Skip to contentSkip to conversation

Add unit test module for AMD P-State driver

PATCH Superseded Meng Li 4 participants 10 messages Apr 13, 2022 – Apr 17, 2022

Subsystems (4)

v2 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Meng Li

author
#0 lore raw

v2 cover Add unit test module for AMD P-State driver

Hi all:

AMD P-State unit test(amd_pstate_testmod) is a kernel module for testing the functions of amd-pstate driver.
It could import as a module to launch some test tasks.

We upstream out AMD P-state driver into Linux kernel and use this unit test module to verify the required conditions and basic functions of amd-pstate before integration test.

We use test module in the kselftest frameworks to implement it. We create amd_pstate_testmod module and tie it into kselftest.

For exmaple: The test case aput_acpi_cpc is used to check whether the _CPC object is exist in SBIOS.
The amd-pstate initialization will fail if the _CPC in ACPI SBIOS is not existed at the detected processor, so it is a necessary condition.

At present, its test cases are very simple, and the corresponding test cases will continue to be added later to improve the test coverage.

See patch series in below git repo:
V1: https://lore.kernel.org/linux-pm/[email protected]/

Changes from V1 -> V2:
- cpufreq: amd-pstate:
- - add a trailing of amd-pstate.h to MAINTAINER AMD PSTATE DRIVER
- selftests: cpufreq
- - add a wrapper shell script for the amd_pstate_testmod module
- selftests: cpufreq:
- - remove amd_pstate_testmod kernel module to .../cpufreq/amd_pstate_testmod
- Documentation: amd-pstate:
- - amd_pstate_testmod rst document is not provided at present.

Thanks,
Jasmine

Meng Li (3):
cpufreq: amd-pstate: Expose struct amd_cpudata
selftests: cpufreq: Add wapper script for test AMD P-State
selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

 MAINTAINERS                                   |   1 +
 drivers/cpufreq/amd-pstate.c                  |  60 +---
 include/linux/amd-pstate.h                    |  74 +++++
 tools/testing/selftests/cpufreq/Makefile      |   2 +-
 .../selftests/cpufreq/amd_pstate_testmod.sh   |   4 +
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 tools/testing/selftests/cpufreq/config        |   1 +
 8 files changed, 404 insertions(+), 60 deletions(-)
 create mode 100644 include/linux/amd-pstate.h
 create mode 100755 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v2 1/3 cpufreq: amd-pstate: Expose struct amd_cpudata

Expose struct amd_cpudata to AMD P-State unit test module.

This data struct will be used on the following AMD P-State unit test (amd-pstate-ut) module. The amd-pstate-ut module can get some AMD infomations by this data struct. For example: highest perf, nominal perf, boost supported etc.

---
 MAINTAINERS                  |  1 +
 drivers/cpufreq/amd-pstate.c | 60 +----------------------------
 include/linux/amd-pstate.h   | 74 ++++++++++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 59 deletions(-)
 create mode 100644 include/linux/amd-pstate.h
MAINTAINERS +1 -0
index 9832b607e2e2..f108e83ba851 100644
@@ -1003,6 +1003,7 @@ S:	Supported
 F:	Documentation/admin-guide/pm/amd-pstate.rst
 F:	drivers/cpufreq/amd-pstate*
 F:	tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
+F:	include/linux/amd-pstate.h
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <[email protected]>
drivers/cpufreq/amd-pstate.c +1 -59

72 lines not on this page · raw message

include/linux/amd-pstate.h new file +74 -0

74 lines not on this page · raw message

Signature · 1 line
2.25.1
maintainer Acked-by on v2 1/3
#2 lore raw

Re: [PATCH 1/3] cpufreq: amd-pstate: Expose struct amd_cpudata

Quoted 8 lines · Meng Li

Expose struct amd_cpudata to AMD P-State unit test module.

This data struct will be used on the following AMD P-State unit test (amd-pstate-ut) module. The amd-pstate-ut module can get some AMD infomations by this data struct. For example: highest perf, nominal perf, boost supported etc.

Quoted 180 lines
---
 MAINTAINERS                  |  1 +
 drivers/cpufreq/amd-pstate.c | 60 +----------------------------
 include/linux/amd-pstate.h   | 74 ++++++++++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 59 deletions(-)
 create mode 100644 include/linux/amd-pstate.h
MAINTAINERS +1 -0
index 9832b607e2e2..f108e83ba851 100644
@@ -1003,6 +1003,7 @@ S:	Supported
 F:	Documentation/admin-guide/pm/amd-pstate.rst
 F:	drivers/cpufreq/amd-pstate*
 F:	tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
+F:	include/linux/amd-pstate.h
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <[email protected]>
drivers/cpufreq/amd-pstate.c +1 -59
index 7be38bc6a673..5f7a00a64f76 100644
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <linux/static_call.h>
+#include <linux/amd-pstate.h>
 
 #include <acpi/processor.h>
 #include <acpi/cppc_acpi.h>
@@ -65,65 +66,6 @@ MODULE_PARM_DESC(shared_mem,
 
 static struct cpufreq_driver amd_pstate_driver;
 
-/**
- * struct  amd_aperf_mperf
- * @aperf: actual performance frequency clock count
- * @mperf: maximum performance frequency clock count
- * @tsc:   time stamp counter
- */
-struct amd_aperf_mperf {
-	u64 aperf;
-	u64 mperf;
-	u64 tsc;
-};
-
-/**
- * struct amd_cpudata - private CPU data for AMD P-State
- * @cpu: CPU number
- * @req: constraint request to apply
- * @cppc_req_cached: cached performance request hints
- * @highest_perf: the maximum performance an individual processor may reach,
- *		  assuming ideal conditions
- * @nominal_perf: the maximum sustained performance level of the processor,
- *		  assuming ideal operating conditions
- * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
- *			   savings are achieved
- * @lowest_perf: the absolute lowest performance level of the processor
- * @max_freq: the frequency that mapped to highest_perf
- * @min_freq: the frequency that mapped to lowest_perf
- * @nominal_freq: the frequency that mapped to nominal_perf
- * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
- * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
- * @prev: Last Aperf/Mperf/tsc count value read from register
- * @freq: current cpu frequency value
- * @boost_supported: check whether the Processor or SBIOS supports boost mode
- *
- * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
- * represents all the attributes and goals that AMD P-State requests at runtime.
- */
-struct amd_cpudata {
-	int	cpu;
-
-	struct	freq_qos_request req[2];
-	u64	cppc_req_cached;
-
-	u32	highest_perf;
-	u32	nominal_perf;
-	u32	lowest_nonlinear_perf;
-	u32	lowest_perf;
-
-	u32	max_freq;
-	u32	min_freq;
-	u32	nominal_freq;
-	u32	lowest_nonlinear_freq;
-
-	struct amd_aperf_mperf cur;
-	struct amd_aperf_mperf prev;
-
-	u64 freq;
-	bool	boost_supported;
-};
-
 static inline int pstate_enable(bool enable)
 {
 	return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
include/linux/amd-pstate.h new file +74 -0
new file mode 100644
index 000000000000..790b04c9000b
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/include/linux/amd-pstate.h
+ *
+ * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
+ * Author: Meng Li <[email protected]>
+ */
+#ifndef _LINUX_AMD_PSTATE_H
+#define _LINUX_AMD_PSTATE_H
+
+#include <linux/pm_qos.h>
+/*********************************************************************
+ *                        AMD P-state INTERFACE                       *
+ *********************************************************************/
+/**
+ * struct  amd_aperf_mperf
+ * @aperf: actual performance frequency clock count
+ * @mperf: maximum performance frequency clock count
+ * @tsc:   time stamp counter
+ */
+struct amd_aperf_mperf {
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+};
+
+/**
+ * struct amd_cpudata - private CPU data for AMD P-State
+ * @cpu: CPU number
+ * @req: constraint request to apply
+ * @cppc_req_cached: cached performance request hints
+ * @highest_perf: the maximum performance an individual processor may reach,
+ *		  assuming ideal conditions
+ * @nominal_perf: the maximum sustained performance level of the processor,
+ *		  assuming ideal operating conditions
+ * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
+ *			   savings are achieved
+ * @lowest_perf: the absolute lowest performance level of the processor
+ * @max_freq: the frequency that mapped to highest_perf
+ * @min_freq: the frequency that mapped to lowest_perf
+ * @nominal_freq: the frequency that mapped to nominal_perf
+ * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
+ * @prev: Last Aperf/Mperf/tsc count value read from register
+ * @freq: current cpu frequency value
+ * @boost_supported: check whether the Processor or SBIOS supports boost mode
+ *
+ * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
+ * represents all the attributes and goals that AMD P-State requests at runtime.
+ */
+struct amd_cpudata {
+	int	cpu;
+
+	struct	freq_qos_request req[2];
+	u64	cppc_req_cached;
+
+	u32	highest_perf;
+	u32	nominal_perf;
+	u32	lowest_nonlinear_perf;
+	u32	lowest_perf;
+
+	u32	max_freq;
+	u32	min_freq;
+	u32	nominal_freq;
+	u32	lowest_nonlinear_freq;
+
+	struct amd_aperf_mperf cur;
+	struct amd_aperf_mperf prev;
+
+	u64	freq;
+	bool	boost_supported;
+};
+
+#endif /* _LINUX_AMD_PSTATE_H */
Signature · 1 line
2.25.1
author
#3 lore raw

PATCH v2 2/3 selftests: cpufreq: Add wapper script for test AMD P-State

In reply to Meng Li

Adds a wrapper shell script for the amd_pstate_testmod module.

