Add support for sam9x60_curiosity
cover Add support for sam9x60_curiosity
This patch series adds support for sam9x60_curiosity.
Durai Manickam KR (4):
board: Add sam9x60_curiosity support
ARM: dts: Add device tree files for sam9x60_curiosity
configs: Add sam9x60_curiosity_mmc_defconfig
configs: Add sam9x60_curiosity_nandflash_defconfig
arch/arm/dts/Makefile | 2 + .../dts/at91-sam9x60_curiosity-u-boot.dtsi | 79 ++++++++++ arch/arm/dts/at91-sam9x60_curiosity.dts | 74 ++++++++++ arch/arm/mach-at91/Kconfig | 10 ++ board/atmel/sam9x60_curiosity/Kconfig | 15 ++ board/atmel/sam9x60_curiosity/MAINTAINERS | 8 + board/atmel/sam9x60_curiosity/Makefile | 7 + .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++ configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++ configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++ include/configs/sam9x60_curiosity.h | 67 +++++++++ 11 files changed, 565 insertions(+) create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c create mode 100644 configs/sam9x60_curiosity_mmc_defconfig create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig create mode 100644 include/configs/sam9x60_curiosity.h
Signature · 1 line
2.25.1
PATCH 1/4 board: Add sam9x60_curiosity support
Add board files, Kconfig, Makefile and MAINTAINERS.
--- arch/arm/mach-at91/Kconfig | 10 ++ board/atmel/sam9x60_curiosity/Kconfig | 15 ++ board/atmel/sam9x60_curiosity/MAINTAINERS | 6 + board/atmel/sam9x60_curiosity/Makefile | 7 + .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++ include/configs/sam9x60_curiosity.h | 67 +++++++++ 6 files changed, 244 insertions(+) create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c create mode 100644 include/configs/sam9x60_curiosity.h
arch/arm/mach-at91/Kconfig +10 -0
@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK select BOARD_EARLY_INIT_F select BOARD_LATE_INIT +config TARGET_SAM9X60_CURIOSITY + bool "SAM9X60 CURIOSITY board" + select SAM9X60 + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + config TARGET_SAMA5D2_PTC_EK bool "SAMA5D2 PTC EK board" select BOARD_EARLY_INIT_F
@@ -310,6 +316,9 @@ config AT91_EFLASH Enable the driver for the embedded flash used in the Atmel AT91SAM9XE devices. +config ATMEL_LEGACY + bool "Legacy GPIO support" + source "board/atmel/at91sam9260ek/Kconfig" source "board/atmel/at91sam9261ek/Kconfig" source "board/atmel/at91sam9263ek/Kconfig"
@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig" source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sam9x60ek/Kconfig" +source "board/atmel/sam9x60_curiosity/Kconfig" source "board/atmel/sama7g5ek/Kconfig" source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig"
board/atmel/sam9x60_curiosity/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_SAM9X60_CURIOSITY + +config SYS_BOARD + default "sam9x60_curiosity" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sam9x60_curiosity" + +endif
board/atmel/sam9x60_curiosity/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SAM9X60 CURIOSITY BOARD +M: Durai Manickam KR <[email protected]> +M: Eugen Hristev <[email protected]> +S: Maintained +F: board/atmel/sam9x60_curiosity/ +F: include/configs/sam9x60_curiosity.h
board/atmel/sam9x60_curiosity/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +# +# Author: Durai Manickam KR <[email protected]> + +obj-y += sam9x60_curiosity.o
board/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139 -0
139 lines not on this page · raw message
include/configs/sam9x60_curiosity.h new file +67 -0
67 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 1/4] board: Add sam9x60_curiosity support
Quoted 35 lines · Durai Manickam KR
Add board files,
Kconfig,MakefileandMAINTAINERS.Signed-off-by Durai Manickam KR <[email protected]>--- arch/arm/mach-at91/Kconfig | 10 ++ board/atmel/sam9x60_curiosity/Kconfig | 15 ++ board/atmel/sam9x60_curiosity/MAINTAINERS | 6 + board/atmel/sam9x60_curiosity/Makefile | 7 + .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++ include/configs/sam9x60_curiosity.h | 67 +++++++++ 6 files changed, 244 insertions(+)create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644
board/atmel/sam9x60_curiosity/sam9x60_curiosity.ccreate mode 100644include/configs/sam9x60_curiosity.harch/arm/mach-at91/Kconfig +6
-0@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK select BOARD_EARLY_INIT_F select BOARD_LATE_INIT +config TARGET_SAM9X60_CURIOSITY + bool "SAM9X60 CURIOSITY board" + select SAM9X60 + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + config TARGET_SAMA5D2_PTC_EK bool "SAMA5D2 PTC EK board" select BOARD_EARLY_INIT_F
arch/arm/mach-at91/Kconfig config AT91_EFLASH · line 321
Quoted 6 lines
arch/arm/mach-at91/Kconfig +3
-0@@ -310,6 +316,9 @@ config AT91_EFLASH Enable the driver for the embedded flash used in the Atmel AT91SAM9XE devices. +config ATMEL_LEGACY + bool "Legacy GPIO support" +
Hello Durai,
ATMEL_LEGACY has been previously converted to Kconfig with this commit :
So please rebase your series on top of u-boot/next or u-boot-at91/next which is created on top of next and includes patches for the next u-boot merge window.
Thank you !
Quoted 276 lines
arch/arm/mach-at91/Kconfig +1
-0source "board/atmel/at91sam9260ek/Kconfig" source "board/atmel/at91sam9261ek/Kconfig" source "board/atmel/at91sam9263ek/Kconfig"@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig" source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sam9x60ek/Kconfig" +source "board/atmel/sam9x60_curiosity/Kconfig" source "board/atmel/sama7g5ek/Kconfig" source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig"board/atmel/sam9x60_curiosity/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +if TARGET_SAM9X60_CURIOSITY + +config SYS_BOARD + default "sam9x60_curiosity" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sam9x60_curiosity" + +endifboard/atmel/sam9x60_curiosity/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +SAM9X60 CURIOSITY BOARD +M: Durai Manickam KR <[email protected]> +M: Eugen Hristev <[email protected]> +S: Maintained +F: board/atmel/sam9x60_curiosity/ +F: include/configs/sam9x60_curiosity.hboard/atmel/sam9x60_curiosity/Makefile new file +7
-0@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +# +# Author: Durai Manickam KR <[email protected]> + +obj-y += sam9x60_curiosity.oboard/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139
-0@@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +* +* Author: Durai Manickam KR <[email protected]> +*/ + +#include <common.h> +#include <debug_uart.h> +#include <fdtdec.h> +#include <init.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_sfr.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +DECLARE_GLOBAL_DATA_PTR ; + +void at91_prepare_cpu_var (void ); + +#ifdef CONFIG_CMD_NAND +static void sam9x60_curiosity_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; + unsigned int csa; + + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */ + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); + + at91_periph_clk_enable(ATMEL_ID_PIOD); + + /* Enable CS3 */ + csa = readl(&sfr->ebicsa); + csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16; + + /* Configure IO drive */ + csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60; + + writel(csa, &sfr->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) | + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15), + &smc->cs[3].mode); +} +#endif + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + at91_prepare_cpu_var(); + + return 0; +} +#endif + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + at91_seriald_hw_init(); +} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif + return 0; +} +#endif + +#define MAC24AA_MAC_OFFSET 0xfa + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_I2C_EEPROM + at91_set_ethaddr(MAC24AA_MAC_OFFSET); +#endif + return 0; +} +#endif + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + +#ifdef CONFIG_CMD_NAND + sam9x60_curiosity_nand_hw_init(); +#endif + return 0; +} + +int dram_init_banksize(void) +{ + return fdtdec_setup_memory_banksize(); +} + +int dram_init(void) +{ + return fdtdec_setup_mem_size_base(); +}include/configs/sam9x60_curiosity.h new file +67
-0@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Configuration settings for the SAM9X60 CURIOSITY board. +* +* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +* +* Author: Durai Manickam KR <[email protected]> +*/ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000/* 24 MHz crystal */ + +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID 0/* ignored in arm */ + +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x8000000/* 128 MB */ + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x218000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \ + GENERATED_GBL_DATA_SIZE) +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#endif + +#ifndef CONFIG_BOOTCOMMAND +#ifdef CONFIG_SD_BOOT +/* bootstrap + u-boot + env + linux in sd card */ +#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \ + " 0x21000000 at91-sam9x60_curiosity.dtb;" \ + "fatload mmc " \ + CONFIG_ENV_FAT_DEVICE_AND_PART \ + " 0x22000000 zImage;" \ + "bootz 0x22000000 - 0x21000000" +#elif defined(CONFIG_NAND_BOOT ) +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_BOOTCOMMAND "nand read " \ + "0x22000000 0x200000 0x600000; " \ + "nand read 0x21000000 0x180000 0x20000; " \ + "bootz 0x22000000 - 0x21000000" +#else +#define CONFIG_BOOTCOMMAND "Place your bootcommand here" +#endif +#endif + +#endif
Re: [PATCH 1/4] board: Add sam9x60_curiosity support
Quoted 47 lines · On 21/03/22 22:02, Eugen Hristev - M18282 wrote:
Quoted 35 lines · Durai Manickam KR
Add board files,
Kconfig,MakefileandMAINTAINERS.Signed-off-by Durai Manickam KR <[email protected]>--- arch/arm/mach-at91/Kconfig | 10 ++ board/atmel/sam9x60_curiosity/Kconfig | 15 ++ board/atmel/sam9x60_curiosity/MAINTAINERS | 6 + board/atmel/sam9x60_curiosity/Makefile | 7 + .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++ include/configs/sam9x60_curiosity.h | 67 +++++++++ 6 files changed, 244 insertions(+)create mode 100644 board/atmel/sam9x60_curiosity/Kconfig create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS create mode 100644 board/atmel/sam9x60_curiosity/Makefile create mode 100644
board/atmel/sam9x60_curiosity/sam9x60_curiosity.ccreate mode 100644include/configs/sam9x60_curiosity.harch/arm/mach-at91/Kconfig +6
-0@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK select BOARD_EARLY_INIT_F select BOARD_LATE_INIT +config TARGET_SAM9X60_CURIOSITY + bool "SAM9X60 CURIOSITY board" + select SAM9X60 + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + config TARGET_SAMA5D2_PTC_EK bool "SAMA5D2 PTC EK board" select BOARD_EARLY_INIT_Farch/arm/mach-at91/Kconfig config AT91_EFLASH · line 321
Quoted 6 lines
arch/arm/mach-at91/Kconfig +3
-0@@ -310,6 +316,9 @@ config AT91_EFLASH Enable the driver for the embedded flash used in the Atmel AT91SAM9XE devices. +config ATMEL_LEGACY + bool "Legacy GPIO support" +Hello Durai,
ATMEL_LEGACYhas been previously converted toKconfigwith this commit :
Quoted 8 lines
So please rebase your series on top of u-boot/next or u-boot-at91/next which is created on top of next and includes patches for the next u-boot merge window.
Thank you !
Hello Eugen,
Thanks, I have sent patches on top of u-boot/next branch.
Quoted 277 lines
Quoted 276 lines
arch/arm/mach-at91/Kconfig +1
-0source "board/atmel/at91sam9260ek/Kconfig" source "board/atmel/at91sam9261ek/Kconfig" source "board/atmel/at91sam9263ek/Kconfig"@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig" source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sam9x60ek/Kconfig" +source "board/atmel/sam9x60_curiosity/Kconfig" source "board/atmel/sama7g5ek/Kconfig" source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig"board/atmel/sam9x60_curiosity/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +if TARGET_SAM9X60_CURIOSITY + +config SYS_BOARD + default "sam9x60_curiosity" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sam9x60_curiosity" + +endifboard/atmel/sam9x60_curiosity/MAINTAINERS new file +6
-0@@ -0,0 +1,6 @@ +SAM9X60 CURIOSITY BOARD +M: Durai Manickam KR <[email protected]> +M: Eugen Hristev <[email protected]> +S: Maintained +F: board/atmel/sam9x60_curiosity/ +F: include/configs/sam9x60_curiosity.hboard/atmel/sam9x60_curiosity/Makefile new file +7
-0@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +# +# Author: Durai Manickam KR <[email protected]> + +obj-y += sam9x60_curiosity.oboard/atmel/sam9x60_curiosity/sam9x60_curiosity.c new file +139
-0@@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +* +* Author: Durai Manickam KR <[email protected]> +*/ + +#include <common.h> +#include <debug_uart.h> +#include <fdtdec.h> +#include <init.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_sfr.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +DECLARE_GLOBAL_DATA_PTR ; + +void at91_prepare_cpu_var (void ); + +#ifdef CONFIG_CMD_NAND +static void sam9x60_curiosity_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; + unsigned int csa; + + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */ + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */ + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1); + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); + + at91_periph_clk_enable(ATMEL_ID_PIOD); + + /* Enable CS3 */ + csa = readl(&sfr->ebicsa); + csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16; + + /* Configure IO drive */ + csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60; + + writel(csa, &sfr->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) | + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15), + &smc->cs[3].mode); +} +#endif + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + at91_prepare_cpu_var(); + + return 0; +} +#endif + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + at91_seriald_hw_init(); +} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif + return 0; +} +#endif + +#define MAC24AA_MAC_OFFSET 0xfa + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_I2C_EEPROM + at91_set_ethaddr(MAC24AA_MAC_OFFSET); +#endif + return 0; +} +#endif + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + +#ifdef CONFIG_CMD_NAND + sam9x60_curiosity_nand_hw_init(); +#endif + return 0; +} + +int dram_init_banksize(void) +{ + return fdtdec_setup_memory_banksize(); +} + +int dram_init(void) +{ + return fdtdec_setup_mem_size_base(); +}include/configs/sam9x60_curiosity.h new file +67
-0@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Configuration settings for the SAM9X60 CURIOSITY board. +* +* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +* +* Author: Durai Manickam KR <[email protected]> +*/ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000/* 24 MHz crystal */ + +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID 0/* ignored in arm */ + +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x8000000/* 128 MB */ + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x218000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \ + GENERATED_GBL_DATA_SIZE) +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#endif + +#ifndef CONFIG_BOOTCOMMAND +#ifdef CONFIG_SD_BOOT +/* bootstrap + u-boot + env + linux in sd card */ +#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \ + " 0x21000000 at91-sam9x60_curiosity.dtb;" \ + "fatload mmc " \ + CONFIG_ENV_FAT_DEVICE_AND_PART \ + " 0x22000000 zImage;" \ + "bootz 0x22000000 - 0x21000000" +#elif defined(CONFIG_NAND_BOOT ) +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_BOOTCOMMAND "nand read " \ + "0x22000000 0x200000 0x600000; " \ + "nand read 0x21000000 0x180000 0x20000; " \ + "bootz 0x22000000 - 0x21000000" +#else +#define CONFIG_BOOTCOMMAND "Place your bootcommand here" +#endif +#endif + +#endif
Signature · 2 lines
Regards, Durai Manickam KR
PATCH 2/4 ARM: dts: Add device tree files for sam9x60_curiosity
In reply to Durai Manickam KRAdd dts and dtsi files.
--- arch/arm/dts/Makefile | 2 + .../dts/at91-sam9x60_curiosity-u-boot.dtsi | 79 +++++++++++++++++++ arch/arm/dts/at91-sam9x60_curiosity.dts | 74 +++++++++++++++++ 3 files changed, 155 insertions(+) create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
arch/arm/dts/Makefile +2 -0
@@ -1006,6 +1006,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb +dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb + dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi new file +79 -0
79 lines not on this page · raw message
arch/arm/dts/at91-sam9x60_curiosity.dts new file +74 -0
74 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 3/4 configs: Add sam9x60_curiosity_mmc_defconfig
In reply to Durai Manickam KRAdd boot from SDMMC (sdcard) support for sam9x60_curiosity.
--- board/atmel/sam9x60_curiosity/MAINTAINERS | 1 + configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++++++++++++++ 2 files changed, 83 insertions(+) create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
board/atmel/sam9x60_curiosity/MAINTAINERS +1 -0
@@ -4,3 +4,4 @@ M: Eugen Hristev <[email protected]> S: Maintained F: board/atmel/sam9x60_curiosity/ F: include/configs/sam9x60_curiosity.h +F: configs/sam9x60_curiosity_mmc_defconfig
configs/sam9x60_curiosity_mmc_defconfig new file +82 -0
82 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 4/4 configs: Add sam9x60_curiosity_nandflash_defconfig
In reply to Durai Manickam KRAdd boot from NAND flash support for sam9x60_curiosity.
--- board/atmel/sam9x60_curiosity/MAINTAINERS | 1 + configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++++++++++ 2 files changed, 83 insertions(+) create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
board/atmel/sam9x60_curiosity/MAINTAINERS +1 -0
@@ -5,3 +5,4 @@ S: Maintained F: board/atmel/sam9x60_curiosity/ F: include/configs/sam9x60_curiosity.h F: configs/sam9x60_curiosity_mmc_defconfig +F: configs/sam9x60_curiosity_nandflash_defconfig
configs/sam9x60_curiosity_nandflash_defconfig new file +82 -0
82 lines not on this page · raw message
Signature · 1 line
2.25.1