arm64: dts: mt8192: Follow binding order for SCP registers
Subsystems (2)
PATCH v2 1/1 arm64: dts: mt8192: Follow binding order for SCP registers
The dt-binding for SCP documents the reg-names order as sram, cfg, l1tcm. Update the SCP node on the mt8192 devicetree to follow that order, which gets rid of a dtbs_check warning. This doesn't change any behavior since the SCP driver accesses the memory regions through the names anyway.
---
Changes in v2:
- Added missing Fixes tag
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/boot/dts/mediatek/mt8192.dtsi +3 -3
@@ -699,9 +699,9 @@ spi7: spi@1101e000 { scp: scp@10500000 { compatible = "mediatek,mt8192-scp"; reg = <0 0x10500000 0 0x100000>, - <0 0x10700000 0 0x8000>, - <0 0x10720000 0 0xe0000>; - reg-names = "sram", "l1tcm", "cfg"; + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&infracfg CLK_INFRA_SCPSYS>; clock-names = "main";
Signature · 1 line
2.36.0
Quoted 9 lines · Nícolas F. R. A. Prado
The dt-binding for SCP documents the reg-names order as sram, cfg, l1tcm. Update the SCP node on the mt8192 devicetree to follow that order, which gets rid of a
dtbs_checkwarning. This doesn't change any behavior since the SCP driver accesses the memory regions through the names anyway.Fixes c63556ec6bfe ("arm64: dts: mt8192: Add SCP node")Signed-off-by Nícolas F. R. A. Prado <[email protected]>
Il 04/05/22 23:45, Nícolas F. R. A. Prado ha scritto:
Quoted 8 lines
The dt-binding for SCP documents the reg-names order as sram, cfg, l1tcm. Update the SCP node on the mt8192 devicetree to follow that order, which gets rid of a
dtbs_checkwarning. This doesn't change any behavior since the SCP driver accesses the memory regions through the names anyway.Fixes c63556ec6bfe ("arm64: dts: mt8192: Add SCP node")Signed-off-by Nícolas F. R. A. Prado <[email protected]>
Now, that's perfect! Thanks!
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Matthias Brugger
maintainerQuoted 9 lines · Nícolas F. R. A. Prado
The dt-binding for SCP documents the reg-names order as sram, cfg, l1tcm. Update the SCP node on the mt8192 devicetree to follow that order, which gets rid of a
dtbs_checkwarning. This doesn't change any behavior since the SCP driver accesses the memory regions through the names anyway.Fixes c63556ec6bfe ("arm64: dts: mt8192: Add SCP node")Signed-off-by Nícolas F. R. A. Prado <[email protected]>
Applied thanks!
Quoted 15 lines
---
Changes in v2:
- Added missing Fixes tagarch/arm64/boot/dts/mediatek/mt8192.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)arch/arm64/boot/dts/mediatek/mt8192.dtsi +0
-0@@ -699,9 +699,9 @@ spi7: spi@1101e000 { scp: scp@10500000 { compatible = "mediatek,mt8192-scp";
arch/arm64/boot/dts/mediatek/mt8192.dtsi spi7: spi@1101e000 { · line 707
Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt8192.dtsi +3
-3reg = <0 0x10500000 0 0x100000>, - <0 0x10700000 0 0x8000>, - <0 0x10720000 0 0xe0000>; - reg-names = "sram", "l1tcm", "cfg"; + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&infracfg CLK_INFRA_SCPSYS>; clock-names = "main";
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek