Skip to contentSkip to conversation

amd/msr: implement MSR_VIRT_SPEC_CTRL for HVM guests

PATCH Superseded Roger Pau Monne 2 participants 11 messages Apr 27, 2022 – May 2, 2022

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover amd/msr: implement MSR_VIRT_SPEC_CTRL for HVM guests

Hello,

The following series implements support for MSR_VIRT_SPEC_CTRL (VIRT_SSBD) on different AMD CPU families.

Note that the support is added backwards, starting with the newer CPUs that support MSR_SPEC_CTRL and moving to the older ones either using MSR_VIRT_SPEC_CTRL or the SSBD bit in LS_CFG.

Xen is still free to use it's own SSBD setting, as the selection is context switched on vm{entry,exit}.

On Zen2 and later, SPEC_CTRL.SSBD should exist and should be used in preference to VIRT_SPEC_CTRL.SSBD.  However, for migration compatibility, Xen offers VIRT_SSBD to guests (in the max cpuid policy, not default) implemented in terms of SPEC_CTRL.SSBD.

On Fam15h thru Zen1, Xen exposes VIRT_SSBD to guests by default to abstract away the model and/or hypervisor specific differences in MSR_LS_CFG/MSR_VIRT_SPEC_CTRL.

So the implementation of VIRT_SSBD exposed to HVM guests will use one of the following underlying mechanisms, in the preference order listed below:

* SPEC_CTRL.SSBD: patch 1
* VIRT_SPEC_CTRL.SSBD: patch 2.
* Non-architectural way using LS_CFG: patch 3.

Roger Pau Monne (3):
amd/msr: implement VIRT_SPEC_CTRL for HVM guests on top of SPEC_CTRL amd/msr: allow passthrough of VIRT_SPEC_CTRL for HVM guests amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

 xen/arch/x86/cpu/amd.c                      | 119 +++++++++++++++++---
 xen/arch/x86/cpuid.c                        |  28 +++++
 xen/arch/x86/hvm/hvm.c                      |   1 +
 xen/arch/x86/hvm/svm/entry.S                |   8 ++
 xen/arch/x86/hvm/svm/svm.c                  |  40 +++++++
 xen/arch/x86/include/asm/amd.h              |   4 +
 xen/arch/x86/include/asm/cpufeatures.h      |   1 +
 xen/arch/x86/include/asm/msr.h              |  14 +++
 xen/arch/x86/msr.c                          |  26 +++++
 xen/arch/x86/spec_ctrl.c                    |  12 +-
 xen/include/public/arch-x86/cpufeatureset.h |   2 +-
 11 files changed, 236 insertions(+), 19 deletions(-)
Signature · 1 line
2.35.1
#1 lore raw

PATCH v4 1/3 amd/msr: implement VIRT_SPEC_CTRL for HVM guests on top of SPEC_CTRL

Use the logic to set shadow SPEC_CTRL values in order to implement support for VIRT_SPEC_CTRL (signaled by VIRT_SSBD CPUID flag) for HVM guests. This includes using the spec_ctrl vCPU MSR variable to store the guest set value of VIRT_SPEC_CTRL.SSBD, which will be OR'ed with any SPEC_CTRL values being set by the guest.

On hardware having SPEC_CTRL VIRT_SPEC_CTRL will not be offered by default to guests. VIRT_SPEC_CTRL will only be part of the max CPUID policy so it can be enabled for compatibility purposes.

Use '!' to annotate the feature in order to express that the presence of the bit is not directly tied to its value in the host policy.

---
Changes since v3:
- Use '!' to annotate the feature.

Changes since v2:
- Reword reasoning for using '!s'.
- Trim comment about only setting SSBD bit in spec_ctrl.raw.

Changes since v1:
- Only expose VIRT_SSBD if AMD_SSBD is available on the host.
- Revert change to msr-sc= command line option documentation.
- Only set or clear the SSBD bit of spec_ctrl.

---
 xen/arch/x86/cpuid.c                        |  7 +++++++
 xen/arch/x86/hvm/hvm.c                      |  1 +
 xen/arch/x86/include/asm/msr.h              |  4 ++++
 xen/arch/x86/msr.c                          | 18 ++++++++++++++++++
 xen/arch/x86/spec_ctrl.c                    |  3 ++-
 xen/include/public/arch-x86/cpufeatureset.h |  2 +-
 6 files changed, 33 insertions(+), 2 deletions(-)
xen/arch/x86/cpuid.c +7 -0
index 7e0b395698..979dcf8164 100644
@@ -550,6 +550,13 @@ static void __init calculate_hvm_max_policy(void)
         __clear_bit(X86_FEATURE_IBRSB, hvm_featureset);
         __clear_bit(X86_FEATURE_IBRS, hvm_featureset);
     }
+    else if ( boot_cpu_has(X86_FEATURE_AMD_SSBD) )
+        /*
+         * If SPEC_CTRL.SSBD is available VIRT_SPEC_CTRL.SSBD can be exposed
+         * and implemented using the former. Expose in the max policy only as
+         * the preference is for guests to use SPEC_CTRL.SSBD if available.
+         */
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
 
     /*
      * With VT-x, some features are only supported by Xen if dedicated
xen/arch/x86/hvm/hvm.c +1 -0
index 5b16fb4cd8..db8f95ef7c 100644
@@ -1334,6 +1334,7 @@ static const uint32_t msrs_to_send[] = {
     MSR_INTEL_MISC_FEATURES_ENABLES,
     MSR_IA32_BNDCFGS,
     MSR_IA32_XSS,
+    MSR_VIRT_SPEC_CTRL,
     MSR_AMD64_DR0_ADDRESS_MASK,
     MSR_AMD64_DR1_ADDRESS_MASK,
     MSR_AMD64_DR2_ADDRESS_MASK,
xen/arch/x86/include/asm/msr.h +4 -0
index ce4fe51afe..ab6fbb5051 100644
@@ -291,6 +291,7 @@ struct vcpu_msrs
 {
     /*
      * 0x00000048 - MSR_SPEC_CTRL
+     * 0xc001011f - MSR_VIRT_SPEC_CTRL (if X86_FEATURE_AMD_SSBD)
      *
      * For PV guests, this holds the guest kernel value.  It is accessed on
      * every entry/exit path.
@@ -306,6 +307,9 @@ struct vcpu_msrs
      * We must clear/restore Xen's value before/after VMRUN to avoid unduly
      * influencing the guest.  In order to support "behind the guest's back"
      * protections, we load this value (commonly 0) before VMRUN.
+     *
+     * Once of such "behind the guest's back" usages is setting SPEC_CTRL.SSBD
+     * if the guest sets VIRT_SPEC_CTRL.SSBD.
      */
     struct {
         uint32_t raw;
xen/arch/x86/msr.c +18 -0
index 01a15857b7..72c175fd8b 100644
@@ -381,6 +381,13 @@ int guest_rdmsr(struct vcpu *v, uint32_t msr, uint64_t *val)
                ? K8_HWCR_TSC_FREQ_SEL : 0;
         break;
 
+    case MSR_VIRT_SPEC_CTRL:
+        if ( !cp->extd.virt_ssbd )
+            goto gp_fault;
+
+        *val = msrs->spec_ctrl.raw & SPEC_CTRL_SSBD;
+        break;
+
     case MSR_AMD64_DE_CFG:
         if ( !(cp->x86_vendor & (X86_VENDOR_AMD | X86_VENDOR_HYGON)) )
             goto gp_fault;
@@ -666,6 +673,17 @@ int guest_wrmsr(struct vcpu *v, uint32_t msr, uint64_t val)
             wrmsr_tsc_aux(val);
         break;
 
+    case MSR_VIRT_SPEC_CTRL:
+        if ( !cp->extd.virt_ssbd )
+            goto gp_fault;
+
+        /* Only supports SSBD bit, the rest are ignored. */
+        if ( val & SPEC_CTRL_SSBD )
+            msrs->spec_ctrl.raw |= SPEC_CTRL_SSBD;
+        else
+            msrs->spec_ctrl.raw &= ~SPEC_CTRL_SSBD;
+        break;
+
     case MSR_AMD64_DE_CFG:
         /*
          * OpenBSD 6.7 will panic if writing to DE_CFG triggers a #GP:
xen/arch/x86/spec_ctrl.c +2 -1
index 1408e4c7ab..f338bfe292 100644
@@ -402,12 +402,13 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)
      * mitigation support for guests.
      */
 #ifdef CONFIG_HVM
-    printk("  Support for HVM VMs:%s%s%s%s%s\n",
+    printk("  Support for HVM VMs:%s%s%s%s%s%s\n",
            (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ||
             boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ||
             boot_cpu_has(X86_FEATURE_MD_CLEAR)   ||
             opt_eager_fpu)                           ? ""               : " None",
            boot_cpu_has(X86_FEATURE_SC_MSR_HVM)      ? " MSR_SPEC_CTRL" : "",
+           boot_cpu_has(X86_FEATURE_SC_MSR_HVM)      ? " MSR_VIRT_SPEC_CTRL" : "",
            boot_cpu_has(X86_FEATURE_SC_RSB_HVM)      ? " RSB"           : "",
            opt_eager_fpu                             ? " EAGER_FPU"     : "",
            boot_cpu_has(X86_FEATURE_MD_CLEAR)        ? " MD_CLEAR"      : "");
xen/include/public/arch-x86/cpufeatureset.h +1 -1
index 9cee4b439e..5aa3c82fc6 100644
@@ -265,7 +265,7 @@ XEN_CPUFEATURE(IBRS_SAME_MODE, 8*32+19) /*S  IBRS provides same-mode protection
 XEN_CPUFEATURE(NO_LMSL,       8*32+20) /*S  EFER.LMSLE no longer supported. */
 XEN_CPUFEATURE(AMD_PPIN,      8*32+23) /*   Protected Processor Inventory Number */
 XEN_CPUFEATURE(AMD_SSBD,      8*32+24) /*S  MSR_SPEC_CTRL.SSBD available */
-XEN_CPUFEATURE(VIRT_SSBD,     8*32+25) /*   MSR_VIRT_SPEC_CTRL.SSBD */
+XEN_CPUFEATURE(VIRT_SSBD,     8*32+25) /*!  MSR_VIRT_SPEC_CTRL.SSBD */
 XEN_CPUFEATURE(SSB_NO,        8*32+26) /*A  Hardware not vulnerable to SSB */
 XEN_CPUFEATURE(PSFD,          8*32+28) /*S  MSR_SPEC_CTRL.PSFD */
 
Signature · 1 line
2.35.1
Reviewed-by on v4 1/3
#2 lore raw

Re: [PATCH v4 1/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests on top of SPEC_CTRL

Quoted 10 lines · Roger Pau Monne

Use the logic to set shadow SPEC_CTRL values in order to implement support for VIRT_SPEC_CTRL (signaled by VIRT_SSBD CPUID flag) for HVM guests. This includes using the spec_ctrl vCPU MSR variable to store the guest set value of VIRT_SPEC_CTRL.SSBD, which will be OR'ed with any SPEC_CTRL values being set by the guest.

On hardware having SPEC_CTRL VIRT_SPEC_CTRL will not be offered by default to guests. VIRT_SPEC_CTRL will only be part of the max CPUID policy so it can be enabled for compatibility purposes.

Quoted 5 lines

Use '!' to annotate the feature in order to express that the presence of the bit is not directly tied to its value in the host policy.

#3 lore raw

PATCH v4 2/3 amd/msr: allow passthrough of VIRT_SPEC_CTRL for HVM guests

In reply to Roger Pau Monne

Allow HVM guests access to MSR_VIRT_SPEC_CTRL if the platform Xen is running on has support for it. This requires adding logic in the vm{entry,exit} paths for SVM in order to context switch between the hypervisor value and the guest one. The added handlers for context switch will also be used for the legacy SSBD support.

Introduce a new synthetic feature leaf (X86_FEATURE_VIRT_SC_MSR_HVM) to signal whether VIRT_SPEC_CTRL needs to be handled on guest vm{entry,exit}.

---
Changes since v3:
- Always trap write accesses to VIRT_SPEC_CTRL in order to cache the guest setting.
- Do not use the 'S' annotation for the VIRT_SSBD feature.

Changes since v2:
- Reword part of the commit message regarding annotation change.
- Fix MSR intercept.
- Add handling of VIRT_SPEC_CTRL to guest_{rd,wr}msr when using VIRT_SSBD also.

Changes since v1:
- Introduce virt_spec_ctrl vCPU field.
- Context switch VIRT_SPEC_CTRL on vmentry/vmexit separately from SPEC_CTRL.

---
 xen/arch/x86/cpuid.c                   | 11 ++++++++
 xen/arch/x86/hvm/svm/entry.S           |  8 ++++++
 xen/arch/x86/hvm/svm/svm.c             | 35 ++++++++++++++++++++++++++
 xen/arch/x86/include/asm/cpufeatures.h |  1 +
 xen/arch/x86/include/asm/msr.h         | 10 ++++++++
 xen/arch/x86/msr.c                     | 16 +++++++++---
 xen/arch/x86/spec_ctrl.c               |  9 ++++++-
 7 files changed, 85 insertions(+), 5 deletions(-)
xen/arch/x86/cpuid.c +11 -0
index 979dcf8164..9a8c73f067 100644
@@ -541,6 +541,10 @@ static void __init calculate_hvm_max_policy(void)
          raw_cpuid_policy.basic.sep )
         __set_bit(X86_FEATURE_SEP, hvm_featureset);
 
+    if ( !boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
+        /* Clear VIRT_SSBD if VIRT_SPEC_CTRL is not exposed to guests. */
+        __clear_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
+
     /*
      * If Xen isn't virtualising MSR_SPEC_CTRL for HVM guests (functional
      * availability, or admin choice), hide the feature.
@@ -597,6 +601,13 @@ static void __init calculate_hvm_def_policy(void)
     guest_common_feature_adjustments(hvm_featureset);
     guest_common_default_feature_adjustments(hvm_featureset);
 
