thermal: k3_j72xx_bandgap: Add the bandgap driver support
Subsystems (3)
v5 cover thermal: k3_j72xx_bandgap: Add the bandgap driver support
Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The series also incorporates workaround for Errata i2128.
Daniel,
Apologies for the long silence on this!
- Keerthy
Changes in v5:
* Fixed all the comments on v4.
* Simplified the computation of the table.
* Removed unnecessary members in the structures.
Changes in v4:
* Fixed compilation warning with W=1.
Changes in v3:
* Removed static look up tables & added functions to dynamically generate them.
Changes in v2:
* Fixed DT binding errors.
Keerthy (4):
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
arm64: dts: ti: j721e: Add VTM node
arm64: dts: ti: j7200: Add VTM node
thermal: k3_j72xx_bandgap: Add the bandgap driver support
.../bindings/thermal/ti,j72xx-thermal.yaml | 62 ++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 + arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 45 ++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 + .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 + arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 73 ++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 + drivers/thermal/Makefile | 2 +- drivers/thermal/k3_j72xx_bandgap.c | 623 ++++++++++++++++++ 9 files changed, 830 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
Signature · 1 line
2.17.1
PATCH v5 1/4 dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
--- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +62 -0
@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + maxItems: 3 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 1 line
2.17.1
Re: [PATCH v5 1/4] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Adding Krzysztof
Quoted 83 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>--- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+)create mode 100644
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +62
-0@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + maxItems: 3 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH v5 1/4] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
In reply to KeerthyQuoted 29 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>--- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +8
-0@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding +
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml line 18
Quoted 10 lines
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +10
-0+maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtm
It seems you resent this ignoring all of Rob's comments. In changelog of cover letter you wrote "Fixed all the comments on v4" but it's not true. Maybe you sent us old patch?
Anyway, you need to follow Rob's comments.
Best regards,
Krzysztof
Re: [PATCH v5 1/4] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Quoted 45 lines · Krzysztof Kozlowski
Quoted 29 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>--- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+)create mode 100644
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +8
-0@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding +Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml line 18
Quoted 10 lines
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +10
-0+maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtmIt seems you resent this ignoring all of Rob's comments. In changelog of cover letter you wrote "Fixed all the comments on v4" but it's not true. Maybe you sent us old patch?
Quoted 1 line
Anyway, you need to follow Rob's comments.
Krzysztof,
Apologies. Some issues with my mailbox. Rob's response didn't reach me for some reason.
I am now seeing them on the web: https://lore.kernel.org/lkml/[email protected]/
It wasn't deliberate to ignore comments. Apologies.
I will fix them in v6.
Thanks for the quick feedback.
- Keerthy
Quoted 4 lines
Best regards,
Krzysztof
Re: [PATCH v5 1/4] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
Quoted 9 lines · KEERTHY
Apologies. Some issues with my mailbox. Rob's response didn't reach me for some reason.
I am now seeing them on the web:
https://lore.kernel.org/lkml/[email protected]/It wasn't deliberate to ignore comments. Apologies.
I will fix them in v6.
Sure :)
Best regards,
Krzysztof
Rob Herring
maintainerRe: [PATCH v5 1/4] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
In reply to J, KEERTHYQuoted 48 lines · KEERTHY
Quoted 45 lines · Krzysztof Kozlowski
Quoted 29 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>--- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+)create mode 100644
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +8
-0@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding +Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml line 18
Quoted 10 lines
Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file +10
-0+maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtmIt seems you resent this ignoring all of Rob's comments. In changelog of cover letter you wrote "Fixed all the comments on v4" but it's not true. Maybe you sent us old patch?
Quoted 6 lines
Quoted 1 line
Anyway, you need to follow Rob's comments.
Krzysztof,
Apologies. Some issues with my mailbox. Rob's response didn't reach me for some reason.
Maybe because I'm still banned by TI. Just had another bounce a few days ago.
Rob
PATCH v5 2/4 arm64: dts: ti: j721e: Add VTM node
In reply to KeerthyVTM stands for Voltage Thermal Management
--- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 73 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 + 3 files changed, 86 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +9 -0
@@ -418,4 +418,13 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x0 0x42040000 0x0 0x350>, + <0x0 0x42050000 0x0 0x350>, + <0x0 0x43000300 0x0 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; };
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +73 -0
73 lines not on this page · raw message
arch/arm64/boot/dts/ti/k3-j721e.dtsi +4 -0
@@ -181,6 +181,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + thermal_zones: thermal-zones { + #include "k3-j721e-thermal.dtsi" + }; }; /* Now include the peripherals for each bus segments */
Signature · 1 line
2.17.1
Vignesh Raghavendra
maintainerRe: [PATCH v5 2/4] arm64: dts: ti: j721e: Add VTM node
Hi Keerthy
Quoted 15 lines · Keerthy
VTM stands for Voltage Thermal Management
Signed-off-by Keerthy <[email protected]>--- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 73 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 + 3 files changed, 86 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsiarch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +0
-0
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi line 426
Quoted 9 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +6
-0@@ -418,4 +418,13 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x0 0x42040000 0x0 0x350>, + <0x0 0x42050000 0x0 0x350>, + <0x0 0x43000300 0x0 0x10>;
Please follow convention of using 0x00 as rest of the file:
reg = <0x00 0x42040000 0x00 0x350>, ....
Quoted 11 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +3
-0+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; };arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +1
-0@@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi line 11
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +10
-0+ +#include <dt-bindings/thermal/thermal.h> + +wkup_thermal: wkup_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup_crit {
Here and elsewhere no "-" in node names please.
You can use:
https://github.com/nmenon/kernel_patch_verify
kpv -C -n <no of commits>
This catches most issues like above
Quoted 67 lines
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +62
-0+ temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu_thermal: mpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +c7x_thermal: c7x_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +gpu_thermal: gpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + gpu_crit: gpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +r5f_thermal: r5f_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + r5f_crit: r5f_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +};arch/arm64/boot/dts/ti/k3-j721e.dtsi +0
-0
arch/arm64/boot/dts/ti/k3-j721e.dtsi line 187
Quoted 7 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi +4
-0@@ -181,6 +181,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + thermal_zones: thermal-zones { + #include "k3-j721e-thermal.dtsi" + };
Bit weird representation, any reason why thermal-zones {} cannot be moved into k3-j721e-thermal.dtsi?
arch/arm64/boot/dts/ti/k3-j721e.dtsi line 190
Quoted 3 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi +0
-0}; /* Now include the peripherals for each bus segments */
Regards
Vignesh
Re: [PATCH v5 2/4] arm64: dts: ti: j721e: Add VTM node
Quoted 13 lines · Vignesh Raghavendra
Hi Keerthy
Quoted 10 lines · Keerthy
VTM stands for Voltage Thermal Management
Signed-off-by Keerthy <[email protected]>--- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 73 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 + 3 files changed, 86 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
Quoted 16 lines
Quoted 5 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +0
-0arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi line 426
Quoted 9 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +6
-0@@ -418,4 +418,13 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x0 0x42040000 0x0 0x350>, + <0x0 0x42050000 0x0 0x350>, + <0x0 0x43000300 0x0 0x10>;Please follow convention of using
0x00as rest of the file:
Okay.
Quoted 20 lines
reg = <0x00 0x42040000 0x00 0x350>, ....Quoted 16 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +3
-0+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; };arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +6
-0@@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +wkup_thermal: wkup_thermal { + polling-delay-passive = <250>; /* milliseconds */
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi line 11
Quoted 5 lines
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +5
-0+ polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup_crit {Here and elsewhere no "-" in node names please.
I believe you meant no "_" ?
Quoted 7 lines
You can use:
https://github.com/nmenon/kernel_patch_verify
kpv -C -n <no of commits>This catches most issues like above
Okay
Quoted 70 lines
Quoted 70 lines
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file +62
-0+ temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu_thermal: mpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +c7x_thermal: c7x_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +gpu_thermal: gpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + gpu_crit: gpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +r5f_thermal: r5f_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + r5f_crit: r5f_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +};arch/arm64/boot/dts/ti/k3-j721e.dtsi +0
-0@@ -181,6 +181,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ };
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi line 187
Quoted 5 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi +4
-0}; + + thermal_zones: thermal-zones { + #include "k3-j721e-thermal.dtsi" + };Bit weird representation, any reason why thermal-zones {} cannot be moved into
k3-j721e-thermal.dtsi?
Okay. This could be moved. This is typically done when we have different zones defined under different dtsi files. Like in the case of omap5/dra7. The same was followed here. You are right this could be moved as we have all the zones under one dtsi.
Regards,
Keerthy
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi line 190
Quoted 4 lines
arch/arm64/boot/dts/ti/k3-j721e.dtsi +0
-0}; /* Now include the peripherals for each bus segments */Regards
Vignesh
Re: [PATCH v5 2/4] arm64: dts: ti: j721e: Add VTM node
In reply to KeerthyQuoted 15 lines · Keerthy
VTM stands for Voltage Thermal Management
Signed-off-by Keerthy <[email protected]>--- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 73 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 + 3 files changed, 86 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsiarch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +0
-0
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi line 422
Quoted 5 lines
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +2
-0@@ -418,4 +418,13 @@ interrupt-names = "int0", "int1"; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + + wkup_vtm0: wkup_vtm0@42040000 {
No, same comments as Rob gave you for bindings patch.
Please fix them in entire patchset, instead of ignoring.
Best regards,
Krzysztof
PATCH v5 3/4 arm64: dts: ti: j7200: Add VTM node
In reply to KeerthyVTM stands for Voltage Thermal Management
--- .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 ++++ arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 45 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 ++ 3 files changed, 58 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +9 -0
@@ -375,4 +375,13 @@ ti,loczrama = <1>; }; }; + + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x0 0x42040000 0x0 0x350>, + <0x0 0x42050000 0x0 0x350>, + <0x0 0x43000300 0x0 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; };
arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi new file +45 -0
45 lines not on this page · raw message
arch/arm64/boot/dts/ti/k3-j7200.dtsi +4 -0
@@ -168,6 +168,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */ }; }; + + thermal_zones: thermal-zones { + #include "k3-j7200-thermal.dtsi" + }; }; /* Now include the peripherals for each bus segments */
Signature · 1 line
2.17.1
Re: [PATCH v5 3/4] arm64: dts: ti: j7200: Add VTM node
Quoted 15 lines · Keerthy
VTM stands for Voltage Thermal Management
Signed-off-by Keerthy <[email protected]>--- .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 ++++ arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 45 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 ++ 3 files changed, 58 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsiarch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +0
-0
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi line 379
Quoted 5 lines
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +2
-0@@ -375,4 +375,13 @@ ti,loczrama = <1>; }; }; + + wkup_vtm0: wkup_vtm0@42040000 {
Same issues as in other patches.