---
 tools/testing/selftests/cpufreq/Makefile              | 2 +-
 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh | 4 ++++
 tools/testing/selftests/cpufreq/config                | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh
tools/testing/selftests/cpufreq/Makefile +1 -1
index c86ca8342222..c32adc59a1f4 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 all:
 
-TEST_PROGS := main.sh
+TEST_PROGS := main.sh amd_pstate_testmod.sh
 TEST_FILES := cpu.sh cpufreq.sh governor.sh module.sh special-tests.sh
 
 include ../lib.mk
tools/testing/selftests/cpufreq/amd_pstate_testmod.sh new file +4 -0
new file mode 100755
index 000000000000..5398ad568885
@@ -0,0 +1,4 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Tests the AMD P-State unit test infrastructure using amd_pstate_testmod kernel module.
+$(dirname $0)/../kselftest/module.sh "amd_pstate_testmod" amd_pstate_testmod
tools/testing/selftests/cpufreq/config +1 -0
index 75e900793e8a..374a8adbb34c 100644
@@ -13,3 +13,4 @@ CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCKDEP=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_AMD_PSTATE_TESTMOD=m
Signature · 1 line
2.25.1
#4 lore raw

Re: [PATCH 2/3] selftests: cpufreq: Add wapper script for test AMD P-State

Quoted 15 lines · Meng Li

Adds a wrapper shell script for the amd_pstate_testmod module.

---
 tools/testing/selftests/cpufreq/Makefile              | 2 +-
 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh | 4 ++++
 tools/testing/selftests/cpufreq/config                | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh
tools/testing/selftests/cpufreq/Makefile +0 -0
index c86ca8342222..c32adc59a1f4 100644

tools/testing/selftests/cpufreq/Makefile line 4

Quoted 5 lines
tools/testing/selftests/cpufreq/Makefile +1 -1
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 all:
 
-TEST_PROGS := main.sh
+TEST_PROGS := main.sh amd_pstate_testmod.sh

Instead of making the amd-pstate testing a separate test program, should this be part of the main.sh testing program?

Perhaps adding a "driver" test function that can check for the amd-pstate driver being in use and run the test module.

-Nathan

Quoted 22 lines
tools/testing/selftests/cpufreq/Makefile +0 -0
 TEST_FILES := cpu.sh cpufreq.sh governor.sh module.sh special-tests.sh
 
 include ../lib.mk
tools/testing/selftests/cpufreq/amd_pstate_testmod.sh new file +4 -0
new file mode 100755
index 000000000000..5398ad568885
@@ -0,0 +1,4 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Tests the AMD P-State unit test infrastructure using amd_pstate_testmod kernel module.
+$(dirname $0)/../kselftest/module.sh "amd_pstate_testmod" amd_pstate_testmod
tools/testing/selftests/cpufreq/config +1 -0
index 75e900793e8a..374a8adbb34c 100644
@@ -13,3 +13,4 @@ CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCKDEP=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_AMD_PSTATE_TESTMOD=m
author
#5 lore raw

PATCH v2 3/3 selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

In reply to Meng Li

Add amd_pstate_testmod module, which is conceptually out-of-tree module and provides ways for selftests/cpufreq amd pstate driver to test various kernel module-related functionality. This module will be expected by some of selftests to be present and loaded.

---
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 2 files changed, 322 insertions(+)
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c
tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile new file +20 -0
new file mode 100644
index 000000000000..8a5596cb2c18
@@ -0,0 +1,20 @@
+AMD_PSTATE_TESTMOD_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST)))))
+KDIR ?= $(abspath $(AMD_PSATE_TESTMOD_DIR)/../../../../..)
+
+ifeq ($(V),1)
+Q =
+else
+Q = @
+endif
+
+MODULES = amd_pstate_testmod.ko
+
+obj-m += amd_pstate_testmod.o
+CFLAGS_amd_pstate_testmod.o = -I$(src)
+
+all:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) modules
+
+clean:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) clean
+
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +302 -0

302 lines not on this page · raw message

Signature · 1 line
2.25.1
#6 lore raw

Re: [PATCH 3/3] selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

Quoted 140 lines · Meng Li

Add amd_pstate_testmod module, which is conceptually out-of-tree module and provides ways for selftests/cpufreq amd pstate driver to test various kernel module-related functionality. This module will be expected by some of selftests to be present and loaded.

---
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 2 files changed, 322 insertions(+)
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c
tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile new file +20 -0
new file mode 100644
index 000000000000..8a5596cb2c18
@@ -0,0 +1,20 @@
+AMD_PSTATE_TESTMOD_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST)))))
+KDIR ?= $(abspath $(AMD_PSATE_TESTMOD_DIR)/../../../../..)
+
+ifeq ($(V),1)
+Q =
+else
+Q = @
+endif
+
+MODULES = amd_pstate_testmod.ko
+
+obj-m += amd_pstate_testmod.o
+CFLAGS_amd_pstate_testmod.o = -I$(src)
+
+all:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) modules
+
+clean:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) clean
+
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +95 -0
new file mode 100644
index 000000000000..a892cecf19da
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-1.0-or-later
+/*
+ * AMD Processor P-state Frequency Driver Unit Test
+ *
+ * Copyright (C) 2022 Advanced Micro Devices, Inc. All Rights Reserved.
+ *
+ * Author: Meng Li <[email protected]>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "../../kselftest_module.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/amd-pstate.h>
+
+#include <acpi/cppc_acpi.h>
+
+/*
+ * Abbreviations:
+ * aput: used as a shortform for AMD P-State unit test.
+ * It helps to keep variable names smaller, simpler
+*/
+
+KSTM_MODULE_GLOBALS();
+
+/*
+ * Kernel module for testing the AMD P-State unit test
+ */
+enum aput_result {
+	APUT_RESULT_PASS,	//0
+	APUT_RESULT_FAIL,	//
+	MAX_APUT_RESULT,
+};
+
+struct aput_struct {
+	const char *name;
+	void (*func)(u32 index);
+	enum aput_result result;
+};
+
+static void aput_x86_vendor(u32 index);
+static void aput_acpi_cpc(u32 index);
+static void aput_modprobed_driver(u32 index);
+static void aput_capability_check(u32 index);
+static void aput_enable(u32 index);
+static void aput_init_perf(u32 index);
+static void aput_support_boost(u32 index);
+
+static struct aput_struct aput_cases[] = {
+	{"x86_vendor",          aput_x86_vendor          },
+	{"acpi_cpc_valid",      aput_acpi_cpc            },
+	{"modprobed_driver",    aput_modprobed_driver    },
+	{"capability_check",    aput_capability_check    },
+	{"enable",              aput_enable              },
+	{"init_perf",           aput_init_perf           },
+	{"support_boost",       aput_support_boost       }
+};
+
+static bool get_shared_mem(void)
+{
+	bool result = false;
+	char buf[5] = {0};
+	struct file *filp = NULL;
+	loff_t pos = 0;
+	ssize_t ret;
+
+	filp = filp_open("/sys/module/amd_pstate/parameters/shared_mem", FMODE_PREAD, 0);
+	if (IS_ERR(filp))
+	{
+		pr_err("%s Open param file fail! \n", __func__);
+	}
+	else
+	{
+		ret = kernel_read(filp, &buf, sizeof(buf), &pos);
+		if (ret < 0)
+		{
+			pr_err("%s ret=%ld unable to read from param file! \n", __func__, ret);
+		}
+		filp_close(filp, NULL);
+	}
+
+	if ('Y' == *buf)
+	{
+		result = true;
+	}
+
+	return (result);
+}
+
+static void aput_x86_vendor(u32 index)

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 105

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+{
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}

Is this test needed?

the amd-pstate is only supported on AMD systems. If anything this should be one of the first tests and have the testing bail out if this fails.

Or, have the script (amd_pstate_testmod.sh) verify this is an AMD system before launching the tests.

Quoted 14 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +14 -0
+
+static void aput_acpi_cpc(u32 index)
+{
+	if (acpi_cpc_valid())
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_modprobed_driver(u32 index)

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 129

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+{
+	if (cpufreq_get_current_driver())
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}

What is this testing?

Shouldn't you verify that the current driver is the amd-pstate driver? This just verifies that there is a driver.

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+
+static void aput_capability_check(u32 index)
+{
+	if (boot_cpu_has(X86_FEATURE_CPPC))
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		//shared memory

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 149

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+		if (get_shared_mem())
+		{
+			aput_cases[index].result = APUT_RESULT_PASS;
+		}
+		else
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+		}
+	}
+}

Another where I'm not sure what you're trying to test. If we're using amd-pstate you have to be using either MSRs or shared memory. Either of these set the result to PASS.

There are other test cases below that I have questions about but before digging into them I think some additional documentation about what you're trying to test with this module would be nice to have. Theses test seem more like verifying the amd-pstate module is in use rather than testing anything.

-Nathan

Quoted 153 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +153 -0
+
+static void aput_pstate_enable(u32 index)
+{
+	int ret = 0;
+	u64 cppc_enable = 0;
+
+	ret = rdmsrl_safe(MSR_AMD_CPPC_ENABLE, &cppc_enable);
+	if (ret)
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+		pr_err("%s rdmsrl_safe MSR_AMD_CPPC_ENABLE ret=%d is error! \n", __func__, ret);
+		return;
+	}
+	if (cppc_enable)
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_enable(u32 index)
+{
+	if (get_shared_mem())
+	{
+		//not check
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_pstate_enable(index);
+	}
+}
+
+static void aput_init_perf(u32 index)
+{
+	int cpu = 0, ret = 0;
+	u32 highest_perf = 0, nominal_perf = 0, lowest_nonlinear_perf = 0, lowest_perf = 0;
+	u64 cap1 = 0;
+	struct cppc_perf_caps cppc_perf;
+	struct cpufreq_policy *policy = NULL;
+        struct amd_cpudata *cpudata = NULL;
+
+	//get perf
+	highest_perf = amd_get_highest_perf();
+
+	for_each_possible_cpu(cpu)
+	{
+		//get amd cpudata
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			break;
+		cpudata = policy->driver_data;
+
+		if (get_shared_mem())
+		{
+			ret = cppc_get_perf_caps(cpu, &cppc_perf);
+			if (ret)
+			{
+				aput_cases[index].result = APUT_RESULT_FAIL;
+				pr_err("%s cppc_get_perf_caps ret=%d is error! \n", __func__, ret);
+				return;
+			}
+
+			nominal_perf = cppc_perf.nominal_perf;
+			lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf;
+			lowest_perf = cppc_perf.lowest_perf;
+		}
+		else
+		{
+			ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1);
+			if (ret)
+			{
+				aput_cases[index].result = APUT_RESULT_FAIL;
+				pr_err("%s rdmsrl_safe_on_cpu MSR_AMD_CPPC_CAP1 ret=%d is error! \n", __func__, ret);
+				return;
+			}
+
+			//get perf from MSR
+			nominal_perf = AMD_CPPC_NOMINAL_PERF(cap1);
+			lowest_nonlinear_perf = AMD_CPPC_LOWNONLIN_PERF(cap1);
+			lowest_perf = AMD_CPPC_LOWEST_PERF(cap1);
+		}
+
+		//check highest_perf,nominal_perf,lowest_nonlinear_perf
+		if ((highest_perf != READ_ONCE(cpudata->highest_perf)) ||
+			(nominal_perf != READ_ONCE(cpudata->nominal_perf)) ||
+			(lowest_nonlinear_perf != READ_ONCE(cpudata->lowest_nonlinear_perf)) ||
+			(lowest_perf != READ_ONCE(cpudata->lowest_perf)))
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+			pr_err("%s cpu%d highest_perf=%d %d nominal_perf=%d %d lowest_nonlinear_perf=%d %d lowest_perf=%d %d are not equal! \n",
+				__func__, cpu, highest_perf, cpudata->highest_perf,
+				nominal_perf, cpudata->nominal_perf,
+				lowest_nonlinear_perf, cpudata->lowest_nonlinear_perf,
+				lowest_perf, cpudata->lowest_perf);
+			return;
+		}
+	}
+
+	aput_cases[index].result = APUT_RESULT_PASS;
+}
+
+static void aput_support_boost(u32 index)
+{
+	int cpu = 0;
+	struct cpufreq_policy *policy = NULL;
+        struct amd_cpudata *cpudata = NULL;
+
+	for_each_possible_cpu(cpu)
+	{
+		//get amd cpudata
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			break;
+		cpudata = policy->driver_data;
+
+		if (READ_ONCE(cpudata->boost_supported))
+		{
+			aput_cases[index].result = APUT_RESULT_PASS;
+		}
+		else
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+			break;
+		}
+	}
+}
+
+static void aput_do_test_case(void)
+{
+	u32 i=0, arr_size = ARRAY_SIZE(aput_cases);
+
+	for (i = 0; i < arr_size; i++)
+	{
+		pr_info("****** Begin %-5d\t %-20s\t ******\n", i+1, aput_cases[i].name);
+		aput_cases[i].func(i);
+		KSTM_CHECK_ZERO(aput_cases[i].result);
+		pr_info("****** End   %-5d\t %-20s\t ******\n", i+1, aput_cases[i].name);
+	}
+}
+
+static void __init selftest(void)
+{
+	aput_do_test_case();
+}
+
+KSTM_MODULE_LOADERS(amd_pstate_testmod);
+MODULE_AUTHOR("Meng Li <[email protected]>");
+MODULE_DESCRIPTION("Unit test for AMD P-state driver");
+MODULE_LICENSE("GPL");
maintainer
#7 lore raw

Re: [PATCH 3/3] selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

In reply to Meng Li
Quoted 45 lines · Li (Jassmine)

Add amd_pstate_testmod module, which is conceptually out-of-tree module and provides ways for selftests/cpufreq amd pstate driver to test various kernel module-related functionality. This module will be expected by some of selftests to be present and loaded.

---
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 2 files changed, 322 insertions(+)
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c
tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile new file +20 -0
new file mode 100644
index 000000000000..8a5596cb2c18
@@ -0,0 +1,20 @@
+AMD_PSTATE_TESTMOD_DIR := $(realpath $(dir $(abspath $(lastword $(MAKEFILE_LIST)))))
+KDIR ?= $(abspath $(AMD_PSATE_TESTMOD_DIR)/../../../../..)
+
+ifeq ($(V),1)
+Q =
+else
+Q = @
+endif
+
+MODULES = amd_pstate_testmod.ko
+
+obj-m += amd_pstate_testmod.o
+CFLAGS_amd_pstate_testmod.o = -I$(src)
+
+all:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) modules
+
+clean:
+	+$(Q)make -C $(KDIR) M=$(AMD_PSTATE_TESTMOD_DIR) clean
+
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +0 -0
new file mode 100644
index 000000000000..a892cecf19da

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 8

Quoted 8 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +8 -0
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-1.0-or-later
+/*
+ * AMD Processor P-state Frequency Driver Unit Test
+ *
+ * Copyright (C) 2022 Advanced Micro Devices, Inc. All Rights Reserved.
+ *
+ * Author: Meng Li <[email protected]>
+ *

We would like to explain the goal or intention of the AMD P-State Unit Test module here.

