dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
Subsystems (3)
PATCH v2 1/2 dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
Current dts files with RK3188/RK3066 'cru' nodes are manually verified. In order to automate this process rockchip,rk3188-cru.txt has to be converted to YAML.
Changed:
Add properties to fix notifications by clocks.yaml for example:
clocks
clock-names
---
Changed V2:
change clocks maxItems
add clock-names
use clock-controller node name
remove assigned-xxx
--- .../bindings/clock/rockchip,rk3188-cru.txt | 61 --------------- .../bindings/clock/rockchip,rk3188-cru.yaml | 76 +++++++++++++++++++ 2 files changed, 76 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt deleted +0 -61
@@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - };
Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml new file +76 -0
76 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v2 2/2 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
--- arch/arm/boot/dts/rk3066a.dtsi | 3 ++- arch/arm/boot/dts/rk3188.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
arch/arm/boot/dts/rk3066a.dtsi +2 -1
@@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
arch/arm/boot/dts/rk3188.dtsi +2 -1
@@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; };
Signature · 1 line
2.20.1
Quoted 17 lines · Johan Jonker
Current dts files with RK3188/RK3066 'cru' nodes are manually verified. In order to automate this process rockchip,rk3188-cru.txt has to be converted to YAML.
Changed:
Add properties to fix notifications byclocks.yamlfor example:
clocks
clock-namesSigned-off-by Johan Jonker <[email protected]>---
Changed V2:
change clocks maxItems
add clock-names
use clock-controller node name
remove assigned-xxx
Quoted 7 lines
--- .../bindings/clock/rockchip,rk3188-cru.txt | 61 --------------- .../bindings/clock/rockchip,rk3188-cru.yaml | 76 +++++++++++++++++++ 2 files changed, 76 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
Best regards,
Krzysztof
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip