Raspberry Pi Sense HAT driver
Subsystems (6)
v9 cover Raspberry Pi Sense HAT driver
This patch series adds a set of drivers for operating the Sense HAT peripheral device. This board is an add on for the Raspberry Pi that is designed to connect using the GPIO connector and communicate via I2C.
It features:
- a joystick
- an 8x8 RGB LED matrix display
- a whole bunch of environmental sensors with their own drivers (those are already in upstream Linux)
This is a refactor of the work of Serge Schneider, the author of a version of this driver that is currently in the Raspberry Pi downstream kernel. We modified his code to make it suitable for upstream Linux.
A couple of tests are available for the driver in the test folder in this repo: https://github.com/underground-software/sensehat.git
- sensehat_joystick_test logs the input events from the joystick to the console
- sensehat_display_test displays various solid colors on the LED panel.
- full_sensehat_test displays a single lit cell that can be moved with the joystick. Pressing the joystick ends the program.
For more information about the Sense HAT, visit:
https://www.raspberrypi.org/products/sense-hat/
Changes since v8:
- Fixed a few small things in the device tree bindings. I forgot to include the fact that Rob Herring had already reviewed them when I posted v8, so Krzysztof Kozlowski jumped in and offered his input. The suggestions were good so we decided to include them. Sorry for the confusion.
- Corrected a typo in the description of the display driver. The format of the special file used by the driver was changed in v8 and this was described in the cover letter of the patch, but not in the actual note attached to that patch. This is now fixed.
Charles Mirabile (6):
drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick
driver
drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver
dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema
MAINTAINERS: Add sensehat driver authors to MAINTAINERS DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
.../raspberrypi,sensehat-display.yaml | 27 +++ .../input/raspberrypi,sensehat-joystick.yaml | 32 +++ .../bindings/mfd/raspberrypi,sensehat.yaml | 58 +++++ MAINTAINERS | 11 + drivers/auxdisplay/Kconfig | 8 + drivers/auxdisplay/Makefile | 1 + drivers/auxdisplay/sensehat-display.c | 205 ++++++++++++++++++ drivers/input/joystick/Kconfig | 11 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/sensehat-joystick.c | 137 ++++++++++++ drivers/mfd/simple-mfd-i2c.c | 1 + sensehat.dtbs | 52 +++++ 12 files changed, 544 insertions(+) create mode 100644 Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml create mode 100644 Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml create mode 100644 drivers/auxdisplay/sensehat-display.c create mode 100644 drivers/input/joystick/sensehat-joystick.c create mode 100644 sensehat.dtbs
Signature · 1 line
2.31.1
PATCH v9 1/6 drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c
This patch adds the compatible string for the Sense HAT device to the list of compatible strings in the simple_mfd_i2c driver so that it can match against the device and load its children and their drivers
--- drivers/mfd/simple-mfd-i2c.c | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/simple-mfd-i2c.c +1 -0
@@ -75,6 +75,7 @@ static const struct simple_mfd_data silergy_sy7636a = {static const struct of_device_id simple_mfd_i2c_of_match[] = { { .compatible ="kontron,sl28cpld" }, { .compatible ="silergy,sy7636a" , .data = &silergy_sy7636a}, + { .compatible ="raspberrypi,sensehat" }, {} };MODULE_DEVICE_TABLE (of, simple_mfd_i2c_of_match);
Signature · 1 line
2.31.1
PATCH v9 2/6 drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver
In reply to Charles MirabileThis patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD key events when moved in any of the four directions and the BTN_SELECT event when depressed.