Best regards,
Krzysztof
PATCH v5 4/4 thermal: k3_j72xx_bandgap: Add the bandgap driver support
In reply to KeerthyAdd VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production, with the resulting values stored in software-readable registers. Software should use these register values when translating the Temperature Monitor output codes to temperature values.
It has an involved workaround. Software needs to read the error codes for -40C, 30C, 125C from the efuse for each device & derive a new look up table for adc to temperature conversion. Involved calculating slopes & constants using 3 different straight line equations with adc refernce codes as the y-axis & error codes in the x-axis.
-40C to 30C
30C to 125C
125C to 150C
With the above 2 line equations we derive the full look-up table to workaround the errata i2128 for j721e SoC.
Tested temperature reading on J721e SoC & J7200 SoC.
---
Changes from v4:
* Fixed all the comments on v4.
* Simplified the computation of the table.
* Removed unnecessary members in the structures.
* int_pow in the math.h is for unsigned. Keeping the definition for signed
drivers/thermal/Makefile | 2 +- drivers/thermal/k3_j72xx_bandgap.c | 623 +++++++++++++++++++++++++++++ 2 files changed, 624 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
drivers/thermal/Makefile +1 -1
@@ -28,7 +28,7 @@ thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o -obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o k3_j72xx_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
drivers/thermal/k3_j72xx_bandgap.c new file +623 -0
623 lines not on this page · raw message
Signature · 1 line
2.17.1
kernel test robot
build botI love your patch! Yet something to improve:
Hi Keerthy,
I love your patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on rafael-pm/thermal v5.18-rc2 next-20220412] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Keerthy/thermal-k3_j72xx_bandgap-Add-the-bandgap-driver-support/20220412-193526 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next config: microblaze-buildonly-randconfig-r002-20220411 (https://download.01.org/0day-ci/archive/20220413/[email protected]/config) compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/de47884b9759d99f1971558a45283b912efbf22a
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Keerthy/thermal-k3_j72xx_bandgap-Add-the-bandgap-driver-support/20220412-193526 git checkout de47884b9759d99f1971558a45283b912efbf22a
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=microblaze SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
microblaze-linux-ld: drivers/thermal/k3_j72xx_bandgap.o: in function `init_table':
>> .tmp_gl_k3_j72xx_bandgap.o:(.text+0x69c): undefined reference to `__divdi3'
Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Quoted 7 lines · Keerthy
Add VTM thermal support. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
(...)
drivers/thermal/k3_j72xx_bandgap.c line 395
Quoted 2 lines
drivers/thermal/k3_j72xx_bandgap.c new file +2
-0+ +static void print_look_up_table (struct device *dev,int *ref_table)
Here and everywhere else in such cases - you do not modify pointed data, so pointers to const please.
drivers/thermal/k3_j72xx_bandgap.c line 406
Quoted 11 lines
drivers/thermal/k3_j72xx_bandgap.c new file +11
-0+{ +int i; + +dev_dbg (dev,"The contents of derived array\n" ); +dev_dbg (dev,"Code Temperaturei\n" ); +for (i =0 ; i <=1023 ; i++) +dev_dbg (dev,"%d %d %d\n" , i, derived_table[i], ref_table[i]); +} + +static const struct of_device_id of_k3_j72xx_bandgap_match[]; +
Why do you need forward declaration?
(....)
drivers/thermal/k3_j72xx_bandgap.c line 600
Quoted 5 lines
drivers/thermal/k3_j72xx_bandgap.c new file +5
-0+ +static const struct of_device_id of_k3_j72xx_bandgap_match[] = { + { + .compatible ="ti,j721e-vtm" , + .data = (void *)&k3_j72xx_bandgap_j721e_data,
Why do you need the cast?