E.X.:

1. The AMD P-State Unit Test can help all users to verify their processor support (SBIOS/Firmware or Hardware).
2. Kernel can have a basic function test to avoid the kernel regression during the udpate.
3. We can introduce more functional or performance tests to align the result together, it will benifit power and performance scale optimization.

Quoted 17 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +17 -0
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "../../kselftest_module.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/amd-pstate.h>
+
+#include <acpi/cppc_acpi.h>
+
+/*
+ * Abbreviations:
+ * aput: used as a shortform for AMD P-State unit test.

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 35

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+ * It helps to keep variable names smaller, simpler
+*/
+
+KSTM_MODULE_GLOBALS();
+
+/*
+ * Kernel module for testing the AMD P-State unit test
+ */
+enum aput_result {
+	APUT_RESULT_PASS,	//0

Let's remove "//" in the comments at whole series.

https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting

Quoted 29 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +29 -0
+	APUT_RESULT_FAIL,	//
+	MAX_APUT_RESULT,
+};
+
+struct aput_struct {
+	const char *name;
+	void (*func)(u32 index);
+	enum aput_result result;
+};
+
+static void aput_x86_vendor(u32 index);
+static void aput_acpi_cpc(u32 index);
+static void aput_modprobed_driver(u32 index);
+static void aput_capability_check(u32 index);
+static void aput_enable(u32 index);
+static void aput_init_perf(u32 index);
+static void aput_support_boost(u32 index);
+
+static struct aput_struct aput_cases[] = {
+	{"x86_vendor",          aput_x86_vendor          },
+	{"acpi_cpc_valid",      aput_acpi_cpc            },
+	{"modprobed_driver",    aput_modprobed_driver    },
+	{"capability_check",    aput_capability_check    },
+	{"enable",              aput_enable              },
+	{"init_perf",           aput_init_perf           },
+	{"support_boost",       aput_support_boost       }
+};
+
+static bool get_shared_mem(void)

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 74

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+{
+	bool result = false;
+	char buf[5] = {0};
+	struct file *filp = NULL;
+	loff_t pos = 0;
+	ssize_t ret;
+
+	filp = filp_open("/sys/module/amd_pstate/parameters/shared_mem", FMODE_PREAD, 0);
+	if (IS_ERR(filp))
+	{

We need use

if () {
}

instead of

if ()
{
}

Please use the checkpatch.pl to check your patches.

Quoted 63 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +63 -0
+		pr_err("%s Open param file fail! \n", __func__);
+	}
+	else
+	{
+		ret = kernel_read(filp, &buf, sizeof(buf), &pos);
+		if (ret < 0)
+		{
+			pr_err("%s ret=%ld unable to read from param file! \n", __func__, ret);
+		}
+		filp_close(filp, NULL);
+	}
+
+	if ('Y' == *buf)
+	{
+		result = true;
+	}
+
+	return (result);
+}
+
+static void aput_x86_vendor(u32 index)
+{
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_acpi_cpc(u32 index)
+{
+	if (acpi_cpc_valid())
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_modprobed_driver(u32 index)
+{
+	if (cpufreq_get_current_driver())
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_capability_check(u32 index)
+{
+	if (boot_cpu_has(X86_FEATURE_CPPC))
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 147

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+	{
+		//shared memory
+		if (get_shared_mem())
+		{
+			aput_cases[index].result = APUT_RESULT_PASS;
+		}
+		else
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+		}

I am thinking if the share_mem is not 1, system will fall back to acpi-cpufreq. And won't modprobe the amd-pstate module. Is this duplicate with above modprobed test?

Quoted 29 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +29 -0
+	}
+}
+
+static void aput_pstate_enable(u32 index)
+{
+	int ret = 0;
+	u64 cppc_enable = 0;
+
+	ret = rdmsrl_safe(MSR_AMD_CPPC_ENABLE, &cppc_enable);
+	if (ret)
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+		pr_err("%s rdmsrl_safe MSR_AMD_CPPC_ENABLE ret=%d is error! \n", __func__, ret);
+		return;
+	}
+	if (cppc_enable)
+	{
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_cases[index].result = APUT_RESULT_FAIL;
+	}
+}
+
+static void aput_enable(u32 index)
+{
+	if (get_shared_mem())
+	{

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 186

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+		//not check
+		aput_cases[index].result = APUT_RESULT_PASS;
+	}
+	else
+	{
+		aput_pstate_enable(index);
+	}
+}
+
+static void aput_init_perf(u32 index)

For this test, we should check if the each performance values are reasonable.

E.X:

highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0

Do we need a similar checking for the CPU frequencies?

Quoted 63 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +63 -0
+{
+	int cpu = 0, ret = 0;
+	u32 highest_perf = 0, nominal_perf = 0, lowest_nonlinear_perf = 0, lowest_perf = 0;
+	u64 cap1 = 0;
+	struct cppc_perf_caps cppc_perf;
+	struct cpufreq_policy *policy = NULL;
+        struct amd_cpudata *cpudata = NULL;
+
+	//get perf
+	highest_perf = amd_get_highest_perf();
+
+	for_each_possible_cpu(cpu)
+	{
+		//get amd cpudata
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			break;
+		cpudata = policy->driver_data;
+
+		if (get_shared_mem())
+		{
+			ret = cppc_get_perf_caps(cpu, &cppc_perf);
+			if (ret)
+			{
+				aput_cases[index].result = APUT_RESULT_FAIL;
+				pr_err("%s cppc_get_perf_caps ret=%d is error! \n", __func__, ret);
+				return;
+			}
+
+			nominal_perf = cppc_perf.nominal_perf;
+			lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf;
+			lowest_perf = cppc_perf.lowest_perf;
+		}
+		else
+		{
+			ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1);
+			if (ret)
+			{
+				aput_cases[index].result = APUT_RESULT_FAIL;
+				pr_err("%s rdmsrl_safe_on_cpu MSR_AMD_CPPC_CAP1 ret=%d is error! \n", __func__, ret);
+				return;
+			}
+
+			//get perf from MSR
+			nominal_perf = AMD_CPPC_NOMINAL_PERF(cap1);
+			lowest_nonlinear_perf = AMD_CPPC_LOWNONLIN_PERF(cap1);
+			lowest_perf = AMD_CPPC_LOWEST_PERF(cap1);
+		}
+
+		//check highest_perf,nominal_perf,lowest_nonlinear_perf
+		if ((highest_perf != READ_ONCE(cpudata->highest_perf)) ||
+			(nominal_perf != READ_ONCE(cpudata->nominal_perf)) ||
+			(lowest_nonlinear_perf != READ_ONCE(cpudata->lowest_nonlinear_perf)) ||
+			(lowest_perf != READ_ONCE(cpudata->lowest_perf)))
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+			pr_err("%s cpu%d highest_perf=%d %d nominal_perf=%d %d lowest_nonlinear_perf=%d %d lowest_perf=%d %d are not equal! \n",
+				__func__, cpu, highest_perf, cpudata->highest_perf,
+				nominal_perf, cpudata->nominal_perf,
+				lowest_nonlinear_perf, cpudata->lowest_nonlinear_perf,
+				lowest_perf, cpudata->lowest_perf);
+			return;
+		}

tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c line 259

Quoted 10 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +10 -0
+	}
+
+	aput_cases[index].result = APUT_RESULT_PASS;
+}
+
+static void aput_support_boost(u32 index)
+{
+	int cpu = 0;
+	struct cpufreq_policy *policy = NULL;
+        struct amd_cpudata *cpudata = NULL;

Please align the space in this line.

Thanks,
Ray

Quoted 46 lines
tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c new file +43 -0
+
+	for_each_possible_cpu(cpu)
+	{
+		//get amd cpudata
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			break;
+		cpudata = policy->driver_data;
+
+		if (READ_ONCE(cpudata->boost_supported))
+		{
+			aput_cases[index].result = APUT_RESULT_PASS;
+		}
+		else
+		{
+			aput_cases[index].result = APUT_RESULT_FAIL;
+			break;
+		}
+	}
+}
+
+static void aput_do_test_case(void)
+{
+	u32 i=0, arr_size = ARRAY_SIZE(aput_cases);
+
+	for (i = 0; i < arr_size; i++)
+	{
+		pr_info("****** Begin %-5d\t %-20s\t ******\n", i+1, aput_cases[i].name);
+		aput_cases[i].func(i);
+		KSTM_CHECK_ZERO(aput_cases[i].result);
+		pr_info("****** End   %-5d\t %-20s\t ******\n", i+1, aput_cases[i].name);
+	}
+}
+
+static void __init selftest(void)
+{
+	aput_do_test_case();
+}
+
+KSTM_MODULE_LOADERS(amd_pstate_testmod);
+MODULE_AUTHOR("Meng Li <[email protected]>");
+MODULE_DESCRIPTION("Unit test for AMD P-state driver");
+MODULE_LICENSE("GPL");
Signature · 1 line
2.25.1
#8 lore raw
In reply to Meng Li
Quoted 35 lines · Meng Li

Hi all:

AMD P-State unit test(amd_pstate_testmod) is a kernel module for testing the functions of amd-pstate driver.
It could import as a module to launch some test tasks.

We upstream out AMD P-state driver into Linux kernel and use this unit test module to verify the required conditions and basic functions of amd-pstate before integration test.

We use test module in the kselftest frameworks to implement it. We create amd_pstate_testmod module and tie it into kselftest.

For exmaple: The test case aput_acpi_cpc is used to check whether the _CPC object is exist in SBIOS.
The amd-pstate initialization will fail if the _CPC in ACPI SBIOS is not existed at the detected processor, so it is a necessary condition.

At present, its test cases are very simple, and the corresponding test cases will continue to be added later to improve the test coverage.

See patch series in below git repo:
V1: https://lore.kernel.org/linux-pm/[email protected]/

Changes from V1 -> V2:
- cpufreq: amd-pstate:
- - add a trailing of amd-pstate.h to MAINTAINER AMD PSTATE DRIVER
- selftests: cpufreq
- - add a wrapper shell script for the amd_pstate_testmod module
- selftests: cpufreq:
- - remove amd_pstate_testmod kernel module to .../cpufreq/amd_pstate_testmod
- Documentation: amd-pstate:
- - amd_pstate_testmod rst document is not provided at present.

Quoted 5 lines

Thanks,
Jasmine

Meng Li (3):
cpufreq: amd-pstate: Expose struct amd_cpudata

Please collect an ACK from Ray for this one as per MAINTAINERS and I will leave the series to Shuah as it is selftests mostly.

Thanks!

Quoted 20 lines

selftests: cpufreq: Add wapper script for test AMD P-State
selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

 MAINTAINERS                                   |   1 +
 drivers/cpufreq/amd-pstate.c                  |  60 +---
 include/linux/amd-pstate.h                    |  74 +++++
 tools/testing/selftests/cpufreq/Makefile      |   2 +-
 .../selftests/cpufreq/amd_pstate_testmod.sh   |   4 +
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 tools/testing/selftests/cpufreq/config        |   1 +
 8 files changed, 404 insertions(+), 60 deletions(-)
 create mode 100644 include/linux/amd-pstate.h
 create mode 100755 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c

--
2.25.1

maintainer
#9 lore raw
Quoted 39 lines · Rafael J. Wysocki
Quoted 38 lines · Meng Li

Hi all:

AMD P-State unit test(amd_pstate_testmod) is a kernel module for testing the functions of amd-pstate driver.
It could import as a module to launch some test tasks.

We upstream out AMD P-state driver into Linux kernel and use this unit test module to verify the required conditions and basic functions of amd-pstate before integration test.

We use test module in the kselftest frameworks to implement it. We create amd_pstate_testmod module and tie it into kselftest.

For exmaple: The test case aput_acpi_cpc is used to check whether the _CPC object is exist in SBIOS.
The amd-pstate initialization will fail if the _CPC in ACPI SBIOS is not existed at the detected processor, so it is a necessary condition.

At present, its test cases are very simple, and the corresponding test cases will continue to be added later to improve the test coverage.

See patch series in below git repo:
V1: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flinux-pm%2F20220323071502.2674156-1-li.meng%40amd.com%2F&amp;data=04%7C01%7Cray.huang%40amd.com%7C7a5d4998e2ca413a215b08da1d6425e4%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637854613222577975%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=8fAzN5hea4sVO5E7%2B9Uh9VSsyt29gM2%2FCkMXHS0%2FfP4%3D&amp;reserved=0

Changes from V1 -> V2:
- cpufreq: amd-pstate:
- - add a trailing of amd-pstate.h to MAINTAINER AMD PSTATE DRIVER
- selftests: cpufreq
- - add a wrapper shell script for the amd_pstate_testmod module
- selftests: cpufreq:
- - remove amd_pstate_testmod kernel module to .../cpufreq/amd_pstate_testmod
- Documentation: amd-pstate:
- - amd_pstate_testmod rst document is not provided at present.

Thanks,
Jasmine

Quoted 8 lines
Quoted 2 lines

Meng Li (3):
cpufreq: amd-pstate: Expose struct amd_cpudata

Please collect an ACK from Ray for this one as per MAINTAINERS and I will leave the series to Shuah as it is selftests mostly.

Thanks!

Thanks, Rafael!

Jassmine, I think you can mark all patches as "v2" not only the cover letter. Then we can separate these series easily.

Thanks,
Ray

Quoted 20 lines
Quoted 20 lines

selftests: cpufreq: Add wapper script for test AMD P-State
selftests: cpufreq: Add amd_pstate_testmod kernel module for testing

 MAINTAINERS                                   |   1 +
 drivers/cpufreq/amd-pstate.c                  |  60 +---
 include/linux/amd-pstate.h                    |  74 +++++
 tools/testing/selftests/cpufreq/Makefile      |   2 +-
 .../selftests/cpufreq/amd_pstate_testmod.sh   |   4 +
 .../cpufreq/amd_pstate_testmod/Makefile       |  20 ++
 .../amd_pstate_testmod/amd_pstate_testmod.c   | 302 ++++++++++++++++++
 tools/testing/selftests/cpufreq/config        |   1 +
 8 files changed, 404 insertions(+), 60 deletions(-)
 create mode 100644 include/linux/amd-pstate.h
 create mode 100755 tools/testing/selftests/cpufreq/amd_pstate_testmod.sh
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/Makefile
 create mode 100644 tools/testing/selftests/cpufreq/amd_pstate_testmod/amd_pstate_testmod.c

--
2.25.1