--- drivers/input/joystick/Kconfig | 11 ++ drivers/input/joystick/Makefile | 1 + drivers/input/joystick/sensehat-joystick.c | 137 +++++++++++++++++++++ 3 files changed, 149 insertions(+) create mode 100644 drivers/input/joystick/sensehat-joystick.c
drivers/input/joystick/Kconfig +11 -0
@@ -399,4 +399,15 @@ config JOYSTICK_N64 Say Y here if you want enable support for the four built-in controller ports on the Nintendo 64 console. +config JOYSTICK_SENSEHAT + tristate "Raspberry Pi Sense HAT joystick" + depends on INPUT && I2C + select MFD_SIMPLE_MFD_I2C + help + Say Y here if you want to enable the driver for the + the Raspberry Pi Sense HAT. + + To compile this driver as a module, choose M here: the + module will be called sensehat_joystick. + endif
drivers/input/joystick/Makefile +1 -0
@@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64) += n64joy.o obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o obj-$(CONFIG_JOYSTICK_QWIIC) += qwiic-joystick.o +obj-$(CONFIG_JOYSTICK_SENSEHAT) += sensehat-joystick.o obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o
drivers/input/joystick/sensehat-joystick.c new file +137 -0
137 lines not on this page · raw message
Signature · 1 line
2.31.1
Re: [PATCH v9 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver
Hi--
drivers/input/joystick/Kconfig config JOYSTICK_N64 · line 405
Quoted 12 lines · Charles Mirabile
drivers/input/joystick/Kconfig +4
-0@@ -399,4 +399,15 @@ config JOYSTICK_N64 Say Y here if you want enable support for the four built-in controller ports on the Nintendo 64 console. +config JOYSTICK_SENSEHAT + tristate "Raspberry Pi Sense HAT joystick" + depends on INPUT && I2C + select MFD_SIMPLE_MFD_I2C
Looks like this also needs
depends on HAS_IOMEM
since everything in drivers/mfd/Kconfig depends on HAS_IOMEM and since this 'select' causes a kconfig warning when HAS_IOMEM is not set:
WARNING: unmet direct dependencies detected for MFD_SIMPLE_MFD_I2C
Depends on [n]: HAS_IOMEM [=n] && I2C [=y]
Selected by [y]:
- JOYSTICK_SENSEHAT [=y] && INPUT_JOYSTICK [=y] && INPUT [=y] && I2C [=y]
drivers/input/joystick/Kconfig config JOYSTICK_N64 · line 413
Quoted 8 lines
drivers/input/joystick/Kconfig +7
-0+ help + Say Y here if you want to enable the driver for the + the Raspberry Pi Sense HAT. + + To compile this driver as a module, choose M here: the + module will be called sensehat_joystick. + endif
Thanks.
Dmitry Torokhov
maintainerRe: [PATCH v9 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver
Hi Randy,
Quoted 19 lines · Randy Dunlap
Hi--
drivers/input/joystick/Kconfig config JOYSTICK_N64 · line 405
Quoted 12 lines · Charles Mirabile
drivers/input/joystick/Kconfig +4
-0@@ -399,4 +399,15 @@ config JOYSTICK_N64 Say Y here if you want enable support for the four built-in controller ports on the Nintendo 64 console. +config JOYSTICK_SENSEHAT + tristate "Raspberry Pi Sense HAT joystick" + depends on INPUT && I2C + select MFD_SIMPLE_MFD_I2CLooks like this also needs
depends onHAS_IOMEM
Quoted 7 lines
since everything in
drivers/mfd/Kconfigdepends onHAS_IOMEMand since this 'select' causes a kconfig warning whenHAS_IOMEMis not set:WARNING: unmet direct dependencies detected for
MFD_SIMPLE_MFD_I2C
Depends on [n]:HAS_IOMEM[=n] && I2C [=y]
Selected by [y]:
-JOYSTICK_SENSEHAT[=y] &&INPUT_JOYSTICK[=y] && INPUT [=y] && I2C [=y]
Do you mind sending a patch?
Thanks.
Signature · 1 line
Dmitry
Re: [PATCH v9 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver
Quoted 25 lines · Dmitry Torokhov
Hi Randy,
Quoted 22 lines · Randy Dunlap
Hi--
drivers/input/joystick/Kconfig config JOYSTICK_N64 · line 405
Quoted 12 lines · Charles Mirabile
drivers/input/joystick/Kconfig +4
-0@@ -399,4 +399,15 @@ config JOYSTICK_N64 Say Y here if you want enable support for the four built-in controller ports on the Nintendo 64 console. +config JOYSTICK_SENSEHAT + tristate "Raspberry Pi Sense HAT joystick" + depends on INPUT && I2C + select MFD_SIMPLE_MFD_I2CLooks like this also needs
depends onHAS_IOMEMsince everything in
drivers/mfd/Kconfigdepends onHAS_IOMEMand since this 'select' causes a kconfig warning whenHAS_IOMEMis not set:
Quoted 6 lines
Quoted 4 lines
WARNING: unmet direct dependencies detected for
MFD_SIMPLE_MFD_I2C
Depends on [n]:HAS_IOMEM[=n] && I2C [=y]
Selected by [y]:
-JOYSTICK_SENSEHAT[=y] &&INPUT_JOYSTICK[=y] && INPUT [=y] && I2C [=y]Do you mind sending a patch?
OK, will do.
Signature · 1 line
~Randy
PATCH v9 3/6 drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver
In reply to Charles MirabileThis patch adds the driver for the 8x8 RGB LED matrix display on the Sense HAT. It appears as a character device named sense-hat in /dev/. That special file is 192 bytes large and contains 64 RGB triplets (3 bytes each) one for each pixel in row major order.
--- drivers/auxdisplay/Kconfig | 8 + drivers/auxdisplay/Makefile | 1 + drivers/auxdisplay/sensehat-display.c | 205 ++++++++++++++++++++++++++ 3 files changed, 214 insertions(+) create mode 100644 drivers/auxdisplay/sensehat-display.c
drivers/auxdisplay/Kconfig +8 -0
@@ -203,6 +203,14 @@ config ARM_CHARLCD line and the Linux version on the second line, but that's still useful. +config SENSEHAT_DISPLAY + tristate "Raspberry Pi Sense HAT display driver" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This is a driver for the Raspberry Pi Sensehat 8x8 RBG-LED matrix + you can access it as a misc device at /dev/sense-hat + menuconfig PARPORT_PANEL tristate "Parallel port LCD/Keypad Panel support" depends on PARPORT
drivers/auxdisplay/Makefile +1 -0
@@ -14,3 +14,4 @@ obj-$(CONFIG_HT16K33) += ht16k33.o obj-$(CONFIG_PARPORT_PANEL) += panel.o obj-$(CONFIG_LCD2S) += lcd2s.o obj-$(CONFIG_LINEDISP) += line-display.o +obj-$(CONFIG_SENSEHAT_DISPLAY) += sensehat-display.o
drivers/auxdisplay/sensehat-display.c new file +205 -0
205 lines not on this page · raw message
Signature · 1 line
2.31.1
Re: [PATCH v9 3/6] drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver
Hi!
Quoted 4 lines
This patch adds the driver for the 8x8 RGB LED matrix display on the Sense HAT. It appears as a character device named sense-hat in
/dev/. That special file is 192 bytes large and contains 64 RGB triplets (3 bytes each) one for each pixel in row major order.
Is that right interface? Should we treat it as a tiny framebuffer, instead?
Best regards,
Pavel
Signature · 7 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v9 4/6 dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema
In reply to Charles MirabileThis patch adds the device tree bindings for the Sense HAT and each of its children devices in yaml form.
--- .../raspberrypi,sensehat-display.yaml | 27 +++++++++ .../input/raspberrypi,sensehat-joystick.yaml | 32 ++++++++++ .../bindings/mfd/raspberrypi,sensehat.yaml | 58 +++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml create mode 100644 Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml new file +27 -0
@@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/raspberrypi,sensehat-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi Sensehat Display + +maintainers: + - Charles Mirabile <[email protected]> + - Mwesigwa Guma <[email protected]> + - Joel Savitz <[email protected]> + +description: + This device is part of the sensehat multi function device. + For more information see ../mfd/raspberrypi,sensehat.yaml. + + This device features a programmable 8x8 RGB LED matrix. + +properties: + compatible: + const: raspberrypi,sensehat-display + +required: + - compatible + +additionalProperties: false
Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml new file +32 -0
@@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/raspberrypi,sensehat-joystick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi Sensehat Joystick + +maintainers: + - Charles Mirabile <[email protected]> + - Mwesigwa Guma <[email protected]> + - Joel Savitz <[email protected]> + +description: + This device is part of the sensehat multi function device. + For more information see ../mfd/raspberrypi,sensehat.yaml. + + This device features a five button joystick (up, down,left, + right, click) + +properties: + compatible: + const: raspberrypi,sensehat-joystick + + interrupts: + maxItems: 1 + +required: + - compatible + - interrupts + +additionalProperties: false
Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
2.31.1
Re: [PATCH v9 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema
Quoted 9 lines · Charles Mirabile
This patch adds the device tree bindings for the Sense HAT and each of its children devices in yaml form.
Co-developed-by Mwesigwa Guma <[email protected]>Signed-off-by Mwesigwa Guma <[email protected]>Co-developed-by Joel Savitz <[email protected]>Signed-off-by Joel Savitz <[email protected]>Signed-off-by Charles Mirabile <[email protected]>---
Best regards,
Krzysztof
PATCH v9 5/6 MAINTAINERS: Add sensehat driver authors to MAINTAINERS
In reply to Charles MirabileThis patch adds the driver authors to MAINAINERS.
--- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
@@ -17747,6 +17747,17 @@ F: Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2 F: Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml F: drivers/iio/chemical/sunrise_co2.c +SENSEHAT DRIVER +M: Charles Mirabile <[email protected]> +M: Mwesigwa Guma <[email protected]> +M: Joel Savitz <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/auxdisplay/raspberrypi,sensehat-display.yaml +F: Documentation/devicetree/bindings/input/raspberrypi,sensehat-joystick.yaml +F: Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml +F: drivers/auxdisplay/sensehat-display.c +F: drivers/input/joystick/sensehat-joystick.c + SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER M: Tomasz Duszynski <[email protected]> S: Maintained
Signature · 1 line
2.31.1
PATCH v9 6/6 DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
In reply to Charles MirabileThis patch shold not be merged - dtbs files are not stored in the kernel tree. We just provide this file so the code can be tested.
This overlay is suitable for testing the driver, it can be compiled with dtc and put in the /boot/overlays/ folder then specified in config.txt by putting the lines:
dtoverlay= #suppress loading of default overlay for HAT
dtoverlay=sensehat #load custom overlay
at the beginning before any other lines in config.txt
--- sensehat.dtbs | 52 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 sensehat.dtbs
sensehat.dtbs new file +52 -0
@@ -0,0 +1,52 @@ +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835"; +}; + +&i2c1 { + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "okay"; + + sensehat@46 { + compatible = "raspberrypi,sensehat"; + reg = <0x46>; + interrupt-parent = <&gpio>; + status = "okay"; + display { + compatible = "raspberrypi,sensehat-display"; + status = "okay"; + }; + joystick { + compatible = "raspberrypi,sensehat-joystick"; + interrupts = <23 1>; + status = "okay"; + }; + }; + + lsm9ds1-magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + status = "okay"; + }; + + lsm9ds1-accel@6a { + compatible = "st,lsm9ds1-accel"; + reg = <0x6a>; + status = "okay"; + }; + + lps25h-press@5c { + compatible = "st,lps25h-press"; + reg = <0x5c>; + status = "okay"; + }; + + hts221-humid@5f { + compatible = "st,hts221-humid\0st,hts221"; + reg = <0x5f>; + status = "okay"; + }; +};
Signature · 1 line
2.31.1
Quoted 4 lines · Charles Mirabile
This patch series adds a set of drivers for operating the Sense HAT peripheral device. This board is an add on for the Raspberry Pi that is designed to connect using the GPIO connector and communicate via I2C.
Is there any feedback left to address? Which tree should take this?
Thanks for your work upstreaming this!
Cheers,
Miguel
A message that is not in the archive (sent off-list or not yet received): CABe3_aE-nQzZazLfxk1OnCNRF0sDqcWi6gieYSf4O4aYS_Ahog@mail.gmail.com
Hi Charles, Miguel,
Quoted 7 lines · Charles Mirabile
Hi Miguel—
Thanks for your help in reviewing this patch. I think all of the feedback is cleared up.
I am not sure which tree this should go into, but maybe the Raspberry Pi tree maintained by Nicolas Saenz Julienne (
git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-
rpi.git)? What do you think? Thanks!
Since there is no code dependency between the different drivers/patches I suggest for each patch to go through its respective maintainer tree. Also, if we were to move the whole series through as single tree, it's important to have ACKs from all the subsystem maintainers.
I'll do a last review during the week.
Regards,
Signature · 7 lines
Nicolás Sáenz _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Am 26.04.22 um 12:18 schrieb Nicolas Saenz Julienne:
Quoted 7 lines
Hi Charles, Miguel,
Quoted 4 lines · Charles Mirabile
Hi Miguel—
Thanks for your help in reviewing this patch. I think all of the feedback is cleared up.
Quoted 7 lines
Quoted 3 lines
I am not sure which tree this should go into, but maybe the Raspberry Pi tree maintained by Nicolas Saenz Julienne (
git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-
rpi.git)? What do you think? Thanks!Since there is no code dependency between the different
drivers/patchesI suggest for each patch to go through its respective maintainer tree. Also, if we were to move the whole series through as single tree, it's important to have ACKs from all the subsystem maintainers.
Yes, we still need a Ack of Rob for the device tree bindings. Please give him the common 2 weeks for a review.
Quoted 5 lines
I'll do a last review during the week.
Regards,
Quoted 8 lines · Stefan Wahren
Am 26.04.22 um 12:18 schrieb Nicolas Saenz Julienne:
Quoted 7 lines
Hi Charles, Miguel,
Quoted 4 lines · Charles Mirabile
Hi Miguel—
Thanks for your help in reviewing this patch. I think all of the feedback is cleared up.