Best regards,
Krzysztof
Dan Carpenter
build botCC: kbuild-all(a)lists.01.org BCC: lkp(a)intel.com In-Reply-To: <[email protected]> References: <[email protected]> TO: Keerthy <[email protected]> TO…
CC: kbuild-all(a)lists.01.org
BCC: lkp(a)intel.com
In-Reply-To: <[email protected]>
References: <[email protected]>
TO: Keerthy <[email protected]>
TO: robh+dt(a)kernel.org
TO: daniel.lezcano(a)linaro.org
TO: rui.zhang(a)intel.com
TO: amitk(a)kernel.org
TO: kristo(a)kernel.org
CC: j-keerthy(a)ti.com
CC: linux-pm(a)vger.kernel.org
CC: vigneshr(a)ti.com
CC: devicetree(a)vger.kernel.org
CC: linux-kernel(a)vger.kernel.org
Hi Keerthy,
I love your patch! Perhaps something to improve:
[auto build test WARNING on robh/for-next]
[also build test WARNING on rafael-pm/thermal v5.18-rc2 next-20220414] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Keerthy/thermal-k3_j72xx_bandgap-Add-the-bandgap-driver-support/20220412-193526 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
:::::: branch date: 3 days ago
:::::: commit date: 3 days ago
config: arc-randconfig-m031-20220411 (https://download.01.org/0day-ci/archive/20220415/202204151117.NLsoANXl-lkp(a)intel.com/config)
compiler: arc-elf-gcc (GCC) 11.2.0
If you fix the issue, kindly add following tag as appropriate
smatch warnings:drivers/thermal/k3_j72xx_bandgap.c:570 k3_j72xx_bandgap_probe() warn: passing devm_ allocated variable to kfree. 'ref_table'
vim +/ref_table +570 drivers/thermal/k3_j72xx_bandgap.c
de47884b9759d9 Keerthy 2022-04-12 410
de47884b9759d9 Keerthy 2022-04-12 411 static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
de47884b9759d9 Keerthy 2022-04-12 412 {
de47884b9759d9 Keerthy 2022-04-12 413 int ret = 0, cnt, val, id, table_size = 1024;
de47884b9759d9 Keerthy 2022-04-12 414 int high_max, low_temp;
de47884b9759d9 Keerthy 2022-04-12 415 struct resource *res;
de47884b9759d9 Keerthy 2022-04-12 416 struct device *dev = &pdev->dev;
de47884b9759d9 Keerthy 2022-04-12 417 struct k3_j72xx_bandgap *bgp;
de47884b9759d9 Keerthy 2022-04-12 418 struct k3_thermal_data *data;
de47884b9759d9 Keerthy 2022-04-12 419 int workaround_needed = 0;
de47884b9759d9 Keerthy 2022-04-12 420 const struct k3_j72xx_bandgap_data *driver_data;
de47884b9759d9 Keerthy 2022-04-12 421 struct thermal_zone_device *ti_thermal;
de47884b9759d9 Keerthy 2022-04-12 422 int *ref_table;
de47884b9759d9 Keerthy 2022-04-12 423 struct err_values err_vals;
de47884b9759d9 Keerthy 2022-04-12 424
de47884b9759d9 Keerthy 2022-04-12 425 s64 golden_factors[] = {
de47884b9759d9 Keerthy 2022-04-12 426 -490019999999999936,
de47884b9759d9 Keerthy 2022-04-12 427 3251200000000000,
de47884b9759d9 Keerthy 2022-04-12 428 -1705800000000,
de47884b9759d9 Keerthy 2022-04-12 429 603730000,
de47884b9759d9 Keerthy 2022-04-12 430 -92627,
de47884b9759d9 Keerthy 2022-04-12 431 };
de47884b9759d9 Keerthy 2022-04-12 432
de47884b9759d9 Keerthy 2022-04-12 433 s64 pvt_wa_factors[] = {
de47884b9759d9 Keerthy 2022-04-12 434 -415230000000000000,
de47884b9759d9 Keerthy 2022-04-12 435 3126600000000000,
de47884b9759d9 Keerthy 2022-04-12 436 -1157800000000,
de47884b9759d9 Keerthy 2022-04-12 437 };
de47884b9759d9 Keerthy 2022-04-12 438
de47884b9759d9 Keerthy 2022-04-12 439 bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
de47884b9759d9 Keerthy 2022-04-12 440 if (!bgp)
de47884b9759d9 Keerthy 2022-04-12 441 return -ENOMEM;
de47884b9759d9 Keerthy 2022-04-12 442
de47884b9759d9 Keerthy 2022-04-12 443 bgp->dev = dev;
de47884b9759d9 Keerthy 2022-04-12 444 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
de47884b9759d9 Keerthy 2022-04-12 445 bgp->base = devm_ioremap_resource(dev, res);
de47884b9759d9 Keerthy 2022-04-12 446 if (IS_ERR(bgp->base))
de47884b9759d9 Keerthy 2022-04-12 447 return PTR_ERR(bgp->base);
de47884b9759d9 Keerthy 2022-04-12 448
de47884b9759d9 Keerthy 2022-04-12 449 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
de47884b9759d9 Keerthy 2022-04-12 450 bgp->cfg2_base = devm_ioremap_resource(dev, res);
de47884b9759d9 Keerthy 2022-04-12 451 if (IS_ERR(bgp->cfg2_base))
de47884b9759d9 Keerthy 2022-04-12 452 return PTR_ERR(bgp->cfg2_base);
de47884b9759d9 Keerthy 2022-04-12 453
de47884b9759d9 Keerthy 2022-04-12 454 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
de47884b9759d9 Keerthy 2022-04-12 455 bgp->fuse_base = devm_ioremap_resource(dev, res);
de47884b9759d9 Keerthy 2022-04-12 456 if (IS_ERR(bgp->fuse_base))
de47884b9759d9 Keerthy 2022-04-12 457 return PTR_ERR(bgp->fuse_base);
de47884b9759d9 Keerthy 2022-04-12 458
de47884b9759d9 Keerthy 2022-04-12 459 driver_data = of_device_get_match_data(dev);
de47884b9759d9 Keerthy 2022-04-12 460 if (driver_data)
de47884b9759d9 Keerthy 2022-04-12 461 workaround_needed = driver_data->has_errata_i2128;
de47884b9759d9 Keerthy 2022-04-12 462
de47884b9759d9 Keerthy 2022-04-12 463 pm_runtime_enable(dev);
de47884b9759d9 Keerthy 2022-04-12 464 ret = pm_runtime_get_sync(dev);
de47884b9759d9 Keerthy 2022-04-12 465 if (ret < 0) {
de47884b9759d9 Keerthy 2022-04-12 466 pm_runtime_put_noidle(dev);
de47884b9759d9 Keerthy 2022-04-12 467 pm_runtime_disable(dev);
de47884b9759d9 Keerthy 2022-04-12 468 return ret;
de47884b9759d9 Keerthy 2022-04-12 469 }
de47884b9759d9 Keerthy 2022-04-12 470
de47884b9759d9 Keerthy 2022-04-12 471 /* Get the sensor count in the VTM */
de47884b9759d9 Keerthy 2022-04-12 472 val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
de47884b9759d9 Keerthy 2022-04-12 473 cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
de47884b9759d9 Keerthy 2022-04-12 474 cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
de47884b9759d9 Keerthy 2022-04-12 475
de47884b9759d9 Keerthy 2022-04-12 476 data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
de47884b9759d9 Keerthy 2022-04-12 477 if (!data) {
de47884b9759d9 Keerthy 2022-04-12 478 ret = -ENOMEM;
de47884b9759d9 Keerthy 2022-04-12 479 goto err_alloc;
de47884b9759d9 Keerthy 2022-04-12 480 }
de47884b9759d9 Keerthy 2022-04-12 481
de47884b9759d9 Keerthy 2022-04-12 482 ref_table = devm_kzalloc(bgp->dev, sizeof(*ref_table) * table_size,
de47884b9759d9 Keerthy 2022-04-12 483 GFP_KERNEL);
de47884b9759d9 Keerthy 2022-04-12 484 if (!ref_table) {
de47884b9759d9 Keerthy 2022-04-12 485 ret = -ENOMEM;
de47884b9759d9 Keerthy 2022-04-12 486 goto err_alloc;
de47884b9759d9 Keerthy 2022-04-12 487 }
de47884b9759d9 Keerthy 2022-04-12 488
de47884b9759d9 Keerthy 2022-04-12 489 derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * table_size,
de47884b9759d9 Keerthy 2022-04-12 490 GFP_KERNEL);
de47884b9759d9 Keerthy 2022-04-12 491 if (!derived_table) {
de47884b9759d9 Keerthy 2022-04-12 492 ret = -ENOMEM;
de47884b9759d9 Keerthy 2022-04-12 493 goto err_alloc;
de47884b9759d9 Keerthy 2022-04-12 494 }
de47884b9759d9 Keerthy 2022-04-12 495
de47884b9759d9 Keerthy 2022-04-12 496 /* Workaround not needed if bit30/bit31 is set even for J721e */
de47884b9759d9 Keerthy 2022-04-12 497 if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
de47884b9759d9 Keerthy 2022-04-12 498 workaround_needed = false;
de47884b9759d9 Keerthy 2022-04-12 499
de47884b9759d9 Keerthy 2022-04-12 500 dev_dbg(bgp->dev, "Work around %sneeded\n",
de47884b9759d9 Keerthy 2022-04-12 501 workaround_needed ? "not " : "");
de47884b9759d9 Keerthy 2022-04-12 502
de47884b9759d9 Keerthy 2022-04-12 503 if (!workaround_needed)
de47884b9759d9 Keerthy 2022-04-12 504 init_table(5, ref_table, golden_factors);
de47884b9759d9 Keerthy 2022-04-12 505 else
de47884b9759d9 Keerthy 2022-04-12 506 init_table(3, ref_table, pvt_wa_factors);
de47884b9759d9 Keerthy 2022-04-12 507
de47884b9759d9 Keerthy 2022-04-12 508 /* Register the thermal sensors */
de47884b9759d9 Keerthy 2022-04-12 509 for (id = 0; id < cnt; id++) {
de47884b9759d9 Keerthy 2022-04-12 510 data[id].bgp = bgp;
de47884b9759d9 Keerthy 2022-04-12 511 data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
de47884b9759d9 Keerthy 2022-04-12 512 data[id].stat_offset = data[id].ctrl_offset +
de47884b9759d9 Keerthy 2022-04-12 513 K3_VTM_TMPSENS_STAT_OFFSET;
de47884b9759d9 Keerthy 2022-04-12 514
de47884b9759d9 Keerthy 2022-04-12 515 if (workaround_needed) {
de47884b9759d9 Keerthy 2022-04-12 516 /* ref adc values for -40C, 30C & 125C respectively */
de47884b9759d9 Keerthy 2022-04-12 517 err_vals.refs[0] = MINUS40CREF;
de47884b9759d9 Keerthy 2022-04-12 518 err_vals.refs[1] = PLUS30CREF;
de47884b9759d9 Keerthy 2022-04-12 519 err_vals.refs[2] = PLUS125CREF;
de47884b9759d9 Keerthy 2022-04-12 520 err_vals.refs[3] = PLUS150CREF;
de47884b9759d9 Keerthy 2022-04-12 521 get_efuse_values(id, &data[id], err_vals.errs, bgp);
de47884b9759d9 Keerthy 2022-04-12 522 }
de47884b9759d9 Keerthy 2022-04-12 523
de47884b9759d9 Keerthy 2022-04-12 524 if (id == 0 && workaround_needed)
de47884b9759d9 Keerthy 2022-04-12 525 prep_lookup_table(&err_vals, ref_table);
de47884b9759d9 Keerthy 2022-04-12 526 else if (id == 0 && !workaround_needed)
de47884b9759d9 Keerthy 2022-04-12 527 memcpy(derived_table, ref_table, table_size * 4);
de47884b9759d9 Keerthy 2022-04-12 528
de47884b9759d9 Keerthy 2022-04-12 529 val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
de47884b9759d9 Keerthy 2022-04-12 530 val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
de47884b9759d9 Keerthy 2022-04-12 531 K3_VTM_TMPSENS_CTRL_SOC |
de47884b9759d9 Keerthy 2022-04-12 532 K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
de47884b9759d9 Keerthy 2022-04-12 533 writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
de47884b9759d9 Keerthy 2022-04-12 534
de47884b9759d9 Keerthy 2022-04-12 535 bgp->ts_data[id] = &data[id];
de47884b9759d9 Keerthy 2022-04-12 536 ti_thermal =
de47884b9759d9 Keerthy 2022-04-12 537 devm_thermal_zone_of_sensor_register(bgp->dev, id,
de47884b9759d9 Keerthy 2022-04-12 538 &data[id],
de47884b9759d9 Keerthy 2022-04-12 539 &k3_of_thermal_ops);
de47884b9759d9 Keerthy 2022-04-12 540 if (IS_ERR(ti_thermal)) {
de47884b9759d9 Keerthy 2022-04-12 541 dev_err(bgp->dev, "thermal zone device is NULL\n");
de47884b9759d9 Keerthy 2022-04-12 542 ret = PTR_ERR(ti_thermal);
de47884b9759d9 Keerthy 2022-04-12 543 goto err_alloc;
de47884b9759d9 Keerthy 2022-04-12 544 }
de47884b9759d9 Keerthy 2022-04-12 545 }
de47884b9759d9 Keerthy 2022-04-12 546
de47884b9759d9 Keerthy 2022-04-12 547 /*
de47884b9759d9 Keerthy 2022-04-12 548 * Program TSHUT thresholds
de47884b9759d9 Keerthy 2022-04-12 549 * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
de47884b9759d9 Keerthy 2022-04-12 550 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN bit
de47884b9759d9 Keerthy 2022-04-12 551 * This is already taken care as per of init
de47884b9759d9 Keerthy 2022-04-12 552 * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN bit
de47884b9759d9 Keerthy 2022-04-12 553 */
de47884b9759d9 Keerthy 2022-04-12 554 high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
de47884b9759d9 Keerthy 2022-04-12 555 low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
de47884b9759d9 Keerthy 2022-04-12 556
de47884b9759d9 Keerthy 2022-04-12 557 writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
de47884b9759d9 Keerthy 2022-04-12 558 K3_VTM_MISC_CTRL2_OFFSET);
de47884b9759d9 Keerthy 2022-04-12 559 mdelay(100);
de47884b9759d9 Keerthy 2022-04-12 560 writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
de47884b9759d9 Keerthy 2022-04-12 561 K3_VTM_MISC_CTRL_OFFSET);
de47884b9759d9 Keerthy 2022-04-12 562
de47884b9759d9 Keerthy 2022-04-12 563 platform_set_drvdata(pdev, bgp);
de47884b9759d9 Keerthy 2022-04-12 564
de47884b9759d9 Keerthy 2022-04-12 565 print_look_up_table(dev, ref_table);
de47884b9759d9 Keerthy 2022-04-12 566 /*
de47884b9759d9 Keerthy 2022-04-12 567 * Now that the derived_table has the appropriate look up values
de47884b9759d9 Keerthy 2022-04-12 568 * Free up the ref_table
de47884b9759d9 Keerthy 2022-04-12 569 */
de47884b9759d9 Keerthy 2022-04-12 @570 kfree(ref_table);
de47884b9759d9 Keerthy 2022-04-12 571
de47884b9759d9 Keerthy 2022-04-12 572 return 0;
de47884b9759d9 Keerthy 2022-04-12 573
de47884b9759d9 Keerthy 2022-04-12 574 err_alloc:
de47884b9759d9 Keerthy 2022-04-12 575 pm_runtime_put_sync(&pdev->dev);
de47884b9759d9 Keerthy 2022-04-12 576 pm_runtime_disable(&pdev->dev);
de47884b9759d9 Keerthy 2022-04-12 577
de47884b9759d9 Keerthy 2022-04-12 578 return ret;
de47884b9759d9 Keerthy 2022-04-12 579 }
de47884b9759d9 Keerthy 2022-04-12 580 Signature · 2 lines
0-DAY CI Kernel Test Service https://01.org/lkp
Hi Kheerty,
On 12/04/2022 12:14, Keerthy wrote:
[ ... ]
Quoted 35 lines
drivers/thermal/k3_j72xx_bandgap.c new file +35
-0+/** +* struct err_values - structure containing error/reference values +* @refs: reference error values for -40C, 30C, 125C & 150C +* @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse +*/ +struct err_values { +int refs[4 ]; +int errs[4 ]; +}; + +static void create_table_segments (struct err_values *err_vals,int seg, +int *ref_table) +{ +int m =0 , c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2; + +if (seg ==0 ) + idx1 =0 ; +else + idx1 = err_vals->refs[seg]; + + idx2 = err_vals->refs[seg +1 ]; + err1 = err_vals->errs[seg]; + err2 = err_vals->errs[seg +1 ]; + ref1 = err_vals->refs[seg]; + ref2 = err_vals->refs[seg +1 ]; + +/* +* Calculate the slope with adc values read from the register +* as the y-axis param and err in adc value as x-axis param +*/ + num = ref2 - ref1; + den = err2 - err1; +if (den) + m = num / den; + c = ref2 - m * err2;
drivers/thermal/k3_j72xx_bandgap.c line 134
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+ +/* +* Take care of divide by zero error if error values are same +* Or when the slope is 0 +*/ +if (den !=0 && m !=0 ) { +for (i = idx1; i <= idx2; i++) { + err = (i - c) / m; +if (((i + err1) <0 ) || ((i + err1) >1023 )) +continue ;
Should the test being against 'err' not 'err1' ?
Quoted 30 lines
drivers/thermal/k3_j72xx_bandgap.c new file +30
-0+ derived_table[i] = ref_table[i + err]; + } + }else {/* Constant error take care of divide by zero */ +for (i = idx1; i <= idx2; i++) { +if (((i + err1) <0 ) || ((i + err1) >1023 )) +continue ; + derived_table[i] = ref_table[i + err1]; + } + } +} + +static int prep_lookup_table (struct err_values *err_vals,int *ref_table) +{ +int inc, i, seg; + +/* +* Fill up the lookup table under 3 segments +* region -40C to +30C +* region +30C to +125C +* region +125C to +150C +*/ +for (seg =0 ; seg <3 ; seg++) +create_table_segments (err_vals, seg, ref_table); + +/* Get to the first valid temperature */ + i =0 ; +while (!derived_table[i]) + i++; + +/*
drivers/thermal/k3_j72xx_bandgap.c line 174
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+* Get to the last zero index and back fill the temperature for +* sake of continuity +*/ +if (i) { +/* 300 milli celsius steps */ +while (i--) + derived_table[i] = derived_table[i +1 ] -300 ; +/* case 0 */ + derived_table[i] = derived_table[i +1 ] -300 ; + }
memset ?
drivers/thermal/k3_j72xx_bandgap.c line 182
Quoted 8 lines
drivers/thermal/k3_j72xx_bandgap.c new file +8
-0+ +/* +* Fill the last trailing 0s which are unfilled with increments of +* 100 milli celsius till 1023 code +*/ + i =1023 ; +while (!derived_table[i]) + i--;
All those loop can be replaced by addresses variant IMO. Up to you if you want to use mem* variants.
eg. void *flz = memrchr(derived_table, 0, size); /* find last zero */
drivers/thermal/k3_j72xx_bandgap.c line 192
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+ + i++; + inc =1 ; +while (i <1024 ) { + derived_table[i] = derived_table[i -1 ] + inc *100 ; + i++; + } + +return 0 ; +}
Please replace all the 1024-ish literals everywhere by a macro
Quoted 155 lines
drivers/thermal/k3_j72xx_bandgap.c new file +155
-0+struct k3_thermal_data ; + +struct k3_j72xx_bandgap { +struct device *dev; +void __iomem *base; +void __iomem *cfg2_base; +void __iomem *fuse_base; +struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS ]; +}; + +/* common data structures */ +struct k3_thermal_data { +struct k3_j72xx_bandgap *bgp; +u32 ctrl_offset; +u32 stat_offset; +}; + +static int two_cmp (int tmp,int mask) +{ + tmp = ~(tmp); + tmp &= mask; + tmp +=1 ; + +/* Return negative value */ +return (0 - tmp); +} + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static inline int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_j72xx_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; +/* +* Errata is applicable for am654 pg 1.0 silicon/J7ES. There +* is a variation of the order for certain degree centigrade on AM654. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <0 || dtemp >1023 ) +return -EINVAL ; + + *temp = derived_table[dtemp]; + +return 0 ; +} + +/* Get temperature callback function for thermal zone */ +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static int k3_j72xx_bandgap_temp_to_adc_code (int temp) +{ +int low =0 , high =1023 , mid; + +if (temp >160000 || temp <-50000 ) +return -EINVAL ; + +/* Binary search to find the adc code */ +while (low < (high -1 )) { + mid = (low + high) /2 ; +if (temp <= derived_table[mid]) + high = mid; +else + low = mid; + } + +return mid; +} + +static void get_efuse_values (int id,struct k3_thermal_data *data,int *err, +struct k3_j72xx_bandgap *bgp) +{ +int i, tmp, pow; +int ct_offsets[K3_VTM_CORRECTION_TEMP_CNT ]; +int ct_bm[K3_VTM_CORRECTION_TEMP_CNT ]; + +/* Populate efuse reg offsets & Bit masks for -40C, 30C, 125C */ +switch (id) { +case 0 : + ct_offsets[0 ] =0x0 ; + ct_offsets[1 ] =0x8 ; + ct_offsets[2 ] =0x4 ; + ct_bm[0 ] =0x3f ; + ct_bm[1 ] =0x1fe000 ; + ct_bm[2 ] =0x1ff ; +break ; + +case 1 : + ct_offsets[0 ] =0x0 ; + ct_offsets[1 ] =0x8 ; + ct_offsets[2 ] =0x4 ; + ct_bm[0 ] =0xfc0 ; + ct_bm[1 ] =0x1fe00000 ; + ct_bm[2 ] =0x3fe00 ; +break ; + +case 2 : + ct_offsets[0 ] =0x0 ; + ct_offsets[1 ] =-1 ; + ct_offsets[2 ] =0x4 ; + ct_bm[0 ] =0x3f000 ; + ct_bm[1 ] =0x7f800000 ; + ct_bm[2 ] =0x7fc0000 ; +break ; + +case 3 : + ct_offsets[0 ] =0x0 ; + ct_offsets[1 ] =0xC ; + ct_offsets[2 ] =-1 ;/* Spread across 2 registers */ + ct_bm[0 ] =0xfc0000 ; + ct_bm[1 ] =0x1fe0 ; + ct_bm[2 ] =0x1f800000 ; +break ;
drivers/thermal/k3_j72xx_bandgap.c line 358
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+ +case 4 : + ct_offsets[0 ] =0x0 ; + ct_offsets[1 ] =0xc ; + ct_offsets[2 ] =0x8 ; + ct_bm[0 ] =0x3f000000 ; + ct_bm[1 ] =0x1fe000 ; + ct_bm[2 ] =0x1ff0 ; +break ; + }
The way this is initialized looks strange to me
Why not:
int ct_offsets[][] = {
{ 0x0, 0x8, 0x4 },
{ 0x0, 0x8, 0x4 },
{ 0x0, -1, 0x4 },
{ 0x0, 0xC, -1 }
{ 0x0, 0xc, 0x8 }};
int ct_bm[][] = {
{ 0x3f, 0x1fe000, 0x1ff },
{ 0xfc0, 0x1fe000, 0x3fe00 },
{ 0x3f000, 0x7f800000, 0x7fc0000 },
{ 0xfc0000, 0x1fe0, 0x1f800000 },
{ 0x3f000000, 0x1fe000, 0x1ff0 }
};And then : ct_offsets[id][i] below ?
drivers/thermal/k3_j72xx_bandgap.c line 360
Quoted 1 line
drivers/thermal/k3_j72xx_bandgap.c new file +1
-0+for (i =0 ; i <3 ; i++) {
ARRAY_SIZE on ct_offsets ?
Quoted 30 lines
drivers/thermal/k3_j72xx_bandgap.c new file +30
-0+/* Extract the offset value using bit-mask */ +if (ct_offsets[i] ==-1 && i ==1 ) { +/* 25C offset Case of Sensor 2 split between 2 regs */ + tmp = (readl (bgp->fuse_base +0x8 ) &0xE0000000 ) >> (29 ); + tmp |= ((readl (bgp->fuse_base +0xC ) &0x1F ) <<3 ); + pow = tmp &0x80 ; + }else if (ct_offsets[i] ==-1 && i ==2 ) { +/* 125C Case of Sensor 3 split between 2 regs */ + tmp = (readl (bgp->fuse_base +0x4 ) &0xF8000000 ) >> (27 ); + tmp |= ((readl (bgp->fuse_base +0x8 ) &0xF ) <<5 ); + pow = tmp &0x100 ; + }else { + tmp =readl (bgp->fuse_base + ct_offsets[i]); + tmp &= ct_bm[i]; + tmp = tmp >>__ffs (ct_bm[i]); + +/* Obtain the sign bit pow*/ + pow = ct_bm[i] >>__ffs (ct_bm[i]); + pow +=1 ; + pow /=2 ; + } + +/* Check for negative value */ +if (tmp & pow) { +/* 2's complement value */ + tmp =two_cmp (tmp, ct_bm[i] >>__ffs (ct_bm[i])); + } + err[i] = tmp; + } +
drivers/thermal/k3_j72xx_bandgap.c line 400
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+/* Err value for 150C is set to 0 */ + err[i] =0 ; +} + +static void print_look_up_table (struct device *dev,int *ref_table) +{ +int i; + +dev_dbg (dev,"The contents of derived array\n" ); +dev_dbg (dev,"Code Temperaturei\n" );
Typo: "Temperaturei"
drivers/thermal/k3_j72xx_bandgap.c line 405
Quoted 5 lines
drivers/thermal/k3_j72xx_bandgap.c new file +5
-0+for (i =0 ; i <=1023 ; i++) +dev_dbg (dev,"%d %d %d\n" , i, derived_table[i], ref_table[i]); +} + +static const struct of_device_id of_k3_j72xx_bandgap_match[];
Pointless forward declaration
drivers/thermal/k3_j72xx_bandgap.c line 413
Quoted 8 lines
drivers/thermal/k3_j72xx_bandgap.c new file +8
-0+ +struct k3_j72xx_bandgap_data { +unsigned int has_errata_i2128; +}; + +static int k3_j72xx_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, table_size =1024 ;
table_size to be replaced by the macro mentioned above
Quoted 10 lines
drivers/thermal/k3_j72xx_bandgap.c new file +10
-0+int high_max, low_temp; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_j72xx_bandgap *bgp; +struct k3_thermal_data *data; +int workaround_needed =0 ; +const struct k3_j72xx_bandgap_data *driver_data; +struct thermal_zone_device *ti_thermal; +int *ref_table; +struct err_values err_vals;
[ ... ]
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog