Skip to contentSkip to conversation

Add support for sam9x60_curiosity

PATCH In review Durai Manickam KR 2 participants 7 messages Mar 21, 2022 – Mar 22, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Add support for sam9x60_curiosity

This patch series adds support for sam9x60_curiosity.

Durai Manickam KR (4):
board: Add sam9x60_curiosity support
ARM: dts: Add device tree files for sam9x60_curiosity
configs: Add sam9x60_curiosity_mmc_defconfig
configs: Add sam9x60_curiosity_nandflash_defconfig

 arch/arm/dts/Makefile                         |   2 +
 .../dts/at91-sam9x60_curiosity-u-boot.dtsi    |  79 ++++++++++
 arch/arm/dts/at91-sam9x60_curiosity.dts       |  74 ++++++++++
 arch/arm/mach-at91/Kconfig                    |  10 ++
 board/atmel/sam9x60_curiosity/Kconfig         |  15 ++
 board/atmel/sam9x60_curiosity/MAINTAINERS     |   8 +
 board/atmel/sam9x60_curiosity/Makefile        |   7 +
 .../sam9x60_curiosity/sam9x60_curiosity.c     | 139 ++++++++++++++++++
 configs/sam9x60_curiosity_mmc_defconfig       |  82 +++++++++++
 configs/sam9x60_curiosity_nandflash_defconfig |  82 +++++++++++
 include/configs/sam9x60_curiosity.h           |  67 +++++++++
 11 files changed, 565 insertions(+)
 create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
 create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
 create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
 create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
 create mode 100644 board/atmel/sam9x60_curiosity/Makefile
 create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
 create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
 create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
 create mode 100644 include/configs/sam9x60_curiosity.h
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/4 board: Add sam9x60_curiosity support

Add board files, Kconfig, Makefile and MAINTAINERS.

---
 arch/arm/mach-at91/Kconfig                    |  10 ++
 board/atmel/sam9x60_curiosity/Kconfig         |  15 ++
 board/atmel/sam9x60_curiosity/MAINTAINERS     |   6 +
 board/atmel/sam9x60_curiosity/Makefile        |   7 +
 .../sam9x60_curiosity/sam9x60_curiosity.c     | 139 ++++++++++++++++++
 include/configs/sam9x60_curiosity.h           |  67 +++++++++
 6 files changed, 244 insertions(+)
 create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
 create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
 create mode 100644 board/atmel/sam9x60_curiosity/Makefile
 create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
 create mode 100644 include/configs/sam9x60_curiosity.h
arch/arm/mach-at91/Kconfig +10 -0
index 00f31045d6..7a1dbff069 100644
@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
 	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 
+config TARGET_SAM9X60_CURIOSITY
+        bool "SAM9X60 CURIOSITY board"
+        select SAM9X60
+        select BOARD_EARLY_INIT_F
+        select BOARD_LATE_INIT
+
 config TARGET_SAMA5D2_PTC_EK
 	bool "SAMA5D2 PTC EK board"
 	select BOARD_EARLY_INIT_F
@@ -310,6 +316,9 @@ config AT91_EFLASH
 	  Enable the driver for the embedded flash used in the Atmel
 	  AT91SAM9XE devices.
 
+config ATMEL_LEGACY
+	bool "Legacy GPIO support"
+
 source "board/atmel/at91sam9260ek/Kconfig"
 source "board/atmel/at91sam9261ek/Kconfig"
 source "board/atmel/at91sam9263ek/Kconfig"
@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
 source "board/atmel/at91sam9rlek/Kconfig"
 source "board/atmel/at91sam9x5ek/Kconfig"
 source "board/atmel/sam9x60ek/Kconfig"
+source "board/atmel/sam9x60_curiosity/Kconfig"
 source "board/atmel/sama7g5ek/Kconfig"
 source "board/atmel/sama5d2_ptc_ek/Kconfig"
 source "board/atmel/sama5d2_xplained/Kconfig"
board/atmel/sam9x60_curiosity/Kconfig new file +15 -0
new file mode 100644
index 0000000000..ae84e0f32c
@@ -0,0 +1,15 @@
+if TARGET_SAM9X60_CURIOSITY
+
+config SYS_BOARD
+	default "sam9x60_curiosity"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+        default "at91"
+
+config SYS_CONFIG_NAME
+	default "sam9x60_curiosity"
+
+endif
board/atmel/sam9x60_curiosity/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..84a3a9f186
@@ -0,0 +1,6 @@
+SAM9X60 CURIOSITY BOARD
+M:	Durai Manickam KR <[email protected]>
+M:	Eugen Hristev <[email protected]>
+S:	Maintained
+F:	board/atmel/sam9x60_curiosity/
+F:	include/configs/sam9x60_curiosity.h
board/atmel/sam9x60_curiosity/Makefile new file +7 -0
new file mode 100644
index 0000000000..c4d17e66d4
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+#
+# Author: Durai Manickam KR <[email protected]>
+
+obj-y += sam9x60_curiosity.o
board/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139 -0

139 lines not on this page · raw message

include/configs/sam9x60_curiosity.h new file +67 -0

67 lines not on this page · raw message

Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH 1/4] board: Add sam9x60_curiosity support

Quoted 35 lines · Durai Manickam KR

Add board files, Kconfig, Makefile and MAINTAINERS.

---
  arch/arm/mach-at91/Kconfig                    |  10 ++
  board/atmel/sam9x60_curiosity/Kconfig         |  15 ++
  board/atmel/sam9x60_curiosity/MAINTAINERS     |   6 +
  board/atmel/sam9x60_curiosity/Makefile        |   7 +
  .../sam9x60_curiosity/sam9x60_curiosity.c     | 139 ++++++++++++++++++
  include/configs/sam9x60_curiosity.h           |  67 +++++++++
  6 files changed, 244 insertions(+)

create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c create mode 100644 include/configs/sam9x60_curiosity.h

arch/arm/mach-at91/Kconfig +6 -0
index 00f31045d6..7a1dbff069 100644
@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
  	select BOARD_EARLY_INIT_F
  	select BOARD_LATE_INIT
 
+config TARGET_SAM9X60_CURIOSITY
+        bool "SAM9X60 CURIOSITY board"
+        select SAM9X60
+        select BOARD_EARLY_INIT_F
+        select BOARD_LATE_INIT
+
  config TARGET_SAMA5D2_PTC_EK
  	bool "SAMA5D2 PTC EK board"
  	select BOARD_EARLY_INIT_F

arch/arm/mach-at91/Kconfig config AT91_EFLASH · line 321

Quoted 6 lines
arch/arm/mach-at91/Kconfig +3 -0
@@ -310,6 +316,9 @@ config AT91_EFLASH
  	  Enable the driver for the embedded flash used in the Atmel
  	  AT91SAM9XE devices.
 
+config ATMEL_LEGACY
+	bool "Legacy GPIO support"
+

Hello Durai,

ATMEL_LEGACY has been previously converted to Kconfig with this commit :

https://source.denx.de/u-boot/custodians/u-boot-at91/-/commit/cb81640011270dae6346979ef36264a72cf3b565

So please rebase your series on top of u-boot/next or u-boot-at91/next which is created on top of next and includes patches for the next u-boot merge window.

Thank you !

Quoted 276 lines
arch/arm/mach-at91/Kconfig +1 -0
  source "board/atmel/at91sam9260ek/Kconfig"
  source "board/atmel/at91sam9261ek/Kconfig"
  source "board/atmel/at91sam9263ek/Kconfig"
@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
  source "board/atmel/at91sam9rlek/Kconfig"
  source "board/atmel/at91sam9x5ek/Kconfig"
  source "board/atmel/sam9x60ek/Kconfig"
+source "board/atmel/sam9x60_curiosity/Kconfig"
  source "board/atmel/sama7g5ek/Kconfig"
  source "board/atmel/sama5d2_ptc_ek/Kconfig"
  source "board/atmel/sama5d2_xplained/Kconfig"
board/atmel/sam9x60_curiosity/Kconfig new file +15 -0
new file mode 100644
index 0000000000..ae84e0f32c
@@ -0,0 +1,15 @@
+if TARGET_SAM9X60_CURIOSITY
+
+config SYS_BOARD
+	default "sam9x60_curiosity"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+        default "at91"
+
+config SYS_CONFIG_NAME
+	default "sam9x60_curiosity"
+
+endif
board/atmel/sam9x60_curiosity/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..84a3a9f186
@@ -0,0 +1,6 @@
+SAM9X60 CURIOSITY BOARD
+M:	Durai Manickam KR <[email protected]>
+M:	Eugen Hristev <[email protected]>
+S:	Maintained
+F:	board/atmel/sam9x60_curiosity/
+F:	include/configs/sam9x60_curiosity.h
board/atmel/sam9x60_curiosity/Makefile new file +7 -0
new file mode 100644
index 0000000000..c4d17e66d4
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+#
+# Author: Durai Manickam KR <[email protected]>
+
+obj-y += sam9x60_curiosity.o
board/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139 -0
new file mode 100644
index 0000000000..3c5470b03c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <[email protected]>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_sfr.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void at91_prepare_cpu_var(void);
+
+#ifdef CONFIG_CMD_NAND
+static void sam9x60_curiosity_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+	unsigned int csa;
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1);	/* NAND OE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1);	/* NAND WE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* NAND ALE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0);	/* NAND CLE */
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
+
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+	/* Enable CS3 */
+	csa = readl(&sfr->ebicsa);
+	csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
+
+	/* Configure IO drive */
+	csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
+
+	writel(csa, &sfr->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
+
+	writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
+	       AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
+	       &smc->cs[3].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+	       &smc->cs[3].cycle);
+
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
+	       &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	at91_prepare_cpu_var();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+	return 0;
+}
+#endif
+
+#define MAC24AA_MAC_OFFSET     0xfa
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+	at91_set_ethaddr(MAC24AA_MAC_OFFSET);
+#endif
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+	sam9x60_curiosity_nand_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
include/configs/sam9x60_curiosity.h new file +67 -0
new file mode 100644
index 0000000000..4ec380ee54
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the SAM9X60 CURIOSITY board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <[email protected]>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
+
+#define CONFIG_USART_BASE   ATMEL_BASE_DBGU
+#define CONFIG_USART_ID     0 /* ignored in arm */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x8000000	/* 128 MB */
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR         0x218000
+#else
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
+	 GENERATED_GBL_DATA_SIZE)
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE	BIT(21)
+#define CONFIG_SYS_NAND_MASK_CLE	BIT(22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+#ifndef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_SD_BOOT
+/* bootstrap + u-boot + env + linux in sd card */
+#define CONFIG_BOOTCOMMAND	"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \
+				" 0x21000000 at91-sam9x60_curiosity.dtb;" \
+				"fatload mmc " \
+				CONFIG_ENV_FAT_DEVICE_AND_PART \
+				" 0x22000000 zImage;" \
+				"bootz 0x22000000 - 0x21000000"
+#elif defined(CONFIG_NAND_BOOT)
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_BOOTCOMMAND	"nand read " \
+				"0x22000000 0x200000 0x600000; " \
+				"nand read 0x21000000 0x180000 0x20000; " \
+				"bootz 0x22000000 - 0x21000000"
+#else
+#define CONFIG_BOOTCOMMAND      "Place your bootcommand here"
+#endif
+#endif
+
+#endif
#3 lore raw

Re: [PATCH 1/4] board: Add sam9x60_curiosity support

Quoted 47 lines · On 21/03/22 22:02, Eugen Hristev - M18282 wrote:
Quoted 35 lines · Durai Manickam KR

Add board files, Kconfig, Makefile and MAINTAINERS.

---
   arch/arm/mach-at91/Kconfig                    |  10 ++
   board/atmel/sam9x60_curiosity/Kconfig         |  15 ++
   board/atmel/sam9x60_curiosity/MAINTAINERS     |   6 +
   board/atmel/sam9x60_curiosity/Makefile        |   7 +
   .../sam9x60_curiosity/sam9x60_curiosity.c     | 139 ++++++++++++++++++
   include/configs/sam9x60_curiosity.h           |  67 +++++++++
   6 files changed, 244 insertions(+)

create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c create mode 100644 include/configs/sam9x60_curiosity.h

arch/arm/mach-at91/Kconfig +6 -0
index 00f31045d6..7a1dbff069 100644
@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
   	select BOARD_EARLY_INIT_F
   	select BOARD_LATE_INIT
 
