Skip to contentSkip to conversation

arm64: dts: Add i.MX8DXL initial support

PATCH Superseded Abel Vesa 3 participants 22 messages Apr 13, 2022 – Apr 18, 2022

Subsystems (8)

v6 of 9 Superseded Latest is v9 →

lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

v6 cover arm64: dts: Add i.MX8DXL initial support

Changes since v5:
* dropped clk_csr from bindings docs and devicetree node
* added bindings docs for EVK board, ocotp, scu-pd, eshc, fec mxs-usb-phy, ci-hdrc-usb2 and usbmisc
* the fsl,imx8dxl-db-pmu compatible will be documented once the driver will be sent upstream

Abel Vesa (8):
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: fsl: scu: Add i.MX8DXL ocotp and scu-pd binding
dt-bindings: arm: Document i.MX8DXL EVK board binding
dt-bindings: mmc: imx-esdhc: Add i.MX8DXL compatible string
dt-bindings: net: fec: Add i.MX8DXL compatible string
dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string
dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string
dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string

Jacky Bai (5):
arm64: dts: freescale: Add the top level dtsi support for imx8dxl
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: freescale: Add i.MX8DXL evk board support

 .../bindings/arm/freescale/fsl,scu.txt        |   4 +-
 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
 .../devicetree/bindings/net/fsl,fec.yaml      |   4 +
 .../devicetree/bindings/phy/mxs-usb-phy.txt   |   1 +
 .../devicetree/bindings/usb/ci-hdrc-usb2.txt  |   1 +
 .../devicetree/bindings/usb/usbmisc-imx.txt   |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   |  52 ++++
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 134 +++++++++
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    |  36 +++
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  78 +++++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi    | 241 ++++++++++++++++
 14 files changed, 826 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

--
2.34.1

author
#1 lore raw

PATCH v6 1/13 arm64: dts: freescale: Add the top level dtsi support for imx8dxl

From: Jacky Bai <[email protected]>

The i.MX8DXL is a device targeting the automotive and industrial market segments. The flexibility of the architecture allows for use in a wide variety of general embedded applications. The chip is designed to achieve both high performance and low power consumption. The chip relies on the power efficient dual (2x) Cortex-A35 cluster.

Add the reserved memory node property for dsp reserved memory, the wakeup-irq property for SCU node, the rpmsg and the cm4 rproc support.

---
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 241 +++++++++++++++++++++
 1 file changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
arch/arm64/boot/dts/freescale/imx8dxl.dtsi new file +241 -0
new file mode 100644
index 000000000000..716caac1cfe7
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mu1 = &lsio_mu1;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 cluster with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: imx8dxl-pd {
+			compatible = "fsl,imx8dxl-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+			clocks = <&xtal32k &xtal24m>;
+			clock-names = "xtal_32KHz", "xtal_24Mhz";
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: imx8qx-ocotp {
+			compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
Signature · 1 line
2.34.1
author
#2 lore raw

PATCH v6 2/13 arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl

In reply to Abel Vesa

Override the I2Cs, LPUARTs, audio_ipg_clk and dma_ipg_clk with the i.MX8DXL specific properties.

---
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi new file +52 -0
new file mode 100644
index 000000000000..4d0c75bad74c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.1
author
#3 lore raw

PATCH v6 3/13 arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG, 1x eMMC, 2x SD, 1x NAND.

---
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +134 -0
new file mode 100644
index 000000000000..b776d0ed42b4
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
+			 <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_3>,
+			 <&eqos_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clock
+		 * scfw disable clock access and keep it always on
+		 * in case other core (M4) use one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		#stream-id-cells = <1>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@0x5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+	};
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH v6 03/13] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi

Quoted 8 lines · Abel Vesa

From: Jacky Bai <[email protected]>

On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG, 1x eMMC, 2x SD, 1x NAND.

I got following warning with 'W=1' build flag.

../arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi:10.45-15.4: Warning (simple_bus_reg): /bus@5b000000/clock-conn-enet0-root: missing or empty reg/ranges property ../arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi:63.29-68.4: Warning (simple_bus_reg): /bus@5b000000/usbphy@0x5b110000: simple-bus unit address format error, expected "5b110000" ../arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi:7.27-12.4: Warning (simple_bus_reg): /bus@5c000000/clock-db-ipg: missing or empty reg/ranges property

Shawn

Quoted 53 lines
---
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +42 -0
new file mode 100644
index 000000000000..b776d0ed42b4
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
+			 <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_3>,
+			 <&eqos_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;

arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi line 52

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +10 -0
+		/*
+		 * usbotg1 and usbotg2 share one clock
+		 * scfw disable clock access and keep it always on
+		 * in case other core (M4) use one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		#stream-id-cells = <1>;

Where do I find bindings for this property?

Shawn

Quoted 85 lines
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +82 -0
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@0x5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+	};
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author
#5 lore raw

PATCH v6 4/13 arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

Add the ddr subsys dtsi for i.MX8DXL. Additional db pmu is added compared to i.MX8QXP.

---
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi new file +36 -0
new file mode 100644
index 000000000000..75b482966d94
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+&ddr_subsys {
+	db_ipg_clk: clock-db-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <456000000>;
+		clock-output-names = "db_ipg_clk";
+	};
+
+	db_pmu0: db-pmu@5ca40000 {
+		compatible = "fsl,imx8dxl-db-pmu";
+		reg = <0x5ca40000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&db_pmu0_lpcg IMX_LPCG_CLK_0>,
+			 <&db_pmu0_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "ipg", "cnt";
+		power-domains = <&pd IMX_SC_R_PERF>;
+	};
+
+	db_pmu0_lpcg: clock-controller@5cae0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5cae0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&db_ipg_clk>, <&db_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_1>;
+		clock-output-names = "perf_lpcg_cnt_clk",
+				     "perf_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_PERF>;
+	};
+};
Signature · 1 line
2.34.1
author
#6 lore raw

PATCH v6 5/13 arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

On i.MX8DXL, the LSIO subsystem includes below devices:

1x Inline Encryption Engine (IEE)
1x FlexSPI
4x Pulse Width Modulator (PWM)
5x General Purpose Timer (GPT)
8x GPIO
14x Message Unit (MU)
256KB On-Chip Memory (OCRAM)

compared to the common imx8-ss-lsio dtsi, some nodes' interrupt property need to be updated.

---
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi new file +78 -0
new file mode 100644
index 000000000000..6aec2ec3a848
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+};
Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v6 6/13 arm64: dts: freescale: Add i.MX8DXL evk board support

In reply to Abel Vesa

From: Jacky Bai <[email protected]>

Add i.MX8DXL EVK board support.

---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++
 2 files changed, 267 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
index 85c2c9ba5110..d6be4e8ff3c2 100644
@@ -98,6 +98,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +266 -0

266 lines not on this page · raw message

Signature · 1 line
2.34.1
#8 lore raw

Re: [PATCH v6 06/13] arm64: dts: freescale: Add i.MX8DXL evk board support

Quoted 17 lines · Abel Vesa

From: Jacky Bai <[email protected]>

Add i.MX8DXL EVK board support.

---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++
 2 files changed, 267 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
arch/arm64/boot/dts/freescale/Makefile +0 -0
index 85c2c9ba5110..d6be4e8ff3c2 100644

arch/arm64/boot/dts/freescale/Makefile dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb · line 101

Quoted 4 lines
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -98,6 +98,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb

Out of alphabetical order.

Quoted 82 lines
arch/arm64/boot/dts/freescale/Makefile +0 -0
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +73 -0
new file mode 100644
index 000000000000..68dfe722af6d
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXL EVK";
+	compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		m4_reserved: m4@88000000 {
+			no-map;
+			reg = <0 0x88000000 0 0x8000000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x14000000>;
+			alloc-ranges = <0 0x98000000 0 0x14000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <3480>;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lsio_gpio4 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/imx8dxl-evk.dts line 83

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +10 -0
+
+&lsio_gpio5 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal0 {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;

Newline between properties and child node.

arch/arm64/boot/dts/freescale/imx8dxl-evk.dts line 89

Quoted 6 lines
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +6 -0
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};

Newline between nodes.

Quoted 17 lines
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +17 -0
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+

arch/arm64/boot/dts/freescale/imx8dxl-evk.dts line 116

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +10 -0
+&usdhc1 {
+		pinctrl-names = "default", "state_100mhz", "state_200mhz";
+		pinctrl-0 = <&pinctrl_usdhc1>;
+		pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+		pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+		bus-width = <8>;
+		no-sd;
+		no-sdio;
+		non-removable;
+		status = "okay";

One level indent is good enough.

Shawn

Quoted 153 lines
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +150 -0
+};
+
+&usdhc2 {
+		pinctrl-names = "default", "state_100mhz", "state_200mhz";
+		pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+		pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+		pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+		bus-width = <4>;
+		vmmc-supply = <&reg_usdhc2_vmmc>;
+		cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+		wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+		max-frequency = <100000000>;
+		status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD	0x000014a0
+			IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1		0x0600004c
+			IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN	0x0600004c
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA		0x06000021
+			IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA		0x06000021
+			IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8DXL_UART0_RX_ADMA_UART0_RX		0x06000020
+			IMX8DXL_UART0_TX_ADMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8DXL_UART1_TX_ADMA_UART1_TX          0x06000020
+			IMX8DXL_UART1_RX_ADMA_UART1_RX          0x06000020
+			IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B    0x06000020
+			IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B    0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x00000040 /* RESET_B */
+			IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x00000021 /* WP */
+			IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x00000021 /* CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+};
Signature · 1 line
2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author
#9 lore raw

PATCH v6 7/13 dt-bindings: fsl: scu: Add i.MX8DXL ocotp and scu-pd binding

In reply to Abel Vesa

Add i.MX8DXL ocotp and scu-pd compatibles to the SCU bindings documentation.

dt-bindings: fsl: scu: Add i.MX8DXL scu-pd binding

Add i.MX8DXL scu-pd compatible to the SCU bindings documentation.

---
 Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +3 -1
index a87ec15e28d2..27a2d9c45b0b 100644
@@ -70,6 +70,7 @@ domain binding[2].
 
 Required properties:
 - compatible:		Should be one of:
+			  "fsl,imx8dxl-scu-pd",
 			  "fsl,imx8qm-scu-pd",
 			  "fsl,imx8qxp-scu-pd"
 			followed by "fsl,scu-pd"
@@ -142,7 +143,8 @@ OCOTP bindings based on SCU Message Protocol
 Required properties:
 - compatible:		Should be one of:
 			"fsl,imx8qm-scu-ocotp",
-			"fsl,imx8qxp-scu-ocotp".
+			"fsl,imx8qxp-scu-ocotp",
+			"fsl,imx8dxl-scu-ocotp".
 - #address-cells:	Must be 1. Contains byte index
 - #size-cells:		Must be 1. Contains byte length
 
Signature · 1 line
2.34.1
author
#10 lore raw

PATCH v6 8/13 dt-bindings: arm: Document i.MX8DXL EVK board binding

In reply to Abel Vesa

Document devicetree binding of i.XM8DXL EVK board.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +7 -0
index b6cc34115362..c44ce1f6fb98 100644
@@ -803,6 +803,13 @@ properties:
               - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
           - const: fsl,imx7ulp
 
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL Evaluation Kit
+          - const: fsl,imx8dxl
+
+
       - description: i.MX8MM based Boards
         items:
           - enum:
Signature · 1 line
2.34.1
maintainer
#11 lore raw

Re: [PATCH v6 08/13] dt-bindings: arm: Document i.MX8DXL EVK board binding

Quoted 12 lines · Abel Vesa

Document devicetree binding of i.XM8DXL EVK board.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
index b6cc34115362..c44ce1f6fb98 100644

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 812

Quoted 10 lines
Documentation/devicetree/bindings/arm/fsl.yaml +7 -0
@@ -803,6 +803,13 @@ properties:
               - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
           - const: fsl,imx7ulp
 
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL Evaluation Kit
+          - const: fsl,imx8dxl
+
+

Extra blank line

Quoted 7 lines
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
       - description: i.MX8MM based Boards
         items:
           - enum:
Signature · 1 line
2.34.1
author
#12 lore raw

PATCH v6 9/13 dt-bindings: mmc: imx-esdhc: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.

---
 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +1 -0
index 7dbbcae9485c..f2e3b1e0206f 100644
@@ -38,6 +38,7 @@ properties:
           - nxp,s32g2-usdhc
       - items:
           - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8mm-usdhc
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
Signature · 1 line
2.34.1
maintainer Acked-by on v6 9/13
#13 lore raw

Re: [PATCH v6 09/13] dt-bindings: mmc: imx-esdhc: Add i.MX8DXL compatible string

Quoted 7 lines · Abel Vesa

Add i.MX8DXL compatible string. It also needs "fsl,imx8qm-fec" compatible.

---
 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 +
 1 file changed, 1 insertion(+)
author
#14 lore raw

PATCH v6 10/13 dt-bindings: net: fec: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add the i.MX8DXL compatible string for FEC. It also uses "fsl,imx8qm-fec".

---
 Documentation/devicetree/bindings/net/fsl,fec.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/net/fsl,fec.yaml +4 -0
index daa2f79a294f..92654823f3dd 100644
@@ -58,6 +58,10 @@ properties:
               - fsl,imx8qxp-fec
           - const: fsl,imx8qm-fec
           - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8dxl-fec
+          - const: fsl,imx8qm-fec
 
   reg:
     maxItems: 1
Signature · 1 line
2.34.1
maintainer Acked-by on v6 10/13
#15 lore raw

Re: [PATCH v6 10/13] dt-bindings: net: fec: Add i.MX8DXL compatible string

Quoted 8 lines · Abel Vesa

Add the i.MX8DXL compatible string for FEC. It also uses "fsl,imx8qm-fec".

---
 Documentation/devicetree/bindings/net/fsl,fec.yaml | 4 ++++
 1 file changed, 4 insertions(+)
author
#16 lore raw

PATCH v6 11/13 dt-bindings: phy: mxs-usb-phy: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add compatible for i.MX8DXL USB PHY.

---
 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +1 -0
index c9f5c0caf8a9..c9e392c64a7c 100644
@@ -8,6 +8,7 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
Signature · 1 line
2.34.1
author
#18 lore raw

PATCH v6 12/13 dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to ci-hdrc-usb2 bindings documentation.

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +1 -0
index a5c5db6a0b2d..c650efc47e92 100644
@@ -11,6 +11,7 @@ Required properties:
 	"fsl,imx6ul-usb"
 	"fsl,imx7d-usb"
 	"fsl,imx7ulp-usb"
+	"fsl,imx8dxl-usb"
 	"lsi,zevio-usb"
 	"qcom,ci-hdrc"
 	"chipidea,usb2"
Signature · 1 line
2.34.1
maintainer Acked-by on v6 12/13
#19 lore raw

Re: [PATCH v6 12/13] dt-bindings: usb: ci-hdrc-usb2: Add i.MX8DXL compatible string

Quoted 8 lines · Abel Vesa

Add i.MX8DXL compatible string to ci-hdrc-usb2 bindings documentation.

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)
author
#20 lore raw

PATCH v6 13/13 dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string

In reply to Abel Vesa

Add i.MX8DXL compatible string to the usbmisc-imx bindings.

---
 Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/usbmisc-imx.txt +1 -0
index b796836d2ce7..6bebb7071c4f 100644
@@ -8,6 +8,7 @@ Required properties:
 	"fsl,imx6sx-usbmisc" for imx6sx
 	"fsl,imx7d-usbmisc" for imx7d
 	"fsl,imx7ulp-usbmisc" for imx7ulp
+	"fsl,imx8dxl-usbmisc" for imx8dxl
 - reg: Should contain registers location and length
 
 Examples:
Signature · 1 line
2.34.1
maintainer Acked-by on v6 13/13
#21 lore raw

Re: [PATCH v6 13/13] dt-bindings: usb: usbmisc-imx: Add i.MX8DXL compatible string

Quoted 7 lines · Abel Vesa

Add i.MX8DXL compatible string to the usbmisc-imx bindings.

---
 Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 +
 1 file changed, 1 insertion(+)