+    /*
+     * Only expose VIRT_SSBD if AMD_SSBD is not available, and thus
+     * VIRT_SC_MSR_HVM is set.
+     */
+    if ( boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
+
     sanitise_featureset(hvm_featureset);
     cpuid_featureset_to_policy(hvm_featureset, p);
     recalculate_xstate(p);
xen/arch/x86/hvm/svm/entry.S +8 -0
index 4ae55a2ef6..2f63a2e3c6 100644
@@ -19,6 +19,8 @@
 
         .file "svm/entry.S"
 
+#include <xen/lib.h>
+
 #include <asm/asm_defns.h>
 #include <asm/page.h>
 
@@ -57,6 +59,9 @@ __UNLIKELY_END(nsvm_hap)
 
         clgi
 
+        ALTERNATIVE "", STR(call vmentry_virt_spec_ctrl), \
+                        X86_FEATURE_VIRT_SC_MSR_HVM
+
         /* WARNING! `ret`, `call *`, `jmp *` not safe beyond this point. */
         /* SPEC_CTRL_EXIT_TO_SVM       Req: b=curr %rsp=regs/cpuinfo, Clob: acd */
         .macro svm_vmentry_spec_ctrl
@@ -114,6 +119,9 @@ __UNLIKELY_END(nsvm_hap)
         ALTERNATIVE "", svm_vmexit_spec_ctrl, X86_FEATURE_SC_MSR_HVM
         /* WARNING! `ret`, `call *`, `jmp *` not safe before this point. */
 
+        ALTERNATIVE "", STR(call vmexit_virt_spec_ctrl), \
+                        X86_FEATURE_VIRT_SC_MSR_HVM
+
         stgi
 GLOBAL(svm_stgi_label)
         mov  %rsp,%rdi
xen/arch/x86/hvm/svm/svm.c +35 -0
index 2455835eda..e15c9754d7 100644
@@ -52,6 +52,7 @@
 #include <asm/hvm/svm/svmdebug.h>
 #include <asm/hvm/svm/nestedsvm.h>
 #include <asm/hvm/nestedhvm.h>
+#include <asm/spec_ctrl.h>
 #include <asm/x86_emulate.h>
 #include <public/sched.h>
 #include <asm/hvm/vpt.h>
@@ -610,6 +611,16 @@ static void cf_check svm_cpuid_policy_changed(struct vcpu *v)
     svm_intercept_msr(v, MSR_SPEC_CTRL,
                       cp->extd.ibrs ? MSR_INTERCEPT_NONE : MSR_INTERCEPT_RW);
 
+    /*
+     * Always trap write accesses to VIRT_SPEC_CTRL in order to cache the guest
+     * setting and avoid having to perform a rdmsr on vmexit to get the guest
+     * setting even if VIRT_SSBD is offered to Xen itself.
+     */
+    svm_intercept_msr(v, MSR_VIRT_SPEC_CTRL,
+                      cp->extd.virt_ssbd && cpu_has_virt_ssbd &&
+                      !cpu_has_amd_ssbd ?
+                      MSR_INTERCEPT_WRITE : MSR_INTERCEPT_RW);
+
     /* Give access to MSR_PRED_CMD if the guest has been told about it. */
     svm_intercept_msr(v, MSR_PRED_CMD,
                       cp->extd.ibpb ? MSR_INTERCEPT_NONE : MSR_INTERCEPT_RW);
@@ -3105,6 +3116,30 @@ void svm_vmexit_handler(struct cpu_user_regs *regs)
     vmcb_set_vintr(vmcb, intr);
 }
 
+/* Called with GIF=0. */
+void vmexit_virt_spec_ctrl(void)
+{
+    unsigned int val = opt_ssbd ? SPEC_CTRL_SSBD : 0;
+
+    if ( val == current->arch.msrs->virt_spec_ctrl.raw )
+        return;
+
+    if ( cpu_has_virt_ssbd )
+        wrmsr(MSR_VIRT_SPEC_CTRL, val, 0);
+}
+
+/* Called with GIF=0. */
+void vmentry_virt_spec_ctrl(void)
+{
+    unsigned int val = opt_ssbd ? SPEC_CTRL_SSBD : 0;
+
+    if ( val == current->arch.msrs->virt_spec_ctrl.raw )
+        return;
+
+    if ( cpu_has_virt_ssbd )
+        wrmsr(MSR_VIRT_SPEC_CTRL, current->arch.msrs->virt_spec_ctrl.raw, 0);
+}
+
 /*
  * Local variables:
  * mode: C
xen/arch/x86/include/asm/cpufeatures.h +1 -0
index 7413febd7a..2240547b64 100644
@@ -40,6 +40,7 @@ XEN_CPUFEATURE(SC_VERW_HVM,       X86_SYNTH(24)) /* VERW used by Xen for HVM */
 XEN_CPUFEATURE(SC_VERW_IDLE,      X86_SYNTH(25)) /* VERW used by Xen for idle */
 XEN_CPUFEATURE(XEN_SHSTK,         X86_SYNTH(26)) /* Xen uses CET Shadow Stacks */
 XEN_CPUFEATURE(XEN_IBT,           X86_SYNTH(27)) /* Xen uses CET Indirect Branch Tracking */
+XEN_CPUFEATURE(VIRT_SC_MSR_HVM,   X86_SYNTH(28)) /* MSR_VIRT_SPEC_CTRL exposed to HVM */
 
 /* Bug words follow the synthetic words. */
 #define X86_NR_BUG 1
xen/arch/x86/include/asm/msr.h +10 -0
index ab6fbb5051..460aabe84f 100644
@@ -375,6 +375,16 @@ struct vcpu_msrs
      */
     uint32_t tsc_aux;
 
+    /*
+     * 0xc001011f - MSR_VIRT_SPEC_CTRL (if !X86_FEATURE_AMD_SSBD)
+     *
+     * AMD only. Guest selected value, saved and restored on guest VM
+     * entry/exit.
+     */
+    struct {
+        uint32_t raw;
+    } virt_spec_ctrl;
+
     /*
      * 0xc00110{27,19-1b} MSR_AMD64_DR{0-3}_ADDRESS_MASK
      *
xen/arch/x86/msr.c +12 -4
index 72c175fd8b..a1e268eea9 100644
@@ -385,7 +385,10 @@ int guest_rdmsr(struct vcpu *v, uint32_t msr, uint64_t *val)
         if ( !cp->extd.virt_ssbd )
             goto gp_fault;
 
-        *val = msrs->spec_ctrl.raw & SPEC_CTRL_SSBD;
+        if ( cpu_has_amd_ssbd )
+            *val = msrs->spec_ctrl.raw & SPEC_CTRL_SSBD;
+        else
+            *val = msrs->virt_spec_ctrl.raw;
         break;
 
     case MSR_AMD64_DE_CFG:
@@ -678,10 +681,15 @@ int guest_wrmsr(struct vcpu *v, uint32_t msr, uint64_t val)
             goto gp_fault;
 
         /* Only supports SSBD bit, the rest are ignored. */
-        if ( val & SPEC_CTRL_SSBD )
-            msrs->spec_ctrl.raw |= SPEC_CTRL_SSBD;
+        if ( cpu_has_amd_ssbd )
+        {
+            if ( val & SPEC_CTRL_SSBD )
+                msrs->spec_ctrl.raw |= SPEC_CTRL_SSBD;
+            else
+                msrs->spec_ctrl.raw &= ~SPEC_CTRL_SSBD;
+        }
         else
-            msrs->spec_ctrl.raw &= ~SPEC_CTRL_SSBD;
+            msrs->virt_spec_ctrl.raw = val & SPEC_CTRL_SSBD;
         break;
 
     case MSR_AMD64_DE_CFG:
xen/arch/x86/spec_ctrl.c +8 -1
index f338bfe292..0d5ec877d1 100644
@@ -406,9 +406,12 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps)
            (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ||
             boot_cpu_has(X86_FEATURE_SC_RSB_HVM) ||
             boot_cpu_has(X86_FEATURE_MD_CLEAR)   ||
+            boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) ||
             opt_eager_fpu)                           ? ""               : " None",
            boot_cpu_has(X86_FEATURE_SC_MSR_HVM)      ? " MSR_SPEC_CTRL" : "",
-           boot_cpu_has(X86_FEATURE_SC_MSR_HVM)      ? " MSR_VIRT_SPEC_CTRL" : "",
+           (boot_cpu_has(X86_FEATURE_SC_MSR_HVM) ||
+            boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM)) ? " MSR_VIRT_SPEC_CTRL"
+                                                       : "",
            boot_cpu_has(X86_FEATURE_SC_RSB_HVM)      ? " RSB"           : "",
            opt_eager_fpu                             ? " EAGER_FPU"     : "",
            boot_cpu_has(X86_FEATURE_MD_CLEAR)        ? " MD_CLEAR"      : "");
@@ -1069,6 +1072,10 @@ void __init init_speculation_mitigations(void)
             setup_force_cpu_cap(X86_FEATURE_SC_MSR_HVM);
     }
 
+    /* Support VIRT_SPEC_CTRL.SSBD if AMD_SSBD is not available. */
+    if ( opt_msr_sc_hvm && !cpu_has_amd_ssbd && cpu_has_virt_ssbd )
+        setup_force_cpu_cap(X86_FEATURE_VIRT_SC_MSR_HVM);
+
     /* If we have IBRS available, see whether we should use it. */
     if ( has_spec_ctrl && ibrs )
         default_xen_spec_ctrl |= SPEC_CTRL_IBRS;
Signature · 1 line
2.35.1
#4 lore raw

Re: [PATCH v4 2/3] amd/msr: allow passthrough of VIRT_SPEC_CTRL for HVM guests

Quoted 14 lines · Roger Pau Monne
xen/arch/x86/cpuid.c +4 -0
@@ -541,6 +541,10 @@ static void __init calculate_hvm_max_policy(void)
          raw_cpuid_policy.basic.sep )
         __set_bit(X86_FEATURE_SEP, hvm_featureset);
 
+    if ( !boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
+        /* Clear VIRT_SSBD if VIRT_SPEC_CTRL is not exposed to guests. */
+        __clear_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
+
     /*
      * If Xen isn't virtualising MSR_SPEC_CTRL for HVM guests (functional
      * availability, or admin choice), hide the feature.

xen/arch/x86/cpuid.c static void __init calculate_hvm_def_policy(void) · line 609

Quoted 9 lines
xen/arch/x86/cpuid.c +6 -0
@@ -597,6 +601,13 @@ static void __init calculate_hvm_def_policy(void)
     guest_common_feature_adjustments(hvm_featureset);
     guest_common_default_feature_adjustments(hvm_featureset);
 
+    /*
+     * Only expose VIRT_SSBD if AMD_SSBD is not available, and thus
+     * VIRT_SC_MSR_HVM is set.
+     */
+    if ( boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);

The earlier patch sets the bit in "max" when SC_MSR_HVM && AMD_SSBD. This patch doesn't set the bit in "max" at all (it only clears it in one case as per the earlier hunk), thus leading to "def" holding a set bit which supposedly cannot be set. Irrespective of the feature's '!' annotation I think we'd better not violate "max" >= "def".

Everything else in this patch looks good to me.

Jan

#5 lore raw

PATCH v4 3/3 amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

In reply to Roger Pau Monne

Expose VIRT_SSBD to guests if the hardware supports setting SSBD in the LS_CFG MSR (a.k.a. non-architectural way). Different AMD CPU families use different bits in LS_CFG, so exposing VIRT_SPEC_CTRL.SSBD allows for an unified way of exposing SSBD support to guests on AMD hardware that's compatible migration wise, regardless of what underlying mechanism is used to set SSBD.

Note that on AMD Family 17h and Hygon Family 18h processors the value of SSBD in LS_CFG is shared between threads on the same core, so there's extra logic in order to synchronize the value and have SSBD set as long as one of the threads in the core requires it to be set. Such logic also requires extra storage for each thread state, which is allocated at initialization time.

Do the context switching of the SSBD selection in LS_CFG between hypervisor and guest in the same handler that's already used to switch the value of VIRT_SPEC_CTRL.

---
Changes since v3:
- Align ssbd per-core struct to a cache line.
- Open code a simple spinlock to avoid playing tricks with the lock detector.
- s/ssbd_core/ssbd_ls_cfg/.
- Fix log message wording.
- Fix define name and remove comment.
- Also handle Hygon processors (Fam18h).
- Add changelog entry.

Changes since v2:
- Fix codding style issues.
- Use AMD_ZEN1_MAX_SOCKETS to define the max number of possible sockets in Zen1 systems.

Changes since v1:
- Report legacy SSBD support using a global variable.
- Use ro_after_init for ssbd_max_cores.
- Handle boot_cpu_data.x86_num_siblings < 1.
- Add comment regarding _irqsave usage in amd_set_legacy_ssbd.

---
 xen/arch/x86/cpu/amd.c         | 119 ++++++++++++++++++++++++++++-----
 xen/arch/x86/cpuid.c           |  10 +++
 xen/arch/x86/hvm/svm/svm.c     |   5 ++
 xen/arch/x86/include/asm/amd.h |   4 ++
 xen/arch/x86/spec_ctrl.c       |   4 +-
 5 files changed, 124 insertions(+), 18 deletions(-)
xen/arch/x86/cpu/amd.c +102 -17
index 4999f8be2b..a911e2e50a 100644
@@ -48,6 +48,7 @@ boolean_param("allow_unsafe", opt_allow_unsafe);
 
 /* Signal whether the ACPI C1E quirk is required. */
 bool __read_mostly amd_acpi_c1e_quirk;
+bool __ro_after_init amd_legacy_ssbd;
 
 static inline int rdmsr_amd_safe(unsigned int msr, unsigned int *lo,
 				 unsigned int *hi)
@@ -685,23 +686,10 @@ void amd_init_lfence(struct cpuinfo_x86 *c)
  * Refer to the AMD Speculative Store Bypass whitepaper:
  * https://developer.amd.com/wp-content/resources/124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
  */
-void amd_init_ssbd(const struct cpuinfo_x86 *c)
+static bool set_legacy_ssbd(const struct cpuinfo_x86 *c, bool enable)
 {
 	int bit = -1;
 
-	if (cpu_has_ssb_no)
-		return;
-
-	if (cpu_has_amd_ssbd) {
-		/* Handled by common MSR_SPEC_CTRL logic */
-		return;
-	}
-
-	if (cpu_has_virt_ssbd) {
-		wrmsrl(MSR_VIRT_SPEC_CTRL, opt_ssbd ? SPEC_CTRL_SSBD : 0);
-		return;
-	}
-
 	switch (c->x86) {
 	case 0x15: bit = 54; break;
 	case 0x16: bit = 33; break;
@@ -715,20 +703,117 @@ void amd_init_ssbd(const struct cpuinfo_x86 *c)
 		if (rdmsr_safe(MSR_AMD64_LS_CFG, val) ||
 		    ({
 			    val &= ~mask;
-			    if (opt_ssbd)
+			    if (enable)
 				    val |= mask;
 			    false;
 		    }) ||
 		    wrmsr_safe(MSR_AMD64_LS_CFG, val) ||
 		    ({
 			    rdmsrl(MSR_AMD64_LS_CFG, val);
-			    (val & mask) != (opt_ssbd * mask);
+			    (val & mask) != (enable * mask);
 		    }))
 			bit = -1;
 	}
 
-	if (bit < 0)
+	return bit >= 0;
+}
+
+void amd_init_ssbd(const struct cpuinfo_x86 *c)
+{
+	if (cpu_has_ssb_no)
+		return;
+
+	if (cpu_has_amd_ssbd) {
+		/* Handled by common MSR_SPEC_CTRL logic */
+		return;
+	}
+
+	if (cpu_has_virt_ssbd) {
+		wrmsrl(MSR_VIRT_SPEC_CTRL, opt_ssbd ? SPEC_CTRL_SSBD : 0);
+		return;
+	}
+
+	if (!set_legacy_ssbd(c, opt_ssbd)) {
 		printk_once(XENLOG_ERR "No SSBD controls available\n");
+		if (amd_legacy_ssbd)
+			panic("CPU feature mismatch: no legacy SSBD\n");
+	} else if (c == &boot_cpu_data)
+		amd_legacy_ssbd = true;
+}
+
+static struct ssbd_ls_cfg {
+    bool locked;
+    unsigned int count;
+} __cacheline_aligned *ssbd_ls_cfg;
+static unsigned int __ro_after_init ssbd_max_cores;
+#define AMD_FAM17H_MAX_SOCKETS 2
+
+bool __init amd_setup_legacy_ssbd(void)
+{
+	unsigned int i;
+
+	if ((boot_cpu_data.x86 != 0x17 && boot_cpu_data.x86 != 0x18) ||
+	    boot_cpu_data.x86_num_siblings <= 1)
+		return true;
+
+	/*
+	 * One could be forgiven for thinking that c->x86_max_cores is the
+	 * correct value to use here.
+	 *
+	 * However, that value is derived from the current configuration, and
+	 * c->cpu_core_id is sparse on all but the top end CPUs.  Derive
+	 * max_cpus from ApicIdCoreIdSize which will cover any sparseness.
+	 */
+	if (boot_cpu_data.extended_cpuid_level >= 0x80000008) {
+		ssbd_max_cores = 1u << MASK_EXTR(cpuid_ecx(0x80000008), 0xf000);
+		ssbd_max_cores /= boot_cpu_data.x86_num_siblings;
+	}
+	if (!ssbd_max_cores)
+		return false;
+
+	ssbd_ls_cfg = xzalloc_array(struct ssbd_ls_cfg,
+	                            ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS);
+	if (!ssbd_ls_cfg)
+		return false;
+
+	for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++)
+		/* Record initial state, also applies to any hotplug CPU. */
+		if (opt_ssbd)
+			ssbd_ls_cfg[i].count = boot_cpu_data.x86_num_siblings;
+
+	return true;
+}
+
+void amd_set_legacy_ssbd(bool enable)
+{
+	const struct cpuinfo_x86 *c = &current_cpu_data;
+	struct ssbd_ls_cfg *status;
+
+	if (c->x86 != 0x17 || c->x86_num_siblings <= 1) {
+		BUG_ON(!set_legacy_ssbd(c, enable));
+		return;
+	}
+
+	BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS);
+	BUG_ON(c->cpu_core_id >= ssbd_max_cores);
+	status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores +
+	                      c->cpu_core_id];
+
+	/*
+	 * Open code a very simple spinlock: this function is used with GIF==0
+	 * and different IF values, so would trigger the checklock detector.
+	 * Instead of trying to workaround the detector, use a very simple lock
+	 * implementation: it's better to reduce the amount of code executed
+	 * with GIF==0.
+	 */
+	while ( test_and_set_bool(status->locked) )
+	    cpu_relax();
+	status->count += enable ? 1 : -1;
+	ASSERT(status->count <= c->x86_num_siblings);
+	if (enable ? status->count == 1 : !status->count)
+		BUG_ON(!set_legacy_ssbd(c, enable));
+	barrier();
+	write_atomic(&status->locked, false);
 }
 
 void __init detect_zen2_null_seg_behaviour(void)
xen/arch/x86/cpuid.c +10 -0
index 9a8c73f067..7607155875 100644
@@ -544,6 +544,16 @@ static void __init calculate_hvm_max_policy(void)
     if ( !boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
         /* Clear VIRT_SSBD if VIRT_SPEC_CTRL is not exposed to guests. */
         __clear_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
+    else
+        /*
+         * Expose VIRT_SSBD if VIRT_SPEC_CTRL is supported, as that implies the
+         * underlying hardware is capable of setting SSBD using
+         * non-architectural way or VIRT_SSBD is available.
+         *
+         * Note that if the hardware supports VIRT_SSBD natively this setting
+         * will just override an already set bit.
+         */
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
 
     /*
      * If Xen isn't virtualising MSR_SPEC_CTRL for HVM guests (functional
xen/arch/x86/hvm/svm/svm.c +5 -0
index e15c9754d7..cee11bb244 100644
@@ -3126,6 +3126,8 @@ void vmexit_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, val, 0);
+    else
+         amd_set_legacy_ssbd(opt_ssbd);
 }
 
 /* Called with GIF=0. */
@@ -3138,6 +3140,9 @@ void vmentry_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, current->arch.msrs->virt_spec_ctrl.raw, 0);
+    else
+        amd_set_legacy_ssbd(current->arch.msrs->virt_spec_ctrl.raw &
+                            SPEC_CTRL_SSBD);
 }
 
 /*
xen/arch/x86/include/asm/amd.h +4 -0
index a82382e6bf..6a42f68542 100644
@@ -151,4 +151,8 @@ void check_enable_amd_mmconf_dmi(void);
 extern bool amd_acpi_c1e_quirk;
 void amd_check_disable_c1e(unsigned int port, u8 value);
 
+extern bool amd_legacy_ssbd;
+bool amd_setup_legacy_ssbd(void);
+void amd_set_legacy_ssbd(bool enable);
+
 #endif /* __AMD_H__ */
xen/arch/x86/spec_ctrl.c +3 -1
index 0d5ec877d1..495e6f9405 100644
@@ -22,6 +22,7 @@
 #include <xen/param.h>
 #include <xen/warning.h>
 
+#include <asm/amd.h>
 #include <asm/hvm/svm/svm.h>
 #include <asm/microcode.h>
 #include <asm/msr.h>
@@ -1073,7 +1074,8 @@ void __init init_speculation_mitigations(void)
     }
 
     /* Support VIRT_SPEC_CTRL.SSBD if AMD_SSBD is not available. */
-    if ( opt_msr_sc_hvm && !cpu_has_amd_ssbd && cpu_has_virt_ssbd )
+    if ( opt_msr_sc_hvm && !cpu_has_amd_ssbd &&
+         (cpu_has_virt_ssbd || (amd_legacy_ssbd && amd_setup_legacy_ssbd())) )
         setup_force_cpu_cap(X86_FEATURE_VIRT_SC_MSR_HVM);
 
     /* If we have IBRS available, see whether we should use it. */
Signature · 1 line
2.35.1
#6 lore raw

Re: [PATCH v4 3/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

On 27.04.2022 12:47, Roger Pau Monne wrote:> Changes since v3:> - Align ssbd per-core struct to a cache line.> - Open code a simple spinlock to avoid playing tricks with the lock> detector.> - s/ssbd_core/ssbd_ls_cfg/.> - Fix log message wording.> - Fix define name and remove comment.> - Also handle Hygon processors (Fam18h).> - Add changelog entry.
What is this last line about?

Quoted 22 lines
xen/arch/x86/cpu/amd.c +22 -0
+bool __init amd_setup_legacy_ssbd(void)
+{
+	unsigned int i;
+
+	if ((boot_cpu_data.x86 != 0x17 && boot_cpu_data.x86 != 0x18) ||
+	    boot_cpu_data.x86_num_siblings <= 1)
+		return true;
+
+	/*
+	 * One could be forgiven for thinking that c->x86_max_cores is the
+	 * correct value to use here.
+	 *
+	 * However, that value is derived from the current configuration, and
+	 * c->cpu_core_id is sparse on all but the top end CPUs.  Derive
+	 * max_cpus from ApicIdCoreIdSize which will cover any sparseness.
+	 */
+	if (boot_cpu_data.extended_cpuid_level >= 0x80000008) {
+		ssbd_max_cores = 1u << MASK_EXTR(cpuid_ecx(0x80000008), 0xf000);
+		ssbd_max_cores /= boot_cpu_data.x86_num_siblings;
+	}
+	if (!ssbd_max_cores)
+		return false;

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 782

Quoted 10 lines
xen/arch/x86/cpu/amd.c +10 -0
+
+	ssbd_ls_cfg = xzalloc_array(struct ssbd_ls_cfg,
+	                            ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS);
+	if (!ssbd_ls_cfg)
+		return false;
+
+	for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++)
+		/* Record initial state, also applies to any hotplug CPU. */
+		if (opt_ssbd)
+			ssbd_ls_cfg[i].count = boot_cpu_data.x86_num_siblings;

Perhaps flip if() and for()?

Quoted 18 lines
xen/arch/x86/cpu/amd.c +18 -0
+void amd_set_legacy_ssbd(bool enable)
+{
+	const struct cpuinfo_x86 *c = &current_cpu_data;
+	struct ssbd_ls_cfg *status;
+
+	if (c->x86 != 0x17 || c->x86_num_siblings <= 1) {
+		BUG_ON(!set_legacy_ssbd(c, enable));
+		return;
+	}
+
+	BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS);
+	BUG_ON(c->cpu_core_id >= ssbd_max_cores);
+	status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores +
+	                      c->cpu_core_id];
+
+	/*
+	 * Open code a very simple spinlock: this function is used with GIF==0
+	 * and different IF values, so would trigger the checklock detector.

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 814

Quoted 10 lines
xen/arch/x86/cpu/amd.c +10 -0
+	 * Instead of trying to workaround the detector, use a very simple lock
+	 * implementation: it's better to reduce the amount of code executed
+	 * with GIF==0.
+	 */
+	while ( test_and_set_bool(status->locked) )
+	    cpu_relax();
+	status->count += enable ? 1 : -1;
+	ASSERT(status->count <= c->x86_num_siblings);
+	if (enable ? status->count == 1 : !status->count)
+		BUG_ON(!set_legacy_ssbd(c, enable));

What are the effects of ASSERT() or BUG_ON() triggering in a GIF=0 region?

Quoted 6 lines
xen/arch/x86/cpuid.c +0 -0
@@ -544,6 +544,16 @@ static void __init calculate_hvm_max_policy(void)
     if ( !boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
         /* Clear VIRT_SSBD if VIRT_SPEC_CTRL is not exposed to guests. */
         __clear_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);

xen/arch/x86/cpuid.c static void __init calculate_hvm_max_policy(void) · line 556

Quoted 10 lines
xen/arch/x86/cpuid.c +10 -0
+    else
+        /*
+         * Expose VIRT_SSBD if VIRT_SPEC_CTRL is supported, as that implies the
+         * underlying hardware is capable of setting SSBD using
+         * non-architectural way or VIRT_SSBD is available.
+         *
+         * Note that if the hardware supports VIRT_SSBD natively this setting
+         * will just override an already set bit.
+         */
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);

With the 's' annotation gone from the public header, is this last sentence of the comment actually true? Aiui code near the top of the function would have zapped the bit from hvm_featureset[].

xen/arch/x86/hvm/svm/svm.c void vmexit_virt_spec_ctrl(void) · line 3130

Quoted 8 lines
xen/arch/x86/hvm/svm/svm.c +2 -0
@@ -3126,6 +3126,8 @@ void vmexit_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, val, 0);
+    else
+         amd_set_legacy_ssbd(opt_ssbd);

Nit: Indentation is off by one here. Of course this alone could easily be adjusted while committing.

xen/arch/x86/hvm/svm/svm.c void vmentry_virt_spec_ctrl(void) · line 3145

Quoted 7 lines
xen/arch/x86/hvm/svm/svm.c +3 -0
@@ -3138,6 +3140,9 @@ void vmentry_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, current->arch.msrs->virt_spec_ctrl.raw, 0);
+    else
+        amd_set_legacy_ssbd(current->arch.msrs->virt_spec_ctrl.raw &
+                            SPEC_CTRL_SSBD);

Would seem cheaper to use !val here (and then val for symmetry in the other function).

Jan

#7 lore raw

Re: [PATCH v4 3/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

Quoted 2 lines · Jan Beulich

On 27.04.2022 12:47, Roger Pau Monne wrote:> Changes since v3:> - Align ssbd per-core struct to a cache line.> - Open code a simple spinlock to avoid playing tricks with the lock> detector.> - s/ssbd_core/ssbd_ls_cfg/.> - Fix log message wording.> - Fix define name and remove comment.> - Also handle Hygon processors (Fam18h).> - Add changelog entry.
What is this last line about?

Hm, seems like I forgot to do a patch refresh... So new version will have an entry about adding VIRT_SSBD support to HVM guests. Sorry for spoiling the surprise.

Quoted 26 lines
Quoted 26 lines
xen/arch/x86/cpu/amd.c +26 -0
+bool __init amd_setup_legacy_ssbd(void)
+{
+	unsigned int i;
+
+	if ((boot_cpu_data.x86 != 0x17 && boot_cpu_data.x86 != 0x18) ||
+	    boot_cpu_data.x86_num_siblings <= 1)
+		return true;
+
+	/*
+	 * One could be forgiven for thinking that c->x86_max_cores is the
+	 * correct value to use here.
+	 *
+	 * However, that value is derived from the current configuration, and
+	 * c->cpu_core_id is sparse on all but the top end CPUs.  Derive
+	 * max_cpus from ApicIdCoreIdSize which will cover any sparseness.
+	 */
+	if (boot_cpu_data.extended_cpuid_level >= 0x80000008) {
+		ssbd_max_cores = 1u << MASK_EXTR(cpuid_ecx(0x80000008), 0xf000);
+		ssbd_max_cores /= boot_cpu_data.x86_num_siblings;
+	}
+	if (!ssbd_max_cores)
+		return false;
+
+	ssbd_ls_cfg = xzalloc_array(struct ssbd_ls_cfg,
+	                            ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS);
+	if (!ssbd_ls_cfg)
Quoted 8 lines

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 782

Quoted 6 lines
xen/arch/x86/cpu/amd.c +6 -0
+		return false;
+
+	for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++)
+		/* Record initial state, also applies to any hotplug CPU. */
+		if (opt_ssbd)
+			ssbd_ls_cfg[i].count = boot_cpu_data.x86_num_siblings;

Perhaps flip if() and for()?

Indeed, thanks.

Quoted 23 lines
Quoted 23 lines
xen/arch/x86/cpu/amd.c +23 -0
+void amd_set_legacy_ssbd(bool enable)
+{
+	const struct cpuinfo_x86 *c = &current_cpu_data;
+	struct ssbd_ls_cfg *status;
+
+	if (c->x86 != 0x17 || c->x86_num_siblings <= 1) {
+		BUG_ON(!set_legacy_ssbd(c, enable));
+		return;
+	}
+
+	BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS);
+	BUG_ON(c->cpu_core_id >= ssbd_max_cores);
+	status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores +
+	                      c->cpu_core_id];
+
+	/*
+	 * Open code a very simple spinlock: this function is used with GIF==0
+	 * and different IF values, so would trigger the checklock detector.
+	 * Instead of trying to workaround the detector, use a very simple lock
+	 * implementation: it's better to reduce the amount of code executed
+	 * with GIF==0.
+	 */
+	while ( test_and_set_bool(status->locked) )
Quoted 8 lines

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 814

Quoted 5 lines
xen/arch/x86/cpu/amd.c +5 -0
+	    cpu_relax();
+	status->count += enable ? 1 : -1;
+	ASSERT(status->count <= c->x86_num_siblings);
+	if (enable ? status->count == 1 : !status->count)
+		BUG_ON(!set_legacy_ssbd(c, enable));

What are the effects of ASSERT() or BUG_ON() triggering in a GIF=0 region?

So AFAICT the BUG itself works, the usage of a crash kernel however won't work as it's booted with GIF==0.

Maybe we need to issue an stgi as part of BUG_FRAME if required? (maybe that's too naive...)

Quoted 12 lines
Quoted 12 lines
xen/arch/x86/cpuid.c +6 -0
@@ -544,6 +544,16 @@ static void __init calculate_hvm_max_policy(void)
     if ( !boot_cpu_has(X86_FEATURE_VIRT_SC_MSR_HVM) )
         /* Clear VIRT_SSBD if VIRT_SPEC_CTRL is not exposed to guests. */
         __clear_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);
+    else
+        /*
+         * Expose VIRT_SSBD if VIRT_SPEC_CTRL is supported, as that implies the
+         * underlying hardware is capable of setting SSBD using
+         * non-architectural way or VIRT_SSBD is available.
+         *
Quoted 8 lines

xen/arch/x86/cpuid.c static void __init calculate_hvm_max_policy(void) · line 556

Quoted 4 lines
xen/arch/x86/cpuid.c +4 -0
+         * Note that if the hardware supports VIRT_SSBD natively this setting
+         * will just override an already set bit.
+         */
+        __set_bit(X86_FEATURE_VIRT_SSBD, hvm_featureset);

With the 's' annotation gone from the public header, is this last sentence of the comment actually true? Aiui code near the top of the function would have zapped the bit from hvm_featureset[].

This comment is now gone, and there are no changes to calculate_hvm_max_policy in this patch anymore.

Quoted 14 lines

xen/arch/x86/hvm/svm/svm.c void vmexit_virt_spec_ctrl(void) · line 3130

Quoted 8 lines
xen/arch/x86/hvm/svm/svm.c +2 -0
@@ -3126,6 +3126,8 @@ void vmexit_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, val, 0);
+    else
+         amd_set_legacy_ssbd(opt_ssbd);

Nit: Indentation is off by one here. Of course this alone could easily be adjusted while committing.

Quoted 2 lines
xen/arch/x86/hvm/svm/svm.c +0 -0
@@ -3138,6 +3140,9 @@ void vmentry_virt_spec_ctrl(void)
 
Quoted 8 lines

xen/arch/x86/hvm/svm/svm.c void vmentry_virt_spec_ctrl(void) · line 3145

Quoted 5 lines
xen/arch/x86/hvm/svm/svm.c +3 -0
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, current->arch.msrs->virt_spec_ctrl.raw, 0);
+    else
+        amd_set_legacy_ssbd(current->arch.msrs->virt_spec_ctrl.raw &
+                            SPEC_CTRL_SSBD);

Would seem cheaper to use !val here (and then val for symmetry in the other function).

I could even use !opt_ssbd, and that would be more similar to what's done in vmexit_virt_spec_ctrl?

Thanks, Roger.

#8 lore raw

Re: [PATCH v4 3/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

Quoted 77 lines · Roger Pau Monné
Quoted 2 lines · Jan Beulich

On 27.04.2022 12:47, Roger Pau Monne wrote:> Changes since v3:> - Align ssbd per-core struct to a cache line.> - Open code a simple spinlock to avoid playing tricks with the lock> detector.> - s/ssbd_core/ssbd_ls_cfg/.> - Fix log message wording.> - Fix define name and remove comment.> - Also handle Hygon processors (Fam18h).> - Add changelog entry.
What is this last line about?

Hm, seems like I forgot to do a patch refresh... So new version will have an entry about adding VIRT_SSBD support to HVM guests. Sorry for spoiling the surprise.

