8976-apcs-kpss-global - qcom,msm8994-apcs-kpss-global - qcom,msm8996-apcs-hmss-global - qcom,msm8998-apcs-hmss-global
Signature · 1 line
2.25.1
PATCH v2 2/4 mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC
In reply to Adam SkladowskiMSM8976 APCS block is similar to one found in MSM8994.
--- drivers/mailbox/qcom-apcs-ipc-mailbox.c | 1 + 1 file changed, 1 insertion(+)
drivers/mailbox/qcom-apcs-ipc-mailbox.c +1 -0
@@ -146,6 +146,7 @@ static const struct of_device_id qcom_apcs_ipc_of_match[] = { { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8976-apcs-kpss-global", .data = &msm8994_apcs_data }, { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data }, { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data }, { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8994_apcs_data },
Signature · 1 line
2.25.1
PATCH v2 3/4 dt-bindings: firmware: qcom-scm: Document msm8976 bindings
In reply to Adam SkladowskiSCM driver on MSM8976 requires 3 clocks.
--- Documentation/devicetree/bindings/firmware/qcom,scm.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/firmware/qcom,scm.txt +2 -1
@@ -19,6 +19,7 @@ Required properties: * "qcom,scm-msm8953" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8976" * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998"
@@ -37,7 +38,7 @@ Required properties: * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and "qcom,scm-msm8960" * core, iface and bus clocks required for "qcom,scm-apq8084", - "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974" + "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the
Signature · 1 line
2.25.1
PATCH v2 4/4 firmware: qcom_scm: Add compatible for MSM8976 SoC
In reply to Adam SkladowskiAdd compatible for SCM on MSM8976.
--- drivers/firmware/qcom_scm.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/firmware/qcom_scm.c +4 -0
@@ -1379,6 +1379,10 @@ static const struct of_device_id qcom_scm_dt_match[] = {SCM_HAS_IFACE_CLK | SCM_HAS_BUS_CLK) }, + { .compatible = "qcom,scm-msm8976", .data = (void *)(SCM_HAS_CORE_CLK | +SCM_HAS_IFACE_CLK | +SCM_HAS_BUS_CLK ) + }, { .compatible = "qcom,scm-msm8994" }, { .compatible = "qcom,scm-msm8996" }, { .compatible = "qcom,scm" },
Signature · 1 line
2.25.1