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
I am not sure which tree this should go into, but maybe the Raspberry Pi tree maintained by Nicolas Saenz Julienne (
git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-
rpi.git)? What do you think? Thanks!Since there is no code dependency between the different
drivers/patchesI suggest for each patch to go through its respective maintainer tree. Also, if we were to move the whole series through as single tree, it's important to have ACKs from all the subsystem maintainers.Yes, we still need a Ack of Rob for the device tree bindings. Please give him the common 2 weeks for a review.
You have one from Krzysztof on the bindings, that should be sufficient?
https://docs.kernel.org/process/maintainers.html#open-firmware-and-flattened-device-tree-bindings
Quoted 5 lines
Quoted 5 lines
I'll do a last review during the week.
Regards,
Am 26.04.22 um 14:03 schrieb [email protected]:
Quoted 12 lines · Stefan Wahren
Quoted 11 lines
Am 26.04.22 um 12:18 schrieb Nicolas Saenz Julienne:
Quoted 10 lines
Hi Charles, Miguel,
Quoted 7 lines · Charles Mirabile
Hi Miguel—
Thanks for your help in reviewing this patch. I think all of the feedback is cleared up.
I am not sure which tree this should go into, but maybe the Raspberry Pi tree maintained by Nicolas Saenz Julienne (
git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-
rpi.git)? What do you think? Thanks!
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
Since there is no code dependency between the different
drivers/patchesI suggest for each patch to go through its respective maintainer tree. Also, if we were to move the whole series through as single tree, it's important to have ACKs from all the subsystem maintainers.Yes, we still need a Ack of Rob for the device tree bindings. Please give him the common 2 weeks for a review.
You have one from Krzysztof on the bindings, that should be sufficient?
https://docs.kernel.org/process/maintainers.html#open-firmware-and-flattened-device-tree-bindings
Yes, you are right
Quoted 9 lines
Quoted 5 lines
Quoted 5 lines
I'll do a last review during the week.
Regards,
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Charles,
Am 19.04.22 um 22:51 schrieb Charles Mirabile:
Quoted 47 lines
This patch series adds a set of drivers for operating the Sense HAT peripheral device. This board is an add on for the Raspberry Pi that is designed to connect using the GPIO connector and communicate via I2C.
It features:
- a joystick
- an 8x8 RGB LED matrix display
- a whole bunch of environmental sensors with their own drivers (those are already in upstream Linux)This is a refactor of the work of Serge Schneider, the author of a version of this driver that is currently in the Raspberry Pi downstream kernel. We modified his code to make it suitable for upstream Linux.
A couple of tests are available for the driver in the test folder in this repo: https://github.com/underground-software/sensehat.git
-sensehat_joystick_testlogs the input events from the joystick to the console
-sensehat_display_testdisplays various solid colors on the LED panel.
-full_sensehat_testdisplays a single lit cell that can be moved with the joystick. Pressing the joystick ends the program.For more information about the Sense HAT, visit:
https://www.raspberrypi.org/products/sense-hat/Changes since v8:
- Fixed a few small things in the device tree bindings. I forgot to include the fact that Rob Herring had already reviewed them when I posted v8, so Krzysztof Kozlowski jumped in and offered his input. The suggestions were good so we decided to include them. Sorry for the confusion.
- Corrected a typo in the description of the display driver. The format of the special file used by the driver was changed in v8 and this was described in the cover letter of the patch, but not in the actual note attached to that patch. This is now fixed.Co-developed-by Daniel Bauman <[email protected]>Signed-off-by Daniel Bauman <[email protected]>Co-developed-by Mwesigwa Guma <[email protected]>Signed-off-by Mwesigwa Guma <[email protected]>Co-developed-by Joel Savitz <[email protected]>Signed-off-by Joel Savitz <[email protected]>Signed-off-by Charles Mirabile <[email protected]>
Quoted 8 lines
Charles Mirabile (6):
drivers/mfd: sensehat: Add Raspberry Pi Sense HAT tosimple_mfd_i2cdrivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick
driver
drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver
dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema
MAINTAINERS: Add sensehat driver authors toMAINTAINERSDO NOT MERGE: full sensehat device tree overlay for raspberry pi 4
since only the joystick patch has been applied, could you please send a rebased v10 without the joystick driver?
Please take care of the fact that Florian is the new BCM2835 maintainer.
Thanks