Quoted 26 lines
Quoted 26 lines
xen/arch/x86/cpu/amd.c +26 -0
+bool __init amd_setup_legacy_ssbd(void)
+{
+	unsigned int i;
+
+	if ((boot_cpu_data.x86 != 0x17 && boot_cpu_data.x86 != 0x18) ||
+	    boot_cpu_data.x86_num_siblings <= 1)
+		return true;
+
+	/*
+	 * One could be forgiven for thinking that c->x86_max_cores is the
+	 * correct value to use here.
+	 *
+	 * However, that value is derived from the current configuration, and
+	 * c->cpu_core_id is sparse on all but the top end CPUs.  Derive
+	 * max_cpus from ApicIdCoreIdSize which will cover any sparseness.
+	 */
+	if (boot_cpu_data.extended_cpuid_level >= 0x80000008) {
+		ssbd_max_cores = 1u << MASK_EXTR(cpuid_ecx(0x80000008), 0xf000);
+		ssbd_max_cores /= boot_cpu_data.x86_num_siblings;
+	}
+	if (!ssbd_max_cores)
+		return false;
+
+	ssbd_ls_cfg = xzalloc_array(struct ssbd_ls_cfg,
+	                            ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS);
+	if (!ssbd_ls_cfg)
Quoted 8 lines

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 782

Quoted 6 lines
xen/arch/x86/cpu/amd.c +6 -0
+		return false;
+
+	for (i = 0; i < ssbd_max_cores * AMD_FAM17H_MAX_SOCKETS; i++)
+		/* Record initial state, also applies to any hotplug CPU. */
+		if (opt_ssbd)
+			ssbd_ls_cfg[i].count = boot_cpu_data.x86_num_siblings;

Perhaps flip if() and for()?

Indeed, thanks.

Quoted 23 lines
Quoted 23 lines
xen/arch/x86/cpu/amd.c +23 -0
+void amd_set_legacy_ssbd(bool enable)
+{
+	const struct cpuinfo_x86 *c = &current_cpu_data;
+	struct ssbd_ls_cfg *status;
+
+	if (c->x86 != 0x17 || c->x86_num_siblings <= 1) {
+		BUG_ON(!set_legacy_ssbd(c, enable));
+		return;
+	}
+
+	BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS);
+	BUG_ON(c->cpu_core_id >= ssbd_max_cores);
+	status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores +
+	                      c->cpu_core_id];
+
+	/*
+	 * Open code a very simple spinlock: this function is used with GIF==0
+	 * and different IF values, so would trigger the checklock detector.
+	 * Instead of trying to workaround the detector, use a very simple lock
+	 * implementation: it's better to reduce the amount of code executed
+	 * with GIF==0.
+	 */
+	while ( test_and_set_bool(status->locked) )
Quoted 8 lines

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 814

Quoted 5 lines
xen/arch/x86/cpu/amd.c +5 -0
+	    cpu_relax();
+	status->count += enable ? 1 : -1;
+	ASSERT(status->count <= c->x86_num_siblings);
+	if (enable ? status->count == 1 : !status->count)
+		BUG_ON(!set_legacy_ssbd(c, enable));

What are the effects of ASSERT() or BUG_ON() triggering in a GIF=0 region?

Quoted 5 lines

So AFAICT the BUG itself works, the usage of a crash kernel however won't work as it's booted with GIF==0.

Maybe we need to issue an stgi as part of BUG_FRAME if required? (maybe that's too naive...)

Well, better in panic() or kexec_crash() likely.

Roger.

#9 lore raw

Re: [PATCH v4 3/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

Quoted 35 lines · Roger Pau Monné
Quoted 34 lines · Roger Pau Monné
Quoted 32 lines · Jan Beulich
Quoted 18 lines · Roger Pau Monne
xen/arch/x86/cpu/amd.c +18 -0
+void amd_set_legacy_ssbd(bool enable)
+{
+	const struct cpuinfo_x86 *c = &current_cpu_data;
+	struct ssbd_ls_cfg *status;
+
+	if (c->x86 != 0x17 || c->x86_num_siblings <= 1) {
+		BUG_ON(!set_legacy_ssbd(c, enable));
+		return;
+	}
+
+	BUG_ON(c->phys_proc_id >= AMD_FAM17H_MAX_SOCKETS);
+	BUG_ON(c->cpu_core_id >= ssbd_max_cores);
+	status = &ssbd_ls_cfg[c->phys_proc_id * ssbd_max_cores +
+	                      c->cpu_core_id];
+
+	/*
+	 * Open code a very simple spinlock: this function is used with GIF==0
+	 * and different IF values, so would trigger the checklock detector.

xen/arch/x86/cpu/amd.c void amd_init_ssbd(const struct cpuinfo_x86 *c) · line 814

Quoted 10 lines
xen/arch/x86/cpu/amd.c +10 -0
+	 * Instead of trying to workaround the detector, use a very simple lock
+	 * implementation: it's better to reduce the amount of code executed
+	 * with GIF==0.
+	 */
+	while ( test_and_set_bool(status->locked) )
+	    cpu_relax();
+	status->count += enable ? 1 : -1;
+	ASSERT(status->count <= c->x86_num_siblings);
+	if (enable ? status->count == 1 : !status->count)
+		BUG_ON(!set_legacy_ssbd(c, enable));

What are the effects of ASSERT() or BUG_ON() triggering in a GIF=0 region?

Quoted 7 lines
Quoted 5 lines

So AFAICT the BUG itself works, the usage of a crash kernel however won't work as it's booted with GIF==0.

Maybe we need to issue an stgi as part of BUG_FRAME if required? (maybe that's too naive...)

Well, better in panic() or kexec_crash() likely.

Yeah, lifting it too early may be detrimental.

Jan

#10 lore raw

Re: [PATCH v4 3/3] amd/msr: implement VIRT_SPEC_CTRL for HVM guests using legacy SSBD

In reply to Roger Pau Monné
Quoted 13 lines · Roger Pau Monné
Quoted 11 lines · Jan Beulich

xen/arch/x86/hvm/svm/svm.c void vmentry_virt_spec_ctrl(void) · line 3145

Quoted 7 lines · Roger Pau Monne
xen/arch/x86/hvm/svm/svm.c +3 -0
@@ -3138,6 +3140,9 @@ void vmentry_virt_spec_ctrl(void)
 
     if ( cpu_has_virt_ssbd )
         wrmsr(MSR_VIRT_SPEC_CTRL, current->arch.msrs->virt_spec_ctrl.raw, 0);
+    else
+        amd_set_legacy_ssbd(current->arch.msrs->virt_spec_ctrl.raw &
+                            SPEC_CTRL_SSBD);

Would seem cheaper to use !val here (and then val for symmetry in the other function).

Quoted 2 lines

I could even use !opt_ssbd, and that would be more similar to what's done in vmexit_virt_spec_ctrl?

Might be an option, yet when using "val" there as well I don't see benefit similarity-wise. Using a local variable would imo still be cheaper than accessing a global one. But that's a matter of taste to a fair degree, so I'll leave it to you - all I'd really prefer to have is the functions using as similar / symmetric as possible conditions.

Jan