+config TARGET_SAM9X60_CURIOSITY
+        bool "SAM9X60 CURIOSITY board"
+        select SAM9X60
+        select BOARD_EARLY_INIT_F
+        select BOARD_LATE_INIT
+
   config TARGET_SAMA5D2_PTC_EK
   	bool "SAMA5D2 PTC EK board"
   	select BOARD_EARLY_INIT_F

arch/arm/mach-at91/Kconfig config AT91_EFLASH · line 321

Quoted 6 lines
arch/arm/mach-at91/Kconfig +3 -0
@@ -310,6 +316,9 @@ config AT91_EFLASH
   	  Enable the driver for the embedded flash used in the Atmel
   	  AT91SAM9XE devices.
 
+config ATMEL_LEGACY
+	bool "Legacy GPIO support"
+

Hello Durai,

ATMEL_LEGACY has been previously converted to Kconfig with this commit :

Quoted 8 lines

https://source.denx.de/u-boot/custodians/u-boot-at91/-/commit/cb81640011270dae6346979ef36264a72cf3b565

So please rebase your series on top of u-boot/next or u-boot-at91/next which is created on top of next and includes patches for the next u-boot merge window.

Thank you !

Hello Eugen,

Thanks, I have sent patches on top of u-boot/next branch.

Quoted 277 lines
Quoted 276 lines
arch/arm/mach-at91/Kconfig +1 -0
   source "board/atmel/at91sam9260ek/Kconfig"
   source "board/atmel/at91sam9261ek/Kconfig"
   source "board/atmel/at91sam9263ek/Kconfig"
@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
   source "board/atmel/at91sam9rlek/Kconfig"
   source "board/atmel/at91sam9x5ek/Kconfig"
   source "board/atmel/sam9x60ek/Kconfig"
+source "board/atmel/sam9x60_curiosity/Kconfig"
   source "board/atmel/sama7g5ek/Kconfig"
   source "board/atmel/sama5d2_ptc_ek/Kconfig"
   source "board/atmel/sama5d2_xplained/Kconfig"
board/atmel/sam9x60_curiosity/Kconfig new file +15 -0
new file mode 100644
index 0000000000..ae84e0f32c
@@ -0,0 +1,15 @@
+if TARGET_SAM9X60_CURIOSITY
+
+config SYS_BOARD
+	default "sam9x60_curiosity"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+        default "at91"
+
+config SYS_CONFIG_NAME
+	default "sam9x60_curiosity"
+
+endif
board/atmel/sam9x60_curiosity/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..84a3a9f186
@@ -0,0 +1,6 @@
+SAM9X60 CURIOSITY BOARD
+M:	Durai Manickam KR <[email protected]>
+M:	Eugen Hristev <[email protected]>
+S:	Maintained
+F:	board/atmel/sam9x60_curiosity/
+F:	include/configs/sam9x60_curiosity.h
board/atmel/sam9x60_curiosity/Makefile new file +7 -0
new file mode 100644
index 0000000000..c4d17e66d4
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+#
+# Author: Durai Manickam KR <[email protected]>
+
+obj-y += sam9x60_curiosity.o
board/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139 -0
new file mode 100644
index 0000000000..3c5470b03c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <[email protected]>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_sfr.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void at91_prepare_cpu_var(void);
+
+#ifdef CONFIG_CMD_NAND
+static void sam9x60_curiosity_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+	unsigned int csa;
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1);	/* NAND OE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1);	/* NAND WE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* NAND ALE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0);	/* NAND CLE */
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
+
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+	/* Enable CS3 */
+	csa = readl(&sfr->ebicsa);
+	csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
+
+	/* Configure IO drive */
+	csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
+
+	writel(csa, &sfr->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
+
+	writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
+	       AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
+	       &smc->cs[3].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+	       &smc->cs[3].cycle);
+
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
+	       &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	at91_prepare_cpu_var();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+	at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+	debug_uart_init();
+#endif
+	return 0;
+}
+#endif
+
+#define MAC24AA_MAC_OFFSET     0xfa
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+	at91_set_ethaddr(MAC24AA_MAC_OFFSET);
+#endif
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+	sam9x60_curiosity_nand_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
include/configs/sam9x60_curiosity.h new file +67 -0
new file mode 100644
index 0000000000..4ec380ee54
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the SAM9X60 CURIOSITY board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <[email protected]>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
+
+#define CONFIG_USART_BASE   ATMEL_BASE_DBGU
+#define CONFIG_USART_ID     0 /* ignored in arm */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x8000000	/* 128 MB */
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR         0x218000
+#else
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
+	 GENERATED_GBL_DATA_SIZE)
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE	BIT(21)
+#define CONFIG_SYS_NAND_MASK_CLE	BIT(22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+#ifndef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_SD_BOOT
+/* bootstrap + u-boot + env + linux in sd card */
+#define CONFIG_BOOTCOMMAND	"fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \
+				" 0x21000000 at91-sam9x60_curiosity.dtb;" \
+				"fatload mmc " \
+				CONFIG_ENV_FAT_DEVICE_AND_PART \
+				" 0x22000000 zImage;" \
+				"bootz 0x22000000 - 0x21000000"
+#elif defined(CONFIG_NAND_BOOT)
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_BOOTCOMMAND	"nand read " \
+				"0x22000000 0x200000 0x600000; " \
+				"nand read 0x21000000 0x180000 0x20000; " \
+				"bootz 0x22000000 - 0x21000000"
+#else
+#define CONFIG_BOOTCOMMAND      "Place your bootcommand here"
+#endif
+#endif
+
+#endif
Signature · 2 lines
Regards,
Durai Manickam KR
#4 lore raw

PATCH 2/4 ARM: dts: Add device tree files for sam9x60_curiosity

In reply to Durai Manickam KR

Add dts and dtsi files.

---
 arch/arm/dts/Makefile                         |  2 +
 .../dts/at91-sam9x60_curiosity-u-boot.dtsi    | 79 +++++++++++++++++++
 arch/arm/dts/at91-sam9x60_curiosity.dts       | 74 +++++++++++++++++
 3 files changed, 155 insertions(+)
 create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
 create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
arch/arm/dts/Makefile +2 -0
index 644ba961a2..fefa612d49 100644
@@ -1006,6 +1006,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
 
 dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
 
+dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb
+
 dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
 
 dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi new file +79 -0

79 lines not on this page · raw message

arch/arm/dts/at91-sam9x60_curiosity.dts new file +74 -0

74 lines not on this page · raw message

Signature · 1 line
2.25.1
#5 lore raw

PATCH 3/4 configs: Add sam9x60_curiosity_mmc_defconfig

In reply to Durai Manickam KR

Add boot from SDMMC (sdcard) support for sam9x60_curiosity.

---
 board/atmel/sam9x60_curiosity/MAINTAINERS |  1 +
 configs/sam9x60_curiosity_mmc_defconfig   | 82 +++++++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
board/atmel/sam9x60_curiosity/MAINTAINERS +1 -0
index 84a3a9f186..3e1dce2980 100644
@@ -4,3 +4,4 @@ M:	Eugen Hristev <[email protected]>
 S:	Maintained
 F:	board/atmel/sam9x60_curiosity/
 F:	include/configs/sam9x60_curiosity.h
+F:	configs/sam9x60_curiosity_mmc_defconfig
configs/sam9x60_curiosity_mmc_defconfig new file +82 -0

82 lines not on this page · raw message

Signature · 1 line
2.25.1
#6 lore raw

PATCH 4/4 configs: Add sam9x60_curiosity_nandflash_defconfig

In reply to Durai Manickam KR

Add boot from NAND flash support for sam9x60_curiosity.

---
 board/atmel/sam9x60_curiosity/MAINTAINERS     |  1 +
 configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
board/atmel/sam9x60_curiosity/MAINTAINERS +1 -0
index 3e1dce2980..63e34cee07 100644
@@ -5,3 +5,4 @@ S:	Maintained
 F:	board/atmel/sam9x60_curiosity/
 F:	include/configs/sam9x60_curiosity.h
 F:	configs/sam9x60_curiosity_mmc_defconfig
+F:	configs/sam9x60_curiosity_nandflash_defconfig
configs/sam9x60_curiosity_nandflash_defconfig new file +82 -0

82 lines not on this page · raw message

Signature · 1 line
2.25.1